Fix spelling mistakes in the documentation

Change-Id: If74b7b502459573eebf764bdc89f8a01b0d65cce

Documentation/access-control.txt

@@ -348,7 +348,7 @@ refs/meta/config
 
 This is where the Gerrit configuration of each project is residing.  This
 branch contains several files of importance: +project.config+, +groups+ and
-+rules.pl+.  Torgether they control access and behaviour during the change
++rules.pl+.  Torgether they control access and behavior during the change
 review process.
 
 

Documentation/cmd-show-queue.txt

@@ -18,7 +18,7 @@ is currently performing, or will perform in the near future.
 Gerrit contains an internal scheduler, similar to cron, that it
 uses to queue and dispatch both short and long term activity.
 
-Tasks that are completed or cancelled exit the queue very quickly
+Tasks that are completed or canceled exit the queue very quickly
 once they enter this state, but it can be possible to observe tasks
 in these states.
 

Documentation/cmd-stream-events.txt

@@ -14,7 +14,7 @@ DESCRIPTION
 -----------
 
 Provides a portal into the major events occurring on the server,
-outputing activity data in real-time to the client.  Events are
+outputting activity data in real-time to the client.  Events are
 filtered by the caller's access permissions, ensuring the caller
 only receives events for changes they can view on the web, or in
 the project repository.

Documentation/config-gerrit.txt

@@ -509,7 +509,7 @@ made to this table, this cache should be flushed.
 cache `"adv_bases"`::
 +
 Used only for push over smart HTTP when branch level access controls
-are enabled.  The cache entry contains all commits that are avaliable
+are enabled.  The cache entry contains all commits that are available
 for the client to use as potential delta bases.  Push over smart HTTP
 requires two HTTP requests, and this cache tries to carry state from
 the first request into the second to ensure it can complete.
@@ -683,7 +683,7 @@ cache.diff_intraline.enabled::
 Boolean to enable or disable the computation of intraline differences
 when populating a diff cache entry.  This flag is provided primarily
 as a backdoor to disable the intraline difference feature if
-necessary.  To maintain backwards compatability with prior versions,
+necessary.  To maintain backwards compatibility with prior versions,
 this setting will fallback to `cache.diff.intraline` if not set in the
 configuration.
 +
@@ -935,7 +935,7 @@ Default on JGit is 128 file descriptors on all platforms.
 Largest object size, in bytes, that JGit will allocate as a
 contiguous byte array.  Any file revision larger than this threshold
 will have to be streamed, typically requiring the use of temporary
-files under '$GIT_DIR/objects' to implement psuedo-random access
+files under '$GIT_DIR/objects' to implement pseudo-random access
 during delta decompression.
 +
 Servers with very high traffic should set this to be larger than
@@ -960,7 +960,7 @@ mapped segment is no longer in use before a call to `munmap()`
 can be made by the JVM native code.
 +
 In server applications (such as Gerrit) that need to access many
-pack files, setting this to true risks artifically running out
+pack files, setting this to true risks artificially running out
 of virtual address space, as the garbage collector cannot reclaim
 unused mapped spaces fast enough.
 +
@@ -1607,7 +1607,7 @@ By default, 2, which should be suitable for most high-traffic sites.
 +
 Minimum number of spare threads to keep in the worker thread pool.
 This number must be at least 1 larger than httpd.acceptorThreads
-multipled by the number of httpd.listenUrls configured.
+multiplied by the number of httpd.listenUrls configured.
 +
 By default, 5, suitable for most lower-volume traffic sites.
 
@@ -1962,7 +1962,7 @@ See Java documentation on how to create the krb5.ini file.
 Note the `renewTGT` property to make sure the TGT does not expire,
 and `useTicketCache` to use the TGT supplied by the operating system. As
 the whole point of using GSSAPI is to have passwordless authentication
-to the LDAP service, this option does not aquire a new TGT on its own.
+to the LDAP service, this option does not acquire a new TGT on its own.
 
 On Windows servers the registry key `HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa\Kerberos\Parameters`
 must have the DWORD value `allowtgtsessionkey` set to 1 and the account must not
@@ -2119,7 +2119,7 @@ main receive thread will also perform a change creation or patch
 set update.
 +
 Defaults to 1, using only the main receive thread. This feature is for
-databases with very high latency that can benfit from concurrent
+databases with very high latency that can benefit from concurrent
 operations when multiple changes are impacted at once.
 
