barbican/devstack/lib/barbican

#!/usr/bin/env bash

# Install and start **Barbican** service

# To enable a minimal set of Barbican features, add the following to localrc:
#   enable_service barbican-svc barbican-retry
#
# Dependencies:
# - functions
# - OS_AUTH_URL for auth in api
# - DEST set to the destination directory
# - SERVICE_PASSWORD, SERVICE_PROJECT_NAME for auth in api
# - STACK_USER service user

# stack.sh
# ---------
# install_barbican
# configure_barbican
# init_barbican
# start_barbican
# stop_barbican
# cleanup_barbican

# Save trace setting
XTRACE=$(set +o | grep xtrace)
set +o xtrace

# PyKMIP configuration
PYKMIP_SERVER_KEY=${PYKMIP_SERVER_KEY:-$INT_CA_DIR/private/pykmip-server.key}
PYKMIP_SERVER_CERT=${PYKMIP_SERVER_CERT:-$INT_CA_DIR/pykmip-server.crt}
PYKMIP_CLIENT_KEY=${PYKMIP_CLIENT_KEY:-$INT_CA_DIR/private/pykmip-client.key}
PYKMIP_CLIENT_CERT=${PYKMIP_CLIENT_CERT:-$INT_CA_DIR/pykmip-client.crt}
PYKMIP_CA_PATH=${PYKMIP_CA_PATH:-$INT_CA_DIR/ca-chain.pem}

# Functions
# ---------

# TODO(john-wood-w) These 'magic' functions are called by devstack to enable
# a given service (so the name between 'is_' and '_enabled'). Currently the
# Zuul infra gate configuration (at https://github.com/openstack-infra/project-config/blob/master/jenkins/jobs/barbican.yaml)
# only enables the 'barbican' service. So the two functions below, for the two
# services we wish to run, have to key off of that lone 'barbican' selection.
# Once the Zuul config is updated to add these two services properly, then
# these functions should be replaced by the single method below.
# !!!! Special thanks to rm_work for figuring this out !!!!
function is_barbican-retry_enabled {
    [[ ,${ENABLED_SERVICES} =~ ,"barbican" ]] && return 0
}

function is_barbican-svc_enabled {
    [[ ,${ENABLED_SERVICES} =~ ,"barbican" ]] && return 0
}

# TODO(john-wood-w) Replace the above two functions with the one below once
# Zuul is update per above.
## Test if any Barbican services are enabled
## is_barbican_enabled
#function is_barbican_enabled {
#    [[ ,${ENABLED_SERVICES} =~ ,"barbican-" ]] && return 0
#    return 1
#}

# cleanup_barbican - Remove residual data files, anything left over from previous
# runs that a clean run would need to clean up
function cleanup_barbican {
    :
}

# configure_barbicanclient - Set config files, create data dirs, etc
function configure_barbicanclient {
    setup_develop $BARBICANCLIENT_DIR
}

# configure_dogtag_plugin - Change config to use dogtag plugin
function configure_dogtag_plugin {
    sudo openssl pkcs12 -in /root/.dogtag/pki-tomcat/ca_admin_cert.p12 -passin pass:PASSWORD -out $BARBICAN_CONF_DIR/kra_admin_cert.pem -nodes
    sudo chown $USER $BARBICAN_CONF_DIR/kra_admin_cert.pem
    iniset $BARBICAN_CONF dogtag_plugin dogtag_port 8373
    iniset $BARBICAN_CONF secretstore enabled_secretstore_plugins dogtag_crypto
    iniset $BARBICAN_CONF certificate enabled_certificate_plugins dogtag
}

# configure_barbican - Set config files, create data dirs, etc
function configure_barbican {
    setup_develop $BARBICAN_DIR

    [ ! -d $BARBICAN_CONF_DIR ] && sudo mkdir -m 755 -p $BARBICAN_CONF_DIR
    sudo chown $USER $BARBICAN_CONF_DIR

    [ ! -d $BARBICAN_API_LOG_DIR ] &&  sudo mkdir -m 755 -p $BARBICAN_API_LOG_DIR
    sudo chown $USER $BARBICAN_API_LOG_DIR

    [ ! -d $BARBICAN_CONF_DIR ] && sudo mkdir -m 755 -p $BARBICAN_CONF_DIR
    sudo chown $USER $BARBICAN_CONF_DIR

