From 852c94ab73a2f89804673c1803dda696f0b00a9f Mon Sep 17 00:00:00 2001 From: Monty Taylor Date: Wed, 22 Apr 2020 08:55:38 -0500 Subject: [PATCH] Retire repo Depends-On: https://review.opendev.org/720892 Change-Id: I1ad1d98f366e28b1321d6d6c5c8a60073ffde1ef --- .gitignore | 2 - Gemfile | 15 - LICENSE | 202 ---- README.md | 3 - README.rst | 9 + Rakefile | 8 - bindep.txt | 11 - manifests/init.pp | 102 -- manifests/params.pp | 25 - metadata.json | 11 - spec/acceptance/nodesets/default.yml | 11 - spec/acceptance/nodesets/nodepool-centos7.yml | 10 - spec/acceptance/nodesets/nodepool-trusty.yml | 10 - templates/aliases.erb | 21 - templates/exim.sysconfig.erb | 2 - templates/exim4.conf.erb | 935 ------------------ templates/exim4.default.erb | 22 - 17 files changed, 9 insertions(+), 1390 deletions(-) delete mode 100644 .gitignore delete mode 100644 Gemfile delete mode 100644 LICENSE delete mode 100644 README.md create mode 100644 README.rst delete mode 100644 Rakefile delete mode 100644 bindep.txt delete mode 100644 manifests/init.pp delete mode 100644 manifests/params.pp delete mode 100644 metadata.json delete mode 100644 spec/acceptance/nodesets/default.yml delete mode 100644 spec/acceptance/nodesets/nodepool-centos7.yml delete mode 100644 spec/acceptance/nodesets/nodepool-trusty.yml delete mode 100644 templates/aliases.erb delete mode 100644 templates/exim.sysconfig.erb delete mode 100644 templates/exim4.conf.erb delete mode 100644 templates/exim4.default.erb diff --git a/.gitignore b/.gitignore deleted file mode 100644 index dade81e..0000000 --- a/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -Gemfile.lock -.bundled_gems/ diff --git a/Gemfile b/Gemfile deleted file mode 100644 index 019213a..0000000 --- a/Gemfile +++ /dev/null @@ -1,15 +0,0 @@ -source 'https://rubygems.org' - -if File.exists?('/home/zuul/src/git.openstack.org/openstack-infra/puppet-openstack_infra_spec_helper') - gem_checkout_method = {:path => '/home/zuul/src/git.openstack.org/openstack-infra/puppet-openstack_infra_spec_helper'} -else - gem_checkout_method = {:git => 'https://git.openstack.org/openstack-infra/puppet-openstack_infra_spec_helper'} -end -gem_checkout_method[:require] = false - -group :development, :test, :system_tests do - gem 'puppet-openstack_infra_spec_helper', - gem_checkout_method -end - -# vim:ft=ruby diff --git a/LICENSE b/LICENSE deleted file mode 100644 index d645695..0000000 --- a/LICENSE +++ /dev/null @@ -1,202 +0,0 @@ - - Apache License - Version 2.0, January 2004 - http://www.apache.org/licenses/ - - TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION - - 1. Definitions. - - "License" shall mean the terms and conditions for use, reproduction, - and distribution as defined by Sections 1 through 9 of this document. - - "Licensor" shall mean the copyright owner or entity authorized by - the copyright owner that is granting the License. - - "Legal Entity" shall mean the union of the acting entity and all - other entities that control, are controlled by, or are under common - control with that entity. For the purposes of this definition, - "control" means (i) the power, direct or indirect, to cause the - direction or management of such entity, whether by contract or - otherwise, or (ii) ownership of fifty percent (50%) or more of the - outstanding shares, or (iii) beneficial ownership of such entity. - - "You" (or "Your") shall mean an individual or Legal Entity - exercising permissions granted by this License. - - "Source" form shall mean the preferred form for making modifications, - including but not limited to software source code, documentation - source, and configuration files. - - "Object" form shall mean any form resulting from mechanical - transformation or translation of a Source form, including but - not limited to compiled object code, generated documentation, - and conversions to other media types. - - "Work" shall mean the work of authorship, whether in Source or - Object form, made available under the License, as indicated by a - copyright notice that is included in or attached to the work - (an example is provided in the Appendix below). - - "Derivative Works" shall mean any work, whether in Source or Object - form, that is based on (or derived from) the Work and for which the - editorial revisions, annotations, elaborations, or other modifications - represent, as a whole, an original work of authorship. For the purposes - of this License, Derivative Works shall not include works that remain - separable from, or merely link (or bind by name) to the interfaces of, - the Work and Derivative Works thereof. - - "Contribution" shall mean any work of authorship, including - the original version of the Work and any modifications or additions - to that Work or Derivative Works thereof, that is intentionally - submitted to Licensor for inclusion in the Work by the copyright owner - or by an individual or Legal Entity authorized to submit on behalf of - the copyright owner. For the purposes of this definition, "submitted" - means any form of electronic, verbal, or written communication sent - to the Licensor or its representatives, including but not limited to - communication on electronic mailing lists, source code control systems, - and issue tracking systems that are managed by, or on behalf of, the - Licensor for the purpose of discussing and improving the Work, but - excluding communication that is conspicuously marked or otherwise - designated in writing by the copyright owner as "Not a Contribution." - - "Contributor" shall mean Licensor and any individual or Legal Entity - on behalf of whom a Contribution has been received by Licensor and - subsequently incorporated within the Work. - - 2. Grant of Copyright License. Subject to the terms and conditions of - this License, each Contributor hereby grants to You a perpetual, - worldwide, non-exclusive, no-charge, royalty-free, irrevocable - copyright license to reproduce, prepare Derivative Works of, - publicly display, publicly perform, sublicense, and distribute the - Work and such Derivative Works in Source or Object form. - - 3. Grant of Patent License. Subject to the terms and conditions of - this License, each Contributor hereby grants to You a perpetual, - worldwide, non-exclusive, no-charge, royalty-free, irrevocable - (except as stated in this section) patent license to make, have made, - use, offer to sell, sell, import, and otherwise transfer the Work, - where such license applies only to those patent claims licensable - by such Contributor that are necessarily infringed by their - Contribution(s) alone or by combination of their Contribution(s) - with the Work to which such Contribution(s) was submitted. If You - institute patent litigation against any entity (including a - cross-claim or counterclaim in a lawsuit) alleging that the Work - or a Contribution incorporated within the Work constitutes direct - or contributory patent infringement, then any patent licenses - granted to You under this License for that Work shall terminate - as of the date such litigation is filed. - - 4. Redistribution. You may reproduce and distribute copies of the - Work or Derivative Works thereof in any medium, with or without - modifications, and in Source or Object form, provided that You - meet the following conditions: - - (a) You must give any other recipients of the Work or - Derivative Works a copy of this License; and - - (b) You must cause any modified files to carry prominent notices - stating that You changed the files; and - - (c) You must retain, in the Source form of any Derivative Works - that You distribute, all