Enable Bionic as a gate test

Change bionic test from dev to gate for 18.05.

Change-Id: I327d75e17a67bcd49223482579d1bdc0ecf48c24

hooks/charmhelpers/contrib/hahelpers/apache.py

@@ -65,7 +65,8 @@ def get_ca_cert():
     if ca_cert is None:
         log("Inspecting identity-service relations for CA SSL certificate.",
             level=INFO)
-        for r_id in relation_ids('identity-service'):
+        for r_id in (relation_ids('identity-service') +
+                     relation_ids('identity-credentials')):
             for unit in relation_list(r_id):
                 if ca_cert is None:
                     ca_cert = relation_get('ca_cert',
@@ -76,7 +77,7 @@ def get_ca_cert():
 def retrieve_ca_cert(cert_file):
     cert = None
     if os.path.isfile(cert_file):
-        with open(cert_file, 'r') as crt:
+        with open(cert_file, 'rb') as crt:
             cert = crt.read()
     return cert
 

hooks/charmhelpers/contrib/hahelpers/cluster.py

@@ -371,6 +371,7 @@ def distributed_wait(modulo=None, wait=None, operation_name='operation'):
     ''' Distribute operations by waiting based on modulo_distribution
 
     If modulo and or wait are not set, check config_get for those values.
+    If config values are not set, default to modulo=3 and wait=30.
 
     :param modulo: int The modulo number creates the group distribution
     :param wait: int The constant time wait value
@@ -382,10 +383,17 @@ def distributed_wait(modulo=None, wait=None, operation_name='operation'):
     :side effect: Calls time.sleep()
     '''
     if modulo is None:
-        modulo = config_get('modulo-nodes')
+        modulo = config_get('modulo-nodes') or 3
     if wait is None:
-        wait = config_get('known-wait')
+        wait = config_get('known-wait') or 30
-    calculated_wait = modulo_distribution(modulo=modulo, wait=wait)
+    if juju_is_leader():
+        # The leader should never wait
+        calculated_wait = 0
+    else:
+        # non_zero_wait=True guarantees the non-leader who gets modulo 0
+        # will still wait
+        calculated_wait = modulo_distribution(modulo=modulo, wait=wait,
+                                              non_zero_wait=True)
     msg = "Waiting {} seconds for {} ...".format(calculated_wait,
                                                  operation_name)
     log(msg, DEBUG)

hooks/charmhelpers/contrib/network/ovs/__init__.py

@@ -102,6 +102,8 @@ def add_ovsbridge_linuxbridge(name, bridge):
             log('Interface {} already exists'.format(interface), level=INFO)
             return
 
+    check_for_eni_source()
+
     with open('/etc/network/interfaces.d/{}.cfg'.format(
             linuxbridge_port), 'w') as config:
         config.write(BRIDGE_TEMPLATE.format(linuxbridge_port=linuxbridge_port,
@@ -155,9 +157,40 @@ def get_certificate():
         return None
 
 
+def check_for_eni_source():
+    ''' Juju removes the source line when setting up interfaces,
+    replace if missing '''
+
+    with open('/etc/network/interfaces', 'r') as eni:
+        for line in eni:
+            if line == 'source /etc/network/interfaces.d/*':
+                return
+    with open('/etc/network/interfaces', 'a') as eni:
+        eni.write('\nsource /etc/network/interfaces.d/*')
+
+
 def full_restart():
     ''' Full restart and reload of openvswitch '''
     if os.path.exists('/etc/init/openvswitch-force-reload-kmod.conf'):
         service('start', 'openvswitch-force-reload-kmod')
     else:
         service('force-reload-kmod', 'openvswitch-switch')
+
+
+def enable_ipfix(bridge, target):
+    '''Enable IPfix on bridge to target.
+    :param bridge: Bridge to monitor
+    :param target: IPfix remote endpoint
+    '''
+    cmd = ['ovs-vsctl', 'set', 'Bridge', bridge, 'ipfix=@i', '--',
+           '--id=@i', 'create', 'IPFIX', 'targets="{}"'.format(target)]
+    log('Enabling IPfix on {}.'.format(bridge))
+    subprocess.check_call(cmd)
+
+
+def disable_ipfix(bridge):
+    '''Diable IPfix on target bridge.
+    :param bridge: Bridge to modify
+    '''
+    cmd = ['ovs-vsctl', 'clear', 'Bridge', bridge, 'ipfix']
+    subprocess.check_call(cmd)

hooks/charmhelpers/contrib/openstack/amulet/deployment.py

@@ -21,6 +21,9 @@ from collections import OrderedDict
 from charmhelpers.contrib.amulet.deployment import (
     AmuletDeployment
 )
+from charmhelpers.contrib.openstack.amulet.utils import (
+    OPENSTACK_RELEASES_PAIRS
+)
 
 DEBUG = logging.DEBUG
 ERROR = logging.ERROR
@@ -271,11 +274,8 @@ class OpenStackAmuletDeployment(AmuletDeployment):
            release.
            """
         # Must be ordered by OpenStack release (not by Ubuntu release):
-        (self.trusty_icehouse, self.trusty_kilo, self.trusty_liberty,
+        for i, os_pair in enumerate(OPENSTACK_RELEASES_PAIRS):
-         self.trusty_mitaka, self.xenial_mitaka, self.xenial_newton,
+            setattr(self, os_pair, i)
-         self.yakkety_newton, self.xenial_ocata, self.zesty_ocata,
-         self.xenial_pike, self.artful_pike, self.xenial_queens,
-         self.bionic_queens,) = range(13)
 
         releases = {
             ('trusty', None): self.trusty_icehouse,

hooks/charmhelpers/contrib/openstack/amulet/utils.py

@@ -50,6 +50,13 @@ ERROR = logging.ERROR
 
 NOVA_CLIENT_VERSION = "2"
 
+OPENSTACK_RELEASES_PAIRS = [
+    'trusty_icehouse', 'trusty_kilo', 'trusty_liberty',
+    'trusty_mitaka', 'xenial_mitaka', 'xenial_newton',
+    'yakkety_newton', 'xenial_ocata', 'zesty_ocata',
+    'xenial_pike', 'artful_pike', 'xenial_queens',
+    'bionic_queens']
+
 
 class OpenStackAmuletUtils(AmuletUtils):
     """OpenStack amulet utilities.
@@ -63,7 +70,34 @@ class OpenStackAmuletUtils(AmuletUtils):
         super(OpenStackAmuletUtils, self).__init__(log_level)
 
     def validate_endpoint_data(self, endpoints, admin_port, internal_port,
-                               public_port, expected):
+                               public_port, expected, openstack_release=None):
+        """Validate endpoint data. Pick the correct validator based on
+           OpenStack release. Expected data should be in the v2 format:
+           {
+               'id': id,
+               'region': region,
+               'adminurl': adminurl,
+               'internalurl': internalurl,
+               'publicurl': publicurl,
+               'service_id': service_id}
+
+           """
+        validation_function = self.validate_v2_endpoint_data
+        xenial_queens = OPENSTACK_RELEASES_PAIRS.index('xenial_queens')
+        if openstack_release and openstack_release >= xenial_queens:
+                validation_function = self.validate_v3_endpoint_data
+                expected = {
+                    'id': expected['id'],
+                    'region': expected['region'],
+                    'region_id': 'RegionOne',
+                    'url': self.valid_url,
+                    'interface': self.not_null,
+                    'service_id': expected['service_id']}
+        return validation_function(endpoints, admin_port, internal_port,
+                                   public_port, expected)
+
+    def validate_v2_endpoint_data(self, endpoints, admin_port, internal_port,
+                                  public_port, expected):
         """Validate endpoint data.
 
