9.4 KiB

Raw Permalink Blame History

User Messages

General information

User messages are a way to inform users about the state of asynchronous operations. One example would be notifying the user of why a volume provisioning request failed. End users can request these messages via the Volume v3 REST API under the /messages resource. The REST API allows only GET and DELETE verbs for this resource.

Internally, you use the cinder.message.api to work with messages. In order to prevent leakage of sensitive information or breaking the volume service abstraction layer, free-form messages are not allowed. Instead, all messages must be defined using a combination of pre-defined fields in the cinder.message.message_field module.

The message ultimately displayed to end users is combined from an Action field and a Detail field.

The Action field describes what was taking place when the message was created, for example, Action.COPY_IMAGE_TO_VOLUME.
The Detail field is used to provide more information, for example, Detail.NOT_ENOUGH_SPACE_FOR_IMAGE or Detail.QUOTA_EXCEED.

Example

Example message generation:

from cinder import context
from cinder.message import api as message_api
from cinder.message import message_field

self.message_api = message_api.API()

context = context.RequestContext()
volume_id = 'f292cc0c-54a7-4b3b-8174-d2ff82d87008'

self.message_api.create(
    context,
    message_field.Action.UNMANAGE_VOLUME,
    resource_uuid=volume_id,
    detail=message_field.Detail.UNMANAGE_ENC_NOT_SUPPORTED)

Will produce roughly the following:

GET /v3/6c430ede-9476-4128-8838-8d3929ced223/messages
{
  "messages": [
    {
     "id": "5429fffa-5c76-4d68-a671-37a8e24f37cf",
     "event_id": "VOLUME_VOLUME_006_008",
     "user_message": "unmanage volume: Unmanaging encrypted volumes is not supported.",
     "message_level": "ERROR",
     "resource_type": "VOLUME",
     "resource_uuid": "f292cc0c-54a7-4b3b-8174-d2ff82d87008",
     "created_at": 2018-08-27T09:49:58-05:00,
     "guaranteed_until": 2018-09-27T09:49:58-05:00,
     "request_id": "req-936666d2-4c8f-4e41-9ac9-237b43f8b848",
    }
  ]
}

Adding user messages

If you are creating a message in the code but find that the predefined fields are insufficient, just add what you need to cinder.message.message_field. The key thing to keep in mind is that all defined fields should be appropriate for any API user to see and not contain any sensitive information. A good rule-of-thumb is to be very general in error messages unless the issue is due to a bad user action, then be specific.

As a convenience to developers, the Detail class contains a EXCEPTION_DETAIL_MAPPINGS dict. This maps Detail fields to particular Cinder exceptions, and allows you to create messages in a context where you've caught an Exception that could be any of several possibilities. Instead of having to sort through them where you've caught the exception, you can call message_api.create and pass it both the exception and a general detail field like Detail.SOMETHING_BAD_HAPPENED (that's not a real field, but you get the idea). If the passed exception is in the mapping, the resulting message will have the mapped Detail field instead of the generic one.

Usage patterns

These are taken from the Cinder code. The exact code may have changed by the time you read this, but the general idea should hold.

No exception in context

From cinder/compute/nova.py:

def extend_volume(self, context, server_ids, volume_id):
    api_version = '2.51'
    events = [self._get_volume_extended_event(server_id, volume_id)
              for server_id in server_ids]
    result = self._send_events(context, events, api_version=api_version)
    if not result:
        self.message_api.create(
            context,
            message_field.Action.EXTEND_VOLUME,
            resource_uuid=volume_id,
            detail=message_field.Detail.NOTIFY_COMPUTE_SERVICE_FAILED)
    return result

You must always pass the context object and an action.
We're working with an existing volume, so pass its ID as the resource_uuid.
You need to fill in some detail, or else the code will supply an UNKNOWN_ERROR, which isn't very helpful.

Cinder exception in context

From cinder/scheduler/manager.py:

except exception.NoValidBackend as ex:
    QUOTAS.rollback(context, reservations,
                    project_id=volume.project_id)
    _extend_volume_set_error(self, context, ex, request_spec)
    self.message_api.create(
        context,
        message_field.Action.EXTEND_VOLUME,
        resource_uuid=volume.id,
        exception=ex)

You must always pass the context object and an action.
Since we have it available, pass the volume ID as the resource_uuid.
It's a Cinder exception. Check to see if it's in the mapping.
- If it's there, we can pass it, and the detail will be supplied by the code.
- It it's not, consider adding it and mapping it to an existing Detail field. If there's no current Detail field for that exception, go ahead and add that, too.
- On the other hand, maybe it's in the mapping, but you have more information in this code context than is available in the mapped Detail field. In that case, you may want to use a different Detail field (creating it if necessary).
- Remember, if you pass both a mapped exception and a detail, the passed detail will be ignored and the mapped Detail field will be used instead.

General Exception in context

Not passing the Exception to message_api.create()

From cinder/volume/manager.py:

try:
    self.driver.extend_volume(volume, new_size)
except exception.TargetUpdateFailed:
    # We just want to log this but continue on with quota commit
    LOG.warning('Volume extended but failed to update target.')
except Exception:
    LOG.exception("Extend volume failed.",
                  resource=volume)
    self.message_api.create(
        context,
        message_field.Action.EXTEND_VOLUME,
        resource_uuid=volume.id,
        detail=message_field.Detail.DRIVER_FAILED_EXTEND)

Pass the context object and an action; pass a resource_uuid since we have it.
We're not passing the exception, so the detail we pass is guaranteed to be used.

Passing the Exception to message_api.create()

From cinder/volume/manager.py:

try:
    if volume_metadata.get('readonly') == 'True' and mode != 'ro':
        raise exception.InvalidVolumeAttachMode(mode=mode,
                                                volume_id=volume.id)
    utils.require_driver_initialized(self.driver)

    LOG.info('Attaching volume %(volume_id)s to instance '
             '%(instance)s at mountpoint %(mount)s on host '
             '%(host)s.',
             {'volume_id': volume_id, 'instance': instance_uuid,
              'mount': mountpoint, 'host': host_name_sanitized},
             resource=volume)
    self.driver.attach_volume(context,
                              volume,
                              instance_uuid,
                              host_name_sanitized,
                              mountpoint)
except Exception as excep:
    with excutils.save_and_reraise_exception():
        self.message_api.create(
            context,
            message_field.Action.ATTACH_VOLUME,
            resource_uuid=volume_id,
            exception=excep)
        attachment.attach_status = (
            fields.VolumeAttachStatus.ERROR_ATTACHING)
        attachment.save()

Pass the context object and an action; pass a resource_uuid since we have it.
We're passing an exception, which could be a Cinder InvalidVolumeAttachMode, which is in the mapping. In that case, the mapped Detail will be used; otherwise, the code will supply a Detail.UNKNOWN_ERROR.

This is appropriate if we really have no idea what happened. If it's possible to provide more information, we can pass a different, generic Detail field (creating it if necessary). The passed detail would be used for any exception that's not in the mapping. If it's a mapped exception, then the mapped Detail field will be used.

Module documentation

The Message API Module

cinder.message.api

The Message Field Module

cinder.message.message_field

The Defined Messages Module

This module is DEPRECATED and is currently only used by cinder.api.v3.messages to handle pre-Pike message database objects. (Editorial comment:: With the default message_ttl of 2592000 seconds (30 days), it's probably safe to remove this module during the Train development cycle.)

cinder.message.defined_messages

9.4 KiB Raw Permalink Blame History