= Gerrit Code Review - Configuration == File `etc/gerrit.config` The optional file `'$site_path'/etc/gerrit.config` is a Git-style config file that controls many host specific settings for Gerrit. [NOTE] The contents of the `etc/gerrit.config` file are cached at startup by Gerrit. If you modify any properties in this file, Gerrit needs to be restarted before it will use the new values. Sample `etc/gerrit.config`: ---- [core] packedGitLimit = 200 m [cache] directory = /var/cache/gerrit2 ---- [[accounts]] === Section accounts [[accounts.visibility]]accounts.visibility:: + Controls visibility of other users' dashboard pages and completion suggestions to web users. + If `ALL`, all users are visible to all other users, even anonymous users. + If `SAME_GROUP`, only users who are also members of a group the current user is a member of are visible. + If `VISIBLE_GROUP`, only users who are members of at least one group that is visible to the current user are visible. + If `NONE`, no users other than the current user are visible. + Default is `ALL`. [[addreviewer]] === Section addreviewer [[addreviewer.maxWithoutConfirmation]]addreviewer.maxWithoutConfirmation:: + The maximum number of reviewers a user can add at once by adding a group as reviewer without being asked to confirm the operation. + If set to 0, the user will never be asked to confirm adding a group as reviewer. + Default is 10. + This setting only applies for adding reviewers in the Gerrit Web UI, but is ignored when adding reviewers with the link:cmd-set-reviewers.html[set-reviewers] command. [[addreviewer.maxAllowed]]addreviewer.maxAllowed:: + The maximum number of reviewers a user can add at once by adding a group as reviewer. + If set to 0, there is no limit for the number of reviewers that can be added at once by adding a group as reviewer. + Default is 20. [[auth]] === Section auth See also link:config-sso.html[SSO configuration]. [[auth.type]]auth.type:: + Type of user authentication employed by Gerrit. The supported values are: + * `OpenID` + The default setting. Gerrit uses any valid OpenID provider chosen by the end-user. For more information see http://openid.net/[openid.net]. + * `OpenID_SSO` + Supports OpenID from a single provider. There is no registration link, and the "Sign In" link sends the user directly to the provider's SSO entry point. + * `HTTP` + Gerrit relies upon data presented in the HTTP request. This includes HTTP basic authentication, or some types of commercial single-sign-on solutions. With this setting enabled the authentication must take place in the web server or servlet container, and not from within Gerrit. + * `HTTP_LDAP` + Exactly like `HTTP` (above), but additionally Gerrit pre-populates a user's full name and email address based on information obtained from the user's account object in LDAP. The user's group membership is also pulled from LDAP, making any LDAP groups that a user is a member of available as groups in Gerrit. + * `CLIENT_SSL_CERT_LDAP` + This authentication type is actually kind of SSO. Gerrit will configure Jetty's SSL channel to request the client's SSL certificate. For this authentication to work a Gerrit administrator has to import the root certificate of the trust chain used to issue the client's certificate into the /etc/keystore. After the authentication is done Gerrit will obtain basic user registration (name and email) from LDAP, and some group memberships. Therefore, the "_LDAP" suffix in the name of this authentication type. This authentication type can only be used under hosted daemon mode, and the httpd.listenUrl must use https:// as the protocol. Optionally, certificate revocation list file can be used at /etc/crl.pem. For details, see httpd.sslCrl. + * `LDAP` + Gerrit prompts the user to enter a username and a password, which it then verifies by performing a simple bind against the configured <>. In this configuration the web server is not involved in the user authentication process. + The actual username used in the LDAP simple bind request is the account's full DN, which is discovered by first querying the directory using either an anonymous request, or the configured <> identity. Gerrit can also use kerberos if <> is set to `GSSAPI`. * `LDAP_BIND` + Gerrit prompts the user to enter a username and a password, which it then verifies by performing a simple bind against the configured <>. In this configuration the web server is not involved in the user authentication process. + Unlike `LDAP` above, the username used to perform the LDAP simple bind request is the exact string supplied in the dialog by the user. The configured <> identity is not used to obtain account information. + * OAUTH + OAuth is a protocol that lets external apps request authorization to private details in a user's account without getting their password. This is preferred over Basic Authentication because tokens can be limited to specific types of data, and can be revoked by users at any time. + Site owners have to register their application before getting started. Note that provider specific plugins must be used with this authentication scheme. + * `DEVELOPMENT_BECOME_ANY_ACCOUNT` + *DO NOT USE*. Only for use in a development environment. + When this is the configured authentication method a hyperlink titled `Become` appears in the top right corner of the page, taking the user to a form where they can enter the username of any existing user account, and immediately login as that account, without any authentication taking place. This form of authentication is only useful for the GWT hosted mode shell, where OpenID authentication redirects might be risky to the developer's host computer, and HTTP authentication is not possible. + By default, OpenID. [[auth.allowedOpenID]]auth.allowedOpenID:: + List of permitted OpenID providers. A user may only authenticate with an OpenID that matches this list. Only used if `auth.type` is set to `OpenID` (the default). + Patterns may be either a link:http://download.oracle.com/javase/6/docs/api/java/util/regex/Pattern.html[standard Java regular expression (java.util.regex)] (start with `^` and end with `$`) or be a simple prefix (any other string). + By default, the list contains two values, `http://` and `https://`, allowing users to authenticate with any OpenID provider. [[auth.trustedOpenID]]auth.trustedOpenID:: + List of trusted OpenID providers. Only used if `auth.type` is set to `OpenID` (the default). + In order for a user to take advantage of permissions beyond those granted to the `Anonymous Users` and `Registered Users` groups, the user account must only have OpenIDs which match at least one pattern from this list. + Patterns may be either a link:http://download.oracle.com/javase/6/docs/api/java/util/regex/Pattern.html[standard Java regular expression (java.util.regex)] (start with `^` and end with `$`) or be a simple prefix (any other string). + By default, the list contains two values, `http://` and `https://`, allowing Gerrit to trust any OpenID it receives. [[auth.openIdDomain]]auth.openIdDomain:: + List of allowed OpenID email address domains. Only used if `auth.type` is set to `OPENID` or `OPENID_SSO`. + Domain is case insensitive and must be in the same form as it appears in the email address, for example, "example.com". + By default, any domain is accepted. [[auth.maxOpenIdSessionAge]]auth.maxOpenIdSessionAge:: + Time in seconds before an OpenID provider must force the user to authenticate themselves again before authentication to this Gerrit server. Currently this is only a polite request, and users coming from providers that don't support the PAPE extension will be accepted anyway. In the future it may be enforced, rejecting users coming from providers that don't honor the max session age. + If set to 0, the provider will always force the user to authenticate (e.g. supply their password). Values should use common unit suffixes to express their setting: + * s, sec, second, seconds * m, min, minute, minutes * h, hr, hour, hours * d, day, days * w, week, weeks (`1 week` is treated as `7 days`) * mon, month, months (`1 month` is treated as `30 days`) * y, year, years (`1 year` is treated as `365 days`) + Default is -1, permitting infinite time between authentications. [[auth.registerEmailPrivateKey]]auth.registerEmailPrivateKey:: + Private key to use when generating an email verification token. + If not set, a random key is generated when running the link:pgm-init.html[site initialization]. [[auth.maxRegisterEmailTokenAge]]auth.maxRegisterEmailTokenAge:: + Time in seconds before an email verification token sent to a user in order to validate their email address expires. + * s, sec, second, seconds * m, min, minute, minutes * h, hr, hour, hours * d, day, days * w, week, weeks (`1 week` is treated as `7 days`) * mon, month, months (`1 month` is treated as `30 days`) * y, year, years (`1 year` is treated as `365 days`) + Default is 12 hours. [[auth.openIdSsoUrl]]auth.openIdSsoUrl:: + The SSO entry point URL. Only used if `auth.type` is set to `OpenID_SSO`. + The "Sign In" link will send users directly to this URL. [[auth.httpHeader]]auth.httpHeader:: + HTTP header to trust the username from, or unset to select HTTP basic or digest authentication. Only used if `auth.type` is set to `HTTP`. [[auth.httpDisplaynameHeader]]auth.httpDisplaynameHeader:: + HTTP header to retrieve the user's display name from. Only used if `auth.type` is set to `HTTP`. + If set, Gerrit trusts and enforces the user's full name using the HTTP header and disables the ability to manually modify the user's full name from the contact information page. [[auth.httpEmailHeader]]auth.httpEmailHeader:: + HTTP header to retrieve the user's e-mail from. Only used if `auth.type` is set to `HTTP`. + If set, Gerrit trusts and enforces the user's e-mail using the HTTP header and disables the ability to manually modify or register other e-mails from the contact information page. [[auth.httpExternalIdHeader]]auth.httpExternalIdHeader:: + HTTP header to retrieve the user's external identification token. Only used if `auth.type` is set to `HTTP`. + If set, Gerrit adds the value contained in the HTTP header to the user's identity. Typical use is with a federated identity token from an external system (e.g. GitHub OAuth 2.0 authentication) where the user's auth token exchanged during authentication handshake needs to be used for authenticated communication to the external system later on. + Example: `auth.httpExternalIdHeader: X-GitHub-OTP` [[auth.loginUrl]]auth.loginUrl:: + URL to redirect a browser to after the end-user has clicked on the login link in the upper right corner. Only used if `auth.type` is set to `HTTP` or `HTTP_LDAP`. Organizations using an enterprise single-sign-on solution may want to redirect the browser to the SSO product's sign-in page for completing the login process and validate their credentials. + If set, Gerrit allows anonymous access until the end-user performs the login and provides a trusted identity through the HTTP header. If not set, Gerrit requires the HTTP header with a trusted identity and returns the error page 'LoginRedirect.html' if such a header is not present. [[auth.loginText]]auth.loginText:: + Text displayed in the loginUrl link. Only used if `auth.loginUrl` is set. + If not set, the "Sign In" text is used. [[auth.registerPageUrl]]auth.registerPageUrl:: + URL of the registration page to use when a new user logs in to Gerrit for the first time. Used only when `auth.type` is set to `HTTP`. + If not set, the standard Gerrit registration page `/#/register/` is displayed. [[auth.logoutUrl]]auth.logoutUrl:: + URL to redirect a browser to after the end-user has clicked on the "Sign Out" link in the upper right corner. Organizations using an enterprise single-sign-on solution may want to redirect the browser to the SSO product's sign-out page. + If not set, the redirect returns to the list of all open changes. [[auth.registerUrl]]auth.registerUrl:: + Target for the "Register" link in the upper right corner. Used only when `auth.type` is `LDAP`, `LDAP_BIND` or `CUSTOM_EXTENSION`. + If not set, no "Register" link is displayed. [[auth.registerText]]auth.registerText:: + Text for the "Register" link in the upper right corner. Used only when `auth.type` is `LDAP`, `LDAP_BIND` or `CUSTOM_EXTENSION`. + If not set, defaults to "Register". [[auth.editFullNameUrl]]auth.editFullNameUrl:: + Target for the "Edit" button when the user is allowed to edit their full name. Used only when `auth.type` is `LDAP`, `LDAP_BIND` or `CUSTOM_EXTENSION`. [[auth.httpPasswordUrl]]auth.httpPasswordUrl:: + Target for the "Obtain Password" link. Used only when `auth.type` is `CUSTOM_EXTENSION`. [[auth.switchAccountUrl]]auth.switchAccountUrl:: + URL to switch user identities and login as a different account than the currently active account. This is disabled by default except when `auth.type` is `OPENID` and `DEVELOPMENT_BECOME_ANY_ACCOUNT`. If set the "Switch Account" link is displayed next to "Sign Out". + When `auth.type` does not normally enable this URL administrators may set this to `login/` or `$canonicalWebUrl/login`, allowing users to begin a new web session. [[auth.cookiePath]]auth.cookiePath:: + Sets "path" attribute of the authentication cookie. + If not set, HTTP request's path is used. [[auth.cookieSecure]]auth.cookieSecure:: + Sets "secure" flag of the authentication cookie. If true, cookies will be transmitted only over HTTPS protocol. + By default, false. [[auth.emailFormat]]auth.emailFormat:: + Optional format string to construct user email addresses out of user login names. Only used if `auth.type` is `HTTP`, `HTTP_LDAP` or `LDAP`. + This value can be set to a format string, where `{0}` is replaced with the login name. E.g. "\{0\}+gerrit@example.com" with a user login name of "foo" will produce "foo+gerrit@example.com" during the first time user "foo" registers. + If the site is using `HTTP_LDAP` or `LDAP`, using this option is discouraged. Setting `ldap.accountEmailAddress` and importing the email address from the LDAP directory is generally preferred. [[auth.contributorAgreements]]auth.contributorAgreements:: + Controls whether or not the contributor agreement features are enabled for the Gerrit site. If enabled a user must complete a contributor agreement before they can upload changes. + If enabled, the admin must also add one or more link:config-cla.html[contributor-agreement sections] in project.config and create agreement files under `'$site_path'/static`, so users can actually complete one or more agreements. + By default this is false (no agreements are used). + To enable the actual usage of contributor agreement the project specific config option in the `project.config` must be set: link:config-project-config.html[receive.requireContributorAgreement]. [[auth.trustContainerAuth]]auth.trustContainerAuth:: + If true then it is the responsibility of the container hosting Gerrit to authenticate users. In this case Gerrit will blindly trust the container. + This parameter only affects git over http traffic. If set to false then Gerrit will do the authentication (using DIGEST authentication). + By default this is set to false. [[auth.gitBasicAuth]]auth.gitBasicAuth:: + If true then Git over HTTP and HTTP/S traffic is authenticated using standard BasicAuth and the credentials are validated against the randomly generated HTTP password or against LDAP when it is configured as Gerrit Web UI authentication method. + This parameter affects git over HTTP traffic and access to the REST API. If set to false then Gerrit will authenticate through DIGEST authentication and the randomly generated HTTP password in the Gerrit database. + When `auth.type` is `LDAP`, service users that only exist in the Gerrit database are still authenticated by their HTTP passwords. + By default this is set to false. [[auth.userNameToLowerCase]]auth.userNameToLowerCase:: + If set the username that is received to authenticate a git operation is converted to lower case for looking up the user account in Gerrit. + By setting this parameter a case insensitive authentication for the git operations can be achieved, if it is ensured that the usernames in Gerrit (scheme `username`) are stored in lower case (e.g. if the parameter