copyright, patent, trademark, and - attribution notices from the Source form of the Work, - excluding those notices that do not pertain to any part of - the Derivative Works; and - - (d) If the Work includes a "NOTICE" text file as part of its - distribution, then any Derivative Works that You distribute must - include a readable copy of the attribution notices contained - within such NOTICE file, excluding those notices that do not - pertain to any part of the Derivative Works, in at least one - of the following places: within a NOTICE text file distributed - as part of the Derivative Works; within the Source form or - documentation, if provided along with the Derivative Works; or, - within a display generated by the Derivative Works, if and - wherever such third-party notices normally appear. The contents - of the NOTICE file are for informational purposes only and - do not modify the License. You may add Your own attribution - notices within Derivative Works that You distribute, alongside - or as an addendum to the NOTICE text from the Work, provided - that such additional attribution notices cannot be construed - as modifying the License. - - You may add Your own copyright statement to Your modifications and - may provide additional or different license terms and conditions - for use, reproduction, or distribution of Your modifications, or - for any such Derivative Works as a whole, provided Your use, - reproduction, and distribution of the Work otherwise complies with - the conditions stated in this License. - - 5. Submission of Contributions. Unless You explicitly state otherwise, - any Contribution intentionally submitted for inclusion in the Work - by You to the Licensor shall be under the terms and conditions of - this License, without any additional terms or conditions. - Notwithstanding the above, nothing herein shall supersede or modify - the terms of any separate license agreement you may have executed - with Licensor regarding such Contributions. - - 6. Trademarks. This License does not grant permission to use the trade - names, trademarks, service marks, or product names of the Licensor, - except as required for reasonable and customary use in describing the - origin of the Work and reproducing the content of the NOTICE file. - - 7. Disclaimer of Warranty. Unless required by applicable law or - agreed to in writing, Licensor provides the Work (and each - Contributor provides its Contributions) on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or - implied, including, without limitation, any warranties or conditions - of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A - PARTICULAR PURPOSE. You are solely responsible for determining the - appropriateness of using or redistributing the Work and assume any - risks associated with Your exercise of permissions under this License. - - 8. Limitation of Liability. In no event and under no legal theory, - whether in tort (including negligence), contract, or otherwise, - unless required by applicable law (such as deliberate and grossly - negligent acts) or agreed to in writing, shall any Contributor be - liable to You for damages, including any direct, indirect, special, - incidental, or consequential damages of any character arising as a - result of this License or out of the use or inability to use the - Work (including but not limited to damages for loss of goodwill, - work stoppage, computer failure or malfunction, or any and all - other commercial damages or losses), even if such Contributor - has been advised of the possibility of such damages. - - 9. Accepting Warranty or Additional Liability. While redistributing - the Work or Derivative Works thereof, You may choose to offer, - and charge a fee for, acceptance of support, warranty, indemnity, - or other liability obligations and/or rights consistent with this - License. However, in accepting such obligations, You may act only - on Your own behalf and on Your sole responsibility, not on behalf - of any other Contributor, and only if You agree to indemnify, - defend, and hold each Contributor harmless for any liability - incurred by, or claims asserted against, such Contributor by reason - of your accepting any such warranty or additional liability. - - END OF TERMS AND CONDITIONS - - APPENDIX: How to apply the Apache License to your work. - - To apply the Apache License to your work, attach the following - boilerplate notice, with the fields enclosed by brackets "[]" - replaced with your own identifying information. (Don't include - the brackets!) The text should be enclosed in the appropriate - comment syntax for the file format. We also recommend that a - file or class name and description of purpose be included on the - same "printed page" as the copyright notice for easier - identification within third-party archives. - - Copyright [yyyy] [name of copyright owner] - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. diff --git a/README.md b/README.md deleted file mode 100644 index bbc432f..0000000 --- a/README.md +++ /dev/null @@ -1,3 +0,0 @@ -# OpenStack Exim Module - -This module installs and configures exim diff --git a/README.rst b/README.rst new file mode 100644 index 0000000..c4ba6c6 --- /dev/null +++ b/README.rst @@ -0,0 +1,9 @@ +This project is no longer maintained. + +The contents of this repository are still available in the Git +source code management system. To see the contents of this +repository before it reached its end of life, please check out the +previous commit with "git checkout HEAD^1". + +For any further questions, please email +service-discuss@lists.opendev.org or join #opendev on Freenode. diff --git a/Rakefile b/Rakefile deleted file mode 100644 index ff1f0d7..0000000 --- a/Rakefile +++ /dev/null @@ -1,8 +0,0 @@ -require 'rubygems' -require 'puppetlabs_spec_helper/rake_tasks' -require 'puppet-lint/tasks/puppet-lint' -PuppetLint.configuration.fail_on_warnings = true -PuppetLint.configuration.send('disable_80chars') -PuppetLint.configuration.send('disable_autoloader_layout') -PuppetLint.configuration.send('disable_class_inherits_from_params_class') -PuppetLint.configuration.send('disable_class_parameter_defaults') diff --git a/bindep.txt b/bindep.txt deleted file mode 100644 index 7cdd58e..0000000 --- a/bindep.txt +++ /dev/null @@ -1,11 +0,0 @@ -# This is a cross-platform list tracking distribution packages needed by tests; -# see http://docs.openstack.org/infra/bindep/ for additional information. - -libxml2-devel [test platform:rpm] -libxml2-dev [test platform:dpkg] -libxslt-devel [test platform:rpm] -libxslt1-dev [test platform:dpkg] -ruby-devel [test platform:rpm] -ruby-dev [test platform:dpkg] -zlib1g-dev [test platform:dpkg] -zlib-devel [test platform:rpm] diff --git a/manifests/init.pp b/manifests/init.pp deleted file mode 100644 index b7249dc..0000000 --- a/manifests/init.pp +++ /dev/null @@ -1,102 +0,0 @@ -# The 'routers' and 'transports' parameters are lists of hashes of -# hashes. Each entry of the outer hash corresponds to a single router -# or transport definition, with the key being the name of the router -# or transport. The inner hash is a set of options for that router or -# transport which are set verbatim, except that 'flag' options (where -# Exim expects merely the presence or absence of the option with no -# value associated) are passed in as booleans, where a value of true -# means the option should be present. E.g.: -# -# routers => [ -# {'storyboard' => { -# 'driver' => 'redirect', -# 'local_parts' => 'storyboard', -# 'local_part_suffix_optional' => true, -# 'local_part_suffix' => '-bounces : -bounces+*', -# 