openstack/deb-cinder
Code Issues Proposed changes
72a1c5dfa2
deb-cinder/cinder/volume/manager.py
Michał Dulko 7a2adc08c7 Add volume RPC API v3.0 
This patch creates volume RPC API version 3.0, while retaining
compatibility in rpcapi and manager for 2.x, allowing for continuous
deployment scenarios.

This should be merged just before the Newton release.

Change-Id: Ib927ccb3bb1f91e441f5b8540a3e39acefa4a6ab
2016-09-15 15:02:01 +02:00

4537 lines
198 KiB
Python
Raw Blame History

# Copyright 2010 United States Government as represented by the
# Administrator of the National Aeronautics and Space Administration.
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
"""
Volume manager manages creating, attaching, detaching, and persistent storage.
Persistent storage volumes keep their state independent of instances. You can
attach to an instance, terminate the instance, spawn a new instance (even
one from a different image) and re-attach the volume with the same data
intact.
**Related Flags**
:volume_manager: The module name of a class derived from
:class:`manager.Manager` (default:
:class:`cinder.volume.manager.Manager`).
:volume_driver: Used by :class:`Manager`. Defaults to
:class:`cinder.volume.drivers.lvm.LVMVolumeDriver`.
:volume_group: Name of the group that will contain exported volumes (default:
`cinder-volumes`)
:num_shell_tries: Number of times to attempt to run commands (default: 3)
"""
import requests
import time
from oslo_config import cfg
from oslo_log import log as logging
import oslo_messaging as messaging
from oslo_serialization import jsonutils
from oslo_service import periodic_task
from oslo_utils import excutils
from oslo_utils import importutils
from oslo_utils import timeutils
from oslo_utils import units
from oslo_utils import uuidutils
profiler = importutils.try_import('osprofiler.profiler')
import six
from taskflow import exceptions as tfe
from cinder.common import constants
from cinder import compute
from cinder import context
from cinder import coordination
from cinder import exception
from cinder import flow_utils
from cinder import keymgr as key_manager
from cinder.i18n import _, _LE, _LI, _LW
from cinder.image import cache as image_cache
from cinder.image import glance
from cinder import manager
from cinder.message import api as message_api
from cinder.message import defined_messages
from cinder.message import resource_types
from cinder import objects
from cinder.objects import fields
from cinder import quota
from cinder import utils
from cinder import volume as cinder_volume
from cinder.volume import configuration as config
from cinder.volume.flows.manager import create_volume
from cinder.volume.flows.manager import manage_existing
from cinder.volume.flows.manager import manage_existing_snapshot
from cinder.volume import rpcapi as volume_rpcapi
from cinder.volume import utils as vol_utils
from cinder.volume import volume_types
LOG = logging.getLogger(__name__)
QUOTAS = quota.QUOTAS
CGQUOTAS = quota.CGQUOTAS
GROUP_QUOTAS = quota.GROUP_QUOTAS
VALID_REMOVE_VOL_FROM_CG_STATUS = (
'available',
'in-use',
'error',
'error_deleting')
VALID_REMOVE_VOL_FROM_GROUP_STATUS = (
'available',
'in-use',
'error',
'error_deleting')
VALID_ADD_VOL_TO_CG_STATUS = (
'available',
'in-use')
VALID_ADD_VOL_TO_GROUP_STATUS = (
'available',
'in-use')
VALID_CREATE_CG_SRC_SNAP_STATUS = (fields.SnapshotStatus.AVAILABLE,)
VALID_CREATE_GROUP_SRC_SNAP_STATUS = (fields.SnapshotStatus.AVAILABLE,)
VALID_CREATE_CG_SRC_CG_STATUS = ('available',)
VALID_CREATE_GROUP_SRC_GROUP_STATUS = ('available',)
volume_manager_opts = [
cfg.StrOpt('volume_driver',
default='cinder.volume.drivers.lvm.LVMVolumeDriver',
help='Driver to use for volume creation'),
cfg.IntOpt('migration_create_volume_timeout_secs',
default=300,
help='Timeout for creating the volume to migrate to '
'when performing volume migration (seconds)'),
cfg.BoolOpt('volume_service_inithost_offload',
default=False,
help='Offload pending volume delete during '
'volume service startup'),
cfg.StrOpt('zoning_mode',
help='FC Zoning mode configured'),
cfg.StrOpt('extra_capabilities',
default='{}',
help='User defined capabilities, a JSON formatted string '
'specifying key/value pairs. The key/value pairs can '
'be used by the CapabilitiesFilter to select between '
'backends when requests specify volume types. For '
'example, specifying a service level or the geographical '
'location of a backend, then creating a volume type to '
'allow the user to select by these different '
'properties.'),
cfg.BoolOpt('suppress_requests_ssl_warnings',
default=False,
help='Suppress requests library SSL certificate warnings.'),
]
CONF = cfg.CONF
CONF.register_opts(volume_manager_opts)
MAPPING = {
'cinder.volume.drivers.huawei.huawei_18000.Huawei18000ISCSIDriver':
'cinder.volume.drivers.huawei.huawei_driver.HuaweiISCSIDriver',
'cinder.volume.drivers.huawei.huawei_driver.Huawei18000ISCSIDriver':
'cinder.volume.drivers.huawei.huawei_driver.HuaweiISCSIDriver',
'cinder.volume.drivers.huawei.huawei_18000.Huawei18000FCDriver':
'cinder.volume.drivers.huawei.huawei_driver.HuaweiFCDriver',
'cinder.volume.drivers.huawei.huawei_driver.Huawei18000FCDriver':
'cinder.volume.drivers.huawei.huawei_driver.HuaweiFCDriver',
'cinder.volume.drivers.hds.nfs.HDSNFSDriver':
'cinder.volume.drivers.hitachi.hnas_nfs.HNASNFSDriver',
'cinder.volume.drivers.hds.iscsi.HDSISCSIDriver':
'cinder.volume.drivers.hitachi.hnas_iscsi.HNASISCSIDriver',
'cinder.volume.drivers.hitachi.hnas_nfs.HDSNFSDriver':
'cinder.volume.drivers.hitachi.hnas_nfs.HNASNFSDriver',
'cinder.volume.drivers.hitachi.hnas_iscsi.HDSISCSIDriver':
'cinder.volume.drivers.hitachi.hnas_iscsi.HNASISCSIDriver',
'cinder.volume.drivers.san.hp.hp_3par_fc.HP3PARFCDriver':
'cinder.volume.drivers.hpe.hpe_3par_fc.HPE3PARFCDriver',
'cinder.volume.drivers.san.hp.hp_3par_iscsi.HP3PARISCSIDriver':
'cinder.volume.drivers.hpe.hpe_3par_iscsi.HPE3PARISCSIDriver',
'cinder.volume.drivers.san.hp.hp_lefthand_iscsi.HPLeftHandISCSIDriver':
'cinder.volume.drivers.hpe.hpe_lefthand_iscsi.HPELeftHandISCSIDriver',
'cinder.volume.drivers.san.hp.hp_xp_fc.HPXPFCDriver':
'cinder.volume.drivers.hpe.hpe_xp_fc.HPEXPFCDriver',
'cinder.volume.drivers.ibm.xiv_ds8k':
'cinder.volume.drivers.ibm.ibm_storage',
}
class VolumeManager(manager.SchedulerDependentManager):
"""Manages attachable block storage devices."""
RPC_API_VERSION = volume_rpcapi.VolumeAPI.RPC_API_VERSION
target = messaging.Target(version='2.6')
# On cloning a volume, we shouldn't copy volume_type, consistencygroup
# and volume_attachment, because the db sets that according to [field]_id,
# which we do copy. We also skip some other values that are set during
# creation of Volume object.
_VOLUME_CLONE_SKIP_PROPERTIES = {
'id', '_name_id', 'name_id', 'name', 'status',
'attach_status', 'migration_status', 'volume_type',
'consistencygroup', 'volume_attachment', 'group'}
def __init__(self, volume_driver=None, service_name=None,
*args, **kwargs):
"""Load the driver from the one specified in args, or from flags."""
# update_service_capabilities needs service_name to be volume
super(VolumeManager, self).__init__(service_name='volume',
*args, **kwargs)
self.additional_endpoints.append(_VolumeV3Proxy(self))
self.configuration = config.Configuration(volume_manager_opts,
config_group=service_name)
self.stats = {}
if not volume_driver:
# Get from configuration, which will get the default
# if its not using the multi backend
volume_driver = self.configuration.volume_driver
if volume_driver in MAPPING:
LOG.warning(_LW("Driver path %s is deprecated, update your "
"configuration to the new path."), volume_driver)
volume_driver = MAPPING[volume_driver]
vol_db_empty = self._set_voldb_empty_at_startup_indicator(
context.get_admin_context())
LOG.debug("Cinder Volume DB check: vol_db_empty=%s", vol_db_empty)
# We pass the current setting for service.active_backend_id to
# the driver on init, incase there was a restart or something
curr_active_backend_id = None
svc_host = vol_utils.extract_host(self.host, 'backend')
try:
service = objects.Service.get_by_args(
context.get_admin_context(),
svc_host,
constants.VOLUME_BINARY)
except exception.ServiceNotFound:
# NOTE(jdg): This is to solve problems with unit tests
LOG.info(_LI("Service not found for updating "
"active_backend_id, assuming default "
"for driver init."))
else:
curr_active_backend_id = service.active_backend_id
if self.configuration.suppress_requests_ssl_warnings:
LOG.warning(_LW("Suppressing requests library SSL Warnings"))
requests.packages.urllib3.disable_warnings(
requests.packages.urllib3.exceptions.InsecureRequestWarning)
requests.packages.urllib3.disable_warnings(
requests.packages.urllib3.exceptions.InsecurePlatformWarning)
self.key_manager = key_manager.API(CONF)
self.driver = importutils.import_object(
volume_driver,
configuration=self.configuration,
db=self.db,
host=self.host,
is_vol_db_empty=vol_db_empty,
active_backend_id=curr_active_backend_id)
self.message_api = message_api.API()
if CONF.profiler.enabled and profiler is not None:
self.driver = profiler.trace_cls("driver")(self.driver)
try:
self.extra_capabilities = jsonutils.loads(
self.driver.configuration.extra_capabilities)
except AttributeError:
self.extra_capabilities = {}
except Exception:
with excutils.save_and_reraise_exception():
LOG.error(_LE("Invalid JSON: %s"),
self.driver.configuration.extra_capabilities)
if self.driver.configuration.safe_get(
'image_volume_cache_enabled'):
max_cache_size = self.driver.configuration.safe_get(
'image_volume_cache_max_size_gb')
max_cache_entries = self.driver.configuration.safe_get(
'image_volume_cache_max_count')
self.image_volume_cache = image_cache.ImageVolumeCache(
self.db,
cinder_volume.API(),
max_cache_size,
max_cache_entries
)
LOG.info(_LI('Image-volume cache enabled for host %(host)s.'),
{'host': self.host})
else:
LOG.info(_LI('Image-volume cache disabled for host %(host)s.'),
{'host': self.host})
self.image_volume_cache = None
def _count_allocated_capacity(self, ctxt, volume):
pool = vol_utils.extract_host(volume['host'], 'pool')
if pool is None:
# No pool name encoded in host, so this is a legacy
# volume created before pool is introduced, ask
# driver to provide pool info if it has such
# knowledge and update the DB.
try:
pool = self.driver.get_pool(volume)
except Exception:
LOG.exception(_LE('Fetch volume pool name failed.'),
resource=volume)
return
if pool:
new_host = vol_utils.append_host(volume['host'],
pool)
self.db.volume_update(ctxt, volume['id'],
{'host': new_host})
else:
# Otherwise, put them into a special fixed pool with
# volume_backend_name being the pool name, if
# volume_backend_name is None, use default pool name.
# This is only for counting purpose, doesn't update DB.
pool = (self.driver.configuration.safe_get(
'volume_backend_name') or vol_utils.extract_host(
volume['host'], 'pool', True))
try:
pool_stat = self.stats['pools'][pool]
except KeyError:
# First volume in the pool
self.stats['pools'][pool] = dict(
allocated_capacity_gb=0)
pool_stat = self.stats['pools'][pool]
pool_sum = pool_stat['allocated_capacity_gb']
pool_sum += volume['size']
self.stats['pools'][pool]['allocated_capacity_gb'] = pool_sum
self.stats['allocated_capacity_gb'] += volume['size']
def _set_voldb_empty_at_startup_indicator(self, ctxt):
"""Determine if the Cinder volume DB is empty.
A check of the volume DB is done to determine whether it is empty or
not at this point.
