[DEFAULT] # # Options defined in oslo.messaging # # Use durable queues in amqp. (boolean value) # Deprecated group/name - [DEFAULT]/rabbit_durable_queues #amqp_durable_queues=false # Auto-delete queues in amqp. (boolean value) #amqp_auto_delete=false # Size of RPC connection pool. (integer value) #rpc_conn_pool_size=30 # Qpid broker hostname. (string value) #qpid_hostname=localhost # Qpid broker port. (integer value) #qpid_port=5672 # Qpid HA cluster host:port pairs. (list value) #qpid_hosts=$qpid_hostname:$qpid_port # Username for Qpid connection. (string value) #qpid_username= # Password for Qpid connection. (string value) #qpid_password= # Space separated list of SASL mechanisms to use for auth. # (string value) #qpid_sasl_mechanisms= # Seconds between connection keepalive heartbeats. (integer # value) #qpid_heartbeat=60 # Transport to use, either 'tcp' or 'ssl'. (string value) #qpid_protocol=tcp # Whether to disable the Nagle algorithm. (boolean value) #qpid_tcp_nodelay=true # The number of prefetched messages held by receiver. (integer # value) #qpid_receiver_capacity=1 # The qpid topology version to use. Version 1 is what was # originally used by impl_qpid. Version 2 includes some # backwards-incompatible changes that allow broker federation # to work. Users should update to version 2 when they are # able to take everything down, as it requires a clean break. # (integer value) #qpid_topology_version=1 # SSL version to use (valid only if SSL enabled). valid values # are TLSv1, SSLv23 and SSLv3. SSLv2 may be available on some # distributions. (string value) #kombu_ssl_version= # SSL key file (valid only if SSL enabled). (string value) #kombu_ssl_keyfile= # SSL cert file (valid only if SSL enabled). (string value) #kombu_ssl_certfile= # SSL certification authority file (valid only if SSL # enabled). (string value) #kombu_ssl_ca_certs= # How long to wait before reconnecting in response to an AMQP # consumer cancel notification. (floating point value) #kombu_reconnect_delay=1.0 # The RabbitMQ broker address where a single node is used. # (string value) #rabbit_host=localhost # The RabbitMQ broker port where a single node is used. # (integer value) #rabbit_port=5672 # RabbitMQ HA cluster host:port pairs. (list value) #rabbit_hosts=$rabbit_host:$rabbit_port # Connect over SSL for RabbitMQ. (boolean value) #rabbit_use_ssl=false # The RabbitMQ userid. (string value) #rabbit_userid=guest # The RabbitMQ password. (string value) #rabbit_password=guest # the RabbitMQ login method (string value) #rabbit_login_method=AMQPLAIN # The RabbitMQ virtual host. (string value) #rabbit_virtual_host=/ # How frequently to retry connecting with RabbitMQ. (integer # value) #rabbit_retry_interval=1 # How long to backoff for between retries when connecting to # RabbitMQ. (integer value) #rabbit_retry_backoff=2 # Maximum number of RabbitMQ connection retries. Default is 0 # (infinite retry count). (integer value) #rabbit_max_retries=0 # Use HA queues in RabbitMQ (x-ha-policy: all). If you change # this option, you must wipe the RabbitMQ database. (boolean # value) #rabbit_ha_queues=false # If passed, use a fake RabbitMQ provider. (boolean value) #fake_rabbit=false # ZeroMQ bind address. Should be a wildcard (*), an ethernet # interface, or IP. The "host" option should point or resolve # to this address. (string value) #rpc_zmq_bind_address=* # MatchMaker driver. (string value) #rpc_zmq_matchmaker=oslo.messaging._drivers.matchmaker.MatchMakerLocalhost # ZeroMQ receiver listening port. (integer value) #rpc_zmq_port=9501 # Number of ZeroMQ contexts, defaults to 1. (integer value) #rpc_zmq_contexts=1 # Maximum number of ingress messages to locally buffer per # topic. Default is unlimited. (integer value) #rpc_zmq_topic_backlog= # Directory for holding IPC sockets. (string value) #rpc_zmq_ipc_dir=/var/run/openstack # Name of this node. Must be a valid hostname, FQDN, or IP # address. Must match "host" option, if running Nova. (string # value) #rpc_zmq_host=cinder # Seconds to wait before a cast expires (TTL). Only supported # by impl_zmq. (integer value) #rpc_cast_timeout=30 # Heartbeat frequency. (integer value) #matchmaker_heartbeat_freq=300 # Heartbeat time-to-live. (integer value) #matchmaker_heartbeat_ttl=600 # Size of RPC greenthread pool. (integer value) #rpc_thread_pool_size=64 # Driver or drivers to handle sending notifications. (multi # valued) #notification_driver= # AMQP topic used for OpenStack notifications. (list value) # Deprecated group/name - [rpc_notifier2]/topics #notification_topics=notifications # Seconds to wait for a response from a call. (integer value) #rpc_response_timeout=60 # A URL representing the messaging driver to use and its full # configuration. If not set, we fall back to the rpc_backend # option and driver specific configuration. (string value) #transport_url= # The messaging driver to use, defaults to rabbit. Other # drivers include qpid and zmq. (string value) #rpc_backend=rabbit # The default exchange under which topics are scoped. May be # overridden by an exchange name specified in the # transport_url option. (string value) #control_exchange=openstack # # Options defined in cinder.exception # # Make exception message format errors fatal. (boolean value) #fatal_exception_format_errors=false # # Options defined in cinder.quota # # Number of volumes allowed per project (integer value) #quota_volumes=10 # Number of volume snapshots allowed per project (integer # value) #quota_snapshots=10 # Number of consistencygroups allowed per project (integer # value) #quota_consistencygroups=10 # Total amount of storage, in gigabytes, allowed for volumes # and snapshots per project (integer value) #quota_gigabytes=1000 # Number of volume backups allowed per project (integer value) #quota_backups=10 # Total amount of storage, in gigabytes, allowed for backups # per project (integer value) #quota_backup_gigabytes=1000 # Number of seconds until a reservation expires (integer # value) #reservation_expire=86400 # Count of reservations until usage is refreshed (integer # value) #until_refresh=0 # Number of seconds between subsequent usage refreshes # (integer value) #max_age=0 # Default driver to use for quota checks (string value) #quota_driver=cinder.quota.DbQuotaDriver # Enables or disables use of default quota class with default # quota. (boolean value) #use_default_quota_class=true # # Options defined in cinder.service # # Interval, in seconds, between nodes reporting state to # datastore (integer value) #report_interval=10 # Interval, in seconds, between running periodic tasks # (integer value) #periodic_interval=60 # Range, in seconds, to randomly delay when starting the # periodic task scheduler to reduce stampeding. (Disable by # setting to 0) (integer value) #periodic_fuzzy_delay=60 # IP address on which OpenStack Volume API listens (string # value) #osapi_volume_listen=0.0.0.0 # Port on which OpenStack Volume API listens (integer value) #osapi_volume_listen_port=8776 # Number of workers for OpenStack Volume API service. The # default is equal to the number of CPUs available. (integer # value) #osapi_volume_workers= # # Options defined in cinder.ssh_utils # # Option to enable strict host key checking. When set to # "True" Cinder will only connect to systems with a host key # present in the configured "ssh_hosts_key_file". When set to # "False" the host key will be saved upon first connection and # used for subsequent connections. Default=False (boolean # value) #strict_ssh_host_key_policy=false # File containing SSH host keys for the systems with which # Cinder needs to communicate. OPTIONAL: # Default=$state_path/ssh_known_hosts (string value) #ssh_hosts_key_file=$state_path/ssh_known_hosts # # Options defined in cinder.test # # File name of clean sqlite db (string value) #sqlite_clean_db=clean.sqlite # # Options defined in cinder.wsgi # # Maximum line size of message headers to be accepted. # max_header_line may need to be increased when using large # tokens (typically those generated by the Keystone v3 API # with big service catalogs). (integer value) #max_header_line=16384 # Sets the value of TCP_KEEPALIVE (True/False) for each server # socket. (boolean value) #tcp_keepalive=true # Sets the value of TCP_KEEPIDLE in seconds for each server # socket. Not supported on OS X. (integer value) #tcp_keepidle=600 # Sets the value of TCP_KEEPINTVL in seconds for each server # socket. Not supported on OS X. (integer value) #tcp_keepalive_interval= # Sets the value of TCP_KEEPCNT for each server socket. Not # supported on OS X. (integer value) #tcp_keepalive_count= # CA certificate file to use to verify connecting clients # (string value) #ssl_ca_file= # Certificate file to use when starting the server securely # (string value) #ssl_cert_file= # Private key file to use when starting the server securely # (string value) #ssl_key_file= # # Options defined in cinder.api.common # # The maximum number of items that a collection resource # returns in a single response (integer value) #osapi_max_limit=1000 # Base URL that will be presented to users in links to the # OpenStack Volume API (string value) # Deprecated group/name - [DEFAULT]/osapi_compute_link_prefix #osapi_volume_base_URL= # # Options