            Validate actual endpoint data vs expected endpoint data. The ports
@@ -141,7 +175,86 @@ class OpenStackAmuletUtils(AmuletUtils):
         if len(found) != expected_num_eps:
             return 'Unexpected number of endpoints found'
 
-    def validate_svc_catalog_endpoint_data(self, expected, actual):
+    def convert_svc_catalog_endpoint_data_to_v3(self, ep_data):
+        """Convert v2 endpoint data into v3.
+
+           {
+               'service_name1': [
+                   {
+                       'adminURL': adminURL,
+                       'id': id,
+                       'region': region.
+                       'publicURL': publicURL,
+                       'internalURL': internalURL
+                   }],
+               'service_name2': [
+                   {
+                       'adminURL': adminURL,
+                       'id': id,
+                       'region': region.
+                       'publicURL': publicURL,
+                       'internalURL': internalURL
+                   }],
+           }
+          """
+        self.log.warn("Endpoint ID and Region ID validation is limited to not "
+                      "null checks after v2 to v3 conversion")
+        for svc in ep_data.keys():
+            assert len(ep_data[svc]) == 1, "Unknown data format"
+            svc_ep_data = ep_data[svc][0]
+            ep_data[svc] = [
+                {
+                    'url': svc_ep_data['adminURL'],
+                    'interface': 'admin',
+                    'region': svc_ep_data['region'],
+                    'region_id': self.not_null,
+                    'id': self.not_null},
+                {
+                    'url': svc_ep_data['publicURL'],
+                    'interface': 'public',
+                    'region': svc_ep_data['region'],
+                    'region_id': self.not_null,
+                    'id': self.not_null},
+                {
+                    'url': svc_ep_data['internalURL'],
+                    'interface': 'internal',
+                    'region': svc_ep_data['region'],
+                    'region_id': self.not_null,
+                    'id': self.not_null}]
+        return ep_data
+
+    def validate_svc_catalog_endpoint_data(self, expected, actual,
+                                           openstack_release=None):
+        """Validate service catalog endpoint data. Pick the correct validator
+           for the OpenStack version. Expected data should be in the v2 format:
+           {
+               'service_name1': [
+                   {
+                       'adminURL': adminURL,
+                       'id': id,
+                       'region': region.
+                       'publicURL': publicURL,
+                       'internalURL': internalURL
+                   }],
+               'service_name2': [
+                   {
+                       'adminURL': adminURL,
+                       'id': id,
+                       'region': region.
+                       'publicURL': publicURL,
+                       'internalURL': internalURL
+                   }],
+           }
+
+           """
+        validation_function = self.validate_v2_svc_catalog_endpoint_data
+        xenial_queens = OPENSTACK_RELEASES_PAIRS.index('xenial_queens')
+        if openstack_release and openstack_release >= xenial_queens:
+            validation_function = self.validate_v3_svc_catalog_endpoint_data
+            expected = self.convert_svc_catalog_endpoint_data_to_v3(expected)
+        return validation_function(expected, actual)
+
+    def validate_v2_svc_catalog_endpoint_data(self, expected, actual):
         """Validate service catalog endpoint data.
 
            Validate a list of actual service catalog endpoints vs a list of
@@ -328,7 +441,7 @@ class OpenStackAmuletUtils(AmuletUtils):
             if rel.get('api_version') != str(api_version):
                 raise Exception("api_version not propagated through relation"
                                 " data yet ('{}' != '{}')."
-                                "".format(rel['api_version'], api_version))
+                                "".format(rel.get('api_version'), api_version))
 
     def keystone_configure_api_version(self, sentry_relation_pairs, deployment,
                                        api_version):
@@ -350,16 +463,13 @@ class OpenStackAmuletUtils(AmuletUtils):
         deployment._auto_wait_for_status()
         self.keystone_wait_for_propagation(sentry_relation_pairs, api_version)
 
-    def authenticate_cinder_admin(self, keystone_sentry, username,
+    def authenticate_cinder_admin(self, keystone, api_version=2):
-                                  password, tenant, api_version=2):
         """Authenticates admin user with cinder."""
-        # NOTE(beisner): cinder python client doesn't accept tokens.
+        self.log.debug('Authenticating cinder admin...')
-        keystone_ip = keystone_sentry.info['public-address']
-        ept = "http://{}:5000/v2.0".format(keystone_ip.strip().decode('utf-8'))
         _clients = {
             1: cinder_client.Client,
             2: cinder_clientv2.Client}
-        return _clients[api_version](username, password, tenant, ept)
+        return _clients[api_version](session=keystone.session)
 
     def authenticate_keystone(self, keystone_ip, username, password,
                               api_version=False, admin_port=False,
@@ -367,13 +477,36 @@ class OpenStackAmuletUtils(AmuletUtils):
                               project_domain_name=None, project_name=None):
         """Authenticate with Keystone"""
         self.log.debug('Authenticating with keystone...')
-        port = 5000
+        if not api_version:
-        if admin_port:
+            api_version = 2
-            port = 35357
+        sess, auth = self.get_keystone_session(
-        base_ep = "http://{}:{}".format(keystone_ip.strip().decode('utf-8'),
+            keystone_ip=keystone_ip,
-                                        port)
+            username=username,
-        if not api_version or api_version == 2:
+            password=password,
-            ep = base_ep + "/v2.0"
+            api_version=api_version,
+            admin_port=admin_port,
+            user_domain_name=user_domain_name,
+            domain_name=domain_name,
+            project_domain_name=project_domain_name,
+            project_name=project_name
+        )
+        if api_version == 2:
+            client = keystone_client.Client(session=sess)
+        else:
+            client = keystone_client_v3.Client(session=sess)
+        # This populates the client.service_catalog
+        client.auth_ref = auth.get_access(sess)
+        return client
+
+    def get_keystone_session(self, keystone_ip, username, password,
+                             api_version=False, admin_port=False,
+                             user_domain_name=None, domain_name=None,
+                             project_domain_name=None, project_name=None):
+        """Return a keystone session object"""
+        ep = self.get_keystone_endpoint(keystone_ip,
+                                        api_version=api_version,
+                                        admin_port=admin_port)
+        if api_version == 2:
             auth = v2.Password(
                 username=username,
                 password=password,
@@ -381,12 +514,7 @@ class OpenStackAmuletUtils(AmuletUtils):
                 auth_url=ep
             )
             sess = keystone_session.Session(auth=auth)
-            client = keystone_client.Client(session=sess)
-            # This populates the client.service_catalog
-            client.auth_ref = auth.get_access(sess)
-            return client
         else:
-            ep = base_ep + "/v3"
             auth = v3.Password(
                 user_domain_name=user_domain_name,
                 username=username,
@@ -397,10 +525,57 @@ class OpenStackAmuletUtils(AmuletUtils):
                 auth_url=ep
             )
             sess = keystone_session.Session(auth=auth)
-            client = keystone_client_v3.Client(session=sess)
+        return (sess, auth)
-            # This populates the client.service_catalog
+
-            client.auth_ref = auth.get_access(sess)
+    def get_keystone_endpoint(self, keystone_ip, api_version=None,
-            return client
+                              admin_port=False):
+        """Return keystone endpoint"""
+        port = 5000
+        if admin_port:
+            port = 35357
+        base_ep = "http://{}:{}".format(keystone_ip.strip().decode('utf-8'),
+                                        port)
+        if api_version == 2:
+            ep = base_ep + "/v2.0"
+        else:
+            ep = base_ep + "/v3"
+        return ep
+
+    def get_default_keystone_session(self, keystone_sentry,
+                                     openstack_release=None):
+        """Return a keystone session object and client object assuming standard
+           default settings
+
+           Example call in amulet tests:
+               self.keystone_session, self.keystone = u.get_default_keystone_session(
+                   self.keystone_sentry,
+                   openstack_release=self._get_openstack_release())
+
+           The session can then be used to auth other clients:
+               neutronclient.Client(session=session)
+               aodh_client.Client(session=session)
+               eyc
+        """
+        self.log.debug('Authenticating keystone admin...')
+        api_version = 2
+        client_class = keystone_client.Client
+        # 11 => xenial_queens
+        if openstack_release and openstack_release >= 11:
+            api_version = 3
+            client_class = keystone_client_v3.Client
+        keystone_ip = keystone_sentry.info['public-address']
+        session, auth = self.get_keystone_session(
+            keystone_ip,
+            api_version=api_version,
+            username='admin',
+            password='openstack',
+            project_name='admin',
+            user_domain_name='admin_domain',
+            project_domain_name='admin_domain')
+        client = client_class(session=session)
+        # This populates the client.service_catalog
+        client.auth_ref = auth.get_access(session)
+        return session, client
 
     def authenticate_keystone_admin(self, keystone_sentry, user, password,
                                     tenant=None, api_version=None,

hooks/charmhelpers/contrib/openstack/context.py

@@ -384,6 +384,7 @@ class IdentityServiceContext(OSContextGenerator):
                     # so a missing value just indicates keystone needs
                     # upgrading
                     ctxt['admin_tenant_id'] = rdata.get('service_tenant_id')
+                    ctxt['admin_domain_id'] = rdata.get('service_domain_id')
                     return ctxt
 
         return {}
@@ -796,9 +797,9 @@ class ApacheSSLContext(OSContextGenerator):
             key_filename = 'key'
 
         write_file(path=os.path.join(ssl_dir, cert_filename),
-                   content=b64decode(cert))
+                   content=b64decode(cert), perms=0o640)
         write_file(path=os.path.join(ssl_dir, key_filename),
-                   content=b64decode(key))
+                   content=b64decode(key), perms=0o640)
 
     def configure_ca(self):
         ca_cert = get_ca_cert()
@@ -1872,10 +1873,11 @@ class EnsureDirContext(OSContextGenerator):
     context is needed to do that before rendering a template.
    '''
 