:param ctxt: our working context
"""
vol_entries = self.db.volume_get_all(ctxt, None, 1, filters=None)
if len(vol_entries) == 0:
LOG.info(_LI("Determined volume DB was empty at startup."))
return True
else:
LOG.info(_LI("Determined volume DB was not empty at startup."))
return False
def _sync_provider_info(self, ctxt, volumes, snapshots):
# NOTE(jdg): For now this just updates provider_id, we can add more
# add more items to the update if theyr'e releveant but we need
# to be safe in what we allow and add a list of allowed keys
# things that make sense are provider_*, replication_status etc
updates, snapshot_updates = self.driver.update_provider_info(
volumes, snapshots)
if updates:
for volume in volumes:
# NOTE(JDG): Make sure returned item is in this hosts volumes
update = (
[updt for updt in updates if updt['id'] ==
volume['id']][0])
if update:
self.db.volume_update(
ctxt,
update['id'],
{'provider_id': update['provider_id']})
# NOTE(jdg): snapshots are slighty harder, because
# we do not have a host column and of course no get
# all by host, so we use a get_all and bounce our
# response off of it
if snapshot_updates:
cinder_snaps = self.db.snapshot_get_all(ctxt)
for snap in cinder_snaps:
# NOTE(jdg): For now we only update those that have no entry
if not snap.get('provider_id', None):
update = (
[updt for updt in snapshot_updates if updt['id'] ==
snap['id']][0])
if update:
self.db.snapshot_update(
ctxt,
update['id'],
{'provider_id': update['provider_id']})
def _include_resources_in_cluster(self, ctxt):
LOG.info(_LI('Including all resources from host %(host)s in cluster '
'%(cluster)s.'),
{'host': self.host, 'cluster': self.cluster})
num_vols = objects.VolumeList.include_in_cluster(
ctxt, self.cluster, host=self.host)
num_cgs = objects.ConsistencyGroupList.include_in_cluster(
ctxt, self.cluster, host=self.host)
LOG.info(_LI('%(num_vols)s volumes and %(num_cgs)s consistency groups '
'from host %(host)s have been included in cluster '
'%(cluster)s.'),
{'num_vols': num_vols, 'num_cgs': num_cgs,
'host': self.host, 'cluster': self.cluster})
def init_host(self, added_to_cluster=None):
"""Perform any required initialization."""
ctxt = context.get_admin_context()
if not self.driver.supported:
utils.log_unsupported_driver_warning(self.driver)
if not self.configuration.enable_unsupported_driver:
LOG.error(_LE("Unsupported drivers are disabled."
" You can re-enable by adding "
"enable_unsupported_driver=True to the "
"driver section in cinder.conf"),
resource={'type': 'driver',
'id': self.__class__.__name__})
return
# If we have just added this host to a cluster we have to include all
# our resources in that cluster.
if added_to_cluster:
self._include_resources_in_cluster(ctxt)
LOG.info(_LI("Starting volume driver %(driver_name)s (%(version)s)"),
{'driver_name': self.driver.__class__.__name__,
'version': self.driver.get_version()})
try:
self.driver.do_setup(ctxt)
self.driver.check_for_setup_error()
except Exception:
LOG.exception(_LE("Failed to initialize driver."),
resource={'type': 'driver',
'id': self.__class__.__name__})
# we don't want to continue since we failed
# to initialize the driver correctly.
return
# Initialize backend capabilities list
self.driver.init_capabilities()
volumes = objects.VolumeList.get_all_by_host(ctxt, self.host)
snapshots = self.db.snapshot_get_by_host(ctxt, self.host)
self._sync_provider_info(ctxt, volumes, snapshots)
# FIXME volume count for exporting is wrong
try:
self.stats['pools'] = {}
self.stats.update({'allocated_capacity_gb': 0})
for volume in volumes:
# available volume should also be counted into allocated
if volume['status'] in ['in-use', 'available']:
# calculate allocated capacity for driver
self._count_allocated_capacity(ctxt, volume)
try:
if volume['status'] in ['in-use']:
self.driver.ensure_export(ctxt, volume)
except Exception:
LOG.exception(_LE("Failed to re-export volume, "
"setting to ERROR."),
resource=volume)
volume.status = 'error'
volume.save()
elif volume['status'] in ('downloading', 'creating'):
LOG.warning(_LW("Detected volume stuck "
"in %(curr_status)s "
"status, setting to ERROR."),
{'curr_status': volume['status']},
resource=volume)
if volume['status'] == 'downloading':
self.driver.clear_download(ctxt, volume)
volume.status = 'error'
volume.save()
elif volume.status == 'uploading':
# Set volume status to available or in-use.
self.db.volume_update_status_based_on_attachment(
ctxt, volume.id)
else:
pass
snapshots = objects.SnapshotList.get_by_host(
ctxt, self.host, {'status': fields.SnapshotStatus.CREATING})
for snapshot in snapshots:
LOG.warning(_LW("Detected snapshot stuck in creating "
"status, setting to ERROR."), resource=snapshot)
snapshot.status = fields.SnapshotStatus.ERROR
snapshot.save()
except Exception:
LOG.exception(_LE("Error during re-export on driver init."),
resource=volume)
return
self.driver.set_throttle()
# at this point the driver is considered initialized.
# NOTE(jdg): Careful though because that doesn't mean
# that an entry exists in the service table
self.driver.set_initialized()
for volume in volumes:
if volume['status'] == 'deleting':
if CONF.volume_service_inithost_offload:
# Offload all the pending volume delete operations to the
# threadpool to prevent the main volume service thread
# from being blocked.
self._add_to_threadpool(self.delete_volume, ctxt,
volume['id'], volume=volume,
cascade=True)
else:
# By default, delete volumes sequentially
self.delete_volume(ctxt, volume['id'], volume=volume,
cascade=True)
LOG.info(_LI("Resume volume delete completed successfully."),
resource=volume)
# collect and publish service capabilities
self.publish_service_capabilities(ctxt)
LOG.info(_LI("Driver initialization completed successfully."),
resource={'type': 'driver',
'id': self.driver.__class__.__name__})
def init_host_with_rpc(self):
LOG.info(_LI("Initializing RPC dependent components of volume "
"driver %(driver_name)s (%(version)s)"),
{'driver_name': self.driver.__class__.__name__,
'version': self.driver.get_version()})
try:
# Make sure the driver is initialized first
utils.log_unsupported_driver_warning(self.driver)
utils.require_driver_initialized(self.driver)
except exception.DriverNotInitialized:
LOG.error(_LE("Cannot complete RPC initialization because "
"driver isn't initialized properly."),
resource={'type': 'driver',
'id': self.driver.__class__.__name__})
return
stats = self.driver.get_volume_stats(refresh=True)
svc_host = vol_utils.extract_host(self.host, 'backend')
try:
service = objects.Service.get_by_args(
context.get_admin_context(),
svc_host,
constants.VOLUME_BINARY)
except exception.ServiceNotFound:
with excutils.save_and_reraise_exception():
LOG.error(_LE("Service not found for updating "
"replication_status."))
if service.replication_status != (
fields.ReplicationStatus.FAILED_OVER):
if stats and stats.get('replication_enabled', False):
service.replication_status = fields.ReplicationStatus.ENABLED
else:
service.replication_status = fields.ReplicationStatus.DISABLED
service.save()
LOG.info(_LI("Driver post RPC initialization completed successfully."),
resource={'type': 'driver',
'id': self.driver.__class__.__name__})
def is_working(self):
"""Return if Manager is ready to accept requests.
This is to inform Service class that in case of volume driver
initialization failure the manager is actually down and not ready to
accept any requests.
"""
return self.driver.initialized
def create_volume(self, context, volume_id, request_spec=None,
filter_properties=None, allow_reschedule=True,
volume=None):
"""Creates the volume."""
# Log about unsupported drivers
utils.log_unsupported_driver_warning(self.driver)
# FIXME(dulek): Remove this in v3.0 of RPC API.
if volume is None:
# For older clients, mimic the old behavior and look up the volume
# by its volume_id.
volume = objects.Volume.get_by_id(context, volume_id)
# FIXME(dulek): Remove this in v3.0 of RPC API.
if isinstance(request_spec, dict):
# We may receive request_spec as dict from older clients.
request_spec = objects.RequestSpec.from_primitives(request_spec)
context_elevated = context.elevated()
if filter_properties is None:
filter_properties = {}
if request_spec is None:
request_spec = objects.RequestSpec()
try:
# NOTE(flaper87): Driver initialization is
# verified by the task itself.
flow_engine = create_volume.get_flow(
context_elevated,
self,
self.db,
self.driver,
self.scheduler_rpcapi,
self.host,
volume,
allow_reschedule,
context,
request_spec,
filter_properties,
image_volume_cache=self.image_volume_cache,
)
except Exception:
msg = _("Create manager volume flow failed.")
LOG.exception(msg, resource={'type': 'volume', 'id': volume.id})
raise exception.CinderException(msg)
snapshot_id = request_spec.get('snapshot_id')
source_volid = request_spec.get('source_volid')
source_replicaid = request_spec.get('source_replicaid')
if snapshot_id is not None:
# Make sure the snapshot is not deleted until we are done with it.
locked_action = "%s-%s" % (snapshot_id, 'delete_snapshot')
elif source_volid is not None:
# Make sure the volume is not deleted until we are done with it.
locked_action = "%s-%s" % (source_volid, 'delete_volume')
elif source_replicaid is not None:
# Make sure the volume is not deleted until we are done with it.
locked_action = "%s-%s" % (source_replicaid, 'delete_volume')
else:
locked_action = None
def _run_flow():
# This code executes create volume flow. If something goes wrong,
# flow reverts all job that was done and reraises an exception.
# Otherwise, all data that was generated by flow becomes available
# in flow engine's storage.
with flow_utils.DynamicLogListener(flow_engine, logger=LOG):
flow_engine.run()
# NOTE(dulek): Flag to indicate if volume was rescheduled. Used to
# decide if allocated_capacity should be incremented.
rescheduled = False
try:
if locked_action is None:
_run_flow()
else:
with coordination.Lock(locked_action):
_run_flow()
finally:
try:
flow_engine.storage.fetch('refreshed')
except tfe.NotFound:
# If there's no vol_ref, then flow is reverted. Lets check out
# if rescheduling occurred.
try:
rescheduled = flow_engine.storage.get_revert_result(
create_volume.OnFailureRescheduleTask.make_name(
[create_volume.ACTION]))
except tfe.NotFound:
pass
if not rescheduled:
# NOTE(dulek): Volume wasn't rescheduled so we need to update
# volume stats as these are decremented on delete.
self._update_allocated_capacity(volume)
LOG.info(_LI("Created volume successfully."), resource=volume)
return volume.id
# FIXME(bluex): replace volume_id with volume.id when volume_id is removed
@coordination.synchronized('{volume_id}-{f_name}')
def delete_volume(self, context, volume_id,
unmanage_only=False,
volume=None,
cascade=False):
"""Deletes and unexports volume.
1. Delete a volume(normal case)
Delete a volume and update quotas.
2. Delete a migration volume
If deleting the volume in a migration, we want to skip
quotas but we need database updates for the volume.
"""
context = context.elevated()
try:
# FIXME(dulek): Remove this in v3.0 of RPC API.
if volume is None:
volume = objects.Volume.get_by_id(context, volume_id)
else:
volume.refresh()
except exception.VolumeNotFound:
# NOTE(thingee): It could be possible for a volume to
# be deleted when resuming deletes from init_host().
LOG.debug("Attempted delete of non-existent volume: %s", volume_id)
return
if context.project_id != volume.project_id:
project_id = volume.project_id
else:
project_id = context.project_id
if volume['attach_status'] == "attached":
# Volume is still attached, need to detach first
raise exception.VolumeAttached(volume_id=volume_id)
if vol_utils.extract_host(volume.host) != self.host:
raise exception.InvalidVolume(
reason=_("volume is not local to this node"))
if unmanage_only and cascade:
# This could be done, but is ruled out for now just
# for simplicity.
raise exception.Invalid(
reason=_("Unmanage and cascade delete options "
"are mutually exclusive."))
