= Gerrit Code Review - Plugin Development The Gerrit server functionality can be extended by installing plugins. This page describes how plugins for Gerrit can be developed. Depending on how tightly the extension code is coupled with the Gerrit server code, there is a distinction between `plugins` and `extensions`. [[plugin]] A `plugin` in Gerrit is tightly coupled code that runs in the same JVM as Gerrit. It has full access to all server internals. Plugins are tightly coupled to a specific major.minor server version and may require source code changes to compile against a different server version. [[extension]] An `extension` in Gerrit runs inside of the same JVM as Gerrit in the same way as a plugin, but has limited visibility to the server's internals. The limited visibility reduces the extension's dependencies, enabling it to be compatible across a wider range of server versions. Most of this documentation refers to either type as a plugin. [[getting-started]] == Getting started To get started with the development of a plugin there are two recommended ways: . use the Gerrit Plugin Maven archetype to create a new plugin project: + With the Gerrit Plugin Maven archetype you can create a skeleton for a plugin project. + ---- mvn archetype:generate -DarchetypeGroupId=com.google.gerrit \ -DarchetypeArtifactId=gerrit-plugin-archetype \ -DarchetypeVersion=2.12-SNAPSHOT \ -DgroupId=com.googlesource.gerrit.plugins.testplugin \ -DartifactId=testplugin ---- + Maven will ask for additional properties and then create the plugin in the current directory. To change the default property values answer 'n' when Maven asks to confirm the properties configuration. It will then ask again for all properties including those with predefined default values. . clone the sample plugin: + This is a project that demonstrates the various features of the plugin API. It can be taken as an example to develop an own plugin. + ---- $ git clone https://gerrit.googlesource.com/plugins/cookbook-plugin ---- + When starting from this example one should take care to adapt the `Gerrit-ApiVersion` in the `pom.xml` to the version of Gerrit for which the plugin is developed. If the plugin is developed for a released Gerrit version (no `SNAPSHOT` version) then the URL for the `gerrit-api-repository` in the `pom.xml` needs to be changed to `https://gerrit-api.storage.googleapis.com/release/`. [[API]] == API There are two different API formats offered against which plugins can be developed: gerrit-extension-api.jar:: A stable but thin interface. Suitable for extensions that need to be notified of events, but do not require tight coupling to the internals of Gerrit. Extensions built against this API can expect to be binary compatible across a wide range of server versions. gerrit-plugin-api.jar:: The complete internals of the Gerrit server, permitting a plugin to tightly couple itself and provide additional functionality that is not possible as an extension. Plugins built against this API are expected to break at the source code level between every major.minor Gerrit release. A plugin that compiles against 2.5 will probably need source code level changes to work with 2.6, 2.7, and so on. == Manifest Plugins may provide optional description information with standard manifest fields: ==== Implementation-Title: Example plugin showing examples Implementation-Version: 1.0 Implementation-Vendor: Example, Inc. Implementation-URL: http://example.com/opensource/plugin-foo/ ==== === ApiType Plugins using the tightly coupled `gerrit-plugin-api.jar` must declare this API dependency in the manifest to gain access to server internals. If no `Gerrit-ApiType` is specified the stable `extension` API will be assumed. This may cause ClassNotFoundExceptions when loading a plugin that needs the plugin API. ==== Gerrit-ApiType: plugin ==== === Explicit Registration Plugins that use explicit Guice registration must name the Guice modules in the manifest. Up to three modules can be named in the manifest. `Gerrit-Module` supplies bindings to the core server; `Gerrit-SshModule` supplies SSH commands to the SSH server (if enabled); `Gerrit-HttpModule` supplies servlets and filters to the HTTP server (if enabled). If no modules are named automatic registration will be performed by scanning all classes in the plugin JAR for `@Listen` and `@Export("")` annotations. ==== Gerrit-Module: tld.example.project.CoreModuleClassName Gerrit-SshModule: tld.example.project.SshModuleClassName Gerrit-HttpModule: tld.example.project.HttpModuleClassName ==== [[plugin_name]] === Plugin Name A plugin can optionally provide its own plugin name. ==== Gerrit-PluginName: replication ==== This is useful for plugins that contribute plugin-owned capabilities that are stored in the `project.config` file. Another use case is to be able to put project specific plugin configuration section in `project.config`. In this case it is advantageous to reserve the plugin name to access the configuration section in the `project.config` file. If `Gerrit-PluginName` is omitted, then the plugin's name is determined from the plugin file name. If a plugin provides its own name, then that plugin cannot be deployed multiple times under different file names on one Gerrit site. For Maven driven plugins, the following line must be included in the pom.xml file: [source,xml] ---- name ---- For Buck driven plugins, the following line must be included in the BUCK configuration file: [source,python] ---- manifest_entries = [ 'Gerrit-PluginName: name', ] ---- A plugin can get its own name injected at runtime: [source,java] ---- public class MyClass { private final String pluginName; @Inject public MyClass(@PluginName String pluginName) { this.pluginName = pluginName; } [...] } ---- A plugin can get its canonical web URL injected at runtime: [source,java] ---- public class MyClass { private final String url; @Inject public MyClass(@PluginCanonicalWebUrl String url) { this.url = url; } [...] } ---- The URL is composed of the server's canonical web URL and the plugin's name, i.e. `http://review.example.com:8080/plugin-name`. The canonical web URL may be injected into any .jar plugin regardless of whether or not the plugin provides an HTTP servlet. [[reload_method]] === Reload Method If a plugin holds an exclusive resource that must be released before loading the plugin again (for example listening on a network port or acquiring a file lock) the manifest must declare `Gerrit-ReloadMode` to be `restart`. Otherwise the preferred method of `reload` will be used, as it enables the server to hot-patch an updated plugin with no down time. ==== Gerrit-ReloadMode: restart ==== In either mode ('restart' or 'reload') any plugin or extension can be updated without restarting the Gerrit server. The difference is how Gerrit handles the upgrade: restart:: The old plugin is completely stopped. All registrations of SSH commands and HTTP servlets are removed. All registrations of any extension points are removed. All registered LifecycleListeners have their `stop()` method invoked in reverse order. The new plugin is started, and registrations are made from the new plugin. There is a brief window where neither the old nor the new plugin is connected to the server. This means SSH commands and HTTP servlets will return not found errors, and the plugin will not be notified of events that occurred during the restart. reload:: The new plugin is started. Its LifecycleListeners are permitted to perform their `start()` methods. All SSH and HTTP registrations are