opendev/gerrit
Code Issues Proposed changes
Files
d823dfac818d7b235d86ccd83c9539fe65d1c01b
gerrit/Documentation/rest-api-config.txt
Dave Borowitz 08aa8bb89d RulesCache: Replace manual weak cache with regular Guava cache 
Previously, PrologMachineCopy instances were stored with weak references
in RulesCache's internal cache, which had no other size constraints.
Instances were copied as hard references to ProjectState on demand,
meaning we would only spend memory on PrologMachineCopy instances that
were active in a project we care about in the cache. This was an awkward
and non-obvious two-layer cache.

We can achieve very similar memory performance if we simply convert
RulesCache to a standard Guava cache with hard references, sized to the
number of projects in the cache. Typically, we will store up to one
PrologMachineCopy per project in the cache, and the project cache is
generally sized to the total number of projects in the site. We can let
them expire out of the RulesCache in normal LRU fashion.

Under this implementation, it's possible we will hold on to stale rules
longer than necessary, particularly if rules.pl changes frequently and
the project cache is sized much larger than the total number of
projects. This could be avoided if we convert RulesCache to a
Cache<Project.NameKey, Pair<ObjectId, PrologMachineCopy>> and revalidate
the ObjectId on load; but at this point, that's a premature
optimization.

Tie the configuration of the RulesCache to the ProjectCache, so that it
is sized appropriately. This means that it can't be configured
independently, but we still need to at least mention it in the
documentation, since it will show up in the list of caches exposed to
administrators at runtime.

Change-Id: I1d3e3c013c30dd6d8a2a5d12f45a8e276d6051cd
2018-04-25 13:07:06 -04:00

2114 lines
55 KiB
Plaintext
Raw Blame History

= Gerrit Code Review - /config/ REST API
This page describes the config related REST endpoints.
Please also take note of the general information on the
link:rest-api.html[REST API].
[[config-endpoints]]
Config Endpoints
---------------
[[get-version]]
=== Get Version
--
'GET /config/server/version'
--
Returns the version of the Gerrit server.
.Request
----
GET /config/server/version HTTP/1.0
----
.Response
----
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
)]}'
"2.7"
----
[[get-info]]
=== Get Server Info
--
'GET /config/server/info'
--
Returns the information about the Gerrit server configuration.
.Request
----
GET /config/server/info HTTP/1.0
----
As result a link:#server-info[ServerInfo] entity is returned.
.Response
----
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
)]}'
{
"accounts": {
"visibility": "ALL"
},
"auth": {
"auth_type": "LDAP",
"use_contributor_agreements": true,
"contributor_agreements": [
{
"name": "Individual",
"description": "If you are going to be contributing code on your own, this is the one you want. You can sign this one online.",
"url": "static/cla_individual.html"
}
],
"editable_account_fields": [
"FULL_NAME",
"REGISTER_NEW_EMAIL"
]
},
"download": {
"schemes": {
"anonymous http": {
"url": "http://gerrithost:8080/${project}",
"commands": {
"Checkout": "git fetch http://gerrithost:8080/${project} ${ref} \u0026\u0026 git checkout FETCH_HEAD",
"Format Patch": "git fetch http://gerrithost:8080/${project} ${ref} \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD",
"Pull": "git pull http://gerrithost:8080/${project} ${ref}",
"Cherry Pick": "git fetch http://gerrithost:8080/${project} ${ref} \u0026\u0026 git cherry-pick FETCH_HEAD"
},
"clone_commands": {
"Clone": "git clone http://gerrithost:8080/${project}",
"Clone with commit-msg hook": "git clone http://gerrithost:8080/${project} \u0026\u0026 scp -p -P 29418 jdoe@gerrithost:hooks/commit-msg ${project}/.git/hooks/"
}
},
"http": {
"url": "http://jdoe@gerrithost:8080/${project}",
"is_auth_required": true,
"is_auth_supported": true,
"commands": {
"Checkout": "git fetch http://jdoe@gerrithost:8080/${project} ${ref} \u0026\u0026 git checkout FETCH_HEAD",
"Format Patch": "git fetch http://jdoe@gerrithost:8080/${project} ${ref} \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD",
"Pull": "git pull http://jdoe@gerrithost:8080/${project} ${ref}",
"Cherry Pick": "git fetch http://jdoe@gerrithost:8080/${project} ${ref} \u0026\u0026 git cherry-pick FETCH_HEAD"
},
"clone_commands": {
"Clone": "git clone http://jdoe@gerrithost:8080/${project}",
"Clone with commit-msg hook": "git clone http://jdoe@gerrithost:8080/${project} \u0026\u0026 scp -p -P 29418 jdoe@gerrithost:hooks/commit-msg ${project}/.git/hooks/"
}
},
"ssh": {
"url": "ssh://jdoe@gerrithost:29418/${project}",
"is_auth_required": true,
"is_auth_supported": true,
"commands": {
"Checkout": "git fetch ssh://jdoe@gerrithost:29418/${project} ${ref} \u0026\u0026 git checkout FETCH_HEAD",
"Format Patch": "git fetch ssh://jdoe@gerrithost:29418/${project} ${ref} \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD",
"Pull": "git pull ssh://jdoe@gerrithost:29418/${project} ${ref}",
"Cherry Pick": "git fetch ssh://jdoe@gerrithost:29418/${project} ${ref} \u0026\u0026 git cherry-pick FETCH_HEAD"
},
"clone_commands": {
"Clone": "git clone ssh://jdoe@gerrithost:29418/${project}",
"Clone with commit-msg hook": "git clone ssh://jdoe@gerrithost:29418/${project} \u0026\u0026 scp -p -P 29418 jdoe@gerrithost:hooks/commit-msg ${project}/.git/hooks/"
}
}
},
"archives": [
"tgz",
"tar",
"tbz2",
"txz"
]
},
"gerrit": {
"all_projects": "All-Projects",
"all_users": "All-Users"
"doc_search": true,
"web_uis": [
"gwt"
]
},
"sshd": {},
"suggest": {
"from": 0
},
"user": {
"anonymous_coward_name": "Name of user not set"
}
}
----
[[check-consistency]]
=== Check Consistency
--
'POST /config/server/check.consistency'
--
Runs consistency checks and returns detected problems.
Input for the consistency checks that should be run must be provided in
the request body inside a
link:#consistency-check-input[ConsistencyCheckInput] entity.
.Request
----
POST /config/server/check.consistency HTTP/1.0
Content-Type: application/json; charset=UTF-8
{
"check_accounts": {},
"check_account_external_ids": {}
}
----
As result a link:#consistency-check-info[ConsistencyCheckInfo] entity
is returned that contains detected consistency problems.