 [[receive.timeout]]receive.timeout::
@@ -2130,7 +2130,7 @@ and updating references, not the time to index the pack. Values can
 be specified using standard time unit abbreviations ('ms', 'sec',
 'min', etc.).
 +
-Default is 2 minutes. If no unit is specified, millisconds
+Default is 2 minutes. If no unit is specified, milliseconds
 is assumed.
 
 
@@ -2185,7 +2185,7 @@ field of any generated email messages.  The supported values are:
 * `USER`
 +
 Gerrit will set the From header to use the current user's
-Full Name and Preferred Email.  This may cause messsages to be
+Full Name and Preferred Email.  This may cause messages to be
 classified as spam if the user's domain has SPF or DKIM enabled
 and <<sendemail.smtpServer,sendemail.smtpServer>> is not a trusted
 relay for that domain.
@@ -2410,7 +2410,7 @@ non-interactive users.
 +
 If the number of threads requested for non-interactive users is larger
 than the total number of threads allocated in sshd.threads, then the
-value of sshd.threads is increased to accomodate the requested value.
+value of sshd.threads is increased to accommodate the requested value.
 +
 By default, 0.
 

Documentation/dev-contributing.txt

@@ -127,7 +127,7 @@ Highlighted/additional styling notes:
     in the formatting guidelines.  This is especially true within the
     same file.
   * Review your change in Gerrit to see if it highlights
-    mistakingly deleted/added spaces on lines, trailing spaces.
+    mistakenly deleted/added spaces on lines, trailing spaces.
   * Line length should be 80 or less, unless the code reads
     better with something slightly longer.  Shorter lines not only
     help reviewers who may use a tablet to review the code, but future

Documentation/dev-design.txt

@@ -445,7 +445,7 @@ Latency
 -------
 
 Gerrit targets for sub-250 ms per page request, mostly by using
-very compact JSON payloads bewteen client and server.  However, as
+very compact JSON payloads between client and server.  However, as
 most of the serving stack (network, hardware, metadata
 database) is out of control of the Gerrit developers, no real
 guarantees can be made about latency.
@@ -474,7 +474,7 @@ parameters such as the following:
 Out of the box, Gerrit will handle the "Default Maximum". Site
 administrators may reconfigure their servers by editing gerrit.config
 to run closer to the estimated maximum if sufficient memory is made
-avaliable to the JVM and the relevant cache.*.memoryLimit variables
+available to the JVM and the relevant cache.*.memoryLimit variables
 are increased from their defaults.
 
 Discussion
@@ -671,7 +671,7 @@ Backups
 
 PostgreSQL and MySQL can be configured to replicate their data to
 other systems, where they are applied to a warm-standby backup in
-real time.  Gerrit instances which care about reduduncy will setup
+real time.  Gerrit instances which care about redundancy will setup
 this feature of PostgreSQL or MySQL to ensure the warm-standby is
 reasonably current should the master go offline.
 
@@ -699,7 +699,7 @@ occurred, and the Gerrit account identity of who did the upload.
 Changes submitted and merged into a branch also update the
 Git reflog.  These logs are available only to the Gerrit site
 administrator, and they are not replicated through the automatic
-replication noted earlier.  These logs are primarly recorded for an
+replication noted earlier.  These logs are primarily recorded for an
 "oh s**t" moment where the administrator has to rewind data.  In most
 installations they are a waste of disk space.  Future versions of
 JGit may allow disabling these logs, and Gerrit may take advantage

Documentation/dev-plugins.txt

@@ -193,7 +193,7 @@ credentials and possibly verify connectivity to validate them.
 ====
 
 MyInitStep needs to follow the standard Gerrit InitStep syntax
-and behaviour: writing to the console using the injected ConsoleUI
+and behavior: writing to the console using the injected ConsoleUI
 and accessing / changing configuration settings using Section.Factory.
 
 In addition to the standard Gerrit init injections, plugins receive

Documentation/install-j2ee.txt

@@ -21,7 +21,7 @@ Installation
   link:install.html#init[site initialization] tasks described
   in the standard installation documentation.
 