# The status 'deleting' is not included, because it only applies to
# the source volume to be deleted after a migration. No quota
# needs to be handled for it.
is_migrating = volume.migration_status not in (None, 'error',
'success')
is_migrating_dest = (is_migrating and
volume.migration_status.startswith(
'target:'))
self._notify_about_volume_usage(context, volume, "delete.start")
try:
# NOTE(flaper87): Verify the driver is enabled
# before going forward. The exception will be caught
# and the volume status updated.
utils.require_driver_initialized(self.driver)
self.driver.remove_export(context, volume)
if unmanage_only:
self.driver.unmanage(volume)
elif cascade:
LOG.debug('Performing cascade delete.')
snapshots = objects.SnapshotList.get_all_for_volume(context,
volume.id)
for s in snapshots:
if s.status != 'deleting':
self._clear_db(context, is_migrating_dest, volume,
'error_deleting')
msg = (_("Snapshot %(id)s was found in state "
"%(state)s rather than 'deleting' during "
"cascade delete.") % {'id': s.id,
'state': s.status})
raise exception.InvalidSnapshot(reason=msg)
self.delete_snapshot(context, s)
LOG.debug('Snapshots deleted, issuing volume delete')
self.driver.delete_volume(volume)
else:
self.driver.delete_volume(volume)
except exception.VolumeIsBusy:
LOG.error(_LE("Unable to delete busy volume."),
resource=volume)
# If this is a destination volume, we have to clear the database
# record to avoid user confusion.
self._clear_db(context, is_migrating_dest, volume,
'available')
return
except Exception:
with excutils.save_and_reraise_exception():
# If this is a destination volume, we have to clear the
# database record to avoid user confusion.
self._clear_db(context, is_migrating_dest, volume,
'error_deleting')
# If deleting source/destination volume in a migration, we should
# skip quotas.
if not is_migrating:
# Get reservations
try:
reserve_opts = {'volumes': -1,
'gigabytes': -volume.size}
QUOTAS.add_volume_type_opts(context,
reserve_opts,
volume.volume_type_id)
reservations = QUOTAS.reserve(context,
project_id=project_id,
**reserve_opts)
except Exception:
reservations = None
LOG.exception(_LE("Failed to update usages deleting volume."),
resource=volume)
# Delete glance metadata if it exists
self.db.volume_glance_metadata_delete_by_volume(context, volume_id)
volume.destroy()
# If deleting source/destination volume in a migration, we should
# skip quotas.
if not is_migrating:
self._notify_about_volume_usage(context, volume, "delete.end")
# Commit the reservations
if reservations:
QUOTAS.commit(context, reservations, project_id=project_id)
pool = vol_utils.extract_host(volume.host, 'pool')
if pool is None:
# Legacy volume, put them into default pool
pool = self.driver.configuration.safe_get(
'volume_backend_name') or vol_utils.extract_host(
volume.host, 'pool', True)
size = volume.size
try:
self.stats['pools'][pool]['allocated_capacity_gb'] -= size
except KeyError:
self.stats['pools'][pool] = dict(
allocated_capacity_gb=-size)
self.publish_service_capabilities(context)
LOG.info(_LI("Deleted volume successfully."), resource=volume)
def _clear_db(self, context, is_migrating_dest, volume_ref, status):
# This method is called when driver.unmanage() or
# driver.delete_volume() fails in delete_volume(), so it is already
# in the exception handling part.
if is_migrating_dest:
volume_ref.destroy()
LOG.error(_LE("Unable to delete the destination volume "
"during volume migration, (NOTE: database "
"record needs to be deleted)."), resource=volume_ref)
else:
volume_ref.status = status
volume_ref.save()
def create_snapshot(self, context, volume_id, snapshot):
"""Creates and exports the snapshot."""
context = context.elevated()
self._notify_about_snapshot_usage(
context, snapshot, "create.start")
try:
# NOTE(flaper87): Verify the driver is enabled
# before going forward. The exception will be caught
# and the snapshot status updated.
utils.require_driver_initialized(self.driver)
# Pass context so that drivers that want to use it, can,
# but it is not a requirement for all drivers.
snapshot.context = context
model_update = self.driver.create_snapshot(snapshot)
if model_update:
snapshot.update(model_update)
snapshot.save()
except Exception:
with excutils.save_and_reraise_exception():
snapshot.status = fields.SnapshotStatus.ERROR
snapshot.save()
vol_ref = self.db.volume_get(context, snapshot.volume_id)
if vol_ref.bootable:
try:
self.db.volume_glance_metadata_copy_to_snapshot(
context, snapshot.id, snapshot.volume_id)
except exception.GlanceMetadataNotFound:
# If volume is not created from image, No glance metadata
# would be available for that volume in
# volume glance metadata table
pass
except exception.CinderException as ex:
LOG.exception(_LE("Failed updating snapshot"
" metadata using the provided volumes"
" %(volume_id)s metadata"),
{'volume_id': snapshot.volume_id},
resource=snapshot)
snapshot.status = fields.SnapshotStatus.ERROR
snapshot.save()
raise exception.MetadataCopyFailure(reason=six.text_type(ex))
snapshot.status = fields.SnapshotStatus.AVAILABLE
snapshot.progress = '100%'
snapshot.save()
self._notify_about_snapshot_usage(context, snapshot, "create.end")
LOG.info(_LI("Create snapshot completed successfully"),
resource=snapshot)
return snapshot.id
@coordination.synchronized('{snapshot.id}-{f_name}')
def delete_snapshot(self, context, snapshot, unmanage_only=False):
"""Deletes and unexports snapshot."""
context = context.elevated()
snapshot._context = context
project_id = snapshot.project_id
self._notify_about_snapshot_usage(
context, snapshot, "delete.start")
try:
# NOTE(flaper87): Verify the driver is enabled
# before going forward. The exception will be caught
# and the snapshot status updated.
utils.require_driver_initialized(self.driver)
# Pass context so that drivers that want to use it, can,
# but it is not a requirement for all drivers.
snapshot.context = context
snapshot.save()
if unmanage_only:
self.driver.unmanage_snapshot(snapshot)
else:
self.driver.delete_snapshot(snapshot)
except exception.SnapshotIsBusy:
LOG.error(_LE("Delete snapshot failed, due to snapshot busy."),
resource=snapshot)
snapshot.status = fields.SnapshotStatus.AVAILABLE
snapshot.save()
return
except Exception:
with excutils.save_and_reraise_exception():
snapshot.status = fields.SnapshotStatus.ERROR_DELETING
snapshot.save()
# Get reservations
try:
if CONF.no_snapshot_gb_quota:
reserve_opts = {'snapshots': -1}
else:
reserve_opts = {
'snapshots': -1,
'gigabytes': -snapshot.volume_size,
}
volume_ref = self.db.volume_get(context, snapshot.volume_id)
QUOTAS.add_volume_type_opts(context,
reserve_opts,
volume_ref.get('volume_type_id'))
reservations = QUOTAS.reserve(context,
project_id=project_id,
**reserve_opts)
except Exception:
reservations = None
LOG.exception(_LE("Update snapshot usages failed."),
resource=snapshot)
self.db.volume_glance_metadata_delete_by_snapshot(context, snapshot.id)
snapshot.destroy()
self._notify_about_snapshot_usage(context, snapshot, "delete.end")
# Commit the reservations
if reservations:
QUOTAS.commit(context, reservations, project_id=project_id)
LOG.info(_LI("Delete snapshot completed successfully"),
resource=snapshot)
@coordination.synchronized('{volume_id}')
def attach_volume(self, context, volume_id, instance_uuid, host_name,
mountpoint, mode):
"""Updates db to show volume is attached."""
# check the volume status before attaching
volume = self.db.volume_get(context, volume_id)
volume_metadata = self.db.volume_admin_metadata_get(
context.elevated(), volume_id)
if volume['status'] == 'attaching':
if (volume_metadata.get('attached_mode') and
volume_metadata.get('attached_mode') != mode):
raise exception.InvalidVolume(
reason=_("being attached by different mode"))
if (volume['status'] == 'in-use' and not volume['multiattach']
and not volume['migration_status']):
raise exception.InvalidVolume(
reason=_("volume is already attached"))
host_name_sanitized = utils.sanitize_hostname(
host_name) if host_name else None
if instance_uuid:
attachments = \
self.db.volume_attachment_get_all_by_instance_uuid(
context, volume_id, instance_uuid)
else:
attachments = (
self.db.volume_attachment_get_all_by_host(
context,
volume_id,
host_name_sanitized))
if attachments:
self.db.volume_update(context, volume_id,
{'status': 'in-use'})
return
self._notify_about_volume_usage(context, volume,
"attach.start")
values = {'volume_id': volume_id,
'attach_status': 'attaching', }
attachment = self.db.volume_attach(context.elevated(), values)
volume_metadata = self.db.volume_admin_metadata_update(
context.elevated(), volume_id,
{"attached_mode": mode}, False)
attachment_id = attachment['id']
if instance_uuid and not uuidutils.is_uuid_like(instance_uuid):
self.db.volume_attachment_update(context, attachment_id,
{'attach_status':
'error_attaching'})
raise exception.InvalidUUID(uuid=instance_uuid)
volume = self.db.volume_get(context, volume_id)
if volume_metadata.get('readonly') == 'True' and mode != 'ro':
self.db.volume_update(context, volume_id,
{'status': 'error_attaching'})
self.message_api.create(
context, defined_messages.ATTACH_READONLY_VOLUME,
context.project_id, resource_type=resource_types.VOLUME,
resource_uuid=volume_id)
raise exception.InvalidVolumeAttachMode(mode=mode,
volume_id=volume_id)
try:
# NOTE(flaper87): Verify the driver is enabled
# before going forward. The exception will be caught
# and the volume status updated.
utils.require_driver_initialized(self.driver)
LOG.debug('Attaching volume %(volume_id)s to instance '
'%(instance)s at mountpoint %(mount)s on host '
'%(host)s.',
{'volume_id': volume_id, 'instance': instance_uuid,
'mount': mountpoint, 'host': host_name_sanitized},
resource=volume)
self.driver.attach_volume(context,
volume,
instance_uuid,
host_name_sanitized,
mountpoint)
except Exception:
with excutils.save_and_reraise_exception():
self.db.volume_attachment_update(
context, attachment_id,
{'attach_status': 'error_attaching'})
volume = self.db.volume_attached(context.elevated(),
attachment_id,
instance_uuid,
host_name_sanitized,
mountpoint,
mode)
self._notify_about_volume_usage(context, volume, "attach.end")
LOG.info(_LI("Attach volume completed successfully."),
resource=volume)
return self.db.volume_attachment_get(context, attachment_id)
@coordination.synchronized('{volume_id}-{f_name}')
def detach_volume(self, context, volume_id, attachment_id=None):
"""Updates db to show volume is detached."""
# TODO(vish): refactor this into a more general "unreserve"
volume = self.db.volume_get(context, volume_id)
attachment = None
if attachment_id:
try:
attachment = self.db.volume_attachment_get(context,
attachment_id)
except exception.VolumeAttachmentNotFound:
LOG.info(_LI("Volume detach called, but volume not attached."),
resource=volume)
# We need to make sure the volume status is set to the correct
# status. It could be in detaching status now, and we don't
# want to leave it there.
self.db.volume_detached(context, volume_id, attachment_id)
return
else:
# We can try and degrade gracefully here by trying to detach
# a volume without the attachment_id here if the volume only has
# one attachment. This is for backwards compatibility.
attachments = self.db.volume_attachment_get_all_by_volume_id(
context, volume_id)
if len(attachments) > 1:
# There are more than 1 attachments for this volume
# we have to have an attachment id.
msg = _("Detach volume failed: More than one attachment, "
"but no attachment_id provided.")
LOG.error(msg, resource=volume)
raise exception.InvalidVolume(reason=msg)
elif len(attachments) == 1:
attachment = attachments[0]
else:
# there aren't any attachments for this volume.
# so set the status to available and move on.
LOG.info(_LI("Volume detach called, but volume not attached."),
resource=volume)
self.db.volume_update(context, volume_id,
{'status': 'available',
'attach_status': 'detached'})
return
self._notify_about_volume_usage(context, volume, "detach.start")
try:
# NOTE(flaper87): Verify the driver is enabled
# before going forward. The exception will be caught
# and the volume status updated.
utils.require_driver_initialized(self.driver)
LOG.debug('Detaching volume %(volume_id)s from instance '
'%(instance)s.',
{'volume_id': volume_id,
'instance': attachment.get('instance_uuid')},
resource=volume)
self.driver.detach_volume(context, volume, attachment)
except Exception:
with excutils.save_and_reraise_exception():
self.db.volume_attachment_update(
context, attachment.get('id'),
{'attach_status': 'error_detaching'})
# NOTE(jdg): We used to do an ensure export here to
# catch upgrades while volumes were attached (E->F)
# this was necessary to convert in-use volumes from
# int ID's to UUID's. Don't need this any longer
# We're going to remove the export here
# (delete the iscsi target)
volume = self.db.volume_get(context, volume_id)
try:
utils.require_driver_initialized(self.driver)
self.driver.remove_export(context.elevated(), volume)
except exception.DriverNotInitialized:
with excutils.save_and_reraise_exception():
LOG.exception(_LE("Detach volume failed, due to "
"uninitialized driver."),
resource=volume)
except Exception as ex:
LOG.exception(_LE("Detach volume failed, due to "
"remove-export failure."),
resource=volume)
raise exception.RemoveExportException(volume=volume_id,
reason=six.text_type(ex))
self.db.volume_detached(context.elevated(), volume_id,
attachment.get('id'))
self.db.volume_admin_metadata_delete(context.elevated(), volume_id,
'attached_mode')
self._notify_about_volume_usage(context, volume, "detach.end")
LOG.info(_LI("Detach volume completed successfully."), resource=volume)
def _create_image_cache_volume_entry(self, ctx, volume_ref,
image_id, image_meta):
"""Create a new image-volume and cache entry for it.
This assumes that the image has already been downloaded and stored
in the volume described by the volume_ref.
"""
image_volume = None
try:
if not self.image_volume_cache.ensure_space(
ctx,
volume_ref['size'],
volume_ref['host']):
LOG.warning(_LW('Unable to ensure space for image-volume in'
' cache. Will skip creating entry for image'
' %(image)s on host %(host)s.'),
{'image': image_id, 'host': volume_ref['host']})
return
image_volume = self._clone_image_volume(ctx,
volume_ref,
image_meta)
if not image_volume:
LOG.warning(_LW('Unable to clone image_volume for image '
'%(image_id)s will not create cache entry.'),
{'image_id': image_id})
return
self.image_volume_cache.create_cache_entry(
ctx,
image_volume,
image_id,
image_meta
)
except exception.CinderException as e:
LOG.warning(_LW('Failed to create new image-volume cache entry.'