link:#ldap.accountSshUserName[ldap.accountSshUserName] is set to `${sAMAccountName.toLowerCase}`). It is important that for all existing accounts this username is already in lower case. It is not possible to convert the usernames of the existing accounts to lower case because this would break the access to existing per-user branches. + This parameter only affects git over http and git over SSH traffic. + By default this is set to false. [[auth.enableRunAs]]auth.enableRunAs:: + If true HTTP REST APIs will accept the `X-Gerrit-RunAs` HTTP request header from any users granted the link:access-control.html#capability_runAs[Run As] capability. The header and capability permit the authenticated user to impersonate another account. + If false the feature is disabled and cannot be re-enabled without editing gerrit.config and restarting the server. + Default is true. [[cache]] === Section cache [[cache.directory]]cache.directory:: + Path to a local directory where Gerrit can write cached entities for future lookup. This local disk cache is used to retain potentially expensive to compute information across restarts. If the location does not exist, Gerrit will try to create it. + If not absolute, the path is resolved relative to `$site_path`. + Default is unset, no disk cache. [[cache.name.maxAge]]cache..maxAge:: + Maximum age to keep an entry in the cache. Entries are removed from the cache and refreshed from source data every maxAge interval. Values should use common unit suffixes to express their setting: + * s, sec, second, seconds * m, min, minute, minutes * h, hr, hour, hours * d, day, days * w, week, weeks (`1 week` is treated as `7 days`) * mon, month, months (`1 month` is treated as `30 days`) * y, year, years (`1 year` is treated as `365 days`) + -- If a unit suffix is not specified, `seconds` is assumed. If 0 is supplied, the maximum age is infinite and items are never purged except when the cache is full. Default is `0`, meaning store forever with no expire, except: * `"adv_bases"`: default is `10 minutes` * `"ldap_groups"`: default is `1 hour` * `"web_sessions"`: default is `12 hours` -- [[cache.name.memoryLimit]]cache..memoryLimit:: + The total cost of entries to retain in memory. The cost computation varies by the cache. For most caches where the in-memory size of each entry is relatively the same, memoryLimit is currently defined to be the number of entries held by the cache (each entry costs 1). + For caches where the size of an entry can vary significantly between individual entries (notably `"diff"`, `"diff_intraline"`), memoryLimit is an approximation of the total number of bytes stored by the cache. Larger entries that represent bigger patch sets or longer source files will consume a bigger portion of the memoryLimit. For these caches the memoryLimit should be set to roughly the amount of RAM (in bytes) the administrator can dedicate to the cache. + Default is 1024 for most caches, except: + * `"adv_bases"`: default is `4096` * `"diff"`: default is `10m` (10 MiB of memory) * `"diff_intraline"`: default is `10m` (10 MiB of memory) * `"plugin_resources"`: default is 2m (2 MiB of memory) + If set to 0 the cache is disabled. Entries are removed immediately after being stored by the cache. This is primarily useful for testing. [[cache.name.diskLimit]]cache..diskLimit:: + Total size in bytes of the keys and values stored on disk. Caches that have grown bigger than this size are scanned daily at 1 AM local server time to trim the cache. Entries are removed in least recently accessed order until the cache fits within this limit. Caches may grow larger than this during the day, as the size check is only performed once every 24 hours. + Default is 128 MiB per cache. + If 0, disk storage for the cache is disabled. ==== [[cache_names]]Standard Caches cache `"accounts"`:: + Cache entries contain important details of an active user, including their display name, preferences, known email addresses, and group memberships. Entry information is obtained from the following database tables: + * `accounts` + * `account_group_members` + * `account_external_ids` + If direct updates are made to any of these database tables, this cache should be flushed. cache `"accounts_byemail"`:: + Caches account identities keyed by email address, which is scanned from the `account_external_ids` database table. If updates are made to this table, this cache should be flushed. cache `"adv_bases"`:: + Used only for push over smart HTTP when branch level access controls are enabled. The cache entry contains all commits that are available for the client to use as potential delta bases. Push over smart HTTP requires two HTTP requests, and this cache tries to carry state from the first request into the second to ensure it can complete. cache `"changes"`:: + The size of `memoryLimit` determines the number of projects for which all changes will be cached. If the cache is set to 1024, this means all changes for up to 1024 projects can be held in the cache. + Default value is 0 (disabled). It is disabled by default due to the fact that change updates are not communicated between Gerrit servers. Hence this cache should be disabled in an multi-master/multi-slave setup. + The cache should be flushed whenever the database changes table is modified outside of Gerrit. cache `"diff"`:: + Each item caches the differences between two commits, at both the directory and file levels. Gerrit uses this cache to accelerate the display of affected file names, as well as file contents. + Entries in this cache are relatively large, so memoryLimit is an estimate in bytes of memory used. Administrators should try to target cache.diff.memoryLimit to fit all changes users will view in a 1 or 2 day span. cache `"diff_intraline"`:: + Each item caches the intraline difference of one file, when compared between two commits. Gerrit uses this cache to accelerate display of intraline differences when viewing a file. + Entries in this cache are relatively large, so memoryLimit is an estimate in bytes of memory used. Administrators should try to target cache.diff.memoryLimit to fit all files users will view in a 1 or 2 day span. cache `"git_tags"`:: + If branch or reference level READ access controls are used, this cache tracks which tags are reachable from the branch tips of a repository. Gerrit uses this information to determine the set of tags that a client may access, derived from which tags are part of the history of a visible branch. + The cache is persisted to disk across server restarts as it can be expensive to compute (60 or more seconds for a large history like the Linux kernel repository). cache `"groups"`:: + Caches the basic group information from the `account_groups` table, including the group owner, name, and description. + Gerrit group membership obtained from the `account_group_members` table is cached under the `"accounts"` cache, above. External group membership obtained from LDAP is cached under `"ldap_groups"`. cache `"groups_byinclude"`:: + Caches group inclusions in other groups. If direct updates are made to the `account_group_includes` table, this cache should be flushed. cache `"groups_members"`:: + Caches subgroups. If direct updates are made to the `account_group_includes` table, this cache should be flushed. cache `"ldap_groups"`:: + Caches the LDAP groups that a user belongs to, if LDAP has been configured on this server. This cache should be configured with a low maxAge setting, to ensure LDAP modifications are picked up in a timely fashion. cache `"ldap_groups_byinclude"`:: + Caches the hierarchical structure of LDAP groups. cache `"ldap_usernames"`:: + Caches a mapping of LDAP username to Gerrit account identity. The cache automatically updates when a user first creates their account within Gerrit, so the cache expire time is largely irrelevant. cache `"permission_sort"`:: + Caches the order in which access control sections must be applied to a reference. Sorting the sections can be expensive when regular expressions are used, so this cache remembers the ordering for each branch. cache `"plugin_resources"`:: + Caches formatted plugin resources, such as plugin documentation that has been converted from Markdown to HTML. The memoryLimit refers to the bytes of memory dedicated to storing the documentation. cache `"projects"`:: + Caches the project description records, from the `projects` table in the database. If a project record is updated or deleted, this cache should be flushed. Newly inserted projects do not require a cache flush, as they will be read upon first reference. cache `"sshkeys"`:: + Caches unpacked versions of user SSH keys, so the internal SSH daemon can match against them during authentication. The unit of storage is per-user, so 1024 items translates to 1024 unique user accounts. As each individual user account may configure multiple SSH keys, the total number of keys may be larger than the item count. + This cache is based off the `account_ssh_keys` table and the `accounts.ssh_user_name` column in the database. If either is modified directly, this cache should be flushed. cache `"web_sessions"`:: + Tracks the live user sessions coming in over HTTP. Flushing this cache would cause all users to be signed out immediately, forcing them to sign-in again. To avoid breaking active users, this cache is not flushed automatically by `gerrit flush-caches --all`, but instead must be explicitly requested. + If no disk cache is configured (or `cache.web_sessions.diskLimit` is set to 0) a server restart will force all users to sign-out, and need to sign-in again after the restart, as the cache was unable to persist the session information. Enabling a disk cache is strongly recommended. + Session storage is relatively inexpensive. The average entry in this cache is approximately 346 bytes. See also link:cmd-flush-caches.html[gerrit flush-caches]. ==== [[cache_options]]Cache Options [[cache.diff.timeout]]cache.diff.timeout:: + Maximum number of milliseconds to wait for diff data before giving up and falling back on a simpler diff algorithm that will not be able to break down modified regions into smaller ones. This is a work around for an infinite loop bug in the default difference algorithm implementation. + Values should use common unit suffixes to express their setting: + * ms, milliseconds * s, sec, second, seconds * m, min, minute, minutes * h, hr, hour, hours + -- If a unit suffix is not specified, `milliseconds` is assumed. Default is 5 seconds. -- [[cache.diff_intraline.timeout]]cache.diff_intraline.timeout:: + Maximum number of milliseconds to wait for intraline difference data before giving up and disabling it for a particular file pair. This is a work around for an infinite loop bug in the intraline difference implementation. + If computation takes longer than the timeout, the worker thread is terminated, an error message is shown, and no intraline difference is displayed for the file pair. + Values should use common unit suffixes to express their setting: + * ms, milliseconds * s, sec, second, seconds * m, min, minute, minutes * h, hr, hour, hours + -- If a unit suffix is not specified, `milliseconds` is assumed. Default is 5 seconds. -- [[cache.diff_intraline.enabled]]cache.diff_intraline.enabled:: + Boolean to enable or disable the computation of intraline differences when populating a diff cache entry. This flag is provided primarily as a backdoor to disable the intraline difference feature if necessary. To maintain backwards compatibility with prior versions, this setting will fallback to `cache.diff.intraline` if not set in the configuration. + Default is true, enabled. [[cache.projects.checkFrequency]]cache.projects.checkFrequency:: + How often project configuration should be checked for update from Git. Gerrit Code Review caches project access rules and configuration in memory, checking the refs/meta/config branch every checkFrequency minutes to see if a new revision should be loaded and used for future access. Values can be specified using standard time unit abbreviations ('ms', 'sec', 'min', etc.). + If set to 0, checks occur every time, which may slow down operations. If set to 'disabled' or 'off', no check will ever be done. Administrators may force the cache to flush with link:cmd-flush-caches.html[gerrit flush-caches]. + Default is 5 minutes. [[cache.projects.loadOnStartup]]cache.projects.loadOnStartup:: + If the project cache should be loaded during server startup. + The cache is loaded concurrently. Admins should ensure that the cache size set under <> is not smaller than the number of repos. + Default is false, disabled. [[cache.projects.loadThreads]]cache.projects.loadThreads:: + Only relevant if <> is true. + The number of threads to allocate for loading the cache at startup. These threads will die out after the cache is loaded. + Default is the number of CPUs. [[change]] === Section change [[change.largeChange]]change.largeChange:: + Number of changed lines from which on a change is considered as a large change. The number of changed lines of a change is the sum of the lines that were inserted and deleted in the change. + The specified value is used to visualize the change sizes in the Web UI in change tables and user dashboards. + By default 500. [[change.updateDelay]]change.updateDelay:: + How often in seconds the web interface should poll for updates to the currently open change. The poller relies on the client's browser cache to use If-Modified-Since and respect `304 Not Modified` HTTP responses. This allows for fast polls, often under 8 milliseconds. + With a configured 30 second delay a server with 4900 active users will typically need to dedicate 1 CPU to the update check. 4900 users divided by an average delay of 30 seconds is 163 requests arriving per second. If requests are served at \~6 ms response time, 1 CPU is necessary to keep up with the update request traffic. On a smaller user base of 500 active users, the default 30 second delay is only 17 requests per second and requires ~10% CPU. + If 0 the update polling is disabled. + Default is 30 seconds. [[change.allowDrafts]]change.allowDrafts:: + Allow drafts workflow. If set to false, drafts cannot be created, deleted or published. + Default is true. [[change.submitLabel]]change.submitLabel:: + Label name for the submit button. + Default is "Submit". [[change.submitLabelWithParents]]change.submitLabelWithParents:: + Label name for the submit button if the change has parents which will be submitted together with this change. + Default is "Submit including parents". [[change.submitTooltip]]change.submitTooltip:: + Tooltip for the submit button. Variables available for replacement include `${patchSet}` for the current patch set number (1, 2, 3), `${branch}` for the branch name ("master") and `${commit}` for the abbreviated commit SHA-1 (`c9c0edb`). + Default is "Submit patch set ${patchSet} into ${branch}". [[change.submitTooltipAncestors]]change.submitTooltipAncestors:: + Tooltip for the submit button if there are ancestors which would also be submitted by submitting the change. Additionally to the variables as in link:#change.submitTooltip[change.submitTooltip], there is the variable `${submitSize}` indicating the number of changes which are submitted. + Default is "Submit all ${topicSize} changes of the same topic (${submitSize} changes including ancestors and other changes related by topic)". [[change.submitWholeTopic]]change.submitWholeTopic:: + Determines if the submit button submits the whole topic instead of just the current change. + Default is false. [[change.submitTopicLabel]]change.submitTopicLabel:: + If `change.submitWholeTopic` is set and a change has a topic, the label name for the submit button is given here instead of the configuration `change.submitLabel`. + Defaults to "Submit whole topic" [[change.submitTopicTooltip]]change.submitTopicTooltip:: + If `change.submitWholeTopic` is configuerd to true and a change has a topic, this configuration determines the tooltip for the submit button instead of `change.submitTooltip`. The variable `${topicSize}` is available for the number of changes in the same topic to be submitted. The number of all changes to be submitted is in the variable `${submitSize}`. + Defaults to "Submit all ${topicSize} changes