defined in cinder.api.middleware.auth # # Treat X-Forwarded-For as the canonical remote address. Only # enable this if you have a sanitizing proxy. (boolean value) #use_forwarded_for=false # # Options defined in cinder.api.middleware.sizelimit # # Max size for body of a request (integer value) #osapi_max_request_body_size=114688 # # Options defined in cinder.backup.driver # # Backup metadata version to be used when backing up volume # metadata. If this number is bumped, make sure the service # doing the restore supports the new version. (integer value) #backup_metadata_version=1 # # Options defined in cinder.backup.drivers.ceph # # Ceph configuration file to use. (string value) #backup_ceph_conf=/etc/ceph/ceph.conf # The Ceph user to connect with. Default here is to use the # same user as for Cinder volumes. If not using cephx this # should be set to None. (string value) #backup_ceph_user=cinder # The chunk size, in bytes, that a backup is broken into # before transfer to the Ceph object store. (integer value) #backup_ceph_chunk_size=134217728 # The Ceph pool where volume backups are stored. (string # value) #backup_ceph_pool=backups # RBD stripe unit to use when creating a backup image. # (integer value) #backup_ceph_stripe_unit=0 # RBD stripe count to use when creating a backup image. # (integer value) #backup_ceph_stripe_count=0 # If True, always discard excess bytes when restoring volumes # i.e. pad with zeroes. (boolean value) #restore_discard_excess_bytes=true # # Options defined in cinder.backup.drivers.swift # # The URL of the Swift endpoint (string value) #backup_swift_url= # Info to match when looking for swift in the service catalog. # Format is: separated values of the form: # :: - Only used if # backup_swift_url is unset (string value) #swift_catalog_info=object-store:swift:publicURL # Swift authentication mechanism (string value) #backup_swift_auth=per_user # Swift authentication version. Specify "1" for auth 1.0, or # "2" for auth 2.0 (string value) #backup_swift_auth_version=1 # Swift tenant/account name. Required when connecting to an # auth 2.0 system (string value) #backup_swift_tenant= # Swift user name (string value) #backup_swift_user= # Swift key for authentication (string value) #backup_swift_key= # The default Swift container to use (string value) #backup_swift_container=volumebackups # The size in bytes of Swift backup objects (integer value) #backup_swift_object_size=52428800 # The number of retries to make for Swift operations (integer # value) #backup_swift_retry_attempts=3 # The backoff time in seconds between Swift retries (integer # value) #backup_swift_retry_backoff=2 # Compression algorithm (None to disable) (string value) #backup_compression_algorithm=zlib # # Options defined in cinder.backup.drivers.tsm # # Volume prefix for the backup id when backing up to TSM # (string value) #backup_tsm_volume_prefix=backup # TSM password for the running username (string value) #backup_tsm_password=password # Enable or Disable compression for backups (boolean value) #backup_tsm_compression=true # # Options defined in cinder.backup.manager # # Driver to use for backups. (string value) # Deprecated group/name - [DEFAULT]/backup_service #backup_driver=cinder.backup.drivers.swift # # Options defined in cinder.common.config # # File name for the paste.deploy config for cinder-api (string # value) #api_paste_config=api-paste.ini # Top-level directory for maintaining cinder's state (string # value) # Deprecated group/name - [DEFAULT]/pybasedir #state_path=/var/lib/cinder # IP address of this host (string value) #my_ip=10.0.0.1 # Default glance host name or IP (string value) #glance_host=$my_ip # Default glance port (integer value) #glance_port=9292 # A list of the glance API servers available to cinder # ([hostname|ip]:port) (list value) #glance_api_servers=$glance_host:$glance_port # Version of the glance API to use (integer value) #glance_api_version=1 # Number retries when downloading an image from glance # (integer value) #glance_num_retries=0 # Allow to perform insecure SSL (https) requests to glance # (boolean value) #glance_api_insecure=false # Enables or disables negotiation of SSL layer compression. In # some cases disabling compression can improve data # throughput, such as when high network bandwidth is available # and you use compressed image formats like qcow2. (boolean # value) #glance_api_ssl_compression=false # Location of ca certificates file to use for glance client # requests. (string value) #glance_ca_certificates_file= # http/https timeout value for glance operations. If no value # (None) is supplied here, the glanceclient default value is # used. (integer value) #glance_request_timeout= # The topic that scheduler nodes listen on (string value) #scheduler_topic=cinder-scheduler # The topic that volume nodes listen on (string value) #volume_topic=cinder-volume # The topic that volume backup nodes listen on (string value) #backup_topic=cinder-backup # DEPRECATED: Deploy v1 of the Cinder API. (boolean value) #enable_v1_api=true # Deploy v2 of the Cinder API. (boolean value) #enable_v2_api=true # Enables or disables rate limit of the API. (boolean value) #api_rate_limit=true # Specify list of extensions to load when using # osapi_volume_extension option with # cinder.api.contrib.select_extensions (list value) #osapi_volume_ext_list= # osapi volume extension to load (multi valued) #osapi_volume_extension=cinder.api.contrib.standard_extensions # Full class name for the Manager for volume (string value) #volume_manager=cinder.volume.manager.VolumeManager # Full class name for the Manager for volume backup (string # value) #backup_manager=cinder.backup.manager.BackupManager # Full class name for the Manager for scheduler (string value) #scheduler_manager=cinder.scheduler.manager.SchedulerManager # Name of this node. This can be an opaque identifier. It is # not necessarily a host name, FQDN, or IP address. (string # value) #host=cinder # Availability zone of this node (string value) #storage_availability_zone=nova # Default availability zone for new volumes. If not set, the # storage_availability_zone option value is used as the # default for new volumes. (string value) #default_availability_zone= # Default volume type to use (string value) #default_volume_type= # Time period for which to generate volume usages. The options # are hour, day, month, or year. (string value) #volume_usage_audit_period=month # Path to the rootwrap configuration file to use for running # commands as root (string value) #rootwrap_config=/etc/cinder/rootwrap.conf # Enable monkey patching (boolean value) #monkey_patch=false # List of modules/decorators to monkey patch (list value) #monkey_patch_modules= # Maximum time since last check-in for a service to be # considered up (integer value) #service_down_time=60 # The full class name of the volume API class to use (string # value) #volume_api_class=cinder.volume.api.API # The full class name of the volume backup API class (string # value) #backup_api_class=cinder.backup.api.API # The strategy to use for auth. Supports noauth, keystone, and # deprecated. (string value) #auth_strategy=noauth # A list of backend names to use. These backend names should # be backed by a unique [CONFIG] group with its options (list # value) #enabled_backends= # Whether snapshots count against GigaByte quota (boolean # value) #no_snapshot_gb_quota=false # The full class name of the volume transfer API class (string # value) #transfer_api_class=cinder.transfer.api.API # The full class name of the volume replication API class # (string value) #replication_api_class=cinder.replication.api.API # The full class name of the consistencygroup API class # (string value) #consistencygroup_api_class=cinder.consistencygroup.api.API # # Options defined in cinder.compute # # The full class name of the compute API class to use (string # value) #compute_api_class=cinder.compute.nova.API # # Options defined in cinder.compute.nova # # Match this value when searching for nova in the service # catalog. Format is: separated values of the form: # :: (string value) #nova_catalog_info=compute:nova:publicURL # Same as nova_catalog_info, but for admin endpoint. (string # value) #nova_catalog_admin_info=compute:nova:adminURL # Override service catalog lookup with template for nova # endpoint e.g. http://localhost:8774/v2/%(project_id)s # (string value) #nova_endpoint_template= # Same as nova_endpoint_template, but for admin endpoint. # (string value) #nova_endpoint_admin_template= # Region name of this node (string value) #os_region_name= # Location of ca certificates file to use for nova client # requests. (string value) #nova_ca_certificates_file= # Allow to perform insecure SSL requests to nova (boolean # value) #nova_api_insecure=false # # Options defined in cinder.db.api # # The backend to use for db (string value) #db_backend=sqlalchemy # Services to be added to the available pool on create # (boolean value) #enable_new_services=true # Template string to be used to generate volume names (string # value) #volume_name_template=volume-%s # Template string to be used to generate snapshot names # (string value) #snapshot_name_template=snapshot-%s # Template string to be used