'data' => ':blackhole:', -# }} -# ] -# -# For the current Exim configuration, see: -# http://www.exim.org/exim-html-current/doc/html/spec_html/index.html - -class exim( - $local_domains = '@', - $mailman_domains = [], - $queue_interval = '30m', - $queue_run_max = '5', - $queue_smtp_domains = undef, - $routers = [], - $default_localuser_router = true, - $smarthost = false, - $sysadmins = [], - $transports = [], - $smtp_accept_max = undef, - $smtp_accept_max_per_host = undef, - $extra_aliases = {}, -) { - - include ::exim::params - - package { $::exim::params::package: - ensure => present, - } - - if ($::osfamily == 'RedHat') { - service { 'postfix': - ensure => stopped - } - file { $::exim::params::sysdefault_file: - ensure => present, - content => template("${module_name}/exim.sysconfig.erb"), - group => 'root', - mode => '0444', - owner => 'root', - replace => true, - require => Package[$::exim::params::package], - } - } - - if ($::osfamily == 'Debian') { - file { $::exim::params::sysdefault_file: - ensure => present, - content => template("${module_name}/exim4.default.erb"), - group => 'root', - mode => '0444', - owner => 'root', - replace => true, - require => Package[$::exim::params::package], - } - } - - service { $::exim::params::service_name: - ensure => running, - hasrestart => true, - subscribe => [ - File[$::exim::params::config_file], - File[$::exim::params::sysdefault_file], - ], - require => Package[$::exim::params::package], - } - - file { $::exim::params::config_file: - ensure => present, - content => template("${module_name}/exim4.conf.erb"), - group => 'root', - mode => '0444', - owner => 'root', - replace => true, - require => Package[$::exim::params::package], - } - - file { '/etc/aliases': - ensure => present, - content => template("${module_name}/aliases.erb"), - group => 'root', - mode => '0444', - owner => 'root', - replace => true, - } -} - -# vim:sw=2:ts=2:expandtab:textwidth=79 diff --git a/manifests/params.pp b/manifests/params.pp deleted file mode 100644 index 311ab39..0000000 --- a/manifests/params.pp +++ /dev/null @@ -1,25 +0,0 @@ -# Class: exim::params -# -# This class holds parameters that need to be -# accessed by other classes. -class exim::params { - case $::osfamily { - 'RedHat': { - $package = 'exim' - $service_name = 'exim' - $config_file = '/etc/exim/exim.conf' - $conf_dir = '/etc/exim/' - $sysdefault_file = '/etc/sysconfig/exim' - } - 'Debian': { - $package = 'exim4-daemon-light' - $service_name = 'exim4' - $config_file = '/etc/exim4/exim4.conf' - $conf_dir = '/etc/exim4' - $sysdefault_file = '/etc/default/exim4' - } - default: { - fail("Unsupported osfamily: ${::osfamily} The 'exim' module only supports osfamily Debian or RedHat (slaves only).") - } - } -} diff --git a/metadata.json b/metadata.json deleted file mode 100644 index 3d024a7..0000000 --- a/metadata.json +++ /dev/null @@ -1,11 +0,0 @@ -{ - "name": "openstackinfra-exim", - "version": "0.0.1", - "author": "Openstack CI", - "summary": "Puppet module for Exim", - "license": "Apache 2.0", - "source": "https://git.openstack.org/openstack-infra/puppet-exim.git", - "project_page": "http://docs.openstack.org/infra/system-config/", - "issues_url": "https://storyboard.openstack.org/#!/project/780", - "dependencies": [] -} diff --git a/spec/acceptance/nodesets/default.yml b/spec/acceptance/nodesets/default.yml deleted file mode 100644 index 3bb3e62..0000000 --- a/spec/acceptance/nodesets/default.yml +++ /dev/null @@ -1,11 +0,0 @@ -HOSTS: - ubuntu-server-1404-x64: - roles: - - master - platform: ubuntu-14.04-amd64 - box: puppetlabs/ubuntu-14.04-64-nocm - box_url: https://vagrantcloud.com/puppetlabs/ubuntu-14.04-64-nocm - hypervisor: vagrant -CONFIG: - log_level: debug - type: git diff --git a/spec/acceptance/nodesets/nodepool-centos7.yml b/spec/acceptance/nodesets/nodepool-centos7.yml deleted file mode 100644 index c552874..0000000 --- a/spec/acceptance/nodesets/nodepool-centos7.yml +++ /dev/null @@ -1,10 +0,0 @@ -HOSTS: - centos-70-x64: - roles: - - master - platform: el-7-x86_64 - hypervisor: none - ip: 127.0.0.1 -CONFIG: - type: foss - set_env: false diff --git a/spec/acceptance/nodesets/nodepool-trusty.yml b/spec/acceptance/nodesets/nodepool-trusty.yml deleted file mode 100644 index 9fc624e..0000000 --- a/spec/acceptance/nodesets/nodepool-trusty.yml +++ /dev/null @@ -1,10 +0,0 @@ -HOSTS: - ubuntu-14.04-amd64: - roles: - - master - platform: ubuntu-14.04-amd64 - hypervisor: none - ip: 127.0.0.1 -CONFIG: - type: foss - set_env: false diff --git a/templates/aliases.erb b/templates/aliases.erb deleted file mode 100644 index 8b7e4a4..0000000 --- a/templates/aliases.erb +++ /dev/null @@ -1,21 +0,0 @@ -# /etc/aliases -<% @extra_aliases.each do |key,value| -%> -<%= key %>: <%= value %> -<% end -%> - -mailer-daemon: postmaster -postmaster: root -nobody: root -hostmaster: root -usenet: root -news: root -webmaster: root -www: root -ftp: root -abuse: root -noc: root -security: root - -<% if @sysadmins.length > 0 -%> -root: <%= @sysadmins.join(",") %> -<% end -%> diff --git a/templates/exim.sysconfig.erb b/templates/exim.sysconfig.erb deleted file mode 100644 index 7e2a691..0000000 --- a/templates/exim.sysconfig.erb +++ /dev/null @@ -1,2 +0,0 @@ -DAEMON=yes -QUEUE=<%= @queue_interval %> diff --git a/templates/exim4.conf.erb b/templates/exim4.conf.erb deleted file mode 100644 index d5f23fa..0000000 --- a/templates/exim4.conf.erb +++ /dev/null @@ -1,935 +0,0 @@ -# $Cambridge: exim/exim-src/src/configure.default,v 1.14 2009/10/16 07:46:13 tom Exp $ - -###################################################################### -# Runtime configuration file for Exim # -###################################################################### - - -# This is a default configuration file which will operate correctly in -# uncomplicated installations. Please see the manual for a complete list -# of all the runtime configuration options that can be included in a -# configuration file. There are many more than are mentioned here. The -# manual is in the file doc/spec.txt in the Exim distribution as a plain -# ASCII file. Other formats (PostScript, Texinfo, HTML, PDF) are available -# from the Exim ftp sites. The manual is also online at the Exim web sites. - - -# This file is divided into several parts, all but the first of which are -# headed by a line starting with the word "begin". Only those parts that -# are required need to be present. Blank lines, and lines starting with # -# are ignored. - - -########### IMPORTANT ########## IMPORTANT ########### IMPORTANT ########### -# # -# Whenever you change Exim's configuration file, you *must* remember to # -# HUP the Exim daemon, because it will not pick up the new configuration # -# until you do. However, any other Exim processes that are started, for # -# example, a process started by an MUA in order to send a message, will # -# see the new configuration as soon as it is in place. # -# # -# You do not need to HUP the daemon for changes in auxiliary files that # -# are referenced from this file. They are read every time they are used. # -# # -# It is usually a good idea to test a new configuration for syntactic # -# correctness before installing it (for example, by running the command # -# "exim -C /config/file.new -bV"). # -# # -########### IMPORTANT ########## IMPORTANT ########### IMPORTANT ########### - -CONFDIR = <%= scope.lookupvar('exim::params::conf_dir') %> - - -###################################################################### -# MAIN CONFIGURATION SETTINGS # -###################################################################### - -# This is the default value