Remove Sheepdog Driver

The Sheepdog project is no longer active and the driver was marked as
unsupported in the Train release. This completes the deprecation process
and removes the driver.

Change-Id: Ie94ae59a29473ca906c6df58a2681714049b16a1
Signed-off-by: Sean McGinnis <sean.mcginnis@gmail.com>
This commit is contained in:
Sean McGinnis 2019-12-19 07:25:08 -06:00
parent 416e60f579
commit 0835b0862e
No known key found for this signature in database
GPG Key ID: CE7EE4BFAF8D70C8
8 changed files with 9 additions and 2126 deletions

View File

@ -141,7 +141,6 @@ from cinder.volume.drivers import remotefs as cinder_volume_drivers_remotefs
from cinder.volume.drivers.san.hp import hpmsa_common as \ from cinder.volume.drivers.san.hp import hpmsa_common as \
cinder_volume_drivers_san_hp_hpmsacommon cinder_volume_drivers_san_hp_hpmsacommon
from cinder.volume.drivers.san import san as cinder_volume_drivers_san_san from cinder.volume.drivers.san import san as cinder_volume_drivers_san_san
from cinder.volume.drivers import sheepdog as cinder_volume_drivers_sheepdog
from cinder.volume.drivers import solidfire as cinder_volume_drivers_solidfire from cinder.volume.drivers import solidfire as cinder_volume_drivers_solidfire
from cinder.volume.drivers import storpool as cinder_volume_drivers_storpool from cinder.volume.drivers import storpool as cinder_volume_drivers_storpool
from cinder.volume.drivers.stx import common as \ from cinder.volume.drivers.stx import common as \
@ -346,7 +345,6 @@ def list_opts():
cinder_volume_drivers_san_hp_hpmsacommon.common_opts, cinder_volume_drivers_san_hp_hpmsacommon.common_opts,
cinder_volume_drivers_san_hp_hpmsacommon.iscsi_opts, cinder_volume_drivers_san_hp_hpmsacommon.iscsi_opts,
cinder_volume_drivers_san_san.san_opts, cinder_volume_drivers_san_san.san_opts,
cinder_volume_drivers_sheepdog.sheepdog_opts,
cinder_volume_drivers_solidfire.sf_opts, cinder_volume_drivers_solidfire.sf_opts,
cinder_volume_drivers_storpool.storpool_opts, cinder_volume_drivers_storpool.storpool_opts,
cinder_volume_drivers_stx_common.common_opts, cinder_volume_drivers_stx_common.common_opts,