.Response
----
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
)]}'
{
"check_accounts_result": {
"problems": [
{
"status": "ERROR",
"message": "Account \u00271000024\u0027 has no external ID for its preferred email \u0027foo.bar@example.com\u0027"
}
]
}
"check_account_external_ids_result": {
"problems": [
{
"status": "ERROR",
"message": "External ID \u0027uuid:ccb8d323-1361-45aa-8874-41987a660c46\u0027 belongs to account that doesn\u0027t exist: 1000012"
}
]
}
}
----
[[reload-config]]
=== Reload Config
--
'POST /config/server/reload'
--
Reloads the gerrit.config configuration.
Not all configuration value can be picked up by this command. Which config
sections and values that are supported is documented here:
link:config-gerrit.html[Configuration]
_The output shows only modified config values that are picked up by Gerrit
and applied._
If a config entry is added or removed from gerrit.config, but still brings
no effect due to a matching default value, no output for this entry is shown.
.Request
----
POST /config/server/reload HTTP/1.0
----
As result a link:#config-update-info[ConfigUpdateInfo] entity is returned that
contains information about how the updated config entries were handled.
.Response
----
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
)]}'
{
"rejected": [],
"applied": [
{
"config_key": "addreviewer.maxAllowed",
"old_value": "20",
"new_value": "15"
}
]
}
----
[[confirm-email]]
=== Confirm Email
--
'PUT /config/server/email.confirm'
--
Confirms that the user owns an email address.
The email token must be provided in the request body inside
an link:#email-confirmation-input[EmailConfirmationInput] entity.
.Request
----
PUT /config/server/email.confirm HTTP/1.0
Content-Type: application/json; charset=UTF-8
{
"token": "Enim+QNbAo6TV8Hur8WwoUypI6apG7qBPvF+bw==$MTAwMDAwNDp0ZXN0QHRlc3QuZGU="
}
----
The response is "`204 No Content`".
If the token is invalid or if it's the token of another user the
request fails and the response is "`422 Unprocessable Entity`".
[[list-caches]]
=== List Caches
--
'GET /config/server/caches/'
--
Lists the caches of the server. Caches defined by plugins are included.
The caller must be a member of a group that is granted one of the
following capabilities:
* link:access-control.html#capability_viewCaches[View Caches]
* link:access-control.html#capability_maintainServer[Maintain Server]
* link:access-control.html#capability_administrateServer[Administrate Server]
As result a map of link:#cache-info[CacheInfo] entities is returned.
The entries in the map are sorted by cache name.
.Request
----
GET /config/server/caches/ HTTP/1.0
----
.Response
----
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
)]}'
{
"accounts": {
"type": "MEM",
"entries": {
"mem": 4
},
"average_get": "2.5ms",
"hit_ratio": {
"mem": 94
}
},
"adv_bases": {
"type": "MEM",
"entries": {},
"hit_ratio": {}
},
"change_kind": {
"type": "DISK",
"entries": {
"space": "0.00k"
},
"hit_ratio": {}
},
"changes": {
"type": "MEM",
"entries": {},
"hit_ratio": {}
},
"conflicts": {
"type": "DISK",
"entries": {
"mem": 2,
"disk": 3,
"space": "2.75k"
},
"hit_ratio": {
"mem": 0,
"disk": 100
}
},
"diff": {
"type": "DISK",
"entries": {
"mem": 177,
"disk": 253,
"space": "170.97k"
},
"average_get": "1.1ms",
"hit_ratio": {
"mem": 67,
"disk": 100
}
},
"diff_intraline": {
"type": "DISK",
"entries": {
"mem": 1,
"disk": 1,
"space": "0.37k"
},
"average_get": "6.8ms",
"hit_ratio": {
"mem": 0
}
},
"git_tags": {
"type": "DISK",
"entries": {
"space": "0.00k"
},
"hit_ratio": {}
},
groups": {
"type": "MEM",
"entries": {
"mem": 27
},
"average_get": "183.2us",
"hit_ratio": {
"mem": 12
}
},
"groups_bymember": {
"type": "MEM",
"entries": {},
"hit_ratio": {}
},
"groups_byname": {
"type": "MEM",
"entries": {},
"hit_ratio": {}
},
"groups_bysubgroup": {
"type": "MEM",
"entries": {},
"hit_ratio": {}
},
"groups_byuuid": {
"type": "MEM",
"entries": {
"mem": 25
},
"average_get": "173.4us",
"hit_ratio": {
"mem": 13
}
},
"groups_external": {
"type": "MEM",
"entries": {},
"hit_ratio": {}
},
"permission_sort": {
"type": "MEM",
"entries": {
"mem": 16
},
"hit_ratio": {
"mem": 96
}
},
"plugin_resources": {
"type": "MEM",
"entries": {
"mem": 2
},
"hit_ratio": {
"mem": 83
}
},
"project_list": {
"type": "MEM",
"entries": {
"mem": 1
},
"average_get": "18.6ms",
"hit_ratio": {
"mem": 0
}
},
"projects": {
"type": "MEM",
"entries": {
"mem": 35
},
"average_get": "8.6ms",
"hit_ratio": {
"mem": 99
}
},
"prolog_rules": {
"type": "MEM",
"entries": {
"mem": 35
},
"average_get": "103.0ms",
"hit_ratio": {
"mem": 99
}
},
"quota-repo_size": {
"type": "DISK",
"entries": {
"space": "0.00k"
},
"hit_ratio": {}
},
"sshkeys": {
"type": "MEM",
"entries": {
"mem": 1
},
"average_get": "3.2ms",
"hit_ratio": {
"mem": 50
}
},
"web_sessions": {
"type": "DISK",
"entries": {
"mem": 1,
"disk": 2,
"space": "0.78k"
},
"hit_ratio": {
"mem": 82
}
}
}
----
It is possible to get different output formats by specifying the
`format` option:
* `LIST`:
+
Returns the cache names as JSON list.
+
The cache names are lexicographically sorted.
+
.Request
----
GET /config/server/caches/?format=LIST HTTP/1.0
----
+
.Response
----
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
)]}'
[
"accounts",
"adv_bases",
"change_kind",
"changes",
"conflicts",
"diff",
"diff_intraline",
"git_tags",
"groups",
"groups_bymember",
"groups_byname",
"groups_bysubgroup",
"groups_byuuid",
"groups_external",
"permission_sort",
"plugin_resources",
"project_list",
"projects",
"prolog_rules",
"quota-repo_size",
"sshkeys",
"web_sessions"
]
----
* `TEXT_LIST`:
+
Returns the cache names as a UTF-8 list that is base64 encoded. The
cache names are delimited by '\n'.
+
The cache names are lexicographically sorted.