-    def __init__(self, dirname):
+    def __init__(self, dirname, **kwargs):
         '''Used merely to ensure that a given directory exists.'''
         self.dirname = dirname
+        self.kwargs = kwargs
 
     def __call__(self):
-        mkdir(self.dirname)
+        mkdir(self.dirname, **self.kwargs)
         return {}

hooks/charmhelpers/contrib/openstack/templates/section-oslo-middleware

@@ -0,0 +1,5 @@
+[oslo_middleware]
+
+# Bug #1758675
+enable_proxy_headers_parsing = true
+

hooks/charmhelpers/contrib/openstack/templates/section-oslo-notifications

@@ -5,4 +5,7 @@ transport_url = {{ transport_url }}
 {% if notification_topics -%}
 topics = {{ notification_topics }}
 {% endif -%}
+{% if notification_format -%}
+notification_format = {{ notification_format }}
+{% endif -%}
 {% endif -%}

hooks/charmhelpers/contrib/openstack/utils.py

@@ -182,7 +182,7 @@ SWIFT_CODENAMES = OrderedDict([
     ('pike',
         ['2.13.0', '2.15.0']),
     ('queens',
-        ['2.16.0']),
+        ['2.16.0', '2.17.0']),
 ])
 
 # >= Liberty version->codename mapping
@@ -306,7 +306,7 @@ def get_os_codename_install_source(src):
 
     if src.startswith('cloud:'):
         ca_rel = src.split(':')[1]
-        ca_rel = ca_rel.split('%s-' % ubuntu_rel)[1].split('/')[0]
+        ca_rel = ca_rel.split('-')[1].split('/')[0]
         return ca_rel
 
     # Best guess match based on deb string provided

hooks/charmhelpers/contrib/openstack/vaultlocker.py

@@ -0,0 +1,126 @@
+# Copyright 2018 Canonical Limited.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#  http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import json
+import os
+
+import charmhelpers.contrib.openstack.alternatives as alternatives
+import charmhelpers.contrib.openstack.context as context
+
+import charmhelpers.core.hookenv as hookenv
+import charmhelpers.core.host as host
+import charmhelpers.core.templating as templating
+import charmhelpers.core.unitdata as unitdata
+
+VAULTLOCKER_BACKEND = 'charm-vaultlocker'
+
+
+class VaultKVContext(context.OSContextGenerator):
+    """Vault KV context for interaction with vault-kv interfaces"""
+    interfaces = ['secrets-storage']
+
+    def __init__(self, secret_backend=None):
+        super(context.OSContextGenerator, self).__init__()
+        self.secret_backend = (
+            secret_backend or 'charm-{}'.format(hookenv.service_name())
+        )
+
+    def __call__(self):
+        db = unitdata.kv()
+        last_token = db.get('last-token')
+        secret_id = db.get('secret-id')
+        for relation_id in hookenv.relation_ids(self.interfaces[0]):
+            for unit in hookenv.related_units(relation_id):
+                data = hookenv.relation_get(unit=unit,
+                                            rid=relation_id)
+                vault_url = data.get('vault_url')
+                role_id = data.get('{}_role_id'.format(hookenv.local_unit()))
+                token = data.get('{}_token'.format(hookenv.local_unit()))
+
+                if all([vault_url, role_id, token]):
+                    token = json.loads(token)
+                    vault_url = json.loads(vault_url)
+
+                    # Tokens may change when secret_id's are being
+                    # reissued - if so use token to get new secret_id
+                    if token != last_token:
+                        secret_id = retrieve_secret_id(
+                            url=vault_url,
+                            token=token
+                        )
+                        db.set('secret-id', secret_id)
+                        db.set('last-token', token)
+                        db.flush()
+
+                    ctxt = {
+                        'vault_url': vault_url,
+                        'role_id': json.loads(role_id),
+                        'secret_id': secret_id,
+                        'secret_backend': self.secret_backend,
+                    }
+                    vault_ca = data.get('vault_ca')
+                    if vault_ca:
+                        ctxt['vault_ca'] = json.loads(vault_ca)
+                    self.complete = True
+                    return ctxt
+        return {}
+
+
+def write_vaultlocker_conf(context, priority=100):
+    """Write vaultlocker configuration to disk and install alternative
+
+    :param context: Dict of data from vault-kv relation
+    :ptype: context: dict
+    :param priority: Priority of alternative configuration
+    :ptype: priority: int"""
+    charm_vl_path = "/var/lib/charm/{}/vaultlocker.conf".format(
+        hookenv.service_name()
+    )
+    host.mkdir(os.path.dirname(charm_vl_path), perms=0o700)
+    templating.render(source='vaultlocker.conf.j2',
+                      target=charm_vl_path,
+                      context=context, perms=0o600),
+    alternatives.install_alternative('vaultlocker.conf',
+                                     '/etc/vaultlocker/vaultlocker.conf',
+                                     charm_vl_path, priority)
+
+
+def vault_relation_complete(backend=None):
+    """Determine whether vault relation is complete
+
+    :param backend: Name of secrets backend requested
+    :ptype backend: string
+    :returns: whether the relation to vault is complete
+    :rtype: bool"""
+    vault_kv = VaultKVContext(secret_backend=backend or VAULTLOCKER_BACKEND)
+    vault_kv()
+    return vault_kv.complete
+
+
+# TODO: contrib a high level unwrap method to hvac that works
+def retrieve_secret_id(url, token):
+    """Retrieve a response-wrapped secret_id from Vault
+
+    :param url: URL to Vault Server
+    :ptype url: str
+    :param token: One shot Token to use
+    :ptype token: str
+    :returns: secret_id to use for Vault Access
+    :rtype: str"""
+    import hvac
+    client = hvac.Client(url=url, token=token)
+    response = client._post('/v1/sys/wrapping/unwrap')
+    if response.status_code == 200:
+        data = response.json()
+        return data['data']['secret_id']

hooks/charmhelpers/contrib/storage/linux/ceph.py

@@ -291,7 +291,7 @@ class Pool(object):
 
 class ReplicatedPool(Pool):
     def __init__(self, service, name, pg_num=None, replicas=2,
-                 percent_data=10.0):
+                 percent_data=10.0, app_name=None):
         super(ReplicatedPool, self).__init__(service=service, name=name)
         self.replicas = replicas
         if pg_num:
@@ -301,6 +301,10 @@ class ReplicatedPool(Pool):
             self.pg_num = min(pg_num, max_pgs)
         else:
             self.pg_num = self.get_pgs(self.replicas, percent_data)
+        if app_name:
+            self.app_name = app_name
+        else:
+            self.app_name = 'unknown'
 
     def create(self):
         if not pool_exists(self.service, self.name):
@@ -313,6 +317,12 @@ class ReplicatedPool(Pool):
                 update_pool(client=self.service,
                             pool=self.name,
                             settings={'size': str(self.replicas)})
+                try:
+                    set_app_name_for_pool(client=self.service,
+                                          pool=self.name,
+                                          name=self.app_name)
+                except CalledProcessError:
+                    log('Could not set app name for pool {}'.format(self.name, level=WARNING))
             except CalledProcessError:
                 raise
 
@@ -320,10 +330,14 @@ class ReplicatedPool(Pool):
 # Default jerasure erasure coded pool
 class ErasurePool(Pool):
     def __init__(self, service, name, erasure_code_profile="default",
-                 percent_data=10.0):
+                 percent_data=10.0, app_name=None):
         super(ErasurePool, self).__init__(service=service, name=name)
         self.erasure_code_profile = erasure_code_profile
         self.percent_data = percent_data
+        if app_name:
+            self.app_name = app_name
+        else:
+            self.app_name = 'unknown'
 
     def create(self):
         if not pool_exists(self.service, self.name):
@@ -355,6 +369,12 @@ class ErasurePool(Pool):
                    'erasure', self.erasure_code_profile]
             try:
                 check_call(cmd)
+                try:
+                    set_app_name_for_pool(client=self.service,
+                                          pool=self.name,
+                                          name=self.app_name)
+                except CalledProcessError:
+                    log('Could not set app name for pool {}'.format(self.name, level=WARNING))
             except CalledProcessError:
                 raise
 