atomically swapped out from the old plugin to the new plugin, ensuring the server never returns a not found error. All extension point listeners are atomically swapped out from the old plugin to the new plugin, ensuring no events are missed (however some events may still route to the old plugin if the swap wasn't complete yet). The old plugin is stopped. To reload/restart a plugin the link:cmd-plugin-reload.html[plugin reload] command can be used. [[init_step]] === Init step Plugins can contribute their own "init step" during the Gerrit init wizard. This is useful for guiding the Gerrit administrator through the settings needed by the plugin to work properly. For instance plugins to integrate Jira issues to Gerrit changes may contribute their own "init step" to allow configuring the Jira URL, credentials and possibly verify connectivity to validate them. ==== Gerrit-InitStep: tld.example.project.MyInitStep ==== MyInitStep needs to follow the standard Gerrit InitStep syntax and behavior: writing to the console using the injected ConsoleUI and accessing / changing configuration settings using Section.Factory. In addition to the standard Gerrit init injections, plugins receive the @PluginName String injection containing their own plugin name. During their initialization plugins may get access to the `project.config` file of the `All-Projects` project and they are able to store configuration parameters in it. For this a plugin `InitStep` can get `com.google.gerrit.pgm.init.api.AllProjectsConfig` injected: [source,java] ---- public class MyInitStep implements InitStep { private final String pluginName; private final ConsoleUI ui; private final AllProjectsConfig allProjectsConfig; public MyInitStep(@PluginName String pluginName, ConsoleUI ui, AllProjectsConfig allProjectsConfig) { this.pluginName = pluginName; this.ui = ui; this.allProjectsConfig = allProjectsConfig; } @Override public void run() throws Exception { } @Override public void postRun() throws Exception { ui.message("\n"); ui.header(pluginName + " Integration"); boolean enabled = ui.yesno(true, "By default enabled for all projects"); Config cfg = allProjectsConfig.load().getConfig(); if (enabled) { cfg.setBoolean("plugin", pluginName, "enabled", enabled); } else { cfg.unset("plugin", pluginName, "enabled"); } allProjectsConfig.save(pluginName, "Initialize " + pluginName + " Integration"); } } ---- Bear in mind that the Plugin's InitStep class will be loaded but the standard Gerrit runtime environment is not available and the plugin's own Guice modules were not initialized. This means the InitStep for a plugin is not executed in the same way that the plugin executes within the server, and may mean a plugin author cannot trivially reuse runtime code during init. For instance a plugin that wants to verify connectivity may need to statically call the constructor of their connection class, passing in values obtained from the Section.Factory rather than from an injected Config object. Plugins' InitSteps are executed during the "Gerrit Plugin init" phase, after the extraction of the plugins embedded in the distribution .war file into `$GERRIT_SITE/plugins` and before the DB Schema initialization or upgrade. A plugin's InitStep cannot refer to Gerrit's DB Schema or any other Gerrit runtime objects injected at startup. [source,java] ---- public class MyInitStep implements InitStep { private final ConsoleUI ui; private final Section.Factory sections; private final String pluginName; @Inject public GitBlitInitStep(final ConsoleUI ui, Section.Factory sections, @PluginName String pluginName) { this.ui = ui; this.sections = sections; this.pluginName = pluginName; } @Override public void run() throws Exception { ui.header("\nMy plugin"); Section mySection = getSection("myplugin", null); mySection.string("Link name", "linkname", "MyLink"); } @Override public void postRun() throws Exception { } } ---- [[classpath]] == Classpath Each plugin is loaded into its own ClassLoader, isolating plugins from each other. A plugin or extension inherits the Java runtime and the Gerrit API chosen by `Gerrit-ApiType` (extension or plugin) from the hosting server. Plugins are loaded from a single JAR file. If a plugin needs additional libraries, it must include those dependencies within its own JAR. Plugins built using Maven may be able to use the link:http://maven.apache.org/plugins/maven-shade-plugin/[shade plugin] to package additional dependencies. Relocating (or renaming) classes should not be necessary due to the ClassLoader isolation. [[events]] == Listening to Events Certain operations in Gerrit trigger events. Plugins may receive notifications of these events by implementing the corresponding listeners. * `com.google.gerrit.common.EventListener`: + Allows to listen to events. These are the same link:cmd-stream-events.html#events[events] that are also streamed by the link:cmd-stream-events.html[gerrit stream-events] command. * `com.google.gerrit.extensions.events.LifecycleListener`: + Plugin start and stop * `com.google.gerrit.extensions.events.NewProjectCreatedListener`: + Project creation * `com.google.gerrit.extensions.events.ProjectDeletedListener`: + Project deletion * `com.google.gerrit.extensions.events.HeadUpdatedListener`: + Update of HEAD on a project * `com.google.gerrit.extensions.events.UsageDataPublishedListener`: + Publication of usage data * `com.google.gerrit.extensions.events.GarbageCollectorListener`: + Garbage collection ran on a project [[stream-events]] == Sending Events to the Events Stream Plugins may send events to the events stream where consumers of Gerrit's `stream-events` ssh command will receive them. To send an event, the plugin must invoke one of the `postEvent` methods in the `ChangeHookRunner` class, passing an instance of its own custom event class derived from `com.google.gerrit.server.events.Event`. Plugins which define new Events should register them via the `com.google.gerrit.server.events.EventTypes.registerClass()` method. This will make the EventType known to the system. Deserialzing events with the `com.google.gerrit.server.events.EventDeserializer` class requires that the event be registered in EventTypes. [[validation]] == Validation Listeners Certain operations in Gerrit can be validated by plugins by implementing the corresponding link:config-validation.html[listeners]. [[receive-pack]] == Receive Pack Initializers Plugins may provide ReceivePack initializers which will be invoked by Gerrit just before a ReceivePack instance will be used. Usually, plugins will make use of the setXXX methods on the ReceivePack to set additional properties on it. [[post-receive-hook]] == Post Receive-Pack Hooks Plugins may register PostReceiveHook instances in order to get notified when JGit successfully receives a pack. This may be useful for those plugins which would like to monitor changes in Git repositories. [[pre-upload-hook]] == Pre Upload-Pack Hooks Plugins may register PreUploadHook instances in order to get notified when JGit is about to upload a pack. This may be useful for those plugins which would like to monitor usage in Git repositories. [[ssh]] == SSH Commands Plugins may provide commands that can be accessed through the SSH interface (extensions do not have this option). Command implementations must extend the base class SshCommand: [source,java] ---- import com.google.gerrit.sshd.SshCommand; import com.google.gerrit.sshd.CommandMetaData; @CommandMetaData(name="print", description="Print hello command") class PrintHello extends SshCommand { @Override protected void run() { stdout.print("Hello\n"); } } ---- If no Guice modules are declared in the manifest, SSH commands may use auto-registration by providing an `@Export` annotation: [source,java] ---- import com.google.gerrit.extensions.annotations.Export; import com.google.gerrit.sshd.SshCommand; @Export("print") class PrintHello extends SshCommand { @Override protected void run() { stdout.print("Hello\n"); } } ---- If explicit registration is being used, a Guice module must be supplied to register the SSH command and declared in the manifest with the `Gerrit-SshModule` attribute: [source,java] ---- import com.google.gerrit.sshd.PluginCommandModule; class MyCommands extends PluginCommandModule { @Override protected void configureCommands() { command(PrintHello.class); } } ---- For a plugin installed as name `helloworld`, the command implemented by PrintHello class will be available to users as: ---- $ ssh -p 29418 review.example.com helloworld print ---- [[multiple-commands]] === Multiple Commands bound to one implementation Multiple SSH commands can be bound to the same implementation class. For example a Gerrit Shell plugin can bind different shell commands to the same implementation class: [source,java] ---- public class SshShellModule extends PluginCommandModule { @Override protected void configureCommands() { command("ls").to(ShellCommand.class); command("ps").to(ShellCommand.class); [...] } } ---- With the possible implementation: [source,java] ---- public class ShellCommand extends SshCommand { @Override protected void run() throws UnloggedFailure { String cmd = getName().substring(getPluginName().length() + 1); ProcessBuilder proc = new ProcessBuilder(cmd); Process cmd = proc.start(); [...] } } ---- And the call: ---- $ ssh -p 29418 review.example.com shell ls $ ssh -p 29418 review.example.com shell ps ---- [[root-level-commands]] === Root Level Commands Single command plugins are also supported. In this scenario plugin binds SSH command to its own name. `SshModule` must inherit from `SingleCommandPluginModule` class: [source,java] ---- public class SshModule extends SingleCommandPluginModule { @Override protected void configure(LinkedBindingBuilder b) { b.to(ShellCommand.class); } } ---- If the plugin above is deployed under sh.jar file in `$site/plugins` directory, generic commands can be called without specifying the actual SSH command. Note in the example below, that the called commands `ls` and `ps` was not explicitly bound: ---- $ ssh -p 29418 review.example.com sh ls $ ssh -p 29418 review.example.com sh ps ---- [[simple-configuration]] == Simple Configuration in `gerrit.config` In Gerrit, global configuration is stored in the `gerrit.config` file. If a plugin needs global configuration, this configuration should be stored in a `plugin` subsection in the `gerrit.config` file. This approach of storing the plugin configuration is only suitable for plugins that have a simple configuration that only consists of key-value pairs. With this approach it is not possible to have subsections in the plugin configuration. Plugins that require a complex configuration need to store their configuration in their link:#configuration[own configuration file] where they can make use of subsections. On the other hand storing the plugin configuration in a 'plugin' subsection in the `gerrit.config` file has the advantage that administrators have all configuration parameters in one file, instead of having one configuration file per plugin. To avoid conflicts with other plugins, it is recommended that plugins only use the `plugin` subsection with their own name. For example the `helloworld` plugin should store its configuration in the `plugin.helloworld` subsection: ---- [plugin "helloworld"] language = Latin ---- Via the `com.google.gerrit.server.config.PluginConfigFactory` class a plugin can easily access its configuration and there is no need for a plugin to parse the `gerrit.config` file on its own: [source,java] ---- @Inject private com.google.gerrit.server.config.PluginConfigFactory cfg; [...] String language = cfg.getFromGerritConfig("helloworld") .getString("language", "English"); ---- [[configuration]] == Configuration in own config file Plugins can store their configuration in an own configuration file. This makes sense if the plugin configuration is rather complex and requires the usage of subsections. Plugins that have a simple key-value pair configuration can store their configuration in a link:#simple-configuration[`plugin` subsection of the `gerrit.config` file]. The plugin configuration file must be named after the plugin and must be located in the `etc` folder of the review site. For example a configuration file for a `default-reviewer` plugin could look like this: .$site_path/etc/default-reviewer.config ---- [branch "refs/heads/master"] reviewer = Project Owners reviewer = john.doe@example.com [match "file:^.*\.txt"] reviewer = My Info Developers ---- Via the `com.google.gerrit.server.config.PluginConfigFactory` class a plugin can easily access its configuration: [source,java] ---- @Inject private com.google.gerrit.server.config.PluginConfigFactory cfg; [...] String[] reviewers = cfg.getGlobalPluginConfig("default-reviewer") .getStringList("branch", "refs/heads/master", "reviewer"); ---- [[simple-project-specific-configuration]] == Simple Project Specific Configuration in `project.config` In Gerrit, project specific configuration is stored in the project's `project.config` file on the `refs/meta/config` branch. If a plugin needs configuration on project level (e.g. to enable its functionality only for certain projects), this configuration should be stored in a `plugin` subsection in the project's `project.config` file. This approach of storing the plugin configuration is only suitable for plugins that have a simple configuration that only consists of key-value pairs. With this approach it is not possible to have subsections in the plugin configuration. Plugins that require a complex configuration need to store their configuration in their link:#project-specific-configuration[own configuration file] where they can make use of subsections. On the other hand storing the plugin configuration in a 'plugin' subsection in the `project.config` file has the advantage that project owners have all configuration parameters in one file, instead of having one configuration file per plugin. To avoid conflicts with other plugins, it is recommended that plugins only use the `plugin` subsection with their own name. For example the `helloworld` plugin should store its configuration in the `plugin.helloworld` subsection: ---- [plugin "helloworld"] enabled = true ---- Via the `com.google.gerrit.server.config.PluginConfigFactory` class a plugin can easily access its project specific configuration and there is no need for a plugin to parse the `project.config` file on its own: [source,java] ---- @Inject private com.google.gerrit.server.config.PluginConfigFactory cfg; [...] boolean enabled = cfg.getFromProjectConfig(project, "helloworld") .getBoolean("enabled", false); ---- It is also possible to get missing configuration parameters inherited from the parent projects: [source,java] ---- @Inject private com.google.gerrit.server.config.PluginConfigFactory cfg; [...] boolean enabled = cfg.getFromProjectConfigWithInheritance(project, "helloworld") .getBoolean("enabled", false); ---- Project owners can edit the project configuration by fetching the `refs/meta/config` branch, editing the `project.config` file