    # Copy the barbican config files to the config dir
    cp $BARBICAN_DIR/etc/barbican/barbican.conf $BARBICAN_CONF_DIR
    cp $BARBICAN_DIR/etc/barbican/barbican-api-paste.ini $BARBICAN_CONF_DIR
    cp -R $BARBICAN_DIR/etc/barbican/vassals $BARBICAN_CONF_DIR

    # Copy functional test config
    cp $BARBICAN_DIR/etc/barbican/barbican-functional.conf $BARBICAN_CONF_DIR

    # Do not set to DEBUG
    iniset $BARBICAN_CONF DEFAULT debug False

    # Set the host_href
    iniset $BARBICAN_CONF DEFAULT host_href "$BARBICAN_HOST_HREF"

    # Set the log file location
    iniset $BARBICAN_CONF DEFAULT log_file "$BARBICAN_API_LOG_DIR/barbican.log"

    # Format logging
    if [ "$LOG_COLOR" == "True" ] && [ "$SYSLOG" == "False" ]; then
        setup_colorized_logging $BARBICAN_CONF DEFAULT project user
    fi

    # Install the policy file for the API server
    cp $BARBICAN_DIR/etc/barbican/policy.json $BARBICAN_CONF_DIR
    iniset $BARBICAN_CONF DEFAULT policy_file $BARBICAN_CONF_DIR/policy.json

    # Set the database connection url
    iniset $BARBICAN_CONF DEFAULT sql_connection `database_connection_url barbican`

    # Disable auto-migration when deploying Barbican
    iniset $BARBICAN_CONF DEFAULT db_auto_create False

    # Increase default request buffer size, keystone auth PKI tokens can be very long
    iniset $BARBICAN_CONF_DIR/vassals/barbican-api.ini uwsgi buffer-size 65535

    # Rabbit settings
    if is_service_enabled rabbit; then
        iniset $BARBICAN_CONF 'secrets' broker rabbit://guest:$RABBIT_PASSWORD@$RABBIT_HOST
    else
        echo_summary "Barbican requires that the RabbitMQ service is enabled"
    fi

    ## Set up keystone

    # Turn on the middleware
    iniset $BARBICAN_PASTE_CONF 'pipeline:barbican_api' pipeline 'barbican-api-keystone'

    # Set the keystone parameters
    iniset $BARBICAN_PASTE_CONF 'filter:authtoken' auth_plugin password
    iniset $BARBICAN_PASTE_CONF 'filter:authtoken' auth_url $KEYSTONE_AUTH_URI_V3
    iniset $BARBICAN_PASTE_CONF 'filter:authtoken' username barbican
    iniset $BARBICAN_PASTE_CONF 'filter:authtoken' password $SERVICE_PASSWORD
    iniset $BARBICAN_PASTE_CONF 'filter:authtoken' user_domain_id default
    iniset $BARBICAN_PASTE_CONF 'filter:authtoken' project_name $SERVICE_PROJECT_NAME
    iniset $BARBICAN_PASTE_CONF 'filter:authtoken' project_domain_id default
    iniset $BARBICAN_PASTE_CONF 'filter:authtoken' auth_uri $KEYSTONE_SERVICE_URI_V3
    iniset $BARBICAN_PASTE_CONF 'filter:authtoken' signing_dir $BARBICAN_AUTH_CACHE_DIR
}

# init_barbican - Initialize etc.
function init_barbican {
    # Create cache dir
    sudo mkdir -p $BARBICAN_AUTH_CACHE_DIR
    sudo chown $STACK_USER $BARBICAN_AUTH_CACHE_DIR
    rm -f $BARBICAN_AUTH_CACHE_DIR/*

    recreate_database barbican utf8

    $BARBICAN_BIN_DIR/barbican-manage db upgrade -v head
}

# install_barbican - Collect source and prepare
function install_barbican {
    # Install package requirements
    if is_fedora; then
        install_package sqlite-devel openldap-devel
    fi
    # TODO(ravips): We need this until barbican gets into devstack
    setup_develop $BARBICAN_DIR
    pip_install 'uwsgi'
}

# install_barbicanclient - Collect source and prepare
function install_barbicanclient {
    git_clone $BARBICANCLIENT_REPO $BARBICANCLIENT_DIR $BARBICANCLIENT_BRANCH
    setup_develop $BARBICANCLIENT_DIR
}

# start_barbican - Start running processes, including screen
function start_barbican {
    # Start the Barbican service up.
    run_process barbican-svc "uwsgi --master --emperor $BARBICAN_CONF_DIR/vassals"