+
.Request
----
GET /config/server/caches/?format=TEXT_LIST HTTP/1.0
----
+
.Response
----
HTTP/1.1 200 OK
Content-Type: text/plain; charset=UTF-8
YWNjb3VudHMKYW...ViX3Nlc3Npb25z
----
+
E.g. this could be used to flush all caches:
+
----
for c in $(curl --user jdoe:TNAuLkXsIV7w http://gerrit/a/config/server/caches/?format=TEXT_LIST | base64 -D)
do
curl --user jdoe:TNAuLkXsIV7w -X POST http://gerrit/a/config/server/caches/$c/flush
done
----
[[cache-operations]]
=== Cache Operations
--
'POST /config/server/caches/'
--
Executes a cache operation that is specified in the request body in a
link:#cache-operation-input[CacheOperationInput] entity.
[[flush-all-caches]]
==== Flush All Caches
.Request
----
POST /config/server/caches/ HTTP/1.0
Content-Type: application/json; charset=UTF-8
{
"operation": "FLUSH_ALL"
}
----
.Response
----
HTTP/1.1 200 OK
----
[[flush-several-caches]]
==== Flush Several Caches At Once
.Request
----
POST /config/server/caches/ HTTP/1.0
Content-Type: application/json; charset=UTF-8
{
"operation": "FLUSH",
"caches": [
"projects",
"project_list"
]
}
----
.Response
----
HTTP/1.1 200 OK
----
[[get-cache]]
=== Get Cache
--
'GET /config/server/caches/link:#cache-name[\{cache-name\}]'
--
Retrieves information about a cache.
The caller must be a member of a group that is granted one of the
following capabilities:
* link:access-control.html#capability_viewCaches[View Caches]
* link:access-control.html#capability_maintainServer[Maintain Server]
* link:access-control.html#capability_administrateServer[Administrate Server]
As result a link:#cache-info[CacheInfo] entity is returned.
.Request
----
GET /config/server/caches/projects HTTP/1.0
----
.Response
----
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
)]}'
{
"name": "projects",
"type": "MEM",
"entries": {
"mem": 35
},
"average_get": " 8.6ms",
"hit_ratio": {
"mem": 99
}
}
----
[[flush-cache]]
=== Flush Cache
--
'POST /config/server/caches/link:#cache-name[\{cache-name\}]/flush'
--
Flushes a cache.
The caller must be a member of a group that is granted one of the
following capabilities:
* link:access-control.html#capability_flushCaches[Flush Caches] (any cache
except "web_sessions")
* link:access-control.html#capability_maintainServer[Maintain Server] (any cache
including "web_sessions")
* link:access-control.html#capability_administrateServer[Administrate Server]
(any cache including "web_sessions")
.Request
----
POST /config/server/caches/projects/flush HTTP/1.0
----
.Response
----
HTTP/1.1 200 OK
----
[[get-summary]]
=== Get Summary
--
'GET /config/server/summary'
--
Retrieves a summary of the current server state.
The caller must be a member of a group that is granted the
link:access-control.html#capability_administrateServer[Administrate
Server] capability.
The following options are supported:
* `jvm`:
+
Includes a JVM summary.
* `gc`:
+
Requests a Java garbage collection before computing the information
about the Java memory heap.
.Request
----
GET /config/server/summary?jvm HTTP/1.0
----
As result a link:#summary-info[SummaryInfo] entity is returned.
.Response
----
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
)]}'
{
"task_summary": {
"total": 2,
"sleeping": 2
},
"mem_summary": {
"total": "341.06m",
"used": "57.16m",
"free": "283.90m",
"buffers": "0.00k",
"max": "1.67g",
}
"thread_summary": {
"cpus": 8,
"threads": 44,
"counts": {
"HTTP": {
"RUNNABLE": 3,
"TIMED_WAITING": 2
},
"SSH-Interactive-Worker": {
"WAITING": 1
},
"Other": {
"WAITING": 10,
"RUNNABLE": 2,
"TIMED_WAITING": 25
},
"SshCommandStart": {
"WAITING": 1
}
}
},
"jvm_summary": {
"vm_vendor": "Oracle Corporation",
"vm_name": "Java HotSpot(TM) 64-Bit Server VM",
"vm_version": "23.25-b01",
"os_name": "Mac OS X",
"os_version": "10.8.5",
"os_arch": "x86_64",
"user": "gerrit",
"host": "GERRIT",
"current_working_directory": "/Users/gerrit/site",
"site": "/Users/gerrit/site"
}
}
----
[[list-capabilities]]
=== List Capabilities
--
'GET /config/server/capabilities'
--
Lists the capabilities that are available in the system. There are two
kinds of capabilities: core and plugin-owned capabilities.
As result a map of link:#capability-info[CapabilityInfo] entities is
returned.
The entries in the map are sorted by capability ID.
.Request
----
GET /config/server/capabilities/ HTTP/1.0
----
.Response
----
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
)]}'
{
"accessDatabase": {
"id": "accessDatabase",
"name": "Access Database"
},
"administrateServer": {
"id": "administrateServer",
"name": "Administrate Server"
},
"createAccount": {
"id": "createAccount",
"name": "Create Account"
},
"createGroup": {
"id": "createGroup",
"name": "Create Group"
},
"createProject": {
"id": "createProject",
"name": "Create Project"
},
"emailReviewers": {
"id": "emailReviewers",
"name": "Email Reviewers"
},
"flushCaches": {
"id": "flushCaches",
"name": "Flush Caches"
},
"killTask": {
"id": "killTask",
"name": "Kill Task"
},
"priority": {
"id": "priority",
"name": "Priority"
},
"queryLimit": {
"id": "queryLimit",
"name": "Query Limit"
},
"runGC": {
"id": "runGC",
"name": "Run Garbage Collection"
},
"streamEvents": {
"id": "streamEvents",
"name": "Stream Events"
},
"viewCaches": {
"id": "viewCaches",
"name": "View Caches"
},
"viewConnections": {
"id": "viewConnections",
"name": "View Connections"
},
"viewPlugins": {
"id": "viewPlugins",
"name": "View Plugins"
},
"viewQueue": {
"id": "viewQueue",
"name": "View Queue"
}
}
----
[[list-tasks]]
=== List Tasks
--
'GET /config/server/tasks/'
--
Lists the tasks from the background work queues that the Gerrit daemon
is currently performing, or will perform in the near future.
Gerrit contains an internal scheduler, similar to cron, that it uses to
queue and dispatch both short and long term tasks.
Tasks that are completed or canceled exit the queue very quickly once
they enter this state, but it can be possible to observe tasks in these
states.
End-users may see a task only if they can also see the project the task
is associated with. Tasks operating on other projects, or that do not
have a specific project, are hidden.
The caller must be a member of a group that is granted one of the
following capabilities:
* link:access-control.html#capability_viewQueue[View Queue]
* link:access-control.html#capability_maintainServer[Maintain Server]
* link:access-control.html#capability_administrateServer[Administrate Server]
As result a list of link:#task-info[TaskInfo] entities is returned.
The entries in the list are sorted by task state, remaining delay and
command.