of the same topic (${submitSize} changes including ancestors and other changes related by topic)". [[change.replyLabel]]change.replyLabel:: + Label name for the reply button. In the user interface an ellipsis (…) is appended. + Default is "Reply". In the user interface it becomes "Reply…". [[change.replyTooltip]]change.replyTooltip:: + Tooltip for the reply button. In the user interface a note about the keyboard shortcut is appended. + Default is "Reply and score". In the user interface it becomes "Reply and score (Shortcut: a)". [[changeCleanup]] === Section changeCleanup This section allows to configure change cleanups and schedules them to run periodically. [[changeCleanup.abandonAfter]]changeCleanup.abandonAfter:: + Period of inactivity after which open changes should be abandoned automatically. + By default `0`, never abandon open changes. + [WARNING] Auto-Abandoning changes may confuse/annoy users. When enabling this, make sure to choose a reasonably large grace period and inform users in advance. + The following suffixes are supported to define the time unit: + * `d, day, days` * `w, week, weeks` (`1 week` is treated as `7 days`) * `mon, month, months` (`1 month` is treated as `30 days`) * `y, year, years` (`1 year` is treated as `365 days`) [[changeCleanup.abandonIfMergeable]]changeCleanup.abandonIfMergeable:: + Whether changes which are mergeable should be auto-abandoned. + By default `true`. [[changeCleanup.abandonMessage]]changeCleanup.abandonMessage:: + Change message that should be posted when a change is abandoned. + '${URL}' can be used as a placeholder for the Gerrit web URL. + By default "Auto-Abandoned due to inactivity, see ${URL}Documentation/user-change-cleanup.html#auto-abandon\n\n If this change is still wanted it should be restored.". [[changeCleanup.startTime]]changeCleanup.startTime:: + Start time to define the first execution of the change cleanups. If the configured `'changeCleanup.interval'` is shorter than `'changeCleanup.startTime - now'` the start time will be preponed by the maximum integral multiple of `'changeCleanup.interval'` so that the start time is still in the future. + ---- : or : : Mon, Tue, Wed, Thu, Fri, Sat, Sun : 00-23 : 0-59 ---- [[changeCleanup.interval]]changeCleanup.interval:: + Interval for periodic repetition of triggering the change cleanups. The interval must be larger than zero. The following suffixes are supported to define the time unit for the interval: + * `s, sec, second, seconds` * `m, min, minute, minutes` * `h, hr, hour, hours` * `d, day, days` * `w, week, weeks` (`1 week` is treated as `7 days`) * `mon, month, months` (`1 month` is treated as `30 days`) * `y, year, years` (`1 year` is treated as `365 days`) link:#schedule-examples[Schedule examples] can be found in the link:#gc[gc] section. [[changeMerge]] === Section changeMerge [[changeMerge.checkFrequency]]changeMerge.checkFrequency:: + How often the database should be rescanned for changes that have been submitted but not merged due to transient errors. Values can be specified using standard time unit abbreviations ('ms', 'sec', 'min', etc.). Set to 0 to disable periodic rescanning, only scanning once on master node startup. + Default is 300 seconds (5 minutes). [[changeMerge.threadPoolSize]]changeMerge.threadPoolSize:: + _Deprecated:_ Formerly used to control thread pool size for background mergeability checks. These checks were moved to the indexing threadpool, so this value is now used for link:#index.batchThreads[index.batchThreads], only if that value is not provided. + This option may be removed in a future version. [[changeMerge.interactiveThreadPoolSize]]changeMerge.interactiveThreadPoolSize:: + _Deprecated:_ Formerly used to control thread pool size for interactive mergeability checks. These checks were moved to the indexing threadpool, so this value is now used for link:#index.threads[index.threads], only if that value is not provided. + This option may be removed in a future version. [[commentlink]] === Section commentlink Comment links are find/replace strings applied to change descriptions, patch comments, in-line code comments and approval category value descriptions to turn set strings into hyperlinks. One common use is for linking to bug-tracking systems. In the following example configuration the 'changeid' comment link will match typical Gerrit Change-Id values and create a hyperlink to changes which reference it. The second configuration 'bugzilla' will hyperlink terms such as 'bug 42' to an external bug tracker, supplying the argument record number '42' for display. The third configuration 'tracker' uses raw HTML to more precisely control how the replacement is displayed to the user. ---- [commentlink "changeid"] match = (I[0-9a-f]{8,40}) link = "#q,$1" [commentlink "bugzilla"] match = "(bug\\s+#?)(\\d+)" link = http://bugs.example.com/show_bug.cgi?id=$2 [commentlink "tracker"] match = ([Bb]ug:\\s+)(\\d+) html = $1$2 ---- Comment links can also be specified in `project.config` and sections in children override those in parents. The only restriction is that to avoid injecting arbitrary user-supplied HTML in the page, comment links defined in `project.config` may only supply `link`, not `html`. [[commentlink.name.match]]commentlink..match:: + A JavaScript regular expression to match positions to be replaced with a hyperlink. Subexpressions of the matched string can be stored using groups and accessed with `$'n'` syntax, where 'n' is the group number, starting from 1. + The configuration file parser eats one level of backslashes, so the character class `\s` requires `\\s` in the configuration file. The parser also terminates the line at the first `#`, so a match expression containing # must be wrapped in double quotes. + To match case insensitive strings, a character class with both the upper and lower case character for each position must be used. For example, to match the string `bug` in a case insensitive way the match pattern `[bB][uU][gG]` needs to be used. + A common pattern to match is `bug\\s+(\\d+)`. [[commentlink.name.link]]commentlink..link:: + The URL to direct the user to whenever the regular expression is matched. Groups in the match expression may be accessed as `$'n'`. + The link property is used only when the html property is not present. [[commentlink.name.html]]commentlink..html:: + HTML to replace the entire matched string with. If present, this property overrides the link property above. Groups in the match expression may be accessed as `$'n'`. + The configuration file eats double quotes, so escaping them as `\"` is necessary to protect them from the parser. [[commentlink.name.enabled]]commentlink..enabled:: + Whether the comment link is enabled. A child project may override a section in a parent or the site-wide config that is disabled by specifying `enabled = true`. + Disabling sections in `gerrit.config` can be used by site administrators to create a library of comment links with `html` set that are not user-supplied and thus can be verified to be XSS-free, but are only enabled for a subset of projects. + By default, true. + Note that the names and contents of disabled sections are visible even to anonymous users via the link:rest-api-projects.html#get-config[REST API]. [[container]] === Section container These settings are applied only if Gerrit is started as the container process through Gerrit's 'gerrit.sh' rc.d compatible wrapper script. [[container.heapLimit]]container.heapLimit:: + Maximum heap size of the Java process running Gerrit, in bytes. This property is translated into the '-Xmx' flag for the JVM. + Default is platform and JVM specific. + Common unit suffixes of 'k', 'm', or 'g' are supported. [[container.javaHome]]container.javaHome:: + Path of the JRE/JDK installation to run Gerrit with. If not set, the Gerrit startup script will attempt to search your system and guess a suitable JRE. Overrides the environment variable 'JAVA_HOME'. [[container.javaOptions]]container.javaOptions:: + Additional options to pass along to the Java runtime. If multiple values are configured, they are passed in order on the command line, separated by spaces. These options are appended onto 'JAVA_OPTIONS'. For example, it is possible to overwrite Gerrit's default log4j configuration: ---- javaOptions = -Dlog4j.configuration=file:///home/gerrit/site/etc/log4j.properties ---- [[container.daemonOpt]]container.daemonOpt:: + Additional options to pass to the daemon (e.g. '--enable-httpd'). If multiple values are configured, they are passed in that order to the command line, separated by spaces. + Execute `java -jar gerrit.war daemon --help` to see all possible options. [[container.slave]]container.slave:: + Used on Gerrit slave installations. If set to true the Gerrit JVM is called with the '--slave' switch, enabling slave mode. If no value is set (or any other value), Gerrit defaults to master mode. [[container.user]]container.user:: + Login name (or UID) of the operating system user the Gerrit JVM will execute as. If not set, defaults to the user who launched the 'gerrit.sh' wrapper script. [[container.war]]container.war:: + Path of the JAR file to start daemon execution with. This should be the path of the local 'gerrit.war' archive. Overrides the environment variable 'GERRIT_WAR'. + If not set, defaults to '$site_path/bin/gerrit.war', or to '$HOME/gerrit.war'. [[core]] === Section core [[core.packedGitWindowSize]]core.packedGitWindowSize:: + Number of bytes of a pack file to load into memory in a single read operation. This is the "page size" of the JGit buffer cache, used for all pack access operations. All disk IO occurs as single window reads. Setting this too large may cause the process to load more data than is required; setting this too small may increase the frequency of `read()` system calls. + Default on JGit is 8 KiB on all platforms. + Common unit suffixes of 'k', 'm', or 'g' are supported. [[core.packedGitLimit]]core.packedGitLimit:: + Maximum number of bytes to load and cache in memory from pack files. If JGit needs to access more than this many bytes it will unload less frequently used windows to reclaim memory space within the process. As this buffer must be shared with the rest of the JVM heap, it should be a fraction of the total memory available. + Default on JGit is 10 MiB on all platforms. + Common unit suffixes of 'k', 'm', or 'g' are supported. [[core.deltaBaseCaseLimit]]core.deltaBaseCacheLimit:: + Maximum number of bytes to reserve for caching base objects that multiple deltafied objects reference. By storing the entire decompressed base object in a cache Git is able to avoid unpacking and decompressing frequently used base objects multiple times. + Default on JGit is 10 MiB on all platforms. You probably do not need to adjust this value. + Common unit suffixes of 'k', 'm', or 'g' are supported. [[core.packedGitOpenFiles]]core.packedGitOpenFiles:: + Maximum number of pack files to have open at once. A pack file must be opened in order for any of its data to be available in a cached window. + If you increase this to a larger setting you may need to also adjust the ulimit on file descriptors for the host JVM, as Gerrit needs additional file descriptors available for network sockets and other repository data manipulation. + Default on JGit is 128 file descriptors on all platforms. [[core.streamFileThreshold]]core.streamFileThreshold:: + Largest object size, in bytes, that JGit will allocate as a contiguous byte array. Any file revision larger than this threshold will have to be streamed, typically requiring the use of temporary files under '$GIT_DIR/objects' to implement pseudo-random access during delta decompression. + Servers with very high traffic should set this to be larger than the size of their common big files. For example a server managing the Android platform typically has to deal with ~10-12 MiB XML files, so `15 m` would be a reasonable setting in that environment. Setting this too high may cause the JVM to run out of heap space when handling very big binary files, such as device firmware or CD-ROM ISO images. + Defaults to 25% of the available JVM heap, limited to 2048m. + Common unit suffixes of 'k', 'm', or 'g' are supported. [[core.packedGitMmap]]core.packedGitMmap:: + When true, JGit will use `mmap()` rather than `malloc()+read()` to load data from pack files. The use of mmap can be problematic on some JVMs as the garbage collector must deduce that a memory mapped segment is no longer in use before a call to `munmap()` can be made by the JVM native code. + In server applications (such as Gerrit) that need to access many pack files, setting this to true risks artificially running out of virtual address space, as the garbage collector cannot reclaim unused mapped spaces fast enough. + Default on JGit is false. Although potentially slower, it yields much more predictable behavior. [[core.asyncLoggingBufferSize]]core.asyncLoggingBufferSize:: + Size of the buffer to store logging events for asynchronous logging. Putting a larger value can protect threads from stalling when the AsyncAppender threads are not fast enough to consume the logging events from the buffer. It also protects from losing log entries in this case. + Default is 64 entries. [[core.useRecursiveMerge]]core.useRecursiveMerge:: + Use JGit's recursive merger for three-way merges. This only affects projects that allow content merges. + As explained in this link:http://codicesoftware.blogspot.com/2011/09/merge-recursive-strategy.html[ blog], the recursive merge produces better results if the two commits that are merged have more than one common predecessor. + Default is true. [[database]] === Section database The database section configures where Gerrit stores its metadata records about user accounts and change reviews. ---- [database] type = POSTGRESQL hostname = localhost database = reviewdb username = gerrit2 password = s3kr3t ---- [[database.type]]database.type:: + Type of database server to connect to. If set this value will be used to automatically create correct database.driver and database.url values to open the connection. + * `POSTGRESQL` + Connect to a PostgreSQL database server. + * `H2` + Connect to a local embedded H2 database. + * `MYSQL` + Connect to a MySQL database server. + * `JDBC` + Connect using a JDBC driver class name and URL. + If not specified, database.driver and database.url are used as-is, and if they are also not specified, defaults to H2. [[database.hostname]]database.hostname:: + Hostname of the database server. Defaults to 'localhost'. [[database.port]]database.port:: + Port number of the database server. Defaults to the default port of the server named by database.type. [[database.database]]database.database:: + For POSTGRESQL or MYSQL, the name of the database on the server. + For H2, this is the path to the database, and if not absolute is relative to `'$site_path'`. [[database.username]]database.username:: + Username to connect to the database server as. [[database.password]]database.password:: + Password to authenticate to the database server with. [[database.driver]]database.driver:: + Name of the JDBC driver class to connect to the database with. Setting this usually isn't necessary as it can be derived from database.type or database.url for any supported database. [[database.url]]database.url:: + 'jdbc:' URL for the database. Setting this variable usually isn't necessary as it can be constructed from the all of the above properties. [[database.connectionPool]]database.connectionPool:: + If true, use connection pooling for database connections. Otherwise, a new database connection is opened for each request. + Default is false for MySQL, and true for other database backends. [[database.poolLimit]]database.poolLimit:: + Maximum number of open database connections. If the server needs more than this number, request processing threads will wait up to <> seconds for a connection to be released before they abort with an exception. This limit must be several units higher than the total number of httpd and sshd threads as some request processing code paths may need multiple connections. + Default is 8. + This setting only applies if <> is true. [[database.poolMinIdle]]database.poolMinIdle:: + Minimum number of connections