From 9998655fa9ead66098b4a58273e24d6826ce5a69 Mon Sep 17 00:00:00 2001 From: Clark Boylan Date: Tue, 16 Nov 2021 14:40:15 -0800 Subject: [PATCH] Retire this project OpenDev is no longer running an openstackid instance and the puppet module isn't used by the folks running the current instance. We can go ahead and clean this repo up. Depends-On: https://review.opendev.org/c/openstack/project-config/+/818170 Change-Id: Ifab5aa7a839d8353aee9acacd5fd2eec525cc924 --- .gitignore | 3 - Gemfile | 15 - LICENSE | 202 -- README.md | 44 +- Rakefile | 8 - bindep.txt | 11 - files/deploy.sh | 39 - files/deployrc | 8 - files/functions | 293 --- files/php5/php-fpm.conf | 129 -- files/php5/php.ini | 1930 ----------------- files/php5/www.conf | 33 - files/php7/php-fpm.conf | 125 -- files/php7/php.ini | 1920 ---------------- files/php7/www.conf | 22 - manifests/deploy.pp | 53 - manifests/init.pp | 672 ------ metadata.json | 24 - spec/acceptance/nodesets/default.yml | 11 - spec/acceptance/nodesets/nodepool-centos7.yml | 10 - spec/acceptance/nodesets/nodepool-trusty.yml | 10 - spec/acceptance/nodesets/nodepool-xenial.yml | 10 - templates/.env.erb | 97 - templates/openstackid.conf.erb | 10 - templates/supervisor.conf.erb | 15 - templates/supervisor_watchdog.sh.erb | 12 - templates/vhost.erb | 87 - 27 files changed, 8 insertions(+), 5785 deletions(-) delete mode 100644 .gitignore delete mode 100644 Gemfile delete mode 100644 LICENSE delete mode 100644 Rakefile delete mode 100644 bindep.txt delete mode 100644 files/deploy.sh delete mode 100644 files/deployrc delete mode 100644 files/functions delete mode 100644 files/php5/php-fpm.conf delete mode 100644 files/php5/php.ini delete mode 100644 files/php5/www.conf delete mode 100644 files/php7/php-fpm.conf delete mode 100644 files/php7/php.ini delete mode 100644 files/php7/www.conf delete mode 100644 manifests/deploy.pp delete mode 100644 manifests/init.pp delete mode 100644 metadata.json delete mode 100644 spec/acceptance/nodesets/default.yml delete mode 100644 spec/acceptance/nodesets/nodepool-centos7.yml delete mode 100644 spec/acceptance/nodesets/nodepool-trusty.yml delete mode 100644 spec/acceptance/nodesets/nodepool-xenial.yml delete mode 100644 templates/.env.erb delete mode 100644 templates/openstackid.conf.erb delete mode 100644 templates/supervisor.conf.erb delete mode 100644 templates/supervisor_watchdog.sh.erb delete mode 100644 templates/vhost.erb diff --git a/.gitignore b/.gitignore deleted file mode 100644 index 60d0077..0000000 --- a/.gitignore +++ /dev/null @@ -1,3 +0,0 @@ -Gemfile.lock -.bundled_gems/ -.idea/ \ No newline at end of file diff --git a/Gemfile b/Gemfile deleted file mode 100644 index 019213a..0000000 --- a/Gemfile +++ /dev/null @@ -1,15 +0,0 @@ -source 'https://rubygems.org' - -if File.exists?('/home/zuul/src/git.openstack.org/openstack-infra/puppet-openstack_infra_spec_helper') - gem_checkout_method = {:path => '/home/zuul/src/git.openstack.org/openstack-infra/puppet-openstack_infra_spec_helper'} -else - gem_checkout_method = {:git => 'https://git.openstack.org/openstack-infra/puppet-openstack_infra_spec_helper'} -end -gem_checkout_method[:require] = false - -group :development, :test, :system_tests do - gem 'puppet-openstack_infra_spec_helper', - gem_checkout_method -end - -# vim:ft=ruby diff --git a/LICENSE b/LICENSE deleted file mode 100644 index d645695..0000000 --- a/LICENSE +++ /dev/null @@ -1,202 +0,0 @@ - - Apache License - Version 2.0, January 2004 - http://www.apache.org/licenses/ - - TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION - - 1. Definitions. - - "License" shall mean the terms and conditions for use, reproduction, - and distribution as defined by Sections 1 through 9 of this document. - - "Licensor" shall mean the copyright owner or entity authorized by - the copyright owner that is granting the License. - - "Legal Entity" shall mean the union of the acting entity and all - other entities that control, are controlled by, or are under common - control with that entity. For the purposes of this definition, - "control" means (i) the power, direct or indirect, to cause the - direction or management of such entity, whether by contract or - otherwise, or (ii) ownership of fifty percent (50%) or more of the - outstanding shares, or (iii) beneficial ownership of such entity. - - "You" (or "Your") shall mean an individual or Legal Entity - exercising permissions granted by this License. - - "Source" form shall mean the preferred form for making modifications, - including but not limited to software source code, documentation - source, and configuration files. - - "Object" form shall mean any form resulting from mechanical - transformation or translation of a Source form, including but - not limited to compiled object code, generated documentation, - and conversions to other media types. - - "Work" shall mean the work of authorship, whether in Source or - Object form, made available under the License, as indicated by a - copyright notice that is included in or attached to the work - (an example is provided in the Appendix below). - - "Derivative Works" shall mean any work, whether in Source or Object - form, that is based on (or derived from) the Work and for which the - editorial revisions, annotations, elaborations, or other modifications - represent, as a whole, an original work of authorship. For the purposes - of this License, Derivative Works shall not include works that remain - separable from, or merely link (or bind by name) to the interfaces of, - the Work and Derivative Works thereof. - - "Contribution" shall mean any work of authorship, including - the original version of the Work and any modifications or additions - to that Work or Derivative Works thereof, that is intentionally - submitted to Licensor for inclusion in the Work by the copyright owner - or by an individual or Legal Entity authorized to submit on behalf of - the copyright owner. For the purposes of this definition, "submitted" - means any form of electronic, verbal, or written communication sent - to the Licensor or its representatives, including but not limited to - communication on electronic mailing lists, source code control systems, - and issue tracking systems that are managed by, or on behalf of, the - Licensor for the purpose of discussing and improving the Work, but - excluding communication that is conspicuously marked or otherwise - designated in writing by the copyright owner as "Not a Contribution." - - "Contributor" shall mean Licensor and any individual or Legal Entity - on behalf of whom a Contribution has been received by Licensor and - subsequently incorporated within the Work. - - 2. Grant of Copyright License. Subject to the terms and conditions of - this License, each Contributor hereby grants to You a perpetual, - worldwide, non-exclusive, no-charge, royalty-free, irrevocable - copyright license to reproduce, prepare Derivative Works of, - publicly display, publicly perform, sublicense, and distribute the - Work and such Derivative Works in Source or Object form. - - 3. Grant of Patent License. Subject to the terms and conditions of - this License, each Contributor hereby grants to You a perpetual, - worldwide, non-exclusive, no-charge, royalty-free, irrevocable - (except as stated in this section) patent license to make, have made, - use, offer to sell, sell, import, and otherwise transfer the Work, - where such license applies only to those patent claims licensable - by such Contributor that are necessarily infringed by their - Contribution(s) alone or by combination of their Contribution(s) - with the Work to which such Contribution(s) was submitted. If You - institute patent litigation against any entity (including a - cross-claim or counterclaim in a lawsuit) alleging that the Work - or a Contribution incorporated within the Work constitutes direct - or contributory patent infringement, then any patent licenses - granted to You under this License for that Work shall terminate - as of the date such litigation is filed. - - 4. Redistribution. You may reproduce and distribute copies of the - Work or Derivative Works thereof in any medium, with or without - modifications, and in Source or Object form, provided that You - meet the following conditions: - - (a) You must give any other recipients of the Work or - Derivative Works a copy of this License; and - - (b) You must cause any modified files to carry prominent notices - stating that You changed the files; and - - (c) You must retain, in the Source form of any Derivative Works - that You distribute, all copyright, patent, trademark, and - attribution notices from the Source form of the Work, - excluding those notices that do not pertain to any part of - the Derivative Works; and - - (d) If the Work includes a "NOTICE" text file as part of its - distribution, then any Derivative Works that You distribute must - include a readable copy of the attribution notices contained - within such NOTICE file, excluding those notices that do not - pertain to any part of the Derivative Works, in at least one - of the following places: within a NOTICE text file distributed - as part of the Derivative Works; within the Source form or - documentation, if provided along with the Derivative Works; or, - within a display generated by the Derivative Works, if and - wherever such third-party notices normally appear. The contents - of the NOTICE file are for informational purposes only and - do not modify the License. You may add Your own attribution - notices within Derivative Works that You distribute, alongside - or as an addendum to the NOTICE text from the Work, provided - that such additional attribution notices cannot be construed - as modifying the License. - - You may add Your own copyright statement to Your modifications and - may provide additional or different license terms and conditions - for use, reproduction, or distribution of Your modifications, or - for any such Derivative Works as a whole, provided Your use, - reproduction, and distribution of the Work otherwise complies with - the conditions stated in this License. - - 5. Submission of Contributions. Unless You explicitly state otherwise, - any Contribution intentionally submitted for inclusion in the Work - by You to the Licensor shall be under the terms and conditions of - this License, without any additional terms or conditions. - Notwithstanding the above, nothing herein shall supersede or modify - the terms of any separate license agreement you may have executed - with Licensor regarding such Contributions. - - 6. Trademarks. This License does not grant permission to use the trade - names, trademarks, service marks, or product names of the Licensor, - except as required for reasonable and customary use in describing the - origin of the Work and reproducing the content of the NOTICE file. - - 7. Disclaimer of Warranty. Unless required by applicable law or - agreed to in writing, Licensor provides the Work (and each - Contributor provides its Contributions) on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or - implied, including, without limitation, any warranties or conditions - of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A - PARTICULAR PURPOSE. You are solely responsible for determining the - appropriateness of using or redistributing the Work and assume any - risks associated with Your exercise of permissions under this License. - - 8. Limitation of Liability. In no event and under no legal theory, - whether in tort (including negligence), contract, or otherwise, - unless required by applicable law (such as deliberate and grossly - negligent acts) or agreed to in writing, shall any Contributor be - liable to You for damages, including any direct, indirect, special, - incidental, or consequential damages of any character arising as a - result of this License or out of the use or inability to use the - Work (including but not limited to damages for loss of goodwill, - work stoppage, computer failure or malfunction, or any and all - other commercial damages or losses), even if such Contributor - has been advised of the possibility of such damages. - - 9. Accepting Warranty or Additional Liability. While redistributing - the Work or Derivative Works thereof, You may choose to offer, - and charge a fee for, acceptance of support, warranty, indemnity, - or other liability obligations and/or rights consistent with this - License. However, in accepting such obligations, You may act only - on Your own behalf and on Your sole responsibility, not on behalf - of any other Contributor, and only if You agree to indemnify, - defend, and hold each Contributor harmless for any liability - incurred by, or claims asserted against, such Contributor by reason - of your accepting any such warranty or additional liability. - - END OF TERMS AND CONDITIONS - - APPENDIX: How to apply the Apache License to your work. - - To apply the Apache License to your work, attach the following - boilerplate notice, with the fields enclosed by brackets "[]" - replaced with your own identifying information. (Don't include - the brackets!) The text should be enclosed in the appropriate - comment syntax for the file format. We also recommend that a - file or class name and description of purpose be included on the - same "printed page" as the copyright notice for easier - identification within third-party archives. - - Copyright [yyyy] [name of copyright owner] - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. diff --git a/README.md b/README.md index b8d169b..30392c8 100644 --- a/README.md +++ b/README.md @@ -1,38 +1,10 @@ -# OpenStack OpenStackId +This project is no longer maintained. -OpenStackId is a single-sign-on service integrated with -openstack.org profile database. Provides openid and oauth2 -authentication for third party applications. +The contents of this repository are still available in the Git +source code management system. To see the contents of this +repository before it reached its end of life, please check out the +previous commit with "git checkout HEAD^1". -# Quick Start - - class { 'openstackid': - site_admin_password => 'adminpass', - # openstackid application database - id_mysql_host => 'localhost', - id_mysql_user => 'openstackid', - id_mysql_password => 'password', - id_db_name => 'openstackid', - # redis settings - redis_port => '6378', - redis_host => '127.0.0.1', - redis_password => 'password', - # recaptcha service keys - id_recaptcha_public_key => $id_recaptcha_public_key, - id_recaptcha_private_key => $id_recaptcha_private_key, - id_recaptcha_template => $id_recaptcha_template, - # logging - id_log_error_to_email => $id_log_error_to_email, - id_log_error_from_email => $id_log_error_from_email, - # laravel environment settings - id_environment => 'dev', - # ssl configuration - ssl_cert_file => "/etc/ssl/certs/${::fqdn}.pem", - ssl_key_file => "/etc/ssl/private/${::fqdn}.key", - ssl_chain_file => '/etc/ssl/certs/intermediate.pem', - ssl_cert_file_contents => $ssl_cert_file_contents, - ssl_key_file_contents => $ssl_key_file_contents, - ssl_chain_file_contents => $ssl_chain_file_contents, - # release to deploy - openstackid_release => '1.0.2', - } \ No newline at end of file +For any further questions, please email +service-discuss@lists.opendev.org or join #opendev on +OFTC. diff --git a/Rakefile b/Rakefile deleted file mode 100644 index 7f22329..0000000 --- a/Rakefile +++ /dev/null @@ -1,8 +0,0 @@ -require 'rubygems' -require 'puppetlabs_spec_helper/rake_tasks' -require 'puppet-lint/tasks/puppet-lint' -PuppetLint.configuration.fail_on_warnings = true -PuppetLint.configuration.send('disable_80chars') -PuppetLint.configuration.send('disable_autoloader_layout') -PuppetLint.configuration.send('disable_class_inherits_from_params_class') -PuppetLint.configuration.send('disable_class_parameter_defaults') \ No newline at end of file diff --git a/bindep.txt b/bindep.txt deleted file mode 100644 index 7cdd58e..0000000 --- a/bindep.txt +++ /dev/null @@ -1,11 +0,0 @@ -# This is a cross-platform list tracking distribution packages needed by tests; -# see http://docs.openstack.org/infra/bindep/ for additional information. - -libxml2-devel [test platform:rpm] -libxml2-dev [test platform:dpkg] -libxslt-devel [test platform:rpm] -libxslt1-dev [test platform:dpkg] -ruby-devel [test platform:rpm] -ruby-dev [test platform:dpkg] -zlib1g-dev [test platform:dpkg] -zlib-devel [test platform:rpm] diff --git a/files/deploy.sh b/files/deploy.sh deleted file mode 100644 index 3b73d02..0000000 --- a/files/deploy.sh +++ /dev/null @@ -1,39 +0,0 @@ -#!/bin/bash -e -# -# Site deployment tool -# -# Commands: -# init @sitealias http://example.com/source.tar.gz -# status @sitealias -# update @sitelias http://example.com/source.tar.gz -# rollback @sitealias -# -# - - - -TOP_DIR=$(cd $(dirname "$0") && pwd) -source $TOP_DIR/functions - -if [ ! -r $TOP_DIR/deployrc ]; then - echo "ERROR: missing deployrc - did you grab more than just deploy.sh?" - exit 1 -fi -source $TOP_DIR/deployrc - -command="${1}" -case $command in - init) - site_init ${2} - ;; - status) - site_status ${2} - ;; - update) - site_update ${2} - ;; - *) - print_help - exit 1 - ;; -esac diff --git a/files/deployrc b/files/deployrc deleted file mode 100644 index 1d20fc7..0000000 --- a/files/deployrc +++ /dev/null @@ -1,8 +0,0 @@ -CONF_DIR=$TOP_DIR -FILE_OWNER=root -FILE_GROUP=www-data - -# allow local overrides of env variables -if [ -f $TOP_DIR/localrc ]; then - . $TOP_DIR/localrc -fi diff --git a/files/functions b/files/functions deleted file mode 100644 index 8fe778f..0000000 --- a/files/functions +++ /dev/null @@ -1,293 +0,0 @@ -function print_help { - echo "Usage: `basename $0` command [options]" - echo "" - echo "Commands:" - echo " status [site] return status information about site configurations" - echo " init initialize site structure" - echo " update update to new version" - echo "" -} - -function clear_redis_cache { - echo "running redis FLUSHDB ..." - echo "FLUSHDB" | redis-cli -h 127.0.0.1 -p $REDIS_PORT -a "$REDIS_PASSWORD" - echo "running redis FLUSHALL ..." - echo "FLUSHALL" | redis-cli -h 127.0.0.1 -p $REDIS_PORT -a "$REDIS_PASSWORD" -} - -function clear_orm_cache { - echo "clearing doctrine metadata" - php artisan doctrine:clear:metadata:cache - echo "clearing doctrine query cache" - php artisan doctrine:clear:query:cache - echo "clearing doctrine result cache" - php artisan doctrine:clear:result:cache - echo "generating doctrine proxies" - php artisan doctrine:generate:proxies -} - -function clear_laravel_cache { - php artisan route:clear - php artisan route:cache - php artisan config:cache - php artisan view:clear - php artisan view:cache -} - -function check_laravel_storage_structure { - # check for new storage structure ( LV 5.x) - if [[ ! -d $SITE_ROOT/storage/framework ]]; then - mkdir -p $SITE_ROOT/storage/framework - mkdir -p $SITE_ROOT/storage/framework/cache - mkdir -p $SITE_ROOT/storage/framework/views - mkdir -p $SITE_ROOT/storage/framework/sessions - fi - if [[ ! -d $SITE_ROOT/storage/app ]]; then - mkdir -p $SITE_ROOT/storage/app - mkdir -p $SITE_ROOT/storage/app/public - fi - if [[ ! -d $SITE_ROOT/storage/logs ]]; then - mkdir -p $SITE_ROOT/storage/logs - fi -} - -function set_laravel_storage_permissions { - chown -R $FILE_OWNER:$FILE_GROUP $SITE_ROOT/storage - chmod 02770 $SITE_ROOT/storage; - find $SITE_ROOT/storage/ -type d -exec chmod 0775 {} \; - find $SITE_ROOT/storage/ -type f -exec chmod 0664 {} \; - # set html purifier cache permission - chmod 0770 vendor/ezyang/htmlpurifier/library/HTMLPurifier/DefinitionCache/Serializer -} - -function set_python_venv { - chmod 0775 $target_dir/app/Console/Commands/SpammerProcess - chown :www-data $target_dir/app/Console/Commands/SpammerProcess - cd $target_dir/app/Console/Commands/SpammerProcess - python3 -m venv env - source env/bin/activate - pip install "pip==20.3.4" - pip install --upgrade setuptools - pip install wheel - pip install -r requirements.txt - deactivate - cd $target_dir -} - -function site_init { - if [ ! $1 ]; then - echo "ERROR: site parameter mandatory" - exit 1 - fi - CONF_PATH="$CONF_DIR/conf.d/$1.conf" - if [ ! -f $CONF_PATH ]; then - echo "Site configuration not found: " $1 - exit 1 - fi - source $CONF_PATH - if [ -f "$SITE_ROOT/w/public/index.php" ]; then - echo "Cannot override an existing deployment: $SITE_ROOT/w" - exit 1 - fi - # cleanup previous broken deployment - rm -rf $SITE_ROOT/slot0 - # create directory structure - for dir in slot0 slot1; do - mkdir -p $SITE_ROOT/$dir - chown $FILE_OWNER:$FILE_GROUP $SITE_ROOT/$dir - done - target_dir="$SITE_ROOT/slot0" - # fetch catalog and write actual version - fetch_catalog - RELEASE_VERSION=`catalog_get_version` - echo $RELEASE_VERSION > $SITE_ROOT/slot0/release - # fetch and extract release tarball - umask 0027 - if [[ $SOURCE_TARBALL == http* ]]; then - echo "Download from http!" - curl $SOURCE_TARBALL | tar -xzv -C $target_dir --strip-components 1 --no-same-permissions - else - echo "extract from local file system" - if [ ! -f $SOURCE_TARBALL ]; then - echo "Source tarball not found: $SOURCE_TARBALL" - exit 1 - fi - tar -xzvf $SOURCE_TARBALL -C $target_dir --strip-components 1 --no-same-permissions - fi - chown -R $FILE_OWNER:$FILE_GROUP $target_dir - umask 0022 - # link configuration files managed by puppet - - ln -sf /etc/openstackid/.env $target_dir/.env - - # convert app/storage into symlink and set permissions - mv $target_dir/storage $SITE_ROOT/ - - # link shared app/storage directory - rm -rf $target_dir/storage - ln -s $SITE_ROOT/storage $target_dir - check_laravel_storage_structure - - # set artisan execution permissions - cd $target_dir && chmod 0770 artisan - - clear_redis_cache - - clear_orm_cache - - clear_laravel_cache - - echo "running db migrations"; - php artisan doctrine:migrations:migrate --connection=model --force --env=$LARAVEL_ENV - - if [[ $USE_DB_SEEDING -eq 1 ]]; then - php artisan db:seed --env=$LARAVEL_ENV --force - fi - - sudo npm install - sudo npm run build - - set_laravel_storage_permissions - - set_python_venv - - # activate site - rm -rf $SITE_ROOT/w - ln -s $SITE_ROOT/slot0 $SITE_ROOT/w - - echo "Restarting laravel queue worker ..." - php artisan queue:restart - - echo "supervisorctl reload" - supervisorctl reload - -} - -function site_status { - if [ ! $1 ]; then - echo "ERROR: site parameter mandatory" - exit 1 - fi - CONF_PATH="$CONF_DIR/conf.d/$1.conf" - if [ ! -f $CONF_PATH ]; then - echo "Site configuration not found: $1" - exit 0 - fi - source $CONF_PATH - if [ ! -f "$SITE_ROOT/w/public/index.php" ]; then - if [ -d "$SITE_ROOT/slot0" ]; then - echo "PENDING" - else - echo "N/A" - exit 1 - fi - else - fetch_catalog - REMOTE_VERSION=`catalog_get_version` - RELEASE_VERSION=$(head -n 1 $SITE_ROOT/w/release) - if [ "$REMOTE_VERSION" == "$RELEASE_VERSION" ]; then - echo "INSTALLED [$RELEASE_VERSION]" - else - echo "UPDATE AVAILABLE [$RELEASE_VERSION-$REMOTE_VERSION]" - fi - fi -} - -function fetch_catalog { - curl --silent $SOURCE_ROOT > $SITE_ROOT/releases.lst - grep -q "^]\+>//g" | sed -r "s/^$RELEASE_NAME//"` - RELEASE_DATE=`echo $RAW_LINE | awk '{ print $1 " " $2}'` - echo $RELEASE_DATE -} - -function site_update { - if [ ! $1 ]; then - echo "ERROR: missing site parameter" - exit 1 - fi - CONF_PATH="$CONF_DIR/conf.d/$1.conf" - if [ ! -f $CONF_PATH ]; then - echo "Site configuration not found: $1" - exit 0 - fi - source $CONF_PATH - SITE_LINK=`readlink -f $SITE_ROOT/w` - ACTIVE_SLOT=`basename $SITE_LINK` - case $ACTIVE_SLOT in - slot0) - TARGET_SLOT='slot1' - ;; - slot1) - TARGET_SLOT='slot0' - ;; - *) - echo "Invalid active slot" - exit 1 - esac - echo "Target slot: $TARGET_SLOT" - target_dir="$SITE_ROOT/$TARGET_SLOT" - rm -rf $target_dir - mkdir $target_dir - # fetch catalog and write actual version - fetch_catalog - RELEASE_VERSION=`catalog_get_version` - echo $RELEASE_VERSION > $target_dir/release - # fetch and extract release tarball - umask 0027 - if [[ $SOURCE_TARBALL == http* ]]; then - echo "Download from http!" - curl $SOURCE_TARBALL | tar -xzv -C $target_dir --strip-components 1 --no-same-permissions - else - echo "extract from local file system" - if [ ! -f $SOURCE_TARBALL ]; then - echo "Source tarball not found: $SOURCE_TARBALL" - exit 1 - fi - tar -xzvf $SOURCE_TARBALL -C $target_dir --strip-components 1 --no-same-permissions - fi - - chown -R $FILE_OWNER:$FILE_GROUP $target_dir - umask 0022 - - # link configuration files managed by puppet - ln -sf /etc/openstackid/.env $target_dir/.env - # link shared app/storage directory - rm -rf $target_dir/storage - ln -s $SITE_ROOT/storage $target_dir - check_laravel_storage_structure - # set artisan exec permissions - cd $target_dir - chmod 0770 artisan - - clear_redis_cache - - clear_orm_cache - - clear_laravel_cache - - echo "running db migrations" - php artisan doctrine:migrations:migrate --connection=model --force --env=$LARAVEL_ENV - - sudo npm install - sudo npm run build - - set_laravel_storage_permissions - - set_python_venv - - # activate site - rm -rf $SITE_ROOT/w - ln -s $target_dir $SITE_ROOT/w - # to reset op cache - /usr/sbin/service $PHP_SERVICE_NAME restart - - echo "Restarting laravel queue worker ..." - php artisan queue:restart - - echo "supervisorctl reload" - supervisorctl reload -} diff --git a/files/php5/php-fpm.conf b/files/php5/php-fpm.conf deleted file mode 100644 index acc2be0..0000000 --- a/files/php5/php-fpm.conf +++ /dev/null @@ -1,129 +0,0 @@ -;;;;;;;;;;;;;;;;;;;;; -; FPM Configuration ; -;;;;;;;;;;;;;;;;;;;;; - -; All relative paths in this configuration file are relative to PHP's install -; prefix (/usr). This prefix can be dynamically changed by using the -; '-p' argument from the command line. - -; Include one or more files. If glob(3) exists, it is used to include a bunch of -; files from a glob(3) pattern. This directive can be used everywhere in the -; file. -; Relative path can also be used. They will be prefixed by: -; - the global prefix if it's been set (-p argument) -; - /usr otherwise -;include=/etc/php5/fpm/*.conf - -;;;;;;;;;;;;;;;;;; -; Global Options ; -;;;;;;;;;;;;;;;;;; - -[global] -; Pid file -; Note: the default prefix is /var -; Default Value: none -pid = /var/run/php5-fpm.pid - -; Error log file -; If it's set to "syslog", log is sent to syslogd instead of being written -; in a local file. -; Note: the default prefix is /var -; Default Value: log/php-fpm.log -error_log = /var/log/php5-fpm.log - -; syslog_facility is used to specify what type of program is logging the -; message. This lets syslogd specify that messages from different facilities -; will be handled differently. -; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON) -; Default Value: daemon -;syslog.facility = daemon - -; syslog_ident is prepended to every message. If you have multiple FPM -; instances running on the same server, you can change the default value -; which must suit common needs. -; Default Value: php-fpm -;syslog.ident = php-fpm - -; Log level -; Possible Values: alert, error, warning, notice, debug -; Default Value: notice -;log_level = notice - -; If this number of child processes exit with SIGSEGV or SIGBUS within the time -; interval set by emergency_restart_interval then FPM will restart. A value -; of '0' means 'Off'. -; Default Value: 0 -emergency_restart_threshold = 10 - -; Interval of time used by emergency_restart_interval to determine when -; a graceful restart will be initiated. This can be useful to work around -; accidental corruptions in an accelerator's shared memory. -; Available Units: s(econds), m(inutes), h(ours), or d(ays) -; Default Unit: seconds -; Default Value: 0 -emergency_restart_interval = 1m - -; Time limit for child processes to wait for a reaction on signals from master. -; Available units: s(econds), m(inutes), h(ours), or d(ays) -; Default Unit: seconds -; Default Value: 0 -process_control_timeout = 10s - -; The maximum number of processes FPM will fork. This has been design to control -; the global number of processes when using dynamic PM within a lot of pools. -; Use it with caution. -; Note: A value of 0 indicates no limit -; Default Value: 0 -; process.max = 128 - -; Specify the nice(2) priority to apply to the master process (only if set) -; The value can vary from -19 (highest priority) to 20 (lower priority) -; Note: - It will only work if the FPM master process is launched as root -; - The pool process will inherit the master process priority -; unless it specified otherwise -; Default Value: no set -; process.priority = -19 - -; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. -; Default Value: yes -;daemonize = yes - -; Set open file descriptor rlimit for the master process. -; Default Value: system defined value -;rlimit_files = 1024 - -; Set max core size rlimit for the master process. -; Possible Values: 'unlimited' or an integer greater or equal to 0 -; Default Value: system defined value -;rlimit_core = 0 - -; Specify the event mechanism FPM will use. The following is available: -; - select (any POSIX os) -; - poll (any POSIX os) -; - epoll (linux >= 2.5.44) -; - kqueue (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0) -; - /dev/poll (Solaris >= 7) -; - port (Solaris >= 10) -; Default Value: not set (auto detection) -;events.mechanism = epoll - -; When FPM is build with systemd integration, specify the interval, -; in second, between health report notification to systemd. -; Set to 0 to disable. -; Available Units: s(econds), m(inutes), h(ours) -; Default Unit: seconds -; Default value: 10 -;systemd_interval = 10 - -;;;;;;;;;;;;;;;;;;;; -; Pool Definitions ; -;;;;;;;;;;;;;;;;;;;; - -; Multiple pools of child processes may be started with different listening -; ports and different management options. The name of the pool will be -; used in logs and stats. There is no limitation on the number of pools which -; FPM can handle. Your system will tell you anyway :) - -; To configure the pools it is recommended to have one .conf file per -; pool in the following directory: -include=/etc/php5/fpm/pool.d/*.conf diff --git a/files/php5/php.ini b/files/php5/php.ini deleted file mode 100644 index af26613..0000000 --- a/files/php5/php.ini +++ /dev/null @@ -1,1930 +0,0 @@ -[PHP] - -;;;;;;;;;;;;;;;;;;; -; About php.ini ; -;;;;;;;;;;;;;;;;;;; -; PHP's initialization file, generally called php.ini, is responsible for -; configuring many of the aspects of PHP's behavior. - -; PHP attempts to find and load this configuration from a number of locations. -; The following is a summary of its search order: -; 1. SAPI module specific location. -; 2. The PHPRC environment variable. (As of PHP 5.2.0) -; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0) -; 4. Current working directory (except CLI) -; 5. The web server's directory (for SAPI modules), or directory of PHP -; (otherwise in Windows) -; 6. The directory from the --with-config-file-path compile time option, or the -; Windows directory (C:\windows or C:\winnt) -; See the PHP docs for more specific information. -; http://php.net/configuration.file - -; The syntax of the file is extremely simple. Whitespace and lines -; beginning with a semicolon are silently ignored (as you probably guessed). -; Section headers (e.g. [Foo]) are also silently ignored, even though -; they might mean something in the future. - -; Directives following the section heading [PATH=/www/mysite] only -; apply to PHP files in the /www/mysite directory. Directives -; following the section heading [HOST=www.example.com] only apply to -; PHP files served from www.example.com. Directives set in these -; special sections cannot be overridden by user-defined INI files or -; at runtime. Currently, [PATH=] and [HOST=] sections only work under -; CGI/FastCGI. -; http://php.net/ini.sections - -; Directives are specified using the following syntax: -; directive = value -; Directive names are *case sensitive* - foo=bar is different from FOO=bar. -; Directives are variables used to configure PHP or PHP extensions. -; There is no name validation. If PHP can't find an expected -; directive because it is not set or is mistyped, a default value will be used. - -; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one -; of the INI constants (On, Off, True, False, Yes, No and None) or an expression -; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a -; previously set variable or directive (e.g. ${foo}) - -; Expressions in the INI file are limited to bitwise operators and parentheses: -; | bitwise OR -; ^ bitwise XOR -; & bitwise AND -; ~ bitwise NOT -; ! boolean NOT - -; Boolean flags can be turned on using the values 1, On, True or Yes. -; They can be turned off using the values 0, Off, False or No. - -; An empty string can be denoted by simply not writing anything after the equal -; sign, or by using the None keyword: - -; foo = ; sets foo to an empty string -; foo = None ; sets foo to an empty string -; foo = "None" ; sets foo to the string 'None' - -; If you use constants in your value, and these constants belong to a -; dynamically loaded extension (either a PHP extension or a Zend extension), -; you may only use these constants *after* the line that loads the extension. - -;;;;;;;;;;;;;;;;;;; -; About this file ; -;;;;;;;;;;;;;;;;;;; -; PHP comes packaged with two INI files. One that is recommended to be used -; in production environments and one that is recommended to be used in -; development environments. - -; php.ini-production contains settings which hold security, performance and -; best practices at its core. But please be aware, these settings may break -; compatibility with older or less security conscience applications. We -; recommending using the production ini in production and testing environments. - -; php.ini-development is very similar to its production variant, except it's -; much more verbose when it comes to errors. We recommending using the -; development version only in development environments as errors shown to -; application users can inadvertently leak otherwise secure information. - -; This is php.ini-production INI file. - -;;;;;;;;;;;;;;;;;;; -; Quick Reference ; -;;;;;;;;;;;;;;;;;;; -; The following are all the settings which are different in either the production -; or development versions of the INIs with respect to PHP's default behavior. -; Please see the actual settings later in the document for more details as to why -; we recommend these changes in PHP's behavior. - -; display_errors -; Default Value: On -; Development Value: On -; Production Value: Off - -; display_startup_errors -; Default Value: Off -; Development Value: On -; Production Value: Off - -; error_reporting -; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED -; Development Value: E_ALL -; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT - -; html_errors -; Default Value: On -; Development Value: On -; Production value: On - -; log_errors -; Default Value: Off -; Development Value: On -; Production Value: On - -; max_input_time -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) - -; output_buffering -; Default Value: Off -; Development Value: 4096 -; Production Value: 4096 - -; register_argc_argv -; Default Value: On -; Development Value: Off -; Production Value: Off - -; request_order -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" - -; session.bug_compat_42 -; Default Value: On -; Development Value: On -; Production Value: Off - -; session.bug_compat_warn -; Default Value: On -; Development Value: On -; Production Value: Off - -; session.gc_divisor -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 - -; session.hash_bits_per_character -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 - -; short_open_tag -; Default Value: On -; Development Value: Off -; Production Value: Off - -; track_errors -; Default Value: Off -; Development Value: On -; Production Value: Off - -; url_rewriter.tags -; Default Value: "a=href,area=href,frame=src,form=,fieldset=" -; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" -; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" - -; variables_order -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS" - -;;;;;;;;;;;;;;;;;;;; -; php.ini Options ; -;;;;;;;;;;;;;;;;;;;; -; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini" -;user_ini.filename = ".user.ini" - -; To disable this feature set this option to empty value -;user_ini.filename = - -; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes) -;user_ini.cache_ttl = 300 - -;;;;;;;;;;;;;;;;;;;; -; Language Options ; -;;;;;;;;;;;;;;;;;;;; - -; Enable the PHP scripting language engine under Apache. -; http://php.net/engine -engine = On - -; This directive determines whether or not PHP will recognize code between -; tags as PHP source which should be processed as such. It is -; generally recommended that should be used and that this feature -; should be disabled, as enabling it may result in issues when generating XML -; documents, however this remains supported for backward compatibility reasons. -; Note that this directive does not control the tags. -; http://php.net/asp-tags -asp_tags = Off - -; The number of significant digits displayed in floating point numbers. -; http://php.net/precision -precision = 14 - -; Output buffering is a mechanism for controlling how much output data -; (excluding headers and cookies) PHP should keep internally before pushing that -; data to the client. If your application's output exceeds this setting, PHP -; will send that data in chunks of roughly the size you specify. -; Turning on this setting and managing its maximum buffer size can yield some -; interesting side-effects depending on your application and web server. -; You may be able to send headers and cookies after you've already sent output -; through print or echo. You also may see performance benefits if your server is -; emitting less packets due to buffered output versus PHP streaming the output -; as it gets it. On production servers, 4096 bytes is a good setting for performance -; reasons. -; Note: Output buffering can also be controlled via Output Buffering Control -; functions. -; Possible Values: -; On = Enabled and buffer is unlimited. (Use with caution) -; Off = Disabled -; Integer = Enables the buffer and sets its maximum size in bytes. -; Note: This directive is hardcoded to Off for the CLI SAPI -; Default Value: Off -; Development Value: 4096 -; Production Value: 4096 -; http://php.net/output-buffering -output_buffering = 4096 - -; You can redirect all of the output of your scripts to a function. For -; example, if you set output_handler to "mb_output_handler", character -; encoding will be transparently converted to the specified encoding. -; Setting any output handler automatically turns on output buffering. -; Note: People who wrote portable scripts should not depend on this ini -; directive. Instead, explicitly set the output handler using ob_start(). -; Using this ini directive may cause problems unless you know what script -; is doing. -; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" -; and you cannot use both "ob_gzhandler" and "zlib.output_compression". -; Note: output_handler must be empty if this is set 'On' !!!! -; Instead you must use zlib.output_handler. -; http://php.net/output-handler -;output_handler = - -; Transparent output compression using the zlib library -; Valid values for this option are 'off', 'on', or a specific buffer size -; to be used for compression (default is 4KB) -; Note: Resulting chunk size may vary due to nature of compression. PHP -; outputs chunks that are few hundreds bytes each as a result of -; compression. If you prefer a larger chunk size for better -; performance, enable output_buffering in addition. -; Note: You need to use zlib.output_handler instead of the standard -; output_handler, or otherwise the output will be corrupted. -; http://php.net/zlib.output-compression -zlib.output_compression = Off - -; http://php.net/zlib.output-compression-level -;zlib.output_compression_level = -1 - -; You cannot specify additional output handlers if zlib.output_compression -; is activated here. This setting does the same as output_handler but in -; a different order. -; http://php.net/zlib.output-handler -;zlib.output_handler = - -; Implicit flush tells PHP to tell the output layer to flush itself -; automatically after every output block. This is equivalent to calling the -; PHP function flush() after each and every call to print() or echo() and each -; and every HTML block. Turning this option on has serious performance -; implications and is generally recommended for debugging purposes only. -; http://php.net/implicit-flush -; Note: This directive is hardcoded to On for the CLI SAPI -implicit_flush = Off - -; The unserialize callback function will be called (with the undefined class' -; name as parameter), if the unserializer finds an undefined class -; which should be instantiated. A warning appears if the specified function is -; not defined, or if the function doesn't include/implement the missing class. -; So only set this entry, if you really want to implement such a -; callback-function. -unserialize_callback_func = - -; When floats & doubles are serialized store serialize_precision significant -; digits after the floating point. The default value ensures that when floats -; are decoded with unserialize, the data will remain the same. -serialize_precision = 17 - -; open_basedir, if set, limits all file operations to the defined directory -; and below. This directive makes most sense if used in a per-directory -; or per-virtualhost web server configuration file. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -; http://php.net/open-basedir -;open_basedir = - -; This directive allows you to disable certain functions for security reasons. -; It receives a comma-delimited list of function names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -; http://php.net/disable-functions -disable_functions = pcntl_alarm,pcntl_fork,pcntl_waitpid,pcntl_wait,pcntl_wifexited,pcntl_wifstopped,pcntl_wifsignaled,pcntl_wexitstatus,pcntl_wtermsig,pcntl_wstopsig,pcntl_signal,pcntl_signal_dispatch,pcntl_get_last_error,pcntl_strerror,pcntl_sigprocmask,pcntl_sigwaitinfo,pcntl_sigtimedwait,pcntl_exec,pcntl_getpriority,pcntl_setpriority, - -; This directive allows you to disable certain classes for security reasons. -; It receives a comma-delimited list of class names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -; http://php.net/disable-classes -disable_classes = - -; Colors for Syntax Highlighting mode. Anything that's acceptable in -; would work. -; http://php.net/syntax-highlighting -;highlight.string = #DD0000 -;highlight.comment = #FF9900 -;highlight.keyword = #007700 -;highlight.default = #0000BB -;highlight.html = #000000 - -; If enabled, the request will be allowed to complete even if the user aborts -; the request. Consider enabling it if executing long requests, which may end up -; being interrupted by the user or a browser timing out. PHP's default behavior -; is to disable this feature. -; http://php.net/ignore-user-abort -;ignore_user_abort = On - -; Determines the size of the realpath cache to be used by PHP. This value should -; be increased on systems where PHP opens many files to reflect the quantity of -; the file operations performed. -; http://php.net/realpath-cache-size -;realpath_cache_size = 16k - -; Duration of time, in seconds for which to cache realpath information for a given -; file or directory. For systems with rarely changing files, consider increasing this -; value. -; http://php.net/realpath-cache-ttl -;realpath_cache_ttl = 120 - -; Enables or disables the circular reference collector. -; http://php.net/zend.enable-gc -zend.enable_gc = On - -; If enabled, scripts may be written in encodings that are incompatible with -; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such -; encodings. To use this feature, mbstring extension must be enabled. -; Default: Off -;zend.multibyte = Off - -; Allows to set the default encoding for the scripts. This value will be used -; unless "declare(encoding=...)" directive appears at the top of the script. -; Only affects if zend.multibyte is set. -; Default: "" -;zend.script_encoding = - -;;;;;;;;;;;;;;;;; -; Miscellaneous ; -;;;;;;;;;;;;;;;;; - -; Decides whether PHP may expose the fact that it is installed on the server -; (e.g. by adding its signature to the Web server header). It is no security -; threat in any way, but it makes it possible to determine whether you use PHP -; on your server or not. -; http://php.net/expose-php -expose_php = Off - -;;;;;;;;;;;;;;;;;;; -; Resource Limits ; -;;;;;;;;;;;;;;;;;;; - -; Maximum execution time of each script, in seconds -; http://php.net/max-execution-time -; Note: This directive is hardcoded to 0 for the CLI SAPI -max_execution_time = 5 - -; Maximum amount of time each script may spend parsing request data. It's a good -; idea to limit this time on productions servers in order to eliminate unexpectedly -; long running scripts. -; Note: This directive is hardcoded to -1 for the CLI SAPI -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) -; http://php.net/max-input-time -max_input_time = 60 - -; Maximum input variable nesting level -; http://php.net/max-input-nesting-level -;max_input_nesting_level = 64 - -; How many GET/POST/COOKIE input variables may be accepted -; max_input_vars = 1000 - -; Maximum amount of memory a script may consume (128MB) -; http://php.net/memory-limit -memory_limit = 32M - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Error handling and logging ; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -; This directive informs PHP of which errors, warnings and notices you would like -; it to take action for. The recommended way of setting values for this -; directive is through the use of the error level constants and bitwise -; operators. The error level constants are below here for convenience as well as -; some common settings and their meanings. -; By default, PHP is set to take action on all errors, notices and warnings EXCEPT -; those related to E_NOTICE and E_STRICT, which together cover best practices and -; recommended coding standards in PHP. For performance reasons, this is the -; recommend error reporting setting. Your production server shouldn't be wasting -; resources complaining about best practices and coding standards. That's what -; development servers and development settings are for. -; Note: The php.ini-development file has this setting as E_ALL. This -; means it pretty much reports everything which is exactly what you want during -; development and early testing. -; -; Error Level Constants: -; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0) -; E_ERROR - fatal run-time errors -; E_RECOVERABLE_ERROR - almost fatal run-time errors -; E_WARNING - run-time warnings (non-fatal errors) -; E_PARSE - compile-time parse errors -; E_NOTICE - run-time notices (these are warnings which often result -; from a bug in your code, but it's possible that it was -; intentional (e.g., using an uninitialized variable and -; relying on the fact it's automatically initialized to an -; empty string) -; E_STRICT - run-time notices, enable to have PHP suggest changes -; to your code which will ensure the best interoperability -; and forward compatibility of your code -; E_CORE_ERROR - fatal errors that occur during PHP's initial startup -; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's -; initial startup -; E_COMPILE_ERROR - fatal compile-time errors -; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) -; E_USER_ERROR - user-generated error message -; E_USER_WARNING - user-generated warning message -; E_USER_NOTICE - user-generated notice message -; E_DEPRECATED - warn about code that will not work in future versions -; of PHP -; E_USER_DEPRECATED - user-generated deprecation warnings -; -; Common Values: -; E_ALL (Show all errors, warnings and notices including coding standards.) -; E_ALL & ~E_NOTICE (Show all errors, except for notices) -; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.) -; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) -; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED -; Development Value: E_ALL -; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT -; http://php.net/error-reporting -error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT - -; This directive controls whether or not and where PHP will output errors, -; notices and warnings too. Error output is very useful during development, but -; it could be very dangerous in production environments. Depending on the code -; which is triggering the error, sensitive information could potentially leak -; out of your application such as database usernames and passwords or worse. -; It's recommended that errors be logged on production servers rather than -; having the errors sent to STDOUT. -; Possible Values: -; Off = Do not display any errors -; stderr = Display errors to STDERR (affects only CGI/CLI binaries!) -; On or stdout = Display errors to STDOUT -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/display-errors -display_errors = Off - -; The display of errors which occur during PHP's startup sequence are handled -; separately from display_errors. PHP's default behavior