@@ -778,6 +798,25 @@ def update_pool(client, pool, settings):
     check_call(cmd)
 
 
+def set_app_name_for_pool(client, pool, name):
+    """
+    Calls `osd pool application enable` for the specified pool name
+
+    :param client: Name of the ceph client to use
+    :type client: str
+    :param pool: Pool to set app name for
+    :type pool: str
+    :param name: app name for the specified pool
+    :type name: str
+
+    :raises: CalledProcessError if ceph call fails
+    """
+    if ceph_version() >= '12.0.0':
+        cmd = ['ceph', '--id', client, 'osd', 'pool',
+               'application', 'enable', pool, name]
+        check_call(cmd)
+
+
 def create_pool(service, name, replicas=3, pg_num=None):
     """Create a new RADOS pool."""
     if pool_exists(service, name):

hooks/charmhelpers/contrib/storage/linux/lvm.py

@@ -151,3 +151,32 @@ def extend_logical_volume_by_device(lv_name, block_device):
     '''
     cmd = ['lvextend', lv_name, block_device]
     check_call(cmd)
+
+
+def create_logical_volume(lv_name, volume_group, size=None):
+    '''
+    Create a new logical volume in an existing volume group
+
+    :param lv_name: str: name of logical volume to be created.
+    :param volume_group: str: Name of volume group to use for the new volume.
+    :param size: str: Size of logical volume to create (100% if not supplied)
+    :raises subprocess.CalledProcessError: in the event that the lvcreate fails.
+    '''
+    if size:
+        check_call([
+            'lvcreate',
+            '--yes',
+            '-L',
+            '{}'.format(size),
+            '-n', lv_name, volume_group
+        ])
+    # create the lv with all the space available, this is needed because the
+    # system call is different for LVM
+    else:
+        check_call([
+            'lvcreate',
+            '--yes',
+            '-l',
+            '100%FREE',
+            '-n', lv_name, volume_group
+        ])

hooks/charmhelpers/contrib/storage/linux/utils.py

@@ -67,3 +67,19 @@ def is_device_mounted(device):
     except Exception:
         return False
     return bool(re.search(r'MOUNTPOINT=".+"', out))
+
+
+def mkfs_xfs(device, force=False):
+    """Format device with XFS filesystem.
+
+    By default this should fail if the device already has a filesystem on it.
+    :param device: Full path to device to format
+    :ptype device: tr
+    :param force: Force operation
+    :ptype: force: boolean"""
+    cmd = ['mkfs.xfs']
+    if force:
+        cmd.append("-f")
+
+    cmd += ['-i', 'size=1024', device]
+    check_call(cmd)

hooks/charmhelpers/core/hookenv.py

@@ -27,6 +27,7 @@ import glob
 import os
 import json
 import yaml
+import re
 import subprocess
 import sys
 import errno
@@ -67,7 +68,7 @@ def cached(func):
     @wraps(func)
     def wrapper(*args, **kwargs):
         global cache
-        key = str((func, args, kwargs))
+        key = json.dumps((func, args, kwargs), sort_keys=True, default=str)
         try:
             return cache[key]
         except KeyError:
@@ -289,7 +290,7 @@ class Config(dict):
         self.implicit_save = True
         self._prev_dict = None
         self.path = os.path.join(charm_dir(), Config.CONFIG_FILE_NAME)
-        if os.path.exists(self.path):
+        if os.path.exists(self.path) and os.stat(self.path).st_size:
             self.load_previous()
         atexit(self._implicit_save)
 
@@ -309,7 +310,11 @@ class Config(dict):
         """
         self.path = path or self.path
         with open(self.path) as f:
-            self._prev_dict = json.load(f)
+            try:
+                self._prev_dict = json.load(f)
+            except ValueError as e:
+                log('Unable to parse previous config data - {}'.format(str(e)),
+                    level=ERROR)
         for k, v in copy.deepcopy(self._prev_dict).items():
             if k not in self:
                 self[k] = v
@@ -353,22 +358,40 @@ class Config(dict):
             self.save()
 
 
-@cached
+_cache_config = None
+
+
 def config(scope=None):
-    """Juju charm configuration"""
+    """
-    config_cmd_line = ['config-get']
+    Get the juju charm configuration (scope==None) or individual key,
-    if scope is not None:
+    (scope=str).  The returned value is a Python data structure loaded as
-        config_cmd_line.append(scope)
+    JSON from the Juju config command.
-    else:
+
-        config_cmd_line.append('--all')
+    :param scope: If set, return the value for the specified key.
-    config_cmd_line.append('--format=json')
+    :type scope: Optional[str]
+    :returns: Either the whole config as a Config, or a key from it.
+    :rtype: Any
+    """
+    global _cache_config
+    config_cmd_line = ['config-get', '--all', '--format=json']
     try:
-        config_data = json.loads(
+        # JSON Decode Exception for Python3.5+
-            subprocess.check_output(config_cmd_line).decode('UTF-8'))
+        exc_json = json.decoder.JSONDecodeError
+    except AttributeError:
+        # JSON Decode Exception for Python2.7 through Python3.4
+        exc_json = ValueError
+    try:
+        if _cache_config is None:
+            config_data = json.loads(
+                subprocess.check_output(config_cmd_line).decode('UTF-8'))
+            _cache_config = Config(config_data)
         if scope is not None:
-            return config_data
+            return _cache_config.get(scope)
-        return Config(config_data)
+        return _cache_config
-    except ValueError:
+    except (exc_json, UnicodeDecodeError) as e:
+        log('Unable to parse output from config-get: config_cmd_line="{}" '
+            'message="{}"'
+            .format(config_cmd_line, str(e)), level=ERROR)
         return None
 
 
@@ -1043,7 +1066,6 @@ def juju_version():
                                    universal_newlines=True).strip()
 
 
-@cached
 def has_juju_version(minimum_version):
     """Return True if the Juju version is at least the provided version"""
     return LooseVersion(juju_version()) >= LooseVersion(minimum_version)
@@ -1103,6 +1125,8 @@ def _run_atexit():
 @translate_exc(from_exc=OSError, to_exc=NotImplementedError)
 def network_get_primary_address(binding):
     '''
+    Deprecated since Juju 2.3; use network_get()
+
     Retrieve the primary network address for a named binding
 
     :param binding: string. The name of a relation of extra-binding
@@ -1123,7 +1147,6 @@ def network_get_primary_address(binding):
     return response
 
 
-@translate_exc(from_exc=OSError, to_exc=NotImplementedError)
 def network_get(endpoint, relation_id=None):
     """
     Retrieve the network details for a relation endpoint
@@ -1131,24 +1154,20 @@ def network_get(endpoint, relation_id=None):
     :param endpoint: string. The name of a relation endpoint
     :param relation_id: int. The ID of the relation for the current context.
     :return: dict. The loaded YAML output of the network-get query.
-    :raise: NotImplementedError if run on Juju < 2.1
+    :raise: NotImplementedError if request not supported by the Juju version.
     """
+    if not has_juju_version('2.2'):
+        raise NotImplementedError(juju_version())  # earlier versions require --primary-address
+    if relation_id and not has_juju_version('2.3'):
+        raise NotImplementedError  # 2.3 added the -r option
+
     cmd = ['network-get', endpoint, '--format', 'yaml']
     if relation_id:
         cmd.append('-r')
         cmd.append(relation_id)
-    try:
+    response = subprocess.check_output(
-        response = subprocess.check_output(
+        cmd,
-            cmd,
+        stderr=subprocess.STDOUT).decode('UTF-8').strip()
-            stderr=subprocess.STDOUT).decode('UTF-8').strip()
-    except CalledProcessError as e:
-        # Early versions of Juju 2.0.x required the --primary-address argument.
-        # We catch that condition here and raise NotImplementedError since
-        # the requested semantics are not available - the caller can then
-        # use the network_get_primary_address() method instead.
-        if '--primary-address is currently required' in e.output.decode('UTF-8'):
-            raise NotImplementedError
-        raise
     return yaml.safe_load(response)
 
 
@@ -1204,9 +1223,23 @@ def iter_units_for_relation_name(relation_name):
 
 def ingress_address(rid=None, unit=None):
     """
-    Retrieve the ingress-address from a relation when available. Otherwise,
+    Retrieve the ingress-address from a relation when available.
-    return the private-address. This function is to be used on the consuming
+    Otherwise, return the private-address.
-    side of the relation.
+
+    When used on the consuming side of the relation (unit is a remote
+    unit), the ingress-address is the IP address that this unit needs
+    to use to reach the provided service on the remote unit.
+
+    When used on the providing side of the relation (unit == local_unit()),
+    the ingress-address is the IP address that is advertised to remote
+    units on this relation. Remote units need to use this address to
+    reach the local provided service on this unit.
+
+    Note that charms may document some other method to use in
+    preference to the ingress_address(), such as an address provided
+    on a different relation attribute or a service discovery mechanism.
+    This allows charms to redirect inbound connections to their peers
+    or different applications such as load balancers.
 