to generate backup names (string # value) #backup_name_template=backup-%s # # Options defined in cinder.db.base # # Driver to use for database access (string value) #db_driver=cinder.db # # Options defined in cinder.image.glance # # Default core properties of image (list value) #glance_core_properties=checksum,container_format,disk_format,image_name,image_id,min_disk,min_ram,name,size # A list of url schemes that can be downloaded directly via # the direct_url. Currently supported schemes: [file]. (list # value) #allowed_direct_url_schemes= # # Options defined in cinder.image.image_utils # # Directory used for temporary storage during image conversion # (string value) #image_conversion_dir=$state_path/conversion # # Options defined in cinder.openstack.common.eventlet_backdoor # # Enable eventlet backdoor. Acceptable values are 0, , # and :, where 0 results in listening on a random # tcp port number; results in listening on the # specified port number (and not enabling backdoor if that # port is in use); and : results in listening on # the smallest unused port number within the specified range # of port numbers. The chosen port is displayed in the # service's log file. (string value) #backdoor_port= # # Options defined in cinder.openstack.common.lockutils # # Whether to disable inter-process locks (boolean value) #disable_process_locking=false # Directory to use for lock files. Default to a temp directory # (string value) #lock_path= # # Options defined in cinder.openstack.common.log # # Print debugging output (set logging level to DEBUG instead # of default WARNING level). (boolean value) #debug=false # Print more verbose output (set logging level to INFO instead # of default WARNING level). (boolean value) #verbose=false # Log output to standard error. (boolean value) #use_stderr=true # Format string to use for log messages with context. (string # value) #logging_context_format_string=%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s # Format string to use for log messages without context. # (string value) #logging_default_format_string=%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s # Data to append to log format when level is DEBUG. (string # value) #logging_debug_format_suffix=%(funcName)s %(pathname)s:%(lineno)d # Prefix each line of exception output with this format. # (string value) #logging_exception_prefix=%(asctime)s.%(msecs)03d %(process)d TRACE %(name)s %(instance)s # List of logger=LEVEL pairs. (list value) #default_log_levels=amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN # Enables or disables publication of error events. (boolean # value) #publish_errors=false # Enables or disables fatal status of deprecations. (boolean # value) #fatal_deprecations=false # The format for an instance that is passed with the log # message. (string value) #instance_format="[instance: %(uuid)s] " # The format for an instance UUID that is passed with the log # message. (string value) #instance_uuid_format="[instance: %(uuid)s] " # The name of a logging configuration file. This file is # appended to any existing logging configuration files. For # details about logging configuration files, see the Python # logging module documentation. (string value) # Deprecated group/name - [DEFAULT]/log_config #log_config_append= # DEPRECATED. A logging.Formatter log message format string # which may use any of the available logging.LogRecord # attributes. This option is deprecated. Please use # logging_context_format_string and # logging_default_format_string instead. (string value) #log_format= # Format string for %%(asctime)s in log records. Default: # %(default)s . (string value) #log_date_format=%Y-%m-%d %H:%M:%S # (Optional) Name of log file to output to. If no default is # set, logging will go to stdout. (string value) # Deprecated group/name - [DEFAULT]/logfile #log_file= # (Optional) The base directory used for relative --log-file # paths. (string value) # Deprecated group/name - [DEFAULT]/logdir #log_dir= # Use syslog for logging. Existing syslog format is DEPRECATED # during I, and will change in J to honor RFC5424. (boolean # value) #use_syslog=false # (Optional) Enables or disables syslog rfc5424 format for # logging. If enabled, prefixes the MSG part of the syslog # message with APP-NAME (RFC5424). The format without the APP- # NAME is deprecated in I, and will be removed in J. (boolean # value) #use_syslog_rfc_format=false # Syslog facility to receive log lines. (string value) #syslog_log_facility=LOG_USER # # Options defined in cinder.openstack.common.periodic_task # # Some periodic tasks can be run in a separate process. Should # we run them here? (boolean value) #run_external_periodic_tasks=true # # Options defined in cinder.openstack.common.policy # # The JSON file that defines policies. (string value) #policy_file=policy.json # Default rule. Enforced when a requested rule is not found. # (string value) #policy_default_rule=default # # Options defined in cinder.scheduler.driver # # The scheduler host manager class to use (string value) #scheduler_host_manager=cinder.scheduler.host_manager.HostManager # Maximum number of attempts to schedule an volume (integer # value) #scheduler_max_attempts=3 # # Options defined in cinder.scheduler.host_manager # # Which filter class names to use for filtering hosts when not # specified in the request. (list value) #scheduler_default_filters=AvailabilityZoneFilter,CapacityFilter,CapabilitiesFilter # Which weigher class names to use for weighing hosts. (list # value) #scheduler_default_weighers=CapacityWeigher # # Options defined in cinder.scheduler.manager # # Default scheduler driver to use (string value) #scheduler_driver=cinder.scheduler.filter_scheduler.FilterScheduler # # Options defined in cinder.scheduler.scheduler_options # # Absolute path to scheduler configuration JSON file. (string # value) #scheduler_json_config_location= # # Options defined in cinder.scheduler.simple # # This configure option has been deprecated along with the # SimpleScheduler. New scheduler is able to gather capacity # information for each host, thus setting the maximum number # of volume gigabytes for host is no longer needed. It's safe # to remove this configure from cinder.conf. (integer value) #max_gigabytes=10000 # # Options defined in cinder.scheduler.weights.capacity # # Multiplier used for weighing volume capacity. Negative # numbers mean to stack vs spread. (floating point value) #capacity_weight_multiplier=1.0 # Multiplier used for weighing volume capacity. Negative # numbers mean to stack vs spread. (floating point value) #allocated_capacity_weight_multiplier=-1.0 # # Options defined in cinder.scheduler.weights.volume_number # # Multiplier used for weighing volume number. Negative numbers # mean to spread vs stack. (floating point value) #volume_number_multiplier=-1.0 # # Options defined in cinder.transfer.api # # The number of characters in the salt. (integer value) #volume_transfer_salt_length=8 # The number of characters in the autogenerated auth key. # (integer value) #volume_transfer_key_length=16 # # Options defined in cinder.volume.api # # Cache volume availability zones in memory for the provided # duration in seconds (integer value) #az_cache_duration=3600 # Create volume from snapshot at the host where snapshot # resides (boolean value) #snapshot_same_host=true # Ensure that the new volumes are the same AZ as snapshot or # source volume (boolean value) #cloned_volume_same_az=true # # Options defined in cinder.volume.driver # # The maximum number of times to rescan iSER targetto find # volume (integer value) #num_iser_scan_tries=3 # The maximum number of iSER target IDs per host (integer # value) #iser_num_targets=100 # Prefix for iSER volumes (string value) #iser_target_prefix=iqn.2010-10.org.iser.openstack: # The IP address that the iSER daemon is listening on (string # value) #iser_ip_address=$my_ip # The port that the iSER daemon is listening on (integer # value) #iser_port=3260 # The name of the iSER target user-land tool to use (string # value) #iser_helper=tgtadm # Number of times to attempt to run flakey shell commands # (integer value) #num_shell_tries=3 # The percentage of backend capacity is reserved (integer # value) #reserved_percentage=0 # The maximum number of iSCSI target IDs per host (integer # value) #iscsi_num_targets=100 # Prefix for iSCSI volumes (string value) #iscsi_target_prefix=iqn.2010-10.org.openstack: # The IP address that the iSCSI daemon is listening on (string # value) #iscsi_ip_address=$my_ip # The port that the iSCSI daemon is listening on (integer # value) #iscsi_port=3260 # The maximum number of times to rescan targets to find volume # (integer value) # Deprecated group/name - [DEFAULT]/num_iscsi_scan_tries #num_volume_device_scan_tries=3 # The backend name for a given driver implementation (string # value) #volume_backend_name= # Do we attach/detach volumes in cinder using multipath for # volume to image and image to volume transfers? (boolean # value) #use_multipath_for_image_xfer=false # Method used to wipe old volumes (valid options are: none, # zero, shred) (string value) #volume_clear=zero # Size in MiB to wipe at start of old volumes. 