-* Stop the embedded deamon that was automatically started by 'init':
+* Stop the embedded daemon that was automatically started by 'init':
 +
 ----
   review_site/bin/gerrit.sh stop

Documentation/pgm-prolog-shell.txt

@@ -20,7 +20,7 @@ OPTIONS
 -s::
 	Dynamically load the Prolog source code at startup,
 	as though the user had entered `['FILE.pl'].` into
-	the interepter once it was running. This option may
+	the interpreter once it was running. This option may
 	be supplied more than once to load multiple files.
 
 EXAMPLES

Documentation/prolog-cookbook.txt

@@ -182,7 +182,7 @@ Here some examples of possible return values from the `submit_rule` predicate:
 <2> label `'Verified'` is rejected. Change is not submittable.
 <3> label `'Author-is-John-Doe'` is needed for the change to become submittable.
     Note that this tells nothing about how this criteria will be met. It is up
-    to the implementor of the `submit_rule` to return `label('Author-is-John-Doe',
+    to the implementer of the `submit_rule` to return `label('Author-is-John-Doe',
     ok(_))` when this criteria is met.  Most likely, it will have to match
     against `gerrit:commit_author` in order to check if this criteria is met.
     This will become clear through the examples below.
@@ -645,7 +645,7 @@ understand.
 
 Reusing the default submit policy
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-To get results of Gerrits default submit policy we use the
+To get results of Gerrit's default submit policy we use the
 `gerrit:default_submit` predicate.  The `gerrit:default_submit(X)` includes all
 categories from the database.  This means that if we write a submit rule like:
 
@@ -743,7 +743,7 @@ Let's implement the same submit rule the other way, without reusing the
 The latter implementation is probably easier to understand and the code looks
 cleaner. Note, however, that the latter implementation will always return the
 two standard categories only (`Code-Review` and `Verified`) even if a new
-category has beeen inserted into the database. To include the new category
+category has been inserted into the database. To include the new category
 the `rules.pl` would need to be modified or a `submit_filter` in a parent
 project would have to care about including the new category in the result
 of this `submit_rule`.

Documentation/user-dashboards.txt

@@ -44,7 +44,7 @@ characters, as some users may find one more readable than another:
 `&` or `;` or `,`
 
 The special `foreach=...` parameter is designed to facilitate
-more easily writting similar queries in a dashboard.  The value of the
+more easily writing similar queries in a dashboard.  The value of the
 foreach parameter will be used in every query in the dashboard by
 appending it to their ends with a space (ANDing it with the queries).
 

Documentation/user-search.txt

@@ -275,7 +275,7 @@ Argument Quoting
 ----------------
 
 Operator values that are not bare words (roughly A-Z, a-z, 0-9, @,
-hypen, dot and underscore) must be quoted for the query parser.
+hyphen, dot and underscore) must be quoted for the query parser.
 
 Quoting is accepted as either double quotes
 (e.g.  `message:"the value"`) or as matched
@@ -288,8 +288,8 @@ Boolean Operators
 Unless otherwise specified, operators are joined using the `AND`
 boolean operator, thereby restricting the search results.
 
-Parentheses can be used to force a particular precendence on complex
+Parentheses can be used to force a particular precedence on complex
-operator expressions, otherwise OR has higher precendence than AND.
+operator expressions, otherwise OR has higher precedence than AND.
 
 Negation
 ~~~~~~~~
@@ -308,7 +308,7 @@ results, returning only changes that match both operators.
 OR
 ~~
 The boolean operator `OR` (in all caps) can be used to find changes
-that match either operator.  This increases the nubmer of results
+that match either operator.  This increases the number of results
 that are returned, as more changes are considered.
 
 

Documentation/user-signedoffby.txt

@@ -104,10 +104,10 @@ has at least reviewed the patch and has indicated acceptance.  Hence patch
 mergers will sometimes manually convert an acker's "yep, looks good to me"
 into an Acked-by:.
 
-Acked-by: does not necessarily indicate acknowledgement of the entire patch.
+Acked-by: does not necessarily indicate acknowledgment of the entire patch.
 For example, if a patch affects multiple subsystems and has an Acked-by: from
-one subsystem maintainer then this usually indicates acknowledgement of just
+one subsystem maintainer then this usually indicates acknowledgment of just
-the part which affects that maintainer's code.  Judgement should be used here.
+the part which affects that maintainer's code.  Judgment should be used here.
 When in doubt people should refer to the original discussion in the mailing
 list archives.