     Usage:
     addresses = [ingress_address(rid=u.rid, unit=u.unit)
@@ -1220,3 +1253,40 @@ def ingress_address(rid=None, unit=None):
     settings = relation_get(rid=rid, unit=unit)
     return (settings.get('ingress-address') or
             settings.get('private-address'))
+
+
+def egress_subnets(rid=None, unit=None):
+    """
+    Retrieve the egress-subnets from a relation.
+
+    This function is to be used on the providing side of the
+    relation, and provides the ranges of addresses that client
+    connections may come from. The result is uninteresting on
+    the consuming side of a relation (unit == local_unit()).
+
+    Returns a stable list of subnets in CIDR format.
+    eg. ['192.168.1.0/24', '2001::F00F/128']
+
+    If egress-subnets is not available, falls back to using the published
+    ingress-address, or finally private-address.
+
+    :param rid: string relation id
+    :param unit: string unit name
+    :side effect: calls relation_get
+    :return: list of subnets in CIDR format. eg. ['192.168.1.0/24', '2001::F00F/128']
+    """
+    def _to_range(addr):
+        if re.search(r'^(?:\d{1,3}\.){3}\d{1,3}$', addr) is not None:
+            addr += '/32'
+        elif ':' in addr and '/' not in addr:  # IPv6
+            addr += '/128'
+        return addr
+
+    settings = relation_get(rid=rid, unit=unit)
+    if 'egress-subnets' in settings:
+        return [n.strip() for n in settings['egress-subnets'].split(',') if n.strip()]
+    if 'ingress-address' in settings:
+        return [_to_range(settings['ingress-address'])]
+    if 'private-address' in settings:
+        return [_to_range(settings['private-address'])]
+    return []  # Should never happen

hooks/charmhelpers/core/host.py

@@ -993,7 +993,7 @@ def updatedb(updatedb_text, new_path):
     return output
 
 
-def modulo_distribution(modulo=3, wait=30):
+def modulo_distribution(modulo=3, wait=30, non_zero_wait=False):
     """ Modulo distribution
 
     This helper uses the unit number, a modulo value and a constant wait time
@@ -1015,7 +1015,14 @@ def modulo_distribution(modulo=3, wait=30):
 
     @param modulo: int The modulo number creates the group distribution
     @param wait: int The constant time wait value
+    @param non_zero_wait: boolean Override unit % modulo == 0,
+                          return modulo * wait. Used to avoid collisions with
+                          leader nodes which are often given priority.
     @return: int Calculated time to wait for unit operation
     """
     unit_number = int(local_unit().split('/')[1])
-    return (unit_number % modulo) * wait
+    calculated_wait_time = (unit_number % modulo) * wait
+    if non_zero_wait and calculated_wait_time == 0:
+        return modulo * wait
+    else:
+        return calculated_wait_time

hooks/charmhelpers/core/services/base.py

@@ -307,23 +307,34 @@ class PortManagerCallback(ManagerCallback):
     """
     def __call__(self, manager, service_name, event_name):
         service = manager.get_service(service_name)
-        new_ports = service.get('ports', [])
+        # turn this generator into a list,
+        # as we'll be going over it multiple times
+        new_ports = list(service.get('ports', []))
         port_file = os.path.join(hookenv.charm_dir(), '.{}.ports'.format(service_name))
         if os.path.exists(port_file):
             with open(port_file) as fp:
                 old_ports = fp.read().split(',')
             for old_port in old_ports:
-                if bool(old_port):
+                if bool(old_port) and not self.ports_contains(old_port, new_ports):
-                    old_port = int(old_port)
+                    hookenv.close_port(old_port)
-                    if old_port not in new_ports:
-                        hookenv.close_port(old_port)
         with open(port_file, 'w') as fp:
             fp.write(','.join(str(port) for port in new_ports))
         for port in new_ports:
+            # A port is either a number or 'ICMP'
+            protocol = 'TCP'
+            if str(port).upper() == 'ICMP':
+                protocol = 'ICMP'
             if event_name == 'start':
-                hookenv.open_port(port)
+                hookenv.open_port(port, protocol)
             elif event_name == 'stop':
-                hookenv.close_port(port)
+                hookenv.close_port(port, protocol)
+
+    def ports_contains(self, port, ports):
+        if not bool(port):
+            return False
+        if str(port).upper() != 'ICMP':
+            port = int(port)
+        return port in ports
 
 
 def service_stop(service_name):

hooks/charmhelpers/core/sysctl.py

@@ -31,18 +31,22 @@ __author__ = 'Jorge Niedbalski R. <jorge.niedbalski@canonical.com>'
 def create(sysctl_dict, sysctl_file):
     """Creates a sysctl.conf file from a YAML associative array
 
-    :param sysctl_dict: a YAML-formatted string of sysctl options eg "{ 'kernel.max_pid': 1337 }"
+    :param sysctl_dict: a dict or YAML-formatted string of sysctl
+                        options eg "{ 'kernel.max_pid': 1337 }"
     :type sysctl_dict: str
     :param sysctl_file: path to the sysctl file to be saved
     :type sysctl_file: str or unicode
     :returns: None
     """
-    try:
+    if type(sysctl_dict) is not dict:
-        sysctl_dict_parsed = yaml.safe_load(sysctl_dict)
+        try:
-    except yaml.YAMLError:
+            sysctl_dict_parsed = yaml.safe_load(sysctl_dict)
-        log("Error parsing YAML sysctl_dict: {}".format(sysctl_dict),
+        except yaml.YAMLError:
-            level=ERROR)
+            log("Error parsing YAML sysctl_dict: {}".format(sysctl_dict),
-        return
+                level=ERROR)
+            return
+    else:
+        sysctl_dict_parsed = sysctl_dict
 
     with open(sysctl_file, "w") as fd:
         for key, value in sysctl_dict_parsed.items():

hooks/charmhelpers/core/unitdata.py

@@ -166,6 +166,10 @@ class Storage(object):
 
     To support dicts, lists, integer, floats, and booleans values
     are automatically json encoded/decoded.
+
+    Note: to facilitate unit testing, ':memory:' can be passed as the
+    path parameter which causes sqlite3 to only build the db in memory.
+    This should only be used for testing purposes.
     """
     def __init__(self, path=None):
         self.db_path = path
@@ -175,8 +179,9 @@ class Storage(object):
             else:
                 self.db_path = os.path.join(
                     os.environ.get('CHARM_DIR', ''), '.unit-state.db')
-        with open(self.db_path, 'a') as f:
+        if self.db_path != ':memory:':
-            os.fchmod(f.fileno(), 0o600)
+            with open(self.db_path, 'a') as f:
+                os.fchmod(f.fileno(), 0o600)
         self.conn = sqlite3.connect('%s' % self.db_path)
         self.cursor = self.conn.cursor()
         self.revision = None

hooks/charmhelpers/fetch/ubuntu.py

@@ -44,6 +44,7 @@ ARCH_TO_PROPOSED_POCKET = {
     'x86_64': PROPOSED_POCKET,
     'ppc64le': PROPOSED_PORTS_POCKET,
     'aarch64': PROPOSED_PORTS_POCKET,
+    's390x': PROPOSED_PORTS_POCKET,
 }
 CLOUD_ARCHIVE_URL = "http://ubuntu-cloud.archive.canonical.com/ubuntu"
 CLOUD_ARCHIVE_KEY_ID = '5EDB1B62EC4926EA'

tests/charmhelpers/contrib/openstack/amulet/deployment.py

@@ -21,6 +21,9 @@ from collections import OrderedDict
 from charmhelpers.contrib.amulet.deployment import (
     AmuletDeployment
 )
+from charmhelpers.contrib.openstack.amulet.utils import (
+    OPENSTACK_RELEASES_PAIRS
+)
 