File diff suppressed because it is too large Load Diff

View File

@ -1,661 +0,0 @@
# Copyright 2012 OpenStack Foundation
# Copyright (c) 2013 Zelin.io
# Copyright (C) 2015 Nippon Telegraph and Telephone Corporation.
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
"""
SheepDog Volume Driver.
"""
import errno
import eventlet
import io
import random
import re
from oslo_concurrency import processutils
from oslo_config import cfg
from oslo_log import log as logging
from oslo_utils import excutils
from oslo_utils import units
from cinder import exception
from cinder.i18n import _
from cinder.image import image_utils
from cinder import interface
from cinder import utils
from cinder.volume import configuration
from cinder.volume import driver
LOG = logging.getLogger(__name__)
sheepdog_opts = [
cfg.StrOpt('sheepdog_store_address',
default='127.0.0.1',
help=('IP address of sheep daemon.')),
cfg.PortOpt('sheepdog_store_port',
default=7000,
help=('Port of sheep daemon.'))
]
CONF = cfg.CONF
CONF.import_opt("image_conversion_dir", "cinder.image.image_utils")
CONF.register_opts(sheepdog_opts, group=configuration.SHARED_CONF_GROUP)
class SheepdogError(exception.VolumeBackendAPIException):
message = _("An error has occurred in SheepdogDriver. "
"(Reason: %(reason)s)")
class SheepdogCmdError(SheepdogError):
message = _("(Command: %(cmd)s) "
"(Return Code: %(exit_code)s) "
"(Stdout: %(stdout)s) "
"(Stderr: %(stderr)s)")
class SheepdogClient(object):
"""Sheepdog command executor."""
QEMU_SHEEPDOG_PREFIX = 'sheepdog:'
DOG_RESP_CONNECTION_ERROR = 'failed to connect to'
DOG_RESP_CLUSTER_RUNNING = 'Cluster status: running'
DOG_RESP_CLUSTER_NOT_FORMATTED = ('Cluster status: '
'Waiting for cluster to be formatted')
DOG_RESP_CLUSTER_WAITING = ('Cluster status: '
'Waiting for other nodes to join cluster')
DOG_RESP_VDI_ALREADY_EXISTS = ': VDI exists already'
DOG_RESP_VDI_NOT_FOUND = ': No VDI found'
DOG_RESP_VDI_SHRINK_NOT_SUPPORT = 'Shrinking VDIs is not implemented'
DOG_RESP_VDI_SIZE_TOO_LARGE = 'New VDI size is too large'
DOG_RESP_SNAPSHOT_VDI_NOT_FOUND = ': No VDI found'
DOG_RESP_SNAPSHOT_NOT_FOUND = ': Failed to find requested tag'
DOG_RESP_SNAPSHOT_EXISTED = 'tag (%(snapname)s) is existed'
QEMU_IMG_RESP_CONNECTION_ERROR = ('Failed to connect socket: '
'Connection refused')
QEMU_IMG_RESP_ALREADY_EXISTS = ': VDI exists already'
QEMU_IMG_RESP_SNAPSHOT_NOT_FOUND = 'Failed to find the requested tag'
QEMU_IMG_RESP_VDI_NOT_FOUND = 'No vdi found'
QEMU_IMG_RESP_SIZE_TOO_LARGE = 'An image is too large.'
def __init__(self, node_list, port):
self.node_list = node_list
self.port = port
def get_addr(self):
"""Get a random node in sheepdog cluster."""
return self.node_list[random.randint(0, len(self.node_list) - 1)]
def local_path(self, volume):
"""Return a sheepdog location path."""
return "sheepdog:%(addr)s:%(port)s:%(name)s" % {
'addr': self.get_addr(),
'port': self.port,
'name': volume['name']}
def _run_dog(self, command, subcommand, *params):
"""Execute dog command wrapper."""
addr = self.get_addr()
cmd = ('env', 'LC_ALL=C', 'LANG=C', 'dog', command, subcommand,
'-a', addr, '-p', self.port) + params
try:
(_stdout, _stderr) = utils.execute(*cmd)
if _stderr.startswith(self.DOG_RESP_CONNECTION_ERROR):
# NOTE(tishizaki)
# Dog command does not return error_code although
# dog command cannot connect to sheep process.
# That is a Sheepdog's bug.
# To avoid a Sheepdog's bug, now we need to check stderr.
# If Sheepdog has been fixed, this check logic is needed
# by old Sheepdog users.
reason = (_('Failed to connect to sheep daemon. '
'addr: %(addr)s, port: %(port)s'),
{'addr': addr, 'port': self.port})
raise SheepdogError(reason=reason)
return (_stdout, _stderr)
except OSError as e:
with excutils.save_and_reraise_exception():
if e.errno == errno.ENOENT:
msg = 'Sheepdog is not installed. OSError: command is %s.'
else:
msg = 'OSError: command is %s.'
LOG.error(msg, cmd)
except processutils.ProcessExecutionError as e:
_stderr = e.stderr
if _stderr.startswith(self.DOG_RESP_CONNECTION_ERROR):