now, but we need to explicitly set it to -# the empty string to avoid exim emitting a warning message. -# See https://tronche.com/wiki/Exim_keep_environment -keep_environment = - -# Specify your host's canonical name here. This should normally be the fully -# qualified "official" name of your host. If this option is not set, the -# uname() function is called to obtain the name. In many cases this does -# the right thing and you need not set anything explicitly. - -# primary_hostname = - -# The next three settings create two lists of domains and one list of hosts. -# These lists are referred to later in this configuration using the syntax -# +local_domains, +relay_to_domains, and +relay_from_hosts, respectively. They -# are all colon-separated lists: - -domainlist local_domains = <%= @local_domains %><% if @mailman_domains.length > 0 -%>:<%= @mailman_domains.join(":") %><% end %> -domainlist relay_to_domains = -hostlist relay_from_hosts = 127.0.0.1 - -# Most straightforward access control requirements can be obtained by -# appropriate settings of the above options. In more complicated situations, -# you may need to modify the Access Control Lists (ACLs) which appear later in -# this file. - -# The first setting specifies your local domains, for example: -# -# domainlist local_domains = my.first.domain : my.second.domain -# -# You can use "@" to mean "the name of the local host", as in the default -# setting above. This is the name that is specified by primary_hostname, -# as specified above (or defaulted). If you do not want to do any local -# deliveries, remove the "@" from the setting above. If you want to accept mail -# addressed to your host's literal IP address, for example, mail addressed to -# "user@[192.168.23.44]", you can add "@[]" as an item in the local domains -# list. You also need to uncomment "allow_domain_literals" below. This is not -# recommended for today's Internet. - -# The second setting specifies domains for which your host is an incoming relay. -# If you are not doing any relaying, you should leave the list empty. However, -# if your host is an MX backup or gateway of some kind for some domains, you -# must set relay_to_domains to match those domains. For example: -# -# domainlist relay_to_domains = *.myco.com : my.friend.org -# -# This will allow any host to relay through your host to those domains. -# See the section of the manual entitled "Control of relaying" for more -# information. - -# The third setting specifies hosts that can use your host as an outgoing relay -# to any other host on the Internet. Such a setting commonly refers to a -# complete local network as well as the localhost. For example: -# -# hostlist relay_from_hosts = 127.0.0.1 : 192.168.0.0/16 -# -# The "/16" is a bit mask (CIDR notation), not a number of hosts. Note that you -# have to include 127.0.0.1 if you want to allow processes on your host to send -# SMTP mail by using the loopback address. A number of MUAs use this method of -# sending mail. - -# All three of these lists may contain many different kinds of item, including -# wildcarded names, regular expressions, and file lookups. See the reference -# manual for details. The lists above are used in the access control lists for -# checking incoming messages. The names of these ACLs are defined here: - -acl_smtp_rcpt = acl_check_rcpt -acl_smtp_data = acl_check_data - -# You should not change those settings until you understand how ACLs work. - - -# If you are running a version of Exim that was compiled with the content- -# scanning extension, you can cause incoming messages to be automatically -# scanned for viruses. You have to modify the configuration in two places to -# set this up. The first of them is here, where you define the interface to -# your scanner. This example is typical for ClamAV; see the manual for details -# of what to set for other virus scanners. The second modification is in the -# acl_check_data access control list (see below). - -# av_scanner = clamd:/tmp/clamd - - -# For spam scanning, there is a similar option that defines the interface to -# SpamAssassin. You do not need to set this if you are using the default, which -# is shown in this commented example. As for virus scanning, you must also -# modify the acl_check_data access control list to enable spam scanning. - -# spamd_address = 127.0.0.1 783 - - -# If Exim is compiled with support for TLS, you may want to enable the -# following options so that Exim allows clients to make encrypted -# connections. In the authenticators section below, there are template -# configurations for plaintext username/password authentication. This kind -# of authentication is only safe when used within a TLS connection, so the -# authenticators will only work if the following TLS settings are turned on -# as well. - -# Allow any client to use TLS. - -#tls_advertise_hosts = * - -# Specify the location of the Exim server's TLS certificate and private key. -# The private key must not be encrypted (password protected). You can put -# the certificate and private key in the same file, in which case you only -# need the first setting, or in separate files, in which case you need both -# options. - -# tls_certificate = /etc/ssl/exim.crt -# tls_privatekey = /etc/ssl/exim.pem - -# In order to support roaming users who wish to send email from anywhere, -# you may want to make Exim listen on other ports as well as port 25, in -# case these users need to send email from a network that blocks port 25. -# The standard port for this purpose is port 587, the "message submission" -# port. See RFC 4409 for details. Microsoft MUAs cannot be configured to -# talk the message submission protocol correctly, so if you need to support -# them you should also allow TLS-on-connect on the traditional but -# non-standard port 465. - -# daemon_smtp_ports = 25 : 465 : 587 -# tls_on_connect_ports = 465 - -# Specify the domain you want to be added to all unqualified addresses -# here. An unqualified address is one that does not contain an "@" character -# followed by a domain. For example, "caesar@rome.example" is a fully qualified -# address, but the string "caesar" (i.e. just a login name) is an unqualified -# email address. Unqualified addresses are accepted only from local callers by -# default. See the recipient_unqualified_hosts option if you want to permit -# unqualified addresses from remote sources. If this option is not set, the -# primary_hostname value is used for qualification. - -# qualify_domain = - - -# If you want unqualified recipient addresses to be qualified with a different -# domain to unqualified sender addresses, specify the recipient domain here. -# If this option is not set, the qualify_domain value is used. - -# qualify_recipient = - - -# The following line must be uncommented if you want Exim to recognize -# addresses of the form "user@[10.11.12.13]" that is, with a "domain literal" -# (an IP address) instead of a named domain. The RFCs still require this form, -# but it makes little sense to permit mail to be sent to specific hosts by -# their IP address in the modern Internet. This ancient format has been used -# by those seeking to abuse hosts by using them for unwanted relaying. If you -# really do want to support domain literals, uncomment the following line, and -# see also the "domain_literal" router below. - -# allow_domain_literals - - -# No deliveries will ever be run under the uids of users specified by -# never_users (a colon-separated list). An attempt to do so causes a panic -# error to be logged, and the delivery to be deferred. This is a paranoic -# safety catch. There