.Request
----
GET /config/server/tasks/ HTTP/1.0
----
.Response
----
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
)]}'
[
{
"id": "1e688bea",
"state": "SLEEPING",
"start_time": "2014-06-11 12:58:51.991000000",
"delay": 3453,
"command": "Reload Submit Queue"
},
{
"id": "3e6d4ffa",
"state": "SLEEPING",
"start_time": "2014-06-11 12:58:51.508000000",
"delay": 3287966,
"command": "Log File Compressor"
}
]
----
[[get-task]]
=== Get Task
--
'GET /config/server/tasks/link:#task-id[\{task-id\}]'
--
Retrieves a task from the background work queue that the Gerrit daemon
is currently performing, or will perform in the near future.
End-users may see a task only if they can also see the project the task
is associated with. Tasks operating on other projects, or that do not
have a specific project, are hidden.
The caller must be a member of a group that is granted one of the
following capabilities:
* link:access-control.html#capability_viewQueue[View Queue]
* link:access-control.html#capability_maintainServer[Maintain Server]
* link:access-control.html#capability_administrateServer[Administrate Server]
As result a link:#task-info[TaskInfo] entity is returned.
.Request
----
GET /config/server/tasks/1e688bea HTTP/1.0
----
.Response
----
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
)]}'
{
"id": "1e688bea",
"state": "SLEEPING",
"start_time": "2014-06-11 12:58:51.991000000",
"delay": 3453,
"command": "Reload Submit Queue"
}
----
[[delete-task]]
=== Delete Task
--
'DELETE /config/server/tasks/link:#task-id[\{task-id\}]'
--
Kills a task from the background work queue that the Gerrit daemon
is currently performing, or will perform in the near future.
The caller must be a member of a group that is granted one of the
following capabilities:
* link:access-control.html#capability_kill[Kill Task]
* link:access-control.html#capability_maintainServer[Maintain Server]
* link:access-control.html#capability_administrateServer[Administrate Server]
End-users may see a task only if they can also see the project the task
is associated with. Tasks operating on other projects, or that do not
have a specific project, are hidden.
Members of a group granted one of the following capabilities may view
all tasks:
* link:access-control.html#capability_viewQueue[View Queue]
* link:access-control.html#capability_maintainServer[Maintain Server]
* link:access-control.html#capability_administrateServer[Administrate Server]
.Request
----
DELETE /config/server/tasks/1e688bea HTTP/1.0
----
.Response
----
HTTP/1.1 204 No Content
----
[[get-top-menus]]
=== Get Top Menus
--
'GET /config/server/top-menus'
--
Returns the list of additional top menu entries.
.Request
----
GET /config/server/top-menus HTTP/1.0
----
As response a list of the additional top menu entries as
link:#top-menu-entry-info[TopMenuEntryInfo] entities is returned.
.Response
----
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
)]}'
[
{
"name": "Top Menu Entry",
"items": [
{
"url": "http://gerrit.googlecode.com/",
"name": "Gerrit",
"target": "_blank"
}
]
}
]
----
[[get-user-preferences]]
=== Get Default User Preferences
--
'GET /config/server/preferences'
--
Returns the default user preferences for the server.
.Request
----
GET /a/config/server/preferences HTTP/1.0
----
As response a link:rest-api-accounts.html#preferences-info[
PreferencesInfo] is returned.
.Response
----
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
)]}'
{
"changes_per_page": 25,
"show_site_header": true,
"use_flash_clipboard": true,
"download_command": "CHECKOUT",
"date_format": "STD",
"time_format": "HHMM_12",
"diff_view": "SIDE_BY_SIDE",
"size_bar_in_change_table": true,
"review_category_strategy": "NONE",
"mute_common_path_prefixes": true,
"publish_comments_on_push": true,
"my": [
{
"url": "#/dashboard/self",
"name": "Changes"
},
{
"url": "#/q/has:draft",
"name": "Draft Comments"
},
{
"url": "#/q/has:edit",
"name": "Edits"
},
{
"url": "#/q/is:watched+is:open",
"name": "Watched Changes"
},
{
"url": "#/q/is:starred",
"name": "Starred Changes"
},
{
"url": "#/groups/self",
"name": "Groups"
}
],
"email_strategy": "ENABLED"
}
----
[[set-user-preferences]]
=== Set Default User Preferences
--
'PUT /config/server/preferences'
--
Sets the default user preferences for the server.
The new user preferences must be provided in the request body as a
link:rest-api-accounts.html#preferences-input[PreferencesInput]
entity.
To be allowed to set default preferences, a user must be a member of
a group that is granted the
link:access-control.html#capability_administrateServer[
Administrate Server] capability.
.Request
----
PUT /a/config/server/preferences HTTP/1.0
Content-Type: application/json; charset=UTF-8
{
"changes_per_page": 50
}
----
As response a link:rest-api-accounts.html#preferences-info[
PreferencesInfo] is returned.
.Response
----
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
)]}'
{
"changes_per_page": 50,
"show_site_header": true,
"use_flash_clipboard": true,
"download_command": "CHECKOUT",
"date_format": "STD",
"time_format": "HHMM_12",
"diff_view": "SIDE_BY_SIDE",
"size_bar_in_change_table": true,
"review_category_strategy": "NONE",
"mute_common_path_prefixes": true,
"publish_comments_on_push": true,
"my": [
{
"url": "#/dashboard/self",
"name": "Changes"
},
{
"url": "#/q/has:draft",
"name": "Draft Comments"
},
{
"url": "#/q/has:edit",
"name": "Edits"
},
{
"url": "#/q/is:watched+is:open",
"name": "Watched Changes"
},
{
"url": "#/q/is:starred",
"name": "Starred Changes"
},
{
"url": "#/groups/self",
"name": "Groups"
}
],
"email_strategy": "ENABLED"
}
----
[[get-diff-preferences]]
=== Get Default Diff Preferences
--
'GET /config/server/preferences.diff'
--
Returns the default diff preferences for the server.
.Request
----
GET /a/config/server/preferences.diff HTTP/1.0
----
As response a link:rest-api-accounts.html#diff-preferences-info[
DiffPreferencesInfo] is returned.
.Response
----
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
)]}'
{
"context": 10,
"tab_size": 8,
"line_length": 100,
"cursor_blink_rate": 0,
"intraline_difference": true,
"show_line_endings": true,
"show_tabs": true,
"show_whitespace_errors": true,
"syntax_highlighting": true,
"auto_hide_diff_table_header": true,
"theme": "DEFAULT",
"ignore_whitespace": "IGNORE_NONE"
}
----
[[set-diff-preferences]]
=== Set Default Diff Preferences
--
'PUT /config/server/preferences.diff'
--
Sets the default diff preferences for the server.
The new diff preferences must be provided in the request body as a
link:rest-api-accounts.html#diff-preferences-input[
DiffPreferencesInput] entity.
To be allowed to set default diff preferences, a user must be a member
of a group that is granted the
link:access-control.html#capability_administrateServer[
Administrate Server] capability.