is to suppress those -; errors from clients. Turning the display of startup errors on can be useful in -; debugging configuration problems. But, it's strongly recommended that you -; leave this setting off on production servers. -; Default Value: Off -; Development Value: On -; Production Value: Off -; http://php.net/display-startup-errors -display_startup_errors = Off - -; Besides displaying errors, PHP can also log errors to locations such as a -; server-specific log, STDERR, or a location specified by the error_log -; directive found below. While errors should not be displayed on productions -; servers they should still be monitored and logging is a great way to do that. -; Default Value: Off -; Development Value: On -; Production Value: On -; http://php.net/log-errors -log_errors = On - -; Set maximum length of log_errors. In error_log information about the source is -; added. The default is 1024 and 0 allows to not apply any maximum length at all. -; http://php.net/log-errors-max-len -log_errors_max_len = 1024 - -; Do not log repeated messages. Repeated errors must occur in same file on same -; line unless ignore_repeated_source is set true. -; http://php.net/ignore-repeated-errors -ignore_repeated_errors = Off - -; Ignore source of message when ignoring repeated messages. When this setting -; is On you will not log errors with repeated messages from different files or -; source lines. -; http://php.net/ignore-repeated-source -ignore_repeated_source = Off - -; If this parameter is set to Off, then memory leaks will not be shown (on -; stdout or in the log). This has only effect in a debug compile, and if -; error reporting includes E_WARNING in the allowed list -; http://php.net/report-memleaks -report_memleaks = On - -; This setting is on by default. -;report_zend_debug = 0 - -; Store the last error/warning message in $php_errormsg (boolean). Setting this value -; to On can assist in debugging and is appropriate for development servers. It should -; however be disabled on production servers. -; Default Value: Off -; Development Value: On -; Production Value: Off -; http://php.net/track-errors -track_errors = Off - -; Turn off normal error reporting and emit XML-RPC error XML -; http://php.net/xmlrpc-errors -;xmlrpc_errors = 0 - -; An XML-RPC faultCode -;xmlrpc_error_number = 0 - -; When PHP displays or logs an error, it has the capability of formatting the -; error message as HTML for easier reading. This directive controls whether -; the error message is formatted as HTML or not. -; Note: This directive is hardcoded to Off for the CLI SAPI -; Default Value: On -; Development Value: On -; Production value: On -; http://php.net/html-errors -html_errors = Off - -; If html_errors is set to On *and* docref_root is not empty, then PHP -; produces clickable error messages that direct to a page describing the error -; or function causing the error in detail. -; You can download a copy of the PHP manual from http://php.net/docs -; and change docref_root to the base URL of your local copy including the -; leading '/'. You must also specify the file extension being used including -; the dot. PHP's default behavior is to leave these settings empty, in which -; case no links to documentation are generated. -; Note: Never use this feature for production boxes. -; http://php.net/docref-root -; Examples -;docref_root = "/phpmanual/" - -; http://php.net/docref-ext -;docref_ext = .html - -; String to output before an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-prepend-string -; Example: -;error_prepend_string = "" - -; String to output after an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-append-string -; Example: -;error_append_string = "" - -; Log errors to specified file. PHP's default behavior is to leave this value -; empty. -; http://php.net/error-log -; Example: -error_log = /var/log/php5_errors.log -; Log errors to syslog (Event Log on NT, not valid in Windows 95). -;error_log = syslog - -;windows.show_crt_warning -; Default value: 0 -; Development value: 0 -; Production value: 0 - -;;;;;;;;;;;;;;;;; -; Data Handling ; -;;;;;;;;;;;;;;;;; - -; The separator used in PHP generated URLs to separate arguments. -; PHP's default setting is "&". -; http://php.net/arg-separator.output -; Example: -;arg_separator.output = "&" - -; List of separator(s) used by PHP to parse input URLs into variables. -; PHP's default setting is "&". -; NOTE: Every character in this directive is considered as separator! -; http://php.net/arg-separator.input -; Example: -;arg_separator.input = ";&" - -; This directive determines which super global arrays are registered when PHP -; starts up. G,P,C,E & S are abbreviations for the following respective super -; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty -; paid for the registration of these arrays and because ENV is not as commonly -; used as the others, ENV is not recommended on productions servers. You -; can still get access to the environment variables through getenv() should you -; need to. -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS"; -; http://php.net/variables-order -variables_order = "GPCS" - -; This directive determines which super global data (G,P,C,E & S) should -; be registered into the super global array REQUEST. If so, it also determines -; the order in which that data is registered. The values for this directive are -; specified in the same manner as the variables_order directive, EXCEPT one. -; Leaving this value empty will cause PHP to use the value set in the -; variables_order directive. It does not mean it will leave the super globals -; array REQUEST empty. -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" -; http://php.net/request-order -request_order = "GP" - -; This directive determines whether PHP registers $argv & $argc each time it -; runs. $argv contains an array of all the arguments passed to PHP when a script -; is invoked. $argc contains an integer representing the number of arguments -; that were passed when the script was invoked. These arrays are extremely -; useful when running scripts from the command line. When this directive is -; enabled, registering these variables consumes CPU cycles and memory each time -; a script is executed. For performance reasons, this feature should be disabled -; on production servers. -; Note: This directive is hardcoded to On for the CLI SAPI -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/register-argc-argv -register_argc_argv = Off - -; When enabled, the ENV, REQUEST and SERVER variables are created when they're -; first used (Just In Time) instead of when the script starts. If these -; variables are not used within a script, having this directive on will result -; in a performance gain. The PHP directive register_argc_argv must be disabled -; for this directive to have any affect. -; http://php.net/auto-globals-jit -auto_globals_jit = On - -; Whether PHP will read the POST data. -; This option is enabled by default. -; Most likely, you won't want to disable this option globally. It causes $_POST -; and $_FILES to always be empty; the only way you will be able to read the -; POST data will be through the php://input stream wrapper. This can be useful -; to proxy requests or to process the POST data in a memory efficient fashion. -; http://php.net/enable-post-data-reading -;enable_post_data_reading = Off - -; Maximum size of POST data that PHP will accept. -; Its value may be 0 to disable the limit. It is ignored if POST data reading -; is disabled through enable_post_data_reading. -; http://php.net/post-max-size -post_max_size = 8M - -; Automatically add files before PHP document. -; http://php.net/auto-prepend-file -auto_prepend_file = - -; Automatically add files after PHP document. -; http://php.net/auto-append-file -auto_append_file = - -; By default, PHP will output a character encoding using -; the Content-type: header. To disable sending of the charset, simply -; set it to be empty. -; -; PHP's built-in default is text/html -; http://php.net/default-mimetype -default_mimetype = "text/html" - -; PHP's default character set is set to empty. -; http://php.net/default-charset -;default_charset = "UTF-8" - -; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is -; to disable this feature. If post reading is disabled through -; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated. -; http://php.net/always-populate-raw-post-data -;always_populate_raw_post_data = On - -;;;;;;;;;;;;;;;;;;;;;;;;; -; Paths and Directories ; -;;;;;;;;;;;;;;;;;;;;;;;;; - -; UNIX: "/path1:/path2" -;include_path = ".:/usr/share/php" -; -; Windows: "\path1;\path2" -;include_path = ".;c:\php\includes" -; -; PHP's default setting for include_path is ".;/path/to/php/pear" -; http://php.net/include-path - -; The root of the PHP pages, used only if nonempty. -; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root -; if you are running php as a CGI under any web server (other than IIS) -; see documentation for security issues. The alternate is to use the -; cgi.force_redirect configuration below -; http://php.net/doc-root -doc_root = - -; The directory under which PHP opens the script using /~username used only -; if nonempty. -; http://php.net/user-dir -user_dir = - -; Directory in which the loadable extensions (modules) reside. -; http://php.net/extension-dir -; extension_dir = "./" -; On windows: -; extension_dir = "ext" - -; Directory where the temporary files should be placed. -; Defaults to the system default (see sys_get_temp_dir) -; sys_temp_dir = "/tmp" - -; Whether or not to enable the dl() function. The dl() function does NOT work -; properly in multithreaded servers, such as IIS or Zeus, and is automatically -; disabled on them. -; http://php.net/enable-dl -enable_dl = Off - -; cgi.force_redirect is necessary to provide security running PHP as a CGI under -; most web servers. Left undefined, PHP turns this on by default. You can -; turn it off here AT YOUR OWN RISK -; **You CAN safely turn this off for IIS, in fact, you MUST.** -; http://php.net/cgi.force-redirect -;cgi.force_redirect = 1 - -; if cgi.nph is enabled it will force cgi to always sent Status: 200 with -; every request. PHP's default behavior is to disable this feature. -;cgi.nph = 1 - -; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape -; (iPlanet) web servers, you MAY need to set an environment variable name that PHP -; will look for to know it is OK to continue execution. Setting this variable MAY -; cause security issues, KNOW WHAT YOU ARE DOING FIRST. -; http://php.net/cgi.redirect-status-env -;cgi.redirect_status_env = - -; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's -; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok -; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting -; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting -; of zero causes PHP to behave as before. Default is 1. You should fix your scripts -; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. -; http://php.net/cgi.fix-pathinfo -cgi.fix_pathinfo=1 - -; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate -; security tokens of the calling client. This allows IIS to define the -; security context that the request runs under. mod_fastcgi under Apache -; does not currently support this feature (03/17/2002) -; Set to 1 if running under IIS. Default is zero. -; http://php.net/fastcgi.impersonate -;fastcgi.impersonate = 1 - -; Disable logging through FastCGI connection. PHP's default behavior is to enable -; this feature. -;fastcgi.logging = 0 - -; cgi.rfc2616_headers configuration option tells PHP what type of headers to -; use when sending HTTP response code. If it's set 0 PHP sends Status: header that -; is supported by Apache. When this option is set to 1 PHP will send -; RFC2616 compliant header. -; Default is zero. -; http://php.net/cgi.rfc2616-headers -;cgi.rfc2616_headers = 0 - -;;;;;;;;;;;;;;;; -; File Uploads ; -;;;;;;;;;;;;;;;; - -; Whether to allow HTTP file uploads. -; http://php.net/file-uploads -file_uploads = On - -; Temporary directory for HTTP uploaded files (will use system default if not -; specified). -; http://php.net/upload-tmp-dir -;upload_tmp_dir = - -; Maximum allowed size for uploaded files. -; http://php.net/upload-max-filesize -upload_max_filesize = 2M - -; Maximum number of files that can be uploaded via a single request -max_file_uploads = 20 - -;;;;;;;;;;;;;;;;;; -; Fopen wrappers ; -;;;;;;;;;;;;;;;;;; - -; Whether to allow the treatment of URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-fopen -allow_url_fopen = On - -; Whether to allow include/require to open URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-include -allow_url_include = Off - -; Define the anonymous ftp password (your email address). PHP's default setting -; for this is empty. -; http://php.net/from -;from="john@doe.com" - -; Define the User-Agent string. PHP's default setting for this is empty. -; http://php.net/user-agent -;user_agent="PHP" - -; Default timeout for socket based streams (seconds) -; http://php.net/default-socket-timeout -default_socket_timeout = 5 - -; If your scripts have to deal with files from Macintosh systems, -; or you are running on a Mac and need to deal with files from -; unix or win32 systems, setting this flag will cause PHP to -; automatically detect the EOL character in those files so that -; fgets() and file() will work regardless of the source of the file. -; http://php.net/auto-detect-line-endings -;auto_detect_line_endings = Off - -;;;;;;;;;;;;;;;;;;;;;; -; Dynamic Extensions ; -;;;;;;;;;;;;;;;;;;;;;; - -; If you wish to have an extension loaded automatically, use the following -; syntax: -; -; extension=modulename.extension -; -; For example, on Windows: -; -; extension=msql.dll -; -; ... or under UNIX: -; -; extension=msql.so -; -; ... or with a path: -; -; extension=/path/to/extension/msql.so -; -; If you only provide the name of the extension, PHP will look for it in its -; default extension directory. -; - -;;;;;;;;;;;;;;;;;;; -; Module Settings ; -;;;;;;;;;;;;;;;;;;; - -[CLI Server] -; Whether the CLI web server uses ANSI color coding in its terminal output. -cli_server.color = On - -[Date] -; Defines the default timezone used by the date functions -; http://php.net/date.timezone -date.timezone = 'UTC' - -; http://php.net/date.default-latitude -;date.default_latitude = 31.7667 - -; http://php.net/date.default-longitude -;date.default_longitude = 35.2333 - -; http://php.net/date.sunrise-zenith -;date.sunrise_zenith = 90.583333 - -; http://php.net/date.sunset-zenith -;date.sunset_zenith = 90.583333 - -[filter] -; http://php.net/filter.default -;filter.default = unsafe_raw - -; http://php.net/filter.default-flags -;filter.default_flags = - -[iconv] -;iconv.input_encoding = ISO-8859-1 -;iconv.internal_encoding = ISO-8859-1 -;iconv.output_encoding = ISO-8859-1 - -[intl] -;intl.default_locale = -; This directive allows you to produce PHP errors when some error -; happens within intl functions. The value is the level of the error produced. -; Default is 0, which does not produce any errors. -;intl.error_level = E_WARNING - -[sqlite] -; http://php.net/sqlite.assoc-case -;sqlite.assoc_case = 0 - -[sqlite3] -;sqlite3.extension_dir = - -[Pcre] -;PCRE library backtracking limit. -; http://php.net/pcre.backtrack-limit -;pcre.backtrack_limit=100000 - -;PCRE library recursion limit. -;Please note that if you set this value to a high number you may consume all -;the available process stack and eventually crash PHP (due to reaching the -;stack size limit imposed by the Operating System). -; http://php.net/pcre.recursion-limit -;pcre.recursion_limit=100000 - -[Pdo] -; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off" -; http://php.net/pdo-odbc.connection-pooling -;pdo_odbc.connection_pooling=strict - -;pdo_odbc.db2_instance_name - -[Pdo_mysql] -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/pdo_mysql.cache_size -pdo_mysql.cache_size = 2000 - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/pdo_mysql.default-socket -pdo_mysql.default_socket= - -[Phar] -; http://php.net/phar.readonly -;phar.readonly = On - -; http://php.net/phar.require-hash -;phar.require_hash = On - -;phar.cache_list = - -[mail function] -; For Win32 only. -; http://php.net/smtp -SMTP = localhost -; http://php.net/smtp-port -smtp_port = 25 - -; For Win32 only. -; http://php.net/sendmail-from -;sendmail_from = me@example.com - -; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). -; http://php.net/sendmail-path -;sendmail_path = - -; Force the addition of the specified parameters to be passed as extra parameters -; to the sendmail binary. These parameters will always replace the value of -; the 5th parameter to mail(), even in safe mode. -;mail.force_extra_parameters = - -; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename -mail.add_x_header = On - -; The path to a log file that will log all mail() calls. Log entries include -; the full path of the script, line number, To address and headers. -;mail.log = -; Log mail to syslog (Event Log on NT, not valid in Windows 95). -;mail.log = syslog - -[SQL] -; http://php.net/sql.safe-mode -sql.safe_mode = Off - -[ODBC] -; http://php.net/odbc.default-db -;odbc.default_db = Not yet implemented - -; http://php.net/odbc.default-user -;odbc.default_user = Not yet implemented - -; http://php.net/odbc.default-pw -;odbc.default_pw = Not yet implemented - -; Controls the ODBC cursor model. -; Default: SQL_CURSOR_STATIC (default). -;odbc.default_cursortype - -; Allow or prevent persistent links. -; http://php.net/odbc.allow-persistent -odbc.allow_persistent = On - -; Check that a connection is still valid before reuse. -; http://php.net/odbc.check-persistent -odbc.check_persistent = On - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/odbc.max-persistent -odbc.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/odbc.max-links -odbc.max_links = -1 - -; Handling of LONG fields. Returns number of bytes to variables. 0 means -; passthru. -; http://php.net/odbc.defaultlrl -odbc.defaultlrl = 4096 - -; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. -; See the documentation on odbc_binmode and odbc_longreadlen for an explanation -; of odbc.defaultlrl and odbc.defaultbinmode -; http://php.net/odbc.defaultbinmode -odbc.defaultbinmode = 1 - -;birdstep.max_links = -1 - -[Interbase] -; Allow or prevent persistent links. -ibase.allow_persistent = 1 - -; Maximum number of persistent links. -1 means no limit. -ibase.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -ibase.max_links = -1 - -; Default database name for ibase_connect(). -;ibase.default_db = - -; Default username for ibase_connect(). -;ibase.default_user = - -; Default password for ibase_connect(). -;ibase.default_password = - -; Default charset for ibase_connect(). -;ibase.default_charset = - -; Default timestamp format. -ibase.timestampformat = "%Y-%m-%d %H:%M:%S" - -; Default date format. -ibase.dateformat = "%Y-%m-%d" - -; Default time format. -ibase.timeformat = "%H:%M:%S" - -[MySQL] -; Allow accessing, from PHP's perspective, local files with LOAD DATA statements -; http://php.net/mysql.allow_local_infile -mysql.allow_local_infile = On - -; Allow or prevent persistent links. -; http://php.net/mysql.allow-persistent -mysql.allow_persistent = On - -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/mysql.cache_size -mysql.cache_size = 2000 - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/mysql.max-persistent -mysql.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/mysql.max-links -mysql.max_links = -1 - -; Default port number for mysql_connect(). If unset, mysql_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -; http://php.net/mysql.default-port -mysql.default_port = - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/mysql.default-socket -mysql.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysql.default-host -mysql.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysql.default-user -mysql.default_user = - -; Default password for mysql_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -; http://php.net/mysql.default-password -mysql.default_password = - -; Maximum time (in seconds) for connect timeout. -1 means no limit -; http://php.net/mysql.connect-timeout -mysql.connect_timeout = 60 - -; Trace mode. When trace_mode is active (=On), warnings for table/index scans and -; SQL-Errors will be displayed. -; http://php.net/mysql.trace-mode -mysql.trace_mode = Off - -[MySQLi] - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/mysqli.max-persistent -mysqli.max_persistent = -1 - -; Allow accessing, from PHP's perspective, local files with LOAD DATA statements -; http://php.net/mysqli.allow_local_infile -;mysqli.allow_local_infile = On - -; Allow or prevent persistent links. -; http://php.net/mysqli.allow-persistent -mysqli.allow_persistent = On - -; Maximum number of links. -1 means no limit. -; http://php.net/mysqli.max-links -mysqli.max_links = -1 - -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/mysqli.cache_size -mysqli.cache_size = 2000 - -; Default port number for mysqli_connect(). If unset, mysqli_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -; http://php.net/mysqli.default-port -mysqli.default_port = 3306 - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/mysqli.default-socket -mysqli.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-host -mysqli.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-user -mysqli.default_user = - -; Default password for mysqli_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -; http://php.net/mysqli.default-pw -mysqli.default_pw = - -; Allow or prevent reconnect -mysqli.reconnect = Off - -[mysqlnd] -; Enable / Disable collection of general statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -; http://php.net/mysqlnd.collect_statistics -mysqlnd.collect_statistics = On - -; Enable / Disable collection of memory usage statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -; http://php.net/mysqlnd.collect_memory_statistics -mysqlnd.collect_memory_statistics = Off - -; Size of a pre-allocated buffer used when sending commands to MySQL in bytes. -; http://php.net/mysqlnd.net_cmd_buffer_size -;mysqlnd.net_cmd_buffer_size = 2048 - -; Size of a pre-allocated buffer used for reading data sent by the server in -; bytes. -; http://php.net/mysqlnd.net_read_buffer_size -;mysqlnd.net_read_buffer_size = 32768 - -[OCI8] - -; Connection: Enables privileged connections using external -; credentials (OCI_SYSOPER, OCI_SYSDBA) -; http://php.net/oci8.privileged-connect -;oci8.privileged_connect = Off - -; Connection: The maximum number of persistent OCI8 connections per -; process. Using -1 means no limit. -; http://php.net/oci8.max-persistent -;oci8.max_persistent = -1 - -; Connection: The maximum number of seconds a process is allowed to -; maintain an idle persistent connection. Using -1 means idle -; persistent connections will be maintained forever. -; http://php.net/oci8.persistent-timeout -;oci8.persistent_timeout = -1 - -; Connection: The number of seconds that must pass before issuing a -; ping during oci_pconnect() to check the connection validity. When -; set to 0, each oci_pconnect() will cause a ping. Using -1 disables -; pings completely. -; http://php.net/oci8.ping-interval -;oci8.ping_interval = 60 - -; Connection: Set this to a user chosen connection class to be used -; for all pooled server requests with Oracle 11g Database Resident -; Connection Pooling (DRCP). To use DRCP, this value should be set to -; the same string for all web servers running the same application, -; the database pool must be configured, and the connection string must -; specify to use a pooled server. -;oci8.connection_class = - -; High Availability: Using On lets PHP receive Fast Application -; Notification (FAN) events generated when a database node fails. The -; database must also be configured to post FAN events. -;oci8.events = Off - -; Tuning: This option enables statement caching, and specifies how -; many statements to cache. Using 0 disables statement caching. -; http://php.net/oci8.statement-cache-size -;oci8.statement_cache_size = 20 - -; Tuning: Enables statement prefetching and sets the default number of -; rows that will be fetched automatically after statement execution. -; http://php.net/oci8.default-prefetch -;oci8.default_prefetch = 100 - -; Compatibility. Using On means oci_close() will not close -; oci_connect() and oci_new_connect() connections. -; http://php.net/oci8.old-oci-close-semantics -;oci8.old_oci_close_semantics = Off - -[PostgreSQL] -; Allow or prevent persistent links. -; http://php.net/pgsql.allow-persistent -pgsql.allow_persistent = On - -; Detect broken persistent links always with pg_pconnect(). -; Auto reset feature requires a little overheads. -; http://php.net/pgsql.auto-reset-persistent -pgsql.auto_reset_persistent = Off - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/pgsql.max-persistent -pgsql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -; http://php.net/pgsql.max-links -pgsql.max_links = -1 - -; Ignore PostgreSQL backends Notice message or not. -; Notice message logging require a little overheads. -; http://php.net/pgsql.ignore-notice -pgsql.ignore_notice = 0 - -; Log PostgreSQL backends Notice message or not. -; Unless pgsql.ignore_notice=0, module cannot log notice message. -; http://php.net/pgsql.log-notice -pgsql.log_notice = 0 - -[Sybase-CT] -; Allow or prevent persistent links. -; http://php.net/sybct.allow-persistent -sybct.