0 => all # (integer value) #volume_clear_size=0 # The flag to pass to ionice to alter the i/o priority of the # process used to zero a volume after deletion, for example # "-c3" for idle only priority. (string value) #volume_clear_ionice= # iSCSI target user-land tool to use. tgtadm is default, use # lioadm for LIO iSCSI support, iseradm for the ISER protocol, # or fake for testing. (string value) #iscsi_helper=tgtadm # Volume configuration file storage directory (string value) #volumes_dir=$state_path/volumes # IET configuration file (string value) #iet_conf=/etc/iet/ietd.conf # Comma-separated list of initiator IQNs allowed to connect to # the iSCSI target. (From Nova compute nodes.) (string value) #lio_initiator_iqns= # Sets the behavior of the iSCSI target to either perform # blockio or fileio optionally, auto can be set and Cinder # will autodetect type of backing device (string value) #iscsi_iotype=fileio # The default block size used when copying/clearing volumes # (string value) #volume_dd_blocksize=1M # The blkio cgroup name to be used to limit bandwidth of # volume copy (string value) #volume_copy_blkio_cgroup_name=cinder-volume-copy # The upper limit of bandwidth of volume copy. 0 => unlimited # (integer value) #volume_copy_bps_limit=0 # Sets the behavior of the iSCSI target to either perform # write-back(on) or write-through(off). This parameter is # valid if iscsi_helper is set to tgtadm or iseradm. (string # value) #iscsi_write_cache=on # The path to the client certificate key for verification, if # the driver supports it. (string value) #driver_client_cert_key= # The path to the client certificate for verification, if the # driver supports it. (string value) #driver_client_cert= # # Options defined in cinder.volume.drivers.block_device # # List of all available devices (list value) #available_devices= # # Options defined in cinder.volume.drivers.coraid # # IP address of Coraid ESM (string value) #coraid_esm_address= # User name to connect to Coraid ESM (string value) #coraid_user=admin # Name of group on Coraid ESM to which coraid_user belongs # (must have admin privilege) (string value) #coraid_group=admin # Password to connect to Coraid ESM (string value) #coraid_password=password # Volume Type key name to store ESM Repository Name (string # value) #coraid_repository_key=coraid_repository # # Options defined in cinder.volume.drivers.datera # # Datera API token. (string value) #datera_api_token= # Datera API port. (string value) #datera_api_port=7717 # Datera API version. (string value) #datera_api_version=1 # Number of replicas to create of an inode. (string value) #datera_num_replicas=3 # # Options defined in cinder.volume.drivers.emc.emc_vmax_common # # use this file for cinder emc plugin config data (string # value) #cinder_emc_config_file=/etc/cinder/cinder_emc_config.xml # # Options defined in cinder.volume.drivers.emc.emc_vnx_cli # # VNX authentication scope type. (string value) #storage_vnx_authentication_type=global # Directory path that contains the VNX security file. Make # sure the security file is generated first. (string value) #storage_vnx_security_file_dir= # Naviseccli Path. (string value) #naviseccli_path= # Storage pool name. (string value) #storage_vnx_pool_name= # VNX secondary SP IP Address. (string value) #san_secondary_ip= # Default timeout for CLI operations in minutes. For example, # LUN migration is a typical long running operation, which # depends on the LUN size and the load of the array. An upper # bound in the specific deployment can be set to avoid # unnecessary long wait. By default, it is 365 days long. # (integer value) #default_timeout=525600 # Default max number of LUNs in a storage group. By default, # the value is 255. (integer value) #max_luns_per_storage_group=255 # To destroy storage group when the last LUN is removed from # it. By default, the value is False. (boolean value) #destroy_empty_storage_group=false # Mapping between hostname and its iSCSI initiator IP # addresses. (string value) #iscsi_initiators= # Automatically register initiators. By default, the value is # False. (boolean value) #initiator_auto_registration=false # # Options defined in cinder.volume.drivers.eqlx # # Group name to use for creating volumes (string value) #eqlx_group_name=group-0 # Timeout for the Group Manager cli command execution (integer # value) #eqlx_cli_timeout=30 # Maximum retry count for reconnection (integer value) #eqlx_cli_max_retries=5 # Use CHAP authentication for targets? (boolean value) #eqlx_use_chap=false # Existing CHAP account name (string value) #eqlx_chap_login=admin # Password for specified CHAP account name (string value) #eqlx_chap_password=password # Pool in which volumes will be created (string value) #eqlx_pool=default # # Options defined in cinder.volume.drivers.fujitsu_eternus_dx_common # # The configuration file for the Cinder SMI-S driver (string # value) #cinder_smis_config_file=/etc/cinder/cinder_fujitsu_eternus_dx.xml # # Options defined in cinder.volume.drivers.fusionio.ioControl # # amount of time wait for iSCSI target to come online (integer # value) #fusionio_iocontrol_targetdelay=5 # number of retries for GET operations (integer value) #fusionio_iocontrol_retry=3 # verify the array certificate on each transaction (boolean # value) #fusionio_iocontrol_verify_cert=true # # Options defined in cinder.volume.drivers.glusterfs # # File with the list of available gluster shares (string # value) #glusterfs_shares_config=/etc/cinder/glusterfs_shares # Create volumes as sparsed files which take no space.If set # to False volume is created as regular file.In such case # volume creation takes a lot of time. (boolean value) #glusterfs_sparsed_volumes=true # Create volumes as QCOW2 files rather than raw files. # (boolean value) #glusterfs_qcow2_volumes=false # Base dir containing mount points for gluster shares. (string # value) #glusterfs_mount_point_base=$state_path/mnt # # Options defined in cinder.volume.drivers.hds.hds # # The configuration file for the Cinder HDS driver for HUS # (string value) #hds_cinder_config_file=/opt/hds/hus/cinder_hus_conf.xml # # Options defined in cinder.volume.drivers.hds.iscsi # # Configuration file for HDS iSCSI cinder plugin (string # value) #hds_hnas_iscsi_config_file=/opt/hds/hnas/cinder_iscsi_conf.xml # # Options defined in cinder.volume.drivers.hds.nfs # # Configuration file for HDS NFS cinder plugin (string value) #hds_hnas_nfs_config_file=/opt/hds/hnas/cinder_nfs_conf.xml # # Options defined in cinder.volume.drivers.hitachi.hbsd_common # # Serial number of storage system (string value) #hitachi_serial_number= # Name of an array unit (string value) #hitachi_unit_name= # Pool ID of storage system (integer value) #hitachi_pool_id= # Thin pool ID of storage system (integer value) #hitachi_thin_pool_id= # Range of logical device of storage system (string value) #hitachi_ldev_range= # Default copy method of storage system (string value) #hitachi_default_copy_method=FULL # Copy speed of storage system (integer value) #hitachi_copy_speed=3 # Interval to check copy (integer value) #hitachi_copy_check_interval=3 # Interval to check copy asynchronously (integer value) #hitachi_async_copy_check_interval=10 # Control port names for HostGroup or iSCSI Target (string # value) #hitachi_target_ports= # Range of group number (string value) #hitachi_group_range= # Request for creating HostGroup or iSCSI Target (boolean # value) #hitachi_group_request=false # # Options defined in cinder.volume.drivers.hitachi.hbsd_fc # # Request for FC Zone creating HostGroup (boolean value) #hitachi_zoning_request=false # # Options defined in cinder.volume.drivers.hitachi.hbsd_horcm # # Instance numbers for HORCM (string value) #hitachi_horcm_numbers=200,201 # Username of storage system for HORCM (string value) #hitachi_horcm_user= # Password of storage system for HORCM (string value) #hitachi_horcm_password= # Add to HORCM configuration (boolean value) #hitachi_horcm_add_conf=true # # Options defined in cinder.volume.drivers.hitachi.hbsd_iscsi # # Add CHAP user (boolean value) #hitachi_add_chap_user=false # iSCSI authentication method (string value) #hitachi_auth_method= # iSCSI authentication username (string value) #hitachi_auth_user=HBSD-CHAP-user # iSCSI authentication password (string value) #hitachi_auth_password=HBSD-CHAP-password # # Options defined in cinder.volume.drivers.huawei # # The configuration file for the Cinder Huawei driver (string # value) #cinder_huawei_conf_file=/etc/cinder/cinder_huawei_conf.xml # # Options defined in cinder.volume.drivers.ibm.gpfs # # Specifies the path of the GPFS directory where Block Storage # volume and snapshot files are stored. (string value) #gpfs_mount_point_base= # Specifies the path of the Image service repository in GPFS. # Leave undefined if not storing images in GPFS. (string # value) #gpfs_images_dir= # Specifies the type of image copy to be used. Set this when # the Image service repository also uses GPFS so that image # files can be transferred efficiently from the Image service # to the Block Storage service. There are two valid values: # "copy" specifies that a full copy of the image is made; # "copy_on_write" specifies that copy-on-write optimization # strategy is used and unmodified blocks of the image file are # shared efficiently. (string value) #gpfs_images_share_mode= # Specifies an upper limit on the number of indirections # required to reach a specific block due to snapshots or # clones. A lengthy chain of copy-on-write snapshots or # clones can have a negative impact on performance, but # improves space utilization. 