is an even stronger safety catch in the form of the -# FIXED_NEVER_USERS setting in the configuration for building Exim. The list of -# users that it specifies is built into the binary, and cannot be changed. The -# option below just adds additional users to the list. The default for -# FIXED_NEVER_USERS is "root", but just to be absolutely sure, the default here -# is also "root". - -# Note that the default setting means you cannot deliver mail addressed to root -# as if it were a normal user. This isn't usually a problem, as most sites have -# an alias for root that redirects such mail to a human administrator. - -never_users = root - - -# The setting below causes Exim to do a reverse DNS lookup on all incoming -# IP calls, in order to get the true host name. If you feel this is too -# expensive, you can specify the networks for which a lookup is done, or -# remove the setting entirely. - -host_lookup = * - - -# The settings below, which are actually the same as the defaults in the -# code, cause Exim to make RFC 1413 (ident) callbacks for all incoming SMTP -# calls. You can limit the hosts to which these calls are made, and/or change -# the timeout that is used. If you set the timeout to zero, all RFC 1413 calls -# are disabled. RFC 1413 calls are cheap and can provide useful information -# for tracing problem messages, but some hosts and firewalls have problems -# with them. This can result in a timeout instead of an immediate refused -# connection, leading to delays on starting up SMTP sessions. (The default was -# reduced from 30s to 5s for release 4.61.) - -rfc1413_hosts = * -rfc1413_query_timeout = 0s - - -# By default, Exim expects all envelope addresses to be fully qualified, that -# is, they must contain both a local part and a domain. If you want to accept -# unqualified addresses (just a local part) from certain hosts, you can specify -# these hosts by setting one or both of -# -# sender_unqualified_hosts = -# recipient_unqualified_hosts = -# -# to control sender and recipient addresses, respectively. When this is done, -# unqualified addresses are qualified using the settings of qualify_domain -# and/or qualify_recipient (see above). - - -# If you want Exim to support the "percent hack" for certain domains, -# uncomment the following line and provide a list of domains. The "percent -# hack" is the feature by which mail addressed to x%y@z (where z is one of -# the domains listed) is locally rerouted to x@y and sent on. If z is not one -# of the "percent hack" domains, x%y is treated as an ordinary local part. This -# hack is rarely needed nowadays; you should not enable it unless you are sure -# that you really need it. -# -# percent_hack_domains = -# -# As well as setting this option you will also need to remove the test -# for local parts containing % in the ACL definition below. - - -# When Exim can neither deliver a message nor return it to sender, it "freezes" -# the delivery error message (aka "bounce message"). There are also other -# circumstances in which messages get frozen. They will stay on the queue for -# ever unless one of the following options is set. - -# This option unfreezes frozen bounce messages after two days, tries -# once more to deliver them, and ignores any delivery failures. - -ignore_bounce_errors_after = 2d - -# This option cancels (removes) frozen messages that are older than a week. - -timeout_frozen_after = 7d - - -# By default, messages that are waiting on Exim's queue are all held in a -# single directory called "input" which it itself within Exim's spool -# directory. (The default spool directory is specified when Exim is built, and -# is often /var/spool/exim/.) Exim works best when its queue is kept short, but -# there are circumstances where this is not always possible. If you uncomment -# the setting below, messages on the queue are held in 62 subdirectories of -# "input" instead of all in the same directory. The subdirectories are called -# 0, 1, ... A, B, ... a, b, ... z. This has two benefits: (1) If your file -# system degrades with many files in one directory, this is less likely to -# happen; (2) Exim can process the queue one subdirectory at a time instead of -# all at once, which can give better performance with large queues. - -# split_spool_directory = true - -# This controls the maximum number of queue runner processes that an -# Exim daemon can run simultaneously. This does not mean that it -# starts them all at once, but rather that if the maximum number are -# still running when the time comes to start another one, it refrains -# from starting another one. This can happen with very large queues -# and/or very sluggish deliveries. This option does not, however, -# interlock with other processes, so additional queue runners can be -# started by other means, or by killing and restarting the daemon. - -queue_run_max = <%= @queue_run_max %> - -# When this option is set, a delivery process is started whenever a -# message is received, routing is performed, and local deliveries take -# place. However, if any SMTP deliveries are required for domains that -# match queue_smtp_domains, they are not immediately delivered, but -# instead the message waits on the queue for the next queue run. Since -# routing of the message has taken place, Exim knows to which remote -# hosts it must be delivered, and so when the queue run happens, -# multiple messages for the same host are delivered over a single SMTP -# connection. The -odqs command line option causes all SMTP deliveries -# to be queued in this way, and is equivalent to setting -# queue_smtp_domains to "*". See also hold_domains and queue_domains. - -<% unless ["", nil, :undef].include?(@queue_smtp_domains) -%> -queue_smtp_domains = <%= @queue_smtp_domains %> -<% end -%> - -<% if @mailman_domains.length > 0 -%> -# Home dir for your Mailman installation -- aka Mailman's prefix -# directory. -MM_HOME=/var/lib/mailman -# -# User and group for Mailman, should match your --with-mail-gid -# switch to Mailman's configure script. -# Value is normally "mailman" -MM_UID=list -MM_GID=list -# -# Domains that your lists are in - colon separated list -# you may wish to add these into local_domains as well -domainlist mm_domains=<%= @mailman_domains.join(":") %> -# -# -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= -# -# These values are derived from the ones above and should not need -# editing unless you have munged your mailman installation -# -# The path of the Mailman mail wrapper script -MM_WRAP=MM_HOME/mail/mailman -# -# The path of the list config file (used as a required file when -# verifying list addresses) -MM_LISTCHK=MM_HOME/lists/${lc::$local_part}/config.pck -<% end -%> - -# Google is way behind the times on IPv6 and tends to reject mail from -# new v6 addrs: - -dns_ipv4_lookup = *.gmail.com : *.google.com - -<% unless ["", nil, :undef].include?(@smtp_accept_max) -%> -# simultaneous incoming connections -smtp_accept_max = <%= @smtp_accept_max %> -<% end -%> - -<% unless ["", nil, :undef].include?