reason = (_('Failed to connect to sheep daemon. '
'addr: %(addr)s, port: %(port)s'),
{'addr': addr, 'port': self.port})
raise SheepdogError(reason=reason)
raise SheepdogCmdError(
cmd=e.cmd,
exit_code=e.exit_code,
stdout=e.stdout.replace('\n', '\\n'),
stderr=e.stderr.replace('\n', '\\n'))
def _run_qemu_img(self, command, *params):
"""Executes qemu-img command wrapper."""
addr = self.get_addr()
cmd = ['env', 'LC_ALL=C', 'LANG=C', 'qemu-img', command]
for param in params:
if param.startswith(self.QEMU_SHEEPDOG_PREFIX):
# replace 'sheepdog:vdiname[:snapshotname]' to
# 'sheepdog:addr:port:vdiname[:snapshotname]'
param = param.replace(self.QEMU_SHEEPDOG_PREFIX,
'%(prefix)s%(addr)s:%(port)s:' %
{'prefix': self.QEMU_SHEEPDOG_PREFIX,
'addr': addr, 'port': self.port},
1)
cmd.append(param)
try:
return utils.execute(*cmd)
except OSError as e:
with excutils.save_and_reraise_exception():
if e.errno == errno.ENOENT:
msg = ('Qemu-img is not installed. OSError: command is '
'%(cmd)s.')
else:
msg = 'OSError: command is %(cmd)s.'
LOG.error(msg, {'cmd': tuple(cmd)})
except processutils.ProcessExecutionError as e:
_stderr = e.stderr
if self.QEMU_IMG_RESP_CONNECTION_ERROR in _stderr:
reason = (_('Failed to connect to sheep daemon. '
'addr: %(addr)s, port: %(port)s'),
{'addr': addr, 'port': self.port})
raise SheepdogError(reason=reason)
raise SheepdogCmdError(
cmd=e.cmd,
exit_code=e.exit_code,
stdout=e.stdout.replace('\n', '\\n'),
stderr=e.stderr.replace('\n', '\\n'))
def check_cluster_status(self):
try:
(_stdout, _stderr) = self._run_dog('cluster', 'info')
except SheepdogCmdError as e:
cmd = e.kwargs['cmd']
with excutils.save_and_reraise_exception():
LOG.error('Failed to check cluster status.'
'(command: %s)', cmd)
if _stdout.startswith(self.DOG_RESP_CLUSTER_RUNNING):
LOG.debug('Sheepdog cluster is running.')
return
reason = _('Invalid sheepdog cluster status.')
if _stdout.startswith(self.DOG_RESP_CLUSTER_NOT_FORMATTED):
reason = _('Cluster is not formatted. '
'You should probably perform "dog cluster format".')
elif _stdout.startswith(self.DOG_RESP_CLUSTER_WAITING):
reason = _('Waiting for all nodes to join cluster. '
'Ensure all sheep daemons are running.')
raise SheepdogError(reason=reason)
def create(self, vdiname, size):
try:
self._run_dog('vdi', 'create', vdiname, '%sG' % size)
except SheepdogCmdError as e:
_stderr = e.kwargs['stderr']
with excutils.save_and_reraise_exception():
if _stderr.rstrip('\\n').endswith(
self.DOG_RESP_VDI_ALREADY_EXISTS):
LOG.error('Volume already exists. %s', vdiname)
else:
LOG.error('Failed to create volume. %s', vdiname)
def delete(self, vdiname):
try:
(_stdout, _stderr) = self._run_dog('vdi', 'delete', vdiname)
if _stderr.rstrip().endswith(self.DOG_RESP_VDI_NOT_FOUND):
LOG.warning('Volume not found. %s', vdiname)
except SheepdogCmdError as e:
_stderr = e.kwargs['stderr']
with excutils.save_and_reraise_exception():
LOG.error('Failed to delete volume. %s', vdiname)
def create_snapshot(self, vdiname, snapname):
try:
self._run_dog('vdi', 'snapshot', '-s', snapname, vdiname)
except SheepdogCmdError as e:
cmd = e.kwargs['cmd']
_stderr = e.kwargs['stderr']
with excutils.save_and_reraise_exception():
if _stderr.rstrip('\\n').endswith(
self.DOG_RESP_SNAPSHOT_VDI_NOT_FOUND):
LOG.error('Volume "%s" not found. Please check the '
'results of "dog vdi list".',
vdiname)
elif _stderr.rstrip('\\n').endswith(
self.DOG_RESP_SNAPSHOT_EXISTED %
{'snapname': snapname}):
LOG.error('Snapshot "%s" already exists.', snapname)
else:
LOG.error('Failed to create snapshot. (command: %s)',
cmd)
def delete_snapshot(self, vdiname, snapname):
try:
(_stdout, _stderr) = self._run_dog('vdi', 'delete', '-s',
snapname, vdiname)
if _stderr.rstrip().endswith(self.DOG_RESP_SNAPSHOT_NOT_FOUND):
LOG.warning('Snapshot "%s" not found.', snapname)
elif _stderr.rstrip().endswith(self.DOG_RESP_VDI_NOT_FOUND):
LOG.warning('Volume "%s" not found.', vdiname)
except SheepdogCmdError as e:
cmd = e.kwargs['cmd']
_stderr = e.kwargs['stderr']
with excutils.save_and_reraise_exception():