and pushing the commit back. Plugin configuration values that are stored in the `project.config` file can be exposed in the ProjectInfoScreen to allow project owners to see and edit them from the UI. For this an instance of `ProjectConfigEntry` needs to be bound for each parameter. The export name must be a valid Git variable name. The variable name is case-insensitive, allows only alphanumeric characters and '-', and must start with an alphabetic character. The example below shows how the parameters `plugin.helloworld.enabled` and `plugin.helloworld.language` are bound to be editable from the Web UI. For the parameter `plugin.helloworld.enabled` "Enable Greeting" is provided as display name and the default value is set to `true`. For the parameter `plugin.helloworld.language` "Preferred Language" is provided as display name and "en" is set as default value. [source,java] ---- class Module extends AbstractModule { @Override protected void configure() { bind(ProjectConfigEntry.class) .annotatedWith(Exports.named("enabled")) .toInstance(new ProjectConfigEntry("Enable Greeting", true)); bind(ProjectConfigEntry.class) .annotatedWith(Exports.named("language")) .toInstance(new ProjectConfigEntry("Preferred Language", "en")); } } ---- By overwriting the `onUpdate` method of `ProjectConfigEntry` plugins can be notified when this configuration parameter is updated on a project. [[project-specific-configuration]] == Project Specific Configuration in own config file Plugins can store their project specific configuration in an own configuration file in the projects `refs/meta/config` branch. This makes sense if the plugins project specific configuration is rather complex and requires the usage of subsections. Plugins that have a simple key-value pair configuration can store their project specific configuration in a link:#simple-project-specific-configuration[ `plugin` subsection of the `project.config` file]. The plugin configuration file in the `refs/meta/config` branch must be named after the plugin. For example a configuration file for a `default-reviewer` plugin could look like this: .default-reviewer.config ---- [branch "refs/heads/master"] reviewer = Project Owners reviewer = john.doe@example.com [match "file:^.*\.txt"] reviewer = My Info Developers ---- Via the `com.google.gerrit.server.config.PluginConfigFactory` class a plugin can easily access its project specific configuration: [source,java] ---- @Inject private com.google.gerrit.server.config.PluginConfigFactory cfg; [...] String[] reviewers = cfg.getProjectPluginConfig(project, "default-reviewer") .getStringList("branch", "refs/heads/master", "reviewer"); ---- It is also possible to get missing configuration parameters inherited from the parent projects: [source,java] ---- @Inject private com.google.gerrit.server.config.PluginConfigFactory cfg; [...] String[] reviewers = cfg.getProjectPluginConfigWithInheritance(project, "default-reviewer") .getStringList("branch", "refs/heads/master", "reviewer"); ---- Project owners can edit the project configuration by fetching the `refs/meta/config` branch, editing the `.config` file and pushing the commit back. == React on changes in project configuration If a plugin wants to react on changes in the project configuration, it can implement a `GitReferenceUpdatedListener` and filter on events for the `refs/meta/config` branch: [source,java] ---- public class MyListener implements GitReferenceUpdatedListener { private final MetaDataUpdate.Server metaDataUpdateFactory; @Inject MyListener(MetaDataUpdate.Server metaDataUpdateFactory) { this.metaDataUpdateFactory = metaDataUpdateFactory; } @Override public void onGitReferenceUpdated(Event event) { if (event.getRefName().equals(RefNames.REFS_CONFIG)) { Project.NameKey p = new Project.NameKey(event.getProjectName()); try { ProjectConfig oldCfg = parseConfig(p, event.getOldObjectId()); ProjectConfig newCfg = parseConfig(p, event.getNewObjectId()); if (oldCfg != null && newCfg != null && !oldCfg.getProject().getSubmitType().equals(newCfg.getProject().getSubmitType())) { // submit type has changed ... } } catch (IOException | ConfigInvalidException e) { ... } } } private ProjectConfig parseConfig(Project.NameKey p, String idStr) throws IOException, ConfigInvalidException, RepositoryNotFoundException { ObjectId id = ObjectId.fromString(idStr); if (ObjectId.zeroId().equals(id)) { return null; } return ProjectConfig.read(metaDataUpdateFactory.create(p), id); } } ---- [[capabilities]] == Plugin Owned Capabilities Plugins may provide their own capabilities and restrict usage of SSH commands or `UiAction` to the users who are granted those capabilities. Plugins define the capabilities by overriding the `CapabilityDefinition` abstract class: [source,java] ---- public class PrintHelloCapability extends CapabilityDefinition { @Override public String getDescription() { return "Print Hello"; } } ---- If no Guice modules are declared in the manifest, capability may use auto-registration by providing an `@Export` annotation: [source,java] ---- @Export("printHello") public class PrintHelloCapability extends CapabilityDefinition { [...] } ---- Otherwise the capability must be bound in a plugin module: [source,java] ---- public class HelloWorldModule extends AbstractModule { @Override protected void configure() { bind(CapabilityDefinition.class) .annotatedWith(Exports.named("printHello")) .to(PrintHelloCapability.class); } } ---- With a plugin-owned capability defined in this way, it is possible to restrict usage of an SSH command or `UiAction` to members of the group that were granted this capability in the usual way, using the `RequiresCapability` annotation: [source,java] ---- @RequiresCapability("printHello") @CommandMetaData(name="print", description="Print greeting in different languages") public final class PrintHelloWorldCommand extends SshCommand { [...] } ---- Or with `UiAction`: [source,java] ---- @RequiresCapability("printHello") public class SayHelloAction extends UiAction implements RestModifyView { [...] } ---- Capability scope was introduced to differentiate between plugin-owned capabilities and core capabilities. Per default the scope of the `@RequiresCapability` annotation is `CapabilityScope.CONTEXT`, that means: * when `@RequiresCapability` is used within a plugin the scope of the capability is assumed to be that plugin. * If `@RequiresCapability` is used within the core Gerrit Code Review server (and thus is outside of a plugin) the scope is the core server and will use the `GlobalCapability` known to Gerrit Code Review server. If a plugin needs to use a core capability name (e.g. "administrateServer") this can be specified by setting `scope = CapabilityScope.CORE`: [source,java] ---- @RequiresCapability(value = "administrateServer", scope = CapabilityScope.CORE) [...] ---- [[ui_extension]] == UI Extension [[panels]] === Panels GWT plugins can contribute panels to Gerrit screens. Gerrit screens define extension points where plugins can add GWT panels with custom controls: * Change Screen: ** `GerritUiExtensionPoint.CHANGE_SCREEN_HEADER`: + Panel will be shown in the header bar to the right of the change status. ** `GerritUiExtensionPoint.CHANGE_SCREEN_HEADER_RIGHT_OF_BUTTONS`: + Panel will be shown in the header bar on the right side of the buttons. ** `GerritUiExtensionPoint.CHANGE_SCREEN_HEADER_RIGHT_OF_POP_DOWNS`: + Panel will be shown in the header bar on the right side of the pop down buttons. ** `GerritUiExtensionPoint.CHANGE_SCREEN_BELOW_CHANGE_INFO_BLOCK`: + Panel will