to keep idle in the pool. Default is 4. + This setting only applies if <> is true. [[database.poolMaxIdle]]database.poolMaxIdle:: + Maximum number of connections to keep idle in the pool. If there are more idle connections, connections will be closed instead of being returned back to the pool. Default is 4. + This setting only applies if <> is true. [[database.poolMaxWait]]database.poolMaxWait:: + Maximum amount of time a request processing thread will wait to acquire a database connection from the pool. If no connection is released within this time period, the processing thread will abort its current operations and return an error to the client. Values should use common unit suffixes to express their setting: + * ms, milliseconds * s, sec, second, seconds * m, min, minute, minutes * h, hr, hour, hours + -- If a unit suffix is not specified, `milliseconds` is assumed. Default is `30 seconds`. This setting only applies if <> is true. -- [[database.dataSourceInterceptorClass]]database.dataSourceInterceptorClass:: Class that implements DataSourceInterceptor interface to monitor SQL activity. This class must have default constructor and be available on Gerrit's bootstrap classpath, e. g. in `$gerrit_site/lib` directory. Example implementation of SQL monitoring can be found in javamelody-plugin. [[download]] === Section download ---- [download] command = checkout command = cherry_pick command = pull command = format_patch scheme = ssh scheme = http scheme = anon_http scheme = anon_git scheme = repo_download ---- The download section configures the allowed download methods. [[download.command]]download.command:: + Commands that should be offered to download changes. + Multiple commands are supported: + * `checkout` + Command to fetch and checkout the patch set. + * `cherry_pick` + Command to fetch the patch set and to cherry-pick it onto the current commit. + * `pull` + Command to pull the patch set. + * `format_patch` + Command to fetch the patch set and to feed it into the `format-patch` command. + If `download.command` is not specified, all download commands are offered. [[download.scheme]]download.scheme:: + Schemes that should be used to download changes. + Multiple schemes are supported: + * `http` + Authenticated HTTP download is allowed. + * `ssh` + Authenticated SSH download is allowed. + * `anon_http` + Anonymous HTTP download is allowed. + * `anon_git` + Anonymous Git download is allowed. This is not default, it is also necessary to set <> variable. + * `repo_download` + Gerrit advertises patch set downloads with the `repo download` command, assuming that all projects managed by this instance are generally worked on with the repo multi-repository tool. This is not default, as not all instances will deploy repo. + If `download.scheme` is not specified, SSH, HTTP and Anonymous HTTP downloads are allowed. [[download.checkForHiddenChangeRefs]]download.checkForHiddenChangeRefs:: + Whether the download commands should be adapted when the change refs are hidden. + Git has a configuration option to hide refs from the initial advertisement (`uploadpack.hideRefs`). This option can be used to hide the change refs from the client. As consequence fetching changes by change ref does not work anymore. However by setting `uploadpack.allowTipSha1InWant` to `true` fetching changes by commit ID is possible. If `download.checkForHiddenChangeRefs` is set to `true` the git download commands use the commit ID instead of the change ref when a project is configured like this. + Example git configuration on a project: + ---- [uploadpack] hideRefs = refs/changes/ hideRefs = refs/cache-automerge/ allowTipSha1InWant = true ---- + By default `false`. [[download.archive]]download.archive:: + Specifies which archive formats, if any, should be offered on the change screen and supported for `git-upload-archive` operation: + ---- [download] archive = tar archive = tbz2 archive = tgz archive = txz archive = zip ---- If `download.archive` is not specified defaults to all archive commands. Set to `off` or empty string to disable. Zip is not supported because it may be interpreted by a Java plugin as a valid JAR file, whose code would have access to cookies on the domain. For this reason `zip` format is always excluded from formats offered through the `Download` drop down or accessible in the REST API. [[gc]] === Section gc This section allows to configure the git garbage collection and schedules it to run periodically. It will be triggered and executed sequentially for all projects. [[gc.aggressive]]gc.aggressive:: + Determines if scheduled garbage collections and garbage collections triggered through Web-UI should run in aggressive mode or not. Aggressive garbage collections are more expensive but may lead to significantly smaller repositories. + Valid values are "true" and "false," default is "false". [[gc.startTime]]gc.startTime:: + Start time to define the first execution of the git garbage collection. If the configured `'gc.interval'` is shorter than `'gc.startTime - now'` the start time will be preponed by the maximum integral multiple of `'gc.interval'` so that the start time is still in the future. + ---- : or : : Mon, Tue, Wed, Thu, Fri, Sat, Sun : 00-23 : 0-59 ---- [[gc.interval]]gc.interval:: + Interval for periodic repetition of triggering the git garbage collection. The interval must be larger than zero. The following suffixes are supported to define the time unit for the interval: + * `s, sec, second, seconds` * `m, min, minute, minutes` * `h, hr, hour, hours` * `d, day, days` * `w, week, weeks` (`1 week` is treated as `7 days`) * `mon, month, months` (`1 month` is treated as `30 days`) * `y, year, years` (`1 year` is treated as `365 days`) [[schedule-examples]] Examples:: + ---- gc.startTime = Fri 10:30 gc.interval = 2 day ---- + Assuming the server is started on Mon 7:00 -> `'startTime - now = 4 days 3:30 hours'`. This is larger than the interval hence prepone the start time by the maximum integral multiple of the interval so that start time is still in the future, i.e. prepone by 4 days. This yields a start time of Mon 10:30, next executions are Wed 10:30, Fri 10:30 etc. + ---- gc.startTime = 6:00 gc.interval = 1 day ---- + Assuming the server is started on Mon 7:00 this yields the first run on next Tuesday at 6:00 and a repetition interval of 1 day. [[gerrit]] === Section gerrit [[gerrit.basePath]]gerrit.basePath:: + Local filesystem directory holding all Git repositories that Gerrit knows about and can process changes for. A project entity in Gerrit maps to a local Git repository by creating the path string `"${basePath}/${project_name}.git"`. + If relative, the path is resolved relative to `'$site_path'`. [[gerrit.allProjects]]gerrit.allProjects:: + Name of the permissions-only project defining global server access controls and settings. These are inherited into every other project managed by the running server. The name is relative to `gerrit.basePath`. + Defaults to `All-Projects` if not set. [[gerrit.allUsers]]gerrit.allUsers:: + Name of the project in which meta data of all users is stored. The name is relative to `gerrit.basePath`. + Defaults to `All-Users` if not set. [[gerrit.canonicalWebUrl]]gerrit.canonicalWebUrl:: + The default URL for Gerrit to be accessed through. + Typically this would be set to "http://review.example.com/" or "http://example.com/gerrit/" so Gerrit can output links that point back to itself. + Setting this is highly recommended, as its necessary for the upload code invoked by "git push" or "repo upload" to output hyperlinks to the newly uploaded changes. [[gerrit.canonicalGitUrl]]gerrit.canonicalGitUrl:: + Optional base URL for repositories available over the anonymous git protocol. For example, set this to `git://mirror.example.com/base/` to have Gerrit display patch set download URLs in the UI. Gerrit automatically appends the project name onto the end of the URL. + By default unset, as the git daemon must be configured externally by the system administrator, and might not even be running on the same host as Gerrit. [[gerrit.docUrl]]gerrit.docUrl:: + Optional base URL for documentation, under which one can find "index.html", "rest-api.html", etc. Used as the base for the fixed set of links in the "Documentation" tab. A slash is implicitly appended. (For finer control over the top menu, consider writing a link:dev-plugins.html#top-menu-extensions[plugin].) + If unset or empty, the documentation tab will only be shown if `/Documentation/index.html` can be reached by the browser at app load time. [[gerrit.editGpgKeys]]gerrit.editGpgKeys:: + If enabled and server-side signed push validation is also link:#receive.enableSignedPush[enabled], enable the link:rest-api-accounts.html#list-gpg-keys[REST API endpoints] and web UI for editing GPG keys. If disabled, GPG keys can only be added by administrators with direct git access to All-Users. + Defaults to true. [[gerrit.installCommitMsgHookCommand]]gerrit.installCommitMsgHookCommand:: + Optional command to install the `commit-msg` hook. Typically of the form: + ---- fetch-cmd some://url/to/commit-msg .git/hooks/commit-msg ; chmod +x .git/hooks/commit-msg ---- + By default unset; falls back to using scp from the canonical SSH host, or curl from the canonical HTTP URL for the server. Only necessary if a proxy or other server/network configuration prevents clients from fetching from the default location. [[gerrit.gitHttpUrl]]gerrit.gitHttpUrl:: + Optional base URL for repositories available over the HTTP protocol. For example, set this to `http://mirror.example.com/base/` to have Gerrit display URLs from this server, rather than itself. + By default unset, as the HTTP daemon must be configured externally by the system administrator, and might not even be running on the same host as Gerrit. [[gerrit.reportBugUrl]]gerrit.reportBugUrl:: + URL to direct users to when they need to report a bug. + By default unset, meaning no bug report URL will be displayed. Administrators should set this to the URL of their issue tracker, if necessary. [[gerrit.reportBugText]]gerrit.reportBugText:: + Text to be displayed in the link to the bug report URL. + Only used when `gerrit.reportBugUrl` is set. + Defaults to "Report Bug". [[gerrit.disableReverseDnsLookup]]gerrit.disableReverseDnsLookup:: + Disables reverse DNS lookup during computing ref log entry for identified user. + Defaults to false. [[gerrit.secureStoreClass]]gerrit.secureStoreClass:: + Use the secure store implementation from a specified class. + If specified, must be the fully qualified class name of a class that implements the `com.google.gerrit.server.securestore.SecureStore` interface, and the jar file containing the class must be placed in the `$site_path/lib` folder. + If not specified, the default no-op implementation is used. [[gitweb]] === Section gitweb Gerrit can forward requests to either an internally managed gitweb (which allows Gerrit to enforce some access controls), or to an externally managed gitweb (where the web server manages access). See also link:config-gitweb.html[Gitweb Integration]. [[gitweb.cgi]]gitweb.cgi:: + Path to the locally installed `gitweb.cgi` executable. This CGI will be called by Gerrit Code Review when the URL `/gitweb` is accessed. Project level access controls are enforced prior to calling the CGI. + Defaults to `/usr/lib/cgi-bin/gitweb.cgi` if gitweb.url is not set. [[gitweb.url]]gitweb.url:: + Optional URL of an affiliated gitweb service. Defines the web location where a `gitweb.cgi` is installed to browse gerrit.basePath and the repositories it contains. + Gerrit appends any necessary query arguments onto the end of this URL. For example, "?p=$project.git;h=$commit". [[gitweb.type]]gitweb.type:: + Optional type of affiliated gitweb service. This allows using alternatives to gitweb, such as cgit. If set to disabled there is no gitweb hyperlinking support. + Valid values are `gitweb`, `cgit`, `disabled` or `custom`. [[gitweb.revision]]gitweb.revision:: + Optional pattern to use for constructing the gitweb URL when pointing at a specific commit when `custom` is used above. + Valid replacements are `${project}` for the project name in Gerrit and `${commit}` for the SHA1 hash for the commit. [[gitweb.project]]gitweb.project:: + Optional pattern to use for constructing the gitweb URL when pointing at a specific project when `custom` is used above. + Valid replacements are `${project}` for the project name in Gerrit. [[gitweb.branch]]gitweb.branch:: + Optional pattern to use for constructing the gitweb URL when pointing at a specific branch when `custom` is used above. + Valid replacements are `${project}` for the project name in Gerrit and `${branch}` for the name of the branch. [[gitweb.roottree]]gitweb.roottree:: + Optional pattern to use for constructing the gitweb URL when pointing at the contents of the root tree in a specific commit when `custom` is used above. + Valid replacements are `${project}` for the project name in Gerrit and `${commit}` for the SHA1 hash for the commit. [[gitweb.file]]gitweb.file:: + Optional pattern to use for constructing the gitweb URL when pointing at the contents of a file in a specific commit when `custom` is used above. + Valid replacements are `${project}` for the project name in Gerrit, `${file}` for the file name and `${commit}` for the SHA1 hash for the commit. [[gitweb.filehistory]]gitweb.filehistory:: + Optional pattern to use for constructing the gitweb URL when pointing at the history of a file in a specific branch when `custom` is used above. + Valid replacements are `${project}` for the project name in Gerrit, `${file}` for the file name and `${branch}` for the name of the branch. [[gitweb.linkname]]gitweb.linkname:: + Optional setting for modifying the link name presented to the user in the Gerrit web-UI. + Default linkname for custom type is "gitweb". [[gitweb.pathSeparator]]gitweb.pathSeparator:: + Optional character to substitute the standard path separator (slash) in project names and branch names. + By default, Gerrit will use hexadecimal encoding for slashes in project and branch names. Some web servers, such as Tomcat, reject this hexadecimal encoding in the URL. + Some alternative gitweb services, such as link:http://gitblit.com[Gitblit], allow using an alternative path separator character. In Gitblit, this can be configured through the property link:http://gitblit.com/properties.html[web.forwardSlashCharacter]. In Gerrit, the alternative path separator can be configured correspondingly using the property 'gitweb.pathSeparator'. + Valid values are the characters '*', '(' and ')'. [[gitweb.linkDrafts]]gitweb.urlEncode:: + Whether or not Gerrit should encode the generated viewer URL. + Gerrit composes the viewer URL using information about the project, branch, file or commit of the target object to be displayed. Typically viewers such as CGit and gitweb do need those parts to be encoded, including the '/' in project's name, for being correctly parsed. However other viewers could instead require an unencoded URL (e.g. GitHub web based viewer) + Valid values are "true" and "false," default is "true." [[gitweb.linkDrafts]]gitweb.linkDrafts:: + Whether or not Gerrit should provide links to gitweb on draft patch sets. + By default, Gerrit will show links to gitweb on all patch sets. If gitweb only allows publicly viewable references, set this to false to remove the links to draft patch sets from the change review screen. + Valid values are "true" and "false," default is "true". [[groups]] === Section groups [[groups.newGroupsVisibleToAll]]groups.newGroupsVisibleToAll:: + Controls whether newly created groups should be by default visible to all registered users. + By default, false. [[hooks]] === Section hooks See also link:config-hooks.html[Hooks]. [[hooks.path]]hooks.path:: + Optional path to hooks, if not specified then `'$site_path'/hooks` will be used. [[hooks.syncHookTimeout]]hooks.syncHookTimeout:: + Optional timeout value in seconds for synchronous hooks, if not specified then 30 seconds will be used. [[hooks.changeAbandonedHook]]hooks.changeAbandonedHook:: + Optional filename for the change abandoned hook, if not specified then `change-abandoned` will be used. [[hooks.changeMergedHook]]hooks.changeMergedHook:: + Optional