0 indicates unlimited clone # depth. (integer value) #gpfs_max_clone_depth=0 # Specifies that volumes are created as sparse files which # initially consume no space. If set to False, the volume is # created as a fully allocated file, in which case, creation # may take a significantly longer time. (boolean value) #gpfs_sparse_volumes=true # Specifies the storage pool that volumes are assigned to. By # default, the system storage pool is used. (string value) #gpfs_storage_pool=system # # Options defined in cinder.volume.drivers.ibm.ibmnas # # IP address or Hostname of NAS system. (string value) #nas_ip= # User name to connect to NAS system. (string value) #nas_login=admin # Password to connect to NAS system. (string value) #nas_password= # SSH port to use to connect to NAS system. (integer value) #nas_ssh_port=22 # Filename of private key to use for SSH authentication. # (string value) #nas_private_key= # IBMNAS platform type to be used as backend storage; valid # values are - v7ku : for using IBM Storwize V7000 Unified, # sonas : for using IBM Scale Out NAS, gpfs-nas : for using # NFS based IBM GPFS deployments. (string value) #ibmnas_platform_type=v7ku # # Options defined in cinder.volume.drivers.ibm.storwize_svc # # Storage system storage pool for volumes (string value) #storwize_svc_volpool_name=volpool # Storage system space-efficiency parameter for volumes # (percentage) (integer value) #storwize_svc_vol_rsize=2 # Storage system threshold for volume capacity warnings # (percentage) (integer value) #storwize_svc_vol_warning=0 # Storage system autoexpand parameter for volumes (True/False) # (boolean value) #storwize_svc_vol_autoexpand=true # Storage system grain size parameter for volumes # (32/64/128/256) (integer value) #storwize_svc_vol_grainsize=256 # Storage system compression option for volumes (boolean # value) #storwize_svc_vol_compression=false # Enable Easy Tier for volumes (boolean value) #storwize_svc_vol_easytier=true # The I/O group in which to allocate volumes (integer value) #storwize_svc_vol_iogrp=0 # Maximum number of seconds to wait for FlashCopy to be # prepared. Maximum value is 600 seconds (10 minutes) (integer # value) #storwize_svc_flashcopy_timeout=120 # Connection protocol (iSCSI/FC) (string value) #storwize_svc_connection_protocol=iSCSI # Configure CHAP authentication for iSCSI connections # (Default: Enabled) (boolean value) #storwize_svc_iscsi_chap_enabled=true # Connect with multipath (FC only; iSCSI multipath is # controlled by Nova) (boolean value) #storwize_svc_multipath_enabled=false # Allows vdisk to multi host mapping (boolean value) #storwize_svc_multihostmap_enabled=true # Indicate whether svc driver is compatible for NPIV setup. If # it is compatible, it will allow no wwpns being returned on # get_conn_fc_wwpns during initialize_connection (boolean # value) #storwize_svc_npiv_compatibility_mode=false # Allow tenants to specify QOS on create (boolean value) #storwize_svc_allow_tenant_qos=false # If operating in stretched cluster mode, specify the name of # the pool in which mirrored copies are stored.Example: # "pool2" (string value) #storwize_svc_stretched_cluster_partner= # # Options defined in cinder.volume.drivers.ibm.xiv_ds8k # # Proxy driver that connects to the IBM Storage Array (string # value) #xiv_ds8k_proxy=xiv_ds8k_openstack.nova_proxy.XIVDS8KNovaProxy # Connection type to the IBM Storage Array # (fibre_channel|iscsi) (string value) #xiv_ds8k_connection_type=iscsi # CHAP authentication mode, effective only for iscsi # (disabled|enabled) (string value) #xiv_chap=disabled # # Options defined in cinder.volume.drivers.lvm # # Name for the VG that will contain exported volumes (string # value) #volume_group=cinder-volumes # If >0, create LVs with multiple mirrors. Note that this # requires lvm_mirrors + 2 PVs with available space (integer # value) #lvm_mirrors=0 # Type of LVM volumes to deploy; (default or thin) (string # value) #lvm_type=default # # Options defined in cinder.volume.drivers.netapp.options # # The vFiler unit on which provisioning of block storage # volumes will be done. This option is only used by the driver # when connecting to an instance with a storage family of Data # ONTAP operating in 7-Mode and the storage protocol selected # is iSCSI. Only use this option when utilizing the MultiStore # feature on the NetApp storage system. (string value) #netapp_vfiler= # Administrative user account name used to access the storage # system or proxy server. (string value) #netapp_login= # Password for the administrative user account specified in # the netapp_login option. (string value) #netapp_password= # This option specifies the virtual storage server (Vserver) # name on the storage cluster on which provisioning of block # storage volumes should occur. If using the NFS storage # protocol, this parameter is mandatory for storage service # catalog support (utilized by Cinder volume type extra_specs # support). If this option is specified, the exports belonging # to the Vserver will only be used for provisioning in the # future. Block storage volumes on exports not belonging to # the Vserver specified by this option will continue to # function normally. (string value) #netapp_vserver= # The hostname (or IP address) for the storage system or proxy # server. (string value) #netapp_server_hostname= # The TCP port to use for communication with the storage # system or proxy server. Traditionally, port 80 is used for # HTTP and port 443 is used for HTTPS; however, this value # should be changed if an alternate port has been configured # on the storage system or proxy server. (integer value) #netapp_server_port=80 # This option is used to specify the path to the E-Series # proxy application on a proxy server. The value is combined # with the value of the netapp_transport_type, # netapp_server_hostname, and netapp_server_port options to # create the URL used by the driver to connect to the proxy # application. (string value) #netapp_webservice_path=/devmgr/v2 # This option is only utilized when the storage family is # configured to eseries. This option is used to restrict # provisioning to the specified controllers. Specify the value # of this option to be a comma separated list of controller # hostnames or IP addresses to be used for provisioning. # (string value) #netapp_controller_ips= # Password for the NetApp E-Series storage array. (string # value) #netapp_sa_password= # This option is used to restrict provisioning to the # specified storage pools. Only dynamic disk pools are # currently supported. Specify the value of this option to be # a comma separated list of disk pool names to be used for # provisioning. (string value) #netapp_storage_pools= # If the percentage of available space for an NFS share has # dropped below the value specified by this option, the NFS # image cache will be cleaned. (integer value) #thres_avl_size_perc_start=20 # When the percentage of available space on an NFS share has # reached the percentage specified by this option, the driver # will stop clearing files from the NFS image cache that have # not been accessed in the last M minutes, where M is the # value of the expiry_thres_minutes configuration option. # (integer value) #thres_avl_size_perc_stop=60 # This option specifies the threshold for last access time for # images in the NFS image cache. When a cache cleaning cycle # begins, images in the cache that have not been accessed in # the last M minutes, where M is the value of this parameter, # will be deleted from the cache to create free space on the # NFS share. (integer value) #expiry_thres_minutes=720 # This option specifies the path of the NetApp copy offload # tool binary. Ensure that the binary has execute permissions # set which allow the effective user of the cinder-volume # process to execute the file. (string value) #netapp_copyoffload_tool_path= # The quantity to be multiplied by the requested volume size # to ensure enough space is available on the virtual storage # server (Vserver) to fulfill the volume creation request. # (floating point value) #netapp_size_multiplier=1.2 # This option is only utilized when the storage protocol is # configured to use iSCSI. This option is used to restrict # provisioning to the specified controller volumes. Specify # the value of this option to be a comma separated list of # NetApp controller volume names to be used for provisioning. # (string value) #netapp_volume_list= # The storage family type used on the storage system; valid # values are ontap_7mode for using Data ONTAP operating in # 7-Mode, ontap_cluster for using clustered Data ONTAP, or # eseries for using E-Series. (string value) #netapp_storage_family=ontap_cluster # The storage protocol to be used on the data path with the # storage system; valid values are iscsi or nfs. (string # value) #netapp_storage_protocol= # The transport protocol used when communicating with