' Error: %(exception)s'), {'exception': e})
if image_volume:
self.delete_volume(ctx, image_volume.id)
def _clone_image_volume(self, ctx, volume, image_meta):
volume_type_id = volume.get('volume_type_id')
reserve_opts = {'volumes': 1, 'gigabytes': volume.size}
QUOTAS.add_volume_type_opts(ctx, reserve_opts, volume_type_id)
reservations = QUOTAS.reserve(ctx, **reserve_opts)
try:
new_vol_values = {k: volume[k] for k in set(volume.keys()) -
self._VOLUME_CLONE_SKIP_PROPERTIES}
new_vol_values['volume_type_id'] = volume_type_id
new_vol_values['attach_status'] = 'detached'
new_vol_values['status'] = 'creating'
new_vol_values['project_id'] = ctx.project_id
new_vol_values['display_name'] = 'image-%s' % image_meta['id']
new_vol_values['source_volid'] = volume.id
LOG.debug('Creating image volume entry: %s.', new_vol_values)
image_volume = objects.Volume(context=ctx, **new_vol_values)
image_volume.create()
except Exception as ex:
LOG.exception(_LE('Create clone_image_volume: %(volume_id)s'
'for image %(image_id)s, '
'failed (Exception: %(except)s)'),
{'volume_id': volume.id,
'image_id': image_meta['id'],
'except': ex})
QUOTAS.rollback(ctx, reservations)
return
QUOTAS.commit(ctx, reservations,
project_id=new_vol_values['project_id'])
try:
self.create_volume(ctx, image_volume.id,
allow_reschedule=False, volume=image_volume)
image_volume = self.db.volume_get(ctx, image_volume.id)
if image_volume.status != 'available':
raise exception.InvalidVolume(_('Volume is not available.'))
self.db.volume_admin_metadata_update(ctx.elevated(),
image_volume.id,
{'readonly': 'True'},
False)
return image_volume
except exception.CinderException:
LOG.exception(_LE('Failed to clone volume %(volume_id)s for '
'image %(image_id)s.'),
{'volume_id': volume.id,
'image_id': image_meta['id']})
try:
self.delete_volume(ctx, image_volume.id)
except exception.CinderException:
LOG.exception(_LE('Could not delete the image volume %(id)s.'),
{'id': volume.id})
return
def _clone_image_volume_and_add_location(self, ctx, volume, image_service,
image_meta):
"""Create a cloned volume and register its location to the image."""
if (image_meta['disk_format'] != 'raw' or
image_meta['container_format'] != 'bare'):
return False
image_volume_context = ctx
if self.driver.configuration.image_upload_use_internal_tenant:
internal_ctx = context.get_internal_tenant_context()
if internal_ctx:
image_volume_context = internal_ctx
image_volume = self._clone_image_volume(image_volume_context,
volume,
image_meta)
if not image_volume:
return False
uri = 'cinder://%s' % image_volume.id
image_registered = None
try:
image_registered = image_service.add_location(
ctx, image_meta['id'], uri, {})
except (exception.NotAuthorized, exception.Invalid,
exception.NotFound):
LOG.exception(_LE('Failed to register image volume location '
'%(uri)s.'), {'uri': uri})
if not image_registered:
LOG.warning(_LW('Registration of image volume URI %(uri)s '
'to image %(image_id)s failed.'),
{'uri': uri, 'image_id': image_meta['id']})
try:
self.delete_volume(image_volume_context, image_volume)
except exception.CinderException:
LOG.exception(_LE('Could not delete failed image volume '
'%(id)s.'), {'id': image_volume.id})
return False
image_volume_meta = {'glance_image_id': image_meta['id'],
'image_owner': ctx.project_id}
self.db.volume_metadata_update(image_volume_context,
image_volume.id,
image_volume_meta,
False)
return True
def copy_volume_to_image(self, context, volume_id, image_meta):
"""Uploads the specified volume to Glance.
image_meta is a dictionary containing the following keys:
'id', 'container_format', 'disk_format'
"""
payload = {'volume_id': volume_id, 'image_id': image_meta['id']}
image_service = None
try:
volume = self.db.volume_get(context, volume_id)
# NOTE(flaper87): Verify the driver is enabled
# before going forward. The exception will be caught
# and the volume status updated.
utils.require_driver_initialized(self.driver)
image_service, image_id = \
glance.get_remote_image_service(context, image_meta['id'])
if (self.driver.configuration.image_upload_use_cinder_backend
and self._clone_image_volume_and_add_location(
context, volume, image_service, image_meta)):
LOG.debug("Registered image volume location to glance "
"image-id: %(image_id)s.",
{'image_id': image_meta['id']},
resource=volume)
else:
self.driver.copy_volume_to_image(context, volume,
image_service, image_meta)
LOG.debug("Uploaded volume to glance image-id: %(image_id)s.",
{'image_id': image_meta['id']},
resource=volume)
except Exception as error:
LOG.error(_LE("Upload volume to image encountered an error "
"(image-id: %(image_id)s)."),
{'image_id': image_meta['id']},
resource=volume)
if image_service is not None:
# Deletes the image if it is in queued or saving state
self._delete_image(context, image_meta['id'], image_service)
with excutils.save_and_reraise_exception():
payload['message'] = six.text_type(error)
if isinstance(error, exception.ImageLimitExceeded):
self.message_api.create(
context, defined_messages.IMAGE_FROM_VOLUME_OVER_QUOTA,
context.project_id,
resource_type=resource_types.VOLUME,
resource_uuid=volume_id)
finally:
self.db.volume_update_status_based_on_attachment(context,
volume_id)
LOG.info(_LI("Copy volume to image completed successfully."),
resource=volume)
def _delete_image(self, context, image_id, image_service):
"""Deletes an image stuck in queued or saving state."""
try:
image_meta = image_service.show(context, image_id)
image_status = image_meta.get('status')
if image_status == 'queued' or image_status == 'saving':
LOG.warning(_LW("Deleting image in unexpected status: "
"%(image_status)s."),
{'image_status': image_status},
resource={'type': 'image', 'id': image_id})
image_service.delete(context, image_id)
except Exception:
LOG.warning(_LW("Image delete encountered an error."),
exc_info=True, resource={'type': 'image',
'id': image_id})
def initialize_connection(self, context, volume_id, connector,
volume=None):
"""Prepare volume for connection from host represented by connector.
This method calls the driver initialize_connection and returns
it to the caller. The connector parameter is a dictionary with
information about the host that will connect to the volume in the
following format::
{
'ip': ip,
'initiator': initiator,
}
ip: the ip address of the connecting machine
initiator: the iscsi initiator name of the connecting machine.
This can be None if the connecting machine does not support iscsi
connections.
driver is responsible for doing any necessary security setup and
returning a connection_info dictionary in the following format::
{
'driver_volume_type': driver_volume_type,
'data': data,
}
driver_volume_type: a string to identify the type of volume. This
can be used by the calling code to determine the
strategy for connecting to the volume. This could
be 'iscsi', 'rbd', 'sheepdog', etc.
data: this is the data that the calling code will use to connect
to the volume. Keep in mind that this will be serialized to
json in various places, so it should not contain any non-json
data types.
"""
# FIXME(bluex): Remove this in v3.0 of RPC API.
if volume is None:
# For older clients, mimic the old behavior and look up the volume
# by its volume_id.
volume = objects.Volume.get_by_id(context, volume_id)
# NOTE(flaper87): Verify the driver is enabled
# before going forward. The exception will be caught
# and the volume status updated.
utils.require_driver_initialized(self.driver)
try:
self.driver.validate_connector(connector)
except exception.InvalidConnectorException as err:
raise exception.InvalidInput(reason=six.text_type(err))
except Exception as err:
err_msg = (_("Validate volume connection failed "
"(error: %(err)s).") % {'err': six.text_type(err)})
LOG.error(err_msg, resource=volume)
raise exception.VolumeBackendAPIException(data=err_msg)
try:
model_update = self.driver.create_export(context.elevated(),
volume, connector)
except exception.CinderException:
err_msg = (_("Create export for volume failed."))
LOG.exception(err_msg, resource=volume)
raise exception.VolumeBackendAPIException(data=err_msg)
try:
if model_update:
volume.update(model_update)
volume.save()
except exception.CinderException as ex:
LOG.exception(_LE("Model update failed."), resource=volume)
raise exception.ExportFailure(reason=six.text_type(ex))
try:
conn_info = self.driver.initialize_connection(volume, connector)
except Exception as err:
err_msg = (_("Driver initialize connection failed "
"(error: %(err)s).") % {'err': six.text_type(err)})
LOG.exception(err_msg, resource=volume)
self.driver.remove_export(context.elevated(), volume)
raise exception.VolumeBackendAPIException(data=err_msg)
# Add qos_specs to connection info
typeid = volume.volume_type_id
specs = None
if typeid:
res = volume_types.get_volume_type_qos_specs(typeid)
qos = res['qos_specs']
# only pass qos_specs that is designated to be consumed by
# front-end, or both front-end and back-end.
if qos and qos.get('consumer') in ['front-end', 'both']:
specs = qos.get('specs')
qos_spec = dict(qos_specs=specs)
conn_info['data'].update(qos_spec)
# Add access_mode to connection info
volume_metadata = volume.admin_metadata
access_mode = volume_metadata.get('attached_mode')
if access_mode is None:
# NOTE(zhiyan): client didn't call 'os-attach' before
access_mode = ('ro'
if volume_metadata.get('readonly') == 'True'
else 'rw')
conn_info['data']['access_mode'] = access_mode
# Add encrypted flag to connection_info if not set in the driver.
if conn_info['data'].get('encrypted') is None:
encrypted = bool(volume.encryption_key_id)
conn_info['data']['encrypted'] = encrypted
# Add discard flag to connection_info if not set in the driver and
# configured to be reported.
if conn_info['data'].get('discard') is None:
discard_supported = (self.driver.configuration
.safe_get('report_discard_supported'))
if discard_supported:
conn_info['data']['discard'] = True
LOG.info(_LI("Initialize volume connection completed successfully."),
resource=volume)
return conn_info
def terminate_connection(self, context, volume_id, connector, force=False):
"""Cleanup connection from host represented by connector.
The format of connector is the same as for initialize_connection.
"""
# NOTE(flaper87): Verify the driver is enabled
# before going forward. The exception will be caught
# and the volume status updated.
utils.require_driver_initialized(self.driver)
volume_ref = self.db.volume_get(context, volume_id)
try:
self.driver.terminate_connection(volume_ref, connector,
force=force)
except Exception as err:
err_msg = (_('Terminate volume connection failed: %(err)s')
% {'err': six.text_type(err)})
LOG.exception(err_msg, resource=volume_ref)
raise exception.VolumeBackendAPIException(data=err_msg)
LOG.info(_LI("Terminate volume connection completed successfully."),
resource=volume_ref)
def remove_export(self, context, volume_id):
"""Removes an export for a volume."""
utils.require_driver_initialized(self.driver)
volume_ref = self.db.volume_get(context, volume_id)
try:
self.driver.remove_export(context, volume_ref)
except Exception:
msg = _("Remove volume export failed.")