be shown below the change info block. ** The following parameters are provided: *** `GerritUiExtensionPoint.Key.CHANGE_INFO`: + The link:rest-api-changes.html#change-info[ChangeInfo] entity for the current change. * Project Info Screen: ** `GerritUiExtensionPoint.PROJECT_INFO_SCREEN_TOP`: + Panel will be shown at the top of the screen. ** `GerritUiExtensionPoint.PROJECT_INFO_SCREEN_BOTTOM`: + Panel will be shown at the bottom of the screen. ** The following parameters are provided: *** `GerritUiExtensionPoint.Key.PROJECT_NAME`: + The name of the project. * User Password Screen: ** `GerritUiExtensionPoint.PASSWORD_SCREEN_BOTTOM`: + Panel will be shown at the bottom of the screen. ** The following parameters are provided: *** `GerritUiExtensionPoint.Key.ACCOUNT_INFO`: + The link:rest-api-accounts.html#account-info[AccountInfo] entity for the current user. * User Preferences Screen: ** `GerritUiExtensionPoint.PREFERENCES_SCREEN_BOTTOM`: + Panel will be shown at the bottom of the screen. ** The following parameters are provided: *** `GerritUiExtensionPoint.Key.ACCOUNT_INFO`: + The link:rest-api-accounts.html#account-info[AccountInfo] entity for the current user. * User Profile Screen: ** `GerritUiExtensionPoint.PROFILE_SCREEN_BOTTOM`: + Panel will be shown at the bottom of the screen below the grid with the profile data. ** The following parameters are provided: *** `GerritUiExtensionPoint.Key.ACCOUNT_INFO`: + The link:rest-api-accounts.html#account-info[AccountInfo] entity for the current user. Example panel: [source,java] ---- public class MyPlugin extends PluginEntryPoint { @Override public void onPluginLoad() { Plugin.get().panel(GerritUiExtensionPoint.CHANGE_SCREEN_BELOW_CHANGE_INFO_BLOCK, new Panel.EntryPoint() { @Override public void onLoad(Panel panel) { panel.setWidget(new InlineLabel("My Panel for change " + panel.getInt(GerritUiExtensionPoint.Key.CHANGE_ID, -1)); } }); } } ---- [[actions]] === Actions Plugins can contribute UI actions on core Gerrit pages. This is useful for workflow customization or exposing plugin functionality through the UI in addition to SSH commands and the REST API. For instance a plugin to integrate Jira with Gerrit changes may contribute a "File bug" button to allow filing a bug from the change page or plugins to integrate continuous integration systems may contribute a "Schedule" button to allow a CI build to be scheduled manually from the patch set panel. Two different places on core Gerrit pages are supported: * Change screen * Project info screen Plugins contribute UI actions by implementing the `UiAction` interface: [source,java] ---- @RequiresCapability("printHello") class HelloWorldAction implements UiAction, RestModifyView { static class Input { boolean french; String message; } private Provider user; @Inject HelloWorldAction(Provider user) { this.user = user; } @Override public String apply(RevisionResource rev, Input input) { final String greeting = input.french ? "Bonjour" : "Hello"; return String.format("%s %s from change %s, patch set %d!", greeting, Strings.isNullOrEmpty(input.message) ? Objects.firstNonNull(user.get().getUserName(), "world") : input.message, rev.getChange().getId().toString(), rev.getPatchSet().getPatchSetId()); } @Override public Description getDescription( RevisionResource resource) { return new Description() .setLabel("Say hello") .setTitle("Say hello in different languages"); } } ---- Sometimes plugins may want to be able to change the state of a patch set or change in the `UiAction.apply()` method and reflect these changes on the core UI. For example a buildbot plugin which exposes a 'Schedule' button on the patch set panel may want to disable that button after the build was scheduled and update the tooltip of that button. But because of Gerrit's caching strategy the following must be taken into consideration. The browser is allowed to cache the `UiAction` information until something on the change is modified. More accurately the change row needs to be modified in the database to have a more recent `lastUpdatedOn` or a new `rowVersion`, or the +refs/meta/config+ of the project or any parents needs to change to a new SHA-1. The ETag SHA-1 computation code can be found in the `ChangeResource.getETag()` method. The easiest way to accomplish this is to update `lastUpdatedOn` of the change: [source,java] ---- @Override public Object apply(RevisionResource rcrs, Input in) { // schedule a build [...] // update change ReviewDb db = dbProvider.get(); db.changes().beginTransaction(change.getId()); try { change = db.changes().atomicUpdate( change.getId(), new AtomicUpdate() { @Override public Change update(Change change) { ChangeUtil.updated(change); return change; } }); db.commit(); } finally { db.rollback(); } [...] } ---- `UiAction` must be bound in a plugin module: [source,java] ---- public class Module extends AbstractModule { @Override protected void configure() { install(new RestApiModule() { @Override protected void configure() { post(REVISION_KIND, "say-hello") .to(HelloWorldAction.class); } }); } } ---- The module above must be declared in the `pom.xml` for Maven driven plugins: [source,xml] ---- com.googlesource.gerrit.plugins.cookbook.Module ---- or in the `BUCK` configuration file for Buck driven plugins: [source,python] ---- manifest_entries = [ 'Gerrit-Module: com.googlesource.gerrit.plugins.cookbook.Module', ] ---- In some use cases more user input must be gathered, for that `UiAction` can be combined with the JavaScript API. This would display a small popup near the activation button to gather additional input from the user. The JS file is typically put in the `static` folder within the plugin's directory: [source,javascript] ---- Gerrit.install(function(self) { function onSayHello(c) { var f = c.textfield(); var t = c.checkbox(); var b = c.button('Say hello', {onclick: function(){ c.call( {message: f.value, french: t.checked}, function(r) { c.hide(); window.alert(r); c.refresh(); }); }}); c.popup(c.div( c.prependLabel('Greeting message', f), c.br(), c.label(t, 'french'), c.br(), b)); f.focus(); } self.onAction('revision', 'say-hello', onSayHello); }); ---- The JS module must be exposed as a `WebUiPlugin` and bound as an HTTP Module: [source,java] ---- public class HttpModule extends HttpPluginModule { @Override protected void configureServlets() { DynamicSet.bind(binder(), WebUiPlugin.class) .toInstance(new JavaScriptPlugin("hello.js")); } } ---- The HTTP module above must be declared in the `pom.xml` for Maven driven plugins: [source,xml] ---- com.googlesource.gerrit.plugins.cookbook.HttpModule ---- or in the `BUCK` configuration file for Buck driven plugins [source,python] ---- manifest_entries = [ 'Gerrit-HttpModule: com.googlesource.gerrit.plugins.cookbook.HttpModule', ] ---- If `UiAction` is annotated with the `@RequiresCapability` annotation, then the capability check is done during the `UiAction` gathering, so the plugin author doesn't have to set `UiAction.Description.setVisible()` explicitly in this case. The following prerequisities must be met, to satisfy the capability check: * user is authenticated * user is a member of a group which has the `Administrate Server` capability, or * user is a member of a group which has the required capability The `apply` method is called when the button is clicked. If `UiAction` is combined with JavaScript API (its own JavaScript function is provided), then a popup dialog is normally opened to gather additional user input. A new button is placed on the popup dialog to actually send the