airship
/
drydock
Code Issues Proposed changes
drydock/python/tests/yaml_samples/fullsite_networks.yaml

220 lines
6.2 KiB
YAML
Raw Blame History

# Copyright 2017 AT&T Intellectual Property. All other rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
####################
#
# bootstrap_seed.yaml - Site server design definition for physical layer
#
####################
# version the schema in this file so consumers can rationally parse it
---
apiVersion: 'v1.0'
kind: NetworkLink
metadata:
name: oob
region: sitename
date: 17-FEB-2017
author: sh8121@att.com
description: Describe layer 1 attributes. Primary key is 'name'. These settings will generally be things the switch and server have to agree on
spec:
bonding:
mode: disabled
mtu: 1500
linkspeed: 100full
trunking:
mode: disabled
default_network: oob
---
# pxe is a bit of 'magic' indicating the link config used when PXE booting
# a node. All other links indicate network configs applied when the node
# is deployed.
apiVersion: 'v1.0'
kind: NetworkLink
metadata:
name: pxe
region: sitename
date: 17-FEB-2017
author: sh8121@att.com
description: Describe layer 1 attributes. Primary key is 'name'. These settings will generally be things the switch and server have to agree on
spec:
bonding:
mode: disabled
mtu: 1500
linkspeed: auto
# Is this link supporting multiple layer 2 networks?
# none is a port-based VLAN identified by default_network
# tagged is using 802.1q VLAN tagging. Untagged packets will default to default_netwokr
trunking:
mode: disabled
# use name, will translate to VLAN ID
default_network: pxe
---
apiVersion: 'v1.0'
kind: NetworkLink
metadata:
name: gp
region: sitename
date: 17-FEB-2017
author: sh8121@att.com
description: Describe layer 1 attributes. These CIs will generally be things the switch and server have to agree on
# pxe is a bit of 'magic' indicating the link config used when PXE booting
# a node. All other links indicate network configs applied when the node
# is deployed.
spec:
# If this link is a bond of physical links, how is it configured
# 802.3ad
# active-backup
# balance-rr
# Can add support for others down the road
bonding:
mode: 802.3ad
# For LACP (802.3ad) xmit hashing policy: layer2, layer2+3, layer3+4, encap3+4
hash: layer3+4
# 802.3ad specific options
peer_rate: slow
mtu: 9000
linkspeed: auto
# Is this link supporting multiple layer 2 networks?
trunking:
mode: 802.1q
default_network: mgmt
---
apiVersion: 'v1.0'
kind: Network
metadata:
name: oob
region: sitename
date: 17-FEB-2017
author: sh8121@att.com
description: Describe layer 2/3 attributes. Primarily CIs used for configuring server interfaces
spec:
cidr: 172.16.100.0/24
ranges:
- type: static
start: 172.16.100.15
end: 172.16.100.254
dns:
domain: ilo.sitename.att.com
servers: 172.16.100.10
---
apiVersion: 'v1.0'
kind: Network
metadata:
name: pxe
region: sitename
date: 17-FEB-2017
author: sh8121@att.com
description: Describe layer 2/3 attributes. Primarily CIs used for configuring server interfaces
spec:
# Layer 2 VLAN segment id, could support other segmentations. Optional
vlan_id: '99'
# MTU for this VLAN interface, if not specified it will be inherited from the link
mtu: 1500
# Network address
cidr: 172.16.0.0/24
# Desribe IP address ranges
ranges:
- type: dhcp
start: 172.16.0.5
end: 172.16.0.254
# DNS settings for this network
dns:
# Domain addresses on this network will be registered under
domain: admin.sitename.att.com
# DNS servers that a server using this network as its default gateway should use
servers: 172.16.0.10
---
apiVersion: 'v1.0'
kind: Network
metadata:
name: mgmt
region: sitename
date: 17-FEB-2017
author: sh8121@att.com
description: Describe layer 2/3 attributes. Primarily CIs used for configuring server interfaces
spec:
vlan_id: '100'
# How are addresses assigned?
# Allow MTU to be inherited from link the network rides on
mtu: 1500
# Network address
cidr: 172.16.1.0/24
# Desribe IP address ranges
ranges:
- type: static
start: 172.16.1.15
end: 172.16.1.254
# Static routes to be added for this network
routes:
- subnet: 0.0.0.0/0
# A blank gateway would leave to a static route specifying
# only the interface as a source
gateway: 172.16.1.1
metric: 10
# DNS settings for this network
dns:
# Domain addresses on this network will be registered under
domain: mgmt.sitename.example.com
# DNS servers that a server using this network as its default gateway should use
servers: 172.16.1.9,172.16.1.10
---
apiVersion: 'v1.0'
kind: Network
metadata:
name: private
region: sitename
date: 17-FEB-2017
author: sh8121@att.com
description: Describe layer 2/3 attributes. Primarily CIs used for configuring server interfaces
spec:
vlan_id: '101'
mtu: 9000
cidr: 172.16.2.0/24
# Desribe IP address ranges
ranges:
# Type can be reserved (not used for baremetal), static (all explicit
# assignments should fall here), dhcp (will be used by a DHCP server on this network)
- type: static
start: 172.16.2.15
end: 172.16.2.254
dns:
domain: priv.sitename.example.com
servers: 172.16.2.9,172.16.2.10
---
apiVersion: 'v1.0'
kind: Network
metadata:
name: public
region: sitename
date: 17-FEB-2017
author: sh8121@att.com
description: Describe layer 2/3 attributes. Primarily CIs used for configuring server interfaces
spec:
vlan_id: '102'
# How are addresses assigned?
# MTU size for the VLAN interface
mtu: 1500
cidr: 172.16.3.0/24
# Desribe IP address ranges
ranges:
- type: static
start: 172.16.3.15
end: 172.16.3.254
routes:
- subnet: 0.0.0.0/0
gateway: 172.16.3.1
metric: 9
dns:
domain: sitename.example.com
servers: 8.8.8.8
View Git Blame Copy Permalink