LOG.error('Failed to delete snapshot. (command: %s)',
cmd)
def clone(self, src_vdiname, src_snapname, dst_vdiname, size):
try:
self._run_qemu_img('create', '-b',
'sheepdog:%(src_vdiname)s:%(src_snapname)s' %
{'src_vdiname': src_vdiname,
'src_snapname': src_snapname},
'sheepdog:%s' % dst_vdiname, '%sG' % size)
except SheepdogCmdError as e:
cmd = e.kwargs['cmd']
_stderr = e.kwargs['stderr']
with excutils.save_and_reraise_exception():
if self.QEMU_IMG_RESP_ALREADY_EXISTS in _stderr:
LOG.error('Clone volume "%s" already exists. '
'Please check the results of "dog vdi list".',
dst_vdiname)
elif self.QEMU_IMG_RESP_VDI_NOT_FOUND in _stderr:
LOG.error('Src Volume "%s" not found. '
'Please check the results of "dog vdi list".',
src_vdiname)
elif self.QEMU_IMG_RESP_SNAPSHOT_NOT_FOUND in _stderr:
LOG.error('Snapshot "%s" not found. '
'Please check the results of "dog vdi list".',
src_snapname)
elif self.QEMU_IMG_RESP_SIZE_TOO_LARGE in _stderr:
LOG.error('Volume size "%sG" is too large.', size)
else:
LOG.error('Failed to clone volume.(command: %s)', cmd)
def resize(self, vdiname, size):
size = int(size) * units.Gi
try:
(_stdout, _stderr) = self._run_dog('vdi', 'resize', vdiname, size)
except SheepdogCmdError as e:
_stderr = e.kwargs['stderr']
with excutils.save_and_reraise_exception():
if _stderr.rstrip('\\n').endswith(
self.DOG_RESP_VDI_NOT_FOUND):
LOG.error('Failed to resize vdi. vdi not found. %s',
vdiname)
elif _stderr.startswith(self.DOG_RESP_VDI_SHRINK_NOT_SUPPORT):
LOG.error('Failed to resize vdi. '
'Shrinking vdi not supported. '
'vdi: %(vdiname)s new size: %(size)s',
{'vdiname': vdiname, 'size': size})
elif _stderr.startswith(self.DOG_RESP_VDI_SIZE_TOO_LARGE):
LOG.error('Failed to resize vdi. '
'Too large volume size. '
'vdi: %(vdiname)s new size: %(size)s',
{'vdiname': vdiname, 'size': size})
else:
LOG.error('Failed to resize vdi. '
'vdi: %(vdiname)s new size: %(size)s',
{'vdiname': vdiname, 'size': size})
def get_volume_stats(self):
try:
(_stdout, _stderr) = self._run_dog('node', 'info', '-r')
except SheepdogCmdError as e:
with excutils.save_and_reraise_exception():
LOG.error('Failed to get volume status. %s', e)
return _stdout
def get_vdi_info(self, vdiname):
# Get info of the specified vdi.
try:
(_stdout, _stderr) = self._run_dog('vdi', 'list', vdiname, '-r')
except SheepdogCmdError as e:
with excutils.save_and_reraise_exception():
LOG.error('Failed to get vdi info. %s', e)
return _stdout
def update_node_list(self):
try:
(_stdout, _stderr) = self._run_dog('node', 'list', '-r')
except SheepdogCmdError as e:
with excutils.save_and_reraise_exception():
LOG.error('Failed to get node list. %s', e)
node_list = []
stdout = _stdout.strip('\n')
for line in stdout.split('\n'):
node_list.append(line.split()[1].split(':')[0])
self.node_list = node_list
class SheepdogIOWrapper(io.RawIOBase):
"""File-like object with Sheepdog backend."""
def __init__(self, addr, port, volume, snapshot_name=None):
self._addr = addr
self._port = port
self._vdiname = volume['name']
self._snapshot_name = snapshot_name
self._offset = 0
# SheepdogIOWrapper instance becomes invalid if a write error occurs.
self._valid = True
def _execute(self, cmd, data=None):
try:
# NOTE(yamada-h): processutils.execute causes busy waiting
# under eventlet.
# To avoid wasting CPU resources, it should not be used for
# the command which takes long time to execute.
# For workaround, we replace a subprocess module with
# the original one while only executing a read/write command.
_processutils_subprocess = processutils.subprocess
processutils.subprocess = eventlet.patcher.original('subprocess')
return processutils.execute(*cmd, process_input=data)[0]
except (processutils.ProcessExecutionError, OSError):
self._valid = False
msg = _('Sheepdog I/O Error, command was: "%s".') % ' '.join(cmd)
raise exception.VolumeDriverException(message=msg)
finally:
processutils.subprocess = _processutils_subprocess
def read(self, length=None):
if not self._valid:
msg = _('An error occurred while reading volume "%s".'
) % self._vdiname