the # storage system or proxy server. Valid values are http or # https. (string value) #netapp_transport_type=http # # Options defined in cinder.volume.drivers.nexenta.options # # IP address of Nexenta SA (string value) #nexenta_host= # HTTP port to connect to Nexenta REST API server (integer # value) #nexenta_rest_port=2000 # Use http or https for REST connection (default auto) (string # value) #nexenta_rest_protocol=auto # User name to connect to Nexenta SA (string value) #nexenta_user=admin # Password to connect to Nexenta SA (string value) #nexenta_password=nexenta # Nexenta target portal port (integer value) #nexenta_iscsi_target_portal_port=3260 # SA Pool that holds all volumes (string value) #nexenta_volume=cinder # IQN prefix for iSCSI targets (string value) #nexenta_target_prefix=iqn.1986-03.com.sun:02:cinder- # Prefix for iSCSI target groups on SA (string value) #nexenta_target_group_prefix=cinder/ # File with the list of available nfs shares (string value) #nexenta_shares_config=/etc/cinder/nfs_shares # Base directory that contains NFS share mount points (string # value) #nexenta_mount_point_base=$state_path/mnt # Enables or disables the creation of volumes as sparsed files # that take no space. If disabled (False), volume is created # as a regular file, which takes a long time. (boolean value) #nexenta_sparsed_volumes=true # Default compression value for new ZFS folders. (string # value) #nexenta_volume_compression=on # If set True cache NexentaStor appliance volroot option # value. (boolean value) #nexenta_nms_cache_volroot=true # Enable stream compression, level 1..9. 1 - gives best speed; # 9 - gives best compression. (integer value) #nexenta_rrmgr_compression=0 # TCP Buffer size in KiloBytes. (integer value) #nexenta_rrmgr_tcp_buf_size=4096 # Number of TCP connections. (integer value) #nexenta_rrmgr_connections=2 # Block size for volumes (default=blank means 8KB) (string # value) #nexenta_blocksize= # Enables or disables the creation of sparse volumes (boolean # value) #nexenta_sparse=false # # Options defined in cinder.volume.drivers.nfs # # File with the list of available nfs shares (string value) #nfs_shares_config=/etc/cinder/nfs_shares # Create volumes as sparsed files which take no space.If set # to False volume is created as regular file.In such case # volume creation takes a lot of time. (boolean value) #nfs_sparsed_volumes=true # Percent of ACTUAL usage of the underlying volume before no # new volumes can be allocated to the volume destination. # (floating point value) #nfs_used_ratio=0.95 # This will compare the allocated to available space on the # volume destination. If the ratio exceeds this number, the # destination will no longer be valid. (floating point value) #nfs_oversub_ratio=1.0 # Base dir containing mount points for nfs shares. (string # value) #nfs_mount_point_base=$state_path/mnt # Mount options passed to the nfs client. See section of the # nfs man page for details. (string value) #nfs_mount_options= # # Options defined in cinder.volume.drivers.nimble # # Nimble Controller pool name (string value) #nimble_pool_name=default # Nimble Subnet Label (string value) #nimble_subnet_label=* # # Options defined in cinder.volume.drivers.prophetstor.options # # DPL pool uuid in which DPL volumes are stored. (string # value) #dpl_pool= # DPL port number. (integer value) #dpl_port=8357 # # Options defined in cinder.volume.drivers.pure # # REST API authorization token. (string value) #pure_api_token= # # Options defined in cinder.volume.drivers.rbd # # The RADOS pool where rbd volumes are stored (string value) #rbd_pool=rbd # The RADOS client name for accessing rbd volumes - only set # when using cephx authentication (string value) #rbd_user= # Path to the ceph configuration file (string value) #rbd_ceph_conf= # Flatten volumes created from snapshots to remove dependency # from volume to snapshot (boolean value) #rbd_flatten_volume_from_snapshot=false # The libvirt uuid of the secret for the rbd_user volumes # (string value) #rbd_secret_uuid= # Directory where temporary image files are stored when the # volume driver does not write them directly to the volume. # (string value) #volume_tmp_dir= # Maximum number of nested volume clones that are taken before # a flatten occurs. Set to 0 to disable cloning. (integer # value) #rbd_max_clone_depth=5 # Volumes will be chunked into objects of this size (in # megabytes). (integer value) #rbd_store_chunk_size=4 # Timeout value (in seconds) used when connecting to ceph # cluster. If value < 0, no timeout is set and default # librados value is used. (integer value) #rados_connect_timeout=-1 # # Options defined in cinder.volume.drivers.remotefs # # IP address or Hostname of NAS system. (string value) #nas_ip= # User name to connect to NAS system. (string value) #nas_login=admin # Password to connect to NAS system. (string value) #nas_password= # SSH port to use to connect to NAS system. (integer value) #nas_ssh_port=22 # Filename of private key to use for SSH authentication. # (string value) #nas_private_key= # # Options defined in cinder.volume.drivers.san.hp.hp_3par_common # # 3PAR WSAPI Server Url like https://<3par ip>:8080/api/v1 # (string value) #hp3par_api_url= # 3PAR Super user username (string value) #hp3par_username= # 3PAR Super user password (string value) #hp3par_password= # The CPG to use for volume creation (string value) #hp3par_cpg=OpenStack # The CPG to use for Snapshots for volumes. If empty # hp3par_cpg will be used (string value) #hp3par_cpg_snap= # The time in hours to retain a snapshot. You can't delete it # before this expires. (string value) #hp3par_snapshot_retention= # The time in hours when a snapshot expires and is deleted. # This must be larger than expiration (string value) #hp3par_snapshot_expiration= # Enable HTTP debugging to 3PAR (boolean value) #hp3par_debug=false # List of target iSCSI addresses to use. (list value) #hp3par_iscsi_ips= # Enable CHAP authentication for iSCSI connections. (boolean # value) #hp3par_iscsi_chap_enabled=false # # Options defined in cinder.volume.drivers.san.hp.hp_lefthand_rest_proxy # # HP LeftHand WSAPI Server Url like https://:8081/lhos (string value) #hplefthand_api_url= # HP LeftHand Super user username (string value) #hplefthand_username= # HP LeftHand Super user password (string value) #hplefthand_password= # HP LeftHand cluster name (string value) #hplefthand_clustername= # Configure CHAP authentication for iSCSI connections # (Default: Disabled) (boolean value) #hplefthand_iscsi_chap_enabled=false # Enable HTTP debugging to LeftHand (boolean value) #hplefthand_debug=false # # Options defined in cinder.volume.drivers.san.hp.hp_msa_common # # The VDisk to use for volume creation. (string value) #msa_vdisk=OpenStack # # Options defined in cinder.volume.drivers.san.san # # Use thin provisioning for SAN volumes? (boolean value) #san_thin_provision=true # IP address of SAN controller (string value) #san_ip= # Username for SAN controller (string value) #san_login=admin # Password for SAN controller (string value) #san_password= # Filename of private key to use for SSH authentication # (string value) #san_private_key= # Cluster name to use for creating volumes (string value) #san_clustername= # SSH port to use with SAN (integer value) #san_ssh_port=22 # Execute commands locally instead of over SSH; use if the # volume service is running on the SAN device (boolean value) #san_is_local=false # SSH connection timeout in seconds (integer value) #ssh_conn_timeout=30 # Minimum ssh connections in the pool (integer value) #ssh_min_pool_conn=1 # Maximum ssh connections in the pool (integer value) #ssh_max_pool_conn=5 # # Options defined in cinder.volume.drivers.san.solaris # # The ZFS path under which to create zvols for volumes. # (string value) #san_zfs_volume_base=rpool/ # # Options defined in cinder.volume.drivers.scality # # Path or URL to Scality SOFS configuration file (string # value) #scality_sofs_config= # Base dir where Scality SOFS shall be mounted (string value) #scality_sofs_mount_point=$state_path/scality # Path from Scality SOFS root to volume dir (string value) #scality_sofs_volume_dir=cinder/volumes # # Options defined in cinder.volume.drivers.smbfs # # File with the list of available smbfs shares. (string value) #smbfs_shares_config=/etc/cinder/smbfs_shares # Default format that will be used when creating volumes if no # volume format is specified. Can be set to: raw, qcow2, vhd # or vhdx. (string value) #smbfs_default_volume_format=qcow2 # Create volumes as sparsed files which take no space rather # than regular files when using raw format, in which case # volume creation takes lot of time. (boolean value) #smbfs_sparsed_volumes=true # Percent of ACTUAL usage of the underlying volume before no # new volumes can be allocated to the volume destination. # (floating point value) #smbfs_used_ratio=0.95 # This will compare the allocated to available space on the # volume destination. If the ratio exceeds this number, the # destination will no longer be valid. (floating point value) #smbfs_oversub_ratio=1.0 # Base dir containing mount points for smbfs shares. (string # value) #smbfs_mount_point_base=$state_path/mnt # Mount options passed to the smbfs