 DEBUG = logging.DEBUG
 ERROR = logging.ERROR
@@ -271,11 +274,8 @@ class OpenStackAmuletDeployment(AmuletDeployment):
            release.
            """
         # Must be ordered by OpenStack release (not by Ubuntu release):
-        (self.trusty_icehouse, self.trusty_kilo, self.trusty_liberty,
+        for i, os_pair in enumerate(OPENSTACK_RELEASES_PAIRS):
-         self.trusty_mitaka, self.xenial_mitaka, self.xenial_newton,
+            setattr(self, os_pair, i)
-         self.yakkety_newton, self.xenial_ocata, self.zesty_ocata,
-         self.xenial_pike, self.artful_pike, self.xenial_queens,
-         self.bionic_queens,) = range(13)
 
         releases = {
             ('trusty', None): self.trusty_icehouse,

tests/charmhelpers/contrib/openstack/amulet/utils.py

@@ -50,6 +50,13 @@ ERROR = logging.ERROR
 
 NOVA_CLIENT_VERSION = "2"
 
+OPENSTACK_RELEASES_PAIRS = [
+    'trusty_icehouse', 'trusty_kilo', 'trusty_liberty',
+    'trusty_mitaka', 'xenial_mitaka', 'xenial_newton',
+    'yakkety_newton', 'xenial_ocata', 'zesty_ocata',
+    'xenial_pike', 'artful_pike', 'xenial_queens',
+    'bionic_queens']
+
 
 class OpenStackAmuletUtils(AmuletUtils):
     """OpenStack amulet utilities.
@@ -63,7 +70,34 @@ class OpenStackAmuletUtils(AmuletUtils):
         super(OpenStackAmuletUtils, self).__init__(log_level)
 
     def validate_endpoint_data(self, endpoints, admin_port, internal_port,
-                               public_port, expected):
+                               public_port, expected, openstack_release=None):
+        """Validate endpoint data. Pick the correct validator based on
+           OpenStack release. Expected data should be in the v2 format:
+           {
+               'id': id,
+               'region': region,
+               'adminurl': adminurl,
+               'internalurl': internalurl,
+               'publicurl': publicurl,
+               'service_id': service_id}
+
+           """
+        validation_function = self.validate_v2_endpoint_data
+        xenial_queens = OPENSTACK_RELEASES_PAIRS.index('xenial_queens')
+        if openstack_release and openstack_release >= xenial_queens:
+                validation_function = self.validate_v3_endpoint_data
+                expected = {
+                    'id': expected['id'],
+                    'region': expected['region'],
+                    'region_id': 'RegionOne',
+                    'url': self.valid_url,
+                    'interface': self.not_null,
+                    'service_id': expected['service_id']}
+        return validation_function(endpoints, admin_port, internal_port,
+                                   public_port, expected)
+
+    def validate_v2_endpoint_data(self, endpoints, admin_port, internal_port,
+                                  public_port, expected):
         """Validate endpoint data.
 
            Validate actual endpoint data vs expected endpoint data. The ports
@@ -141,7 +175,86 @@ class OpenStackAmuletUtils(AmuletUtils):
         if len(found) != expected_num_eps:
             return 'Unexpected number of endpoints found'
 
-    def validate_svc_catalog_endpoint_data(self, expected, actual):
+    def convert_svc_catalog_endpoint_data_to_v3(self, ep_data):
+        """Convert v2 endpoint data into v3.
+
+           {
+               'service_name1': [
+                   {
+                       'adminURL': adminURL,
+                       'id': id,
+                       'region': region.
+                       'publicURL': publicURL,
+                       'internalURL': internalURL
+                   }],
+               'service_name2': [
+                   {
+                       'adminURL': adminURL,
+                       'id': id,
+                       'region': region.
+                       'publicURL': publicURL,
+                       'internalURL': internalURL
+                   }],
+           }
+          """
+        self.log.warn("Endpoint ID and Region ID validation is limited to not "
+                      "null checks after v2 to v3 conversion")
+        for svc in ep_data.keys():
+            assert len(ep_data[svc]) == 1, "Unknown data format"
+            svc_ep_data = ep_data[svc][0]
+            ep_data[svc] = [
+                {
+                    'url': svc_ep_data['adminURL'],
+                    'interface': 'admin',
+                    'region': svc_ep_data['region'],
+                    'region_id': self.not_null,
+                    'id': self.not_null},
+                {
+                    'url': svc_ep_data['publicURL'],
+                    'interface': 'public',
+                    'region': svc_ep_data['region'],
+                    'region_id': self.not_null,
+                    'id': self.not_null},
+                {
+                    'url': svc_ep_data['internalURL'],
+                    'interface': 'internal',
+                    'region': svc_ep_data['region'],
+                    'region_id': self.not_null,
+                    'id': self.not_null}]
+        return ep_data
+
+    def validate_svc_catalog_endpoint_data(self, expected, actual,
+                                           openstack_release=None):
+        """Validate service catalog endpoint data. Pick the correct validator
+           for the OpenStack version. Expected data should be in the v2 format:
+           {
+               'service_name1': [
+                   {
+                       'adminURL': adminURL,
+                       'id': id,
+                       'region': region.
+                       'publicURL': publicURL,
+                       'internalURL': internalURL
+                   }],
+               'service_name2': [
+                   {
+                       'adminURL': adminURL,
+                       'id': id,
+                       'region': region.
+                       'publicURL': publicURL,
+                       'internalURL': internalURL
+                   }],
+           }
+
+           """
+        validation_function = self.validate_v2_svc_catalog_endpoint_data
+        xenial_queens = OPENSTACK_RELEASES_PAIRS.index('xenial_queens')
+        if openstack_release and openstack_release >= xenial_queens:
+            validation_function = self.validate_v3_svc_catalog_endpoint_data
+            expected = self.convert_svc_catalog_endpoint_data_to_v3(expected)
+        return validation_function(expected, actual)
+
+    def validate_v2_svc_catalog_endpoint_data(self, expected, actual):
         """Validate service catalog endpoint data.
 
            Validate a list of actual service catalog endpoints vs a list of
@@ -328,7 +441,7 @@ class OpenStackAmuletUtils(AmuletUtils):
             if rel.get('api_version') != str(api_version):
                 raise Exception("api_version not propagated through relation"
                                 " data yet ('{}' != '{}')."
-                                "".format(rel['api_version'], api_version))
+                                "".format(rel.get('api_version'), api_version))
 
     def keystone_configure_api_version(self, sentry_relation_pairs, deployment,
                                        api_version):
@@ -350,16 +463,13 @@ class OpenStackAmuletUtils(AmuletUtils):
         deployment._auto_wait_for_status()
         self.keystone_wait_for_propagation(sentry_relation_pairs, api_version)
 
-    def authenticate_cinder_admin(self, keystone_sentry, username,
+    def authenticate_cinder_admin(self, keystone, api_version=2):
-                                  password, tenant, api_version=2):
         """Authenticates admin user with cinder."""
-        # NOTE(beisner): cinder python client doesn't accept tokens.
+        self.log.debug('Authenticating cinder admin...')
-        keystone_ip = keystone_sentry.info['public-address']
-        ept = "http://{}:5000/v2.0".format(keystone_ip.strip().decode('utf-8'))
         _clients = {
             1: cinder_client.Client,
             2: cinder_clientv2.Client}
-        return _clients[api_version](username, password, tenant, ept)
+        return _clients[api_version](session=keystone.session)
 
