image-builder/profiles
dt241s 181d25e131 Upgrade Image bundle to support k8s 1.21.2.
Change-Id: I7c4be72fbb9ae3dc753437e359af9736366b5041
Signed-off-by: diwakar thyagaraj <dt241s@att.com>
2021-10-12 14:32:44 +00:00
..
k8s-1.18/manifests/rootfs Demonstrate how to upgrade specific components of image bundle 2021-09-23 13:53:09 -04:00
k8s-1.19/manifests/rootfs Demonstrate how to upgrade specific components of image bundle 2021-09-23 13:53:09 -04:00
k8s-1.21/manifests/rootfs Upgrade Image bundle to support k8s 1.21.2. 2021-10-12 14:32:44 +00:00
README.md Demonstrate how to upgrade specific components of image bundle 2021-09-23 13:53:09 -04:00

README.md

Directory structure:

|-- profiles
  |-- profile1
    |-- manifests
    |-- iso
        +-- network_data.json
        +-- user_data
    |-- qcow-bundle-[bundle name]
        |-- control-plane
        +-- osconfig-vars.yaml
        +-- qcow-vars.yaml
        |-- data-plane
        +-- osconfig-vars.yaml
        +-- qcow-vars.yaml
    |-- rootfs
        |-- livecdcontent-vars.yaml
        |-- multistrap-vars.yaml
        |-- osconfig-vars.yaml
    |-- scripts
        |-- common
        |-- qcow

profiles

This directory allows multiple bundle modifications to be created. It serves the same purpose as the manifests directory just expands on it's utility.

The folder structure is the same as the manifests directory. Create a new profile folder and copy the contents of manifests into it. Make your modifications and add the profile=profile1 flag to the make images command.

The profile will copy only the modified files into the manifests folder.

iso

The image-builder generate_iso makefile target can be used to build the ephemeral ISO using the test config data stored under the manifests/iso directory.

This is only for testing. It is not an artifact promoted or published. The final ISO is built by airshipctl, where the network_data and user_data are sourced from airshipctl manifests.

The following items are expected in the manifests/iso directory when using the generate_iso makefile target:

  • user_data - YAML file containing cloud-init user-data
  • network_data.json - JSON file containing cloud-init network data

qcow-bundles

The image-builder package_qcow makefile target can be used to build the QCOW artifacts sourced from the manifests/qcow-bundle-* directories.

QCOWs are grouped into publishable "bundles", i.e. a container image where all QCOWs needed for a given deployment are stored. A bundle will be built for each manifests/qcow-bundle* directory. Each manifests/qcow-bundle* directory contains one subdirectory per QCOW that is part of that bundle, where overrides for those images can be placed.

QCOWs expect the following files to be present in their directory:

  • osconfig-vars.yaml - YAML file containing osconfig playbook overrides
  • qcow-vars.yaml - YAML file containing qcow playboook overrides

rootfs

This directory contains a number of image-builder ansible playbook overrides which are applied to base-image inherited by all ISO and QCOWs.

livecdcontent-vars.yaml contains overrides to the livecdcontent playbook.

multistrap-vars.yaml contains overrides to the multistrap playbook.

osconfig-vars.yaml contains overrides to the osconfig playbook. NOTE: qcow-bundles contains another level of osconfig-vars overrides, which are applied on top of these common overrides. This common osconfig-vars overrides should be used for playbook overrides, except in cases where those overrides are actually unique to a particular QCOW variation (e.g., hugepages, cpu pinning, or other hardware-specific configs).

scripts

This is a convenience directory for adding scripts that run when building images. These scripts run in the chroot of the target image. For example, a script that writes 'hello world' to /hello-world.txt will appear in the same path on the target image.

Use the manifests/scripts/qcow directory for scripts that should only run when building the QCOWs. Use the manifests/scripts/common directory for scripts that are applied to the base container image, which is inherited both by the QCOWs as well as by the ephemeral ISO.

No additional configuration is needed for these scripts to run. Just add your script(s) to these directories as needed.

Customizing images in your environment

Keep in mind that some tasks could also be accomplished by cloud-init or by the hostconfig operator instead. Refer to the parent image-builder README to understand the different use-cases for each and to determine the best option for your use-case. These are lower-effort paths if they support your use-case.

If you determine that you do require image customizations, start with a manual image build to reduce complexity:

  1. Clone this repository in your environment.
  2. Make any desired changes to the manifests directory to customize the image, as described in prior sections.
  3. Perform a docker login to the docker registry you will publish image artifacts to. This should be a registry you have credentials for and that is accessible by the environment which you plan to consume these artifacts, (e.g., airshipctl).
  4. Run the make images target to generate image artifacts. Ensure that the PUSH_IMAGE environment variable is set to true, and that the DOCKER_REGISTRY environment variable is set to the container image repository you performed the login for in the previous step.

Perform an end-to-end to deployment (e.g., with airshipctl) to verify your customized image performs as you expect and works properly.

Now after getting this working, there are several options to proceed depending on the nature of the changes:

  1. Some set of changes to defaults could be proposed upstream (e.g., package install list). This may be appropriate for changes that are useful for everyone. In this case, you don't need a custom image because the changes will be reflected in the image produced upstream.
  2. Some enhancements or additions to ansible playbooks to configure some other aspects of the image, which are useful for everyone and proposed upstream. In this case, you would be able to leverage ansible overrides to customize your image with ansible playbooks that are maintained/adopted upstream.
  3. Some change to image configuration that is specific to your needs and not appropriate to be upstreamed.

In the case of #2 or #3 where you have some portion of image config changes that are specific to your use-case (i.e. not part of the default upstream image), and you want to perform regular rebuilds with the latest upstream image-builder plus your customized changes on top, then you can setup a Zuul child-job that interfaces with the image-builder parent-job to accomplish this.

By overriding the image_config_dir zuul variable in your child-job, the image-builder Makefile will use use your customized manifests in place of the manifests directory that is present in upstream image-builder.