.Request
----
PUT /a/config/server/preferences.diff HTTP/1.0
Content-Type: application/json; charset=UTF-8
{
"context": 10,
"tab_size": 8,
"line_length": 80,
"cursor_blink_rate": 0,
"intraline_difference": true,
"show_line_endings": true,
"show_tabs": true,
"show_whitespace_errors": true,
"syntax_highlighting": true,
"auto_hide_diff_table_header": true,
"theme": "DEFAULT",
"ignore_whitespace": "IGNORE_NONE"
}
----
As response a link:rest-api-accounts.html#diff-preferences-info[
DiffPreferencesInfo] is returned.
.Response
----
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
)]}'
{
"context": 10,
"tab_size": 8,
"line_length": 80,
"cursor_blink_rate": 0,
"intraline_difference": true,
"show_line_endings": true,
"show_tabs": true,
"show_whitespace_errors": true,
"syntax_highlighting": true,
"auto_hide_diff_table_header": true,
"theme": "DEFAULT",
"ignore_whitespace": "IGNORE_NONE"
}
----
[[get-edit-preferences]]
=== Get Default Edit Preferences
--
'GET /config/server/preferences.edit'
--
Returns the default edit preferences for the server.
.Request
----
GET /a/config/server/preferences.edit HTTP/1.0
----
As response a link:rest-api-accounts.html#edit-preferences-info[
EditPreferencesInfo] is returned.
.Response
----
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
)]}'
{
"tab_size": 8,
"line_length": 100,
"indent_unit": 2,
"cursor_blink_rate": 0,
"show_tabs": true,
"syntax_highlighting": true,
"match_brackets": true,
"auto_close_brackets": true,
"theme": "DEFAULT",
"key_map_type": "DEFAULT"
}
----
[[set-edit-preferences]]
=== Set Default Edit Preferences
--
'PUT /config/server/preferences.edit'
--
Sets the default edit preferences for the server.
The new edit preferences must be provided in the request body as a
link:rest-api-accounts.html#edit-preferences-input[
EditPreferencesInput] entity.
To be allowed to set default edit preferences, a user must be a member
of a group that is granted the
link:access-control.html#capability_administrateServer[
Administrate Server] capability.
.Request
----
PUT /a/config/server/preferences.edit HTTP/1.0
Content-Type: application/json; charset=UTF-8
{
"tab_size": 8,
"line_length": 80,
"indent_unit": 2,
"cursor_blink_rate": 0,
"show_tabs": true,
"syntax_highlighting": true,
"match_brackets": true,
"auto_close_brackets": true,
"theme": "DEFAULT",
"key_map_type": "DEFAULT"
}
----
As response a link:rest-api-accounts.html#edit-preferences-info[
EditPreferencesInfo] is returned.
.Response
----
HTTP/1.1 200 OK
Content-Type: application/json; charset=UTF-8
)]}'
{
"tab_size": 8,
"line_length": 80,
"indent_unit": 2,
"cursor_blink_rate": 0,
"show_tabs": true,
"syntax_highlighting": true,
"match_brackets": true,
"auto_close_brackets": true,
"theme": "DEFAULT",
"key_map_type": "DEFAULT"
}
----
[[ids]]
== IDs
[[cache-name]]
=== \{cache-name\}
The name of the cache.
If the cache is defined by a plugin the cache name must include the
plugin name: "<plugin-name>-<cache-name>".
Gerrit core caches can optionally be prefixed with "gerrit":
"gerrit-<cache-name>".
[[task-id]]
=== \{task-id\}
The ID of the task (hex string).
[[json-entities]]
== JSON Entities
[[accounts-config-info]]
=== AccountsConfigInfo
The `AccountsConfigInfo` entity contains information about Gerrit
configuration from the link:config-gerrit.html#accounts[accounts]
section.
[options="header",cols="1,6"]
|=============================
|Field Name |Description
|`visibility` |
link:config-gerrit.html#accounts.visibility[Visibility setting for
accounts].
|=============================
[[auth-info]]
=== AuthInfo
The `AuthInfo` entity contains information about the authentication
configuration of the Gerrit server.
[options="header",cols="1,^1,5"]
|==========================================
|Field Name ||Description
|`type` ||
The link:config-gerrit.html#auth.type[authentication type] that is
configured on the server. Can be `OPENID`, `OPENID_SSO`, `OAUTH`,
`HTTP`, `HTTP_LDAP`, `CLIENT_SSL_CERT_LDAP`, `LDAP`, `LDAP_BIND`,
`CUSTOM_EXTENSION` or `DEVELOPMENT_BECOME_ANY_ACCOUNT`.
|`use_contributor_agreements` |not set if `false`|
Whether link:config-gerrit.html#auth.contributorAgreements[contributor
agreements] are required.
|`contributor_agreements` |not set if `use_contributor_agreements` is `false`|
List of contributor agreements as link:rest-api-accounts.html#contributor-agreement-info[
ContributorAgreementInfo] entities.
|`editable_account_fields` ||
List of account fields that are editable. Possible values are
`FULL_NAME`, `USER_NAME` and `REGISTER_NEW_EMAIL`.
|`login_url` |optional|
The link:config-gerrit.html#auth.loginUrl[login URL]. Only set if
link:config-gerrit.html#auth.type[authentication type] is `HTTP` or
`HTTP_LDAP`.
|`login_text` |optional|
The link:config-gerrit.html#auth.loginText[login text]. Only set if
link:config-gerrit.html#auth.type[authentication type] is `HTTP` or
`HTTP_LDAP`.
|`switch_account_url` |optional|
The link:config-gerrit.html#auth.switchAccountUrl[URL to switch
accounts].
|`register_url` |optional|
The link:config-gerrit.html#auth.registerUrl[register URL]. Only set if
link:config-gerrit.html#auth.type[authentication type] is `LDAP`,
`LDAP_BIND` or `CUSTOM_EXTENSION`.
|`register_text` |optional|
The link:config-gerrit.html#auth.registerText[register text]. Only set
if link:config-gerrit.html#auth.type[authentication type] is `LDAP`,
`LDAP_BIND` or `CUSTOM_EXTENSION`.
|`edit_full_name_url` |optional|
The link:config-gerrit.html#auth.editFullNameUrl[URL to edit the full
name]. Only set if link:config-gerrit.html#auth.type[authentication
type] is `LDAP`, `LDAP_BIND` or `CUSTOM_EXTENSION`.
|`http_password_url` |optional|
The link:config-gerrit.html#auth.httpPasswordUrl[URL to obtain an HTTP
password]. Only set if link:config-gerrit.html#auth.type[authentication
type] is `CUSTOM_EXTENSION`.
|`git_basic_auth_policy` |optional|
The link:config-gerrit.html#auth.gitBasicAuthPolicy[policy] to authenticate
Git over HTTP and REST API requests when
link:config-gerrit.html#auth.type[authentication type] is `LDAP`.