LOG.exception(msg, resource=volume_ref)
raise exception.VolumeBackendAPIException(data=msg)
LOG.info(_LI("Remove volume export completed successfully."),
resource=volume_ref)
def accept_transfer(self, context, volume_id, new_user, new_project):
# NOTE(flaper87): Verify the driver is enabled
# before going forward. The exception will be caught
# and the volume status updated.
utils.require_driver_initialized(self.driver)
# NOTE(jdg): need elevated context as we haven't "given" the vol
# yet
volume_ref = self.db.volume_get(context.elevated(), volume_id)
# NOTE(jdg): Some drivers tie provider info (CHAP) to tenant
# for those that do allow them to return updated model info
model_update = self.driver.accept_transfer(context,
volume_ref,
new_user,
new_project)
if model_update:
try:
self.db.volume_update(context.elevated(),
volume_id,
model_update)
except exception.CinderException:
with excutils.save_and_reraise_exception():
LOG.exception(_LE("Update volume model for "
"transfer operation failed."),
resource=volume_ref)
self.db.volume_update(context.elevated(),
volume_id,
{'status': 'error'})
LOG.info(_LI("Transfer volume completed successfully."),
resource=volume_ref)
return model_update
def _connect_device(self, conn):
use_multipath = self.configuration.use_multipath_for_image_xfer
device_scan_attempts = self.configuration.num_volume_device_scan_tries
protocol = conn['driver_volume_type']
connector = utils.brick_get_connector(
protocol,
use_multipath=use_multipath,
device_scan_attempts=device_scan_attempts,
conn=conn)
vol_handle = connector.connect_volume(conn['data'])
root_access = True
if not connector.check_valid_device(vol_handle['path'], root_access):
if isinstance(vol_handle['path'], six.string_types):
raise exception.DeviceUnavailable(
path=vol_handle['path'],
reason=(_("Unable to access the backend storage via the "
"path %(path)s.") %
{'path': vol_handle['path']}))
else:
raise exception.DeviceUnavailable(
path=None,
reason=(_("Unable to access the backend storage via file "
"handle.")))
return {'conn': conn, 'device': vol_handle, 'connector': connector}
def _attach_volume(self, ctxt, volume, properties, remote=False,
attach_encryptor=False):
status = volume['status']
if remote:
rpcapi = volume_rpcapi.VolumeAPI()
try:
conn = rpcapi.initialize_connection(ctxt, volume, properties)
except Exception:
with excutils.save_and_reraise_exception():
LOG.error(_LE("Failed to attach volume %(vol)s."),
{'vol': volume['id']})
self.db.volume_update(ctxt, volume['id'],
{'status': status})
else:
conn = self.initialize_connection(ctxt, volume['id'], properties)
attach_info = self._connect_device(conn)
try:
if attach_encryptor and (
volume_types.is_encrypted(ctxt,
volume.volume_type_id)):
encryption = self.db.volume_encryption_metadata_get(
ctxt.elevated(), volume.id)
if encryption:
utils.brick_attach_volume_encryptor(ctxt,
attach_info,
encryption)
except Exception:
with excutils.save_and_reraise_exception():
LOG.error(_LE("Failed to attach volume encryptor"
" %(vol)s."), {'vol': volume['id']})
self._detach_volume(ctxt, attach_info, volume, properties)
return attach_info
def _detach_volume(self, ctxt, attach_info, volume, properties,
force=False, remote=False,
attach_encryptor=False):
connector = attach_info['connector']
if attach_encryptor and (
volume_types.is_encrypted(ctxt,
volume.volume_type_id)):
encryption = self.db.volume_encryption_metadata_get(
ctxt.elevated(), volume.id)
if encryption:
utils.brick_detach_volume_encryptor(attach_info, encryption)
connector.disconnect_volume(attach_info['conn']['data'],
attach_info['device'])
if remote:
rpcapi = volume_rpcapi.VolumeAPI()
rpcapi.terminate_connection(ctxt, volume, properties, force=force)
rpcapi.remove_export(ctxt, volume)
else:
try:
self.terminate_connection(ctxt, volume['id'], properties,
force=force)
self.remove_export(ctxt, volume['id'])
except Exception as err:
with excutils.save_and_reraise_exception():
LOG.error(_LE('Unable to terminate volume connection: '
'%(err)s.') % {'err': err})
def _copy_volume_data(self, ctxt, src_vol, dest_vol, remote=None):
"""Copy data from src_vol to dest_vol."""
LOG.debug('copy_data_between_volumes %(src)s -> %(dest)s.',
{'src': src_vol['name'], 'dest': dest_vol['name']})
attach_encryptor = False
# If the encryption method or key is changed, we have to
# copy data through dm-crypt.
if volume_types.volume_types_encryption_changed(
ctxt,
src_vol.volume_type_id,
dest_vol.volume_type_id):
attach_encryptor = True
properties = utils.brick_get_connector_properties()
dest_remote = remote in ['dest', 'both']
dest_attach_info = self._attach_volume(
ctxt, dest_vol, properties,
remote=dest_remote,
attach_encryptor=attach_encryptor)
try:
src_remote = remote in ['src', 'both']
src_attach_info = self._attach_volume(
ctxt, src_vol, properties,
remote=src_remote,
attach_encryptor=attach_encryptor)
except Exception:
with excutils.save_and_reraise_exception():
LOG.error(_LE("Failed to attach source volume for copy."))
self._detach_volume(ctxt, dest_attach_info, dest_vol,
properties, remote=dest_remote,
attach_encryptor=attach_encryptor)
# Check the backend capabilities of migration destination host.
rpcapi = volume_rpcapi.VolumeAPI()
capabilities = rpcapi.get_capabilities(ctxt, dest_vol['host'],
False)
sparse_copy_volume = bool(capabilities and
capabilities.get('sparse_copy_volume',
False))
copy_error = True
try:
size_in_mb = int(src_vol['size']) * units.Ki # vol size is in GB
vol_utils.copy_volume(src_attach_info['device']['path'],
dest_attach_info['device']['path'],
size_in_mb,
self.configuration.volume_dd_blocksize,
sparse=sparse_copy_volume)
copy_error = False
except Exception:
with excutils.save_and_reraise_exception():
LOG.error(_LE("Failed to copy volume %(src)s to %(dest)s."),
{'src': src_vol['id'], 'dest': dest_vol['id']})
finally:
try:
self._detach_volume(ctxt, dest_attach_info, dest_vol,
properties, force=copy_error,
remote=dest_remote,
attach_encryptor=attach_encryptor)
finally:
self._detach_volume(ctxt, src_attach_info, src_vol,
properties, force=copy_error,
remote=src_remote,
attach_encryptor=attach_encryptor)
def _migrate_volume_generic(self, ctxt, volume, host, new_type_id):
rpcapi = volume_rpcapi.VolumeAPI()
# Create new volume on remote host
skip = self._VOLUME_CLONE_SKIP_PROPERTIES | {'host'}
new_vol_values = {k: volume[k] for k in set(volume.keys()) - skip}
if new_type_id:
new_vol_values['volume_type_id'] = new_type_id
if volume_types.volume_types_encryption_changed(
ctxt, volume.volume_type_id, new_type_id):
encryption_key_id = vol_utils.create_encryption_key(
ctxt, self.key_manager, new_type_id)
new_vol_values['encryption_key_id'] = encryption_key_id
new_volume = objects.Volume(
context=ctxt,
host=host['host'],
status='creating',
attach_status='detached',
migration_status='target:%s' % volume['id'],
**new_vol_values
)
new_volume.create()
rpcapi.create_volume(ctxt, new_volume, host['host'],
None, None, allow_reschedule=False)
# Wait for new_volume to become ready
starttime = time.time()
deadline = starttime + CONF.migration_create_volume_timeout_secs
# TODO(thangp): Replace get_by_id with refresh when it is available
new_volume = objects.Volume.get_by_id(ctxt, new_volume.id)
tries = 0
while new_volume.status != 'available':
tries += 1
now = time.time()
if new_volume.status == 'error':
msg = _("failed to create new_volume on destination host")
self._clean_temporary_volume(ctxt, volume,
new_volume,
clean_db_only=True)
raise exception.VolumeMigrationFailed(reason=msg)
elif now > deadline:
msg = _("timeout creating new_volume on destination host")
self._clean_temporary_volume(ctxt, volume,
new_volume,
clean_db_only=True)
raise exception.VolumeMigrationFailed(reason=msg)
else:
time.sleep(tries ** 2)
# TODO(thangp): Replace get_by_id with refresh when it is
# available
new_volume = objects.Volume.get_by_id(ctxt, new_volume.id)
# Copy the source volume to the destination volume
try:
attachments = volume.volume_attachment
if not attachments:
# Pre- and post-copy driver-specific actions
self.driver.before_volume_copy(ctxt, volume, new_volume,
remote='dest')
self._copy_volume_data(ctxt, volume, new_volume, remote='dest')
self.driver.after_volume_copy(ctxt, volume, new_volume,
remote='dest')
# The above call is synchronous so we complete the migration
self.migrate_volume_completion(ctxt, volume.id,
new_volume.id,
error=False,
volume=volume,
new_volume=new_volume)
else:
nova_api = compute.API()
# This is an async call to Nova, which will call the completion
# when it's done
for attachment in attachments:
instance_uuid = attachment['instance_uuid']
nova_api.update_server_volume(ctxt, instance_uuid,
volume.id,
new_volume.id)
except Exception:
with excutils.save_and_reraise_exception():
LOG.exception(_LE(
"Failed to copy volume %(vol1)s to %(vol2)s"), {
'vol1': volume.id, 'vol2': new_volume.id})
self._clean_temporary_volume(ctxt, volume,
new_volume)
def _clean_temporary_volume(self, ctxt, volume, new_volume,
clean_db_only=False):
# If we're in the migrating phase, we need to cleanup
# destination volume because source volume is remaining
if volume.migration_status == 'migrating':
try:
if clean_db_only:
# The temporary volume is not created, only DB data
# is created
new_volume.destroy()
else:
# The temporary volume is already created
rpcapi = volume_rpcapi.VolumeAPI()
rpcapi.delete_volume(ctxt, new_volume)
except exception.VolumeNotFound:
LOG.info(_LI("Couldn't find the temporary volume "
"%(vol)s in the database. There is no need "
"to clean up this volume."),
{'vol': new_volume.id})
else:
# If we're in the completing phase don't delete the
# destination because we may have already deleted the
# source! But the migration_status in database should
# be cleared to handle volume after migration failure
try:
new_volume.migration_status = None
new_volume.save()
except exception.VolumeNotFound:
LOG.info(_LI("Couldn't find destination volume "
"%(vol)s in the database. The entry might be "
"successfully deleted during migration "
"completion phase."),
{'vol': new_volume.id})
LOG.warning(_LW("Failed to migrate volume. The destination "
"volume %(vol)s is not deleted since the "
"source volume may have been deleted."),
{'vol': new_volume.id})
def migrate_volume_completion(self, ctxt, volume_id, new_volume_id,
error=False, volume=None, new_volume=None):
# FIXME(dulek): Remove this in v3.0 of RPC API.
if volume is None or new_volume is None:
# For older clients, mimic the old behavior and look up the volume
# by its volume_id.
volume = objects.Volume.get_by_id(ctxt, volume_id)
new_volume = objects.Volume.get_by_id(ctxt, new_volume_id)
try:
# NOTE(flaper87): Verify the driver is enabled
# before going forward. The exception will be caught
# and the migration status updated.
utils.require_driver_initialized(self.driver)
except exception.DriverNotInitialized:
with excutils.save_and_reraise_exception():
volume.migration_status = 'error'
volume.save()
LOG.debug("migrate_volume_completion: completing migration for "
"volume %(vol1)s (temporary volume %(vol2)s",
{'vol1': volume.id, 'vol2': new_volume.id})
rpcapi = volume_rpcapi.VolumeAPI()
orig_volume_status = volume.previous_status
if error:
LOG.info(_LI("migrate_volume_completion is cleaning up an error "
"for volume %(vol1)s (temporary volume %(vol2)s"),
{'vol1': volume['id'], 'vol2': new_volume.id})
rpcapi.delete_volume(ctxt, new_volume)
updates = {'migration_status': 'error',
'status': orig_volume_status}
volume.update(updates)
volume.save()
return volume.id
volume.migration_status = 'completing'
volume.save()
# Detach the source volume (if it fails, don't fail the migration)
# As after detach and refresh, volume_attchments will be None.
# We keep volume_attachment for later attach.
if orig_volume_status == 'in-use':
attachments = volume.volume_attachment
else:
attachments = None
try:
for attachment in attachments:
self.detach_volume(ctxt, volume.id, attachment['id'])
except Exception as ex:
LOG.error(_LE("Detach migration source volume failed: %(err)s"),
{'err': ex}, resource=volume)
# Give driver (new_volume) a chance to update things as needed
# after a successful migration.
# Note this needs to go through rpc to the host of the new volume
# the current host and driver object is for the "existing" volume.
rpcapi.update_migrated_volume(ctxt, volume, new_volume,
orig_volume_status)
volume.refresh()
new_volume.refresh()
# Swap src and dest DB records so we can continue using the src id and
# asynchronously delete the destination id
updated_new = volume.finish_volume_migration(new_volume)
updates = {'status': orig_volume_status,
'previous_status': volume.status,
'migration_status': 'success'}
if orig_volume_status == 'in-use':
for attachment in attachments:
rpcapi.attach_volume(ctxt, volume,
attachment['instance_uuid'],
attachment['attached_host'],
attachment['mountpoint'],
'rw')
volume.update(updates)
volume.save()
# Asynchronous deletion of the source volume in the back-end (now
# pointed by the target volume id)
try:
rpcapi.delete_volume(ctxt, updated_new)
except Exception as ex:
LOG.error(_LE('Failed to request async delete of migration source '
'vol %(vol)s: %(err)s'),
{'vol': volume.id, 'err': ex})
LOG.info(_LI("Complete-Migrate volume completed successfully."),
resource=volume)
return volume.id
def migrate_volume(self, ctxt, volume_id, host, force_host_copy=False,
new_type_id=None, volume=None):
"""Migrate the volume to the specified host (called on source host)."""
