fix spelling errors

Change-Id: I42b6bb46a9e5574f88ec5c0cb5726a65353a4fd7

doc/source/definition.rst

@@ -367,7 +367,7 @@ It's possible to assign an `id` to any of the blocks and then use that
 to reference it instead of the name. This has two primary functions:
 
 * A unique identifier where you wish to use the same naming format for
-  multiple templates. This allows to follow a naming scheme while
+  multiple templates. This allows you to follow a naming scheme while
   still using multiple templates to handle subtle variables in job
   requirements.
 * Provides a simpler name for a `job-template` where you have multiple

jenkins_jobs/modules/builders.py

@@ -798,7 +798,7 @@ def http_request(registry, xml_parent, data):
         being called (default false)
     :arg str valid-response-codes: Configure response code to mark an
         execution as success. You can configure simple code such as "200"
-        or multiple codes separeted by comma(',') e.g. "200,404,500"
+        or multiple codes separated by comma(',') e.g. "200,404,500"
         Interval of codes should be in format From:To e.g. "100:399".
         The default (as if empty) is to fail to 4xx and 5xx.
         That means success from 100 to 399 "100:399"
@@ -1341,9 +1341,9 @@ def conditional_step(registry, xml_parent, data):
                            :SCRIPT_CAUSE: build was triggered by a script
                              (ScriptTrigger Plugin)
                            :BUILDRESULT_CAUSE: build was triggered by a
-                             result of an other job (BuildResultTrigger Plugin)
+                             result of another job (BuildResultTrigger Plugin)
                          :exclusive-cause: (bool) There might by multiple
-                           casues causing a build to be triggered, with
+                           causes causing a build to be triggered, with
                            this true, the cause must be the only one
                            causing this build this build to be triggered.
                            (default false)
@@ -2171,7 +2171,7 @@ def sbt(registry, xml_parent, data):
 
 def critical_block_start(registry, xml_parent, data):
     """yaml: critical-block-start
-    Designate the start of a critical block. Must be used in conjuction with
+    Designate the start of a critical block. Must be used in conjunction with
     critical-block-end.
 
     Must also add a build wrapper (exclusion), specifying the resources that
@@ -2192,7 +2192,7 @@ def critical_block_start(registry, xml_parent, data):
 
 def critical_block_end(registry, xml_parent, data):
     """yaml: critical-block-end
-    Designate the end of a critical block. Must be used in conjuction with
+    Designate the end of a critical block. Must be used in conjunction with
     critical-block-start.
 
     Must also add a build wrapper (exclusion), specifying the resources that
@@ -2553,7 +2553,7 @@ def tox(registry, xml_parent, data):
 
 def managed_script(registry, xml_parent, data):
     """yaml: managed-script
-    This step allows to reference and execute a centrally managed
+    This step allows you to reference and execute a centrally managed
     script within your build. Requires the Jenkins
     :jenkins-wiki:`Managed Script Plugin <Managed+Script+Plugin>`.
 
@@ -3012,7 +3012,7 @@ def sonar(registry, xml_parent, data):
 
 def xcode(registry, xml_parent, data):
     """yaml: xcode
-    This step allows to execute an xcode build step. Requires the Jenkins
+    This step allows you to execute an xcode build step. Requires the Jenkins
     :jenkins-wiki:`Xcode Plugin <Xcode+Plugin>`.
 
     :arg str developer-profile: the jenkins credential id for a
@@ -3963,7 +3963,7 @@ def nexus_artifact_uploader(registry, xml_parent, data):
 
 def ansible_playbook(parser, xml_parent, data):
     """yaml: ansible-playbook
-    This plugin allows to execute Ansible tasks as a job build step.
+    This plugin allows you to execute Ansible tasks as a job build step.
     Requires the Jenkins :jenkins-wiki:`Ansible Plugin <Ansible+Plugin>`.
 