Can be `HTTP`, `LDAP` or `HTTP_LDAP`.
|==========================================
[[cache-info]]
=== CacheInfo
The `CacheInfo` entity contains information about a cache.
[options="header",cols="1,^1,5"]
|==================================
|Field Name ||Description
|`name` |
not set if returned in a map where the cache name is used as map key|
The cache name. If the cache is defined by a plugin the cache name
includes the plugin name: "<plugin-name>-<cache-name>".
|`type` ||
The type of the cache (`MEM`: in memory cache, `DISK`: disk cache).
|`entries` ||
Information about the entries in the cache as a
link:#entries-info[EntriesInfo] entity.
|`average_get` |optional|
The average duration of getting one entry from the cache. The value is
returned with a standard time unit abbreviation (`ns`: nanoseconds,
`us`: microseconds, `ms`: milliseconds, `s`: seconds).
|`hit_ratio` ||
Information about the hit ratio as a link:#hit-ration-info[
HitRatioInfo] entity.
|==================================
[[cache-operation-input]]
=== CacheOperationInput
The `CacheOperationInput` entity contains information about an
operation that should be executed on caches.
[options="header",cols="1,^1,5"]
|==================================
|Field Name ||Description
|`operation` ||
The cache operation that should be executed:
`FLUSH_ALL`: Flushes all caches, except the `web_sessions` cache.
`FLUSH`: Flushes the specified caches.
|`caches` |optional|
A list of cache names. This list defines the caches on which the
specified operation should be executed. Whether this list must be
specified depends on the operation being executed.
|==================================
[[capability-info]]
=== CapabilityInfo
The `CapabilityInfo` entity contains information about a capability.
[options="header",cols="1,6"]
|=================================
|Field Name |Description
|`id` |capability ID
|`name` |capability name
|=================================
[[change-config-info]]
=== ChangeConfigInfo
The `ChangeConfigInfo` entity contains information about Gerrit
configuration from the link:config-gerrit.html#change[change]
section.
[options="header",cols="1,^1,5"]
|=============================
|Field Name ||Description
|`allow_blame` |not set if `false`|
link:config-gerrit.html#change.allowBlame[Whether blame on side by side diff is
allowed].
|`large_change` ||
link:config-gerrit.html#change.largeChange[Number of changed lines from
which on a change is considered as a large change].
|`reply_label` ||
link:config-gerrit.html#change.replyTooltip[Label name for the reply
button].
|`reply_tooltip` ||
link:config-gerrit.html#change.replyTooltip[Tooltip for the reply
button].
|`update_delay` ||
link:config-gerrit.html#change.updateDelay[How often in seconds the web
interface should poll for updates to the currently open change].
|`submit_whole_topic` ||
link:config-gerrit.html#change.submitWholeTopic[A configuration if
the whole topic is submitted].
|`disable_private_changes` |not set if `false`|
Returns true if private changes are disabled.
|=============================
[[check-account-external-ids-input]]
=== CheckAccountExternalIdsInput
The `CheckAccountExternalIdsInput` entity contains input for the
account external ID consistency check.
Currently this entity contains no fields.
[[check-account-external-ids-result-info]]
=== CheckAccountExternalIdsResultInfo
The `CheckAccountExternalIdsResultInfo` entity contains the result of
running the account external ID consistency check.
[options="header",cols="1,6"]
|======================
|Field Name|Description
|`problems`|A list of link:#consistency-problem-info[
ConsistencyProblemInfo] entities.
|======================
[[check-accounts-input]]
=== CheckAccountsInput
The `CheckAccountsInput` entity contains input for the account consistency
check.
Currently this entity contains no fields.
[[check-accounts-result-info]]
=== CheckAccountsResultInfo
The `CheckAccountsResultInfo` entity contains the result of running the
account consistency check.
[options="header",cols="1,6"]
|======================
|Field Name|Description
|`problems`|A list of link:#consistency-problem-info[
ConsistencyProblemInfo] entities.
|======================
[[check-groups-input]]
=== CheckGroupsInput
The `CheckGroupsInput` entity contains input for the group consistency
check.
Currently this entity contains no fields.
[[check-groups-result-info]]
=== CheckGroupsResultInfo
The `CheckGroupsResultInfo` entity contains the result of running the
group consistency check.
[options="header",cols="1,6"]
|======================
|Field Name|Description
|`problems`|A list of link:#consistency-problem-info[
ConsistencyProblemInfo] entities.
|======================
[[consistency-check-info]]
=== ConsistencyCheckInfo
The `ConsistencyCheckInfo` entity contains the results of running
consistency checks.
[options="header",cols="1,^1,5"]
|================================================
|Field Name ||Description
|`check_accounts_result` |optional|
The result of running the account consistency check as a
link:#check-accounts-result-info[CheckAccountsResultInfo] entity.
|`check_account_external_ids_result`|optional|
The result of running the account external ID consistency check as a
link:#check-account-external-ids-result-info[
CheckAccountExternalIdsResultInfo] entity.
|`check_groups_result` |optional|
The result of running the group consistency check as a
link:#check-groups-result-info[CheckGroupsResultInfo] entity.
|================================================
[[consistency-check-input]]
=== ConsistencyCheckInput
The `ConsistencyCheckInput` entity contains information about which
consistency checks should be run.
[options="header",cols="1,^1,5"]
|=========================================
|Field Name ||Description
|`check_accounts` |optional|
Input for the account consistency check as
link:#check-accounts-input[CheckAccountsInput] entity.
|`check_account_external_ids`|optional|
Input for the account external ID consistency check as
link:#check-account-external-ids-input[CheckAccountExternalIdsInput]
entity.
|`check_groups` |optional|
Input for the group consistency check as link:#check-groups-input[
CheckGroupsInput] entity.
|=========================================
[[consistency-problem-info]]
=== ConsistencyProblemInfo
The `ConsistencyProblemInfo` entity contains information about a
consistency problem.
[options="header",cols="1,6"]
|======================
|Field Name|Description
|`status` |The status of the consistency problem. +
Possible values are `ERROR` and `WARNING`.
|`message` |Message describing the consistency problem.
|======================
[[config-update-info]]
=== ConfigUpdateInfo
The entity describes the result of a reload of gerrit.config.
If a changed config value is missing from the `applied` and the `rejected`
lists there are no guarantees to whether they have or have not taken effect.
[options="header",cols="1,6"]
|======================
|Field Name|Description
|`applied` |A list of link:#config-update-entry-info[ConfigUpdateEntryInfos]
describing the applied configuration changes. +
Every config value change representation present in this list is guaranteed to
have taken effect.
|`rejected` |A list of link:#config-update-entry-info[ConfigUpdateEntryInfos]
describing the rejected configuration changes. +
Every config value change representation present in this list is guaranteed not
to have taken effect.
|======================
[[config-update-entry-info]]
=== ConfigUpdateEntryInfo
The entity describes an updated config value.