raise exception.VolumeDriverException(message=msg)
cmd = ['dog', 'vdi', 'read', '-a', self._addr, '-p', self._port]
if self._snapshot_name:
cmd.extend(('-s', self._snapshot_name))
cmd.extend((self._vdiname, self._offset))
if length:
cmd.append(length)
data = self._execute(cmd)
self._offset += len(data)
return data
def write(self, data):
if not self._valid:
msg = _('An error occurred while writing to volume "%s".'
) % self._vdiname
raise exception.VolumeDriverException(message=msg)
length = len(data)
cmd = ('dog', 'vdi', 'write', '-a', self._addr, '-p', self._port,
self._vdiname, self._offset, length)
self._execute(cmd, data)
self._offset += length
return length
def seek(self, offset, whence=0):
if not self._valid:
msg = _('An error occurred while seeking for volume "%s".'
) % self._vdiname
raise exception.VolumeDriverException(message=msg)
if whence == 0:
# SEEK_SET or 0 - start of the stream (the default);
# offset should be zero or positive
new_offset = offset
elif whence == 1:
# SEEK_CUR or 1 - current stream position; offset may be negative
new_offset = self._offset + offset
else:
# SEEK_END or 2 - end of the stream; offset is usually negative
# TODO(yamada-h): Support SEEK_END
raise IOError(_("Invalid argument - whence=%s not supported.") %
whence)
if new_offset < 0:
raise IOError(_("Invalid argument - negative seek offset."))
self._offset = new_offset
def tell(self):
return self._offset
def flush(self):
pass
def fileno(self):
"""Sheepdog does not have support for fileno so we raise IOError.
Raising IOError is recommended way to notify caller that interface is
not supported - see http://docs.python.org/2/library/io.html#io.IOBase
"""
raise IOError(_("fileno is not supported by SheepdogIOWrapper"))
@interface.volumedriver
class SheepdogDriver(driver.VolumeDriver):
"""Executes commands relating to Sheepdog Volumes."""
VERSION = "1.0.0"
# ThirdPartySystems wiki page
CI_WIKI_NAME = "Cinder_Jenkins"
# TODO(jsbryant) Remove this driver in the 'U' release as it is no
# longer maintained.
SUPPORTED = False
def __init__(self, *args, **kwargs):
super(SheepdogDriver, self).__init__(*args, **kwargs)
self.configuration.append_config_values(sheepdog_opts)
addr = self.configuration.sheepdog_store_address
self.port = self.configuration.sheepdog_store_port
self.stats_pattern = re.compile(r'[\w\s%]*Total\s(\d+)\s(\d+)*')
self._stats = {}
self.node_list = [addr]
self.client = SheepdogClient(self.node_list, self.port)
@staticmethod
def get_driver_options():
return sheepdog_opts
def check_for_setup_error(self):
"""Check cluster status and update node list."""
self.client.check_cluster_status()
self.client.update_node_list()
def _is_cloneable(self, image_location, image_meta):
"""Check the image can be clone or not."""
if image_location is None:
return False
prefix = 'sheepdog://'
if not image_location.startswith(prefix):
LOG.debug("Image is not stored in sheepdog.")
return False
if image_meta['disk_format'] != 'raw':
LOG.debug("Image clone requires image format to be "
"'raw' but image %s(%s) is '%s'.",
image_location,
image_meta['id'],
image_meta['disk_format'])
return False
# check whether volume is stored in sheepdog
# The image location would be like
# "sheepdog://192.168.10.2:7000:Alice"
(ip, port, name) = image_location[len(prefix):].split(":", 2)
stdout = self.client.get_vdi_info(name)
# Dog command return 0 and has a null output if the volume not exists
if stdout:
return True
else:
LOG.debug("Can not find vdi %(image)s, is not cloneable",
{'image': name})
return False
def clone_image(self, context, volume,
image_location, image_meta,
image_service):
"""Create a volume efficiently from an existing image."""
image_location = image_location[0] if image_location else None
if not self._is_cloneable(image_location, image_meta):
return {}, False
volume_ref = {'name': image_meta['id'], 'size': image_meta['size']}
self.create_cloned_volume(volume, volume_ref)
self.client.resize(volume.name, volume.size)
vol_path = self.client.local_path(volume)
return {'provider_location': vol_path}, True