filename for the change merged hook, if not specified then `change-merged` will be used. [[hooks.changeRestoredHook]]hooks.changeRestoredHook:: + Optional filename for the change restored hook, if not specified then `change-restored` will be used. [[hooks.claSignedHook]]hooks.claSignedHook:: + Optional filename for the CLA signed hook, if not specified then `cla-signed` will be used. [[hooks.commentAddedHook]]hooks.commentAddedHook:: + Optional filename for the comment added hook, if not specified then `comment-added` will be used. [[hooks.draftPublishedHook]]hooks.draftPublishedHook:: + Optional filename for the draft published hook, if not specified then `draft-published` will be used. [[hooks.hashtagsChangedHook]]hooks.hashtagsChangedHook:: + Optional filename for the hashtags changed hook, if not specified then `hashtags-changed` will be used. [[hooks.projectCreatedHook]]hooks.projectCreatedHook:: + Optional filename for the project created hook, if not specified then `project-created` will be used. [[hooks.mergeFailedHook]]hooks.mergeFailedHook:: + Optional filename for the merge failed hook, if not specified then `merge-failed` will be used. [[hooks.patchsetCreatedHook]]hooks.patchsetCreatedHook:: + Optional filename for the patchset created hook, if not specified then `patchset-created` will be used. [[hooks.refUpdateHook]]hooks.refUpdateHook:: + Optional filename for the ref update hook, if not specified then `ref-update` will be used. [[hooks.refUpdatedHook]]hooks.refUpdatedHook:: + Optional filename for the ref updated hook, if not specified then `ref-updated` will be used. [[hooks.reviewerAddedHook]]hooks.reviewerAddedHook:: + Optional filename for the reviewer added hook, if not specified then `reviewer-added` will be used. [[hooks.topicChangedHook]]hooks.topicChangedHook:: + Optional filename for the topic changed hook, if not specified then `topic-changed` will be used. [[http]] === Section http [[http.proxy]]http.proxy:: + URL of the proxy server when making outgoing HTTP connections for OpenID login transactions. Syntax should be `http://`'hostname'`:`'port'. [[http.proxyUsername]]http.proxyUsername:: + Optional username to authenticate to the HTTP proxy with. This property is honored only if the username does not appear in the http.proxy property above. [[http.proxyPassword]]http.proxyPassword:: + Optional password to authenticate to the HTTP proxy with. This property is honored only if the password does not appear in the http.proxy property above. [[http.addUserAsRequestAttribute]]http.addUserAsRequestAttribute:: + If true, 'User' attribute will be added to the request attributes so it can be accessed outside the request scope (will be set to username or id if username not configured). + This attribute can be used by the servlet container to log user in the http access log. + When running the embedded servlet container, this attribute is used to print user in the httpd_log. + * `%{User}r` + Pattern to print user in Tomcat AccessLog. + Default value is true. [[httpd]] === Section httpd The httpd section configures the embedded servlet container. [[httpd.listenUrl]]httpd.listenUrl:: + Specifies the URLs the internal HTTP daemon should listen for connections on. The special hostname '*' may be used to listen on all local addresses. A context path may optionally be included, placing Gerrit Code Review's web address within a subdirectory of the server. + Multiple protocol schemes are supported: + * `http://`'hostname'`:`'port' + Plain-text HTTP protocol. If port is not supplied, defaults to 80, the standard HTTP port. + * `https://`'hostname'`:`'port' + SSL encrypted HTTP protocol. If port is not supplied, defaults to 443, the standard HTTPS port. + Externally facing production sites are encouraged to use a reverse proxy configuration and `proxy-https://` (below), rather than using the embedded servlet container to implement the SSL processing. The proxy server with SSL support is probably easier to configure, provides more configuration options to control cipher usage, and is likely using natively compiled encryption algorithms, resulting in higher throughput. + * `proxy-http://`'hostname'`:`'port' + Plain-text HTTP relayed from a reverse proxy. If port is not supplied, defaults to 8080. + Like http, but additional header parsing features are enabled to honor X-Forwarded-For, X-Forwarded-Host and X-Forwarded-Server. These headers are typically set by Apache's link:http://httpd.apache.org/docs/2.2/mod/mod_proxy.html#x-headers[mod_proxy]. + * `proxy-https://`'hostname'`:`'port' + Plain text HTTP relayed from a reverse proxy that has already handled the SSL encryption/decryption. If port is not supplied, defaults to 8080. + Behaves exactly like proxy-http, but also sets the scheme to assume 'https://' is the proper URL back to the server. + -- If multiple values are supplied, the daemon will listen on all of them. By default, http://*:8080. -- [[httpd.reuseAddress]]httpd.reuseAddress:: + If true, permits the daemon to bind to the port even if the port is already in use. If false, the daemon ensures the port is not in use before starting. Busy sites may need to set this to true to permit fast restarts. + By default, true. [[httpd.requestHeaderSize]]httpd.requestHeaderSize:: + Size, in bytes, of the buffer used to parse the HTTP headers of an incoming HTTP request. The entire request headers, including any cookies sent by the browser, must fit within this buffer, otherwise the server aborts with the response '413 Request Entity Too Large'. + One buffer of this size is allocated per active connection. Allocating a buffer that is too large wastes memory that cannot be reclaimed, allocating a buffer that is too small may cause unexpected errors caused by very long Referer URLs or large cookie values. + By default, 16384 (16 K), which is sufficient for most OpenID and other web-based single-sign-on integrations. [[httpd.sslCrl]]httpd.sslCrl:: + Path of the certificate revocation list file in PEM format. This crl file is optional, and available for CLIENT_SSL_CERT_LDAP authentication. + To create and view a crl using openssl: + ---- openssl ca -gencrl -out crl.pem openssl crl -in crl.pem -text ---- + If not absolute, the path is resolved relative to `$site_path`. + By default, `$site_path/etc/crl.pem`. [[httpd.sslKeyStore]]httpd.sslKeyStore:: + Path of the Java keystore containing the server's SSL certificate and private key. This keystore is required for `https://` in URL. + To create a self-signed certificate for simple internal usage: + ---- keytool -keystore keystore -alias jetty -genkey -keyalg RSA chmod 600 keystore ---- + If not absolute, the path is resolved relative to `$site_path`. + By default, `$site_path/etc/keystore`. [[httpd.sslKeyPassword]]httpd.sslKeyPassword:: + Password used to decrypt the private portion of the sslKeyStore. Java keystores require a password, even if the administrator doesn't want to enable one. + If set to the empty string the embedded server will prompt for the password during startup. + By default, `gerrit`. [[httpd.requestLog]]httpd.requestLog:: + Enable (or disable) the `'$site_path'/logs/httpd_log` request log. If enabled, an NCSA combined log format request log file is written out by the internal HTTP daemon. + `log4j.appender` with the name `httpd_log` can be configured to overwrite programmatic configuration. + By default, true if httpd.listenUrl uses http:// or https://, and false if httpd.listenUrl uses proxy-http:// or proxy-https://. [[httpd.acceptorThreads]]httpd.acceptorThreads:: + Number of worker threads dedicated to accepting new incoming TCP connections and allocating them connection-specific resources. + By default, 2, which should be suitable for most high-traffic sites. [[httpd.minThreads]]httpd.minThreads:: + Minimum number of spare threads to keep in the worker thread pool. This number must be at least 1 larger than httpd.acceptorThreads multiplied by the number of httpd.listenUrls configured. + By default, 5, suitable for most lower-volume traffic sites. [[httpd.maxThreads]]httpd.maxThreads:: + Maximum number of threads to permit in the worker thread pool. + By default 25, suitable for most lower-volume traffic sites. [[httpd.maxQueued]]httpd.maxQueued:: + Maximum number of client connections which can enter the worker thread pool waiting for a worker thread to become available. 0 sets the queue size to the Integer.MAX_VALUE. + By default 200. [[httpd.maxWait]]httpd.maxWait:: + Maximum amount of time a client will wait for an available thread to handle a project clone, fetch or push request over the smart HTTP transport. + Values should use common unit suffixes to express their setting: + * s, sec, second, seconds * m, min, minute, minutes * h, hr, hour, hours * d, day, days * w, week, weeks (`1 week` is treated as `7 days`) * mon, month, months (`1 month` is treated as `30 days`) * y, year, years (`1 year` is treated as `365 days`) + -- If a unit suffix is not specified, `minutes` is assumed. If 0 is supplied, the maximum age is infinite and connections will not abort until the client disconnects. By default, 5 minutes. -- [[httpd.filterClass]]httpd.filterClass:: + Class that implements the javax.servlet.Filter interface for filtering any HTTP related traffic going through the Gerrit HTTP protocol. Class is loaded and configured in the Gerrit Jetty container and run in front of all Gerrit URL handlers, allowing the filter to inspect, modify, allow or reject each request. It needs to be provided as JAR library under $GERRIT_SITE/lib as it is resolved using the default Gerrit class loader and cannot be dynamically loaded by a plugin. + Failing to load the Filter class would result in a Gerrit start-up failure, as this class is supposed to provide mandatory filtering in front of Gerrit HTTP protocol. + Typical usage is in conjunction with the `auth.type=HTTP` as replacement of an Apache HTTP proxy layer as security enforcement on top of Gerrit by returning a trusted username as HTTP Header. + Example of using a security library secure.jar under $GERRIT_SITE/lib that provides a org.anyorg.MySecureFilter Servlet Filter that enforces a trusted username in the `TRUSTED_USER` HTTP Header: ---- [auth] type = HTTP httpHeader = TRUSTED_USER [httpd] filterClass = org.anyorg.MySecureFilter ---- [[httpd.robotsFile]]httpd.robotsFile:: + Location of an external robots.txt file to be used instead of the one bundled with the .war of the application. + If not absolute, the path is resolved relative to `$site_path`. + If the file doesn't exist or can't be read the default robots.txt file bundled with the .war will be used instead. [[httpd.registerMBeans]]httpd.registerMBeans:: + Enable (or disable) registration of Jetty MBeans for Java JMX. + By default, false. [[index]] === Section index The index section configures the secondary index. Note that after enabling the secondary index, the index must be built using the link:pgm-reindex.html[reindex program] before restarting the Gerrit server. [[index.type]]index.type:: + Type of secondary indexing employed by Gerrit. The supported values are: + * `LUCENE` + A link:http://lucene.apache.org/[Lucene] index is used. + + By default, `LUCENE`. [[index.threads]]index.threads:: + Number of threads to use for indexing in normal interactive operations. + Defaults to 1 if not set, or set to a negative value (unless link:#changeMerge.interactiveThreadPoolSize[changeMerge.interactiveThreadPoolSize] is iset). [[index.batchThreads]]index.batchThreads:: + Number of threads to use for indexing in background operations, such as online schema upgrades. + If not set or set to a negative value, defaults to the number of logical CPUs as returned by the JVM (unless link:#changeMerge.threadPoolSize[changeMerge.threadPoolSize] is set). [[index.onlineUpgrade]]index.onlineUpgrade:: + Whether to upgrade to new index schema versions while the server is running. This is recommended as it prevents additional downtime during Gerrit version upgrades (avoiding the need for an offline reindex step using Reindex), but can add additional server load during the upgrade. + If set to false, there is no way to upgrade the index schema to take advantage of new search features without restarting the server. + Defaults to true. [[index.maxLimit]]index.maxLimit:: + Maximum limit to allow for search queries. Requesting results above this limit will truncate the list (but will still set `_more_changes` on result lists). Set to 0 for no limit. + Defaults to no limit. [[index.maxPages]]index.maxPages:: + Maximum number of pages of search results to allow, as index implementations may have to scan through large numbers of skipped results when searching with an offset. Requesting results starting past this threshold times the requested limit will result in an error. Set to 0 for no limit. + Defaults to no limit. [[index.maxTerms]]index.maxTerms:: + Maximum number of leaf terms to allow in a query. Too-large queries may perform poorly, so setting this option causes query parsing to fail fast before attempting to send them to the secondary index. Set to 0 for no limit. + Defaults to 500. ==== Lucene configuration Open and closed changes are indexed in separate indexes named 'open' and 'closed' respectively. The following settings are only used when the index type is `LUCENE`. [[index.defaultMaxClauseCount]]index.defaultMaxClauseCount:: + Only used when the type is `LUCENE`. + Sets the maximum number of clauses permitted per BooleanQuery. + Defaults to 1024. [[index.name.ramBufferSize]]index.name.ramBufferSize:: + Determines the amount of RAM that may be used for buffering added documents and deletions before they are flushed to the index. See the link:http://lucene.apache.org/core/4_6_0/core/org/apache/lucene/index/LiveIndexWriterConfig.html#setRAMBufferSizeMB(double)[ Lucene documentation] for further details. + Defaults to 16M. [[index.name.maxBufferedDocs]]index.name.maxBufferedDocs:: + Determines the minimal number of documents required before the buffered in-memory documents are flushed to the index. Large values generally give faster indexing. See the link:http://lucene.apache.org/core/4_6_0/core/org/apache/lucene/index/LiveIndexWriterConfig.html#setMaxBufferedDocs(int)[ Lucene documentation] for further details. + Defaults to -1, meaning no maximum is set and the writer will flush according to RAM usage. [[index.name.commitWithin]]index.name.commitWithin:: + Determines the period at which changes are automatically committed to stable store on disk. This is a costly operation and may block additional index writes, so lower with caution. + If zero, changes are committed after every write. This is very costly but may be useful if offline reindexing is infeasible, or for development servers. + Values can be specified using standard time unit abbreviations (`ms`, `sec`, `min`, etc.). + If negative, `commitWithin` is disabled. Changes are flushed to disk when the in-memory buffer fills, but only committed and guaranteed to be synced to disk when the process finishes. + Defaults to 300000 ms (5 minutes). Sample Lucene index configuration: ---- [index] type = LUCENE defaultMaxClauseCount = 2048 [index "changes_open"] ramBufferSize = 60 m maxBufferedDocs = 3000 [index "changes_closed"] ramBufferSize = 20 m maxBufferedDocs = 500 ---- [[ldap]] === Section ldap LDAP integration is only enabled if `auth.type` is set to `HTTP_LDAP`, `LDAP` or `CLIENT_SSL_CERT_LDAP`. See above for a detailed description of the `auth.type` settings and their implications. An example LDAP configuration follows, and then discussion of the parameters introduced here. Suitable defaults for most parameters are automatically guessed based on the type of server detected during startup. The guessed defaults support both link:http://www.ietf.org/rfc/rfc2307.txt[RFC 2307] and Active Directory. ---- [ldap] server = ldap://ldap.example.com accountBase = ou=people,dc=example,dc=com accountPattern = (&(objectClass=person)(uid=${username})) accountFullName = displayName accountEmailAddress = mail groupBase = ou=groups,dc=example,dc=com groupMemberPattern = (&(objectClass=group)(member=${dn})) ---- [[ldap.server]]ldap.server:: + URL of the organization's LDAP server to query for user information and group membership from. Must be of the form `ldap://host` or `ldaps://host` to bind with either a plaintext or SSL connection. + If `auth.type` is `LDAP` this setting should use `ldaps://` to ensure the end user's plaintext password is transmitted only over an encrypted connection. [[ldap.sslVerify]]ldap.sslVerify:: + If false and ldap.server is an `ldaps://` style URL, Gerrit will not verify the server certificate when it connects to perform a query. + By default, true, requiring the certificate to be verified. [[ldap.groupsVisibleToAll]]ldap.groupsVisibleToAll:: + If true, LDAP groups are visible to all registered users. + By default, false, LDAP groups are visible only to administrators and group members. [[ldap.username]]ldap.username:: + _(Optional)_ Username to bind to the LDAP server with. If not set, an anonymous connection to the LDAP server is attempted. [[ldap.password]]ldap.password:: + _(Optional)_ Password for the user identified by `ldap.username`. If not set, an anonymous (or passwordless) connection to the LDAP server is attempted. [[ldap.referral]]ldap.referral:: + _(Optional)_ How an LDAP referral should be handled if it is encountered during directory traversal. Set to `follow` to automatically follow any referrals, or `ignore` to ignore the referrals. + By default, `ignore`. [[ldap.readTimeout]]ldap.readTimeout:: + _(Optional)_ The read timeout for an LDAP operation. The value is in the usual time-unit format like "1 s", "100 ms", etc... A timeout can be used to avoid blocking all of the SSH command start threads in case the LDAP server becomes slow. + By default there is no timeout and Gerrit will wait for the LDAP server to respond until the TCP connection times out. [[ldap.accountBase]]ldap.accountBase:: + Root of the tree containing all user accounts. This is typically of the form `ou=people,dc=example,dc=com`. [[ldap.accountScope]]ldap.accountScope:: + Scope of the search performed for accounts. Must be one of: + * `one`: Search only one level below accountBase, but not recursive * `sub` or `subtree`: Search recursively below accountBase * `base` or `object`: Search exactly accountBase; probably not desired + Default is `subtree` as many directories have several levels. [[ldap.accountPattern]]ldap.accountPattern:: + Query pattern to use when searching for a user account. This may be any valid LDAP query expression, including the standard `(&...)