Install and configure a storage node ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Prerequisites ------------- Before you install and configure the Block Storage service on the storage node, you must prepare the storage device. .. note:: Perform these steps on the storage node. #. Install the supporting utility packages: .. code-block:: console # apt install lvm2 .. end .. note:: Some distributions include LVM by default. #. Create the LVM physical volume ``/dev/sdb``: .. code-block:: console # pvcreate /dev/sdb Physical volume "/dev/sdb" successfully created .. end #. Create the LVM volume group ``cinder-volumes``: .. code-block:: console # vgcreate cinder-volumes /dev/sdb Volume group "cinder-volumes" successfully created .. end The Block Storage service creates logical volumes in this volume group. #. Only instances can access Block Storage volumes. However, the underlying operating system manages the devices associated with the volumes. By default, the LVM volume scanning tool scans the ``/dev`` directory for block storage devices that contain volumes. If projects use LVM on their volumes, the scanning tool detects these volumes and attempts to cache them which can cause a variety of problems with both the underlying operating system and project volumes. You must reconfigure LVM to scan only the devices that contain the ``cinder-volumes`` volume group. Edit the ``/etc/lvm/lvm.conf`` file and complete the following actions: * In the ``devices`` section, add a filter that accepts the ``/dev/sdb`` device and rejects all other devices: .. path /etc/lvm/lvm.conf .. code-block:: bash devices { ... filter = [ "a/sdb/", "r/.*/"] .. end Each item in the filter array begins with ``a`` for **accept** or ``r`` for **reject** and includes a regular expression for the device name. The array must end with ``r/.*/`` to reject any remaining devices. You can use the :command:`vgs -vvvv` command to test filters. .. warning:: If your storage nodes use LVM on the operating system disk, you must also add the associated device to the filter. For example, if the ``/dev/sda`` device contains the operating system: .. ignore_path /etc/lvm/lvm.conf .. code-block:: ini filter = [ "a/sda/", "a/sdb/", "r/.*/"] .. end Similarly, if your compute nodes use LVM on the operating system disk, you must also modify the filter in the ``/etc/lvm/lvm.conf`` file on those nodes to include only the operating system disk. For example, if the ``/dev/sda`` device contains the operating system: .. path /etc/openstack-dashboard/local_settings.py .. code-block:: ini filter = [ "a/sda/", "r/.*/"] .. end Install and configure components -------------------------------- #. Install the packages: .. code-block:: console # apt install cinder-volume .. end #. Edit the ``/etc/cinder/cinder.conf`` file and complete the following actions: * In the ``[database]`` section, configure database access: .. path /etc/cinder/cinder.conf .. code-block:: ini [database] # ... connection = mysql+pymysql://cinder:CINDER_DBPASS@controller/cinder .. end Replace ``CINDER_DBPASS`` with the password you chose for the Block Storage database. * In the ``[DEFAULT]`` section, configure ``RabbitMQ`` message queue access: .. path /etc/cinder/cinder.conf .. code-block:: ini [DEFAULT] # ... transport_url = rabbit://openstack:RABBIT_PASS@controller .. end Replace ``RABBIT_PASS`` with the password you chose for the ``openstack`` account in ``RabbitMQ``. * In the ``[DEFAULT]`` and ``[keystone_authtoken]`` sections, configure Identity service access: .. path /etc/cinder/cinder.conf .. code-block:: ini [DEFAULT] # ... auth_strategy = keystone [keystone_authtoken] # ... auth_uri = http://controller:5000 auth_url = http://controller:35357 memcached_servers = controller:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = cinder password = CINDER_PASS .. end Replace ``CINDER_PASS`` with the password you chose for the ``cinder`` user in the Identity service. .. note:: Comment out or remove any other options in the ``[keystone_authtoken]`` section. * In the ``[DEFAULT]`` section, configure the ``my_ip`` option: .. path /etc/cinder/cinder.conf .. code-block:: ini [DEFAULT] # ... my_ip = MANAGEMENT_INTERFACE_IP_ADDRESS .. end Replace ``MANAGEMENT_INTERFACE_IP_ADDRESS`` with the IP address of the management network interface on your storage node, typically 10.0.0.41 for the first node in the `example architecture `_. * In the ``[lvm]`` section, configure the LVM back end with the LVM driver, ``cinder-volumes`` volume group, iSCSI protocol, and appropriate iSCSI service: .. path /etc/cinder/cinder.conf .. code-block:: ini [lvm] # ... volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver volume_group = cinder-volumes iscsi_protocol = iscsi iscsi_helper = tgtadm .. end * In the ``[DEFAULT]`` section, enable the LVM back end: .. path /etc/cinder/cinder.conf .. code-block:: ini [DEFAULT] # ... enabled_backends = lvm .. end .. note:: Back-end names are arbitrary. As an example, this guide uses the name of the driver as the name of the back end. * In the ``[DEFAULT]`` section, configure the location of the Image service API: .. path /etc/cinder/cinder.conf .. code-block:: ini [DEFAULT] # ... glance_api_servers = http://controller:9292 .. end * In the ``[oslo_concurrency]`` section, configure the lock path: .. path /etc/cinder/cinder.conf .. code-block:: ini [oslo_concurrency] # ... lock_path = /var/lib/cinder/tmp .. end Finalize installation --------------------- #. Restart the Block Storage volume service including its dependencies: .. code-block:: console # service tgt restart # service cinder-volume restart .. end