(@smtp_accept_max_per_host) -%> -# connections from one host -smtp_accept_max_per_host = <%= @smtp_accept_max_per_host %> -<% end -%> - -###################################################################### -# ACL CONFIGURATION # -# Specifies access control lists for incoming SMTP mail # -###################################################################### - -begin acl - -# This access control list is used for every RCPT command in an incoming -# SMTP message. The tests are run in order until the address is either -# accepted or denied. - -acl_check_rcpt: - - # Accept if the source is local SMTP (i.e. not over TCP/IP). We do this by - # testing for an empty sending host field. - - accept hosts = : - control = dkim_disable_verify - - ############################################################################# - # The following section of the ACL is concerned with local parts that contain - # @ or % or ! or / or | or dots in unusual places. - # - # The characters other than dots are rarely found in genuine local parts, but - # are often tried by people looking to circumvent relaying restrictions. - # Therefore, although they are valid in local parts, these rules lock them - # out, as a precaution. - # - # Empty components (two dots in a row) are not valid in RFC 2822, but Exim - # allows them because they have been encountered. (Consider local parts - # constructed as "firstinitial.secondinitial.familyname" when applied to - # someone like me, who has no second initial.) However, a local part starting - # with a dot or containing /../ can cause trouble if it is used as part of a - # file name (e.g. for a mailing list). This is also true for local parts that - # contain slashes. A pipe symbol can also be troublesome if the local part is - # incorporated unthinkingly into a shell command line. - # - # Two different rules are used. The first one is stricter, and is applied to - # messages that are addressed to one of the local domains handled by this - # host. The line "domains = +local_domains" restricts it to domains that are - # defined by the "domainlist local_domains" setting above. The rule blocks - # local parts that begin with a dot or contain @ % ! / or |. If you have - # local accounts that include these characters, you will have to modify this - # rule. - - deny message = Restricted characters in address - domains = +local_domains - local_parts = ^[.] : ^.*[@%!/|] - - # The second rule applies to all other domains, and is less strict. The line - # "domains = !+local_domains" restricts it to domains that are NOT defined by - # the "domainlist local_domains" setting above. The exclamation mark is a - # negating operator. This rule allows your own users to send outgoing - # messages to sites that use slashes and vertical bars in their local parts. - # It blocks local parts that begin with a dot, slash, or vertical bar, but - # allows these characters within the local part. However, the sequence /../ - # is barred. The use of @ % and ! is blocked, as before. The motivation here - # is to prevent your users (or your users' viruses) from mounting certain - # kinds of attack on remote sites. - - deny message = Restricted characters in address - domains = !+local_domains - local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./ - ############################################################################# - - # Accept mail to postmaster in any local domain, regardless of the source, - # and without verifying the sender. - - accept local_parts = postmaster - domains = +local_domains - - # Deny unless the sender address can be verified. - - require verify = sender - - # Accept if the message arrived over an authenticated connection, from - # any host. Again, these messages are usually from MUAs, so recipient - # verification is omitted, and submission mode is set. And again, we do this - # check before any black list tests. - - accept authenticated = * - control = submission/domain= - control = dkim_disable_verify - - # Accept if the message comes from one of the hosts for which we are an - # outgoing relay. It is assumed that such hosts are most likely to be MUAs, - # so we set control=submission to make Exim treat the message as a - # submission. It will fix up various errors in the message, for example, the - # lack of a Date: header line. If you are actually relaying out out from - # MTAs, you may want to disable this. If you are handling both relaying from - # MTAs and submissions from MUAs you should probably split them into two - # lists, and handle them differently. - - # Recipient verification is omitted here, because in many cases the clients - # are dumb MUAs that don't cope well with SMTP error responses. If you are - # actually relaying out from MTAs, you should probably add recipient - # verification here. - - # Note that, by putting this test before any DNS black list checks, you will - # always accept from these hosts, even if they end up on a black list. The - # assumption is that they are your friends, and if they get onto a black - # list, it is a mistake. - - accept hosts = +relay_from_hosts - control = submission - control = dkim_disable_verify - - # In case people cargo-cult our Zuul configuration, only allow - # messages with an envelope sender of jenkins from OpenStack's Zuul. - - deny senders = jenkins@openstack.org - !hosts = zuul.openstack.org : 127.0.0.1 - message = Sender address not permitted from this host - - # Insist that any other recipient address that we accept is either in one of - # our local domains, or is in a domain for which we explicitly allow - # relaying. Any other domain is rejected as being unacceptable for relaying. - - require message = relay not permitted - domains = +local_domains : +relay_to_domains - - # We also require all accepted addresses to be verifiable. This check will - # do local part verification for local domains, but only check the domain - # for remote domains. The only way to check local parts for the remote - # relay domains is to use a callout (add /callout), but please read the - # documentation about callouts before doing this. - - require verify = recipient - - ############################################################################# - # There are no default checks on DNS black lists because the domains that - # contain these lists are changing all the time. However, here are two - # examples of how you can get Exim to perform a DNS black list lookup at this - # point. The first one denies, whereas the second just warns. - # - # deny message = rejected because $sender_host_address is in a black list at $dnslist_domain\n$dnslist_text - # dnslists = black.list.example - # - # warn dnslists = black.list.example - # add_header = X-Warning: $sender_host_address is in a black list at $dnslist_domain - # log_message = found in $dnslist_domain - ############################################################################# - - ############################################################################# - # This check is commented out because it is recognized that not every - # sysadmin will want to do it. If you enable it, the check performs - # Client SMTP Authorization (csa) checks on the sending host. These checks - # do DNS lookups for SRV records. The CSA proposal is currently (May 2005) - # an Internet draft. You can, of course, add additional conditions to this - # ACL statement to restrict the CSA checks to certain hosts only. - # - # require verify = csa - ############################################################################# - - # At this point, the address has passed all the checks that have been - # configured, so we accept it unconditionally. - - accept - - -# This ACL is used after the contents of a message have been received. This -# is the ACL in which you can test a message's headers or body, and in -# particular, this is where you can invoke external virus or spam scanners. -# Some suggested ways of configuring these tests are shown below, commented -# out. Without any tests, this ACL accepts all messages. If you want to use -# such tests, you must ensure that Exim is compiled with the content-scanning -# extension (WITH_CONTENT_SCAN=yes in