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/sybct.max-persistent -sybct.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/sybct.max-links -sybct.max_links = -1 - -; Minimum server message severity to display. -; http://php.net/sybct.min-server-severity -sybct.min_server_severity = 10 - -; Minimum client message severity to display. -; http://php.net/sybct.min-client-severity -sybct.min_client_severity = 10 - -; Set per-context timeout -; http://php.net/sybct.timeout -;sybct.timeout= - -;sybct.packet_size - -; The maximum time in seconds to wait for a connection attempt to succeed before returning failure. -; Default: one minute -;sybct.login_timeout= - -; The name of the host you claim to be connecting from, for display by sp_who. -; Default: none -;sybct.hostname= - -; Allows you to define how often deadlocks are to be retried. -1 means "forever". -; Default: 0 -;sybct.deadlock_retry_count= - -[bcmath] -; Number of decimal digits for all bcmath functions. -; http://php.net/bcmath.scale -bcmath.scale = 0 - -[browscap] -; http://php.net/browscap -;browscap = extra/browscap.ini - -[Session] -; Handler used to store/retrieve data. -; http://php.net/session.save-handler -session.save_handler = files - -; Argument passed to save_handler. In the case of files, this is the path -; where data files are stored. Note: Windows users have to change this -; variable in order to use PHP's session functions. -; -; The path can be defined as: -; -; session.save_path = "N;/path" -; -; where N is an integer. Instead of storing all the session files in -; /path, what this will do is use subdirectories N-levels deep, and -; store the session data in those directories. This is useful if you -; or your OS have problems with lots of files in one directory, and is -; a more efficient layout for servers that handle lots of sessions. -; -; NOTE 1: PHP will not create this directory structure automatically. -; You can use the script in the ext/session dir for that purpose. -; NOTE 2: See the section on garbage collection below if you choose to -; use subdirectories for session storage -; -; The file storage module creates files using mode 600 by default. -; You can change that by using -; -; session.save_path = "N;MODE;/path" -; -; where MODE is the octal representation of the mode. Note that this -; does not overwrite the process's umask. -; http://php.net/session.save-path -;session.save_path = "/var/lib/php5" - -; Whether to use strict session mode. -; Strict session mode does not accept uninitialized session ID and regenerate -; session ID if browser sends uninitialized session ID. Strict mode protects -; applications from session fixation via session adoption vulnerability. It is -; disabled by default for maximum compatibility, but enabling it is encouraged. -; https://wiki.php.net/rfc/strict_sessions -session.use_strict_mode = 0 - -; Whether to use cookies. -; http://php.net/session.use-cookies -session.use_cookies = 1 - -; http://php.net/session.cookie-secure -;session.cookie_secure = - -; This option forces PHP to fetch and use a cookie for storing and maintaining -; the session id. We encourage this operation as it's very helpful in combating -; session hijacking when not specifying and managing your own session id. It is -; not the end all be all of session hijacking defense, but it's a good start. -; http://php.net/session.use-only-cookies -session.use_only_cookies = 1 - -; Name of the session (used as cookie name). -; http://php.net/session.name -session.name = PHPSESSID - -; Initialize session on request startup. -; http://php.net/session.auto-start -session.auto_start = 0 - -; Lifetime in seconds of cookie or, if 0, until browser is restarted. -; http://php.net/session.cookie-lifetime -session.cookie_lifetime = 0 - -; The path for which the cookie is valid. -; http://php.net/session.cookie-path -session.cookie_path = / - -; The domain for which the cookie is valid. -; http://php.net/session.cookie-domain -session.cookie_domain = - -; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript. -; http://php.net/session.cookie-httponly -session.cookie_httponly = - -; Handler used to serialize data. php is the standard serializer of PHP. -; http://php.net/session.serialize-handler -session.serialize_handler = php - -; Defines the probability that the 'garbage collection' process is started -; on every session initialization. The probability is calculated by using -; gc_probability/gc_divisor. Where session.gc_probability is the numerator -; and gc_divisor is the denominator in the equation. Setting this value to 1 -; when the session.gc_divisor value is 100 will give you approximately a 1% chance -; the gc will run on any give request. -; Default Value: 1 -; Development Value: 1 -; Production Value: 1 -; http://php.net/session.gc-probability -session.gc_probability = 0 - -; Defines the probability that the 'garbage collection' process is started on every -; session initialization. The probability is calculated by using the following equation: -; gc_probability/gc_divisor. Where session.gc_probability is the numerator and -; session.gc_divisor is the denominator in the equation. Setting this value to 1 -; when the session.gc_divisor value is 100 will give you approximately a 1% chance -; the gc will run on any give request. Increasing this value to 1000 will give you -; a 0.1% chance the gc will run on any give request. For high volume production servers, -; this is a more efficient approach. -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 -; http://php.net/session.gc-divisor -session.gc_divisor = 1000 - -; After this number of seconds, stored data will be seen as 'garbage' and -; cleaned up by the garbage collection process. -; http://php.net/session.gc-maxlifetime -session.gc_maxlifetime = 1440 - -; NOTE: If you are using the subdirectory option for storing session files -; (see session.save_path above), then garbage collection does *not* -; happen automatically. You will need to do your own garbage -; collection through a shell script, cron entry, or some other method. -; For example, the following script would is the equivalent of -; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): -; find /path/to/sessions -cmin +24 -type f | xargs rm - -; PHP 4.2 and less have an undocumented feature/bug that allows you to -; to initialize a session variable in the global scope. -; PHP 4.3 and later will warn you, if this feature is used. -; You can disable the feature and the warning separately. At this time, -; the warning is only displayed, if bug_compat_42 is enabled. This feature -; introduces some serious security problems if not handled correctly. It's -; recommended that you do not use this feature on production servers. But you -; should enable this on development servers and enable the warning as well. If you -; do not enable the feature on development servers, you won't be warned when it's -; used and debugging errors caused by this can be difficult to track down. -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/session.bug-compat-42 -session.bug_compat_42 = Off - -; This setting controls whether or not you are warned by PHP when initializing a -; session value into the global space. session.bug_compat_42 must be enabled before -; these warnings can be issued by PHP. See the directive above for more information. -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/session.bug-compat-warn -session.bug_compat_warn = Off - -; Check HTTP Referer to invalidate externally stored URLs containing ids. -; HTTP_REFERER has to contain this substring for the session to be -; considered as valid. -; http://php.net/session.referer-check -session.referer_check = - -; How many bytes to read from the file. -; http://php.net/session.entropy-length -;session.entropy_length = 32 - -; Specified here to create the session id. -; http://php.net/session.entropy-file -; Defaults to /dev/urandom -; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom -; If neither are found at compile time, the default is no entropy file. -; On windows, setting the entropy_length setting will activate the -; Windows random source (using the CryptoAPI) -;session.entropy_file = /dev/urandom - -; Set to {nocache,private,public,} to determine HTTP caching aspects -; or leave this empty to avoid sending anti-caching headers. -; http://php.net/session.cache-limiter -session.cache_limiter = nocache - -; Document expires after n minutes. -; http://php.net/session.cache-expire -session.cache_expire = 180 - -; trans sid support is disabled by default. -; Use of trans sid may risk your users security. -; Use this option with caution. -; - User may send URL contains active session ID -; to other person via. email/irc/etc. -; - URL that contains active session ID may be stored -; in publicly accessible computer. -; - User may access your site with the same session ID -; always using URL stored in browser's history or bookmarks. -; http://php.net/session.use-trans-sid -session.use_trans_sid = 0 - -; Select a hash function for use in generating session ids. -; Possible Values -; 0 (MD5 128 bits) -; 1 (SHA-1 160 bits) -; This option may also be set to the name of any hash function supported by -; the hash extension. A list of available hashes is returned by the hash_algos() -; function. -; http://php.net/session.hash-function -session.hash_function = 0 - -; Define how many bits are stored in each character when converting -; the binary hash data to something readable. -; Possible values: -; 4 (4 bits: 0-9, a-f) -; 5 (5 bits: 0-9, a-v) -; 6 (6 bits: 0-9, a-z, A-Z, "-", ",") -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 -; http://php.net/session.hash-bits-per-character -session.hash_bits_per_character = 5 - -; The URL rewriter will look for URLs in a defined set of HTML tags. -; form/fieldset are special; if you include them here, the rewriter will -; add a hidden field with the info which is otherwise appended -; to URLs. If you want XHTML conformity, remove the form entry. -; Note that all valid entries require a "=", even if no value follows. -; Default Value: "a=href,area=href,frame=src,form=,fieldset=" -; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" -; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" -; http://php.net/url-rewriter.tags -url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" - -; Enable upload progress tracking in $_SESSION -; Default Value: On -; Development Value: On -; Production Value: On -; http://php.net/session.upload-progress.enabled -;session.upload_progress.enabled = On - -; Cleanup the progress information as soon as all POST data has been read -; (i.e. upload completed). -; Default Value: On -; Development Value: On -; Production Value: On -; http://php.net/session.upload-progress.cleanup -;session.upload_progress.cleanup = On - -; A prefix used for the upload progress key in $_SESSION -; Default Value: "upload_progress_" -; Development Value: "upload_progress_" -; Production Value: "upload_progress_" -; http://php.net/session.upload-progress.prefix -;session.upload_progress.prefix = "upload_progress_" - -; The index name (concatenated with the prefix) in $_SESSION -; containing the upload progress information -; Default Value: "PHP_SESSION_UPLOAD_PROGRESS" -; Development Value: "PHP_SESSION_UPLOAD_PROGRESS" -; Production Value: "PHP_SESSION_UPLOAD_PROGRESS" -; http://php.net/session.upload-progress.name -;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS" - -; How frequently the upload progress should be updated. -; Given either in percentages (per-file), or in bytes -; Default Value: "1%" -; Development Value: "1%" -; Production Value: "1%" -; http://php.net/session.upload-progress.freq -;session.upload_progress.freq = "1%" - -; The minimum delay between updates, in seconds -; Default Value: 1 -; Development Value: 1 -; Production Value: 1 -; http://php.net/session.upload-progress.min-freq -;session.upload_progress.min_freq = "1" - -[MSSQL] -; Allow or prevent persistent links. -mssql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -mssql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -mssql.max_links = -1 - -; Minimum error severity to display. -mssql.min_error_severity = 10 - -; Minimum message severity to display. -mssql.min_message_severity = 10 - -; Compatibility mode with old versions of PHP 3.0. -mssql.compatibility_mode = Off - -; Connect timeout -;mssql.connect_timeout = 5 - -; Query timeout -;mssql.timeout = 60 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textlimit = 4096 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textsize = 4096 - -; Limits the number of records in each batch. 0 = all records in one batch. -;mssql.batchsize = 0 - -; Specify how datetime and datetim4 columns are returned -; On => Returns data converted to SQL server settings -; Off => Returns values as YYYY-MM-DD hh:mm:ss -;mssql.datetimeconvert = On - -; Use NT authentication when connecting to the server -mssql.secure_connection = Off - -; Specify max number of processes. -1 = library default -; msdlib defaults to 25 -; FreeTDS defaults to 4096 -;mssql.max_procs = -1 - -; Specify client character set. -; If empty or not set the client charset from freetds.conf is used -; This is only used when compiled with FreeTDS -;mssql.charset = "ISO-8859-1" - -[Assertion] -; Assert(expr); active by default. -; http://php.net/assert.active -;assert.active = On - -; Issue a PHP warning for each failed assertion. -; http://php.net/assert.warning -;assert.warning = On - -; Don't bail out by default. -; http://php.net/assert.bail -;assert.bail = Off - -; User-function to be called if an assertion fails. -; http://php.net/assert.callback -;assert.callback = 0 - -; Eval the expression with current error_reporting(). Set to true if you want -; error_reporting(0) around the eval(). -; http://php.net/assert.quiet-eval -;assert.quiet_eval = 0 - -[COM] -; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs -; http://php.net/com.typelib-file -;com.typelib_file = - -; allow Distributed-COM calls -; http://php.net/com.allow-dcom -;com.allow_dcom = true - -; autoregister constants of a components typlib on com_load() -; http://php.net/com.autoregister-typelib -;com.autoregister_typelib = true - -; register constants casesensitive -; http://php.net/com.autoregister-casesensitive -;com.autoregister_casesensitive = false - -; show warnings on duplicate constant registrations -; http://php.net/com.autoregister-verbose -;com.autoregister_verbose = true - -; The default character set code-page to use when passing strings to and from COM objects. -; Default: system ANSI code page -;com.code_page= - -[mbstring] -; language for internal character representation. -; http://php.net/mbstring.language -;mbstring.language = Japanese - -; internal/script encoding. -; Some encoding cannot work as internal encoding. -; (e.g. SJIS, BIG5, ISO-2022-*) -; http://php.net/mbstring.internal-encoding -;mbstring.internal_encoding = UTF-8 - -; http input encoding. -; http://php.net/mbstring.http-input -;mbstring.http_input = UTF-8 - -; http output encoding. mb_output_handler must be -; registered as output buffer to function -; http://php.net/mbstring.http-output -;mbstring.http_output = pass - -; enable automatic encoding translation according to -; mbstring.internal_encoding setting. Input chars are -; converted to internal encoding by setting this to On. -; Note: Do _not_ use automatic encoding translation for -; portable libs/applications. -; http://php.net/mbstring.encoding-translation -;mbstring.encoding_translation = Off - -; automatic encoding detection order. -; auto means -; http://php.net/mbstring.detect-order -;mbstring.detect_order = auto - -; substitute_character used when character cannot be converted -; one from another -; http://php.net/mbstring.substitute-character -;mbstring.substitute_character = none - -; overload(replace) single byte functions by mbstring functions. -; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), -; etc. Possible values are 0,1,2,4 or combination of them. -; For example, 7 for overload everything. -; 0: No overload -; 1: Overload mail() function -; 2: Overload str*() functions -; 4: Overload ereg*() functions -; http://php.net/mbstring.func-overload -;mbstring.func_overload = 0 - -; enable strict encoding detection. -;mbstring.strict_detection = On - -; This directive specifies the regex pattern of content types for which mb_output_handler() -; is activated. -; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml) -;mbstring.http_output_conv_mimetype= - -[gd] -; Tell the jpeg decode to ignore warnings and try to create -; a gd image. The warning will then be displayed as notices -; disabled by default -; http://php.net/gd.jpeg-ignore-warning -;gd.jpeg_ignore_warning = 0 - -[exif] -; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. -; With mbstring support this will automatically be converted into the encoding -; given by corresponding encode setting. When empty mbstring.internal_encoding -; is used. For the decode settings you can distinguish between motorola and -; intel byte order. A decode setting cannot be empty. -; http://php.net/exif.encode-unicode -;exif.encode_unicode = ISO-8859-15 - -; http://php.net/exif.decode-unicode-motorola -;exif.decode_unicode_motorola = UCS-2BE - -; http://php.net/exif.decode-unicode-intel -;exif.decode_unicode_intel = UCS-2LE - -; http://php.net/exif.encode-jis -;exif.encode_jis = - -; http://php.net/exif.decode-jis-motorola -;exif.decode_jis_motorola = JIS - -; http://php.net/exif.decode-jis-intel -;exif.decode_jis_intel = JIS - -[Tidy] -; The path to a default tidy configuration file to use when using tidy -; http://php.net/tidy.default-config -;tidy.default_config = /usr/local/lib/php/default.tcfg - -; Should tidy clean and repair output automatically? -; WARNING: Do not use this option if you are generating non-html content -; such as dynamic images -; http://php.net/tidy.clean-output -tidy.clean_output = Off - -[soap] -; Enables or disables WSDL caching feature. -; http://php.net/soap.wsdl-cache-enabled -soap.wsdl_cache_enabled=1 - -; Sets the directory name where SOAP extension will put cache files. -; http://php.net/soap.wsdl-cache-dir -soap.wsdl_cache_dir="/tmp" - -; (time to live) Sets the number of second while cached file will be used -; instead of original one. -; http://php.net/soap.wsdl-cache-ttl -soap.wsdl_cache_ttl=86400 - -; Sets the size of the cache limit. (Max. number of WSDL files to cache) -soap.wsdl_cache_limit = 5 - -[sysvshm] -; A default size of the shared memory segment -;sysvshm.init_mem = 10000 - -[ldap] -; Sets the maximum number of open links or -1 for unlimited. -ldap.max_links = -1 - -[mcrypt] -; For more information about mcrypt settings see http://php.net/mcrypt-module-open - -; Directory where to load mcrypt algorithms -; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) -;mcrypt.algorithms_dir= - -; Directory where to load mcrypt modes -; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt) -;mcrypt.modes_dir= - -[dba] -;dba.default_handler= - -[opcache] -; Determines if Zend OPCache is enabled -opcache.enable=1 - -; Determines if Zend OPCache is enabled for the CLI version of PHP -opcache.enable_cli=0 - -; The OPcache shared memory storage size. -opcache.memory_consumption=2048 - -; The amount of memory for interned strings in Mbytes. -opcache.interned_strings_buffer=16 - -; The maximum number of keys (scripts) in the OPcache hash table. -; Only numbers between 200 and 100000 are allowed. -opcache.max_accelerated_files=100000 - -; The maximum percentage of "wasted" memory until a restart is scheduled. -;opcache.max_wasted_percentage=5 - -; When this directive is enabled, the OPcache appends the current working -; directory to the script key, thus eliminating possible collisions between -; files with the same name (basename). Disabling the directive improves -; performance, but may break existing applications. -;opcache.use_cwd=1 - -; When disabled, you must reset the OPcache manually or restart the -; webserver for changes to the filesystem to take effect. -opcache.validate_timestamps=0 - -; How often (in seconds) to check file timestamps for changes to the shared -; memory storage allocation. ("1" means validate once per second, but only -; once per request. "0" means always validate) -opcache.revalidate_freq=0 - -; Enables or disables file search in include_path optimization -;opcache.revalidate_path=0 - -; If disabled, all PHPDoc comments are dropped from the code to reduce the -; size of the optimized code. -opcache.save_comments=1 - -; If disabled, PHPDoc comments are not loaded from SHM, so "Doc Comments" -; may be always stored (save_comments=1), but not loaded by applications -; that don't need them anyway. -opcache.load_comments=1 - -; If enabled, a fast shutdown sequence is used for the accelerated code -opcache.fast_shutdown=1 - -; Allow file existence override (file_exists, etc.) performance feature. -;opcache.enable_file_override=0 - -; A bitmask, where each bit enables or disables the appropriate OPcache -; passes -;opcache.optimization_level=0xffffffff - -;opcache.inherited_hack=1 -;opcache.dups_fix=0 - -; The location of the OPcache blacklist file (wildcards allowed). -; Each OPcache blacklist file is a text file that holds the names of files -; that should not be accelerated. The file format is to add each filename -; to a new line. The filename may be a full path or just a file prefix -; (i.e., /var/www/x blacklists all the files and directories in /var/www -; that start with 'x'). Line starting with a ; are ignored (comments). -;opcache.blacklist_filename= - -; Allows exclusion of large files from being cached. By default all files -; are cached. -;opcache.max_file_size=0 - -; Check the cache checksum each N requests. -; The default value of "0" means that the checks are disabled. -;opcache.consistency_checks=0 - -; How long to wait (in seconds) for a scheduled restart to begin if the cache -; is not being accessed. -;opcache.force_restart_timeout=180 - -; OPcache error_log file name. Empty string assumes "stderr". -opcache.error_log=/var/log/php5_opcache.log - -; All OPcache errors go to the Web server log. -; By default, only fatal errors (level 0) or errors (level 1) are logged. -; You can also enable warnings (level 2), info messages (level 3) or -; debug messages (level 4). -;opcache.log_verbosity_level=1 - -; Preferred Shared Memory back-end. Leave empty and let the system decide. -;opcache.preferred_memory_model= - -; Protect the shared memory from unexpected writing during script execution. -; Useful for internal debugging only. -;opcache.protect_memory=0 - -[curl] -; A default value for the CURLOPT_CAINFO option. This is required to be an -; absolute path. -;curl.cainfo = - -; Local Variables: -; tab-width: 4 -; End: diff --git a/files/php5/www.conf b/files/php5/www.conf deleted file mode 100644 index 7522ef7..0000000 --- a/files/php5/www.conf +++ /dev/null @@ -1,33 +0,0 @@ -[www] - -user = www-data -group = www-data -listen = 127.0.0.1:9000 - -listen.owner = www-data -listen.group = www-data - -pm = dynamic -# the maximum number of children that can be alive at the same time. -pm.max_children = 800 -# the number of children created on startup. -# pm.start_servers = min_spare_servers + (max_spare_servers - min_spare_servers) / 2 -pm.start_servers = 300 -# the minimum number of children in 'idle' -# state (waiting to process). If the number -# of 'idle' processes is less than this -# number then some children will be created. -pm.min_spare_servers = 256 -# the maximum number of children in 'idle' -# state (waiting to process). If the number -# of 'idle' processes is greater than this -# number then some children will be killed. -pm.max_spare_servers = 600 -pm.max_requests = 5000 - - -listen.backlog = -1 -request_terminate_timeout = 300s - -chdir = / - diff --git a/files/php7/php-fpm.conf b/files/php7/php-fpm.conf deleted file mode 100644 index a181ed4..0000000 --- a/files/php7/php-fpm.conf +++ /dev/null @@ -1,125 +0,0 @@ -;;;;;;;;;;;;;;;;;;;;; -; FPM Configuration ; -;;;;;;;;;;;;;;;;;;;;; - -; All relative paths in this configuration file are relative to PHP's install -; prefix (/usr). This prefix can be dynamically changed by using the -; '-p' argument from the command line. - -;;;;;;;;;;;;;;;;;; -; Global Options ; -;;;;;;;;;;;;;;;;;; - -[global] -; Pid file -; Note: the default prefix is /var -; Default Value: none -pid = /run/php/php7.2-fpm.pid - -; Error log file -; If it's set to "syslog", log is sent to syslogd instead of being written -; into a local file. -; Note: the default prefix is /var -; Default Value: log/php-fpm.log -error_log = /var/log/php7.2-fpm.log - -; syslog_facility is used to specify what type of program is logging the -; message. This lets syslogd specify that messages from different facilities -; will be handled differently. -; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON) -; Default Value: daemon -;syslog.facility = daemon - -; syslog_ident is prepended to every message. If you have multiple FPM -; instances running on the same server, you can change the default value -; which must suit common needs. -; Default Value: php-fpm -;syslog.ident = php-fpm - -; Log level -; Possible Values: alert, error, warning, notice, debug -; Default Value: notice -;log_level = notice - -; If this number of child processes exit with SIGSEGV or SIGBUS within the time -; interval set by emergency_restart_interval then FPM will restart. A value -; of '0' means 'Off'. -; Default Value: 0 -;emergency_restart_threshold = 0 - -; Interval of time used by emergency_restart_interval to determine when -; a graceful restart will be initiated. This can be useful to work around -; accidental corruptions in an accelerator's shared memory. -; Available Units: s(econds), m(inutes), h(ours), or d(ays) -; Default Unit: seconds -; Default Value: 0 -;emergency_restart_interval = 0 - -; Time limit for child processes to wait for a reaction on signals from master. -; Available units: s(econds), m(inutes), h(ours), or d(ays) -; Default Unit: seconds -; Default Value: 0 -;process_control_timeout = 0 - -; The maximum number of processes FPM will fork. This has been designed to control -; the global number of processes when using dynamic PM within a lot of pools. -; Use it with caution. -; Note: A value of 0 indicates no limit -; Default Value: 0 -; process.max = 128 - -; Specify the nice(2) priority to apply to the master process (only if set) -; The value can vary from -19 (highest priority) to 20 (lowest priority) -; Note: - It will only work if the FPM master process is launched as root -; - The pool process will inherit the master process priority -; unless specified otherwise -; Default Value: no set -; process.priority = -19 - -; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. -; Default Value: yes -;daemonize = yes - -; Set open file descriptor rlimit for the master process. -; Default Value: system defined value -;rlimit_files = 1024 - -; Set max core size rlimit for the master process. -; Possible Values: 'unlimited' or an integer greater or equal to 0 -; Default Value: system defined value -;rlimit_core = 0 - -; Specify the event mechanism FPM will use. The following is available: -; - select (any POSIX os) -; - poll (any POSIX os) -; - epoll (linux >= 2.5.44) -; - kqueue (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0) -; - /dev/poll (Solaris >= 7) -; - port (Solaris >= 10) -; Default Value: not set (auto detection) -;events.mechanism = epoll - -; When FPM is built with systemd integration, specify the interval, -; in seconds, between health report notification to systemd. -; Set to 0 to disable. -; Available Units: s(econds), m(inutes), h(ours) -; Default Unit: seconds -; Default value: 10 -;systemd_interval = 10 - -;;;;;;;;;;;;;;;;;;;; -; Pool Definitions ; -;;;;;;;;;;;;;;;;;;;; - -; Multiple pools of child processes may be started with different listening -; ports and different management options. The name of the pool will be -; used in logs and stats. There is no limitation on the number of pools which -; FPM can handle. Your system will tell you anyway :) - -; Include one or more files. If glob(3) exists, it is used to include a bunch of -; files from a glob(3) pattern. This directive can be used everywhere in the -; file. -; Relative path can also be used. They will be prefixed by: -; - the global prefix if it's been set (-p argument) -; - /usr otherwise -include=/etc/php/7.2/fpm/pool.d/*.conf diff --git a/files/php7/php.ini b/files/php7/php.ini deleted file mode 100644 index df40cb9..0000000 --- a/files/php7/php.ini +++ /dev/null @@ -1,1920 +0,0 @@ -[PHP] - -;;;;;;;;;;;;;;;;;;; -; About php.ini ; -;;;;;;;;;;;;;;;;;;; -; PHP's initialization file, generally called php.ini, is responsible for -; configuring many of the aspects of PHP's behavior. - -; PHP attempts to find and load this configuration from a number of locations. -; The following is a summary of its search order: -; 1. SAPI module specific location. -; 2. The PHPRC environment variable. (As of PHP 5.2.0) -; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0) -; 4. Current working directory (except CLI) -; 5. The web server's directory (for SAPI modules), or directory of PHP -; (otherwise in Windows) -; 6. The directory from the --with-config-file-path compile time option, or the -; Windows directory (C:\windows or C:\winnt) -; See the PHP docs for more specific information. -; http://php.net/configuration.file - -; The syntax of the file is extremely simple. Whitespace and lines -; beginning with a semicolon are silently ignored (as you probably guessed). -; Section headers (e.g. [Foo]) are also silently ignored, even though -; they might mean something in the future. - -; Directives following the section heading [PATH=/www/mysite] only -; apply to PHP files in the /www/mysite directory. Directives -; following the section heading [HOST=www.example.com] only apply to -; PHP files served from www.example.com. Directives set in these -; special sections cannot be overridden by user-defined INI files or -; at runtime. Currently, [PATH=] and [HOST=] sections only work under -; CGI/FastCGI. -; http://php.net/ini.sections - -; Directives are specified using the following syntax: -; directive = value -; Directive names are *case sensitive* - foo=bar is different from FOO=bar. -; Directives are variables used to configure PHP or PHP extensions. -; There is no name validation. If PHP can't find an expected -; directive because it is not set or is mistyped, a default value will be used. - -; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one -; of the INI constants (On, Off, True, False, Yes, No and None) or an expression -; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a -; previously set variable or directive (e.g. ${foo}) - -; Expressions in the INI file are limited to bitwise operators and parentheses: -; | bitwise OR -; ^ bitwise XOR -; & bitwise AND -; ~ bitwise NOT -; ! boolean NOT - -; Boolean flags can be turned on using the values 1, On, True or Yes. -; They can be turned off using the values 0, Off, False or No. - -; An empty string can be denoted by simply not writing anything after the equal -; sign, or by using the None keyword: - -; foo = ; sets foo to an empty string -; foo = None ; sets foo to an empty string -; foo = "None" ; sets foo to the string 'None' - -; If you use constants in your value, and these constants belong to a -; dynamically loaded extension (either a PHP extension or a Zend extension), -; you may only use these constants *after* the line that loads the extension. - -;;;;;;;;;;;;;;;;;;; -; About this file ; -;;;;;;;;;;;;;;;;;;; -; PHP comes packaged with two INI files. One that is recommended to be used -; in production environments and one that is recommended to be used in -; development environments. - -; php.ini-production contains settings which hold security, performance and -; best practices at its core. But please be aware, these settings may break -; compatibility with older or less security conscience applications. We -; recommending using the production ini in production and testing environments. - -; php.ini-development is very similar to its production variant, except it is -; much more verbose when it comes to errors. We recommend using the -; development version only in development environments, as errors shown to -; application users can inadvertently leak otherwise secure information. - -; This is php.ini-production INI file. - -;;;;;;;;;;;;;;;;;;; -; Quick Reference ; -;;;;;;;;;;;;;;;;;;; -; The following are all the settings which are different in either the production -; or development versions of the INIs with respect to PHP's default behavior. -; Please see the actual settings later in the document for more details as to why -; we recommend these changes in PHP's behavior. - -; display_errors -; Default Value: On -; Development Value: On -; Production Value: Off - -; display_startup_errors -; Default Value: Off -; Development Value: On -; Production Value: Off - -; error_reporting -; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED -; Development Value: E_ALL -; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT - -; html_errors -; Default Value: On -; Development Value: On -; Production value: On - -; log_errors -; Default Value: Off -; Development Value: On -; Production Value: On - -; max_input_time -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) - -; output_buffering -; Default Value: Off -; Development Value: 4096 -; Production Value: 4096 - -; register_argc_argv -; Default Value: On -; Development Value: Off -; Production Value: Off - -; request_order -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" - -; session.gc_divisor -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 - -; session.sid_bits_per_character -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 - -; short_open_tag -; Default Value: On -; Development Value: Off -; Production Value: Off - -; track_errors -; Default Value: Off -; Development Value: On -; Production Value: Off - -; variables_order -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS" - -;;;;;;;;;;;;;;;;;;;; -; php.ini Options ; -;;;;;;;;;;;;;;;;;;;; -; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini" -;user_ini.filename = ".user.ini" - -; To disable this feature set this option to empty value -;user_ini.filename = - -; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes) -;user_ini.cache_ttl = 300 - -;;;;;;;;;;;;;;;;;;;; -; Language Options ; -;;;;;;;;;;;;;;;;;;;; - -; Enable the PHP scripting language engine under Apache. -; http://php.net/engine -engine = On - -; This directive determines whether or not PHP will recognize code between -; tags as PHP source which should be processed as such. It is -; generally recommended that should be used and that this feature -; should be disabled, as enabling it may result in issues when generating XML -; documents, however this remains supported for backward compatibility reasons. -; Note that this directive does not control the would work. -; http://php.net/syntax-highlighting -;highlight.string = #DD0000 -;highlight.comment = #FF9900 -;highlight.keyword = #007700 -;highlight.default = #0000BB -;highlight.html = #000000 - -; If enabled, the request will be allowed to complete even if the user aborts -; the request. Consider enabling it if executing long requests, which may end up -; being interrupted by the user or a browser timing out. PHP's default behavior -; is to disable this feature. -; http://php.net/ignore-user-abort -;ignore_user_abort = On - -; Determines the size of the realpath cache to be used by PHP. This value should -; be increased on systems where PHP opens many files to reflect the quantity of -; the file operations performed. -; http://php.net/realpath-cache-size -;realpath_cache_size = 4096k - -; Duration of time, in seconds for which to cache realpath information for a given -; file or directory. For systems with rarely changing files, consider increasing this -; value. -; http://php.net/realpath-cache-ttl -;realpath_cache_ttl = 120 - -; Enables or disables the circular reference collector. -; http://php.net/zend.enable-gc -zend.enable_gc = On - -; If enabled, scripts may be written in encodings that are incompatible with -; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such -; encodings. To use this feature, mbstring extension must be enabled. -; Default: Off -;zend.multibyte = Off - -; Allows to set the default encoding for the scripts. This value will be used -; unless "declare(encoding=...)" directive appears at the top of the script. -; Only affects if zend.multibyte is set. -; Default: "" -;zend.script_encoding = - -;;;;;;;;;;;;;;;;; -; Miscellaneous ; -;;;;;;;;;;;;;;;;; - -; Decides whether PHP may expose the fact that it is installed on the server -; (e.g. by adding its signature to the Web server header). It is no security -; threat in any way, but it makes it possible to determine whether you use PHP -; on your server or not. -; http://php.net/expose-php -expose_php = Off - -;;;;;;;;;;;;;;;;;;; -; Resource Limits ; -;;;;;;;;;;;;;;;;;;; - -; Maximum execution time of each script, in seconds -; http://php.net/max-execution-time -; Note: This directive is hardcoded to 0 for the CLI SAPI -max_execution_time = 30 - -; Maximum amount of time each script may spend parsing request data. It's a good -; idea to limit this time on productions servers in order to eliminate unexpectedly -; long running scripts. -; Note: This directive is hardcoded to -1 for the CLI SAPI -; Default Value: -1 (Unlimited) -; Development Value: 60 (60 seconds) -; Production Value: 60 (60 seconds) -; http://php.net/max-input-time -max_input_time = 60 - -; Maximum input variable nesting level -; http://php.net/max-input-nesting-level -;max_input_nesting_level = 64 - -; How many GET/POST/COOKIE input variables may be accepted -; max_input_vars = 1000 - -; Maximum amount of memory a script may consume (128MB) -; http://php.net/memory-limit -memory_limit = 32M - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Error handling and logging ; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -; This directive informs PHP of which errors, warnings and notices you would like -; it to take action for. The recommended way of setting values for this -; directive is through the use of the error level constants and bitwise -; operators. The error level constants are below here for convenience as well as -; some common settings and their meanings. -; By default, PHP is set to take action on all errors, notices and warnings EXCEPT -; those related to E_NOTICE and E_STRICT, which together cover best practices and -; recommended coding standards in PHP. For performance reasons, this is the -; recommend error reporting setting. Your production server shouldn't be wasting -; resources complaining about best practices and coding standards. That's what -; development servers and development settings are for. -; Note: The php.ini-development file has this setting as E_ALL. This -; means it pretty much reports everything which is exactly what you want during -; development and early testing. -; -; Error Level Constants: -; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0) -; E_ERROR - fatal run-time errors -; E_RECOVERABLE_ERROR - almost fatal run-time errors -; E_WARNING - run-time warnings (non-fatal errors) -; E_PARSE - compile-time parse errors -; E_NOTICE - run-time notices (these are warnings which often result -; from a bug in your code, but it's possible that it was -; intentional (e.g., using an uninitialized variable and -; relying on the fact it is automatically initialized to an -; empty string) -; E_STRICT - run-time notices, enable to have PHP suggest changes -; to your code which will ensure the best interoperability -; and forward compatibility of your code -; E_CORE_ERROR - fatal errors that occur during PHP's initial startup -; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's -; initial startup -; E_COMPILE_ERROR - fatal compile-time errors -; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) -; E_USER_ERROR - user-generated error message -; E_USER_WARNING - user-generated warning message -; E_USER_NOTICE - user-generated notice message -; E_DEPRECATED - warn about code that will not work in future versions -; of PHP -; E_USER_DEPRECATED - user-generated deprecation warnings -; -; Common Values: -; E_ALL (Show all errors, warnings and notices including coding standards.) -; E_ALL & ~E_NOTICE (Show all errors, except for notices) -; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.) -; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) -; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED -; Development Value: E_ALL -; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT -; http://php.net/error-reporting -error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT - -; This directive controls whether or not and where PHP will output errors, -; notices and warnings too. Error output is very useful during development, but -; it could be very dangerous in production environments. Depending on the code -; which is triggering the error, sensitive information could potentially leak -; out of your application such as database usernames and passwords or worse. -; For production environments, we recommend logging errors rather than -; sending them to STDOUT. -; Possible Values: -; Off = Do not display any errors -; stderr = Display errors to STDERR (affects only CGI/CLI binaries!) -; On or stdout = Display errors to STDOUT -; Default Value: On -; Development Value: On -; Production Value: Off -; http://php.net/display-errors -display_errors = Off - -; The display of errors which occur during PHP's startup sequence are handled -; separately from display_errors. PHP's default behavior is to suppress those -; errors from clients. Turning the display of startup errors on can be useful in -; debugging configuration problems. We strongly recommend you -; set this to 'off' for production servers. -; Default Value: Off -; Development Value: On -; Production Value: Off -; http://php.net/display-startup-errors -display_startup_errors = Off - -; Besides displaying errors, PHP can also log errors to locations such as a -; server-specific log, STDERR, or a location specified by the error_log -; directive found below. While errors should not be displayed on productions -; servers they should still be monitored and logging is a great way to do that. -; Default Value: Off -; Development Value: On -; Production Value: On -; http://php.net/log-errors -log_errors = On - -; Set maximum length of log_errors. In error_log information about the source is -; added. The default is 1024 and 0 allows to not apply any maximum length at all. -; http://php.net/log-errors-max-len -log_errors_max_len = 1024 - -; Do not log repeated messages. Repeated errors must occur in same file on same -; line unless ignore_repeated_source is set true. -; http://php.net/ignore-repeated-errors -ignore_repeated_errors = Off - -; Ignore source of message when ignoring repeated messages. When this setting -; is On you will not log errors with repeated messages from different files or -; source lines. -; http://php.net/ignore-repeated-source -ignore_repeated_source = Off - -; If this parameter is set to Off, then memory leaks will not be shown (on -; stdout or in the log). This has only effect in a debug compile, and if -; error reporting includes E_WARNING in the allowed list -; http://php.net/report-memleaks -report_memleaks = On - -; This setting is on by default. -;report_zend_debug = 0 - -; Store the last error/warning message in $php_errormsg (boolean). Setting this value -; to On can assist in debugging and is appropriate for development servers. It should -; however be disabled on production servers. -; This directive is DEPRECATED. -; Default Value: Off -; Development Value: Off -; Production Value: Off -; http://php.net/track-errors -;track_errors = Off - -; Turn off normal error reporting and emit XML-RPC error XML -; http://php.net/xmlrpc-errors -;xmlrpc_errors = 0 - -; An XML-RPC faultCode -;xmlrpc_error_number = 0 - -; When PHP displays or logs an error, it has the capability of formatting the -; error message as HTML for easier reading. This directive controls whether -; the error message is formatted as HTML or not. -; Note: This directive is hardcoded to Off for the CLI SAPI -; Default Value: On -; Development Value: On -; Production value: On -; http://php.net/html-errors -html_errors = On - -; If html_errors is set to On *and* docref_root is not empty, then PHP -; produces clickable error messages that direct to a page describing the error -; or function causing the error in detail. -; You can download a copy of the PHP manual from http://php.net/docs -; and change docref_root to the base URL of your local copy including the -; leading '/'. You must also specify the file extension being used including -; the dot. PHP's default behavior is to leave these settings empty, in which -; case no links to documentation are generated. -; Note: Never use this feature for production boxes. -; http://php.net/docref-root -; Examples -;docref_root = "/phpmanual/" - -; http://php.net/docref-ext -;docref_ext = .html - -; String to output before an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-prepend-string -; Example: -;error_prepend_string = "" - -; String to output after an error message. PHP's default behavior is to leave -; this setting blank. -; http://php.net/error-append-string -; Example: -;error_append_string = "" - -; Log errors to specified file. PHP's default behavior is to leave this value -; empty. -; http://php.net/error-log -; Example: -;error_log = php_errors.log -; Log errors to syslog (Event Log on Windows). -;error_log = syslog - -;windows.show_crt_warning -; Default value: 0 -; Development value: 0 -; Production value: 0 - -;;;;;;;;;;;;;;;;; -; Data Handling ; -;;;;;;;;;;;;;;;;; - -; The separator used in PHP generated URLs to separate arguments. -; PHP's default setting is "&". -; http://php.net/arg-separator.output -; Example: -;arg_separator.output = "&" - -; List of separator(s) used by PHP to parse input URLs into variables. -; PHP's default setting is "&". -; NOTE: Every character in this directive is considered as separator! -; http://php.net/arg-separator.input -; Example: -;arg_separator.input = ";&" - -; This directive determines which super global arrays are registered when PHP -; starts up. G,P,C,E & S are abbreviations for the following respective super -; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty -; paid for the registration of these arrays and because ENV is not as commonly -; used as the others, ENV is not recommended on productions servers. You -; can still get access to the environment variables through getenv() should you -; need to. -; Default Value: "EGPCS" -; Development Value: "GPCS" -; Production Value: "GPCS"; -; http://php.net/variables-order -variables_order = "GPCS" - -; This directive determines which super global data (G,P & C) should be -; registered into the super global array REQUEST. If so, it also determines -; the order in which that data is registered. The values for this directive -; are specified in the same manner as the variables_order directive, -; EXCEPT one. Leaving this value empty will cause PHP to use the value set -; in the variables_order directive. It does not mean it will leave the super -; globals array REQUEST empty. -; Default Value: None -; Development Value: "GP" -; Production Value: "GP" -; http://php.net/request-order -request_order = "GP" - -; This directive determines whether PHP registers $argv & $argc each time it -; runs. $argv contains an array of all the arguments passed to PHP when a script -; is invoked. $argc contains an integer representing the number of arguments -; that were passed when the script was invoked. These arrays are extremely -; useful when running scripts from the command line. When this directive is -; enabled, registering these variables consumes CPU cycles and memory each time -; a script is executed. For performance reasons, this feature should be disabled -; on production servers. -; Note: This directive is hardcoded to On for the CLI SAPI -; Default Value: On -; Development Value: Off -; Production