def create_cloned_volume(self, volume, src_vref):
"""Clone a sheepdog volume from another volume."""
snapshot_name = 'tmp-snap-%s-%s' % (src_vref['name'], volume.id)
snapshot = {
'name': snapshot_name,
'volume_name': src_vref['name'],
'volume_size': src_vref['size'],
}
self.client.create_snapshot(snapshot['volume_name'], snapshot_name)
try:
self.client.clone(snapshot['volume_name'], snapshot_name,
volume.name, volume.size)
except Exception:
with excutils.save_and_reraise_exception():
LOG.error('Failed to create cloned volume %s.',
volume.name)
finally:
# Delete temp Snapshot
self.client.delete_snapshot(snapshot['volume_name'], snapshot_name)
def create_volume(self, volume):
"""Create a sheepdog volume."""
self.client.create(volume.name, volume.size)
def create_volume_from_snapshot(self, volume, snapshot):
"""Create a sheepdog volume from a snapshot."""
self.client.clone(snapshot.volume_name, snapshot.name,
volume.name, volume.size)
def delete_volume(self, volume):
"""Delete a logical volume."""
self.client.delete(volume.name)
def copy_image_to_volume(self, context, volume, image_service, image_id):
with image_utils.temporary_file() as tmp:
# (wenhao): we don't need to convert to raw for sheepdog.
image_utils.fetch_verify_image(context, image_service,
image_id, tmp)
# remove the image created by import before this function.
# see volume/drivers/manager.py:_create_volume
self.client.delete(volume.name)
# convert and store into sheepdog
image_utils.convert_image(tmp, self.client.local_path(volume),
'raw')
self.client.resize(volume.name, volume.size)
def copy_volume_to_image(self, context, volume, image_service, image_meta):
"""Copy the volume to the specified image."""
image_id = image_meta['id']
with image_utils.temporary_file() as tmp:
# image_utils.convert_image doesn't support "sheepdog:" source,
# so we use the qemu-img directly.
# Sheepdog volume is always raw-formatted.
cmd = ('qemu-img',
'convert',
'-f', 'raw',
'-t', 'none',
'-O', 'raw',
self.client.local_path(volume),
tmp)
self._try_execute(*cmd)
with open(tmp, 'rb') as image_file:
image_service.update(context, image_id, {}, image_file)
def create_snapshot(self, snapshot):
"""Create a sheepdog snapshot."""
self.client.create_snapshot(snapshot.volume_name, snapshot.name)
def delete_snapshot(self, snapshot):
"""Delete a sheepdog snapshot."""
self.client.delete_snapshot(snapshot.volume_name, snapshot.name)
def ensure_export(self, context, volume):
"""Safely and synchronously recreate an export for a logical volume."""
pass
def create_export(self, context, volume, connector):
"""Export a volume."""
pass
def remove_export(self, context, volume):
"""Remove an export for a logical volume."""
pass
def initialize_connection(self, volume, connector):
return {
'driver_volume_type': 'sheepdog',
'data': {
'name': volume['name'],
'hosts': [self.client.get_addr()],
'ports': ["%d" % self.port],
}
}
def terminate_connection(self, volume, connector, **kwargs):
pass
def _update_volume_stats(self):
stats = {}
backend_name = "sheepdog"
if self.configuration:
backend_name = self.configuration.safe_get('volume_backend_name')
stats["volume_backend_name"] = backend_name or 'sheepdog'
stats['vendor_name'] = 'Open Source'
stats['driver_version'] = self.VERSION
stats['storage_protocol'] = 'sheepdog'
stats['total_capacity_gb'] = 'unknown'
stats['free_capacity_gb'] = 'unknown'
stats['reserved_percentage'] = 0
stats['QoS_support'] = False
stdout = self.client.get_volume_stats()
m = self.stats_pattern.match(stdout)
total = float(m.group(1))
used = float(m.group(2))
stats['total_capacity_gb'] = total / units.Gi
stats['free_capacity_gb'] = (total - used) / units.Gi
self._stats = stats
def get_volume_stats(self, refresh=False):
if refresh:
self._update_volume_stats()
return self._stats
def extend_volume(self, volume, new_size):
"""Extend an Existing Volume."""
self.client.resize(volume.name, new_size)
LOG.debug('Extend volume from %(old_size)s GB to %(new_size)s GB.',
{'old_size': volume.size, 'new_size': new_size})

