openstack/charm-neutron-api
Code Issues Proposed changes
59158c417f
charm-neutron-api/config.yaml
Liam Young a8e6824e3a Add QoS support 
This patch adds the enable-qos option to the charm. If enable-qos is
set then neutron.services.qos.qos_plugin.QoSPlugin is added to
service_plugins in neutron.conf locally. The
neutron-plugin-api-relation has also been updated to send the
enable-qos option to charms connected over that relation (for
example neutron-openvswitch and neutron-gateway).

As part of this some of the logic for setting service_plugins was
removed from the neutron.conf and placed in the NeutronCCContext.

This patch is based on the steps in:
https://docs.openstack.org/mitaka/networking-guide/config-qos.html

Change-Id: I1beba9bebdb7766fd95d47bf13b6f4ad86e762b5
Partial-Bug: #1705358
2017-09-25 16:35:12 +00:00

695 lines
23 KiB
YAML
Executable File
Raw Blame History

options:
debug:
type: boolean
default: False
description: Enable debug logging.
verbose:
type: boolean
default: False
description: Enable verbose logging.
use-syslog:
type: boolean
default: False
description: |
Setting this to True will allow supporting services to log to syslog.
openstack-origin:
type: string
default: distro
description: |
Repository from which to install. May be one of the following:
distro (default), ppa:somecustom/ppa, a deb url sources entry,
or a supported Ubuntu Cloud Archive e.g.
.
cloud:<series>-<openstack-release>
cloud:<series>-<openstack-release>/updates
cloud:<series>-<openstack-release>/staging
cloud:<series>-<openstack-release>/proposed
.
See https://wiki.ubuntu.com/OpenStack/CloudArchive for info on which
cloud archives are available and supported.
.
NOTE: updating this setting to a source that is known to provide
a later version of OpenStack will trigger a software upgrade unless
action-managed-upgrade is set to True.
openstack-origin-git:
type: string
default:
description: |
Specifies a default OpenStack release name, or a YAML dictionary
listing the git repositories to install from.
.
The default Openstack release name may be one of the following, where
the corresponding OpenStack github branch will be used:
* liberty
* mitaka
* newton
* master
.
The YAML must minimally include the following repositories, and may
also include repositories for other dependencies:
repositories:
- {name: requirements,
repository: 'git://github.com/openstack/requirements',
branch: master}
- {name: networking-hyperv,
repository: 'git://github.com/openstack/networking-hyperv',
branch: master}
- {name: neutron-fwaas,
repository: 'git://github.com/openstack/neutron-fwaas',
branch: master}
- {name: neutron-lbaas,
repository: 'git://github.com/openstack/neutron-lbaas',
branch: master}
- {name: neutron-vpnaas,
repository: 'git://github.com/openstack/neutron-vpnaas',
branch: master}
- {name: neutron,
repository: 'git://github.com/openstack/neutron',
branch: master}
release: master
extra-key:
type: string
default:
description: Optional key for archive containing additional packages.
extra-source:
type: string
default:
description: Optional source for archive containing additional packages.
action-managed-upgrade:
type: boolean
default: False
description: |
If True enables openstack upgrades for this charm via juju actions.
You will still need to set openstack-origin to the new repository but
instead of an upgrade running automatically across all units, it will
wait for you to execute the openstack-upgrade action for this charm on
each unit. If False it will revert to existing behavior of upgrading
all units on config change.
harden:
default:
type: string
description: |
Apply system hardening. Supports a space-delimited list of modules
to run. Supported modules currently include os, ssh, apache and mysql.
rabbit-user:
type: string
default: neutron
description: Username used to access rabbitmq queue.
rabbit-vhost:
type: string
default: openstack
description: Rabbitmq vhost name.
database-user:
type: string
default: neutron
description: Username for Neutron database access (if enabled).
database:
type: string
default: neutron
description: Database name for Neutron (if enabled).
region:
type: string
default: RegionOne
description: OpenStack region name.
use-internal-endpoints:
type: boolean
default: False
description: |
Openstack mostly defaults to using public endpoints for internal
communication between services. If set to True this option will
configure services to use internal endpoints where possible.
neutron-security-groups:
type: boolean
default: False
description: Use Neutron for security group management.
neutron-external-network:
type: string
default: ext_net
description: |
Name of the external network for floating IP addresses provided by
Neutron.
network-device-mtu:
type: int
default:
description: |
The MTU size for interfaces managed by neutron. If unset or set to
0, no value will be applied. This value will be provided to
neutron-plugin-api relations.