# FIXME(dulek): Remove this in v3.0 of RPC API.
if volume is None:
# For older clients, mimic the old behavior and look up the volume
# by its volume_id.
volume = objects.Volume.get_by_id(ctxt, volume_id)
try:
# NOTE(flaper87): Verify the driver is enabled
# before going forward. The exception will be caught
# and the migration status updated.
utils.require_driver_initialized(self.driver)
except exception.DriverNotInitialized:
with excutils.save_and_reraise_exception():
volume.migration_status = 'error'
volume.save()
model_update = None
moved = False
status_update = None
if volume.status in ('retyping', 'maintenance'):
status_update = {'status': volume.previous_status}
volume.migration_status = 'migrating'
volume.save()
if not force_host_copy and new_type_id is None:
try:
LOG.debug("Issue driver.migrate_volume.", resource=volume)
moved, model_update = self.driver.migrate_volume(ctxt,
volume,
host)
if moved:
updates = {'host': host['host'],
'migration_status': 'success',
'previous_status': volume.status}
if status_update:
updates.update(status_update)
if model_update:
updates.update(model_update)
volume.update(updates)
volume.save()
except Exception:
with excutils.save_and_reraise_exception():
updates = {'migration_status': 'error'}
if status_update:
updates.update(status_update)
volume.update(updates)
volume.save()
if not moved:
try:
self._migrate_volume_generic(ctxt, volume, host,
new_type_id)
except Exception:
with excutils.save_and_reraise_exception():
updates = {'migration_status': 'error'}
if status_update:
updates.update(status_update)
volume.update(updates)
volume.save()
LOG.info(_LI("Migrate volume completed successfully."),
resource=volume)
@periodic_task.periodic_task
def _report_driver_status(self, context):
if not self.driver.initialized:
if self.driver.configuration.config_group is None:
config_group = ''
else:
config_group = ('(config name %s)' %
self.driver.configuration.config_group)
LOG.warning(_LW("Update driver status failed: %(config_group)s "
"is uninitialized."),
{'config_group': config_group},
resource={'type': 'driver',
'id': self.driver.__class__.__name__})
else:
volume_stats = self.driver.get_volume_stats(refresh=True)
if self.extra_capabilities:
volume_stats.update(self.extra_capabilities)
if volume_stats:
# Append volume stats with 'allocated_capacity_gb'
self._append_volume_stats(volume_stats)
# Append filter and goodness function if needed
volume_stats = (
self._append_filter_goodness_functions(volume_stats))
# queue it to be sent to the Schedulers.
self.update_service_capabilities(volume_stats)
def _append_volume_stats(self, vol_stats):
pools = vol_stats.get('pools', None)
if pools and isinstance(pools, list):
for pool in pools:
pool_name = pool['pool_name']
try:
pool_stats = self.stats['pools'][pool_name]
except KeyError:
# Pool not found in volume manager
pool_stats = dict(allocated_capacity_gb=0)
pool.update(pool_stats)
def _append_filter_goodness_functions(self, volume_stats):
"""Returns volume_stats updated as needed."""
# Append filter_function if needed
if 'filter_function' not in volume_stats:
volume_stats['filter_function'] = (
self.driver.get_filter_function())
# Append goodness_function if needed
if 'goodness_function' not in volume_stats:
volume_stats['goodness_function'] = (
self.driver.get_goodness_function())
return volume_stats
def publish_service_capabilities(self, context):
"""Collect driver status and then publish."""
self._report_driver_status(context)
self._publish_service_capabilities(context)
def _notify_about_volume_usage(self,
context,
volume,
event_suffix,
extra_usage_info=None):
vol_utils.notify_about_volume_usage(
context, volume, event_suffix,
extra_usage_info=extra_usage_info, host=self.host)
def _notify_about_snapshot_usage(self,
context,
snapshot,
event_suffix,
extra_usage_info=None):
vol_utils.notify_about_snapshot_usage(
context, snapshot, event_suffix,
extra_usage_info=extra_usage_info, host=self.host)
def _notify_about_consistencygroup_usage(self,
context,
group,
event_suffix,
volumes=None,
extra_usage_info=None):
vol_utils.notify_about_consistencygroup_usage(
context, group, event_suffix,
extra_usage_info=extra_usage_info, host=self.host)
if not volumes:
volumes = self.db.volume_get_all_by_group(context, group.id)
if volumes:
for volume in volumes:
vol_utils.notify_about_volume_usage(
context, volume, event_suffix,
extra_usage_info=extra_usage_info, host=self.host)
def _notify_about_group_usage(self,
context,
group,
event_suffix,
volumes=None,
extra_usage_info=None):
vol_utils.notify_about_group_usage(
context, group, event_suffix,
extra_usage_info=extra_usage_info, host=self.host)
if not volumes:
volumes = self.db.volume_get_all_by_generic_group(
context, group.id)
if volumes:
for volume in volumes:
vol_utils.notify_about_volume_usage(
context, volume, event_suffix,
extra_usage_info=extra_usage_info, host=self.host)
def _notify_about_cgsnapshot_usage(self,
context,
cgsnapshot,
event_suffix,
snapshots=None,
extra_usage_info=None):
vol_utils.notify_about_cgsnapshot_usage(
context, cgsnapshot, event_suffix,
extra_usage_info=extra_usage_info, host=self.host)
if not snapshots:
snapshots = objects.SnapshotList.get_all_for_cgsnapshot(
context, cgsnapshot.id)
if snapshots:
for snapshot in snapshots:
vol_utils.notify_about_snapshot_usage(
context, snapshot, event_suffix,
extra_usage_info=extra_usage_info, host=self.host)
def _notify_about_group_snapshot_usage(self,
context,
group_snapshot,
event_suffix,
snapshots=None,
extra_usage_info=None):
vol_utils.notify_about_group_snapshot_usage(
context, group_snapshot, event_suffix,
extra_usage_info=extra_usage_info, host=self.host)
if not snapshots:
snapshots = objects.SnapshotList.get_all_for_group_snapshot(
context, group_snapshot.id)
if snapshots:
for snapshot in snapshots:
vol_utils.notify_about_snapshot_usage(
context, snapshot, event_suffix,
extra_usage_info=extra_usage_info, host=self.host)
def extend_volume(self, context, volume_id, new_size, reservations,
volume=None):
# FIXME(dulek): Remove this in v3.0 of RPC API.
if volume is None:
# For older clients, mimic the old behavior and look up the volume
# by its volume_id.
volume = objects.Volume.get_by_id(context, volume_id)
try:
# NOTE(flaper87): Verify the driver is enabled
# before going forward. The exception will be caught
# and the volume status updated.
utils.require_driver_initialized(self.driver)
except exception.DriverNotInitialized:
with excutils.save_and_reraise_exception():
volume.status = 'error_extending'
volume.save()
project_id = volume.project_id
size_increase = (int(new_size)) - volume.size
self._notify_about_volume_usage(context, volume, "resize.start")
try:
self.driver.extend_volume(volume, new_size)
except Exception:
LOG.exception(_LE("Extend volume failed."),
resource=volume)
try:
self.db.volume_update(context, volume.id,
{'status': 'error_extending'})
raise exception.CinderException(_("Volume %s: Error trying "
"to extend volume") %
volume.id)
finally:
QUOTAS.rollback(context, reservations, project_id=project_id)
return
QUOTAS.commit(context, reservations, project_id=project_id)
volume.update({'size': int(new_size), 'status': 'available'})
volume.save()
pool = vol_utils.extract_host(volume.host, 'pool')
if pool is None:
# Legacy volume, put them into default pool
pool = self.driver.configuration.safe_get(
'volume_backend_name') or vol_utils.extract_host(
volume.host, 'pool', True)
try:
self.stats['pools'][pool]['allocated_capacity_gb'] += size_increase
except KeyError:
self.stats['pools'][pool] = dict(
allocated_capacity_gb=size_increase)
self._notify_about_volume_usage(
context, volume, "resize.end",
extra_usage_info={'size': int(new_size)})
LOG.info(_LI("Extend volume completed successfully."),
resource=volume)
def retype(self, context, volume_id, new_type_id, host,
migration_policy='never', reservations=None,
volume=None, old_reservations=None):
def _retype_error(context, volume, old_reservations,
new_reservations, status_update):
try:
volume.update(status_update)
volume.save()
finally:
QUOTAS.rollback(context, old_reservations)
QUOTAS.rollback(context, new_reservations)
# FIXME(dulek): Remove this in v3.0 of RPC API.
if volume is None:
# For older clients, mimic the old behavior and look up the volume
# by its volume_id.
volume = objects.Volume.get_by_id(context, volume_id)
status_update = {'status': volume.previous_status}
if context.project_id != volume.project_id:
project_id = volume.project_id
else:
project_id = context.project_id
try:
# NOTE(flaper87): Verify the driver is enabled
# before going forward. The exception will be caught
# and the volume status updated.
utils.require_driver_initialized(self.driver)
except exception.DriverNotInitialized:
with excutils.save_and_reraise_exception():
# NOTE(flaper87): Other exceptions in this method don't
# set the volume status to error. Should that be done
# here? Setting the volume back to it's original status
# for now.
volume.update(status_update)
volume.save()
# If old_reservations has been passed in from the API, we should
# skip quotas.
# TODO(ntpttr): These reservation checks are left in to be backwards
# compatible with Liberty and can be removed in N.
if not old_reservations:
# Get old reservations
try:
reserve_opts = {'volumes': -1, 'gigabytes': -volume.size}
QUOTAS.add_volume_type_opts(context,
reserve_opts,
volume.volume_type_id)
# NOTE(wanghao): We don't need to reserve volumes and gigabytes
# quota for retyping operation since they didn't changed, just
# reserve volume_type and type gigabytes is fine.
reserve_opts.pop('volumes')
reserve_opts.pop('gigabytes')
old_reservations = QUOTAS.reserve(context,
project_id=project_id,
**reserve_opts)
except Exception:
volume.update(status_update)
volume.save()
msg = _("Failed to update quota usage while retyping volume.")
LOG.exception(msg, resource=volume)
raise exception.CinderException(msg)
# We already got the new reservations
new_reservations = reservations
# If volume types have the same contents, no need to do anything
retyped = False
diff, all_equal = volume_types.volume_types_diff(
context, volume.volume_type_id, new_type_id)
if all_equal:
retyped = True
# Call driver to try and change the type
retype_model_update = None
# NOTE(jdg): Check to see if the destination host is the same
# as the current. If it's not don't call the driver.retype
# method, otherwise drivers that implement retype may report
# success, but it's invalid in the case of a migrate.
# We assume that those that support pools do this internally
# so we strip off the pools designation
if (not retyped and
not diff.get('encryption') and
vol_utils.hosts_are_equivalent(self.driver.host,
host['host'])):
try:
new_type = volume_types.get_volume_type(context, new_type_id)
ret = self.driver.retype(context,
volume,
new_type,
diff,
host)
# Check if the driver retype provided a model update or
# just a retype indication
if type(ret) == tuple:
retyped, retype_model_update = ret
else:
retyped = ret
if retyped:
LOG.info(_LI("Volume %s: retyped successfully"), volume.id)
except Exception:
retyped = False
LOG.exception(_LE("Volume %s: driver error when trying to "
"retype, falling back to generic "
"mechanism."), volume.id)
# We could not change the type, so we need to migrate the volume, where
# the destination volume will be of the new type
if not retyped:
if migration_policy == 'never':
_retype_error(context, volume, old_reservations,
new_reservations, status_update)
msg = _("Retype requires migration but is not allowed.")
raise exception.VolumeMigrationFailed(reason=msg)
snaps = objects.SnapshotList.get_all_for_volume(context,
volume.id)
if snaps:
_retype_error(context, volume, old_reservations,
new_reservations, status_update)
msg = _("Volume must not have snapshots.")
LOG.error(msg)
raise exception.InvalidVolume(reason=msg)
# Don't allow volume with replicas to be migrated
rep_status = volume.replication_status
if rep_status is not None and rep_status != 'disabled':
_retype_error(context, volume, old_reservations,
new_reservations, status_update)
msg = _("Volume must not be replicated.")
LOG.error(msg)
raise exception.InvalidVolume(reason=msg)
volume.migration_status = 'starting'
volume.save()
try:
self.migrate_volume(context, volume.id, host,
new_type_id=new_type_id)
except Exception:
with excutils.save_and_reraise_exception():
_retype_error(context, volume, old_reservations,
new_reservations, status_update)
else:
model_update = {'volume_type_id': new_type_id,
'host': host['host'],
'status': status_update['status']}
if retype_model_update:
model_update.update(retype_model_update)
volume.update(model_update)
volume.save()
if old_reservations:
QUOTAS.commit(context, old_reservations, project_id=project_id)
if new_reservations:
QUOTAS.commit(context, new_reservations, project_id=project_id)
self._notify_about_volume_usage(
context, volume, "retype",
extra_usage_info={'volume_type': new_type_id})
self.publish_service_capabilities(context)
LOG.info(_LI("Retype volume completed successfully."),
resource=volume)
def manage_existing(self, ctxt, volume_id, ref=None, volume=None):
# FIXME(dulek): Remove this in v3.0 of RPC API.
if volume is None:
# For older clients, mimic the old behavior and look up the volume
# by its volume_id.
volume = objects.Volume.get_by_id(ctxt, volume_id)
vol_ref = self._run_manage_existing_flow_engine(
ctxt, volume, ref)
self._update_stats_for_managed(vol_ref)
LOG.info(_LI("Manage existing volume completed successfully."),
resource=vol_ref)
return vol_ref.id
def _update_stats_for_managed(self, volume_reference):
# Update volume stats
pool = vol_utils.extract_host(volume_reference.host, 'pool')
if pool is None:
# Legacy volume, put them into default pool
pool = self.driver.configuration.safe_get(
'volume_backend_name') or vol_utils.extract_host(
volume_reference.host, 'pool', True)
try:
self.stats['pools'][pool]['allocated_capacity_gb'] \
+= volume_reference.size
except KeyError:
self.stats['pools'][pool] = dict(
allocated_capacity_gb=volume_reference.size)
def _run_manage_existing_flow_engine(self, ctxt, volume, ref):
try:
flow_engine = manage_existing.get_flow(
ctxt,
self.db,
self.driver,
self.host,
volume,
ref,
)
except Exception:
msg = _("Failed to create manage_existing flow.")