View File

@ -1801,7 +1801,7 @@ class VolumeManager(manager.CleanableManager,
driver_volume_type: driver_volume_type:
a string to identify the type of volume. This can be used by the a string to identify the type of volume. This can be used by the
calling code to determine the strategy for connecting to the calling code to determine the strategy for connecting to the
volume. This could be 'iscsi', 'rbd', 'sheepdog', etc. volume. This could be 'iscsi', 'rbd', etc.
data: data:
this is the data that the calling code will use to connect to the this is the data that the calling code will use to connect to the

View File

@ -1,51 +0,0 @@
===============
Sheepdog driver
===============
Sheepdog is an open-source distributed storage system that provides a
virtual storage pool utilizing internal disk of commodity servers.
Sheepdog scales to several hundred nodes, and has powerful virtual disk
management features like snapshotting, cloning, rollback, and thin
provisioning.
More information can be found on `Sheepdog
Project <http://sheepdog.github.io/sheepdog/>`__.
This driver enables the use of Sheepdog through Qemu/KVM.
Supported operations
~~~~~~~~~~~~~~~~~~~~
Sheepdog driver supports these operations:
- Create, delete, attach, and detach volumes.
- Create, list, and delete volume snapshots.
- Create a volume from a snapshot.
- Copy an image to a volume.
- Copy a volume to an image.
- Clone a volume.
- Extend a volume.
Configuration
~~~~~~~~~~~~~
Set the following option in the ``cinder.conf`` file:
.. code-block:: ini
volume_driver = cinder.volume.drivers.sheepdog.SheepdogDriver
The following table contains the configuration options supported by the
Sheepdog driver:
.. config-table::
:config-target: Sheepdog
cinder.volume.drivers.sheepdog