.
NOTE: This option is deprecated and will be removed in Newton.
Please use the system-wide global-physnet-mtu setting which the
agents will take into account when wiring VIFs.
neutron-plugin:
type: string
default: ovs
description: |
Neutron plugin to use for network management; supports
.
ovs - OpenvSwitch Plugin
vsp - Nuage Networks VSP
nsx - VMWare NSX
Calico - Project Calico Networking
midonet - MidoNet
plumgrid - PLUMgrid
.
overlay-network-type:
type: string
default: gre
description: |
Overlay network types to use, valid options include:
.
gre
vxlan
.
Multiple types can be provided - field is space delimited. To disable
overlay networks set to the empty string ''
flat-network-providers:
type: string
default:
description: |
Space-delimited list of Neutron flat network providers.
vlan-ranges:
type: string
default: "physnet1:1000:2000"
description: |
Space-delimited list of <physical_network>:<vlan_min>:<vlan_max> or
<physical_network> specifying physical_network names usable for VLAN
provider and tenant networks, as well as ranges of VLAN tags on each
available for allocation to tenant networks.
vni-ranges:
type: string
default: "1001:2000"
description: |
Space-delimited list of <vxlan_min>:<vxlan_max> for VXLAN provider.
enable-ml2-port-security:
type: boolean
default: False
description: Enable port security extension for ML2 plugin (>= kilo).
enable-ml2-dns:
type: boolean
default: False
description: |
Enables the Neutron DNS extension driver (>= mitaka). When enabled,
ports attached to Nova instances will have DNS names assigned based
on the instance name.
haproxy-server-timeout:
type: int
default:
description: |
Server timeout configuration in ms for haproxy, used in HA
configurations. If not provided, default value of 30000ms is used.
haproxy-client-timeout:
type: int
default:
description: |
Client timeout configuration in ms for haproxy, used in HA
configurations. If not provided, default value of 30000ms is used.
haproxy-queue-timeout:
type: int
default:
description: |
Queue timeout configuration in ms for haproxy, used in HA
configurations. If not provided, default value of 5000ms is used.
haproxy-connect-timeout:
type: int
default:
description: |
Connect timeout configuration in ms for haproxy, used in HA
configurations. If not provided, default value of 5000ms is used.
enable-sriov:
type: boolean
default: False
description: |
Enable SR-IOV networking support across Neutron and Nova.
supported-pci-vendor-devs:
type: string
default:
description: |
NOTE: Required for OpenStack versions Kilo, Liberty and Mitaka. Ignored
for OpenStack Newton and newer.
.
Space-delimited list of supported Vendor PCI Devices, in format
vendor_id:product_id
.
Example: 15b3:1004 8086:10ca
.
This must be set to match available hardware on nova-compute units.
Neutron will refuse to bind ports to hardware with Vendor PCI IDs not
in this list. (Use lspci -nn to get IDs)
.
NOTE: The vendor_id:product_id of the PFs and VFs differ. Make sure to
enter the correct one for your use case.
midonet-origin:
type: string
default: midonet-2015.06
description: |
'mem-1.8', 'mem-1.9',
'midonet-2015.06'
.
NOTE: updating this setting to a source that is known to provide a later
version of MidoNet (do not change between MEM and MidoNet) will
trigger a software upgrade.
mem-username:
type: string
default:
description: |
The Midokura Enterprise MidoNet username credentials to access the
repository.
mem-password:
type: string
default:
description: |
The Midokura Enterprise MidoNet password credentials to access the
repository.
config-flags:
type: string
default:
description: |
Comma-separated list of key=value config flags. These values will be
placed in the neutron.conf [DEFAULT] section.