     def authenticate_keystone(self, keystone_ip, username, password,
                               api_version=False, admin_port=False,
@@ -367,13 +477,36 @@ class OpenStackAmuletUtils(AmuletUtils):
                               project_domain_name=None, project_name=None):
         """Authenticate with Keystone"""
         self.log.debug('Authenticating with keystone...')
-        port = 5000
+        if not api_version:
-        if admin_port:
+            api_version = 2
-            port = 35357
+        sess, auth = self.get_keystone_session(
-        base_ep = "http://{}:{}".format(keystone_ip.strip().decode('utf-8'),
+            keystone_ip=keystone_ip,
-                                        port)
+            username=username,
-        if not api_version or api_version == 2:
+            password=password,
-            ep = base_ep + "/v2.0"
+            api_version=api_version,
+            admin_port=admin_port,
+            user_domain_name=user_domain_name,
+            domain_name=domain_name,
+            project_domain_name=project_domain_name,
+            project_name=project_name
+        )
+        if api_version == 2:
+            client = keystone_client.Client(session=sess)
+        else:
+            client = keystone_client_v3.Client(session=sess)
+        # This populates the client.service_catalog
+        client.auth_ref = auth.get_access(sess)
+        return client
+
+    def get_keystone_session(self, keystone_ip, username, password,
+                             api_version=False, admin_port=False,
+                             user_domain_name=None, domain_name=None,
+                             project_domain_name=None, project_name=None):
+        """Return a keystone session object"""
+        ep = self.get_keystone_endpoint(keystone_ip,
+                                        api_version=api_version,
+                                        admin_port=admin_port)
+        if api_version == 2:
             auth = v2.Password(
                 username=username,
                 password=password,
@@ -381,12 +514,7 @@ class OpenStackAmuletUtils(AmuletUtils):
                 auth_url=ep
             )
             sess = keystone_session.Session(auth=auth)
-            client = keystone_client.Client(session=sess)
-            # This populates the client.service_catalog
-            client.auth_ref = auth.get_access(sess)
-            return client
         else:
-            ep = base_ep + "/v3"
             auth = v3.Password(
                 user_domain_name=user_domain_name,
                 username=username,
@@ -397,10 +525,57 @@ class OpenStackAmuletUtils(AmuletUtils):
                 auth_url=ep
             )
             sess = keystone_session.Session(auth=auth)
-            client = keystone_client_v3.Client(session=sess)
+        return (sess, auth)
-            # This populates the client.service_catalog
+
-            client.auth_ref = auth.get_access(sess)
+    def get_keystone_endpoint(self, keystone_ip, api_version=None,
-            return client
+                              admin_port=False):
+        """Return keystone endpoint"""
+        port = 5000
+        if admin_port:
+            port = 35357
+        base_ep = "http://{}:{}".format(keystone_ip.strip().decode('utf-8'),
+                                        port)
+        if api_version == 2:
+            ep = base_ep + "/v2.0"
+        else:
+            ep = base_ep + "/v3"
+        return ep
+
+    def get_default_keystone_session(self, keystone_sentry,
+                                     openstack_release=None):
+        """Return a keystone session object and client object assuming standard
+           default settings
+
+           Example call in amulet tests:
+               self.keystone_session, self.keystone = u.get_default_keystone_session(
+                   self.keystone_sentry,
+                   openstack_release=self._get_openstack_release())
+
+           The session can then be used to auth other clients:
+               neutronclient.Client(session=session)
+               aodh_client.Client(session=session)
+               eyc
+        """
+        self.log.debug('Authenticating keystone admin...')
+        api_version = 2
+        client_class = keystone_client.Client
+        # 11 => xenial_queens
+        if openstack_release and openstack_release >= 11:
+            api_version = 3
+            client_class = keystone_client_v3.Client
+        keystone_ip = keystone_sentry.info['public-address']
+        session, auth = self.get_keystone_session(
+            keystone_ip,
+            api_version=api_version,
+            username='admin',
+            password='openstack',
+            project_name='admin',
+            user_domain_name='admin_domain',
+            project_domain_name='admin_domain')
+        client = client_class(session=session)
+        # This populates the client.service_catalog
+        client.auth_ref = auth.get_access(session)
+        return session, client
 
     def authenticate_keystone_admin(self, keystone_sentry, user, password,
                                     tenant=None, api_version=None,

tests/charmhelpers/core/hookenv.py

@@ -27,6 +27,7 @@ import glob
 import os
 import json
 import yaml
+import re
 import subprocess
 import sys
 import errno
@@ -67,7 +68,7 @@ def cached(func):
     @wraps(func)
     def wrapper(*args, **kwargs):
         global cache
-        key = str((func, args, kwargs))
+        key = json.dumps((func, args, kwargs), sort_keys=True, default=str)
         try:
             return cache[key]
         except KeyError:
@@ -289,7 +290,7 @@ class Config(dict):
         self.implicit_save = True
         self._prev_dict = None
         self.path = os.path.join(charm_dir(), Config.CONFIG_FILE_NAME)
-        if os.path.exists(self.path):
+        if os.path.exists(self.path) and os.stat(self.path).st_size:
             self.load_previous()
         atexit(self._implicit_save)
 
@@ -309,7 +310,11 @@ class Config(dict):
         """
         self.path = path or self.path
         with open(self.path) as f:
-            self._prev_dict = json.load(f)
+            try:
+                self._prev_dict = json.load(f)
+            except ValueError as e:
+                log('Unable to parse previous config data - {}'.format(str(e)),
+                    level=ERROR)
         for k, v in copy.deepcopy(self._prev_dict).items():
             if k not in self:
                 self[k] = v
@@ -353,22 +358,40 @@ class Config(dict):
             self.save()
 
 
-@cached
+_cache_config = None
+
+
 def config(scope=None):
-    """Juju charm configuration"""
+    """
-    config_cmd_line = ['config-get']
+    Get the juju charm configuration (scope==None) or individual key,
-    if scope is not None:
+    (scope=str).  The returned value is a Python data structure loaded as
-        config_cmd_line.append(scope)
+    JSON from the Juju config command.
-    else:
+
-        config_cmd_line.append('--all')
+    :param scope: If set, return the value for the specified key.
-    config_cmd_line.append('--format=json')
+    :type scope: Optional[str]
+    :returns: Either the whole config as a Config, or a key from it.
+    :rtype: Any
+    """
+    global _cache_config
+    config_cmd_line = ['config-get', '--all', '--format=json']
     try:
-        config_data = json.loads(
+        # JSON Decode Exception for Python3.5+
-            subprocess.check_output(config_cmd_line).decode('UTF-8'))
+        exc_json = json.decoder.JSONDecodeError
+    except AttributeError:
+        # JSON Decode Exception for Python2.7 through Python3.4
+        exc_json = ValueError
+    try:
+        if _cache_config is None:
+            config_data = json.loads(
+                subprocess.check_output(config_cmd_line).decode('UTF-8'))
+            _cache_config = Config(config_data)
         if scope is not None:
-            return config_data
+            return _cache_config.get(scope)
-        return Config(config_data)
+        return _cache_config
-    except ValueError:
+    except (exc_json, UnicodeDecodeError) as e:
+        log('Unable to parse output from config-get: config_cmd_line="{}" '
+            'message="{}"'
+            .format(config_cmd_line, str(e)), level=ERROR)
         return None
 
 
@@ -1043,7 +1066,6 @@ def juju_version():
                                    universal_newlines=True).strip()
 
 
-@cached
 def has_juju_version(minimum_version):
     """Return True if the Juju version is at least the provided version"""
     return LooseVersion(juju_version()) >= LooseVersion(minimum_version)
@@ -1103,6 +1125,8 @@ def _run_atexit():
 @translate_exc(from_exc=OSError, to_exc=NotImplementedError)
 def network_get_primary_address(binding):
     '''
+    Deprecated since Juju 2.3; use network_get()
+
     Retrieve the primary network address for a named binding
 
     :param binding: string. The name of a relation of extra-binding
@@ -1123,7 +1147,6 @@ def network_get_primary_address(binding):
     return response
 
 
-@translate_exc(from_exc=OSError, to_exc=NotImplementedError)
 def network_get(endpoint, relation_id=None):
     """
     Retrieve the network details for a relation endpoint
@@ -1131,24 +1154,20 @@ def network_get(endpoint, relation_id=None):
     :param endpoint: string. The name of a relation endpoint
     :param relation_id: int. The ID of the relation for the current context.
     :return: dict. The loaded YAML output of the network-get query.
-    :raise: NotImplementedError if run on Juju < 2.1
+    :raise: NotImplementedError if request not supported by the Juju version.
     """
+    if not has_juju_version('2.2'):
+        raise NotImplementedError(juju_version())  # earlier versions require --primary-address
+    if relation_id and not has_juju_version('2.3'):
+        raise NotImplementedError  # 2.3 added the -r option
+
     cmd = ['network-get', endpoint, '--format', 'yaml']
     if relation_id:
         cmd.append('-r')
         cmd.append(relation_id)
-    try:
+    response = subprocess.check_output(
-        response = subprocess.check_output(
+        cmd,
-            cmd,
+        stderr=subprocess.STDOUT).decode('UTF-8').strip()
-            stderr=subprocess.STDOUT).decode('UTF-8').strip()
-    except CalledProcessError as e:
-        # Early versions of Juju 2.0.x required the --primary-address argument.
-        # We catch that condition here and raise NotImplementedError since
-        # the requested semantics are not available - the caller can then
-        # use the network_get_primary_address() method instead.
-        if '--primary-address is currently required' in e.output.decode('UTF-8'):
-            raise NotImplementedError
-        raise
     return yaml.safe_load(response)
 
 
@@ -1204,9 +1223,23 @@ def iter_units_for_relation_name(relation_name):
 
 def ingress_address(rid=None, unit=None):
     """
-    Retrieve the ingress-address from a relation when available. Otherwise,
+    Retrieve the ingress-address from a relation when available.
-    return the private-address. This function is to be used on the consuming
+    Otherwise, return the private-address.
-    side of the relation.
+
+    When used on the consuming side of the relation (unit is a remote
+    unit), the ingress-address is the IP address that this unit needs
+    to use to reach the provided service on the remote unit.
+
+    When used on the providing side of the relation (unit == local_unit()),
+    the ingress-address is the IP address that is advertised to remote
+    units on this relation. Remote units need to use this address to
+    reach the local provided service on this unit.
+
+    Note that charms may document some other method to use in
+    preference to the ingress_address(), such as an address provided
+    on a different relation attribute or a service discovery mechanism.
+    This allows charms to redirect inbound connections to their peers
+    or different applications such as load balancers.
 