     :arg str playbook: Path to the ansible playbook file. The path can be
@@ -4001,7 +4001,7 @@ def ansible_playbook(parser, xml_parent, data):
         empty. (default '')
     :arg bool unbuffered-output: Skip standard output buffering for the ansible
         process. The ansible output is directly rendered into the Jenkins
-        console. This option can be usefull for long running operations.
+        console. This option can be useful for long running operations.
         (default true)
     :arg bool colorized-output: Check this box to allow ansible to render ANSI
         color codes in the Jenkins console. (default false)
@@ -4114,7 +4114,7 @@ def ansible_playbook(parser, xml_parent, data):
 
 def nodejs(parser, xml_parent, data):
     """yaml: nodejs
-    This plugin allows to execute NodeJS scripts as a job build step.
+    This plugin allows you to execute NodeJS scripts as a job build step.
     Requires the Jenkins :jenkins-wiki:`NodeJS Plugin <NodeJS+Plugin>`.
 
     :arg str name: NodeJS installation name

jenkins_jobs/modules/parameters.py

@@ -888,7 +888,7 @@ def random_string_param(registry, xml_parent, data):
 
 def git_parameter_param(registry, xml_parent, data):
     """yaml: git-parameter
-    This parameter allows to select a git tag, branch or revision number as
+    This parameter allows you to select a git tag, branch or revision number as
     parameter in Parametrized builds.
     Requires the Jenkins :jenkins-wiki:`Git Parameter Plugin
     <Git+Parameter+Plugin>`.

jenkins_jobs/modules/properties.py

@@ -796,7 +796,7 @@ def slack(registry, xml_parent, data):
     :arg bool include-custom-message: Include a custom message into the
         notification. (default false)
     :arg str custom-message: Custom message to be included. (default '')
-    :arg str room: A comma seperated list of rooms / channels to send
+    :arg str room: A comma separated list of rooms / channels to send
         the notifications to. (default '')
 
     Example:
@@ -915,7 +915,7 @@ def build_discarder(registry, xml_parent, data):
 
 def slave_prerequisites(registry, xml_parent, data):
     """yaml: slave-prerequisites
-    This plugin allows to check prerequisites on slave before
+    This plugin allows you to check prerequisites on slave before
     a job can run a build on it
 
     Requires the Jenkins :jenkins-wiki:`Slave Prerequisites Plugin
@@ -953,7 +953,7 @@ def slave_prerequisites(registry, xml_parent, data):
 
 def groovy_label(registry, xml_parent, data):
     """yaml: groovy-label
-    This plugin allows to use Groovy script to restrict where this project
+    This plugin allows you to use Groovy script to restrict where this project
     can be run.
 
     Requires the Jenkins :jenkins-wiki:`Groovy Label Assignment Plugin

jenkins_jobs/modules/publishers.py

@@ -121,7 +121,7 @@ def archive(registry, xml_parent, data):
     :arg bool only-if-success: archive artifacts only if build is successful
         (default false)
     :arg bool fingerprint: fingerprint all archived artifacts (default false)
-    :arg bool default-excludes: This option allows to enable or disable the
+    :arg bool default-excludes: This option allows you to enable or disable the
         default Ant exclusions. (default true)
     :arg bool case-sensitive: Treat include and exclude patterns as case
         sensitive. (default true)
@@ -148,8 +148,8 @@ def archive(registry, xml_parent, data):
 
 def blame_upstream(registry, xml_parent, data):
     """yaml: blame-upstream
-    Notify upstream commiters when build fails
+    Notify upstream committers when build fails
-    Requires the Jenkins :jenkins-wiki:`Blame upstream commiters Plugin
+    Requires the Jenkins :jenkins-wiki:`Blame upstream committers Plugin
     <Blame+Upstream+Committers+Plugin>`.
 
     Example:
@@ -6266,7 +6266,7 @@ def flowdock(registry, xml_parent, data):
 
     :arg str token: API token for the targeted flow.
       (required)
-    :arg str tags: Comma-separated list of tags to incude in message
+    :arg str tags: Comma-separated list of tags to include in message
       (default "")
     :arg bool chat-notification: Send chat notification when build fails
       (default true)
@@ -6330,9 +6330,9 @@ def clamav(registry, xml_parent, data):
     Check files with ClamAV, an open source antivirus engine.
     Requires the Jenkins :jenkins-wiki:`ClamAV Plugin <ClamAV+Plugin>`.
 