.
WARNING: this is not the recommended way to configure the underlying
services that this charm installs and is used at the user's own risk.
This option is mainly provided as a stop-gap for users that either
want to test the effect of modifying some config or who have found
a critical bug in the way the charm has configured their services
and need it fixed immediately. We ask that whenever this is used,
that the user consider opening a bug on this charm at
http://bugs.launchpad.net/charm-neutron-api providing an explanation of
why the config was needed so that we may consider it for inclusion as a
natively supported config in the the charm.
default-tenant-network-type:
type: string
default:
description: |
The default type for a tenant network e.g. vxlan, vlan, gre etc
global-physnet-mtu:
type: int
default: 1500
description: |
MTU of the underlying physical network. Neutron uses this value to
calculate MTU for all virtual network components. For flat and
VLAN networks, neutron uses this value without modification. For
overlay networks such as VXLAN, neutron automatically subtracts
the overlay protocol overhead from this value.
.
NOTE: This options is available starting from Mitaka release.
path-mtu:
type: int
default:
description: |
Maximum size of an IP packet (MTU) that can traverse the
underlying physical network infrastructure without fragmentation
when using an overlay/tunnel protocol. This option allows
specifying a physical network MTU value that differs from the
default global-physnet-mtu value.
dns-domain:
type: string
default: openstack.example.
description: |
Specifies the dns domain name that should be used for building instance
hostnames. An empty option or the value of 'openstacklocal' will cause
the dhcp agents to broadcast the default domain of openstacklocal and
will not enable internal cloud dns resolution. This value should end
with a '.', e.g. 'cloud.example.org.'.
l2-population:
type: boolean
default: True
description: |
Populate the forwarding tables of virtual switches (LinuxBridge or OVS),
to decrease broadcast traffics inside the physical networks fabric while
using overlays networks (VXLan, GRE).
manage-neutron-plugin-legacy-mode:
type: boolean
default: True
description: |
If True neutron-server will install neutron packages for the plugin
configured.
enable-dvr:
type: boolean
default: False
description: |
Enable Distributed Virtual Routing (juno and above).
enable-l3ha:
type: boolean
default: False
description: |
Enable L3 HA (juno and above).
max-l3-agents-per-router:
type: int
default: 2
description: |
Maximum number of l3 agents to host a router. Only used when enable-l3ha
is True.
min-l3-agents-per-router:
default: 2
type: int
description: |
Minimum number of l3 agents to host a router. Only used when enable-l3ha
is True.
dhcp-agents-per-network:
type: int
default: 1
description: |
The number of dhcp agents to be deployed per network. Note that if the
Calico plugin is being used, this option has no effect.
worker-multiplier:
type: float
default:
description: |
The CPU core multiplier to use when configuring worker processes for
this service. By default, the number of workers for each daemon is set
to twice the number of CPU cores a service unit has. When deployed in a
LXD container, this default value will be capped to 4 workers unless this
configuration option is set.
polling-interval:
type: int
default: 2
description: |
The number of seconds the agent will wait between polling for local device changes.
Used by neutron l2 agents.
rpc-response-timeout:
type: int
default: 60
description: |
Seconds to wait for a response from a call.
Used by all neutron agents (includes l2 agents and other types of agents).
report-interval:
type: int
default: 30
description: |
Seconds between nodes reporting state to server; should be less than agent_down_time,
best if it is half or less than agent_down_time.