     Usage:
     addresses = [ingress_address(rid=u.rid, unit=u.unit)
@@ -1220,3 +1253,40 @@ def ingress_address(rid=None, unit=None):
     settings = relation_get(rid=rid, unit=unit)
     return (settings.get('ingress-address') or
             settings.get('private-address'))
+
+
+def egress_subnets(rid=None, unit=None):
+    """
+    Retrieve the egress-subnets from a relation.
+
+    This function is to be used on the providing side of the
+    relation, and provides the ranges of addresses that client
+    connections may come from. The result is uninteresting on
+    the consuming side of a relation (unit == local_unit()).
+
+    Returns a stable list of subnets in CIDR format.
+    eg. ['192.168.1.0/24', '2001::F00F/128']
+
+    If egress-subnets is not available, falls back to using the published
+    ingress-address, or finally private-address.
+
+    :param rid: string relation id
+    :param unit: string unit name
+    :side effect: calls relation_get
+    :return: list of subnets in CIDR format. eg. ['192.168.1.0/24', '2001::F00F/128']
+    """
+    def _to_range(addr):
+        if re.search(r'^(?:\d{1,3}\.){3}\d{1,3}$', addr) is not None:
+            addr += '/32'
+        elif ':' in addr and '/' not in addr:  # IPv6
+            addr += '/128'
+        return addr
+
+    settings = relation_get(rid=rid, unit=unit)
+    if 'egress-subnets' in settings:
+        return [n.strip() for n in settings['egress-subnets'].split(',') if n.strip()]
+    if 'ingress-address' in settings:
+        return [_to_range(settings['ingress-address'])]
+    if 'private-address' in settings:
+        return [_to_range(settings['private-address'])]
+    return []  # Should never happen

tests/charmhelpers/core/host.py

@@ -993,7 +993,7 @@ def updatedb(updatedb_text, new_path):
     return output
 
 
-def modulo_distribution(modulo=3, wait=30):
+def modulo_distribution(modulo=3, wait=30, non_zero_wait=False):
     """ Modulo distribution
 
     This helper uses the unit number, a modulo value and a constant wait time
@@ -1015,7 +1015,14 @@ def modulo_distribution(modulo=3, wait=30):
 
     @param modulo: int The modulo number creates the group distribution
     @param wait: int The constant time wait value
+    @param non_zero_wait: boolean Override unit % modulo == 0,
+                          return modulo * wait. Used to avoid collisions with
+                          leader nodes which are often given priority.
     @return: int Calculated time to wait for unit operation
     """
     unit_number = int(local_unit().split('/')[1])
-    return (unit_number % modulo) * wait
+    calculated_wait_time = (unit_number % modulo) * wait
+    if non_zero_wait and calculated_wait_time == 0:
+        return modulo * wait
+    else:
+        return calculated_wait_time

tests/charmhelpers/core/services/base.py

@@ -307,23 +307,34 @@ class PortManagerCallback(ManagerCallback):
     """
     def __call__(self, manager, service_name, event_name):
         service = manager.get_service(service_name)
-        new_ports = service.get('ports', [])
+        # turn this generator into a list,
+        # as we'll be going over it multiple times
+        new_ports = list(service.get('ports', []))
         port_file = os.path.join(hookenv.charm_dir(), '.{}.ports'.format(service_name))
         if os.path.exists(port_file):
             with open(port_file) as fp:
                 old_ports = fp.read().split(',')
             for old_port in old_ports:
-                if bool(old_port):
+                if bool(old_port) and not self.ports_contains(old_port, new_ports):
-                    old_port = int(old_port)
+                    hookenv.close_port(old_port)
-                    if old_port not in new_ports:
-                        hookenv.close_port(old_port)
         with open(port_file, 'w') as fp:
             fp.write(','.join(str(port) for port in new_ports))
         for port in new_ports:
+            # A port is either a number or 'ICMP'
+            protocol = 'TCP'
+            if str(port).upper() == 'ICMP':
+                protocol = 'ICMP'
             if event_name == 'start':
-                hookenv.open_port(port)
+                hookenv.open_port(port, protocol)
             elif event_name == 'stop':
-                hookenv.close_port(port)
+                hookenv.close_port(port, protocol)
+
+    def ports_contains(self, port, ports):
+        if not bool(port):
+            return False
+        if str(port).upper() != 'ICMP':
+            port = int(port)
+        return port in ports
 
 
 def service_stop(service_name):

tests/charmhelpers/core/sysctl.py

@@ -31,18 +31,22 @@ __author__ = 'Jorge Niedbalski R. <jorge.niedbalski@canonical.com>'
 def create(sysctl_dict, sysctl_file):
     """Creates a sysctl.conf file from a YAML associative array
 
-    :param sysctl_dict: a YAML-formatted string of sysctl options eg "{ 'kernel.max_pid': 1337 }"
+    :param sysctl_dict: a dict or YAML-formatted string of sysctl
+                        options eg "{ 'kernel.max_pid': 1337 }"
     :type sysctl_dict: str
     :param sysctl_file: path to the sysctl file to be saved
     :type sysctl_file: str or unicode
     :returns: None
     """
-    try:
+    if type(sysctl_dict) is not dict:
-        sysctl_dict_parsed = yaml.safe_load(sysctl_dict)
+        try:
-    except yaml.YAMLError:
+            sysctl_dict_parsed = yaml.safe_load(sysctl_dict)
-        log("Error parsing YAML sysctl_dict: {}".format(sysctl_dict),
+        except yaml.YAMLError:
-            level=ERROR)
+            log("Error parsing YAML sysctl_dict: {}".format(sysctl_dict),
-        return
+                level=ERROR)
+            return
+    else:
+        sysctl_dict_parsed = sysctl_dict
 
     with open(sysctl_file, "w") as fd:
         for key, value in sysctl_dict_parsed.items():

tests/charmhelpers/core/unitdata.py

@@ -166,6 +166,10 @@ class Storage(object):
 
     To support dicts, lists, integer, floats, and booleans values
     are automatically json encoded/decoded.
+
+    Note: to facilitate unit testing, ':memory:' can be passed as the
+    path parameter which causes sqlite3 to only build the db in memory.
+    This should only be used for testing purposes.
     """
     def __init__(self, path=None):
         self.db_path = path
@@ -175,8 +179,9 @@ class Storage(object):
             else:
                 self.db_path = os.path.join(
                     os.environ.get('CHARM_DIR', ''), '.unit-state.db')
-        with open(self.db_path, 'a') as f:
+        if self.db_path != ':memory:':
-            os.fchmod(f.fileno(), 0o600)
+            with open(self.db_path, 'a') as f:
+                os.fchmod(f.fileno(), 0o600)
         self.conn = sqlite3.connect('%s' % self.db_path)
         self.cursor = self.conn.cursor()
         self.revision = None

tox.ini

@@ -61,7 +61,7 @@ basepython = python2.7
 deps = -r{toxinidir}/requirements.txt
        -r{toxinidir}/test-requirements.txt
 commands =
-    bundletester -vl DEBUG -r json -o func-results.json gate-basic-xenial-pike --no-destroy
+    bundletester -vl DEBUG -r json -o func-results.json gate-basic-bionic-queens --no-destroy
 
 [testenv:func27-dfs]
 # Charm Functional Test