Value: Off -; http://php.net/register-argc-argv -register_argc_argv = Off - -; When enabled, the ENV, REQUEST and SERVER variables are created when they're -; first used (Just In Time) instead of when the script starts. If these -; variables are not used within a script, having this directive on will result -; in a performance gain. The PHP directive register_argc_argv must be disabled -; for this directive to have any affect. -; http://php.net/auto-globals-jit -auto_globals_jit = On - -; Whether PHP will read the POST data. -; This option is enabled by default. -; Most likely, you won't want to disable this option globally. It causes $_POST -; and $_FILES to always be empty; the only way you will be able to read the -; POST data will be through the php://input stream wrapper. This can be useful -; to proxy requests or to process the POST data in a memory efficient fashion. -; http://php.net/enable-post-data-reading -;enable_post_data_reading = Off - -; Maximum size of POST data that PHP will accept. -; Its value may be 0 to disable the limit. It is ignored if POST data reading -; is disabled through enable_post_data_reading. -; http://php.net/post-max-size -post_max_size = 100M - -; Automatically add files before PHP document. -; http://php.net/auto-prepend-file -auto_prepend_file = - -; Automatically add files after PHP document. -; http://php.net/auto-append-file -auto_append_file = - -; By default, PHP will output a media type using the Content-Type header. To -; disable this, simply set it to be empty. -; -; PHP's built-in default media type is set to text/html. -; http://php.net/default-mimetype -default_mimetype = "text/html" - -; PHP's default character set is set to UTF-8. -; http://php.net/default-charset -default_charset = "UTF-8" - -; PHP internal character encoding is set to empty. -; If empty, default_charset is used. -; http://php.net/internal-encoding -;internal_encoding = - -; PHP input character encoding is set to empty. -; If empty, default_charset is used. -; http://php.net/input-encoding -;input_encoding = - -; PHP output character encoding is set to empty. -; If empty, default_charset is used. -; See also output_buffer. -; http://php.net/output-encoding -;output_encoding = - -;;;;;;;;;;;;;;;;;;;;;;;;; -; Paths and Directories ; -;;;;;;;;;;;;;;;;;;;;;;;;; - -; UNIX: "/path1:/path2" -;include_path = ".:/usr/share/php" -; -; Windows: "\path1;\path2" -;include_path = ".;c:\php\includes" -; -; PHP's default setting for include_path is ".;/path/to/php/pear" -; http://php.net/include-path - -; The root of the PHP pages, used only if nonempty. -; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root -; if you are running php as a CGI under any web server (other than IIS) -; see documentation for security issues. The alternate is to use the -; cgi.force_redirect configuration below -; http://php.net/doc-root -doc_root = - -; The directory under which PHP opens the script using /~username used only -; if nonempty. -; http://php.net/user-dir -user_dir = - -; Directory in which the loadable extensions (modules) reside. -; http://php.net/extension-dir -; extension_dir = "./" -; On windows: -; extension_dir = "ext" - -; Directory where the temporary files should be placed. -; Defaults to the system default (see sys_get_temp_dir) -; sys_temp_dir = "/tmp" - -; Whether or not to enable the dl() function. The dl() function does NOT work -; properly in multithreaded servers, such as IIS or Zeus, and is automatically -; disabled on them. -; http://php.net/enable-dl -enable_dl = Off - -; cgi.force_redirect is necessary to provide security running PHP as a CGI under -; most web servers. Left undefined, PHP turns this on by default. You can -; turn it off here AT YOUR OWN RISK -; **You CAN safely turn this off for IIS, in fact, you MUST.** -; http://php.net/cgi.force-redirect -;cgi.force_redirect = 1 - -; if cgi.nph is enabled it will force cgi to always sent Status: 200 with -; every request. PHP's default behavior is to disable this feature. -;cgi.nph = 1 - -; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape -; (iPlanet) web servers, you MAY need to set an environment variable name that PHP -; will look for to know it is OK to continue execution. Setting this variable MAY -; cause security issues, KNOW WHAT YOU ARE DOING FIRST. -; http://php.net/cgi.redirect-status-env -;cgi.redirect_status_env = - -; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's -; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok -; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting -; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting -; of zero causes PHP to behave as before. Default is 1. You should fix your scripts -; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. -; http://php.net/cgi.fix-pathinfo -;cgi.fix_pathinfo=1 - -; if cgi.discard_path is enabled, the PHP CGI binary can safely be placed outside -; of the web tree and people will not be able to circumvent .htaccess security. -; http://php.net/cgi.dicard-path -;cgi.discard_path=1 - -; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate -; security tokens of the calling client. This allows IIS to define the -; security context that the request runs under. mod_fastcgi under Apache -; does not currently support this feature (03/17/2002) -; Set to 1 if running under IIS. Default is zero. -; http://php.net/fastcgi.impersonate -;fastcgi.impersonate = 1 - -; Disable logging through FastCGI connection. PHP's default behavior is to enable -; this feature. -;fastcgi.logging = 0 - -; cgi.rfc2616_headers configuration option tells PHP what type of headers to -; use when sending HTTP response code. If set to 0, PHP sends Status: header that -; is supported by Apache. When this option is set to 1, PHP will send -; RFC2616 compliant header. -; Default is zero. -; http://php.net/cgi.rfc2616-headers -;cgi.rfc2616_headers = 0 - -; cgi.check_shebang_line controls whether CGI PHP checks for line starting with #! -; (shebang) at the top of the running script. This line might be needed if the -; script support running both as stand-alone script and via PHP CGI<. PHP in CGI -; mode skips this line and ignores its content if this directive is turned on. -; http://php.net/cgi.check-shebang-line -;cgi.check_shebang_line=1 - -;;;;;;;;;;;;;;;; -; File Uploads ; -;;;;;;;;;;;;;;;; - -; Whether to allow HTTP file uploads. -; http://php.net/file-uploads -file_uploads = On - -; Temporary directory for HTTP uploaded files (will use system default if not -; specified). -; http://php.net/upload-tmp-dir -;upload_tmp_dir = - -; Maximum allowed size for uploaded files. -; http://php.net/upload-max-filesize -upload_max_filesize = 100M - -; Maximum number of files that can be uploaded via a single request -max_file_uploads = 10 - -;;;;;;;;;;;;;;;;;; -; Fopen wrappers ; -;;;;;;;;;;;;;;;;;; - -; Whether to allow the treatment of URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-fopen -allow_url_fopen = On - -; Whether to allow include/require to open URLs (like http:// or ftp://) as files. -; http://php.net/allow-url-include -allow_url_include = Off - -; Define the anonymous ftp password (your email address). PHP's default setting -; for this is empty. -; http://php.net/from -;from="john@doe.com" - -; Define the User-Agent string. PHP's default setting for this is empty. -; http://php.net/user-agent -;user_agent="PHP" - -; Default timeout for socket based streams (seconds) -; http://php.net/default-socket-timeout -default_socket_timeout = 60 - -; If your scripts have to deal with files from Macintosh systems, -; or you are running on a Mac and need to deal with files from -; unix or win32 systems, setting this flag will cause PHP to -; automatically detect the EOL character in those files so that -; fgets() and file() will work regardless of the source of the file. -; http://php.net/auto-detect-line-endings -;auto_detect_line_endings = Off - -;;;;;;;;;;;;;;;;;;;;;; -; Dynamic Extensions ; -;;;;;;;;;;;;;;;;;;;;;; - -; If you wish to have an extension loaded automatically, use the following -; syntax: -; -; extension=modulename -; -; For example: -; -; extension=mysqli -; -; When the extension library to load is not located in the default extension -; directory, You may specify an absolute path to the library file: -; -; extension=/path/to/extension/mysqli.so -; -; Note : The syntax used in previous PHP versions ('extension=.so' and -; 'extension='php_.dll') is supported for legacy reasons and may be -; deprecated in a future PHP major version. So, when it is possible, please -; move to the new ('extension=) syntax. -; -; Notes for Windows environments : -; -; - Many DLL files are located in the extensions/ (PHP 4) or ext/ (PHP 5+) -; extension folders as well as the separate PECL DLL download (PHP 5+). -; Be sure to appropriately set the extension_dir directive. -; -;extension=bz2 -;extension=curl -;extension=fileinfo -;extension=gd2 -;extension=gettext -;extension=gmp -;extension=intl -;extension=imap -;extension=interbase -;extension=ldap -;extension=mbstring -;extension=exif ; Must be after mbstring as it depends on it -;extension=mysqli -;extension=oci8_12c ; Use with Oracle Database 12c Instant Client -;extension=odbc -;extension=openssl -;extension=pdo_firebird -;extension=pdo_mysql -;extension=pdo_oci -;extension=pdo_odbc -;extension=pdo_pgsql -;extension=pdo_sqlite -;extension=pgsql -;extension=shmop - -; The MIBS data available in the PHP distribution must be installed. -; See http://www.php.net/manual/en/snmp.installation.php -;extension=snmp - -;extension=soap -;extension=sockets -;extension=sqlite3 -;extension=tidy -;extension=xmlrpc -;extension=xsl - -;;;;;;;;;;;;;;;;;;; -; Module Settings ; -;;;;;;;;;;;;;;;;;;; - -[CLI Server] -; Whether the CLI web server uses ANSI color coding in its terminal output. -cli_server.color = On - -[Date] -; Defines the default timezone used by the date functions -; http://php.net/date.timezone -;date.timezone = - -; http://php.net/date.default-latitude -;date.default_latitude = 31.7667 - -; http://php.net/date.default-longitude -;date.default_longitude = 35.2333 - -; http://php.net/date.sunrise-zenith -;date.sunrise_zenith = 90.583333 - -; http://php.net/date.sunset-zenith -;date.sunset_zenith = 90.583333 - -[filter] -; http://php.net/filter.default -;filter.default = unsafe_raw - -; http://php.net/filter.default-flags -;filter.default_flags = - -[iconv] -; Use of this INI entry is deprecated, use global input_encoding instead. -; If empty, default_charset or input_encoding or iconv.input_encoding is used. -; The precedence is: default_charset < intput_encoding < iconv.input_encoding -;iconv.input_encoding = - -; Use of this INI entry is deprecated, use global internal_encoding instead. -; If empty, default_charset or internal_encoding or iconv.internal_encoding is used. -; The precedence is: default_charset < internal_encoding < iconv.internal_encoding -;iconv.internal_encoding = - -; Use of this INI entry is deprecated, use global output_encoding instead. -; If empty, default_charset or output_encoding or iconv.output_encoding is used. -; The precedence is: default_charset < output_encoding < iconv.output_encoding -; To use an output encoding conversion, iconv's output handler must be set -; otherwise output encoding conversion cannot be performed. -;iconv.output_encoding = - -[intl] -;intl.default_locale = -; This directive allows you to produce PHP errors when some error -; happens within intl functions. The value is the level of the error produced. -; Default is 0, which does not produce any errors. -;intl.error_level = E_WARNING -;intl.use_exceptions = 0 - -[sqlite3] -;sqlite3.extension_dir = - -[Pcre] -;PCRE library backtracking limit. -; http://php.net/pcre.backtrack-limit -;pcre.backtrack_limit=100000 - -;PCRE library recursion limit. -;Please note that if you set this value to a high number you may consume all -;the available process stack and eventually crash PHP (due to reaching the -;stack size limit imposed by the Operating System). -; http://php.net/pcre.recursion-limit -;pcre.recursion_limit=100000 - -;Enables or disables JIT compilation of patterns. This requires the PCRE -;library to be compiled with JIT support. -;pcre.jit=1 - -[Pdo] -; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off" -; http://php.net/pdo-odbc.connection-pooling -;pdo_odbc.connection_pooling=strict - -;pdo_odbc.db2_instance_name - -[Pdo_mysql] -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/pdo_mysql.cache_size -pdo_mysql.cache_size = 2000 - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/pdo_mysql.default-socket -pdo_mysql.default_socket= - -[Phar] -; http://php.net/phar.readonly -;phar.readonly = On - -; http://php.net/phar.require-hash -;phar.require_hash = On - -;phar.cache_list = - -[mail function] -; For Win32 only. -; http://php.net/smtp -SMTP = localhost -; http://php.net/smtp-port -smtp_port = 25 - -; For Win32 only. -; http://php.net/sendmail-from -;sendmail_from = me@example.com - -; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). -; http://php.net/sendmail-path -;sendmail_path = - -; Force the addition of the specified parameters to be passed as extra parameters -; to the sendmail binary. These parameters will always replace the value of -; the 5th parameter to mail(). -;mail.force_extra_parameters = - -; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename -mail.add_x_header = Off - -; The path to a log file that will log all mail() calls. Log entries include -; the full path of the script, line number, To address and headers. -;mail.log = -; Log mail to syslog (Event Log on Windows). -;mail.log = syslog - -[ODBC] -; http://php.net/odbc.default-db -;odbc.default_db = Not yet implemented - -; http://php.net/odbc.default-user -;odbc.default_user = Not yet implemented - -; http://php.net/odbc.default-pw -;odbc.default_pw = Not yet implemented - -; Controls the ODBC cursor model. -; Default: SQL_CURSOR_STATIC (default). -;odbc.default_cursortype - -; Allow or prevent persistent links. -; http://php.net/odbc.allow-persistent -odbc.allow_persistent = On - -; Check that a connection is still valid before reuse. -; http://php.net/odbc.check-persistent -odbc.check_persistent = On - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/odbc.max-persistent -odbc.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -; http://php.net/odbc.max-links -odbc.max_links = -1 - -; Handling of LONG fields. Returns number of bytes to variables. 0 means -; passthru. -; http://php.net/odbc.defaultlrl -odbc.defaultlrl = 4096 - -; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. -; See the documentation on odbc_binmode and odbc_longreadlen for an explanation -; of odbc.defaultlrl and odbc.defaultbinmode -; http://php.net/odbc.defaultbinmode -odbc.defaultbinmode = 1 - -;birdstep.max_links = -1 - -[Interbase] -; Allow or prevent persistent links. -ibase.allow_persistent = 1 - -; Maximum number of persistent links. -1 means no limit. -ibase.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -ibase.max_links = -1 - -; Default database name for ibase_connect(). -;ibase.default_db = - -; Default username for ibase_connect(). -;ibase.default_user = - -; Default password for ibase_connect(). -;ibase.default_password = - -; Default charset for ibase_connect(). -;ibase.default_charset = - -; Default timestamp format. -ibase.timestampformat = "%Y-%m-%d %H:%M:%S" - -; Default date format. -ibase.dateformat = "%Y-%m-%d" - -; Default time format. -ibase.timeformat = "%H:%M:%S" - -[MySQLi] - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/mysqli.max-persistent -mysqli.max_persistent = -1 - -; Allow accessing, from PHP's perspective, local files with LOAD DATA statements -; http://php.net/mysqli.allow_local_infile -;mysqli.allow_local_infile = On - -; Allow or prevent persistent links. -; http://php.net/mysqli.allow-persistent -mysqli.allow_persistent = On - -; Maximum number of links. -1 means no limit. -; http://php.net/mysqli.max-links -mysqli.max_links = -1 - -; If mysqlnd is used: Number of cache slots for the internal result set cache -; http://php.net/mysqli.cache_size -mysqli.cache_size = 2000 - -; Default port number for mysqli_connect(). If unset, mysqli_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -; http://php.net/mysqli.default-port -mysqli.default_port = 3306 - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -; http://php.net/mysqli.default-socket -mysqli.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-host -mysqli.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -; http://php.net/mysqli.default-user -mysqli.default_user = - -; Default password for mysqli_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -; http://php.net/mysqli.default-pw -mysqli.default_pw = - -; Allow or prevent reconnect -mysqli.reconnect = Off - -[mysqlnd] -; Enable / Disable collection of general statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -; http://php.net/mysqlnd.collect_statistics -mysqlnd.collect_statistics = On - -; Enable / Disable collection of memory usage statistics by mysqlnd which can be -; used to tune and monitor MySQL operations. -; http://php.net/mysqlnd.collect_memory_statistics -mysqlnd.collect_memory_statistics = Off - -; Records communication from all extensions using mysqlnd to the specified log -; file. -; http://php.net/mysqlnd.debug -;mysqlnd.debug = - -; Defines which queries will be logged. -; http://php.net/mysqlnd.log_mask -;mysqlnd.log_mask = 0 - -; Default size of the mysqlnd memory pool, which is used by result sets. -; http://php.net/mysqlnd.mempool_default_size -;mysqlnd.mempool_default_size = 16000 - -; Size of a pre-allocated buffer used when sending commands to MySQL in bytes. -; http://php.net/mysqlnd.net_cmd_buffer_size -;mysqlnd.net_cmd_buffer_size = 2048 - -; Size of a pre-allocated buffer used for reading data sent by the server in -; bytes. -; http://php.net/mysqlnd.net_read_buffer_size -;mysqlnd.net_read_buffer_size = 32768 - -; Timeout for network requests in seconds. -; http://php.net/mysqlnd.net_read_timeout -;mysqlnd.net_read_timeout = 31536000 - -; SHA-256 Authentication Plugin related. File with the MySQL server public RSA -; key. -; http://php.net/mysqlnd.sha256_server_public_key -;mysqlnd.sha256_server_public_key = - -[OCI8] - -; Connection: Enables privileged connections using external -; credentials (OCI_SYSOPER, OCI_SYSDBA) -; http://php.net/oci8.privileged-connect -;oci8.privileged_connect = Off - -; Connection: The maximum number of persistent OCI8 connections per -; process. Using -1 means no limit. -; http://php.net/oci8.max-persistent -;oci8.max_persistent = -1 - -; Connection: The maximum number of seconds a process is allowed to -; maintain an idle persistent connection. Using -1 means idle -; persistent connections will be maintained forever. -; http://php.net/oci8.persistent-timeout -;oci8.persistent_timeout = -1 - -; Connection: The number of seconds that must pass before issuing a -; ping during oci_pconnect() to check the connection validity. When -; set to 0, each oci_pconnect() will cause a ping. Using -1 disables -; pings completely. -; http://php.net/oci8.ping-interval -;oci8.ping_interval = 60 - -; Connection: Set this to a user chosen connection class to be used -; for all pooled server requests with Oracle 11g Database Resident -; Connection Pooling (DRCP). To use DRCP, this value should be set to -; the same string for all web servers running the same application, -; the database pool must be configured, and the connection string must -; specify to use a pooled server. -;oci8.connection_class = - -; High Availability: Using On lets PHP receive Fast Application -; Notification (FAN) events generated when a database node fails. The -; database must also be configured to post FAN events. -;oci8.events = Off - -; Tuning: This option enables statement caching, and specifies how -; many statements to cache. Using 0 disables statement caching. -; http://php.net/oci8.statement-cache-size -;oci8.statement_cache_size = 20 - -; Tuning: Enables statement prefetching and sets the default number of -; rows that will be fetched automatically after statement execution. -; http://php.net/oci8.default-prefetch -;oci8.default_prefetch = 100 - -; Compatibility. Using On means oci_close() will not close -; oci_connect() and oci_new_connect() connections. -; http://php.net/oci8.old-oci-close-semantics -;oci8.old_oci_close_semantics = Off - -[PostgreSQL] -; Allow or prevent persistent links. -; http://php.net/pgsql.allow-persistent -pgsql.allow_persistent = On - -; Detect broken persistent links always with pg_pconnect(). -; Auto reset feature requires a little overheads. -; http://php.net/pgsql.auto-reset-persistent -pgsql.auto_reset_persistent = Off - -; Maximum number of persistent links. -1 means no limit. -; http://php.net/pgsql.max-persistent -pgsql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -; http://php.net/pgsql.max-links -pgsql.max_links = -1 - -; Ignore PostgreSQL backends Notice message or not. -; Notice message logging require a little overheads. -; http://php.net/pgsql.ignore-notice -pgsql.ignore_notice = 0 - -; Log PostgreSQL backends Notice message or not. -; Unless pgsql.ignore_notice=0, module cannot log notice message. -; http://php.net/pgsql.log-notice -pgsql.log_notice = 0 - -[bcmath] -; Number of decimal digits for all bcmath functions. -; http://php.net/bcmath.scale -bcmath.scale = 0 - -[browscap] -; http://php.net/browscap -;browscap = extra/browscap.ini - -[Session] -; Handler used to store/retrieve data. -; http://php.net/session.save-handler -session.save_handler = redis - -; Argument passed to save_handler. In the case of files, this is the path -; where data files are stored. Note: Windows users have to change this -; variable in order to use PHP's session functions. -; -; The path can be defined as: -; -session.save_path = "tcp://192.168.0.22:6379" -; -; where N is an integer. Instead of storing all the session files in -; /path, what this will do is use subdirectories N-levels deep, and -; store the session data in those directories. This is useful if -; your OS has problems with many files in one directory, and is -; a more efficient layout for servers that handle many sessions. -; -; NOTE 1: PHP will not create this directory structure automatically. -; You can use the script in the ext/session dir for that purpose. -; NOTE 2: See the section on garbage collection below if you choose to -; use subdirectories for session storage -; -; The file storage module creates files using mode 600 by default. -; You can change that by using -; -; session.save_path = "N;MODE;/path" -; -; where MODE is the octal representation of the mode. Note that this -; does not overwrite the process's umask. -; http://php.net/session.save-path -session.save_path = "tcp://192.168.0.22:6379??auth=6Dj3RYqIkjC41Si+RF/CWttYz3s/eAvE2JX6FPznUNDmcmbPJXYeTVt/RINxC+ifi39XLifsAWMhhFgd" - -; Whether to use strict session mode. -; Strict session mode does not accept uninitialized session ID and regenerate -; session ID if browser sends uninitialized session ID. Strict mode protects -; applications from session fixation via session adoption vulnerability. It is -; disabled by default for maximum compatibility, but enabling it is encouraged. -; https://wiki.php.net/rfc/strict_sessions -session.use_strict_mode = 0 - -; Whether to use cookies. -; http://php.net/session.use-cookies -session.use_cookies = 1 - -; http://php.net/session.cookie-secure -;session.cookie_secure = - -; This option forces PHP to fetch and use a cookie for storing and maintaining -; the session id. We encourage this operation as it's very helpful in combating -; session hijacking when not specifying and managing your own session id. It is -; not the be-all and end-all of session hijacking defense, but it's a good start. -; http://php.net/session.use-only-cookies -session.use_only_cookies = 1 - -; Name of the session (used as cookie name). -; http://php.net/session.name -session.name = PHPSESSID - -; Initialize session on request startup. -; http://php.net/session.auto-start -session.auto_start = 0 - -; Lifetime in seconds of cookie or, if 0, until browser is restarted. -; http://php.net/session.cookie-lifetime -session.cookie_lifetime = 0 - -; The path for which the cookie is valid. -; http://php.net/session.cookie-path -session.cookie_path = / - -; The domain for which the cookie is valid. -; http://php.net/session.cookie-domain -session.cookie_domain = - -; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript. -; http://php.net/session.cookie-httponly -session.cookie_httponly = - -; Handler used to serialize data. php is the standard serializer of PHP. -; http://php.net/session.serialize-handler -session.serialize_handler = php - -; Defines the probability that the 'garbage collection' process is started -; on every session initialization. The probability is calculated by using -; gc_probability/gc_divisor. Where session.gc_probability is the numerator -; and gc_divisor is the denominator in the equation. Setting this value to 1 -; when the session.gc_divisor value is 100 will give you approximately a 1% chance -; the gc will run on any give request. -; Default Value: 1 -; Development Value: 1 -; Production Value: 1 -; http://php.net/session.gc-probability -session.gc_probability = 0 - -; Defines the probability that the 'garbage collection' process is started on every -; session initialization. The probability is calculated by using the following equation: -; gc_probability/gc_divisor. Where session.gc_probability is the numerator and -; session.gc_divisor is the denominator in the equation. Setting this value to 1 -; when the session.gc_divisor value is 100 will give you approximately a 1% chance -; the gc will run on any give request. Increasing this value to 1000 will give you -; a 0.1% chance the gc will run on any give request. For high volume production servers, -; this is a more efficient approach. -; Default Value: 100 -; Development Value: 1000 -; Production Value: 1000 -; http://php.net/session.gc-divisor -session.gc_divisor = 1000 - -; After this number of seconds, stored data will be seen as 'garbage' and -; cleaned up by the garbage collection process. -; http://php.net/session.gc-maxlifetime -session.gc_maxlifetime = 1440 - -; NOTE: If you are using the subdirectory option for storing session files -; (see session.save_path above), then garbage collection does *not* -; happen automatically. You will need to do your own garbage -; collection through a shell script, cron entry, or some other method. -; For example, the following script would is the equivalent of -; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): -; find /path/to/sessions -cmin +24 -type f | xargs rm - -; Check HTTP Referer to invalidate externally stored URLs containing ids. -; HTTP_REFERER has to contain this substring for the session to be -; considered as valid. -; http://php.net/session.referer-check -session.referer_check = - -; Set to {nocache,private,public,} to determine HTTP caching aspects -; or leave this empty to avoid sending anti-caching headers. -; http://php.net/session.cache-limiter -session.cache_limiter = nocache - -; Document expires after n minutes. -; http://php.net/session.cache-expire -session.cache_expire = 180 - -; trans sid support is disabled by default. -; Use of trans sid may risk your users' security. -; Use this option with caution. -; - User may send URL contains active session ID -; to other person via. email/irc/etc. -; - URL that contains active session ID may be stored -; in publicly accessible computer. -; - User may access your site with the same session ID -; always using URL stored in browser's history or bookmarks. -; http://php.net/session.use-trans-sid -session.use_trans_sid = 0 - -; Set session ID character length. This value could be between 22 to 256. -; Shorter length than default is supported only for compatibility reason. -; Users should use 32 or more chars. -; http://php.net/session.sid-length -; Default Value: 32 -; Development Value: 26 -; Production Value: 26 -session.sid_length = 26 - -; The URL rewriter will look for URLs in a defined set of HTML tags. -;