Used by all neutron agents (includes l2 agents and other types of agents).
enable-qos:
type: boolean
default: False
description: |
Enable QoS (assuming the plug-in or ml2 mechanism driver can support it)
# Quota config
quota-security-group:
type: int
default: 10
description: |
Number of security groups allowed per tenant. A negative value means
unlimited.
quota-security-group-rule:
type: int
default: 100
description: |
Number of security group rules allowed per tenant. A negative value means
unlimited
quota-network:
type: int
default: 10
description: |
Number of networks allowed per tenant. A negative value means unlimited.
quota-subnet:
type: int
default: 10
description: |
Number of subnets allowed per tenant. A negative value means unlimited.
quota-port:
type: int
default: 50
description: |
Number of ports allowed per tenant. A negative value means unlimited.
quota-vip:
type: int
default: 10
description: |
Number of vips allowed per tenant. A negative value means unlimited.
quota-pool:
type: int
default: 10
description: |
Number of pools allowed per tenant. A negative value means unlimited.
quota-member:
type: int
default: -1
description: |
Number of pool members allowed per tenant. A negative value means
unlimited. The default is unlimited because a member is not a real
resource consumer on Openstack. However, on back-end, a member is a
resource consumer and that is the reason why quota is possible.
quota-health-monitors:
type: int
default: -1
description: |
Number of health monitors allowed per tenant. A negative value means
unlimited.
The default is unlimited because a health monitor is not a real resource
consumer on Openstack. However, on back-end, a member is a resource
consumer and that is the reason why quota is possible.
quota-router:
default: 10
type: int
description: |
Number of routers allowed per tenant. A negative value means unlimited.
quota-floatingip:
type: int
default: 50
description: |
Number of floating IPs allowed per tenant. A negative value means
unlimited.
# HA config
dns-ha:
type: boolean
default: False
description: |
Use DNS HA with MAAS 2.0. Note if this is set do not set vip* settings.
vip:
type: string
default:
description: |
Virtual IP(s) to use to front API services in HA configuration.
.
If multiple networks are being used, a VIP should be provided for each
network, separated by spaces.
vip_iface:
type: string
default: eth0
description: |
Default network interface to use for HA vip when it cannot be
automatically determined.
vip_cidr:
type: int
default: 24
description: |
Default CIDR netmask to use for HA vip when it cannot be automatically
determined.
ha-bindiface:
type: string
default: eth0
description: |
Default network interface on which HA cluster will bind to communication
with the other members of the HA Cluster.
ha-mcastport:
type: int
default: 5424
description: |
Default multicast port number that will be used to communicate between
HA Cluster nodes.
# Network config (by default all access is over 'private-address')
os-admin-network:
type: string
default:
description: |
The IP address and netmask of the OpenStack Admin network (e.g.
192.168.0.0/24)
.
This network will be used for admin endpoints.
os-internal-network:
type: string
default:
description: |
The IP address and netmask of the OpenStack Internal network (e.g.
192.168.0.0/24)
.
This network will be used for internal endpoints.
os-public-network:
type: string
default:
description: |
The IP address and netmask of the OpenStack Public network (e.g.
192.168.0.0/24)
.
This network will be used for public endpoints.
os-public-hostname:
type: string
default:
description: |
The hostname or address of the public endpoints created for neutron-api
in the keystone identity provider.
.
This value will be used for public endpoints. For example, an
os-public-hostname set to 'neutron-api.example.com' with ssl enabled
will create the following endpoint for neutron-api:
.
https://neutron-api.example.com:9696/
os-internal-hostname:
type: string
default:
description: |
The hostname or address of the internal endpoints created for neutron-api
in the keystone identity provider.
.
This value will be used for internal endpoints. For example, an
os-internal-hostname set to 'neutron-api.internal.example.com' with ssl
enabled will create a internal endpoint for neutron-api:
.
https://neutron-api.internal.example.com:9696/
os-admin-hostname:
type: string
default:
description: |
The hostname or address of the admin endpoints created for neutron-api
in the keystone identity provider.
.