-    :arg str includes: Comma seperated list of files that should be scanned.
+    :arg str includes: Comma separated list of files that should be scanned.
         Must be set for ClamAV to check for artifacts. (default '')
-    :arg str excludes: Comma seperated list of files that should be ignored
+    :arg str excludes: Comma separated list of files that should be ignored
         (default '')
 
     Full Example:
@@ -6378,7 +6378,7 @@ def testselector(registry, xml_parent, data):
       (default "")
     :arg str show-fields: Shown in the tests tree
       (default "")
-    :arg str multiplicity-field: Amount of times the test should run
+    :arg str multiplicity-field: Number of times the test should run
       (default "")
 
     Example:
@@ -6616,7 +6616,7 @@ def slack(registry, xml_parent, data):
         (default '')
     :arg str build-server-url: Specify the URL for your server installation.
         (default '/')
-    :arg str room: A comma seperated list of rooms / channels to post the
+    :arg str room: A comma separated list of rooms / channels to post the
         notifications to. (default '')
     :arg bool notify-start: Send notification when the job starts (>=2.0).
         (default false)
@@ -7118,8 +7118,8 @@ def tasks(registry, xml_parent, data):
         should ensure that all new warnings will be finally fixed in subsequent
         builds. Depends on ``compute-new-warnings`` option. (default false)
     :arg bool only-use-stable-as-ref: Use the last stable build as the
-        reference to compute the number of new warnings against. This allows to
+        reference to compute the number of new warnings against. This allows
-        ignore interim unstable builds for which the number of warnings
+        you to ignore interim unstable builds for which the number of warnings
         decreased. Note that the last stable build is evaluated only by
         inspecting the unit test failures. The static analysis results are not
         considered. Depends on ``compute-new-warnings`` option. (default false)

jenkins_jobs/modules/triggers.py

@@ -1283,7 +1283,7 @@ def gitlab(registry, xml_parent, data):
                        **include-branches** and **exclude-branches** lists.
 
     RegexBasedFilter   Filter branches by regex
-                       The target branch regex allows to limit the
+                       The target branch regex allows you to limit the
                        execution of this job to certain branches. Any
                        branch matching the specified pattern in
                        **target-branch-regex** triggers the job. No

jenkins_jobs/modules/wrappers.py

@@ -1479,7 +1479,7 @@ def logstash(registry, xml_parent, data):
 
 def mongo_db(registry, xml_parent, data):
     """yaml: mongo-db build wrapper
-    Initalizes a MongoDB database while running the build.
+    Initializes a MongoDB database while running the build.
     Requires the Jenkins :jenkins-wiki:`MongoDB plugin <MongoDB+Plugin>`.
 
     :arg str name: The name of the MongoDB install to use (required)
@@ -1613,7 +1613,7 @@ def ssh_agent_credentials(registry, xml_parent, data):
 
 
     if both **users** and **user** parameters specified, **users** will be
-        prefered, **user** will be ignored.
+        preferred, **user** will be ignored.
 
     Example:
 
@@ -1876,12 +1876,12 @@ def xvfb(registry, xml_parent, data):
     Enable xvfb during the build.
     Requires the Jenkins :jenkins-wiki:`Xvfb Plugin <Xvfb+Plugin>`.
 
-    :arg str installation-name: The name of the Xvfb tool instalation (default
+    :arg str installation-name: The name of the Xvfb tool installation (default
         'default')
     :arg bool auto-display-name: Uses the -displayfd option of Xvfb by which it
         chooses it's own display name (default false)
     :arg str display-name: Ordinal of the display Xvfb will be running on, if
-        left empty choosen based on current build executor number (default '')
+        left empty chosen based on current build executor number (default '')
     :arg str assigned-labels: If you want to start Xvfb only on specific nodes
         specify its name or label (default '')
     :arg bool parallel-build: When running multiple Jenkins nodes on the same