View File

@ -153,9 +153,6 @@ title=RBD (Ceph) Storage Driver (RBD)
[driver.seagate] [driver.seagate]
title=Seagate Driver (iSCSI, FC) title=Seagate Driver (iSCSI, FC)
[driver.sheepdog]
title=Sheepdog Storage Driver (sheepdog)
[driver.storpool] [driver.storpool]
title=StorPool Storage Driver (storpool) title=StorPool Storage Driver (storpool)
@ -239,7 +236,6 @@ driver.qnap=complete
driver.quobyte=complete driver.quobyte=complete
driver.rbd=complete driver.rbd=complete
driver.seagate=complete driver.seagate=complete
driver.sheepdog=missing
driver.storpool=complete driver.storpool=complete
driver.synology=complete driver.synology=complete
driver.vrtsaccess=missing driver.vrtsaccess=missing
@ -301,7 +297,6 @@ driver.qnap=complete
driver.quobyte=complete driver.quobyte=complete
driver.rbd=complete driver.rbd=complete
driver.seagate=complete driver.seagate=complete
driver.sheepdog=complete
driver.storpool=complete driver.storpool=complete
driver.synology=complete driver.synology=complete
driver.vrtsaccess=complete driver.vrtsaccess=complete
@ -363,7 +358,6 @@ driver.qnap=missing
driver.quobyte=missing driver.quobyte=missing
driver.rbd=missing driver.rbd=missing
driver.seagate=missing driver.seagate=missing
driver.sheepdog=missing
driver.storpool=missing driver.storpool=missing
driver.synology=missing driver.synology=missing
driver.vrtsaccess=missing driver.vrtsaccess=missing
@ -428,7 +422,6 @@ driver.qnap=missing
driver.quobyte=missing driver.quobyte=missing
driver.rbd=missing driver.rbd=missing
driver.seagate=missing driver.seagate=missing
driver.sheepdog=missing
driver.storpool=missing driver.storpool=missing
driver.synology=missing driver.synology=missing
driver.vrtsaccess=missing driver.vrtsaccess=missing
@ -492,7 +485,6 @@ driver.qnap=missing
driver.quobyte=missing driver.quobyte=missing
driver.rbd=complete driver.rbd=complete
driver.seagate=missing driver.seagate=missing
driver.sheepdog=missing
driver.storpool=complete driver.storpool=complete
driver.synology=missing driver.synology=missing
driver.vrtsaccess=missing driver.vrtsaccess=missing
@ -557,7 +549,6 @@ driver.qnap=missing
driver.quobyte=missing driver.quobyte=missing
driver.rbd=missing driver.rbd=missing
driver.seagate=missing driver.seagate=missing
driver.sheepdog=missing
driver.storpool=missing driver.storpool=missing
driver.synology=missing driver.synology=missing
driver.vrtsaccess=missing driver.vrtsaccess=missing
@ -621,7 +612,6 @@ driver.qnap=missing
driver.quobyte=missing driver.quobyte=missing
driver.rbd=complete driver.rbd=complete
driver.seagate=missing driver.seagate=missing
driver.sheepdog=missing
driver.storpool=complete driver.storpool=complete
driver.synology=missing driver.synology=missing
driver.vrtsaccess=missing driver.vrtsaccess=missing
@ -686,7 +676,6 @@ driver.qnap=missing
driver.quobyte=missing driver.quobyte=missing
driver.rbd=missing driver.rbd=missing
driver.seagate=missing driver.seagate=missing
driver.sheepdog=missing
driver.storpool=complete driver.storpool=complete
driver.synology=missing driver.synology=missing
driver.vrtsaccess=missing driver.vrtsaccess=missing
@ -751,7 +740,6 @@ driver.qnap=missing
driver.quobyte=missing driver.quobyte=missing
driver.rbd=complete driver.rbd=complete
driver.seagate=complete driver.seagate=complete
driver.sheepdog=missing
driver.storpool=complete driver.storpool=complete
driver.synology=missing driver.synology=missing
driver.vrtsaccess=missing driver.vrtsaccess=missing
@ -813,7 +801,6 @@ driver.qnap=missing
driver.quobyte=missing driver.quobyte=missing
driver.rbd=missing driver.rbd=missing
driver.seagate=missing driver.seagate=missing
driver.sheepdog=missing
driver.storpool=missing driver.storpool=missing
driver.synology=missing driver.synology=missing
driver.vrtsaccess=missing driver.vrtsaccess=missing
@ -879,7 +866,6 @@ driver.qnap=missing
driver.quobyte=missing driver.quobyte=missing
driver.rbd=complete driver.rbd=complete
driver.seagate=missing driver.seagate=missing
driver.sheepdog=missing
driver.storpool=missing driver.storpool=missing
driver.synology=missing driver.synology=missing
driver.vrtsaccess=missing driver.vrtsaccess=missing

View File

@ -88,5 +88,6 @@ release.
* Ussuri * Ussuri
* Huawei FusionStorage Driver * Huawei FusionStorage Driver
* ProphetStor Flexvisor Driver
* Nimble Storage Driver * Nimble Storage Driver
* ProphetStor Flexvisor Driver
* Sheepdog Driver

View File

@ -0,0 +1,6 @@
---
upgrade:
- |
The Sheepdog driver was marked unsupported in the Train release and has
now been removed. All data on Sheepdog backends should be migrated to a
supported backend before upgrading your Cinder installation.