client. See mount.cifs man # page for details. (string value) #smbfs_mount_options=noperm,file_mode=0775,dir_mode=0775 # # Options defined in cinder.volume.drivers.solidfire # # Set 512 byte emulation on volume creation; (boolean value) #sf_emulate_512=true # Allow tenants to specify QOS on create (boolean value) #sf_allow_tenant_qos=false # Create SolidFire accounts with this prefix. Any string can # be used here, but the string "hostname" is special and will # create a prefix using the cinder node hostsname (previous # default behavior). The default is NO prefix. (string value) #sf_account_prefix= # SolidFire API port. Useful if the device api is behind a # proxy on a different port. (integer value) #sf_api_port=443 # # Options defined in cinder.volume.drivers.vmware.vmdk # # IP address for connecting to VMware ESX/VC server. (string # value) #vmware_host_ip= # Username for authenticating with VMware ESX/VC server. # (string value) #vmware_host_username= # Password for authenticating with VMware ESX/VC server. # (string value) #vmware_host_password= # Optional VIM service WSDL Location e.g # http:///vimService.wsdl. Optional over-ride to # default location for bug work-arounds. (string value) #vmware_wsdl_location= # Number of times VMware ESX/VC server API must be retried # upon connection related issues. (integer value) #vmware_api_retry_count=10 # The interval (in seconds) for polling remote tasks invoked # on VMware ESX/VC server. (floating point value) #vmware_task_poll_interval=0.5 # Name for the folder in the VC datacenter that will contain # cinder volumes. (string value) #vmware_volume_folder=cinder-volumes # Timeout in seconds for VMDK volume transfer between Cinder # and Glance. (integer value) #vmware_image_transfer_timeout_secs=7200 # Max number of objects to be retrieved per batch. Query # results will be obtained in batches from the server and not # in one shot. Server may still limit the count to something # less than the configured value. (integer value) #vmware_max_objects_retrieval=100 # Optional string specifying the VMware VC server version. The # driver attempts to retrieve the version from VMware VC # server. Set this configuration only if you want to override # the VC server version. (string value) #vmware_host_version= # Directory where virtual disks are stored during volume # backup and restore. (string value) #vmware_tmp_dir=/tmp # # Options defined in cinder.volume.drivers.windows.windows # # Path to store VHD backed volumes (string value) #windows_iscsi_lun_path=C:\iSCSIVirtualDisks # # Options defined in cinder.volume.drivers.zadara # # Management IP of Zadara VPSA (string value) #zadara_vpsa_ip= # Zadara VPSA port number (string value) #zadara_vpsa_port= # Use SSL connection (boolean value) #zadara_vpsa_use_ssl=false # User name for the VPSA (string value) #zadara_user= # Password for the VPSA (string value) #zadara_password= # Name of VPSA storage pool for volumes (string value) #zadara_vpsa_poolname= # Default thin provisioning policy for volumes (boolean value) #zadara_vol_thin=true # Default encryption policy for volumes (boolean value) #zadara_vol_encrypt=false # Default template for VPSA volume names (string value) #zadara_vol_name_template=OS_%s # Automatically detach from servers on volume delete (boolean # value) #zadara_vpsa_auto_detach_on_delete=true # Don't halt on deletion of non-existing volumes (boolean # value) #zadara_vpsa_allow_nonexistent_delete=true # # Options defined in cinder.volume.drivers.zfssa.zfssaiscsi # # Storage pool name. (string value) #zfssa_pool= # Project name. (string value) #zfssa_project= # Block size: 512, 1k, 2k, 4k, 8k, 16k, 32k, 64k, 128k. # (string value) #zfssa_lun_volblocksize=8k # Flag to enable sparse (thin-provisioned): True, False. # (boolean value) #zfssa_lun_sparse=false # Data compression-off, lzjb, gzip-2, gzip, gzip-9. (string # value) #zfssa_lun_compression= # Synchronous write bias-latency, throughput. (string value) #zfssa_lun_logbias= # iSCSI initiator group. (string value) #zfssa_initiator_group= # iSCSI initiator IQNs. (comma separated) (string value) #zfssa_initiator= # iSCSI initiator CHAP user. (string value) #zfssa_initiator_user= # iSCSI initiator CHAP password. (string value) #zfssa_initiator_password= # iSCSI target group name. (string value) #zfssa_target_group=tgt-grp # iSCSI target CHAP user. (string value) #zfssa_target_user= # iSCSI target CHAP password. (string value) #zfssa_target_password= # iSCSI target portal (Data-IP:Port, w.x.y.z:3260). (string # value) #zfssa_target_portal= # Network interfaces of iSCSI targets. (comma separated) # (string value) #zfssa_target_interfaces= # REST connection timeout. (seconds) (integer value) #zfssa_rest_timeout= # # Options defined in cinder.volume.manager # # Driver to use for volume creation (string value) #volume_driver=cinder.volume.drivers.lvm.LVMISCSIDriver # Timeout for creating the volume to migrate to when # performing volume migration (seconds) (integer value) #migration_create_volume_timeout_secs=300 # Offload pending volume delete during volume service startup # (boolean value) #volume_service_inithost_offload=false # FC Zoning mode configured (string value) #zoning_mode=none # User defined capabilities, a JSON formatted string # specifying key/value pairs. (string value) #extra_capabilities={} [BRCD_FABRIC_EXAMPLE] # # Options defined in cinder.zonemanager.drivers.brocade.brcd_fabric_opts # # Management IP of fabric (string value) #fc_fabric_address= # Fabric user ID (string value) #fc_fabric_user= # Password for user (string value) #fc_fabric_password= # Connecting port (integer value) #fc_fabric_port=22 # overridden zoning policy (string value) #zoning_policy=initiator-target # overridden zoning activation state (boolean value) #zone_activate=true # overridden zone name prefix (string value) #zone_name_prefix= # Principal switch WWN of the fabric (string value) #principal_switch_wwn= [CISCO_FABRIC_EXAMPLE] # # Options defined in cinder.zonemanager.drivers.cisco.cisco_fabric_opts # # Management IP of fabric (string value) #cisco_fc_fabric_address= # Fabric user ID (string value) #cisco_fc_fabric_user= # Password for user (string value) #cisco_fc_fabric_password= # Connecting port (integer value) #cisco_fc_fabric_port=22 # overridden zoning policy (string value) #cisco_zoning_policy=initiator-target # overridden zoning activation state (boolean value) #cisco_zone_activate=true # overridden zone name prefix (string value) #cisco_zone_name_prefix= # VSAN of the Fabric (string value) #cisco_zoning_vsan= [database] # # Options defined in oslo.db # # The file name to use with SQLite. (string value) #sqlite_db=oslo.sqlite # If True, SQLite uses synchronous mode. (boolean value) #sqlite_synchronous=true # The back end to use for the database. (string value) # Deprecated group/name - [DEFAULT]/db_backend #backend=sqlalchemy # The SQLAlchemy connection string to use to connect to the # database. (string value) # Deprecated group/name - [DEFAULT]/sql_connection # Deprecated group/name - [DATABASE]/sql_connection # Deprecated group/name - [sql]/connection #connection= # The SQLAlchemy connection string to use to connect to the # slave database. (string value) #slave_connection= # The SQL mode to be used for MySQL sessions. This option, # including the default, overrides any server-set SQL mode. To # use whatever SQL mode is set by the server configuration, # set this to no value. Example: mysql_sql_mode= (string # value) #mysql_sql_mode=TRADITIONAL # Timeout before idle SQL connections are reaped. (integer # value) # Deprecated group/name - [DEFAULT]/sql_idle_timeout # Deprecated group/name - [DATABASE]/sql_idle_timeout # Deprecated group/name - [sql]/idle_timeout #idle_timeout=3600 # Minimum number of SQL connections to keep open in a pool. # (integer value) # Deprecated group/name - [DEFAULT]/sql_min_pool_size # Deprecated group/name - [DATABASE]/sql_min_pool_size #min_pool_size=1 # Maximum number of SQL connections to keep open in a pool. # (integer value) # Deprecated group/name - [DEFAULT]/sql_max_pool_size # Deprecated group/name - [DATABASE]/sql_max_pool_size #max_pool_size= # Maximum db connection retries during startup. Set to -1 to # specify an infinite retry count. (integer value) # Deprecated group/name - [DEFAULT]/sql_max_retries # Deprecated group/name - [DATABASE]/sql_max_retries #max_retries=10 # Interval between retries of opening a SQL connection. # (integer value) # Deprecated group/name - [DEFAULT]/sql_retry_interval # Deprecated group/name - [DATABASE]/reconnect_interval #retry_interval=10 # If set, use this value for max_overflow with SQLAlchemy. # (integer value) # Deprecated group/name - [DEFAULT]/sql_max_overflow # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow #max_overflow= # Verbosity of SQL debugging information: 0=None, # 100=Everything. (integer value) # Deprecated group/name - [DEFAULT]/sql_connection_debug #connection_debug=0 # Add Python stack traces to SQL as comment strings. (boolean # value) # Deprecated group/name - [DEFAULT]/sql_connection_trace #connection_trace=false # If set, use this value for pool_timeout with SQLAlchemy. # (integer value) # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout #pool_timeout= # Enable the experimental use of database reconnect on # connection lost. (boolean value) #use_db_reconnect=false # Seconds between database connection retries. (integer value) #db_retry_interval=1 # If True, increases the interval between database connection # retries up to db_max_retry_interval. (boolean value) #db_inc_retry_interval=true # If db_inc_retry_interval is set, the maximum seconds between # database connection retries. (integer value) #db_max_retry_interval=10 # Maximum database connection retries before error is raised. # Set to -1 to specify an infinite retry count. (integer # value) #db_max_retries=20 # # Options defined in oslo.db.concurrency # # Enable the experimental use of thread pooling for all DB API # calls (boolean value) # Deprecated group/name - [DEFAULT]/dbapi_use_tpool #use_tpool=false [fc-zone-manager] # # Options defined in cinder.zonemanager.drivers.brocade.brcd_fc_zone_driver # # Southbound connector for zoning operation (string value) #brcd_sb_connector=cinder.zonemanager.drivers.brocade.brcd_fc_zone_client_cli.BrcdFCZoneClientCLI # # Options defined in cinder.zonemanager.drivers.cisco.cisco_fc_zone_driver # # Southbound connector for zoning operation (string value) #cisco_sb_connector=cinder.zonemanager.drivers.cisco.cisco_fc_zone_client_cli.CiscoFCZoneClientCLI # # Options defined in cinder.zonemanager.fc_zone_manager # # FC Zone Driver responsible for zone management (string # value) #zone_driver=cinder.zonemanager.drivers.brocade.brcd_fc_zone_driver.BrcdFCZoneDriver # Zoning policy configured by user (string value) #zoning_policy=initiator-target # Comma separated list of fibre channel fabric names. This # list of names is used to retrieve other SAN credentials for # connecting to each SAN fabric (string value) #fc_fabric_names= # FC San Lookup Service (string value) #fc_san_lookup_service=cinder.zonemanager.drivers.brocade.brcd_fc_san_lookup_service.BrcdFCSanLookupService [keymgr] # # Options defined in cinder.keymgr # # The full class name of the key manager API class (string # value) #api_class=cinder.keymgr.conf_key_mgr.ConfKeyManager # # Options defined in cinder.keymgr.conf_key_mgr # # Fixed key returned by key manager, specified in hex (string # value) #fixed_key= # # Options defined in cinder.keymgr.key_mgr # # Authentication url for encryption service. (string value) #encryption_auth_url=http://localhost:5000/v2.0 # Url for encryption service. (string value) #encryption_api_url=http://localhost:9311/v1 [keystone_authtoken] # # Options defined in keystonemiddleware.auth_token # # Prefix to prepend at the beginning of the path. Deprecated, # use identity_uri. (string value) #auth_admin_prefix= # Host providing the admin Identity API endpoint. Deprecated, # use identity_uri. (string value) #auth_host=127.0.0.1 # Port of the admin Identity API endpoint. Deprecated, use # identity_uri. (integer value) #auth_port=35357 # Protocol of the admin Identity API endpoint (http or https). # Deprecated, use identity_uri. (string value) #auth_protocol=https # Complete public Identity API endpoint (string value) #auth_uri= # Complete admin Identity API endpoint. This should specify # the unversioned root endpoint e.g. https://localhost:35357/ # (string value) #identity_uri= # API version of the admin Identity API endpoint (string # value) #auth_version= # Do not handle authorization requests within the middleware, # but delegate the authorization decision to downstream WSGI # components (boolean value) #delay_auth_decision=false # Request timeout value for communicating with Identity API # server. (boolean value) #http_connect_timeout= # How many times are we trying to reconnect when communicating # with Identity API Server. (integer value) #http_request_max_retries=3 # This option is deprecated and may be removed in a future # release. Single shared secret with the Keystone # configuration used for bootstrapping a Keystone # installation, or otherwise bypassing the normal # authentication process. This option should not be used, use # `admin_user` and `admin_password` instead. (string value) #admin_token= # Keystone account username (string value) #admin_user= # Keystone account password (string value) #admin_password= # Keystone service account tenant name to validate user tokens # (string value) #admin_tenant_name=admin # Env key for the swift cache (string value) #cache= # Required if Keystone server requires client certificate # (string value) #certfile= # Required if Keystone server requires client certificate # (string value) #keyfile= # A PEM encoded Certificate Authority to use when verifying # HTTPs connections. Defaults to system CAs. (string value) #cafile= # Verify HTTPS connections. (boolean value) #insecure=false # Directory used to cache files related to PKI tokens (string # value) #signing_dir= # Optionally specify a list of memcached server(s) to use for # caching. If left undefined, tokens will instead be cached # in-process. (list value) # Deprecated group/name - [DEFAULT]/memcache_servers #memcached_servers= # In order to prevent excessive effort spent validating # tokens, the middleware caches previously-seen tokens for a # configurable duration (in seconds). Set to -1 to disable # caching completely. (integer value) #token_cache_time=300 # Determines the frequency at which the list of revoked tokens # is retrieved from the Identity service (in seconds). A high # number of revocation events combined with a low cache # duration may significantly reduce performance. (integer # value) #revocation_cache_time=10 # (optional) if defined, indicate whether token data should be # authenticated or authenticated and encrypted. Acceptable # values are MAC or ENCRYPT. If MAC, token data is # authenticated (with HMAC) in the cache. If ENCRYPT, token # data is encrypted and authenticated in the cache. If the # value is not one of these options or empty, auth_token will # raise an exception on initialization. (string value) #memcache_security_strategy= # (optional, mandatory if memcache_security_strategy is # defined) this string is used for key derivation. (string # value) #memcache_secret_key= # (optional) number of seconds memcached server is considered # dead before it is tried again. (integer value) #memcache_pool_dead_retry=300 # (optional) max total number of open connections to every # memcached server. (integer value) #memcache_pool_maxsize=10 # (optional) socket timeout in seconds for communicating with # a memcache server. (integer value) #memcache_pool_socket_timeout=3 # (optional) number of seconds a connection to memcached is # held unused in the pool before it is closed. (integer value) #memcache_pool_unused_timeout=60 # (optional) number of seconds that an operation will wait to # get a memcache client connection from the pool. (integer # value) #memcache_pool_conn_get_timeout=10 # (optional) use the advanced (eventlet safe) memcache client # pool. The advanced pool will only work under python 2.x. # (boolean value) #memcache_use_advanced_pool=false # (optional) indicate whether to set the X-Service-Catalog # header. If False, middleware will not ask for service # catalog on token validation and will not set the X-Service- # Catalog header. (boolean value) #include_service_catalog=true # Used to control the use and type of token binding. Can be # set to: "disabled" to not check token binding. "permissive" # (default) to validate binding information if the bind type # is of a form known to the server and ignore it if not. # "strict" like "permissive" but if the bind type is unknown # the token will be rejected. "required" any form of token # binding is needed to be allowed. Finally the name of a # binding method that must be present in tokens. (string # value) #enforce_token_bind=permissive # If true, the revocation list will be checked for cached # tokens. This requires that PKI tokens are configured on the # Keystone server. (boolean value) #check_revocations_for_cached=false # Hash algorithms to use for hashing PKI tokens. This may be a # single algorithm or multiple. The algorithms are those # supported by Python standard hashlib.new(). The hashes will # be tried in the order given, so put the preferred one first # for performance. The result of the first hash will be stored # in the cache. This will typically be set to multiple values # only while migrating from a less secure algorithm to a more # secure one. Once all the old tokens are expired this option # should be set to a single value for better performance. # (list value) #hash_algorithms=md5 [matchmaker_redis] # # Options defined in oslo.messaging # # Host to locate redis. (string value) #host=127.0.0.1 # Use this port to connect to redis host. (integer value) #port=6379 # Password for Redis server (optional). (string value) #password= [matchmaker_ring] # # Options defined in oslo.messaging # # Matchmaker ring file (JSON). (string value) # Deprecated group/name - [DEFAULT]/matchmaker_ringfile #ringfile=/etc/oslo/matchmaker_ring.json [profiler] # # Options defined in cinder.service # # If False fully disable profiling feature. (boolean value) #profiler_enabled=false # If False doesn't trace SQL requests. (boolean value) #trace_sqlalchemy=false