request. Every `UiAction` exposes a REST API endpoint. The endpoint from the example above can be accessed from any REST client, i. e.: ==== curl -X POST -H "Content-Type: application/json" \ -d '{message: "François", french: true}' \ --digest --user joe:secret \ http://host:port/a/changes/1/revisions/1/cookbook~say-hello "Bonjour François from change 1, patch set 1!" ==== A special case is to bind an endpoint without a view name. This is particularly useful for `DELETE` requests: [source,java] ---- public class Module extends AbstractModule { @Override protected void configure() { install(new RestApiModule() { @Override protected void configure() { delete(PROJECT_KIND) .to(DeleteProject.class); } }); } } ---- For a `UiAction` bound this way, a JS API function can be provided. Currently only one restriction exists: per plugin only one `UiAction` can be bound per resource without view name. To define a JS function for the `UiAction`, "/" must be used as the name: [source,javascript] ---- Gerrit.install(function(self) { function onDeleteProject(c) { [...] } self.onAction('project', '/', onDeleteProject); }); ---- [[top-menu-extensions]] == Top Menu Extensions Plugins can contribute items to Gerrit's top menu. A single top menu extension can have multiple elements and will be put as the last element in Gerrit's top menu. Plugins define the top menu entries by implementing `TopMenu` interface: [source,java] ---- public class MyTopMenuExtension implements TopMenu { @Override public List getEntries() { return Lists.newArrayList( new MenuEntry("Top Menu Entry", Lists.newArrayList( new MenuItem("Gerrit", "http://gerrit.googlecode.com/")))); } } ---- Plugins can also add additional menu items to Gerrit's top menu entries by defining a `MenuEntry` that has the same name as a Gerrit top menu entry: [source,java] ---- public class MyTopMenuExtension implements TopMenu { @Override public List getEntries() { return Lists.newArrayList( new MenuEntry(GerritTopMenu.PROJECTS, Lists.newArrayList( new MenuItem("Browse Repositories", "https://gerrit.googlesource.com/")))); } } ---- `MenuItems` that are bound for the `MenuEntry` with the name `GerritTopMenu.PROJECTS` can contain a `${projectName}` placeholder which is automatically replaced by the actual project name. E.g. plugins may register an link:#http[HTTP Servlet] to handle project specific requests and add an menu item for this: [source,java] --- new MenuItem("My Screen", "/plugins/myplugin/project/${projectName}"); --- This also enables plugins to provide menu items for project aware screens: [source,java] --- new MenuItem("My Screen", "/x/my-screen/for/${projectName}"); --- If no Guice modules are declared in the manifest, the top menu extension may use auto-registration by providing an `@Listen` annotation: [source,java] ---- @Listen public class MyTopMenuExtension implements TopMenu { [...] } ---- Otherwise the top menu extension must be bound in the plugin module used for the Gerrit system injector (Gerrit-Module entry in MANIFEST.MF): [source,java] ---- package com.googlesource.gerrit.plugins.helloworld; public class HelloWorldModule extends AbstractModule { @Override protected void configure() { DynamicSet.bind(binder(), TopMenu.class).to(MyTopMenuExtension.class); } } ---- [source,manifest] ---- Gerrit-ApiType: plugin Gerrit-Module: com.googlesource.gerrit.plugins.helloworld.HelloWorldModule ---- It is also possible to show some menu entries only if the user has a certain capability: [source,java] ---- public class MyTopMenuExtension implements TopMenu { private final String pluginName; private final Provider userProvider; private final List menuEntries; @Inject public MyTopMenuExtension(@PluginName String pluginName, Provider userProvider) { this.pluginName = pluginName; this.userProvider = userProvider; menuEntries = new ArrayList(); // add menu entry that is only visible to users with a certain capability if (canSeeMenuEntry()) { menuEntries.add(new MenuEntry("Top Menu Entry", Collections .singletonList(new MenuItem("Gerrit", "http://gerrit.googlecode.com/")))); } // add menu entry that is visible to all users (even anonymous users) menuEntries.add(new MenuEntry("Top Menu Entry", Collections .singletonList(new MenuItem("Documentation", "/plugins/myplugin/")))); } private boolean canSeeMenuEntry() { if (userProvider.get().isIdentifiedUser()) { CapabilityControl ctl = userProvider.get().getCapabilities(); return ctl.canPerform(pluginName + "-" + MyCapability.ID) || ctl.canAdministrateServer(); } else { return false; } } @Override public List getEntries() { return menuEntries; } } ---- [[gwt_ui_extension]] == GWT UI Extension Plugins can extend the Gerrit UI with own GWT code. The Maven archetype 'gerrit-plugin-gwt-archetype' can be used to generate a GWT plugin skeleton. How to use the Maven plugin archetypes is described in the link:#getting-started[Getting started] section. The generated GWT plugin has a link:#top-menu-extensions[top menu] that opens a GWT dialog box when the user clicks on it. In addition to the Gerrit-Plugin API a GWT plugin depends on `gerrit-plugin-gwtui`. This dependency must be specified in the `pom.xml`: [source,xml] ---- com.google.gerrit gerrit-plugin-gwtui ${Gerrit-ApiVersion} ---- A GWT plugin must contain a GWT module file, e.g. `HelloPlugin.gwt.xml`, that bundles together all the configuration settings of the GWT plugin: [source,xml] ---- ---- The GWT module must inherit `com.google.gerrit.Plugin` and `com.google.gwt.http.HTTP`. To register the GWT module a `GwtPlugin` needs to be bound. If no Guice modules are declared in the manifest, the GWT plugin may use auto-registration by using the `@Listen` annotation: [source,java] ---- @Listen public class MyExtension extends GwtPlugin { public MyExtension() { super("hello_gwt_plugin"); } } ---- Otherwise the binding must be done in an `HttpModule`: [source,java] ---- public class HttpModule extends HttpPluginModule { @Override protected void configureServlets() { DynamicSet.bind(binder(), WebUiPlugin.class) .toInstance(new GwtPlugin("hello_gwt_plugin")); } } ---- The HTTP module above must be declared in the `pom.xml` for Maven driven plugins: [source,xml] ---- com.googlesource.gerrit.plugins.myplugin.HttpModule ---- The name that is provided to the `GwtPlugin` must match the GWT module name compiled into the plugin. The name of the GWT module can be explicitly set in the GWT module XML file by specifying the `rename-to` attribute on the module. It is important that the module name be unique across all plugins installed on the server, as the module name determines the JavaScript namespace used by the compiled plugin code. [source,xml] ---- ---- The actual GWT code must be implemented in a class that extends `com.google.gerrit.plugin.client.PluginEntryPoint`: [source,java] ---- public class HelloPlugin extends PluginEntryPoint { @Override public void onPluginLoad() { // Create the dialog box final DialogBox dialogBox = new DialogBox(); // The content of the dialog comes from a User specified Preference dialogBox.setText("Hello from GWT Gerrit UI plugin"); dialogBox.setAnimationEnabled(true); Button closeButton = new Button("Close"); VerticalPanel dialogVPanel = new VerticalPanel(); dialogVPanel.setWidth("100%"); dialogVPanel.setHorizontalAlignment(VerticalPanel.ALIGN_CENTER); dialogVPanel.add(closeButton); closeButton.addClickHandler(new ClickHandler() { public void onClick(ClickEvent event) { dialogBox.hide(); } }); // Set the contents of the Widget dialogBox.setWidget(dialogVPanel); RootPanel