    # Pause while the barbican-svc populates the database, otherwise the retry
    # service below might try to do this at the same time, leading to race
    # conditions.
    sleep 10

    # Start the retry scheduler server up.
    run_process barbican-retry "$BARBICAN_BIN_DIR/barbican-retry --config-file=$BARBICAN_CONF_DIR/barbican-api.conf"
}

# stop_barbican - Stop running processes
function stop_barbican {
    # This will eventually be refactored to work like
    # Solum and Manila (script to kick off a wsgiref server)
    # For now, this will stop uWSGI rather than have it hang
    killall -9 uwsgi

    # This cleans up the PID file, but uses pkill so Barbican
    # uWSGI emperor process doesn't actually stop
    stop_process barbican-svc

    stop_process barbican-retry
}

function get_id {
    echo `"$@" | awk '/ id / { print $4 }'`
}

function create_barbican_accounts {
    #
    # Setup Default Admin User
    #
    SERVICE_PROJECT=$(openstack project list | awk "/ $SERVICE_PROJECT_NAME / { print \$2 }")
    ADMIN_ROLE=$(openstack role list | awk "/ admin / { print \$2 }")

    BARBICAN_USER=$(openstack user create \
                                --password "$SERVICE_PASSWORD" \
                                --project $SERVICE_PROJECT \
                                --email "barbican@example.com" \
                                barbican \
                                | grep " id " | get_field 2)
    openstack role add --project $SERVICE_PROJECT \
                            --user $BARBICAN_USER \
                            $ADMIN_ROLE
    #
    # Setup Default service-admin User
    #
    SERVICE_ADMIN=$(get_id openstack user create \
        --password "$SERVICE_PASSWORD" \
        --email "service-admin@example.com" \
        "service-admin")
    SERVICE_ADMIN_ROLE=$(get_id openstack role create \
        "key-manager:service-admin")
    openstack role add \
        --user "$SERVICE_ADMIN" \
        --project "$SERVICE_PROJECT" \
        "$SERVICE_ADMIN_ROLE"
    #
    # Setup RBAC User Projects and Roles
    #
    PASSWORD="barbican"
    PROJECT_A_ID=$(get_id openstack project create "project_a")
    PROJECT_B_ID=$(get_id openstack project create "project_b")
    ROLE_ADMIN_ID=$(get_id openstack role show admin)
    ROLE_CREATOR_ID=$(get_id openstack role create "creator")
    ROLE_OBSERVER_ID=$(get_id openstack role create "observer")
    ROLE_AUDIT_ID=$(get_id openstack role create "audit")
    #
    # Setup RBAC Admin of Project A
    #
    USER_ID=$(get_id openstack user create \
        --password "$PASSWORD" \
        --email "admin_a@example.net" \
        "project_a_admin")
    openstack role add \
        --user "$USER_ID" \
        --project "$PROJECT_A_ID" \
        "$ROLE_ADMIN_ID"
    #
    # Setup RBAC Creator of Project A
    #
    USER_ID=$(get_id openstack user create \
        --password "$PASSWORD" \
        --email "creator_a@example.net" \
        "project_a_creator")
    openstack role add \
        --user "$USER_ID" \
        --project "$PROJECT_A_ID" \
        "$ROLE_CREATOR_ID"
    # Adding second creator user in project_a
    USER_ID=$(openstack user create \
        --password "$PASSWORD" \
        --email "creator2_a@example.net" \
        "project_a_creator_2" -f value -c id)
    openstack role add \
        --user "$USER_ID" \
        --project "$PROJECT_A_ID" \
        "$ROLE_CREATOR_ID"
    #
    # Setup RBAC Observer of Project A
    #
    USER_ID=$(get_id openstack user create \
        --password "$PASSWORD" \
        --email "observer_a@example.net" \
        "project_a_observer")
    openstack role add \
        --user "$USER_ID" \
        --project "$PROJECT_A_ID" \
        "$ROLE_OBSERVER_ID"
    #
    # Setup RBAC Auditor of Project A
    #
    USER_ID=$(get_id openstack user create \
        --password "$PASSWORD" \
        --email "auditor_a@example.net" \
        "project_a_auditor")
    openstack role add \
        --user "$USER_ID" \
        --project "$PROJECT_A_ID" \
        "$ROLE_AUDIT_ID"
    #
    # Setup RBAC Admin of Project B
    #
    USER_ID=$(get_id openstack user create \
        --password "$PASSWORD" \
        --email "admin_b@example.net" \
        "project_b_admin")
    openstack role add \
        --user "$USER_ID" \
        --project "$PROJECT_B_ID" \
        "$ROLE_ADMIN_ID"
    #
    # Setup RBAC Creator of Project B
    #
    USER_ID=$(get_id openstack user create \
        --password "$PASSWORD" \
        --email "creator_b@example.net" \
        "project_b_creator")
    openstack role add \
        --user "$USER_ID" \
        --project "$PROJECT_B_ID" \
        "$ROLE_CREATOR_ID"
    #
    # Setup RBAC Observer of Project B
    #
    USER_ID=$(get_id openstack user create \
        --password "$PASSWORD" \
        --email "observer_b@example.net" \
        "project_b_observer")
    openstack role add \
        --user "$USER_ID" \
        --project "$PROJECT_B_ID" \
        "$ROLE_OBSERVER_ID"
    #
    # Setup RBAC auditor of Project B
    #
    USER_ID=$(get_id openstack user create \
        --password "$PASSWORD" \
        --email "auditor_b@example.net" \
        "project_b_auditor")
    openstack role add \
        --user "$USER_ID" \
        --project "$PROJECT_B_ID" \
        "$ROLE_AUDIT_ID"
    #
    # Setup Barbican Endpoint
    #
    if [[ "$KEYSTONE_CATALOG_BACKEND" = 'sql' ]]; then
        BARBICAN_SERVICE=$(openstack service create \
            --name barbican \
            --description "Barbican Service" \
            'key-manager' \
            | grep " id " | get_field 2)
        openstack endpoint create \
            --os-identity-api-version 3 \
            --region RegionOne \
            $BARBICAN_SERVICE \
            public "http://$SERVICE_HOST:9311"
        openstack endpoint create \
            --os-identity-api-version 3 \
            --region RegionOne \
            $BARBICAN_SERVICE \
            internal "http://$SERVICE_HOST:9311"
    fi