` and `(|...)` operators. If `auth.type` is `HTTP_LDAP` then the variable `${username}` is replaced with a parameter set to the username that was supplied by the HTTP server. If `auth.type` is `LDAP` then the variable `${username}` is replaced by the string entered by the end user. + This pattern is used to search the objects contained directly under the `ldap.accountBase` tree. A typical setting for this parameter is `(uid=${username})` or `(cn=${username})`, but the proper setting depends on the LDAP schema used by the directory server. + Default is `(uid=${username})` for RFC 2307 servers, and `(&(objectClass=user)(sAMAccountName=${username}))` for Active Directory. [[ldap.accountFullName]]ldap.accountFullName:: + _(Optional)_ Name of an attribute on the user account object which contains the initial value for the user's full name field in Gerrit. Typically this is the `displayName` property in LDAP, but could also be `legalName` or `cn`. + Attribute values may be concatenated with literal strings. For example to join given name and surname together, use the pattern `${givenName} ${SN}`. + If set, users will be unable to modify their full name field, as Gerrit will populate it only from the LDAP data. + Default is `displayName` for RFC 2307 servers, and `${givenName} ${sn}` for Active Directory. [[ldap.accountEmailAddress]]ldap.accountEmailAddress:: + _(Optional)_ Name of an attribute on the user account object which contains the user's Internet email address, as defined by this LDAP server. + Attribute values may be concatenated with literal strings, for example to set the email address to the lowercase form of sAMAccountName followed by a constant domain name, use `${sAMAccountName.toLowerCase}@example.com`. + If set, the preferred email address will be prefilled from LDAP, but users may still be able to register additional email addresses, and select a different preferred email address. + Default is `mail`. [[ldap.accountSshUserName]]ldap.accountSshUserName:: + _(Optional)_ Name of an attribute on the user account object which contains the initial value for the user's SSH username field in Gerrit. Typically this is the `uid` property in LDAP, but could also be `cn`. Administrators should prefer to match the attribute corresponding to the user's workstation username, as this is what SSH clients will default to. + Attribute values may also be forced to lowercase, or to uppercase in an expression. For example, `${sAMAccountName.toLowerCase}` will force the value of sAMAccountName, if defined, to be all lowercase. The suffix `.toUpperCase` can be used for the other direction. The suffix `.localPart` can be used to split attribute values of the form 'user@example.com' and return only the left hand side, for example `${userPrincipalName.localPart}` would provide only 'user'. + If set, users will be unable to modify their SSH username field, as Gerrit will populate it only from the LDAP data. + Default is `uid` for RFC 2307 servers, and `${sAMAccountName.toLowerCase}` for Active Directory. [[ldap.accountMemberField]]ldap.accountMemberField:: + _(Optional)_ Name of an attribute on the user account object which contains the groups the user is part of. Typically used for Active Directory servers. + Default is unset for RFC 2307 servers (disabled) and `memberOf` for Active Directory. [[ldap.fetchMemberOfEagerly]]ldap.fetchMemberOfEagerly:: + _(Optional)_ Whether to fetch the `memberOf` account attribute on login. Setups which use LDAP for user authentication but don't make use of the LDAP groups may benefit from setting this option to `false` as this will result in a much faster LDAP login. + Default is unset for RFC 2307 servers (disabled) and `true` for Active Directory. [[ldap.groupBase]]ldap.groupBase:: + Root of the tree containing all group objects. This is typically of the form `ou=groups,dc=example,dc=com`. [[ldap.groupScope]]ldap.groupScope:: + Scope of the search performed for group objects. Must be one of: + * `one`: Search only one level below groupBase, but not recursive * `sub` or `subtree`: Search recursively below groupBase * `base` or `object`: Search exactly groupBase; probably not desired + Default is `subtree` as many directories have several levels. [[ldap.groupPattern]]ldap.groupPattern:: + Query pattern used when searching for an LDAP group to connect to a Gerrit group. This may be any valid LDAP query expression, including the standard `(&...)` and `(|...)` operators. The variable `${groupname}` is replaced with the search term supplied by the group owner. + Default is `(cn=${groupname})` for RFC 2307, and `(&(objectClass=group)(cn=${groupname}))` for Active Directory. [[ldap.groupMemberPattern]]ldap.groupMemberPattern:: + Query pattern to use when searching for the groups that a user account is currently a member of. This may be any valid LDAP query expression, including the standard `(&...)` and `(|...)` operators. + If `auth.type` is `HTTP_LDAP` then the variable `${username}` is replaced with a parameter set to the username that was supplied by the HTTP server. Other variables appearing in the pattern, such as `${fooBarAttribute}`, are replaced with the value of the corresponding attribute (in this case, `fooBarAttribute`) as read from the user's account object matched under `ldap.accountBase`. Attributes such as `${dn}` or `${uidNumber}` may be useful. + Default is `(|(memberUid=${username})(gidNumber=${gidNumber}))` for RFC 2307, and unset (disabled) for Active Directory. [[ldap.groupName]]ldap.groupName:: + _(Optional)_ Name of the attribute on the group object which contains the value to use as the group name in Gerrit. + Typically the attribute name is `cn` for RFC 2307 and Active Directory servers. For other servers the attribute name may differ, for example `apple-group-realname` on Apple MacOS X Server. + It is also possible to specify a literal string containing a pattern of attribute values. For example to create a Gerrit group name consisting of LDAP group name and group ID, use the pattern `${cn} (${gidNumber})`. + Default is `cn`. [[ldap.localUsernameToLowerCase]]ldap.localUsernameToLowerCase:: + Converts the local username, that is used to login into the Gerrit Web UI, to lower case before doing the LDAP authentication. By setting this parameter to true, a case insensitive login to the Gerrit Web UI can be achieved. + If set, it must be ensured that the local usernames for all existing accounts are converted to lower case, otherwise a user that has a local username that contains upper case characters will not be able to login anymore. The local usernames for the existing accounts can be converted to lower case by running the server program link:pgm-LocalUsernamesToLowerCase.html[LocalUsernamesToLowerCase]. Please be aware that the conversion of the local usernames to lower case can't be undone. For newly created accounts the local username will be directly stored in lower case. + By default, unset/false. [[ldap.authentication]]ldap.authentication:: + Defines how Gerrit authenticates with the server. When set to `GSSAPI` Gerrit will use Kerberos. To use kerberos the `java.security.auth.login.config` system property must point to a login to a JAAS configuration file and, if Java 6 is used, the system property `java.security.krb5.conf` must point to the appropriate krb5.ini file with references to the KDC. Typical jaas.conf. ---- KerberosLogin { com.sun.security.auth.module.Krb5LoginModule required useTicketCache=true doNotPrompt=true renewTGT=true; }; ---- See Java documentation on how to create the krb5.ini file. Note the `renewTGT` property to make sure the TGT does not expire, and `useTicketCache` to use the TGT supplied by the operating system. As the whole point of using GSSAPI is to have passwordless authentication to the LDAP service, this option does not acquire a new TGT on its own. On Windows servers the registry key `HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa\Kerberos\Parameters` must have the DWORD value `allowtgtsessionkey` set to 1 and the account must not have local administrator privileges. [[ldap.useConnectionPooling]]ldap.useConnectionPooling:: + _(Optional)_ Enable the LDAP connection pooling or not. + If it is true, the LDAP service provider maintains a pool of (possibly) previously used connections and assigns them to a Context instance as needed. When a Context instance is done with a connection (closed or garbage collected), the connection is returned to the pool for future use. + For details, see link:http://docs.oracle.com/javase/tutorial/jndi/ldap/pool.html[ LDAP connection management (Pool)] and link:http://docs.oracle.com/javase/tutorial/jndi/ldap/config.html[ LDAP connection management (Configuration)] + By default, false. [[ldap.connectTimeout]]ldap.connectTimeout:: + _(Optional)_ Timeout period for establishment of an LDAP connection. + The value is in the usual time-unit format like "1 s", "100 ms", etc... + By default there is no timeout and Gerrit will wait indefinitely. [[ldap-connection-pooling]] ==== LDAP Connection Pooling Once LDAP connection pooling is enabled by setting the link:#ldap.useConnectionPooling[ ldap.useConnectionPooling] configuration property to `true`, the connection pool can be configured using JVM system properties as explained in the link:http://docs.oracle.com/javase/7/docs/technotes/guides/jndi/jndi-ldap.html#POOL[ Java SE Documentation]. For standalone Gerrit (running with the embedded Jetty), JVM system properties are specified in the link:#container[container section]: ---- javaOptions = -Dcom.sun.jndi.ldap.connect.pool.maxsize=20 javaOptions = -Dcom.sun.jndi.ldap.connect.pool.prefsize=10 javaOptions = -Dcom.sun.jndi.ldap.connect.pool.timeout=300000 ---- [[log]] === Section log [[log.jsonLogging]]log.jsonLogging:: + If set to true, enables error logging in JSON format (file name: "logs/error_log.json"). + Defaults to false. [[log.textLogging]]log.textLogging:: + If set to true, enables error logging in regular plain text format. Can only be disabled if `jsonLogging` is enabled. + Defaults to true. [[mimetype]] === Section mimetype [[mimetype.name.safe]]mimetype..safe:: + If set to true, files with the MIME type `` will be sent as direct downloads to the user's browser, rather than being wrapped up inside of zipped archives. The type name may be a complete type name, e.g. `image/gif`, a generic media type, e.g. `+image/*+`, or the wildcard `+*/*+` to match all types. + By default, false for all MIME types. Common examples: ---- [mimetype "image/*"] safe = true [mimetype "application/pdf"] safe = true [mimetype "application/msword"] safe = true [mimetype "application/vnd.ms-excel"] safe = true ---- [[pack]] === Section pack Global settings controlling how Gerrit Code Review creates pack streams for Git clients running clone, fetch, or pull. Most of these variables are per-client request, and thus should be carefully set given the expected concurrent request load and available CPU and memory resources. [[pack.deltacompression]]pack.deltacompression:: + If true, delta compression between objects is enabled. This may result in a smaller overall transfer for the client, but requires more server memory and CPU time. + False (off) by default, matching Gerrit Code Review 2.1.4. [[pack.threads]]pack.threads:: + Maximum number of threads to use for delta compression (if enabled). This is per-client request. If set to 0 then the number of CPUs is auto-detected and one thread per CPU is used, per client request. + By default, 1. [[plugins]] === Section plugins [[plugins.checkFrequency]]plugins.checkFrequency:: + How often plugins should be examined for new plugins to load, removed plugins to be unloaded, or updated plugins to be reloaded. Values can be specified using standard time unit abbreviations ('ms', 'sec', 'min', etc.). + If set to 0, automatic plugin reloading is disabled. Administrators may force reloading with link:cmd-plugin-reload.html[gerrit plugin reload]. + Default is 1 minute. [[plugins.allowRemoteAdmin]]plugins.allowRemoteAdmin:: + Enable remote installation, enable and disable of plugins over HTTP and SSH. If set to true Administrators can install new plugins remotely, or disable existing plugins. Defaults to false. [[plugins.jsLoadTimeout]]plugins.jsLoadTimeout:: + Set the timeout value for loading JavaScript plugins in Gerrit UI. Values can be specified using standard time unit abbreviations ('ms', 'sec', 'min', etc.). + Default is 5 seconds. Negative values will be converted to 0. [[receive]] === Section receive This section is used to configure behavior of the 'receive-pack' handler, which responds to 'git push' requests. [[receive.allowGroup]]receive.allowGroup:: + Name of the groups of users that are allowed to execute 'receive-pack' on the server. One or more groups can be set. + If no groups are added, any user will be allowed to execute 'receive-pack' on the server. [[receive.certNonceSeed]]receive.certNonceSeed:: + If set to a non-empty value and server-side signed push validation is link:#receive.enableSignedPush[enabled], use this value as the seed to the HMAC SHA-1 nonce generator. If unset, a 64-byte random seed will be generated at server startup. + As this is used as the seed of a cryptographic algorithm, it is recommended to be placed in link:#secure-config[`secure.config`]. + Defaults to unset. [[receive.certNonceSlop]]receive.certNonceSlop:: + When validating the nonce passed as part of the signed push protocol, accept valid nonces up to this many seconds old. This allows certificate verification to work over HTTP where there is a lag between the HTTP response providing the nonce to sign and the next request containing the signed nonce. This can be significant on large repositories, since the lag also includes the time to count objects on the client. + Default is 5 minutes. [[receive.changeUpdateThreads]]receive.changeUpdateThreads:: + Number