Local/Makefile). - -acl_check_data: - - # Deny if the message contains a virus. Before enabling this check, you - # must install a virus scanner and set the av_scanner option above. - # - # deny malware = * - # message = This message contains a virus ($malware_name). - - # Add headers to a message if it is judged to be spam. Before enabling this, - # you must install SpamAssassin. You may also need to set the spamd_address - # option above. - # - # warn spam = nobody - # add_header = X-Spam_score: $spam_score\n\ - # X-Spam_score_int: $spam_score_int\n\ - # X-Spam_bar: $spam_bar\n\ - # X-Spam_report: $spam_report - - # In case people cargo-cult our Zuul configuration, only allow - # messages with a From header of jenkins from OpenStack's Zuul. - - deny condition = ${if eq{${address:$h_from:}}\ - {jenkins@openstack.org}} - !hosts = zuul.openstack.org : 127.0.0.1 - message = From address not permitted from this host - - # Accept the message. - - accept - - -###################################################################### -# ROUTERS CONFIGURATION # -# Specifies how addresses are handled # -###################################################################### -# THE ORDER IN WHICH THE ROUTERS ARE DEFINED IS IMPORTANT! # -# An address is passed to each router in turn until it is accepted. # -###################################################################### - -begin routers - -# This router routes to remote hosts over SMTP by explicit IP address, -# when an email address is given in "domain literal" form, for example, -# . The RFCs require this facility. However, it is -# little-known these days, and has been exploited by evil people seeking -# to abuse SMTP relays. Consequently it is commented out in the default -# configuration. If you uncomment this router, you also need to uncomment -# allow_domain_literals above, so that Exim can recognize the syntax of -# domain literal addresses. - -# domain_literal: -# driver = ipliteral -# domains = ! +local_domains -# transport = remote_smtp - - -# This router routes addresses that are not in local domains by doing a DNS -# lookup on the domain name. The exclamation mark that appears in "domains = ! -# +local_domains" is a negating operator, that is, it can be read as "not". The -# recipient's domain must not be one of those defined by "domainlist -# local_domains" above for this router to be used. -# -# If the router is used, any domain that resolves to 0.0.0.0 or to a loopback -# interface address (127.0.0.0/8) is treated as if it had no DNS entry. Note -# that 0.0.0.0 is the same as 0.0.0.0/32, which is commonly treated as the -# local host inside the network stack. It is not 0.0.0.0/0, the default route. -# If the DNS lookup fails, no further routers are tried because of the no_more -# setting, and consequently the address is unrouteable. - -<% if @smarthost -%> -smarthost: - driver = manualroute - domains = !+local_domains - transport = remote_smtp - route_list = * <%= @smarthost %> - no_more -<% else -%> -dnslookup: - driver = dnslookup - domains = ! +local_domains - transport = remote_smtp - ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 - no_more -<% end -%> - -# The remaining routers handle addresses in the local domain(s), that is those -# domains that are defined by "domainlist local_domains" above. - - -# This router handles aliasing using a linearly searched alias file with the -# name SYSTEM_ALIASES_FILE. When this configuration is installed automatically, -# the name gets inserted into this file from whatever is set in Exim's -# build-time configuration. The default path is the traditional /etc/aliases. -# If you install this configuration by hand, you need to specify the correct -# path in the "data" setting below. -# -##### NB You must ensure that the alias file exists. It used to be the case -##### NB that every Unix had that file, because it was the Sendmail default. -##### NB These days, there are systems that don't have it. Your aliases -##### NB file should at least contain an alias for "postmaster". -# -# If any of your aliases expand to pipes or files, you will need to set -# up a user and a group for these deliveries to run under. You can do -# this by uncommenting the "user" option below (changing the user name -# as appropriate) and adding a "group" option if necessary. Alternatively, you -# can specify "user" on the transports that are used. Note that the transports -# listed below are the same as are used for .forward files; you might want -# to set up different ones for pipe and file deliveries from aliases. - -system_aliases: - driver = redirect - allow_fail - allow_defer - data = ${lookup{$local_part}lsearch{/etc/aliases}} -# user = exim - file_transport = address_file - pipe_transport = address_pipe - -# .forward files are not supported --jeblair - -<% if @default_localuser_router == true -%> -# This router matches local user mailboxes. If the router fails, the error -# message is "Unknown user". - -# If you want this router to treat local parts with suffixes introduced by "-" -# or "+" characters as if the suffixes did not exist, uncomment the two local_ -# part_suffix options. Then, for example, xxxx-foo@your.domain will be treated -# in the same way as xxxx@your.domain by this router. - -localuser: - driver = accept - check_local_user -# local_part_suffix = +* : -* -# local_part_suffix_optional - transport = local_delivery - cannot_route_message = Unknown user -<% end -%> - -<% if @mailman_domains.length > 0 -%> -# Pick up on messages from our local mailman and route them via our -# special VERP-enabled transport -# -mailman_verp_router: -driver = dnslookup -# we only consider messages sent in through loopback -condition = ${if or{{eq{$sender_host_address}{127.0.0.1}} \ - {eq{$sender_host_address}{::1}}}{yes}{no}} -# we do not do this for traffic going to the local machine -domains = !+local_domains:!+mm_domains -ignore_target_hosts = <; 0.0.0.0; \ - 64.94.110.11; \ - 127.0.0.0/8; \ - ::1/128;fe80::/10;fe \ - c0::/10;ff00::/8 -# only the un-VERPed bounce addresses are handled -senders = "*-bounces@*" -transport = mailman_verp_smtp - -mailman_router: - driver = accept - domains = +mm_domains - require_files = MM_LISTCHK - local_part_suffix_optional - local_part_suffix = -admin : \ - -bounces : -bounces+* : \ - -confirm : -confirm+* : \ - -join : -leave : \ - -owner : -request : \ - -subscribe : -unsubscribe - transport = mailman_transport -<% end -%> - -<% @routers.each do |router| -%> -<% router.each_pair do |name, values| -%> - -<%= name %>: -<% if values.has_key?