}

# PyKMIP functions
# ----------------

# install_pykmip - install the PyKMIP python module
# create keys and certificate for server
function install_pykmip {
    pip_install 'pykmip'

    if is_service_enabled pykmip-server; then
        [ ! -d ${PYKMIP_CONF_DIR} ] && sudo mkdir -p ${PYKMIP_CONF_DIR}
        sudo chown ${USER} ${PYKMIP_CONF_DIR}
        [ ! -d ${PYKMIP_LOG_DIR} ] && sudo mkdir -p ${PYKMIP_LOG_DIR}
        sudo chown ${USER} ${PYKMIP_LOG_DIR}

        init_CA
        if [ ! -e ${PYKMIP_SERVER_KEY} ]; then
            make_cert ${INT_CA_DIR} 'pykmip-server' 'pykmip-server'
            chmod 400 ${PYKMIP_SERVER_KEY}
        fi
        if [ ! -e ${PYKMIP_CLIENT_KEY} ]; then
            make_cert ${INT_CA_DIR} 'pykmip-client' 'pykmip-client'
            chmod 400 ${PYKMIP_CLIENT_KEY}
        fi

        if [ ! -e ${PYKMIP_CONF} ]; then
            cat > ${PYKMIP_CONF} <<EOF
[server]
hostname=127.0.0.1
port=5696
certificate_path=${PYKMIP_SERVER_CERT}
key_path=${PYKMIP_SERVER_KEY}
ca_path=${PYKMIP_CA_PATH}
auth_suite=Basic
EOF
       fi
   fi
}

# configure_pykmip - enable KMIP plugin and configure
function configure_pykmip {
    iniset $BARBICAN_CONF secretstore enabled_secretstore_plugins kmip_plugin
    iniset $BARBICAN_CONF kmip_plugin username demo
    iniset $BARBICAN_CONF kmip_plugin password secretpassword
    iniset $BARBICAN_CONF kmip_plugin keyfile ${PYKMIP_CLIENT_KEY}
    iniset $BARBICAN_CONF kmip_plugin certfile ${PYKMIP_CLIENT_CERT}
    iniset $BARBICAN_CONF kmip_plugin ca_certs ${PYKMIP_CA_PATH}
}

# start_pykmip - start the PyKMIP server
function start_pykmip {
    run_process pykmip-server "pykmip-server -f \'${PYKMIP_CONF}\' -l \'${PYKMIP_LOG_DIR}/pykmip-devstack.log\'"
}