of threads to perform change creation or patch set updates concurrently. Each thread uses its own database connection from the database connection pool, and if all threads are busy then main receive thread will also perform a change creation or patch set update. + Defaults to 1, using only the main receive thread. This feature is for databases with very high latency that can benefit from concurrent operations when multiple changes are impacted at once. [[receive.checkMagicRefs]]receive.checkMagicRefs:: + If true, Gerrit will verify the destination repository has no references under the magic 'refs/drafts', 'refs/for', or 'refs/publish' branch namespaces. Names under these locations confuse clients when trying to upload code reviews so Gerrit requires them to be empty. + If false Gerrit skips the sanity check and assumes administrators have ensured the repository does not contain any magic references. Setting to false to skip the check can decrease latency during push. + Default is true. [[receive.checkReferencedObjectsAreReachable]]receive.checkReferencedObjectsAreReachable:: + If set to true, Gerrit will validate that all referenced objects that are not included in the received pack are reachable by the user. + Carrying out this check on gits with many refs and commits can be a very CPU-heavy operation. For non public Gerrit-servers this check may be overkill. + Only disable this check if you trust the clients not to forge SHA1 references to access commits intended to be hidden from the user. + Default is true. [[receive.enableSignedPush]]receive.enableSignedPush:: + If true, server-side signed push validation is enabled. + When a client pushes with `git push --signed`, this ensures that the push certificate is valid and signed with a valid public key stored in the `refs/gpg-keys` branch of `All-Users`. + Defaults to false. [[receive.maxBatchChanges]]receive.maxBatchChanges:: + The maximum number of changes that Gerrit allows to be pushed in a batch for review. When this number is exceeded Gerrit rejects the push with an error message. + May be overridden for certain groups by specifying a limit in the link:access-control.html#capability_batchChangesLimit['Batch Changes Limit'] global capability. + This setting can be used to prevent users from uploading large number of changes for review by mistake. + Default is zero, no limit. [[receive.maxObjectSizeLimit]]receive.maxObjectSizeLimit:: + Maximum allowed Git object size that 'receive-pack' will accept. If an object is larger than the given size the pack-parsing will abort and the push operation will fail. If set to zero then there is no limit. + Gerrit administrators can use this setting to prevent developers from pushing objects which are too large to Gerrit. + This setting can also be set in the `project.config` link:config-project-config.html[receive.maxObjectSizeLimit] in order to further reduce the global setting. The project specific setting is only honored when it further reduces the global limit. + Default is zero. + Common unit suffixes of 'k', 'm', or 'g' are supported. [[receive.maxTrustDepth]]receive.maxTrustDepth:: + If signed push validation is link:#receive.enableSignedPush[enabled], set to the maximum depth to search when checking if a key is link:#receive.trustedKey[trusted]. + Default is 0, meaning only explicitly trusted keys are allowed. [[receive.threadPoolSize]]receive.threadPoolSize:: + Maximum size of the thread pool in which the change data in received packs is processed. + Defaults to the number of available CPUs according to the Java runtime. [[receive.timeout]]receive.timeout:: + Overall timeout on the time taken to process the change data in received packs. Only includes the time processing Gerrit changes and updating references, not the time to index the pack. Values can be specified using standard time unit abbreviations ('ms', 'sec', 'min', etc.). + Default is 4 minutes. If no unit is specified, milliseconds is assumed. [[receive.trustedKey]]receive.trustedKey:: + List of GPG key fingerprints that should be considered trust roots by the server when signed push validation is link:#receive.enableSignedPush[enabled]. A key is trusted by the server if it is either in this list, or a path of trust signatures leads from the key to a configured trust root. The maximum length of the path is determined by link:#receive.maxTrustDepth[`receive.maxTrustDepth`]. + Key fingerprints can be displayed with `gpg --list-keys --with-fingerprint`. + Trust signatures can be added to a key using the `tsign` command to link:https://www.gnupg.org/documentation/manuals/gnupg/OpenPGP-Key-Management.html[ `gpg --edit-key`], after which the signed key should be re-uploaded. + If no keys are specified, web-of-trust checks are disabled. This is the default behavior. [[repository]] === Section repository Repositories in this sense are the same as projects. In the following example configuration `Registered Users` is set to be the default owner of new projects. ---- [repository "*"] ownerGroup = Registered Users ---- The only matching patterns supported are exact match or wildcard matching which can be specified by ending the name with a `*`. If a project matches more than one repository configuration, then the configuration from the more precise match will be used. In the following example, the default submit type for a project named `project/plugins/a` would be `CHERRY_PICK`. ---- [repository "project/*"] defaultSubmitType = MERGE_IF_NECESSARY [repository "project/plugins/*"] defaultSubmitType = CHERRY_PICK ---- [NOTE] All properties are used from the matching repository configuration. In the previous example, all properties will be used from `project/plugins/\*` section and no properties will be inherited nor overridden from `project/*`. [[repository.name.defaultSubmitType]]repository..defaultSubmitType:: + The default submit type for newly created projects. Supported values are `MERGE_IF_NECESSARY`, `FAST_FORWARD_ONLY`, `REBASE_IF_NECESSARY`, `MERGE_ALWAYS` and `CHERRY_PICK`. + By default, `MERGE_IF_NECESSARY`. [[repository.name.ownerGroup]]repository..ownerGroup:: + A name of a group which exists in the database. Zero, one or many groups are allowed. Each on its own line. Groups which don't exist in the database are ignored. [[rules]] === Section rules [[rules.enable]]rules.enable:: + If true, Gerrit will load and execute 'rules.pl' files in each project's refs/meta/config branch, if present. When set to false, only the default internal rules will be used. + Default is true, to execute project specific rules. [[rules.reductionLimit]]rules.reductionLimit:: + Maximum number of Prolog reductions that can be performed when evaluating rules for a single change. Each function call made in user rule code, internal Gerrit Prolog code, or the Prolog interpreter counts against this limit. + Sites using very complex rules that need many reductions should compile Prolog to Java bytecode with link:pgm-rulec.html[rulec]. This eliminates the dynamic Prolog interpreter from charging its own reductions against the limit, enabling more logic to execute within the same bounds. + A reductionLimit of 0 is nearly infinite, implemented by setting the internal limit to 2^31-1. + Default is 100,000 reductions (about 14 ms on Intel Core i7 CPU). [[rules.compileReductionLimit]]rules.compileReductionLimit:: + Maximum number of Prolog reductions that can be performed when compiling source code to internal Prolog machine code. + Default is 10x reductionLimit (1,000,000). [[execution]] === Section execution [[execution.defaultThreadPoolSize]]execution.defaultThreadPoolSize:: + The default size of the background execution thread pool in which miscellaneous tasks are handled. + Default is 1. [[sendemail]] === Section sendemail [[sendemail.enable]]sendemail.enable:: + If false Gerrit will not send email messages, for any reason, and all other properties of section sendemail are ignored. + By default, true, allowing notifications to be sent. [[sendemail.allowRegisterNewEmail]]sendemail.allowRegisterNewEmail:: + Whether users are allowed to register new email addresses. + In addition for the HTTP authentication type link:#auth.httpemailheader[auth.httpemailheader] must *not* be set to enable registration of new email addresses. + By default, true. [[sendemail.connectTimeout]]sendemail.connectTimeout:: + The connection timeout of opening a socket connected to a remote SMTP server. + Values can be specified using standard time unit abbreviations ('ms', 'sec', 'min', etc.). If no unit is specified, milliseconds is assumed. + Default is 0. A timeout of zero is interpreted as an infinite timeout. The connection will then block until established or an error occurs. [[sendemail.threadPoolSize]]sendemail.threadPoolSize:: + Maximum size of thread pool in which the review comments notifications are sent out asynchronously. + By default, 1. [[sendemail.from]]sendemail.from:: + Designates what name and address Gerrit will place in the From field of any generated email messages. The supported values are: + * `USER` + Gerrit will set the From header to use the current user's Full Name and Preferred Email. This may cause messages to be classified as spam if the user's domain has SPF or DKIM enabled and <> is not a trusted relay for that domain. + * `MIXED` + Shorthand for `${user} (Code Review) ` where `review@example.com` is the same as <>. See below for a description of how the replacement is handled. + * `SERVER` + Gerrit will set the From header to the same name and address it records in any commits Gerrit creates. This is set by <> and <>, or guessed from the local operating system. + * `Code Review ` + If set to a name and email address in brackets, Gerrit will use this name and email address for any messages, overriding the name that may have been selected for commits by user.name and user.email. Optionally, the name portion may contain the placeholder `${user}`, which is replaced by the Full Name of the current user. + By default, MIXED. [[sendemail.smtpServer]]sendemail.smtpServer:: + Hostname (or IP address) of a SMTP server that will relay messages generated by Gerrit to end users. + By default, 127.0.0.1 (aka localhost). [[sendemail.smtpServerPort]]sendemail.smtpServerPort:: + Port number of the SMTP server in sendemail.smtpserver. + By default, 25, or 465 if smtpEncryption is 'ssl'. [[sendemail.smtpEncryption]]sendemail.smtpEncryption:: + Specify the encryption to use, either 'ssl' or 'tls'. + By default, 'none', indicating no encryption is used. [[sendemail.sslVerify]]sendemail.sslVerify:: + If false and sendemail.smtpEncryption is 'ssl' or 'tls', Gerrit will not verify the server certificate when it connects to send an email message. + By default, true, requiring the certificate to be verified. [[sendemail.smtpUser]]sendemail.smtpUser:: + User name to authenticate with, if required for relay. [[sendemail.smtpPass]]sendemail.smtpPass:: + Password for the account named by sendemail.smtpUser. [[sendemail.allowrcpt]]sendemail.allowrcpt:: + If present, each value adds one entry to the whitelist of email addresses that Gerrit can send email to. If set to a complete email address, that one address is added to the white list. If set to a domain name, any address at that domain can receive email from Gerrit. + By default, unset, permitting delivery to any email address. [[sendemail.includeDiff]]sendemail.includeDiff:: + If true, new change emails and merged change emails from Gerrit will include the complete unified diff of the change. Variable maxmimumDiffSize places an upper limit on how large the email can get when this option is enabled. + By default, false. [[sendemail.maximumDiffSize]]sendemail.maximumDiffSize:: + Largest size of unified diff output to include in an email. When the diff exceeds this size the file paths will be listed instead. Standard byte unit suffixes are supported. + By default, 256 KiB. [[sendemail.importance]]sendemail.importance:: + If present, emails sent from Gerrit will have the given level of importance. Valid values include 'high' and 'low', which email clients will render in different ways. + By default, unset, so no Importance header is generated. [[sendemail.expiryDays]]sendemail.expiryDays:: + If present, emails sent from Gerrit will expire after the given number of days. This will add the Expiry-Date header and email clients may expire or expunge mails whose Expiry-Date header is in the past. This should be a positive non-zero number indicating how many days in the future the mails should expire. + By default, unset, so no Expiry-Date header is generated. [[site]] === Section site [[site.refreshHeaderFooter]]site.refreshHeaderFooter:: + If true the server checks the site header, footer and CSS files for updated versions. If false, a server restart is required to change any of these resources. Default is true, allowing automatic reloads. [[ssh-alias]] === Section ssh-alias Variables in section ssh-alias permit the site administrator to alias another command from Gerrit or a plugin into the `gerrit` command namespace. To alias `replication start` to `gerrit replicate`: ---- [ssh-alias] replicate = replication start ---- [[sshd]] === Section sshd [[sshd.enableCompression]]sshd.enableCompression:: + In the general case, we want to disable transparent compression, since the majority of our data transfer is highly compressed Git pack files and we cannot make them any smaller than they already are. + However, if there are CPU in abundance and the server is reachable through slow networks, gits with huge amount of refs can benefit from SSH-compression since git does not compress the ref announcement during handshake. + Compression can be especially useful when Gerrit slaves are being used for the larger clones and fetches and the master server mostly takes small receive-packs. + By default, `false`. [[sshd.backend]]sshd.backend:: + Starting from version 0.9.0 Apache SSHD project added support for NIO2 IoSession. To use the new NIO2 session the `backend` option must be set to `NIO2`. + By default, `MINA`. [[sshd.listenAddress]]sshd.listenAddress:: + Specifies the local addresses the internal SSHD should listen for connections on. The following forms may be used to specify an address. In any form, `:'port'` may be omitted to use the default of 29418. + * 'hostname':'port' (for example `review.example.com:29418`) * 'IPv4':'port' (for example `10.0.0.1:29418`) * ['IPv6']:'port' (for example `[ff02::1]:29418`) * +*:'port'+ (for example `+*:29418+`) + -- If multiple values are supplied, the daemon will listen on all of them. To disable the internal SSHD, set listenAddress to `off`. By default, *:29418. -- [[sshd.advertisedAddress]]sshd.advertisedAddress:: + Specifies the addresses clients should be told to connect to. This may differ from sshd.listenAddress if a firewall based port redirector is being used, making Gerrit appear to answer on port 22. The following forms may be used to specify an address. In any form, `:'port'` may be omitted to use the default SSH port of 22. * 'hostname':'port' (for example `review.example.com:22`) * 'IPv4':'port' (for example `10.0.0.1:29418`) * ['IPv6']:'port' (for example `[ff02::1]:29418`) + -- If multiple values are supplied, the daemon will advertise all of them. By default, sshd.listenAddress. -- [[sshd.tcpKeepAlive]]sshd.tcpKeepAlive:: + If true, enables TCP keepalive messages to the other side, so the daemon can terminate connections if the peer disappears. + Only effective when `sshd.backend` is set to `MINA`. + By default, true. [[sshd.threads]]sshd.threads:: + Number of threads to use when executing SSH command requests. If additional requests are received while all threads are busy they are queued and serviced in a first-come-first-served order. + By default, 1.5x the number of CPUs available to the JVM. [[sshd.batchThreads]]sshd.batchThreads:: + Number of threads to allocate for SSH command requests from link:access-control.html#non-interactive_users[non-interactive users]. If equals to 0, then all non-interactive requests are executed in the same queue as interactive requests. + Any other value will remove the number of threads from the queue allocated to interactive users, and create