rootPanel = RootPanel.get(HelloMenu.MENU_ID); rootPanel.getElement().removeAttribute("href"); rootPanel.addDomHandler(new ClickHandler() { @Override public void onClick(ClickEvent event) { dialogBox.center(); dialogBox.show(); } }, ClickEvent.getType()); } } ---- This class must be set as entry point in the GWT module: [source,xml] ---- ---- In addition this class must be defined as module in the `pom.xml` for the `gwt-maven-plugin` and the `webappDirectory` option of `gwt-maven-plugin` must be set to `${project.build.directory}/classes/static`: [source,xml] ---- org.codehaus.mojo gwt-maven-plugin 2.7.0 com.googlesource.gerrit.plugins.myplugin.HelloPlugin true true ${project.build.directory}/classes/static compile ---- To attach a GWT widget defined by the plugin to the Gerrit core UI `com.google.gwt.user.client.ui.RootPanel` can be used to manipulate the Gerrit core widgets: [source,java] ---- RootPanel rootPanel = RootPanel.get(HelloMenu.MENU_ID); rootPanel.getElement().removeAttribute("href"); rootPanel.addDomHandler(new ClickHandler() { @Override public void onClick(ClickEvent event) { dialogBox.center(); dialogBox.show(); } }, ClickEvent.getType()); ---- GWT plugins can come with their own css file. This css file must have a unique name and must be registered in the GWT module: [source,xml] ---- ---- If a GWT plugin wants to invoke the Gerrit REST API it can use `com.google.gerrit.plugin.client.rpc.RestApi` to construct the URL path and to trigger the REST calls. Example for invoking a Gerrit core REST endpoint: [source,java] ---- new RestApi("projects").id(projectName).view("description") .put("new description", new AsyncCallback() { @Override public void onSuccess(JavaScriptObject result) { // TODO } @Override public void onFailure(Throwable caught) { // never invoked } }); ---- Example for invoking a REST endpoint defined by a plugin: [source,java] ---- new RestApi("projects").id(projectName).view("myplugin", "myview") .get(new AsyncCallback() { @Override public void onSuccess(JavaScriptObject result) { // TODO } @Override public void onFailure(Throwable caught) { // never invoked } }); ---- The `onFailure(Throwable)` of the provided callback is never invoked. If an error occurs, it is shown in an error dialog. In order to be able to do REST calls the GWT module must inherit `com.google.gwt.json.JSON`: [source,xml] ---- ---- [[screen]] == Add Screen A link:#gwt_ui_extension[GWT plugin] can link:#top-menu-extensions[add a menu item] that opens a screen that is implemented by the plugin. This way plugin screens can be fully integrated into the Gerrit UI. Example menu item: [source,java] ---- public class MyMenu implements TopMenu { private final List menuEntries; @Inject public MyMenu(@PluginName String name) { menuEntries = Lists.newArrayList(); menuEntries.add(new MenuEntry("My Menu", Collections.singletonList( new MenuItem("My Screen", "#/x/" + name + "/my-screen", "")))); } @Override public List getEntries() { return menuEntries; } } ---- Example screen: [source,java] ---- public class MyPlugin extends PluginEntryPoint { @Override public void onPluginLoad() { Plugin.get().screen("my-screen", new Screen.EntryPoint() { @Override public void onLoad(Screen screen) { screen.add(new InlineLabel("My Screen"); screen.show(); } }); } } ---- [[user-settings-screen]] == Add User Settings Screen A link:#gwt_ui_extension[GWT plugin] can implement a user settings screen that is integrated into the Gerrit user settings menu. Example settings screen: [source,java] ---- public class MyPlugin extends PluginEntryPoint { @Override public void onPluginLoad() { Plugin.get().settingsScreen("my-preferences", "My Preferences", new Screen.EntryPoint() { @Override public void onLoad(Screen screen) { screen.setPageTitle("Settings"); screen.add(new InlineLabel("My Preferences")); screen.show(); } }); } } ---- By defining an link:config-gerrit.html#urlAlias[urlAlias] Gerrit administrators can map plugin screens into the Gerrit URL namespace or even replace Gerrit screens by plugin screens. Plugins may also programatically add URL aliases in the preferences of of a user. This way certain screens can be replaced for certain users. E.g. the plugin may offer a user preferences setting for choosing a screen that then sets/unsets a URL alias for the user. [[settings-screen]] == Plugin Settings Screen If a plugin implements a screen for administrating its settings that is available under "#/x//settings" it is automatically linked from the plugin list screen. [[http]] == HTTP Servlets Plugins or extensions may register additional HTTP servlets, and wrap them with HTTP filters. Servlets may use auto-registration to declare the URL they handle: [source,java] ---- import com.google.gerrit.extensions.annotations.Export; import com.google.inject.Singleton; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; @Export("/print") @Singleton class HelloServlet extends HttpServlet { protected void doGet(HttpServletRequest req, HttpServletResponse res) throws IOException { res.setContentType("text/plain"); res.setCharacterEncoding("UTF-8"); res.getWriter().write("Hello"); } } ---- The auto registration only works for standard servlet mappings like `/foo` or `+/foo/*+`. Regex style bindings must use a Guice ServletModule to register the HTTP servlets and declare it explicitly in the manifest with the `Gerrit-HttpModule` attribute: [source,java] ---- import com.google.inject.servlet.ServletModule; class MyWebUrls extends ServletModule { protected void configureServlets() { serve("/print").with(HelloServlet.class); } } ---- For a plugin installed as name `helloworld`, the servlet implemented by HelloServlet class will be available to users as: ---- $ curl http://review.example.com/plugins/helloworld/print ---- [[data-directory]] == Data Directory Plugins can request a data directory with a `@PluginData` Path (or File, deprecated) dependency. A data directory will be created automatically by the server in `$site_path/data/$plugin_name` and passed to the plugin. Plugins can use this to store any data they want. [source,java] ---- @Inject MyType(@PluginData java.nio.file.Path myDir) { this.in = Files.newInputStream(myDir.resolve("my.config")); } ---- [[secure-store]] == SecureStore SecureStore allows to change the way Gerrit stores sensitive data like passwords. In order to replace the default SecureStore (no-op) implementation, a class that extends `com.google.gerrit.server.securestore.SecureStore` needs to be provided (with dependencies) in a separate jar file. Then link:pgm-SwitchSecureStore.html[SwitchSecureStore] must be run to switch implementations. The SecureStore implementation is instantiated using a Guice injector which binds the `File` annotated with the `@SitePath` annotation. This means that a SecureStore implementation class can get access to the `site_path` like in the following example: [source,java] ---- @Inject MySecureStore(@SitePath java.io.File sitePath) { // your code } ---- No Guice bindings or modules are required. Gerrit will automatically discover and bind the implementation. [[download-commands]] == Download Commands Gerrit offers commands for downloading changes and cloning projects using different download schemes (e.g. for downloading via different network protocols). Plugins can contribute download schemes, download commands and clone commands by implementing `com.google.gerrit.extensions.config.DownloadScheme`, `com.google.gerrit.extensions.config.DownloadCommand` and `com.google.gerrit.extensions.config.CloneCommand`. The