# Dogtag functions
# ----------------

function install_389_directory_server {
    # Make sure that 127.0.0.1 resolves to localhost.localdomain (fqdn)
    sudo sed -i 's/127.0.0.1[ \t]*localhost localhost.localdomain/127.0.0.1\tlocalhost.localdomain localhost/' /etc/hosts

    install_package 389-ds-base
    sudo mkdir -p /etc/389-ds

    # Instead of spawning a sub-shell to cat this whole chunk into the desired
    # file. I just cat it into a temporary file that this user will have access
    # to, and subsequently use elevated privileges to move the already made
    # file where we need it to be.
    cat > .tmp.setup.inf <<EOF
[General]
FullMachineName= localhost.localdomain
SuiteSpotUserID= nobody
SuiteSpotGroup= nobody

[slapd]
ServerPort= 389
ServerIdentifier= pki-tomcat
Suffix= dc=example,dc=com
RootDN= cn=Directory Manager
RootDNPwd= PASSWORD
EOF

    sudo mv .tmp.setup.inf /etc/389-ds/setup.inf

    sudo setup-ds.pl --silent --file=/etc/389-ds/setup.inf
}

function install_dogtag_ca {
    install_package pki-ca
    sudo mkdir -p /etc/dogtag

    cat > .tmp.ca.cfg <<EOF
[CA]
pki_admin_email=caadmin@example.com
pki_admin_name=caadmin
pki_admin_nickname=caadmin
pki_admin_password=PASSWORD
pki_admin_uid=caadmin
pki_backup_password=PASSWORD
pki_client_database_password=PASSWORD
pki_client_database_purge=False
pki_client_pkcs12_password=PASSWORD
pki_clone_pkcs12_password=PASSWORD
pki_ds_base_dn=dc=ca,dc=example,dc=com
pki_ds_database=ca
pki_ds_password=PASSWORD
pki_hostname=localhost
pki_security_domain_name=EXAMPLE
pki_token_password=PASSWORD
pki_https_port=8373
pki_http_port=8370
pki_ajp_port=8379
pki_tomcat_server_port=8375
EOF

    sudo mv .tmp.ca.cfg /etc/dogtag/ca.cfg

    sudo pkispawn -v -f /etc/dogtag/ca.cfg -s CA
}

function wait_for_ca {
    while true; do
        # If the sleep command is executed "as-is", the subprocess that it
        # executes will trigger the "exit_trap" and will cause this script to
        # fail. To avoid this, we run the sleep command inside this sub-shell,
        # so the signal will not be caught in this process.
        ca_running=$(sleep 2 && curl -s -k https://localhost:8373/ca/admin/ca/getStatus | grep -c running)
        if [[ $ca_running == 1 ]]; then
            break
        fi
    done
}

function install_dogtag_kra {
    install_package pki-kra
    sudo mkdir -p /etc/dogtag

    # Even though we are using localhost.localdomain, the server certificate by
    # default will get the real host name for the server. So we need to
    # properly configure the KRA to try to communicate with the real host name
    # instead of the localhost.
    cat > .tmp.kra.cfg <<EOF
[KRA]
pki_admin_cert_file=/root/.dogtag/pki-tomcat/ca_admin.cert
pki_admin_email=kraadmin@example.com
pki_admin_name=kraadmin
pki_admin_nickname=kraadmin
pki_admin_password=PASSWORD
pki_admin_uid=kraadmin
pki_backup_password=PASSWORD
pki_client_database_password=PASSWORD
pki_client_database_purge=False
pki_client_pkcs12_password=PASSWORD
pki_clone_pkcs12_password=PASSWORD
pki_ds_base_dn=dc=kra,dc=example,dc=com
pki_ds_database=kra
pki_ds_password=PASSWORD
pki_hostname=localhost
pki_security_domain_name=EXAMPLE
pki_security_domain_user=caadmin
pki_security_domain_password=PASSWORD
pki_token_password=PASSWORD
pki_https_port=8373
pki_http_port=8370
pki_ajp_port=8379
pki_tomcat_server_port=8375
pki_security_domain_hostname=localhost
pki_security_domain_https_port=8373
EOF

    sudo mv .tmp.kra.cfg /etc/dogtag/kra.cfg

    sudo pkispawn -v -f /etc/dogtag/kra.cfg -s KRA
}

function install_dogtag_plugin_dependencies {
    install_package nss-devel
}

function install_dogtag_components {
    install_dogtag_plugin_dependencies
    install_389_directory_server
    install_dogtag_ca
    wait_for_ca
    install_dogtag_kra
}


# Restore xtrace
$XTRACE