treasuremap/site/seaworthy/baremetal/nodes.yaml

255 lines
9.6 KiB
YAML

---
# Drydock BaremetalNode resources for a specific rack are stored in this file.
#
# NOTE: For new sites, you should complete the networks/physical/networks.yaml
# file before working on this file.
#
# In this file, you should make the number of `drydock/BaremetalNode/v1`
# resources equal the number of bare metal nodes you have, either by deleting
# excess BaremetalNode definitions (if there are too many), or by copying and
# pasting the last BaremetalNode in the file until you have the correct number
# of baremetal nodes (if there are too few).
#
# Then in each file, address all additional NEWSITE-CHANGEME markers to update
# the data in these files with the right values for your new site.
#
# *NOTE: The Genesis node is counted as one of the control plane nodes. Note
# that the Genesis node does not appear on this bare metal list, because the
# procedure to reprovision the Genesis host with MaaS has not yet been
# implemented. Therefore there will be only three bare metal nodes in this file
# with the 'masters' tag, as the genesis roles are assigned in a difference
# place (profiles/genesis.yaml).
# NOTE: The host profiles for the control plane are further divided into two
# variants: primary and secondary. The only significance this has is that the
# "primary" nodes are active Ceph nodes, whereas the "secondary" nodes are Ceph
# standby nodes. For Ceph quorum, this means that the control plane split will
# be 3 primary + 1 standby host profile, and the Genesis node counts toward one
# of the 3 primary profiles. Other control plane services are not affected by
# primary vs secondary designation.
#
# TODO: Include the hostname naming convention
#
schema: 'drydock/BaremetalNode/v1'
metadata:
schema: 'metadata/Document/v1'
# NEWSITE-CHANGEME: Replace with the hostname of the first node in the rack,
# after (excluding) genesis.
name: cab23-r720-12
layeringDefinition:
abstract: false
layer: site
storagePolicy: cleartext
data:
# NEWSITE-CHANGEME: The IPv4 address assigned to each logical network on this
# node. In the reference Airship deployment, this is all logical Networks defined
# in networks/physical/networks.yaml. IP addresses are manually assigned, by-hand.
# (what could possibly go wrong!) The instructions differ for each logical
# network, which are laid out below.
addressing:
# The iDrac/iLo IP of the node. It's important that this match up with the
# node's hostname above, so that the rack number and node position encoded
# in the hostname are accurate and matching the node that IPMI operations
# will be performed against (for poweron, poweroff, PXE boot to wipe disk or
# reconfigure identity, etc - very important to get right for these reasons).
# These addresses should already be assigned to nodes racked and stacked in
# the environment; these are not addresses which MaaS assigns.
- network: oob
address: 10.23.104.12
# The IP of the node on the PXE network. Refer to the static IP range
# defined for the PXE network in networks/physical/networks.yaml. Begin allocating
# IPs from this network, starting with the second IP (inclusive) from the
# allocation range of this subnet (Genesis node will have the first IP).
# Ex: If the start IP for the PXE "static" network is 10.23.20.11, then
# genesis will have 10.23.20.11, this node will have 10.23.20.12, and
# so on with incrementing IP addresses with each additional node.
- network: pxe
address: 10.23.20.12
# Genesis node gets first IP, all other nodes increment IPs from there
# within the allocation range defined for the network in
# networks/physical/networks.yaml
- network: oam
address: 10.23.21.12
# Genesis node gets first IP, all other nodes increment IPs from there
# within the allocation range defined for the network in
# networks/physical/networks.yaml
- network: storage
address: 10.23.23.12
# Genesis node gets first IP, all other nodes increment IPs from there
# within the allocation range defined for the network in
# networks/physical/networks.yaml
- network: overlay
address: 10.23.24.12
# Genesis node gets first IP, all other nodes increment IPs from there
# within the allocation range defined for the network in
# networks/physical/networks.yaml
- network: calico
address: 10.23.22.12
# NEWSITE-CHANGEME: Set the host profile for the node.
# Note that there are different host profiles depending if this is a control
# plane vs data plane node, and different profiles that map to different types
# hardware. Control plane host profiles are further broken down into "primary"
# and "secondary" profiles (refer to the Notes section at the top of this doc).
# Select the host profile that matches up to your type of
# hardware and function. E.g., the r720 here refers to Dell R720 hardware, the
# 'cp' refers to a control plane profile, and the "primary" means it will be
# an active member in the ceph quorum. Refer to profiles/host/ for the list
# of available host profiles specific to this site (otherwise, you may find
# a general set of host profiles at the "type" or "global" layers/folders.
# If you have hardware that is not on this list of profiles, you may need to
# create a new host profile for that hardware.
# Regarding control plane vs other data plane profiles, refer to the notes at
# the beginning of this file. There should be one control plane node per rack,
# including Genesis. Note Genesis won't actually be listed in this file as a
# BaremetalNode, but the rest are.
# This is the second "primary" control plane node after Genesis.
host_profile: cp_r720-primary
metadata:
tags:
# NEWSITE-CHANGEME: See previous comment. Apply 'masters' tag for control
# plane node, and 'workers' tag for data plane hosts.
- 'masters'
# NEWSITE-CHANGEME: Refer to site engineering package or other supporting
# documentation for the specific rack name. This should be a rack name that
# is meaningful to data center personnel (i.e. a rack they could locate if
# you gave them this rack designation).
rack: cab23
...
---
schema: 'drydock/BaremetalNode/v1'
metadata:
schema: 'metadata/Document/v1'
# NEWSITE-CHANGEME: The next node's hostname
name: cab23-r720-13
layeringDefinition:
abstract: false
layer: site
storagePolicy: cleartext
data:
# NEWSITE-CHANGEME: The next node's IPv4 addressing
addressing:
- network: oob
address: 10.23.104.13
- network: pxe
address: 10.23.20.13
- network: oam
address: 10.23.21.13
- network: storage
address: 10.23.23.13
- network: overlay
address: 10.23.24.13
- network: calico
address: 10.23.22.13
# NEWSITE-CHANGEME: The next node's host profile
host_profile: cp_r720-primary
metadata:
# NEWSITE-CHANGEME: The next node's rack designation
rack: cab23
# NEWSITE-CHANGEME: The next node's role desigatnion
tags:
- 'masters'
...
---
schema: 'drydock/BaremetalNode/v1'
metadata:
schema: 'metadata/Document/v1'
# NEWSITE-CHANGEME: The next node's hostname
name: cab23-r720-14
layeringDefinition:
abstract: false
layer: site
storagePolicy: cleartext
data:
# NEWSITE-CHANGEME: The next node's IPv4 addressing
addressing:
- network: oob
address: 10.23.104.14
- network: pxe
address: 10.23.20.14
- network: oam
address: 10.23.21.14
- network: storage
address: 10.23.23.14
- network: overlay
address: 10.23.24.14
- network: calico
address: 10.23.22.14
# NEWSITE-CHANGEME: The next node's host profile
# This is the third "primary" control plane profile after genesis
host_profile: dp_r720
metadata:
# NEWSITE-CHANGEME: The next node's rack designation
rack: cab23
# NEWSITE-CHANGEME: The next node's role desigatnion
tags:
- 'workers'
...
---
schema: 'drydock/BaremetalNode/v1'
metadata:
schema: 'metadata/Document/v1'
# NEWSITE-CHANGEME: The next node's hostname
name: cab23-r720-16
layeringDefinition:
abstract: false
layer: site
storagePolicy: cleartext
data:
# NEWSITE-CHANGEME: The next node's IPv4 addressing
addressing:
- network: oob
address: 10.23.104.16
- network: pxe
address: 10.23.20.16
- network: oam
address: 10.23.21.16
- network: storage
address: 10.23.23.16
- network: overlay
address: 10.23.24.16
- network: calico
address: 10.23.22.16
# NEWSITE-CHANGEME: The next node's host profile
host_profile: dp_r720
metadata:
# NEWSITE-CHANGEME: The next node's rack designation
rack: cab23
# NEWSITE-CHANGEME: The next node's role desigatnion
tags:
- 'workers'
...
---
schema: 'drydock/BaremetalNode/v1'
metadata:
schema: 'metadata/Document/v1'
# NEWSITE-CHANGEME: The next node's hostname
name: cab23-r720-17
layeringDefinition:
abstract: false
layer: site
storagePolicy: cleartext
data:
# NEWSITE-CHANGEME: The next node's IPv4 addressing
addressing:
- network: oob
address: 10.23.104.17
- network: pxe
address: 10.23.20.17
- network: oam
address: 10.23.21.17
- network: storage
address: 10.23.23.17
- network: overlay
address: 10.23.24.17
- network: calico
address: 10.23.22.17
# NEWSITE-CHANGEME: The next node's host profile
# This is the one and only appearance of the "secondary" control plane profile
host_profile: dp_r720
metadata:
# NEWSITE-CHANGEME: The next node's rack designation
rack: cab23
# NEWSITE-CHANGEME: The next node's role desigatnion
tags:
- 'workers'
...