('driver') -%> - driver = <%= values['driver'] %> -<% end -%> -<% values.keys.sort.each do |k| -%> -<% if k != 'driver' -%> -<% if values[k] == true -%> - <%= k %> -<% else -%> - <%= k %> = <%= values[k] %> -<% end -%> -<% end -%> -<% end -%> -<% end -%> -<% end -%> - -###################################################################### -# TRANSPORTS CONFIGURATION # -###################################################################### -# ORDER DOES NOT MATTER # -# Only one appropriate transport is called for each delivery. # -###################################################################### - -# A transport is used only when referenced from a router that successfully -# handles an address. - -begin transports - - -# This transport is used for delivering messages over SMTP connections. - -remote_smtp: - driver = smtp - - -# This transport is used for local delivery to user mailboxes in traditional -# BSD mailbox format. By default it will be run under the uid and gid of the -# local user, and requires the sticky bit to be set on the /var/mail directory. -# Some systems use the alternative approach of running mail deliveries under a -# particular group instead of using the sticky bit. The commented options below -# show how this can be done. - -local_delivery: - driver = appendfile - file = /var/mail/$local_part - delivery_date_add - envelope_to_add - return_path_add - group = mail - mode = 0660 - - -# This transport is used for handling pipe deliveries generated by alias or -# .forward files. If the pipe generates any standard output, it is returned -# to the sender of the message as a delivery error. Set return_fail_output -# instead of return_output if you want this to happen only when the pipe fails -# to complete normally. You can set different transports for aliases and -# forwards if you want to - see the references to address_pipe in the routers -# section above. - -address_pipe: - driver = pipe - return_output - - -# This transport is used for handling deliveries directly to files that are -# generated by aliasing or forwarding. - -address_file: - driver = appendfile - delivery_date_add - envelope_to_add - return_path_add - - -# This transport is used for handling autoreplies generated by the filtering -# option of the userforward router. - -address_reply: - driver = autoreply - -<% if @mailman_domains.length > 0 -%> -mailman_transport: - driver = pipe - command = MM_WRAP \ - '${if def:local_part_suffix \ - {${sg{$local_part_suffix}{-(\\w+)(\\+.*)?}{\$1}}} \ - {post}}' \ - $local_part - current_directory = MM_HOME - home_directory = MM_HOME - user = MM_UID - group = MM_GID - -# Mailman VERP envelope sender address formatting. This seems not to use -# quoted-printable encoding of the address, but instead just replaces the -# '@' in the recipient address with '='. -# -mailman_verp_smtp: - driver = smtp -# put recipient address into return_path - return_path = \ - ${local_part:$return_path}+$local_part=$domain@${domain:$return_path} -# must restrict to one recipient at a time - max_rcpt = 1 -# Errors-To: may carry old return_path - headers_remove = Errors-To - headers_add = Errors-To: ${return_path} -<% end -%> - -<% @transports.each do |transport| -%> -<% transport.each_pair do |name, values| -%> - -<%= name %>: -<% if values.has_key?('driver') -%> - driver = <%= values['driver'] %> -<% end -%> -<% values.keys.sort.each do |k| -%> -<% if k != 'driver' -%> -<% if values[k] == true -%> - <%= k %> -<% else -%> - <%= k %> = <%= values[k] %> -<% end -%> -<% end -%> -<% end -%> -<% end -%> -<% end -%> - -###################################################################### -# RETRY CONFIGURATION # -###################################################################### - -begin retry - -# This single retry rule applies to all domains and all errors. It specifies -# retries every 15 minutes for 2 hours, then increasing retry intervals, -# starting at 1 hour and increasing each time by a factor of 1.5, up to 16 -# hours, then retries every 6 hours until 4 days have passed since the first -# failed delivery. - -# WARNING: If you do not have any retry rules at all (this section of the -# configuration is non-existent or empty), Exim will not do any retries of -# messages that fail to get delivered at the first attempt. The effect will -# be to treat temporary errors as permanent. Therefore, DO NOT remove this -# retry rule unless you really don't want any retries. - -# Address or Domain Error Retries -# ----------------- ----- ------- - -* * F,2h,15m; G,16h,1h,1.5; F,4d,6h - - - -###################################################################### -# REWRITE CONFIGURATION # -###################################################################### - -# There are no rewriting specifications in this default configuration file. - -begin rewrite - - - -###################################################################### -# AUTHENTICATION CONFIGURATION # -###################################################################### - -# The following authenticators support plaintext username/password -# authentication using the standard PLAIN mechanism and the traditional -# but non-standard LOGIN mechanism, with Exim acting as the server. -# PLAIN and LOGIN are enough to support most MUA software. -# -# These authenticators are not complete: you need to change the -# server_condition settings to specify how passwords are verified. -# They are set up to offer authentication to the client only if the -# connection is encrypted with TLS, so you also need to add support -# for TLS. See the global configuration options section at the start -# of this file for more about TLS. -# -# The default RCPT ACL checks for successful authentication, and will accept -# messages from authenticated users from anywhere on the Internet. - -begin authenticators - -# PLAIN authentication has no server prompts. The client sends its -# credentials in one lump, containing an authorization ID (which we do not -# use), an authentication ID, and a password. The latter two appear as -# $auth2 and $auth3 in the configuration and should be checked against a -# valid username and password. In a real configuration you would typically -# use $auth2 as a lookup key, and compare $auth3 against the result of the -# lookup, perhaps using the crypteq{}{} condition. - -#PLAIN: -# driver = plaintext -# server_set_id = $auth2 -# server_prompts = : -# server_condition = Authentication is not yet configured -# server_advertise_condition = ${if def:tls_cipher } - -# LOGIN authentication has traditional prompts and responses. There is no -# authorization ID in this mechanism, so unlike PLAIN the username and -# password are $auth1 and $auth2. Apart from that you can use the same -# server_condition setting for both authenticators. - -#LOGIN: -# driver = plaintext -# server_set_id = $auth1 -# server_prompts = <| Username: | Password: -# server_condition = Authentication is not yet configured -# server_advertise_condition = ${if def:tls_cipher } - -###################################################################### -# CONFIGURATION FOR local_scan() # -###################################################################### - -# If you have built Exim to include a local_scan() function that contains -# tables for private options, you can define those options here. Remember to -# uncomment the "begin" line. It is commented by default because it provokes -# an error with Exim binaries that are not built with LOCAL_SCAN_HAS_OPTIONS -# set in the Local/Makefile. - -# begin local_scan - - -# End of Exim configuration file diff --git a/templates/exim4.default.erb b/templates/exim4.default.erb deleted file mode 100644 index 39475d3..0000000 --- a/templates/exim4.default.erb +++ /dev/null @@ -1,22 +0,0 @@ -# /etc/default/exim4 -EX4DEF_VERSION='' - -# 'combined' - one daemon running queue and listening on SMTP port -# 'no' - no daemon running the queue -# 'separate' - two separate daemons -# 'ppp' - only run queue with /etc/ppp/ip-up.d/exim4. -# 'nodaemon' - no daemon is started at all. -# 'queueonly' - only a queue running daemon is started, no SMTP listener. -# setting this to 'no' will also disable queueruns from /etc/ppp/ip-up.d/exim4 -QUEUERUNNER='combined' -# how often should we run the queue -QUEUEINTERVAL='<%= @queue_interval %>' -# options common to quez-runner and listening daemon -COMMONOPTIONS='' -# more options for the daemon/process running the queue (applies to the one -# started in /etc/ppp/ip-up.d/exim4, too. -QUEUERUNNEROPTIONS='' -# special flags given to exim directly after the -q. See exim(8) -QFLAGS='' -# options for daemon listening on port 25 -SMTPLISTENEROPTIONS=''