docs: Update docks referring to Pike release

Now that we support other Cinder releases besides Pike we need to update
the documentation a little bit to reflect this.

README.rst

@@ -101,13 +101,21 @@ You can either use a container:
 
 .. code-block:: shell
 
-   $ docker run --name=cinderlib --privileged --net=host -v /etc/iscsi:/etc/iscsi -v /dev:/dev -it akrog/cinderlib python
+   $ docker run --name=cinderlib --privileged --net=host \
+     -v /etc/iscsi:/etc/iscsi \
+     -v /dev:/dev \
+     -v /etc/lvm:/etc/lvm \
+     -v /var/lock/lvm:/var/lock/lvm \
+     -v /lib/modules:/lib/modules \
+     -v /run/udev:/run/udev \
+     -v /etc/localtime:/etc/localtime \
+     -it akrog/cinderlib python
 
 Or install things on baremetal/VM:
 
 .. code-block:: shell
 
-    $ sudo yum install -y centos-release-openstack-pike
+    $ sudo yum install -y centos-release-openstack-queens
     $ test -f  /etc/yum/vars/contentdir || echo centos >/etc/yum/vars/contentdir
     $ sudo yum install -y openstack-cinder targetcli python-pip
     $ sudo pip install cinderlib

docs/installation.rst

@@ -27,8 +27,8 @@ the RPM to set up the OpenStack repository:
 
 .. code-block:: console
 
-    # yum install -y centos-release-openstack-pike
+    # yum install -y centos-release-openstack-queens
-    # yum-config-manager --enable openstack-pike
+    # yum-config-manager --enable openstack-queens
     # yum update -y
     # yum install -y openstack-cinder
 
@@ -37,8 +37,8 @@ to set up the OpenStack repository:
 
 .. code-block:: console
 
-    # yum install -y https://repos.fedorapeople.org/repos/openstack/openstack-pike/rdo-release-pike-1.noarch.rpm
+    # yum install -y https://repos.fedorapeople.org/repos/openstack/openstack-queens/rdo-release-queens-1.noarch.rpm
-    # yum-config-manager --enable openstack-pike
+    # yum-config-manager --enable openstack-queens
     # sudo yum update -y
     # yum install -y openstack-cinder
 
@@ -99,7 +99,7 @@ we can install the drivers from source:
 
     $ virtualenv cinder
     $ source cinder/bin/activate
-    $ pip install git+https://github.com/openstack/cinder.git@stable/pike
+    $ pip install git+https://github.com/openstack/cinder.git
 
 Library
 _______

docs/introduction.rst

@@ -89,8 +89,6 @@ more noticeable limitations one should be aware of are:
 
 - Only a subset of Cinder available operations are supported by the library.
 
-- The only Cinder release that has been tested with the library has been Pike.
-
 - Access to a small number of storage arrays has limited the number of drivers
   that have been verified to work with cinderlib.
 

docs/topics/backends.rst

@@ -152,7 +152,7 @@ Some of the keys provided in the stats dictionary include:
 - `vendor_name volume_backend_name`
 
 Additional information can be found in the `Volume Stats section
-<https://docs.openstack.org/cinder/pike/contributor/drivers.html#volume-stats>`_
+<https://docs.openstack.org/cinder/queens/contributor/drivers.html#volume-stats>`_
 within the Developer's Documentation.
 
 Gathering stats is a costly operation for many storage backends, so by default

docs/topics/volumes.rst

@@ -87,7 +87,7 @@ information.
 
 Available fields with their types can be found in `Cinder's Volume OVO
 definition
-<https://github.com/openstack/cinder/blob/stable/pike/cinder/objects/volume.py#L69-L126>`_,
+<https://github.com/openstack/cinder/blob/stable/queens/cinder/objects/volume.py#L71-L131>`_,
 but most of them are only relevant within the full *Cinder* service.
 
 We can access these fields as if they were part of the *cinderlib* *Volume*

docs/validated_backends.rst

@@ -27,7 +27,7 @@ LVM
 ---
 
 - *Cinderlib version*: v0.1.0, v0.2.0
-- *Cinder release*: *Pike*
+- *Cinder release*: *Pike*, *Queens*, *Rocky*
 - *Storage*: LVM with LIO
 - *Connection type*: iSCSI
 - *Requirements*:  None
@@ -91,7 +91,7 @@ XtremIO
 -------
 
 - *Cinderlib version*: v0.1.0, v0.2.0
-- *Cinder release*: *Pike*
+- *Cinder release*: *Pike*, *Queens*, *Rocky*
 - *Storage*: Dell EMC XtremIO
 - *Versions*: v4.0.15-20_hotfix_3
 - *Connection type*: iSCSI, FC
@@ -133,7 +133,7 @@ Kaminario
 ---------
 
 - *Cinderlib version*: v0.1.0, v0.2.0
-- *Cinder release*: *Pike*
+- *Cinder release*: *Pike*, *Queens*, *Rocky*
 - *Storage*: Kaminario K2
 - *Versions*: VisionOS v6.0.72.10
 - *Connection type*: iSCSI
@@ -190,7 +190,7 @@ VMAX
 ----
 
 - *Cinderlib version*: v0.1.0
-- *Cinder release*: Pike, Queens, Rocky
+- *Cinder release*: *Pike*, *Queens*, *Rocky*
 - *Storage*: Dell EMC VMAX
 - *Versions*: Unknown
 - *Connection type*: iSCSI

docs/validating_backends.rst

@@ -45,7 +45,7 @@ be comprised of three steps:
 
   To see the Python dependencies for each backend we can check the
   `driver-requirements.txt
-  <https://raw.githubusercontent.com/openstack/cinder/stable/pike/driver-requirements.txt>`_
+  <https://raw.githubusercontent.com/openstack/cinder/stable/queens/driver-requirements.txt>`_
   file from the Cinder project, or in *cinderlib*'s `setup.py` file listed in
   the `extras` dictionary.
 
@@ -218,7 +218,7 @@ was tested please include the following information in your report:
   configuration files...
 - Contents of the YAML file with usernames, passwords, and IPs appropriately
   masked.
-- *Cinder* release: If a release other than *Pike* has been used.
+- *Cinder* releases: What cinder releases have been tested.
 - Additional notes: Limitations or anything worth mentioning.
 
 To report the results of the tests please create an `issue on the project`_