LOG.exception(msg, resource={'type': 'volume', 'id': volume.id})
raise exception.CinderException(msg)
with flow_utils.DynamicLogListener(flow_engine, logger=LOG):
flow_engine.run()
# Fetch created volume from storage
vol_ref = flow_engine.storage.fetch('volume')
return vol_ref
def get_manageable_volumes(self, ctxt, marker, limit, offset, sort_keys,
sort_dirs):
try:
utils.require_driver_initialized(self.driver)
except exception.DriverNotInitialized:
with excutils.save_and_reraise_exception():
LOG.exception(_LE("Listing manageable volumes failed, due "
"to uninitialized driver."))
cinder_volumes = objects.VolumeList.get_all_by_host(ctxt, self.host)
try:
driver_entries = self.driver.get_manageable_volumes(
cinder_volumes, marker, limit, offset, sort_keys, sort_dirs)
except Exception:
with excutils.save_and_reraise_exception():
LOG.exception(_LE("Listing manageable volumes failed, due "
"to driver error."))
return driver_entries
def promote_replica(self, ctxt, volume_id):
"""Promote volume replica secondary to be the primary volume."""
volume = self.db.volume_get(ctxt, volume_id)
model_update = None
try:
utils.require_driver_initialized(self.driver)
except exception.DriverNotInitialized:
with excutils.save_and_reraise_exception():
LOG.exception(_LE("Promote volume replica failed."),
resource=volume)
try:
model_update = self.driver.promote_replica(ctxt, volume)
except exception.CinderException:
err_msg = (_('Error promoting secondary volume to primary'))
raise exception.ReplicationError(reason=err_msg,
volume_id=volume_id)
try:
if model_update:
volume = self.db.volume_update(ctxt,
volume_id,
model_update)
except exception.CinderException:
err_msg = (_("Failed updating model"
" with driver provided model %(model)s") %
{'model': model_update})
raise exception.ReplicationError(reason=err_msg,
volume_id=volume_id)
LOG.info(_LI("Promote volume replica completed successfully."),
resource=volume)
def reenable_replication(self, ctxt, volume_id):
"""Re-enable replication of secondary volume with primary volumes."""
volume = self.db.volume_get(ctxt, volume_id)
model_update = None
try:
utils.require_driver_initialized(self.driver)
except exception.DriverNotInitialized:
with excutils.save_and_reraise_exception():
LOG.exception(_LE("Sync volume replica failed."),
resource=volume)
try:
model_update = self.driver.reenable_replication(ctxt, volume)
except exception.CinderException:
err_msg = (_("Synchronizing secondary volume to primary failed."))
raise exception.ReplicationError(reason=err_msg,
volume_id=volume_id)
try:
if model_update:
volume = self.db.volume_update(ctxt,
volume_id,
model_update)
except exception.CinderException:
err_msg = (_("Failed updating model"
" with driver provided model %(model)s") %
{'model': model_update})
raise exception.ReplicationError(reason=err_msg,
volume_id=volume_id)
def _update_replication_relationship_status(self, ctxt):
# Only want volumes that do not have a 'disabled' replication status
filters = {'replication_status': ['active', 'copying', 'error',
'active-stopped', 'inactive']}
volumes = self.db.volume_get_all_by_host(ctxt, self.host,
filters=filters)
for vol in volumes:
model_update = None
try:
model_update = self.driver.get_replication_status(
ctxt, vol)
if model_update:
self.db.volume_update(ctxt, vol['id'], model_update)
except Exception:
LOG.exception(_LE("Get replication status for volume failed."),
resource=vol)
def create_consistencygroup(self, context, group):
"""Creates the consistency group."""
return self._create_group(context, group, False)
def create_group(self, context, group):
"""Creates the group."""
return self._create_group(context, group)
def _create_group(self, context, group, is_generic_group=True):
context = context.elevated()
status = fields.GroupStatus.AVAILABLE
model_update = None
if is_generic_group:
self._notify_about_group_usage(
context, group, "create.start")
else:
self._notify_about_consistencygroup_usage(
context, group, "create.start")
try:
utils.require_driver_initialized(self.driver)
LOG.info(_LI("Group %s: creating"), group.name)
if is_generic_group:
try:
model_update = self.driver.create_group(context,
group)
except NotImplementedError:
model_update = self._create_group_generic(context,
group)
else:
model_update = self.driver.create_consistencygroup(context,
group)
if model_update:
if (model_update['status'] ==
fields.GroupStatus.ERROR):
msg = (_('Create group failed.'))
LOG.error(msg,
resource={'type': 'group',
'id': group.id})
raise exception.VolumeDriverException(message=msg)
else:
group.update(model_update)
group.save()
except Exception:
with excutils.save_and_reraise_exception():
group.status = fields.GroupStatus.ERROR
group.save()
LOG.error(_LE("Group %s: create failed"),
group.name)
group.status = status
group.created_at = timeutils.utcnow()
group.save()
LOG.info(_LI("Group %s: created successfully"),
group.name)
if is_generic_group:
self._notify_about_group_usage(
context, group, "create.end")
else:
self._notify_about_consistencygroup_usage(
context, group, "create.end")
LOG.info(_LI("Create group completed successfully."),
resource={'type': 'group',
'id': group.id})
return group
def create_consistencygroup_from_src(self, context, group,
cgsnapshot=None, source_cg=None):
"""Creates the consistency group from source.
The source can be a CG snapshot or a source CG.
"""
source_name = None
snapshots = None
source_vols = None
try:
volumes = self.db.volume_get_all_by_group(context, group.id)
if cgsnapshot:
try:
# Check if cgsnapshot still exists
cgsnapshot = objects.CGSnapshot.get_by_id(
context, cgsnapshot.id)
except exception.CgSnapshotNotFound:
LOG.error(_LE("Create consistency group "
"from snapshot-%(snap)s failed: "
"SnapshotNotFound."),
{'snap': cgsnapshot.id},
resource={'type': 'consistency_group',
'id': group.id})
raise
source_name = _("snapshot-%s") % cgsnapshot.id
snapshots = objects.SnapshotList.get_all_for_cgsnapshot(
context, cgsnapshot.id)
for snap in snapshots:
if (snap.status not in
VALID_CREATE_CG_SRC_SNAP_STATUS):
msg = (_("Cannot create consistency group "
"%(group)s because snapshot %(snap)s is "
"not in a valid state. Valid states are: "
"%(valid)s.") %
{'group': group.id,
'snap': snap['id'],
'valid': VALID_CREATE_CG_SRC_SNAP_STATUS})
raise exception.InvalidConsistencyGroup(reason=msg)
if source_cg:
try:
source_cg = objects.ConsistencyGroup.get_by_id(
context, source_cg.id)
except exception.ConsistencyGroupNotFound:
LOG.error(_LE("Create consistency group "
"from source cg-%(cg)s failed: "
"ConsistencyGroupNotFound."),
{'cg': source_cg.id},
resource={'type': 'consistency_group',
'id': group.id})
raise
source_name = _("cg-%s") % source_cg.id
source_vols = self.db.volume_get_all_by_group(
context, source_cg.id)
for source_vol in source_vols:
if (source_vol['status'] not in
VALID_CREATE_CG_SRC_CG_STATUS):
msg = (_("Cannot create consistency group "
"%(group)s because source volume "
"%(source_vol)s is not in a valid "
"state. Valid states are: "
"%(valid)s.") %
{'group': group.id,
'source_vol': source_vol['id'],
'valid': VALID_CREATE_CG_SRC_CG_STATUS})
raise exception.InvalidConsistencyGroup(reason=msg)
# Sort source snapshots so that they are in the same order as their
# corresponding target volumes.
sorted_snapshots = None
if cgsnapshot and snapshots:
sorted_snapshots = self._sort_snapshots(volumes, snapshots)
# Sort source volumes so that they are in the same order as their
# corresponding target volumes.
sorted_source_vols = None
if source_cg and source_vols:
sorted_source_vols = self._sort_source_vols(volumes,
source_vols)
self._notify_about_consistencygroup_usage(
context, group, "create.start")
utils.require_driver_initialized(self.driver)
model_update, volumes_model_update = (
self.driver.create_consistencygroup_from_src(
context, group, volumes, cgsnapshot,
sorted_snapshots, source_cg, sorted_source_vols))
if volumes_model_update:
for update in volumes_model_update:
self.db.volume_update(context, update['id'], update)
if model_update:
group.update(model_update)
group.save()
except Exception:
with excutils.save_and_reraise_exception():
group.status = 'error'
group.save()
LOG.error(_LE("Create consistency group "
"from source %(source)s failed."),
{'source': source_name},
resource={'type': 'consistency_group',
'id': group.id})
# Update volume status to 'error' as well.
for vol in volumes:
self.db.volume_update(
context, vol['id'], {'status': 'error'})
now = timeutils.utcnow()
status = 'available'
for vol in volumes:
update = {'status': status, 'created_at': now}
self._update_volume_from_src(context, vol, update, group=group)
self._update_allocated_capacity(vol)
group.status = status
group.created_at = now
group.save()
self._notify_about_consistencygroup_usage(
context, group, "create.end")
LOG.info(_LI("Create consistency group "
"from source-%(source)s completed successfully."),
{'source': source_name},
resource={'type': 'consistency_group',
'id': group.id})
return group
def create_group_from_src(self, context, group,
group_snapshot=None, source_group=None):
"""Creates the group from source.
The source can be a group snapshot or a source group.
"""
source_name = None
snapshots = None
source_vols = None
try:
volumes = objects.VolumeList.get_all_by_generic_group(context,
group.id)
if group_snapshot:
try:
# Check if group_snapshot still exists
group_snapshot = objects.GroupSnapshot.get_by_id(
context, group_snapshot.id)
except exception.GroupSnapshotNotFound:
LOG.error(_LE("Create group "
"from snapshot-%(snap)s failed: "
"SnapshotNotFound."),
{'snap': group_snapshot.id},
resource={'type': 'group',
'id': group.id})
raise
source_name = _("snapshot-%s") % group_snapshot.id
snapshots = objects.SnapshotList.get_all_for_group_snapshot(
context, group_snapshot.id)
for snap in snapshots:
if (snap.status not in
VALID_CREATE_GROUP_SRC_SNAP_STATUS):
msg = (_("Cannot create group "
"%(group)s because snapshot %(snap)s is "
"not in a valid state. Valid states are: "
"%(valid)s.") %
{'group': group.id,
'snap': snap['id'],
'valid': VALID_CREATE_GROUP_SRC_SNAP_STATUS})
raise exception.InvalidGroup(reason=msg)
if source_group:
try:
source_group = objects.Group.get_by_id(
context, source_group.id)
except exception.GroupNotFound:
LOG.error(_LE("Create group "
"from source group-%(group)s failed: "
"GroupNotFound."),
{'group': source_group.id},
resource={'type': 'group',
'id': group.id})
raise
source_name = _("group-%s") % source_group.id
source_vols = objects.VolumeList.get_all_by_generic_group(
context, source_group.id)
for source_vol in source_vols:
if (source_vol.status not in
VALID_CREATE_GROUP_SRC_GROUP_STATUS):
msg = (_("Cannot create group "
"%(group)s because source volume "
"%(source_vol)s is not in a valid "
"state. Valid states are: "
"%(valid)s.") %
{'group': group.id,
'source_vol': source_vol.id,
'valid': VALID_CREATE_GROUP_SRC_GROUP_STATUS})
raise exception.InvalidGroup(reason=msg)
# Sort source snapshots so that they are in the same order as their
# corresponding target volumes.
sorted_snapshots = None
if group_snapshot and snapshots:
sorted_snapshots = self._sort_snapshots(volumes, snapshots)
# Sort source volumes so that they are in the same order as their
# corresponding target volumes.
sorted_source_vols = None
if source_group and source_vols:
sorted_source_vols = self._sort_source_vols(volumes,
source_vols)
self._notify_about_group_usage(
context, group, "create.start")
utils.require_driver_initialized(self.driver)
try:
model_update, volumes_model_update = (
self.driver.create_group_from_src(
context, group, volumes, group_snapshot,
sorted_snapshots, source_group, sorted_source_vols))
except NotImplementedError:
model_update, volumes_model_update = (
self._create_group_from_src_generic(
context, group, volumes, group_snapshot,
sorted_snapshots, source_group, sorted_source_vols))
if volumes_model_update:
for update in volumes_model_update:
self.db.volume_update(context, update['id'], update)
if model_update:
group.update(model_update)
group.save()
except Exception:
with excutils.save_and_reraise_exception():
group.status = 'error'
group.save()
LOG.error(_LE("Create group "
"from source %(source)s failed."),
{'source': source_name},
resource={'type': 'group',
'id': group.id})
# Update volume status to 'error' as well.
for vol in volumes:
vol.status = 'error'
vol.save()
now = timeutils.utcnow()
status = 'available'
for vol in volumes:
update = {'status': status, 'created_at': now}
self._update_volume_from_src(context, vol, update, group=group)
self._update_allocated_capacity(vol)
group.status = status
group.created_at = now
group.save()
self._notify_about_group_usage(
context, group, "create.end")
LOG.info(_LI("Create group "
"from source-%(source)s completed successfully."),
{'source': source_name},
resource={'type': 'group',
'id': group.id})
return group
def _create_group_from_src_generic(self, context, group, volumes,
group_snapshot=None, snapshots=None,
source_group=None, source_vols=None):
"""Creates a group from source.