[options="header",cols="1,6"]
|======================
|Field Name|Description
|`config_key` |The config key that contains the value.
|`old_value` |The old config value. +
Missing if value was not previously configured.
|`new_value` |The new config value, picked up after reload.
|======================
[[download-info]]
=== DownloadInfo
The `DownloadInfo` entity contains information about supported download
options.
[options="header",cols="1,6"]
|=======================
|Field Name |Description
|`schemes` |
The supported download schemes as a map which maps the scheme name to a
of link:#download-scheme-info[DownloadSchemeInfo] entity.
|`archives` |
List of supported archive formats. Possible values are `tgz`, `tar`,
`tbz2` and `txz`.
|=======================
[[download-scheme-info]]
=== DownloadSchemeInfo
The `DownloadSchemeInfo` entity contains information about a supported
download scheme and its commands.
[options="header",cols="1,^1,5"]
|=================================
|Field Name ||Description
|`url` ||
The URL of the download scheme, where '${project}' is used as
placeholder for the project name.
|`is_auth_required` |not set if `false`|
Whether this download scheme requires authentication.
|`is_auth_supported` |not set if `false`|
Whether this download scheme supports authentication.
|`commands` ||
Download commands as a map which maps the command name to the download
command. In the download command '${project}' is used as
placeholder for the project name, and '${ref}' is used as
placeholder for the (change) ref.
Empty, if accessed anonymously and the download scheme requires
authentication.
|`clone_commands` ||
Clone commands as a map which maps the command name to the clone
command. In the clone command '${project}' is used as
placeholder for the project name and '${project-base-name}' as name
for the project base name (e.g. for a project 'foo/bar' '${project}'
is a placeholder for 'foo/bar' and '${project-base-name}' is a
placeholder for 'bar').
Empty, if accessed anonymously and the download scheme requires
authentication.
|=================================
[[email-confirmation-input]]
=== EmailConfirmationInput
The `EmailConfirmationInput` entity contains information for confirming
an email address.
[options="header",cols="1,6"]
|=======================
|Field Name |Description
|`token` |
The token that was sent by mail to a newly registered email address.
|=======================
[[entries-info]]
=== EntriesInfo
The `EntriesInfo` entity contains information about the entries in a
cache.
[options="header",cols="1,^1,5"]
|==================================
|Field Name ||Description
|`mem` |optional|Number of cache entries that are held in memory.
|`disk` |optional|Number of cache entries on the disk. For non-disk
caches this value is not set; for disk caches it is only set if there
are entries in the cache.
|`space` |optional|
The space that is consumed by the cache on disk. The value is returned
with a unit abbreviation (`k`: kilobytes, `m`: megabytes,
`g`: gigabytes). Only set for disk caches.
|==================================
[[gerrit-info]]
=== GerritInfo
The `GerritInfo` entity contains information about Gerrit
configuration from the link:config-gerrit.html#gerrit[gerrit] section.
[options="header",cols="1,^1,5"]
|=================================
|Field Name ||Description
|`all_projects_name` ||
Name of the link:config-gerrit.html#gerrit.allProjects[root project].
|`all_users_name` ||
Name of the link:config-gerrit.html#gerrit.allUsers[project in which
meta data of all users is stored].
|`doc_search` ||
Whether documentation search is available.
|`doc_url` |optional|
Custom base URL where Gerrit server documentation is located.
(Documentation may still be available at /Documentation relative to the
Gerrit base path even if this value is unset.)
|`edit_gpg_keys` |not set if `false`|
Whether to enable the web UI for editing GPG keys.
|`report_bug_url` |optional|
link:config-gerrit.html#gerrit.reportBugUrl[URL to report bugs].
|`report_bug_text` |optional, not set if default|
link:config-gerrit.html#gerrit.reportBugText[Display text for report
bugs link].
|`web_uis` ||
List of web UIs supported by the HTTP server. Possible values are `GWT`
and `POLYGERRIT`.
|=================================
[[hit-ration-info]]
=== HitRatioInfo
The `HitRatioInfo` entity contains information about the hit ratio of a
cache.
[options="header",cols="1,^1,5"]
|==================================
|Field Name ||Description
|`mem` ||
Hit ratio for cache entries that are held in memory (0 \<= value \<= 100).
|`disk` |optional|
Hit ratio for cache entries that are held on disk (0 \<= value \<= 100).
Only set for disk caches.
|==================================
[[jvm-summary-info]]
=== JvmSummaryInfo
The `JvmSummaryInfo` entity contains information about the JVM.
[options="header",cols="1,^1,5"]
|========================================
|Field Name ||Description
|`vm_vendor` ||The vendor of the virtual machine.
|`vm_name` ||The name of the virtual machine.
|`vm_version` ||The version of the virtual machine.
|`os_name` ||The name of the operating system.
|`os_version` ||The version of the operating system.
|`os_arch` ||The architecture of the operating system.
|`user` ||The user that is running Gerrit.
|`host` |optional|
The host on which Gerrit is running.
|`current_working_directory`||The current working directory.
|`site` ||The path to the review site.
|========================================
[[mem-summary-info]]
=== MemSummaryInfo
The `MemSummaryInfo` entity contains information about the current
memory usage.
[options="header",cols="1,^1,5"]
|============================
|Field Name ||Description
|`total` ||
The total size of the memory. The value is returned with a unit
abbreviation (`k`: kilobytes, `m`: megabytes, `g`: gigabytes).
|`used` ||
The size of used memory. The value is returned with a unit abbreviation
(`k`: kilobytes, `m`: megabytes, `g`: gigabytes).
|`free` ||
The size of free memory. The value is returned with a unit abbreviation
(`k`: kilobytes, `m`: megabytes, `g`: gigabytes).
|`buffers` ||
The size of memory used for JGit buffers. The value is returned with a
unit abbreviation (`k`: kilobytes, `m`: megabytes, `g`: gigabytes).
|`max` ||
The maximal memory size. The value is returned with a unit abbreviation
(`k`: kilobytes, `m`: megabytes, `g`: gigabytes).
|`open_files` |optional|
The number of open files.
|============================
[[plugin-config-info]]
=== PluginConfigInfo
The `PluginConfigInfo` entity contains information about Gerrit
extensions by plugins.
[options="header",cols="1,^1,5"]
|===========================
|Field Name ||Description
|`has_avatars` |not set if `false`|
Whether an avatar provider is registered.
|===========================
[[receive-info]]
=== ReceiveInfo
The `ReceiveInfo` entity contains information about the configuration
of git-receive-pack behavior on the server.
[options="header",cols="1,^1,5"]
|=======================================
|Field Name ||Description
|`enableSignedPush`|optional|
Whether signed push validation support is enabled on the server; see the
link:config-gerrit.html#receive.certNonceSeed[global configuration] for
details.
|=======================================
[[server-info]]
=== ServerInfo
The `ServerInfo` entity contains information about the configuration of
the Gerrit server.