a separate thread pool of the requested size, which will be used to run commands from non-interactive users. + If the number of threads requested for non-interactive users is larger than the total number of threads allocated in sshd.threads, then the value of sshd.threads is increased to accommodate the requested value. + By default is 1 on single core node, 2 otherwise. [[sshd.streamThreads]]sshd.streamThreads:: + Number of threads to use when formatting events to asynchronous streaming clients. Event formatting is multiplexed onto this thread pool by a simple FIFO scheduling system. + By default, 1 plus the number of CPUs available to the JVM. [[sshd.commandStartThreads]]sshd.commandStartThreads:: + Number of threads used to parse a command line submitted by a client over SSH for execution, create the internal data structures used by that command, and schedule it for execution on another thread. + By default, 2. [[sshd.maxAuthTries]]sshd.maxAuthTries:: + Maximum number of authentication attempts before the server disconnects the client. Each public key that a client has loaded into its local agent counts as one auth request. Users can work around the server's limit by loading less keys into their agent, or selecting a specific key in their `~/.ssh/config` file with the `IdentityFile` option. + By default, 6. [[sshd.loginGraceTime]]sshd.loginGraceTime:: + Time in seconds that a client has to authenticate before the server automatically terminates their connection. Values should use common unit suffixes to express their setting: + * s, sec, second, seconds * m, min, minute, minutes * h, hr, hour, hours * d, day, days + By default, 2 minutes. [[sshd.idleTimeout]]sshd.idleTimeout:: + Time in seconds after which the server automatically terminates idle connections (or 0 to disable closing of idle connections). Values should use common unit suffixes to express their setting: + * s, sec, second, seconds * m, min, minute, minutes * h, hr, hour, hours * d, day, days + By default, 0. [[sshd.maxConnectionsPerUser]]sshd.maxConnectionsPerUser:: + Maximum number of concurrent SSH sessions that a user account may open at one time. This is the number of distinct SSH logins that each user may have active at one time, and is not related to the number of commands a user may issue over a single connection. If set to 0, there is no limit. + By default, 64. [[sshd.cipher]]sshd.cipher:: + Available ciphers. To permit multiple ciphers, specify multiple `sshd.cipher` keys in the configuration file, one cipher name per key. Cipher names starting with `+` are enabled in addition to the default ciphers, cipher names starting with `-` are removed from the default cipher set. + Supported ciphers: aes128-cbc, aes128-cbc, aes256-cbc, blowfish-cbc, 3des-cbc, none. + By default, all supported ciphers except `none` are available. [[sshd.mac]]sshd.mac:: + Available MAC (message authentication code) algorithms. To permit multiple algorithms, specify multiple `sshd.mac` keys in the configuration file, one MAC per key. MAC names starting with `+` are enabled in addition to the default MACs, MAC names starting with `-` are removed from the default MACs. + Supported MACs: hmac-md5, hmac-md5-96, hmac-sha1, hmac-sha1-96, hmac-sha2-256, hmac-sha2-512. + By default, all supported MACs are available. [[sshd.kerberosKeytab]]sshd.kerberosKeytab:: + Enable kerberos authentication for SSH connections. To permit kerberos authentication, the server must have a host principal (see `sshd.kerberosPrincipal`) which is acquired from a keytab. This must be provisioned by the kerberos administrators, and is typically installed into `/etc/krb5.keytab` on host machines. + The keytab must contain at least one `host/` principal, typically using the host's canonical name. If it does not use the canonical name, the `sshd.kerberosPrincipal` should be configured with the correct name. + By default, not set and so kerberos authentication is not enabled. [[sshd.kerberosPrincipal]]sshd.kerberosPrincipal:: + If kerberos authentication is enabled with `sshd.kerberosKeytab`, instead use the given principal name instead of the default. If the principal does not begin with `host/` a warning message is printed and may prevent successful authentication. + This may be useful if the host is behind an IP load balancer or other SSH forwarding systems, since the principal name is constructed by the client and must match for kerberos authentication to work. + By default, `host/canonical.host.name` [[sshd.requestLog]]sshd.requestLog:: + Enable (or disable) the `'$site_path'/logs/sshd_log` request log. If enabled, a request log file is written out by the SSH daemon. + `log4j.appender` with the name `sshd_log` can be configured to overwrite programmatic configuration. + By default, true. [[sshd.rekeyBytesLimit]]sshd.rekeyBytesLimit:: + The SSH daemon will issue a rekeying after a certain amount of data. This configuration option allows you to tweak that setting. + By default, 1073741824 (bytes, 1GB). + The rekeyBytesLimit cannot be set to lower than 32. [[sshd.rekeyTimeLimit]]sshd.rekeyTimeLimit:: + The SSH daemon will issue a rekeying after a certain amount of time. This configuration option allows you to tweak that setting. + By default, 1h. + Set to 0 to disable this check. [[suggest]] === Section suggest [[suggest.accounts]]suggest.accounts:: + If `true`, visible user accounts (according to the value of `accounts.visibility`) will be offered as completion suggestions when adding a reviewer to a change, or a user to a group. + If `false`, account suggestion is disabled. + Older configurations may also have one of the `accounts.visibility` values for this field, including `OFF` as a synonym for `NONE`. If `accounts.visibility` is also set, that value overrides this one; otherwise, this value applies to both `suggest.accounts` and `accounts.visibility`. + New configurations should prefer the boolean value for this field and an enum value for `accounts.visibility`. [[suggest.maxSuggestedReviewers]]suggest.maxSuggestedReviewers:: + The maximum numbers of reviewers suggested. + By default 10. [[suggest.fullTextSearch]]suggest.fullTextSearch:: + If `true` the reviewer completion suggestions will be based on a full text search. + By default `false`. [[suggest.from]]suggest.from:: + The number of characters that a user must have typed before suggestions are provided. If set to 0, suggestions are always provided. + By default 0. [[suggest.fullTextSearchMaxMatches]]suggest.fullTextSearchMaxMatches:: + The maximum number of matches evaluated for change access when using full text search. + By default 100. [[suggest.fullTextSearchRefresh]]suggest.fullTextSearchRefresh:: + Refresh interval for the in-memory account search index. + By default 1 hour. [[theme]] === Section theme [[theme.backgroundColor]]theme.backgroundColor:: + Background color for the page, and major data tables like the all open changes table or the account dashboard. The value must be a valid HTML hex color code, or standard color name. + By default white, `FFFFFF`. [[theme.topMenuColor]]theme.topMenuColor:: + This is the color of the main menu bar at the top of the page. The value must be a valid HTML hex color code, or standard color name. + By default white, `FFFFFF`. [[theme.textColor]]theme.textColor:: + Text color for the page, and major data tables like the all open changes table or the account dashboard. The value must be a valid HTML hex color code, or standard color name. + By default dark grey, `353535`. [[theme.trimColor]]theme.trimColor:: + Primary color used as a background color behind text. This is the color of the main menu bar at the top, of table headers, and of major UI areas that we want to offset from other portions of the page. The value must be a valid HTML hex color code, or standard color name. + By default a light grey, `EEEEEE`. [[theme.selectionColor]]theme.selectionColor:: + Background color used within a trimColor area to denote the currently selected tab, or the background color used in a table to denote the currently selected row. The value must be a valid HTML hex color code, or standard color name. + By default a pale blue, `D8EDF9`. [[theme.changeTableOutdatedColor]]theme.changeTableOutdatedColor:: + Background color used for patch outdated messages. The value must be a valid HTML hex color code, or standard color name. + By default a shade of red, `F08080`. [[theme.tableOddRowColor]]theme.tableOddRowColor:: + Background color for tables such as lists of open reviews for odd rows. This is so you can have a different color for odd and even rows of the table. The value must be a valid HTML hex color code, or standard color name. + By default transparent. [[theme.tableEvenRowColor]]theme.tableEvenRowColor:: + Background color for tables such as lists of open reviews for even rows. This is so you can have a different color for odd and even rows of the table. The value must be a valid HTML hex color code, or standard color name. + By default transparent. A different theme may be used for signed-in vs. signed-out user status by using the "signed-in" and "signed-out" theme sections. Variables not specified in a section are inherited from the default theme. ---- [theme] backgroundColor = FFFFFF [theme "signed-in"] backgroundColor = C0C0C0 [theme "signed-out"] backgroundColor = 00FFFF ---- As example, here is the theme configuration to have the old green look: ---- [theme] backgroundColor = FCFEEF textColor = 000000 trimColor = D4E9A9 selectionColor = FFFFCC topMenuColor = D4E9A9 changeTableOutdatedColor = F08080 [theme "signed-in"] backgroundColor = FFFFFF ---- [[trackingid]] === Section trackingid Tagged footer lines containing references to external tracking systems, parsed out of the commit message and saved in Gerrit's secondary index. After making changes to this section, existing changes must be reindexed with link:pgm-reindex.html[reindex]. The tracking ids are searchable using tr: or bug:. ---- [trackingid "jira-bug"] footer = Bugfix: footer = Bug: match = JRA\\d{2,8} system = JIRA [trackingid "jira-feature"] footer = Feature match = JRA(\\d{2,8}) system = JIRA ---- [[trackingid.name.footer]]trackingid..footer:: + A prefix tag that identifies the footer line to parse for tracking ids. + Several trackingid entries can have the same footer tag, and a single trackingid entry can have multiple footer tags. + If multiple footer tags are specified, each tag will be parsed separately and duplicates will be ignored. + The trailing ":" is optional. [[trackingid.name.match]]trackingid..match:: + A link:http://download.oracle.com/javase/6/docs/api/java/util/regex/Pattern.html[standard Java regular expression (java.util.regex)] used to match the external tracking id part of the footer line. The match can result in several entries in the DB. If grouping is used in the regex the first group will be interpreted as the tracking id. Tracking ids longer than 32 characters will be ignored. + The configuration file parser eats one level of backslashes, so the character class `\s` requires `\\s` in the configuration file. The parser also terminates the line at the first `#`, so a match expression containing # must be wrapped in double quotes. [[trackingid.name.system]]trackingid..system:: + The name of the external tracking system (maximum 10 characters). It is possible to have several trackingid entries for the same tracking system. [[transfer]] === Section transfer [[transfer.timeout]]transfer.timeout:: + Number of seconds to wait for a single network read or write to complete before giving up and declaring the remote side is not responding. If 0, there is no timeout, and this server will wait indefinitely for a transfer to finish. + A timeout should be large enough to mostly transfer the objects to the other side. 1 second may be too small for larger projects, especially over a WAN link, while 10-30 seconds is a much more reasonable timeout value. + Defaults to 0 seconds, wait indefinitely. [[upload]] === Section upload Sets the group of users allowed to execute 'upload-pack' on the server, 'upload-pack' is what runs on the server during a user's fetch, clone or repo sync command. ---- [upload] allowGroup = GROUP_ALLOWED_TO_EXECUTE allowGroup = YET_ANOTHER_GROUP_ALLOWED_TO_EXECUTE ---- [[upload.allowGroup]]upload.allowGroup:: + Name of the groups of users that are allowed to execute 'upload-pack' on the server. One or more groups can be set. + If no groups are added, any user will be allowed to execute 'upload-pack' on the server. [[urlAlias]] === Section urlAlias URL aliases define regular expressions for URL tokens that are mapped to target URL tokens. Each URL alias must be specified in its own subsection. The subsection name should be a descriptive name. It must be unique, but is not interpreted in any way. The URL aliases are applied in no particular order. The first matching URL alias is used and further matches are ignored. URL aliases can be used to map plugin screens into the Gerrit URL namespace, or to replace Gerrit screens by plugin screens. Example: ---- [urlAlias "MyPluginScreen"] match = /myscreen/(.*) token = /x/myplugin/myscreen/$1 [urlAlias "MyChangeScreen"] match = /c/(.*) token = /x/myplugin/c/$1 ---- [[urlAlias.match]]urlAlias.match:: + A regular expression for a URL token. + The matched URL token is replaced by `urlAlias.token`. [[urlAlias.token]]urlAlias.token:: + The target URL token. + It can contain placeholders for the groups matched by the `urlAlias.match` regular expression: `$1` for the first matched group, `$2` for the second matched group, etc. [[submodule]] === Section submodule [[submodule.verbosesuperprojectupdate]]submodule.verboseSuperprojectUpdate + When using link:user-submodules.html#automatic_update[automatic superproject updates] this option will determine if the submodule commit messages are included into the commit message of the superproject update. + By default this is true. [[user]] === Section user [[user.name]]user.name:: + Name that Gerrit calls itself in Git when it creates a new Git commit, such as a merge during change submission. + By default this is "Gerrit Code Review". [[user.email]]user.email:: + Email address that Gerrit refers to itself as when it creates a new Git commit, such as a merge commit during change submission. + If not set, Gerrit generates this as "gerrit@`hostname`", where `hostname` is the hostname of the system Gerrit is running on. + By default, not set, generating the value at startup. [[user.anonymousCoward]]user.anonymousCoward:: + Username that is displayed in the Gerrit Web UI and in e-mail notifications if the full name of the user is not set. + By default "Anonymous Coward" is used. == [[secure.config]]File `etc/secure.config` The optional file `'$site_path'/etc/secure.config` overrides (or supplements) the settings supplied by `'$site_path'/etc/gerrit.config`. The file should be readable only by the daemon process and can be used to contain private configuration entries that wouldn't normally be exposed to everyone. Sample `etc/secure.config`: ---- [auth] registerEmailPrivateKey = 2zHNrXE2bsoylzUqDxZp0H1cqUmjgWb6 [database] username = webuser password = s3kr3t [ldap] password = l3tm3srch [httpd] sslKeyPassword = g3rr1t [sendemail] smtpPass = sp@m [remote "bar"] password = s3kr3t ---- == File `etc/peer_keys` The optional file `'$site_path'/etc/peer_keys` controls who can login as the 'Gerrit Code Review' user, required for the link:cmd-suexec.html[suexec] command. The format is one Base-64 encoded public key per line. == Database system_config Several columns in the `system_config` table within the metadata database may be set to control how Gerrit behaves. [NOTE] The contents of the `system_config` table are cached at startup by Gerrit. If you modify any columns in this table, Gerrit needs to be restarted before it will use the new values. === Configurable Parameters site_path:: + Local filesystem directory holding the site customization assets. Placing this directory under version control and/or backup is a good idea. + Files in this directory provide additional configuration. + Other files support site customization. + * link:config-themes.html[Themes] GERRIT ------ Part of link:index.html[Gerrit Code Review] SEARCHBOX ---------