is special; if you include them here, the rewriter will -; add a hidden field with the info which is otherwise appended -; to URLs. tag's action attribute URL will not be modified -; unless it is specified. -; Note that all valid entries require a "=", even if no value follows. -; Default Value: "a=href,area=href,frame=src,form=" -; Development Value: "a=href,area=href,frame=src,form=" -; Production Value: "a=href,area=href,frame=src,form=" -; http://php.net/url-rewriter.tags -session.trans_sid_tags = "a=href,area=href,frame=src,form=" - -; URL rewriter does not rewrite absolute URLs by default. -; To enable rewrites for absolute pathes, target hosts must be specified -; at RUNTIME. i.e. use ini_set() -; tags is special. PHP will check action attribute's URL regardless -; of session.trans_sid_tags setting. -; If no host is defined, HTTP_HOST will be used for allowed host. -; Example value: php.net,www.php.net,wiki.php.net -; Use "," for multiple hosts. No spaces are allowed. -; Default Value: "" -; Development Value: "" -; Production Value: "" -;session.trans_sid_hosts="" - -; Define how many bits are stored in each character when converting -; the binary hash data to something readable. -; Possible values: -; 4 (4 bits: 0-9, a-f) -; 5 (5 bits: 0-9, a-v) -; 6 (6 bits: 0-9, a-z, A-Z, "-", ",") -; Default Value: 4 -; Development Value: 5 -; Production Value: 5 -; http://php.net/session.hash-bits-per-character -session.sid_bits_per_character = 5 - -; Enable upload progress tracking in $_SESSION -; Default Value: On -; Development Value: On -; Production Value: On -; http://php.net/session.upload-progress.enabled -;session.upload_progress.enabled = On - -; Cleanup the progress information as soon as all POST data has been read -; (i.e. upload completed). -; Default Value: On -; Development Value: On -; Production Value: On -; http://php.net/session.upload-progress.cleanup -;session.upload_progress.cleanup = On - -; A prefix used for the upload progress key in $_SESSION -; Default Value: "upload_progress_" -; Development Value: "upload_progress_" -; Production Value: "upload_progress_" -; http://php.net/session.upload-progress.prefix -;session.upload_progress.prefix = "upload_progress_" - -; The index name (concatenated with the prefix) in $_SESSION -; containing the upload progress information -; Default Value: "PHP_SESSION_UPLOAD_PROGRESS" -; Development Value: "PHP_SESSION_UPLOAD_PROGRESS" -; Production Value: "PHP_SESSION_UPLOAD_PROGRESS" -; http://php.net/session.upload-progress.name -;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS" - -; How frequently the upload progress should be updated. -; Given either in percentages (per-file), or in bytes -; Default Value: "1%" -; Development Value: "1%" -; Production Value: "1%" -; http://php.net/session.upload-progress.freq -;session.upload_progress.freq = "1%" - -; The minimum delay between updates, in seconds -; Default Value: 1 -; Development Value: 1 -; Production Value: 1 -; http://php.net/session.upload-progress.min-freq -;session.upload_progress.min_freq = "1" - -; Only write session data when session data is changed. Enabled by default. -; http://php.net/session.lazy-write -;session.lazy_write = On - -[Assertion] -; Switch whether to compile assertions at all (to have no overhead at run-time) -; -1: Do not compile at all -; 0: Jump over assertion at run-time -; 1: Execute assertions -; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1) -; Default Value: 1 -; Development Value: 1 -; Production Value: -1 -; http://php.net/zend.assertions -zend.assertions = -1 - -; Assert(expr); active by default. -; http://php.net/assert.active -;assert.active = On - -; Throw an AssertationException on failed assertions -; http://php.net/assert.exception -;assert.exception = On - -; Issue a PHP warning for each failed assertion. (Overridden by assert.exception if active) -; http://php.net/assert.warning -;assert.warning = On - -; Don't bail out by default. -; http://php.net/assert.bail -;assert.bail = Off - -; User-function to be called if an assertion fails. -; http://php.net/assert.callback -;assert.callback = 0 - -; Eval the expression with current error_reporting(). Set to true if you want -; error_reporting(0) around the eval(). -; http://php.net/assert.quiet-eval -;assert.quiet_eval = 0 - -[COM] -; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs -; http://php.net/com.typelib-file -;com.typelib_file = - -; allow Distributed-COM calls -; http://php.net/com.allow-dcom -;com.allow_dcom = true - -; autoregister constants of a components typlib on com_load() -; http://php.net/com.autoregister-typelib -;com.autoregister_typelib = true - -; register constants casesensitive -; http://php.net/com.autoregister-casesensitive -;com.autoregister_casesensitive = false - -; show warnings on duplicate constant registrations -; http://php.net/com.autoregister-verbose -;com.autoregister_verbose = true - -; The default character set code-page to use when passing strings to and from COM objects. -; Default: system ANSI code page -;com.code_page= - -[mbstring] -; language for internal character representation. -; This affects mb_send_mail() and mbstring.detect_order. -; http://php.net/mbstring.language -;mbstring.language = Japanese - -; Use of this INI entry is deprecated, use global internal_encoding instead. -; internal/script encoding. -; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*) -; If empty, default_charset or internal_encoding or iconv.internal_encoding is used. -; The precedence is: default_charset < internal_encoding < iconv.internal_encoding -;mbstring.internal_encoding = - -; Use of this INI entry is deprecated, use global input_encoding instead. -; http input encoding. -; mbstring.encoding_traslation = On is needed to use this setting. -; If empty, default_charset or input_encoding or mbstring.input is used. -; The precedence is: default_charset < intput_encoding < mbsting.http_input -; http://php.net/mbstring.http-input -;mbstring.http_input = - -; Use of this INI entry is deprecated, use global output_encoding instead. -; http output encoding. -; mb_output_handler must be registered as output buffer to function. -; If empty, default_charset or output_encoding or mbstring.http_output is used. -; The precedence is: default_charset < output_encoding < mbstring.http_output -; To use an output encoding conversion, mbstring's output handler must be set -; otherwise output encoding conversion cannot be performed. -; http://php.net/mbstring.http-output -;mbstring.http_output = - -; enable automatic encoding translation according to -; mbstring.internal_encoding setting. Input chars are -; converted to internal encoding by setting this to On. -; Note: Do _not_ use automatic encoding translation for -; portable libs/applications. -; http://php.net/mbstring.encoding-translation -;mbstring.encoding_translation = Off - -; automatic encoding detection order. -; "auto" detect order is changed according to mbstring.language -; http://php.net/mbstring.detect-order -;mbstring.detect_order = auto - -; substitute_character used when character cannot be converted -; one from another -; http://php.net/mbstring.substitute-character -;mbstring.substitute_character = none - -; overload(replace) single byte functions by mbstring functions. -; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), -; etc. Possible values are 0,1,2,4 or combination of them. -; For example, 7 for overload everything. -; 0: No overload -; 1: Overload mail() function -; 2: Overload str*() functions -; 4: Overload ereg*() functions -; http://php.net/mbstring.func-overload -;mbstring.func_overload = 0 - -; enable strict encoding detection. -; Default: Off -;mbstring.strict_detection = On - -; This directive specifies the regex pattern of content types for which mb_output_handler() -; is activated. -; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml) -;mbstring.http_output_conv_mimetype= - -[gd] -; Tell the jpeg decode to ignore warnings and try to create -; a gd image. The warning will then be displayed as notices -; disabled by default -; http://php.net/gd.jpeg-ignore-warning -;gd.jpeg_ignore_warning = 1 - -[exif] -; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. -; With mbstring support this will automatically be converted into the encoding -; given by corresponding encode setting. When empty mbstring.internal_encoding -; is used. For the decode settings you can distinguish between motorola and -; intel byte order. A decode setting cannot be empty. -; http://php.net/exif.encode-unicode -;exif.encode_unicode = ISO-8859-15 - -; http://php.net/exif.decode-unicode-motorola -;exif.decode_unicode_motorola = UCS-2BE - -; http://php.net/exif.decode-unicode-intel -;exif.decode_unicode_intel = UCS-2LE - -; http://php.net/exif.encode-jis -;exif.encode_jis = - -; http://php.net/exif.decode-jis-motorola -;exif.decode_jis_motorola = JIS - -; http://php.net/exif.decode-jis-intel -;exif.decode_jis_intel = JIS - -[Tidy] -; The path to a default tidy configuration file to use when using tidy -; http://php.net/tidy.default-config -;tidy.default_config = /usr/local/lib/php/default.tcfg - -; Should tidy clean and repair output automatically? -; WARNING: Do not use this option if you are generating non-html content -; such as dynamic images -; http://php.net/tidy.clean-output -tidy.clean_output = Off - -[soap] -; Enables or disables WSDL caching feature. -; http://php.net/soap.wsdl-cache-enabled -soap.wsdl_cache_enabled=1 - -; Sets the directory name where SOAP extension will put cache files. -; http://php.net/soap.wsdl-cache-dir -soap.wsdl_cache_dir="/tmp" - -; (time to live) Sets the number of second while cached file will be used -; instead of original one. -; http://php.net/soap.wsdl-cache-ttl -soap.wsdl_cache_ttl=86400 - -; Sets the size of the cache limit. (Max. number of WSDL files to cache) -soap.wsdl_cache_limit = 5 - -[sysvshm] -; A default size of the shared memory segment -;sysvshm.init_mem = 10000 - -[ldap] -; Sets the maximum number of open links or -1 for unlimited. -ldap.max_links = -1 - -[dba] -;dba.default_handler= - -[opcache] -; Determines if Zend OPCache is enabled -opcache.enable=1 - -; Determines if Zend OPCache is enabled for the CLI version of PHP -;opcache.enable_cli=0 - -; The OPcache shared memory storage size. -opcache.memory_consumption=128 - -; The amount of memory for interned strings in Mbytes. -opcache.interned_strings_buffer=8 - -; The maximum number of keys (scripts) in the OPcache hash table. -; Only numbers between 200 and 1000000 are allowed. -opcache.max_accelerated_files=10000 - -; The maximum percentage of "wasted" memory until a restart is scheduled. -;opcache.max_wasted_percentage=5 - -; When this directive is enabled, the OPcache appends the current working -; directory to the script key, thus eliminating possible collisions between -; files with the same name (basename). Disabling the directive improves -; performance, but may break existing applications. -;opcache.use_cwd=1 - -; When disabled, you must reset the OPcache manually or restart the -; webserver for changes to the filesystem to take effect. -;opcache.validate_timestamps=1 - -; How often (in seconds) to check file timestamps for changes to the shared -; memory storage allocation. ("1" means validate once per second, but only -; once per request. "0" means always validate) -opcache.revalidate_freq=240 - -; Enables or disables file search in include_path optimization -;opcache.revalidate_path=0 - -; If disabled, all PHPDoc comments are dropped from the code to reduce the -; size of the optimized code. -;opcache.save_comments=1 - -; Allow file existence override (file_exists, etc.) performance feature. -;opcache.enable_file_override=0 - -; A bitmask, where each bit enables or disables the appropriate OPcache -; passes -;opcache.optimization_level=0xffffffff - -;opcache.inherited_hack=1 -;opcache.dups_fix=0 - -; The location of the OPcache blacklist file (wildcards allowed). -; Each OPcache blacklist file is a text file that holds the names of files -; that should not be accelerated. The file format is to add each filename -; to a new line. The filename may be a full path or just a file prefix -; (i.e., /var/www/x blacklists all the files and directories in /var/www -; that start with 'x'). Line starting with a ; are ignored (comments). -;opcache.blacklist_filename= - -; Allows exclusion of large files from being cached. By default all files -; are cached. -;opcache.max_file_size=0 - -; Check the cache checksum each N requests. -; The default value of "0" means that the checks are disabled. -;opcache.consistency_checks=0 - -; How long to wait (in seconds) for a scheduled restart to begin if the cache -; is not being accessed. -;opcache.force_restart_timeout=180 - -; OPcache error_log file name. Empty string assumes "stderr". -;opcache.error_log= - -; All OPcache errors go to the Web server log. -; By default, only fatal errors (level 0) or errors (level 1) are logged. -; You can also enable warnings (level 2), info messages (level 3) or -; debug messages (level 4). -;opcache.log_verbosity_level=1 - -; Preferred Shared Memory back-end. Leave empty and let the system decide. -;opcache.preferred_memory_model= - -; Protect the shared memory from unexpected writing during script execution. -; Useful for internal debugging only. -;opcache.protect_memory=0 - -; Allows calling OPcache API functions only from PHP scripts which path is -; started from specified string. The default "" means no restriction -;opcache.restrict_api= - -; Mapping base of shared memory segments (for Windows only). All the PHP -; processes have to map shared memory into the same address space. This -; directive allows to manually fix the "Unable to reattach to base address" -; errors. -;opcache.mmap_base= - -; Enables and sets the second level cache directory. -; It should improve performance when SHM memory is full, at server restart or -; SHM reset. The default "" disables file based caching. -;opcache.file_cache= - -; Enables or disables opcode caching in shared memory. -;opcache.file_cache_only=0 - -; Enables or disables checksum validation when script loaded from file cache. -;opcache.file_cache_consistency_checks=1 - -; Implies opcache.file_cache_only=1 for a certain process that failed to -; reattach to the shared memory (for Windows only). Explicitly enabled file -; cache is required. -;opcache.file_cache_fallback=1 - -; Enables or disables copying of PHP code (text segment) into HUGE PAGES. -; This should improve performance, but requires appropriate OS configuration. -;opcache.huge_code_pages=1 - -; Validate cached file permissions. -;opcache.validate_permission=0 - -; Prevent name collisions in chroot'ed environment. -;opcache.validate_root=0 - -; If specified, it produces opcode dumps for debugging different stages of -; optimizations. -;opcache.opt_debug_level=0 - -opcache.fast_shutdown=1 - -[curl] -; A default value for the CURLOPT_CAINFO option. This is required to be an -; absolute path. -;curl.cainfo = - -[openssl] -; The location of a Certificate Authority (CA) file on the local filesystem -; to use when verifying the identity of SSL/TLS peers. Most users should -; not specify a value for this directive as PHP will attempt to use the -; OS-managed cert stores in its absence. If specified, this value may still -; be overridden on a per-stream basis via the "cafile" SSL stream context -; option. -;openssl.cafile= - -; If openssl.cafile is not specified or if the CA file is not found, the -; directory pointed to by openssl.capath is searched for a suitable -; certificate. This value must be a correctly hashed certificate directory. -; Most users should not specify a value for this directive as PHP will -; attempt to use the OS-managed cert stores in its absence. If specified, -; this value may still be overridden on a per-stream basis via the "capath" -; SSL stream context option. -;openssl.capath= - -; Local Variables: -; tab-width: 4 -; End: diff --git a/files/php7/www.conf b/files/php7/www.conf deleted file mode 100644 index ad7c6ad..0000000 --- a/files/php7/www.conf +++ /dev/null @@ -1,22 +0,0 @@ -[www] - -; linux socket -; listen = /var/run/php7.2-fpm.sock -; TCP socket -listen = 127.0.0.1:9000 - -user = www-data -group = www-data -listen.owner = www-data -listen.group = www-data - -; request_slowlog_timeout = 5s -; slowlog = /var/log/php-fpm/slowlog-site.log - -; child processes -pm = dynamic -pm.max_children = 400 -pm.start_servers = 10 -pm.min_spare_servers = 5 -pm.max_spare_servers = 10 -pm.max_requests = 500 diff --git a/manifests/deploy.pp b/manifests/deploy.pp deleted file mode 100644 index c7411dd..0000000 --- a/manifests/deploy.pp +++ /dev/null @@ -1,53 +0,0 @@ -# Copyright 2013 OpenStack Foundation -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -# -# == Define: deploy -# -# deployment tool for laravel framework/php site management -# -define openstackid::deploy ( -) { - $deploy_dirs = [ '/opt/deploy', '/opt/deploy/conf.d' ] - - file { $deploy_dirs: - ensure => directory, - owner => 'root', - group => 'root', - mode => '0755', - } - - file { '/opt/deploy/deploy.sh': - source => 'puppet:///modules/openstackid/deploy.sh', - owner => 'root', - group => 'root', - mode => '0755', - require => File[$deploy_dirs], - } - - file { '/opt/deploy/functions': - source => 'puppet:///modules/openstackid/functions', - owner => 'root', - group => 'root', - mode => '0644', - require => File[$deploy_dirs], - } - - file { '/opt/deploy/deployrc': - source => 'puppet:///modules/openstackid/deployrc', - owner => 'root', - group => 'root', - mode => '0644', - require => File[$deploy_dirs], - } -} diff --git a/manifests/init.pp b/manifests/init.pp deleted file mode 100644 index 421d12a..0000000 --- a/manifests/init.pp +++ /dev/null @@ -1,672 +0,0 @@ -# Copyright 2013 OpenStack Foundation -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. -# -# openstackid idp(sso-openid) -# -# == Class: openstackid -# -class openstackid ( - $git_source_repo = 'https://git.openstack.org/openstack-infra/openstackid', - $site_admin_password = '', - $id_mysql_host = '', - $id_mysql_user = '', - $id_mysql_password = '', - $id_db_name = '', - $redis_port = '', - $redis_host = '', - $redis_db = 0, - $redis_password = '', - $vhost_name = $::fqdn, - $robots_txt_source = '', - $serveradmin = "webmaster@${::fqdn}", - $canonicalweburl = "https://${::fqdn}/", - $ssl_cert_file = '/etc/ssl/certs/ssl-cert-snakeoil.pem', - $ssl_key_file = '/etc/ssl/private/ssl-cert-snakeoil.key', - $ssl_chain_file = '', - $ssl_cert_file_contents = '', # If left empty puppet will not create file. - $ssl_key_file_contents = '', # If left empty puppet will not create file. - $ssl_chain_file_contents = '', # If left empty puppet will not create file. - $httpd_acceptorthreads = '', - $id_log_error_to_email = '', - $id_log_error_from_email = '', - $id_environment = 'dev', - $id_hostname = $::hostname, - $id_recaptcha_public_key = '', - $id_recaptcha_private_key = '', - $id_recaptcha_template = '', - $openstackid_release = 'latest', - $ssl_enable = true, - $oauth2_enable = true, - $app_url = '', - $app_key = '', - $app_version = '', - $app_timezone = 'UTC', - $email_driver = 'mail', - $email_send_grid_api_key = '', - $email_smtp_server = 'smtp.mailgun.org', - $email_smtp_server_port = 587, - $email_smtp_server_user = '', - $email_smtp_server_password = '', - $use_db_seeding = false, - $projectroot = '/srv/openstackid/w', - $docroot = '/srv/openstackid/w/public', - $laravel_version = 4, - $app_log_level = 'error', - $app_log_email_level = 'error', - $db_log_enabled = false, - $banning_enabled = true, - $app_debug = false, - $app_locale = 'en', - $curl_verify_ssl_cert = true, - $curl_allow_redirect = false, - $curl_timeout = 60, - $assets_base_url = 'https://www.openstack.org/', - $cache_driver = 'redis', - $session_driver = 'redis', - # on minutes - $session_lifetime = 1440, - $session_encrypt = true, - $session_expire_on_close = false, - $session_cookie_name = 'openstackid_s', - $session_cookie_path = '/', - $session_cookie_domain = $::fqdn, - $session_cookie_secure = true, - $session_cookie_http_only = true, - $mysql_ssl_enabled = false, - $mysql_ssl_ca_file = '/etc/mysql-client-ssl/ca-cert.pem', - $mysql_ssl_ca_file_contents = '', - $mysql_ssl_client_key_file = '/etc/mysql-client-ssl/client-key.pem', - $mysql_ssl_client_key_file_contents = '', - $mysql_ssl_client_cert_file = '/etc/mysql-client-ssl/client-cert.pem', - $mysql_ssl_client_cert_file_contents = '', - $mysql_ssl_cypher = 'DHE-RSA-AES256-SHA', - $php_version = 5, - $queue_driver = 'redis', - $queue_conn = 'openstackid', - $mail_from_email = 'no-reply@openstack.org', - $mail_from_name = 'no-reply@openstack.org', - $support_email = 'support@openstack.org', - $user_spam_processor_to = '', - $message_broker_exchange_name = 'message-broker', - $message_broker_host = '', - $message_broker_port = 5672, - $message_broker_vhost = 'databus', - $message_broker_login = '', - $message_broker_password = '', - $message_broker_ssl_enabled = false, - $message_broker_ssl_ca_file = '/etc/rabbitmq-client-ssl/ca-cert.pem', - $message_broker_ssl_ca_file_contents = '', - $message_broker_ssl_client_cert_file = '/etc/rabbitmq-client-ssl/client-cert.pem', - $message_broker_ssl_client_cert_file_contents = '', - $message_broker_ssl_client_key_file = '/etc/rabbitmq-client-ssl/client-key.pem', - $message_broker_ssl_client_key_file_contents = '', - $message_broker_enabled = false, - $cloud_storage_base_url = '', - $cloud_storage_auth_url = '', - $cloud_storage_app_credential_id = '', - $cloud_storage_app_credential_secret = '', - $cloud_storage_project_name = '', - $cloud_storage_region = '', - $cloud_storage_container = '', -) { - - # php5 packages needed for openid server - $php5_packages = [ - 'php5-common', - 'php5-curl', - 'php5-cli', - 'php5-mcrypt', - 'php5-mysqlnd', - 'php5-fpm', - 'php5-json', - 'php5-gmp', - ] - - # php7 packages needed for openid server - - $php7_packages = [ - 'php7.2-common', - 'php7.2-curl', - 'php7.2-cli', - 'php7.2-mysqlnd', - 'php7.2-fpm', - 'php7.2-json', - 'php7.2-gmp', - 'php7.2-xml', - 'php7.2-zip', - 'php7.2-mbstring', - ] - - if($php_version == 7 ){ - $php_service_name = 'php7.2-fpm' - $php_packages = $php7_packages - } - else{ - $php_service_name = 'php5-fpm' - $php_packages = $php5_packages - } - - $main_packages = [ - 'curl', - 'wget', - 'build-essential', - 'software-properties-common', - 'python-software-properties', - 'supervisor', - 'python3-pip', - 'python3-dev', - 'libssl-dev', - 'libffi-dev', - 'python3-setuptools', - 'python3-venv', - 'libmysqlclient-dev', - ] - - package { $main_packages: - ensure => present, - } - - if ($php_version == 7) { - - if ($::lsbdistcodename == 'xenial') { - - apt::ppa { 'ppa:ondrej/php': - require => [ - Package[$main_packages], - ], - notify => Exec['apt_update'], - } - - $php7_requires = [ - Class['apt::update'], - Apt::Ppa['ppa:ondrej/php'], - ] - - } - else{ - - $php7_requires = [ - Class['apt::update'], - Package[$main_packages], - ] - } - - package { $php7_packages: - ensure => present, - provider => 'apt', - require => [ - $php7_requires, - ] - } - - } - else { - - package { $php5_packages: - ensure => present, - require => [ - Package[$main_packages], - ], - } - - } - - if ($php_version == 7) { - - # php7-fpm configuration - - file { '/etc/php/7.2/fpm/php-fpm.conf': - ensure => present, - owner => 'root', - group => 'www-data', - mode => '0640', - source => 'puppet:///modules/openstackid/php7/php-fpm.conf', - require => [ - Package[$php_service_name], - ], - notify => Service[$php_service_name], - } - - file { '/etc/php/7.2/fpm/php.ini': - ensure => present, - owner => 'root', - group => 'www-data', - mode => '0640', - source => 'puppet:///modules/openstackid/php7/php.ini', - require => [ - Package[$php_service_name], - ], - notify => Service[$php_service_name], - } - - file { '/etc/php/7.2/fpm/pool.d/www.conf': - ensure => present, - owner => 'root', - group => 'www-data', - mode => '0640', - source => 'puppet:///modules/openstackid/php7/www.conf', - require => [ - Package[$php_service_name], - ], - notify => Service[$php_service_name], - } - - service { $php_service_name: - ensure => 'running', - enable => true, - require => Package[$php_service_name], - } - } - else{ - - # php5-fpm configuration - - exec { 'enable_php5-mbcrypt': - command => '/usr/sbin/php5enmod mcrypt', - timeout => 0, - require => [ - Package[$php_service_name], - ], - notify => Service[$php_service_name], - } - - file { '/etc/php5/fpm/php-fpm.conf': - ensure => present, - owner => 'root', - group => 'www-data', - mode => '0640', - source => 'puppet:///modules/openstackid/php-fpm.conf', - require => [ - Package[$php_service_name], - ], - notify => Service[$php_service_name], - } - - file { '/etc/php5/fpm/php.ini': - ensure => present, - owner => 'root', - group => 'www-data', - mode => '0640', - source => 'puppet:///modules/openstackid/php.ini', - require => [ - Package[$php_service_name], - ], - notify => Service[$php_service_name], - } - - file { '/etc/php5/fpm/pool.d/www.conf': - ensure => present, - owner => 'root', - group => 'www-data', - mode => '0640', - source => 'puppet:///modules/openstackid/www.conf', - require => [ - Package[$php_service_name], - ], - notify => Service[$php_service_name], - } - - service { $php_service_name: - ensure => 'running', - enable => true, - require => Package[$php_service_name], - } - } - - # the deploy scripts use the curl CLI - if !defined(Package['curl']) { - package { 'curl': - ensure => present, - } - } - - # force 10.x version - class { 'nodejs': - repo_url_suffix => '10.x', - legacy_debian_symlinks => false, - } - - group { 'openstackid': - ensure => present, - } - - user { 'openstackid': - ensure => present, - managehome => true, - comment => 'OpenStackID User', - shell => '/bin/bash', - gid => 'openstackid', - require => Group['openstackid'], - } - - file { '/etc/openstackid': - ensure => directory, - owner => 'root', - group => 'root', - mode => '0755', - } - - file { '/etc/scripts': - ensure => directory, - owner => 'root', - group => 'root', - mode => '0755', - } - - file { '/etc/scripts/supervisor_watchdog.sh': - ensure => present, - content => template('openstackid/supervisor_watchdog.sh.erb'), - owner => 'root', - group => 'www-data', - mode => '0770', - require => [ - Package['supervisor'], - File['/etc/scripts'], - ] - } - - file { '/etc/supervisor/conf.d/supervisor.conf': - ensure => present, - content => template('openstackid/supervisor.conf.erb'), - owner => 'root', - group => 'www-data', - mode => '0640', - require => [ - Package['supervisor'], - ] - } - - file { '/etc/openstackid/.env': - ensure => present, - content => template('openstackid/.env.erb'), - owner => 'root', - group => 'www-data', - mode => '0640', - require => [ - File['/etc/openstackid'], - ] - } - - # mysql ssl connection configuration - if($mysql_ssl_enabled) { - - file { '/etc/mysql-client-ssl': - ensure => 'directory', - owner => 'root', - group => 'www-data', - mode => '0775', - } - - if $mysql_ssl_ca_file_contents != '' { - file { $mysql_ssl_ca_file: - ensure => file, - owner => 'root', - group => 'www-data', - mode => '0640', - content => $mysql_ssl_ca_file_contents, - notify => Class['apache::service'], - before => Apache::Vhost::Custom[$vhost_name], - require => File['/etc/mysql-client-ssl'], - } - } - - if $mysql_ssl_client_key_file_contents != '' { - file { $mysql_ssl_client_key_file: - ensure => file, - owner => 'root', - group => 'www-data', - mode => '0640', - content => $mysql_ssl_client_key_file_contents, - notify => Class['apache::service'], - before => Apache::Vhost::Custom[$vhost_name], - require => File['/etc/mysql-client-ssl'], - } - } - - if $mysql_ssl_client_cert_file_contents != '' { - file { $mysql_ssl_client_cert_file: - ensure => file, - owner => 'root', - group => 'www-data', - mode => '0640', - content => $mysql_ssl_client_cert_file_contents, - notify => Class['apache::service'], - before => Apache::Vhost::Custom[$vhost_name], - require => File['/etc/mysql-client-ssl'], - } - } - } - - # rabbitmq ssl connection config - if($message_broker_ssl_enabled and $message_broker_enabled){ - file { '/etc/rabbitmq-client-ssl': - ensure => 'directory', - owner => 'root', - group => 'www-data', - mode => '0775', - } - - if $message_broker_ssl_ca_file_contents != '' { - file { $message_broker_ssl_ca_file: - ensure => file, - owner => 'root', - group => 'www-data', - mode => '0640', - content => $message_broker_ssl_ca_file_contents, - notify => Class['apache::service'], - before => Apache::Vhost::Custom[$vhost_name], - require => File['/etc/rabbitmq-client-ssl'], - } - } - - if $message_broker_ssl_client_cert_file_contents != '' { - file { $message_broker_ssl_client_cert_file: - ensure => file, - owner => 'root', - group => 'www-data', - mode => '0640', - content => $message_broker_ssl_client_cert_file_contents, - notify => Class['apache::service'], - before => Apache::Vhost::Custom[$vhost_name], - require => File['/etc/rabbitmq-client-ssl'], - } - } - - if $message_broker_ssl_client_key_file_contents != '' { - file { $message_broker_ssl_client_key_file: - ensure => file, - owner => 'root', - group => 'www-data', - mode => '0640', - content => $message_broker_ssl_client_key_file_contents, - notify => Class['apache::service'], - before => Apache::Vhost::Custom[$vhost_name], - require => File['/etc/rabbitmq-client-ssl'], - } - } - } - - $docroot_dirs = [ '/srv/openstackid' ] - - file { $docroot_dirs: - ensure => directory, - owner => 'root', - group => 'root', - mode => '0755', - } - - class { 'apache': - default_vhost => false, - mpm_module => false, - } - - # apache mpm event connection tweaking - class {'apache::mod::event': - serverlimit => 16, - startservers => 3, - threadlimit => 256, - threadsperchild => 256, - maxclients => 4096, - maxrequestsperchild => 5000, - maxrequestworkers => 4096, - } - - apache::listen { '80': } - apache::listen { '443': } - - apache::vhost::custom { $vhost_name: - priority => '50', - content => template('openstackid/vhost.erb'), - require => File[$docroot_dirs], - } - - class { 'apache::mod::ssl': } - class { 'apache::mod::rewrite': } - class { 'apache::mod::proxy': } - class { 'apache::mod::headers': } - - apache::mod { 'proxy_fcgi': } - - if $ssl_cert_file_contents != '' { - file { $ssl_cert_file: - owner => 'root', - group => 'root', - mode => '0640', - content => $ssl_cert_file_contents, - notify => Class['apache::service'], - before => Apache::Vhost::Custom[$vhost_name], - } - } - - if $ssl_key_file_contents != '' { - file { $ssl_key_file: - owner => 'root', - group => 'root', - mode => '0640', - content => $ssl_key_file_contents, - notify => Class['apache::service'], - before => Apache::Vhost::Custom[$vhost_name], - } - } - - if $ssl_chain_file_contents != '' { - file { $ssl_chain_file: - owner => 'root', - group => 'root', - mode => '0640', - content => $ssl_chain_file_contents, - notify => Class['apache::service'], - before => Apache::Vhost::Custom[$vhost_name], - } - } - - file { '/etc/apache2': - ensure => directory, - owner => 'root', - group => 'root', - mode => '0755', - } - - openstackid::deploy { 'deploytool': - } - - file { '/opt/deploy/conf.d/openstackid.conf': - content => template('openstackid/openstackid.conf.erb'), - owner => 'root', - group => 'root', - mode => '0644', - require => Openstackid::Deploy['deploytool'], - } - - $deploy_site_requires = [ - File['/opt/deploy/conf.d/openstackid.conf'], - Apache::Vhost::Custom[$vhost_name], - File['/etc/openstackid/.env'], - Package['curl'], - Package[$php_packages] , - Class['nodejs'], - ] - - $update_site_requires = [ - File['/opt/deploy/conf.d/openstackid.conf'], - Apache::Vhost::Custom[$vhost_name], - File['/etc/openstackid/.env'], - Package[$php_packages] , - Class['nodejs'], - ] - - exec { 'deploy-site': - path => '/usr/local/bin:/usr/bin:/bin', - command => '/opt/deploy/deploy.sh init openstackid', - onlyif => '/opt/deploy/deploy.sh status openstackid | grep N/A', - logoutput => on_failure, - require => $deploy_site_requires, - } - - exec { 'update-site': - path => '/usr/local/bin:/usr/bin:/bin', - command => '/opt/deploy/deploy.sh update openstackid', - onlyif => '/opt/deploy/deploy.sh status openstackid | grep UPDATE', - logoutput => on_failure, - require => $update_site_requires, - } - - # system configuration tweaking - $my_sysctl_settings = { - # redis : http://redis.io/topics/admin - 'vm.overcommit_memory' => { value => 1 }, - 'net.core.rmem_default' => { value => 31457280 }, - 'net.core.rmem_max' => { value => 12582912 }, - 'net.core.wmem_default' => { value => 31457280 }, - 'net.core.wmem_max' => { value => 12582912 }, - # Defines the size of the kernel queue for accepting new connections. - # Increase number of incoming connections - 'net.core.somaxconn' => { value => 4096 }, - # Increase number of incoming connections backlog - 'net.core.netdev_max_backlog' => { value => 65536 }, - 'net.core.optmem_max' => { value => 25165824 }, - # Defines the range of usable ports on your system. - 'net.ipv4.ip_local_port_range' => { value => "10000\t65535"}, - 'net.ipv4.tcp_mem' => { value => "65536\t131072\t262144" }, - 'net.ipv4.udp_mem' => { value => "65536\t131072\t262144" }, - 'net.ipv4.tcp_rmem' => { value => "8192\t87380\t16777216" }, - 'net.ipv4.udp_rmem_min' => { value => 16384 }, - 'net.ipv4.tcp_wmem' => { value => "8192\t65536\t16777216" }, - 'net.ipv4.udp_wmem_min' => { value => 16384 }, - 'net.ipv4.tcp_max_tw_buckets' => { value => 1440000 }, - # Increase the tcp-time-wait buckets pool size to prevent simple DOS attacks - 'net.ipv4.tcp_tw_recycle' => { value => 1 }, - 'net.ipv4.tcp_tw_reuse' => { value => 1 }, - } - - $my_sysctl_defaults = { - } - - create_resources(sysctl::value,$my_sysctl_settings,$my_sysctl_defaults) - - cron { 'InstallLaravelSchedule': - ensure => 'present', - command => "/usr/bin/php ${projectroot}/artisan schedule:run >> /dev/null 2>&1", - user => 'www-data', - minute => '*', - } - - cron { 'InstallSupervisorWatchdog': - ensure => 'present', - command => '/etc/scripts/supervisor_watchdog.sh >> /var/log/supervisor_watchdog.log 2>&1', - user => 'root', - minute => '*/5', - } - -} diff --git a/metadata.json b/metadata.json deleted file mode 100644 index 371047b..0000000 --- a/metadata.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "name": "openstackinfra-openstackid", - "version": "0.0.1", - "author": "Openstack CI", - "summary": "Puppet module for openstackid", - "license": "Apache 2.0", - "source": "https://git.openstack.org/openstack-infra/puppet-openstackid.git", - "project_page": "http://docs.openstack.org/infra/system-config/", - "issues_url": "https://storyboard.openstack.org/#!/project/761", - "operatingsystem_support": [ - { "operatingsystem": "Ubuntu", "operatingsystemrelease": ["12.04"] } - ], - "requirements": [ - { "name": "pe", "version_requirement": ">= 3.2.0 < 3.4.0" }, - { "name": "puppet", "version_requirement": "3.x" } - ], - "dependencies": [ - { "name": "puppetlabs/stdlib", "version_requirement": ">= 3.2.0" }, - { "name": "puppetlabs/mysql", "version_requirement": ">= 0.6.1" }, - { "name": "puppetlabs/apache", "version_requirement": "= 1.8.1" }, - { "name": "openstackinfra/redis", "version_requirement": ">= 0.0.1" }, - { "name": "duritong/puppet-sysctl", "version_requirement": "= v0.0.11" } - ] -} diff --git a/spec/acceptance/nodesets/default.yml b/spec/acceptance/nodesets/default.yml deleted file mode 100644 index 3bb3e62..0000000 --- a/spec/acceptance/nodesets/default.yml +++ /dev/null @@ -1,11 +0,0 @@ -HOSTS: - ubuntu-server-1404-x64: - roles: - - master - platform: ubuntu-14.04-amd64 - box: puppetlabs/ubuntu-14.04-64-nocm - box_url: https://vagrantcloud.com/puppetlabs/ubuntu-14.04-64-nocm - hypervisor: vagrant -CONFIG: - log_level: debug - type: git diff --git a/spec/acceptance/nodesets/nodepool-centos7.yml b/spec/acceptance/nodesets/nodepool-centos7.yml deleted file mode 100644 index c552874..0000000 --- a/spec/acceptance/nodesets/nodepool-centos7.yml +++ /dev/null @@ -1,10 +0,0 @@ -HOSTS: - centos-70-x64: - roles: - - master - platform: el-7-x86_64 - hypervisor: none - ip: 127.0.0.1 -CONFIG: - type: foss - set_env: false diff --git a/spec/acceptance/nodesets/nodepool-trusty.yml b/spec/acceptance/nodesets/nodepool-trusty.yml deleted file mode 100644 index 9fc624e..0000000 --- a/spec/acceptance/nodesets/nodepool-trusty.yml +++ /dev/null @@ -1,10 +0,0 @@ -HOSTS: - ubuntu-14.04-amd64: - roles: - - master - platform: ubuntu-14.04-amd64 - hypervisor: none - ip: 127.0.0.1 -CONFIG: - type: foss - set_env: false diff --git a/spec/acceptance/nodesets/nodepool-xenial.yml b/spec/acceptance/nodesets/nodepool-xenial.yml deleted file mode 100644 index 99dd318..0000000 --- a/spec/acceptance/nodesets/nodepool-xenial.yml +++ /dev/null @@ -1,10 +0,0 @@ -HOSTS: - ubuntu-16.04-amd64: - roles: - - master - platform: ubuntu-16.04-amd64 - hypervisor: none - ip: 127.0.0.1 -CONFIG: - type: foss - set_env: false diff --git a/templates/.env.erb b/templates/.env.erb deleted file mode 100644 index 583ab23..0000000 --- a/templates/.env.erb +++ /dev/null @@ -1,97 +0,0 @@ -APP_ENV="<%= @id_environment %>" -APP_DEBUG=<%= @app_debug %> -APP_KEY="<%= @app_key %>" -APP_URL="<%= @app_url %>" -APP_LOG=daily -APP_TIMEZONE="<%= @app_timezone %>" -APP_LOCALE="<%= @app_locale %>" -APP_VERSION="<%= @app_version %>" - -DB_HOST="<%= @id_mysql_host %>" -DB_DATABASE="<%= @id_db_name %>" -DB_USERNAME="<%= @id_mysql_user %>" -DB_PASSWORD="<%= @id_mysql_password %>" - -DB_USE_SSL=<%= @mysql_ssl_enabled %> -DB_MYSQL_ATTR_SSL_CA="<%= @mysql_ssl_ca_file %>" -DB_MYSQL_ATTR_SSL_KEY="<%= @mysql_ssl_client_key_file %>" -DB_MYSQL_ATTR_SSL_CERT="<%= @mysql_ssl_client_cert_file %>" -DB_MYSQL_ATTR_SSL_CIPHER="<%= @mysql_ssl_cypher %>" - -REDIS_HOST="<%= @redis_host %>" -REDIS_PORT=<%= @redis_port %> -REDIS_DB=<%= @redis_db %> -REDIS_PASSWORD="<%= @redis_password %>" - -QUEUE_DRIVER="<%= @queue_driver %>" -QUEUE_CONN="<%= @queue_conn %>" -QUEUE_DATABASE="<%= @id_db_name %>" - -CACHE_DRIVER="<%= @cache_driver %>" - -SESSION_DRIVER="<%= @session_driver %>" -SESSION_LIFETIME=<%= @session_lifetime %> -SESSION_ENCRYPT=<%= @session_encrypt %> -SESSION_EXPIRE_ON_CLOSE=<%= @session_expire_on_close %> -SESSION_COOKIE_NAME=<%= @session_cookie_name %> -SESSION_COOKIE_PATH=<%= @session_cookie_path %> -SESSION_COOKIE_DOMAIN=<%= @session_cookie_domain %> -SESSION_COOKIE_SECURE=<%= @session_cookie_secure %> -SESSION_COOKIE_HTTP_ONLY=<%= @session_cookie_http_only %> - -MAIL_DRIVER="<%= @email_driver %>" -SENDGRID_API_KEY="<%= @email_send_grid_api_key %>" - -CORS_ALLOWED_HEADERS="origin, content-type, accept, authorization, x-requested-with" -CORS_ALLOWED_METHODS="GET, POST, OPTIONS, PUT, DELETE" -CORS_USE_PRE_FLIGHT_CACHING=false -CORS_MAX_AGE=3200 -CORS_EXPOSED_HEADERS= - -CURL_TIMEOUT=<%= @curl_timeout %> -CURL_ALLOWS_REDIRECT=<%= @curl_allow_redirect %> -CURL_VERIFY_SSL_CERT=<%= @curl_verify_ssl_cert %> - -ASSETS_BASE_URL="<%= @assets_base_url %>" -SSL_ENABLED=<%= @ssl_enable %> -DB_LOG_ENABLED=<%= @db_log_enabled %> - -BANNING_ENABLE=<%= @banning_enabled %> - -LOG_EMAIL_TO="<%= @id_log_error_to_email %>" -LOG_EMAIL_FROM="<%= @id_log_error_from_email %>" -LOG_LEVEL="<%= @app_log_level %>" -LOG_EMAIL_LEVEL="<%= @app_log_email_level %>" - -RECAPTCHA_PUBLIC_KEY="<%= @id_recaptcha_public_key %>" -RECAPTCHA_PRIVATE_KEY="<%= @id_recaptcha_private_key %>" -RECAPTCHA_TEMPLATE="<%= @id_recaptcha_template %>" - -MAIL_FROM_EMAIL="<%= @mail_from_email %>" -MAIL_FROM_NAME="<%= @mail_from_name %>" - -SUPPORT_EMAIL="<%= @support_email %>" -USER_SPAM_PROCESSOR_TO="<%= @user_spam_processor_to %>" - -## RABBIT MQ -RABBITMQ_EXCHANGE_NAME="<%= @message_broker_exchange_name %>" -RABBITMQ_HOST="<%= @message_broker_host %>" -RABBITMQ_PORT=<%= @message_broker_port %> -RABBITMQ_VHOST="<%= @message_broker_vhost %>" -RABBITMQ_LOGIN="<%= @message_broker_login %>" -RABBITMQ_PASSWORD="<%= @message_broker_password %>" -RABBITMQ_SSL=<%= @message_broker_ssl_enabled %> -RABBITMQ_SSL_CAFILE=<%= @message_broker_ssl_ca_file %> -RABBITMQ_SSL_LOCALCERT=<%= @message_broker_ssl_client_cert_file %> -RABBITMQ_SSL_LOCALKEY=<%= @message_broker_ssl_client_key_file %> -ENABLE_MESSAGE_BROKER=<%= @message_broker_enabled %> - -# CLOUD STORAGE - -CLOUD_STORAGE_BASE_URL=<%= @cloud_storage_base_url %> -CLOUD_STORAGE_AUTH_URL=<%= @cloud_storage_auth_url %> -CLOUD_STORAGE_APP_CREDENTIAL_ID=<%= @cloud_storage_app_credential_id %> -CLOUD_STORAGE_APP_CREDENTIAL_SECRET=<%= @cloud_storage_app_credential_secret %> -CLOUD_STORAGE_PROJECT_NAME=<%= @cloud_storage_project_name %> -CLOUD_STORAGE_REGION=<%= @cloud_storage_region %> -CLOUD_STORAGE_CONTAINER=<%= @cloud_storage_container %> \ No newline at end of file diff --git a/templates/openstackid.conf.erb b/templates/openstackid.conf.erb deleted file mode 100644 index f13c780..0000000 --- a/templates/openstackid.conf.erb +++ /dev/null @@ -1,10 +0,0 @@ -SITE_ROOT=/srv/openstackid -SOURCE_TARBALL=https://tarballs.opendev.org/osf/openstackid/openstackid-<%= @openstackid_release %>.tar.gz -LARAVEL_ENV=<%= @id_environment %> -RELEASE_NAME=openstackid-<%= @openstackid_release %>.tar.gz -SOURCE_ROOT=https://tarballs.opendev.org/osf/openstackid/ -USE_DB_SEEDING=<%= @use_db_seeding?1:0 %> -LARAVEL_VERSION=<%= @laravel_version %> -PHP_SERVICE_NAME=<%= @php_service_name %> -REDIS_PORT=<%= @redis_port %> -REDIS_PASSWORD=<%= @redis_password %> diff --git a/templates/supervisor.conf.erb b/templates/supervisor.conf.erb deleted file mode 100644 index f3e4703..0000000 --- a/templates/supervisor.conf.erb +++ /dev/null @@ -1,15 +0,0 @@ -[supervisord] -nodaemon=true -pidfile=/run/supervisord.pid -user=root - -[program:laravel-worker] -process_name=%(program_name)s_%(process_num)02d -command=php <%= @projectroot %>/artisan queue:work -autostart=true -autorestart=true -numprocs=8 -user=www-data -stderr_logfile=/var/log/supervisor_laravel_worker.err.log -stdout_logfile=/var/log/supervisor_laravel_worker.out.log -logfile_maxbytes=10MB diff --git a/templates/supervisor_watchdog.sh.erb b/templates/supervisor_watchdog.sh.erb deleted file mode 100644 index 7e43c3f..0000000 --- a/templates/supervisor_watchdog.sh.erb +++ /dev/null @@ -1,12 +0,0 @@ -#!/usr/bin/env bash -dt=`date '+%d/%m/%Y %H:%M:%S'` -output=$(supervisorctl status | grep -i "FATAL") - -if test -z "$output" -then - echo "[$dt] - everything running just fine" -else - echo "[$dt] - some process has stopped, reloading supervisor" - echo "$output" - supervisorctl reload -fi diff --git a/templates/vhost.erb b/templates/vhost.erb deleted file mode 100644 index 4ee0b9e..0000000 --- a/templates/vhost.erb +++ /dev/null @@ -1,87 +0,0 @@ - - ServerName www.<%= scope.lookupvar("openstackid::vhost_name") %> - ServerAdmin <%= scope.lookupvar("openstackid::serveradmin") %> - - ErrorLog ${APACHE_LOG_DIR}/openstackid-error.log - LogLevel warn - Redirect / https://<%= scope.lookupvar("openstackid::vhost_name") %>/ - - - - - - ServerName <%= scope.lookupvar("openstackid::vhost_name") %> - ServerAdmin <%= scope.lookupvar("openstackid::serveradmin") %> - - ErrorLog ${APACHE_LOG_DIR}/openstackid-error.log - LogLevel warn - Redirect / https://<%= scope.lookupvar("openstackid::vhost_name") %>/ - - - - - - - ServerName www.<%= scope.lookupvar("openstackid::vhost_name") %> - ServerAdmin <%= scope.lookupvar("openstackid::serveradmin") %> - - ErrorLog ${APACHE_LOG_DIR}/openstackid-error.log - LogLevel warn - - SSLEngine on - SSLProtocol All -SSLv2 -SSLv3 - # Once the machine is using something to terminate TLS that supports ECDHE - # then this should be edited to remove the RSA+AESGCM:RSA+AES so that PFS - # only is guarenteed. - SSLCipherSuite ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:RSA+AESGCM:RSA+AES:!AES256:!aNULL:!eNULL:!MD5:!DSS:!PSK:!SRP - SSLHonorCipherOrder on - SSLCertificateFile <%= scope.lookupvar("openstackid::ssl_cert_file") %> - SSLCertificateKeyFile <%= scope.lookupvar("openstackid::ssl_key_file") %> -<% if scope.lookupvar("openstackid::ssl_chain_file") != "" %> - SSLCertificateChainFile <%= scope.lookupvar("openstackid::ssl_chain_file") %> -<% end %> - - Redirect / https://<%= scope.lookupvar("openstackid::vhost_name") %>/ - - - - ServerName <%= scope.lookupvar("openstackid::vhost_name") %> - ServerAdmin <%= scope.lookupvar("openstackid::serveradmin") %> - - ErrorLog ${APACHE_LOG_DIR}/openstackid-ssl-error.log - LogLevel warn - - SSLEngine on - SSLProtocol All -SSLv2 -SSLv3 - # Once the machine is using something to terminate TLS that supports ECDHE - # then this should be edited to remove the RSA+AESGCM:RSA+AES so that PFS - # only is guarenteed. - SSLCipherSuite ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:RSA+AESGCM:RSA+AES:!AES256:!aNULL:!eNULL:!MD5:!DSS:!PSK:!SRP - SSLHonorCipherOrder on - SSLCertificateFile <%= scope.lookupvar("openstackid::ssl_cert_file") %> - SSLCertificateKeyFile <%= scope.lookupvar("openstackid::ssl_key_file") %> -<% if scope.lookupvar("openstackid::ssl_chain_file") != "" %> - SSLCertificateChainFile <%= scope.lookupvar("openstackid::ssl_chain_file") %> -<% end %> - - RewriteEngine on - - RewriteCond %{HTTP_HOST} !<%= scope.lookupvar("openstackid::vhost_name") %> - RewriteRule ^.*$ <%= scope.lookupvar("openstackid::canonicalweburl") %> - - # send basic auth header - RewriteCond %{HTTP:Authorization} ^(.*) - RewriteRule .* - [e=HTTP_AUTHORIZATION:%1] - - DocumentRoot <%= @docroot %> - /> - Options -Indexes +FollowSymLinks +MultiViews - AllowOverride All - - - ProxyPassMatch ^/(.*\.php(/.*)?)$ fcgi://127.0.0.1:9000<%= @docroot %>/$1 retry=0 timeout=1800 - - Header always set Strict-Transport-Security "max-age=31536000; includeSubdomains; preload" - - -