cinder/contrib/block-box

block-box

Standalone Cinder Containerized using Docker Compose

Cinder

Provides Block Storage as a service as part of the OpenStack Project. This project deploys Cinder in containers using docker-compose and also enabled the use of Cinder's noauth option which eliminates the need for keystone. One could also easily add keystone into the compose file along with an init script to set up endpoints.

LOCI (Lightweight Open Compute Initiative)

The block-box uses OpenStack Loci to build a base Cinder image to use for each service. The examples use Debian as the base OS, but you can choose between Debian, CentOS and Ubuntu.

We're currently using Cinder's noauth option, but this pattern provides flexibility to add a Keystone service if desired.

To build

Start by building the required images. This repo includes a Makefile to enable building of openstack/loci images of Cinder. The Makefile includes variables to select between platform (debian, ubuntu or centos) and also allows which branch of each project to build the image from. This includes master, stable/xyz as well as patch versions. Additional variables are provided and can be passed to make using the -e option to control things like naming and image tags. See the Makefile for more info.

If you're going to utilize an external storage device (ie not using LVM), all you need to build is the base Cinder image. Set the variable in the Makefile to choose the Cinder Branch you'd like to use and Platform then simply run:

make base

You can also build an image to run LVM (NOTE: This is dependent on the base cinder image):

make lvm

Finally the last image is a devenv image that will mount the cinder repo you've checked out into a container and includes test-requirements.

make base

For more information and options, check out the openstack/loci page on github.

NOTE The loci project is moving fairly quickly, and it may or may not continue to be a straight forward light weight method of building container Images. The build has been known to now work at times, and if it becomes bloated or burdensome it's easy to swap in another image builder (or write your own even).

This will result in some base images that we'll use:

1. cinder (openstack/loci image)
2. cinder-lvm (special cinder image with LVM config)
3. cinder-devenv (provides a Cinder development env container)

cinder

Creates a base image with cinder installed via source. This base image is enough to run all of the services including api, scheduler and volume with the exception of cinder-volume with the LVM driver which needs some extra packages installed like LVM2 and iSCSI target driver.

Each Cinder service has an executable entrypoint at /usr/local/bin.

NOTE If you choose to build images from something other than the default Debian base, you'll need to modify the Dockerfile for this image as well.

cinder-lvm

This is a special image that is built from the base cinder image and adds the necessary packages for LVM and iSCSI.

cinder-devenv

You might want to generate a conf file, or if you're like me, use Docker to do some of your Cinder development. You can run this container which has all of the current development packages and python test-requirements for Cinder.

You can pass in your current source directory from your local machine using -v in your run command, here's a trivial example that generates a sample config file. Note we don't use tox because we're already in an isolated environment.

docker run -it -v /home/jgriffith/src/cinder:/cinder  \
  cinder-devenv \
  bash -c "cd cinder && oslo-config-generator \
  --config-file=cinder/config/cinder-config-generator.conf"

Keep in mind the command will execute and then exit, the result is written to the cinder directory specified in the -v argument. In this example for instance the result would be a newly generated cinder.conf.sample file in /home/jgriffith/src/cinder/etc/cinder

Accessing via cinderclient

You can of course build a cinderclient container with a cinder entrypoint and use that for access, but in order to take advantage of things like the local-attach extension, you'll need to install the client tools on the host.

The current release version in pypi doesn't include noauth support, so you'll need to install from source, but that's not hard:

sudo pip install pytz
sudo pip install git+https://github.com/openstack/python-cinderclient
sudo pip install git+https://github.com/openstack/python-brick-cinderclient-ext

Before using, you must specify these env variables at least, OS_AUTH_TYPE, CINDER_ENDPOINT, OS_PROJECT_ID, OS_USERNAME. You can utilize our sample file cinder.rc, then you can use client to communicate with your containerized cinder deployment with noauth!!

Remember, to perform local-attach/local-detach of volumes you'll need to use sudo. To preserve your env variables don't forget to use sudo -E cinder xxxxx

To run

docker-compose up -d

Don't forget to modify the etc-cinder/cinder.conf file as needed for your specific driver. We'll be adding support for the LVM driver and LIO Tgts shortly, but for now you won't have much luck without using an external device (no worries, there are over 80 to choose from).

Note: If you use cinder-lvm image, you must guarantee the required volume group which is specified in the cinder.conf already exists in the host environment before starting the service.

Adding your own driver

We don't do multi-backend in this type of environment; instead we just add another container running the backend we want. We can easily add to the base service we've create using additional compose files.

The file docker-compose-add-vol-service.yml provides an example additional compose file that will create another cinder-volume service configured to run the SolidFire backend.

After launching the main compose file:

docker-compose up -d

Once the services are initialized and the database is synchronized, you can add another backend by running:

docker-compose -f ./docker-compose-add-vol-service.yml up -d

Note that things like network settings and ports are IMPORTANT here!!

Access using the cinderclient container

You can use your own cinderclient and openrc, or use the provided cinderclient container. You'll need to make sure and specify to use the same network that was used by compose.

docker run -it -e OS_AUTH_TYPE=noauth \
  -e CINDERCLIENT_BYPASS_URL=http://cinder-api:8776/v3 \
  -e OS_PROJECT_ID=foo \
  -e OS_VOLUME_API_VERSION=3.27 \
  --network blockbox_default cinderclient list

Or without docker-compose

That's ok, you can always just run the commands yourself using docker run:

# We set passwords and db creation in the docker-entrypoint-initdb.d script
docker run -d -p 3306:3306 \
  -v ~/block-box/docker-entrypoint-initdb.d:/docker-entrypoint-initdb.d \
  --name mariadb \
  --hostname mariadb \
  -e MYSQL_ROOT_PASSWORD=password \
  mariadb

# Make sure the environment vars match the startup script for your database host
docker run -d -p 5000:5000 \
  -p 35357:35357 \
  --link mariadb \
  --name keystone \
  --hostname keystone \
  -e OS_PASSWORD=password \
  -e DEMO_PASSWORD=password \
  -e DB_HOST=mariadb \
  -e DB_PASSWORD=password \
  keystone

docker run -d -p 5672:5672 --name rabbitmq --hostname rabbitmq rabbitmq

docker run -d -p 8776:8776 \
  --link mariadb \
  --link rabbitmq \
  --name cinder-api \
  --hostname cinder-api \
  -v ~/block-box/etc-cinder:/etc/cinder \
  -v ~/block-box/init-scripts:/init-scripts
  cinder_debian sh /init-scripts/cinder-api.sh

docker run -d --name cinder-scheduler \
  --hostname cinder-scheduler \
  --link mariadb \
  --link rabbitmq \
  -v ~/block-box/etc-cinder:/etc/cinder \
  cinder_debian cinder-scheduler

docker run -d --name cinder-volume \
  --hostname cinder-volume \
  --link mariadb \
  --link rabbitmq \
  -v ~/block-box/etc-cinder:/etc/cinder \
  cinder-debian cinder-volume