download schemes, download commands and clone commands which are used most often are provided by the Gerrit core plugin `download-commands`. [[included-in]] == Included In For merged changes the link:user-review-ui.html#included-in[Included In] drop-down panel shows the branches and tags in which the change is included. Plugins can add additional systems in which the change can be included by implementing `com.google.gerrit.extensions.config.ExternalIncludedIn`, e.g. a plugin can provide a list of servers on which the change was deployed. [[links-to-external-tools]] == Links To External Tools Gerrit has extension points that enables development of a light-weight plugin that links commits to external tools (GitBlit, CGit, company specific resources etc). PatchSetWebLinks will appear to the right of the commit-SHA1 in the UI. [source, java] ---- import com.google.gerrit.extensions.annotations.Listen; import com.google.gerrit.extensions.webui.PatchSetWebLink;; import com.google.gerrit.extensions.webui.WebLinkTarget; @Listen public class MyWeblinkPlugin implements PatchSetWebLink { private String name = "MyLink"; private String placeHolderUrlProjectCommit = "http://my.tool.com/project=%s/commit=%s"; private String imageUrl = "http://placehold.it/16x16.gif"; @Override public WebLinkInfo getPatchSetWebLink(String projectName, String commit) { return new WebLinkInfo(name, imageUrl, String.format(placeHolderUrlProjectCommit, project, commit), WebLinkTarget.BLANK); } } ---- FileWebLinks will appear in the side-by-side diff screen on the right side of the patch selection on each side. DiffWebLinks will appear in the side-by-side and unified diff screen in the header next to the navigation icons. ProjectWebLinks will appear in the project list in the `Repository Browser` column. BranchWebLinks will appear in the branch list in the last column. [[documentation]] == Documentation If a plugin does not register a filter or servlet to handle URLs `+/Documentation/*+` or `+/static/*+`, the core Gerrit server will automatically export these resources over HTTP from the plugin JAR. Static resources under the `static/` directory in the JAR will be available as `/plugins/helloworld/static/resource`. This prefix is configurable by setting the `Gerrit-HttpStaticPrefix` attribute. Documentation files under the `Documentation/` directory in the JAR will be available as `/plugins/helloworld/Documentation/resource`. This prefix is configurable by setting the `Gerrit-HttpDocumentationPrefix` attribute. Documentation may be written in the Markdown flavor link:https://github.com/sirthias/pegdown[pegdown] if the file name ends with `.md`. Gerrit will automatically convert Markdown to HTML if accessed with extension `.html`. [[macros]] Within the Markdown documentation files macros can be used that allow to write documentation with reasonably accurate examples that adjust automatically based on the installation. The following macros are supported: [width="40%",options="header"] |=================================================== |Macro | Replacement |@PLUGIN@ | name of the plugin |@URL@ | Gerrit Web URL |@SSH_HOST@ | SSH Host |@SSH_PORT@ | SSH Port |=================================================== The macros will be replaced when the documentation files are rendered from Markdown to HTML. Macros that start with `\` such as `\@KEEP@` will render as `@KEEP@` even if there is an expansion for `KEEP` in the future. [[auto-index]] === Automatic Index If a plugin does not handle its `/` URL itself, Gerrit will redirect clients to the plugin's `/Documentation/index.html`. Requests for `/Documentation/` (bare directory) will also redirect to `/Documentation/index.html`. If neither resource `Documentation/index.html` or `Documentation/index.md` exists in the plugin JAR, Gerrit will automatically generate an index page for the plugin's documentation tree by scanning every `*.md` and `*.html` file in the Documentation/ directory. For any discovered Markdown (`*.md`) file, Gerrit will parse the header of the file and extract the first level one title. This title text will be used as display text for a link to the HTML version of the page. For any discovered HTML (`*.html`) file, Gerrit will use the name of the file, minus the `*.html` extension, as the link text. Any hyphens in the file name will be replaced with spaces. If a discovered file is named `about.md` or `about.html`, its content will be inserted in an 'About' section at the top of the auto-generated index page. If both `about.md` and `about.html` exist, only the first discovered file will be used. If a discovered file name beings with `cmd-` it will be clustered into a 'Commands' section of the generated index page. If a discovered file name beings with `servlet-` it will be clustered into a 'Servlets' section of the generated index page. If a discovered file name beings with `rest-api-` it will be clustered into a 'REST APIs' section of the generated index page. All other files are clustered under a 'Documentation' section. Some optional information from the manifest is extracted and displayed as part of the index page, if present in the manifest: [width="40%",options="header"] |=================================================== |Field | Source Attribute |Name | Implementation-Title |Vendor | Implementation-Vendor |Version | Implementation-Version |URL | Implementation-URL |API Version | Gerrit-ApiVersion |=================================================== [[deployment]] == Deployment Compiled plugins and extensions can be deployed to a running Gerrit server using the link:cmd-plugin-install.html[plugin install] command. Web UI plugins distributed as single `.js` file can be deployed without the overhead of JAR packaging, for more information refer to link:cmd-plugin-install.html[plugin install] command. Plugins can also be copied directly into the server's directory at `$site_path/plugins/$name.(jar|js)`. The name of the JAR file, minus the `.jar` or `.js` extension, will be used as the plugin name. Unless disabled, servers periodically scan this directory for updated plugins. The time can be adjusted by link:config-gerrit.html#plugins.checkFrequency[plugins.checkFrequency]. For disabling plugins the link:cmd-plugin-remove.html[plugin remove] command can be used. Disabled plugins can be re-enabled using the link:cmd-plugin-enable.html[plugin enable] command. == Known issues and bugs === Error handling in UI when using the REST API When a plugin invokes a REST endpoint in the UI, it provides an `AsyncCallback` to handle the result. At the moment the `onFailure(Throwable)` of the callback is never invoked, even if there is an error. Errors are always handled by the Gerrit core UI which shows the error dialog. This means currently plugins cannot do any error handling and e.g. ignore expected errors. In the following example the REST endpoint would return '404 Not Found' if there is no HTTP password and the Gerrit core UI would display an error dialog for this. However having no HTTP password is not an error and the plugin may like to handle this case. [source,java] ---- new RestApi("accounts").id("self").view("password.http") .get(new AsyncCallback() { @Override public void onSuccess(NativeString httpPassword) { // TODO } @Override public void onFailure(Throwable caught) { // never invoked } }); ---- == SEE ALSO * link:js-api.html[JavaScript API] * link:dev-rest-api.html[REST API Developers' Notes] GERRIT ------ Part of link:index.html[Gerrit Code Review] SEARCHBOX ---------