[options="header",cols="1,^1,5"]
|=======================================
|Field Name ||Description
|`accounts` ||
Information about the configuration from the
link:config-gerrit.html#accounts[accounts] section as
link:#accounts-config-info[AccountsConfigInfo] entity.
|`auth` ||
Information about the authentication configuration as
link:#auth-info[AuthInfo] entity.
|`change` ||
Information about the configuration from the
link:config-gerrit.html#change[change] section as
link:#change-config-info[ChangeConfigInfo] entity.
|`download` ||
Information about the configured download options as
link:#download-info[DownloadInfo] entity.
information about Gerrit
|`gerrit` ||
Information about the configuration from the
link:config-gerrit.html#gerrit[gerrit] section as link:#gerrit-info[
GerritInfo] entity.
|`note_db_enabled` |not set if `false`|
Whether the NoteDb storage backend is fully enabled.
|`plugin ` ||
Information about Gerrit extensions by plugins as
link:#plugin-config-info[PluginConfigInfo] entity.
|`receive` |optional|
Information about the receive-pack configuration as a
link:#receive-info[ReceiveInfo] entity.
|`sshd` |optional|
Information about the configuration from the
link:config-gerrit.html#sshd[sshd] section as link:#sshd-info[SshdInfo]
entity. Not set if SSHD is disabled.
|`suggest` ||
Information about the configuration from the
link:config-gerrit.html#suggest[suggest] section as link:#suggest-info[
SuggestInfo] entity.
|`url_aliases` |optional|
A map of URL aliases, where a regular expression for an URL token is
mapped to a target URL token. The target URL token can contain
placeholders for the groups matched by the regular expression: `$1` for
the first matched group, `$2` for the second matched group, etc.
|`user` ||
Information about the configuration from the
link:config-gerrit.html#user[user] section as link:#user-config-info[
UserConfigInfo] entity.
|`default_theme` |optional|
URL to a default PolyGerrit UI theme plugin, if available.
Located in `/static/gerrit-theme.html` by default.
|=======================================
[[sshd-info]]
=== SshdInfo
The `SshdInfo` entity contains information about Gerrit
configuration from the link:config-gerrit.html#sshd[sshd]
section.
This entity doesn't contain any data, but the presence of this (empty)
entity in the link:#server-info[ServerInfo] entity means that SSHD is
enabled on the server.
[[suggest-info]]
=== SuggestInfo
The `SuggestInfo` entity contains information about Gerrit
configuration from the link:config-gerrit.html#suggest[suggest]
section.
[options="header",cols="1,6"]
|=======================
|Field Name |Description
|`from` |
The link:config-gerrit.html#suggest.from[number of characters] that a
user must have typed before suggestions are provided.
|=======================
[[summary-info]]
=== SummaryInfo
The `SummaryInfo` entity contains information about the current state
of the server.
[options="header",cols="1,^1,5"]
|============================
|Field Name ||Description
|`task_summary` ||
Summary about current tasks as a link:#task-summary-info[
TaskSummaryInfo] entity.
|`mem_summary` ||
Summary about current memory usage as a link:#mem-summary-info[
MemSummaryInfo] entity.
|`thread_summary` ||
Summary about current threads as a link:#thread-summary-info[
ThreadSummaryInfo] entity.
|`jvm_summary` |optional|
Summary about the JVM link:#jvm-summary-info[JvmSummaryInfo] entity.
Only set if the `jvm` option was set.
|============================
[[task-info]]
=== TaskInfo
The `TaskInfo` entity contains information about a task in a background
work queue.
[options="header",cols="1,^1,5"]
|====================================
|Field Name ||Description
|`id` ||The ID of the task.
|`state` ||
The state of the task, can be `DONE`, `CANCELLED`, `RUNNING`, `READY`,
`SLEEPING` and `OTHER`.
|`start_time` ||The start time of the task.
|`delay` ||The remaining delay of the task.
|`command` ||The command of the task.
|`remote_name`|optional|
The remote name. May only be set for tasks that are associated with a
project.
|`project` |optional|The project the task is associated with.
|====================================
[[task-summary-info]]
=== TaskSummaryInfo
The `TaskSummaryInfo` entity contains information about the current
tasks.
[options="header",cols="1,^1,5"]
|============================
|Field Name ||Description
|`total` |optional|
Total number of current tasks.
|`running` |optional|
Number of currently running tasks.
|`ready` |optional|
Number of currently ready tasks.
|`sleeping` |optional|
Number of currently sleeping tasks.
|============================
[[thread-summary-info]]
=== ThreadSummaryInfo
The `ThreadSummaryInfo` entity contains information about the current
threads.
[options="header",cols="1,6"]
|===========================
|Field Name |Description
|`cpus` |
The number of available processors.
|`threads` |
The total number of current threads.
|`counts` |
Detailed thread counts as a map that maps a thread kind to a map that
maps a thread state to the thread count. The thread kinds group the
counts by threads that have the same name prefix (`H2`, `HTTP`,
`IntraLineDiff`, `ReceiveCommits`, `SSH git-receive-pack`,
`SSH git-upload-pack`, `SSH-Interactive-Worker`, `SSH-Stream-Worker`,
`SshCommandStart`, `sshd-SshServer`). The counts for other threads are
available under the thread kind `Other`. Counts for the following thread
states can be included: `NEW`, `RUNNABLE`, `BLOCKED`, `WAITING`,
`TIMED_WAITING` and `TERMINATED`.
|===========================
[[top-menu-entry-info]]
=== TopMenuEntryInfo
The `TopMenuEntryInfo` entity contains information about a top menu
entry.
[options="header",cols="1,6"]
|=================================
|Field Name |Description
|`name` |Name of the top menu entry.
|`items` |List of link:#top-menu-item-info[menu items].
|=================================
[[top-menu-item-info]]
=== TopMenuItemInfo
The `TopMenuItemInfo` entity contains information about a menu item in
a top menu entry.
[options="header",cols="1,^1,5"]
|========================
|Field Name ||Description
|`url` ||The URL of the menu item link.
|`name` ||The name of the menu item.
|`target` ||Target attribute of the menu item link.
|`id` |optional|The `id` attribute of the menu item link.
|========================
[[user-config-info]]
=== UserConfigInfo
The `UserConfigInfo` entity contains information about Gerrit
configuration from the link:config-gerrit.html#user[user] section.
[options="header",cols="1,6"]
|====================================
|Field Name |Description
|`anonymous_coward_name` |
link:config-gerrit.html#user.anonymousCoward[Username] that is
displayed in the Gerrit Web UI and in e-mail notifications if the full
name of the user is not set.
|====================================
GERRIT
------
Part of link:index.html[Gerrit Code Review]
SEARCHBOX
---------
View Git Blame Copy Permalink