This value will be used for admin endpoints. For example, an
os-admin-hostname set to 'neutron-api.admin.example.com' with ssl enabled
will create a internal endpoint for neutron-api:
.
https://neutron-api.admin.example.com:9696/
ssl_cert:
type: string
default:
description: |
SSL certificate to install and use for API ports. Setting this value
and ssl_key will enable reverse proxying, point Neutron's entry in the
Keystone catalog to use https, and override any certificate and key
issued by Keystone (if it is configured to do so).
ssl_key:
type: string
default:
description: SSL key to use with certificate specified as ssl_cert.
ssl_ca:
type: string
default:
description: |
SSL CA to use with the certificate and key provided - this is only
required if you are providing a privately signed ssl_cert and ssl_key.
prefer-ipv6:
type: boolean
default: False
description: |
If True enables IPv6 support. The charm will expect network interfaces
to be configured with an IPv6 address. If set to False (default) IPv4
is expected.
.
NOTE: these charms do not currently support IPv6 privacy extension. In
order for this charm to function correctly, the privacy extension must be
disabled and a non-temporary address must be configured/available on
your network interface.
# Monitoring config
nagios_context:
type: string
default: "juju"
description: |
Used by the nrpe-external-master subordinate charm. A string that will
be prepended to instance name to set the host name in nagios. So for
instance the hostname would be something like 'juju-myservice-0'. If
you are running multiple environments with the same services in them
this allows you to differentiate between them.
nagios_servicegroups:
type: string
default: ""
description: |
A comma-separated list of nagios servicegroups. If left empty, the
nagios_context will be used as the servicegroup
# Nuage plugin (VSD) config
nuage-packages:
type: string
default: "nuage-openstack-neutron nuagenetlib"
description: |
Its [nuage-openstack-neutron nuagenetlib] for Nuage VSP >=3.2R4 & KILO
and [nuage-neutron python-nuagenetlib] of Nuage VSP <=3.0 & JUNO
vsd-cms-id:
type: string
default:
description: |
CMS ID is used as an authentication token from VSD to CMS.
This value is being generated via nuage scripts and can be set pre/post
deployment.
vsd-cms-name:
type: string
default:
description: |
This is required only for 3.2 R4 and above releases of Nuage and Kilo.
Please give Maas env id so that it is unique per openstack cluster. This
name is used to create th CMS ID on Nuage-VSD which should be unique per
OSP cluster. Your Deployment will fail if this config is not provided.
vsd-server:
type: string
default:
description: Nuage VSD Server
vsd-auth:
type: string
default: "csproot:csproot"
description: Username Password to connect to Nuage VSD Server
vsd-organization:
type: string
default: csp
description: Name of the organization in Nuage VSD
vsd-auth-ssl:
type: boolean
default: True
description: SSL authentication of the Nuage VSD Server
vsd-base-uri:
type: string
default: "/nuage/api/v3_0"
description: Nuage VSD API endpoint URI
vsd-auth-resource:
type: string
default: "/me"
description: Nuage VSD authentication resource
vsd-netpart-name:
type: string
default: juju-enterprise
description: Name of the Organization or Enterprise to create in Nuage VSD
# VMware NSX plugin config
nsx-controllers:
type: string
default:
description: Space delimited addresses of NSX controllers
nsx-username:
type: string
default: admin
description: Username to connect to NSX controllers with
nsx-password:
type: string
default: admin
description: Password to connect to NSX controllers with
nsx-tz-uuid:
type: string
default:
description: |
This is uuid of the default NSX Transport zone that will be used for
creating tunneled isolated Neutron networks. It needs to be created in
NSX before starting Neutron with the nsx plugin.
nsx-l3-uuid:
type: string
default:
description: This is uuid of the default NSX L3 Gateway Service.
# PLUMgrid Plugin config
plumgrid-username:
type: string
default: plumgrid
description: Username to access PLUMgrid Director
plumgrid-password:
type: string
default: plumgrid
description: Password to access PLUMgrid Director
plumgrid-virtual-ip:
type: string
default:
description: IP address of PLUMgrid Director
# Calico plugin config
calico-origin:
type: string
default:
description: |
Repository from which to install Calico packages. If set, must be
a PPA URL, of the form ppa:somecustom/ppa. Changing this value
after installation will force an immediate software upgrade.
View Git Blame Copy Permalink