:param context: the context of the caller.
:param group: the Group object to be created.
:param volumes: a list of volume objects in the group.
:param group_snapshot: the GroupSnapshot object as source.
:param snapshots: a list of snapshot objects in group_snapshot.
:param source_group: the Group object as source.
:param source_vols: a list of volume objects in the source_group.
:returns: model_update, volumes_model_update
"""
for vol in volumes:
try:
if snapshots:
for snapshot in snapshots:
if vol.snapshot_id == snapshot.id:
self.driver.create_volume_from_snapshot(
vol, snapshot)
break
except Exception:
raise
try:
if source_vols:
for source_vol in source_vols:
if vol.source_volid == source_vol.id:
self.driver.create_cloned_volume(vol, source_vol)
break
except Exception:
raise
return None, None
def _sort_snapshots(self, volumes, snapshots):
# Sort source snapshots so that they are in the same order as their
# corresponding target volumes. Each source snapshot in the snapshots
# list should have a corresponding target volume in the volumes list.
if not volumes or not snapshots or len(volumes) != len(snapshots):
msg = _("Input volumes or snapshots are invalid.")
LOG.error(msg)
raise exception.InvalidInput(reason=msg)
sorted_snapshots = []
for vol in volumes:
found_snaps = [snap for snap in snapshots
if snap['id'] == vol['snapshot_id']]
if not found_snaps:
LOG.error(_LE("Source snapshot cannot be found for target "
"volume %(volume_id)s."),
{'volume_id': vol['id']})
raise exception.SnapshotNotFound(
snapshot_id=vol['snapshot_id'])
sorted_snapshots.extend(found_snaps)
return sorted_snapshots
def _sort_source_vols(self, volumes, source_vols):
# Sort source volumes so that they are in the same order as their
# corresponding target volumes. Each source volume in the source_vols
# list should have a corresponding target volume in the volumes list.
if not volumes or not source_vols or len(volumes) != len(source_vols):
msg = _("Input volumes or source volumes are invalid.")
LOG.error(msg)
raise exception.InvalidInput(reason=msg)
sorted_source_vols = []
for vol in volumes:
found_source_vols = [source_vol for source_vol in source_vols
if source_vol['id'] == vol['source_volid']]
if not found_source_vols:
LOG.error(_LE("Source volumes cannot be found for target "
"volume %(volume_id)s."),
{'volume_id': vol['id']})
raise exception.VolumeNotFound(
volume_id=vol['source_volid'])
sorted_source_vols.extend(found_source_vols)
return sorted_source_vols
def _update_volume_from_src(self, context, vol, update, group=None):
try:
snapshot_id = vol.get('snapshot_id')
if snapshot_id:
snapshot = objects.Snapshot.get_by_id(context, snapshot_id)
orig_vref = self.db.volume_get(context,
snapshot.volume_id)
if orig_vref.bootable:
update['bootable'] = True
self.db.volume_glance_metadata_copy_to_volume(
context, vol['id'], snapshot_id)
except exception.SnapshotNotFound:
LOG.error(_LE("Source snapshot %(snapshot_id)s cannot be found."),
{'snapshot_id': vol['snapshot_id']})
self.db.volume_update(context, vol['id'],
{'status': 'error'})
if group:
group.status = 'error'
group.save()
raise
except exception.VolumeNotFound:
LOG.error(_LE("The source volume %(volume_id)s "
"cannot be found."),
{'volume_id': snapshot.volume_id})
self.db.volume_update(context, vol['id'],
{'status': 'error'})
if group:
group.status = 'error'
group.save()
raise
except exception.CinderException as ex:
LOG.error(_LE("Failed to update %(volume_id)s"
" metadata using the provided snapshot"
" %(snapshot_id)s metadata."),
{'volume_id': vol['id'],
'snapshot_id': vol['snapshot_id']})
self.db.volume_update(context, vol['id'],
{'status': 'error'})
if group:
group.status = 'error'
group.save()
raise exception.MetadataCopyFailure(reason=six.text_type(ex))
self.db.volume_update(context, vol['id'], update)
def _update_allocated_capacity(self, vol):
# Update allocated capacity in volume stats
pool = vol_utils.extract_host(vol['host'], 'pool')
if pool is None:
# Legacy volume, put them into default pool
pool = self.driver.configuration.safe_get(
'volume_backend_name') or vol_utils.extract_host(
vol['host'], 'pool', True)
try:
self.stats['pools'][pool]['allocated_capacity_gb'] += (
vol['size'])
except KeyError:
self.stats['pools'][pool] = dict(
allocated_capacity_gb=vol['size'])
def delete_consistencygroup(self, context, group):
"""Deletes consistency group and the volumes in the group."""
context = context.elevated()
project_id = group.project_id
if context.project_id != group.project_id:
project_id = group.project_id
else:
project_id = context.project_id
volumes = self.db.volume_get_all_by_group(context, group.id)
for volume_ref in volumes:
if volume_ref['attach_status'] == "attached":
# Volume is still attached, need to detach first
raise exception.VolumeAttached(volume_id=volume_ref['id'])
# self.host is 'host@backend'
# volume_ref['host'] is 'host@backend#pool'
# Extract host before doing comparison
if volume_ref['host']:
new_host = vol_utils.extract_host(volume_ref['host'])
if new_host != self.host:
raise exception.InvalidVolume(
reason=_("Volume is not local to this node"))
self._notify_about_consistencygroup_usage(
context, group, "delete.start")
volumes_model_update = None
model_update = None
try:
utils.require_driver_initialized(self.driver)
model_update, volumes_model_update = (
self.driver.delete_consistencygroup(context, group, volumes))
if volumes_model_update:
for volume in volumes_model_update:
update = {'status': volume['status']}
self.db.volume_update(context, volume['id'],
update)
# If we failed to delete a volume, make sure the status
# for the cg is set to error as well
if (volume['status'] in ['error_deleting', 'error'] and
model_update['status'] not in
['error_deleting', 'error']):
model_update['status'] = volume['status']
if model_update:
if model_update['status'] in ['error_deleting', 'error']:
msg = (_('Delete consistency group failed.'))
LOG.error(msg,
resource={'type': 'consistency_group',
'id': group.id})
raise exception.VolumeDriverException(message=msg)
else:
group.update(model_update)
group.save()
except Exception:
with excutils.save_and_reraise_exception():
group.status = 'error'
group.save()
# Update volume status to 'error' if driver returns
# None for volumes_model_update.
if not volumes_model_update:
for vol in volumes:
self.db.volume_update(
context, vol['id'], {'status': 'error'})
# Get reservations for group
try:
reserve_opts = {'consistencygroups': -1}
cgreservations = CGQUOTAS.reserve(context,
project_id=project_id,
**reserve_opts)
except Exception:
cgreservations = None
LOG.exception(_LE("Delete consistency group "
"failed to update usages."),
resource={'type': 'consistency_group',
'id': group.id})
for volume_ref in volumes:
# Get reservations for volume
try:
volume_id = volume_ref['id']
reserve_opts = {'volumes': -1,
'gigabytes': -volume_ref['size']}
QUOTAS.add_volume_type_opts(context,
reserve_opts,
volume_ref.get('volume_type_id'))
reservations = QUOTAS.reserve(context,
project_id=project_id,
**reserve_opts)
except Exception:
reservations = None
LOG.exception(_LE("Delete consistency group "
"failed to update usages."),
resource={'type': 'consistency_group',
'id': group.id})
# Delete glance metadata if it exists
self.db.volume_glance_metadata_delete_by_volume(context, volume_id)
self.db.volume_destroy(context, volume_id)
# Commit the reservations
if reservations:
QUOTAS.commit(context, reservations, project_id=project_id)
self.stats['allocated_capacity_gb'] -= volume_ref['size']
if cgreservations:
CGQUOTAS.commit(context, cgreservations,
project_id=project_id)
group.destroy()
self._notify_about_consistencygroup_usage(
context, group, "delete.end", volumes)
self.publish_service_capabilities(context)
LOG.info(_LI("Delete consistency group "
"completed successfully."),
resource={'type': 'consistency_group',
'id': group.id})
def delete_group(self, context, group):
"""Deletes group and the volumes in the group."""
context = context.elevated()
project_id = group.project_id
if context.project_id != group.project_id:
project_id = group.project_id
else:
project_id = context.project_id
volumes = objects.VolumeList.get_all_by_generic_group(
context, group.id)
for vol_obj in volumes:
if vol_obj.attach_status == "attached":
# Volume is still attached, need to detach first
raise exception.VolumeAttached(volume_id=vol_obj.id)
# self.host is 'host@backend'
# vol_obj.host is 'host@backend#pool'
# Extract host before doing comparison
if vol_obj.host:
new_host = vol_utils.extract_host(vol_obj.host)
msg = (_("Volume %(vol_id)s is not local to this node "
"%(host)s") % {'vol_id': vol_obj.id,
'host': self.host})
if new_host != self.host:
raise exception.InvalidVolume(reason=msg)
self._notify_about_group_usage(
context, group, "delete.start")
volumes_model_update = None
model_update = None
try:
utils.require_driver_initialized(self.driver)
try:
model_update, volumes_model_update = (
self.driver.delete_group(context, group, volumes))
except NotImplementedError:
model_update, volumes_model_update = (
self._delete_group_generic(context, group, volumes))
if volumes_model_update:
for update in volumes_model_update:
# If we failed to delete a volume, make sure the
# status for the group is set to error as well
if (update['status'] in ['error_deleting', 'error']
and model_update['status'] not in
['error_deleting', 'error']):
model_update['status'] = update['status']
self.db.volumes_update(context, volumes_model_update)
if model_update:
if model_update['status'] in ['error_deleting', 'error']:
msg = (_('Delete group failed.'))
LOG.error(msg,
resource={'type': 'group',
'id': group.id})
raise exception.VolumeDriverException(message=msg)
else:
group.update(model_update)
group.save()
except Exception:
with excutils.save_and_reraise_exception():
group.status = 'error'
group.save()
# Update volume status to 'error' if driver returns
# None for volumes_model_update.
if not volumes_model_update:
for vol_obj in volumes:
vol_obj.status = 'error'
vol_obj.save()
# Get reservations for group
try:
reserve_opts = {'groups': -1}
grpreservations = GROUP_QUOTAS.reserve(context,
project_id=project_id,
**reserve_opts)
except Exception:
grpreservations = None
LOG.exception(_LE("Delete group "
"failed to update usages."),
resource={'type': 'group',
'id': group.id})
for vol in volumes:
# Get reservations for volume
try:
reserve_opts = {'volumes': -1,
'gigabytes': -vol.size}
QUOTAS.add_volume_type_opts(context,
reserve_opts,
vol.volume_type_id)
reservations = QUOTAS.reserve(context,
project_id=project_id,
**reserve_opts)
except Exception:
reservations = None
LOG.exception(_LE("Delete group "
"failed to update usages."),
resource={'type': 'group',
'id': group.id})
# Delete glance metadata if it exists
self.db.volume_glance_metadata_delete_by_volume(context, vol.id)
vol.destroy()
# Commit the reservations
if reservations:
QUOTAS.commit(context, reservations, project_id=project_id)
self.stats['allocated_capacity_gb'] -= vol.size
if grpreservations:
GROUP_QUOTAS.commit(context, grpreservations,
project_id=project_id)
group.destroy()
self._notify_about_group_usage(
context, group, "delete.end")
self.publish_service_capabilities(context)
LOG.info(_LI("Delete group "
"completed successfully."),
resource={'type': 'group',
'id': group.id})
def _create_group_generic(self, context, group):
"""Creates a group."""
# A group entry is already created in db. Just returns a status here.
model_update = {'status': fields.GroupStatus.AVAILABLE,
'created_at': timeutils.utcnow()}
return model_update
def _delete_group_generic(self, context, group, volumes):
"""Deletes a group and volumes in the group."""
model_update = {'status': group.status}
volume_model_updates = []
for volume_ref in volumes:
volume_model_update = {'id': volume_ref.id}
try:
self.driver.remove_export(context, volume_ref)
self.driver.delete_volume(volume_ref)
volume_model_update['status'] = 'deleted'
except exception.VolumeIsBusy:
volume_model_update['status'] = 'available'
except Exception:
volume_model_update['status'] = 'error'
model_update['status'] = fields.GroupStatus.ERROR
volume_model_updates.append(volume_model_update)
return model_update, volume_model_updates
def _update_group_generic(self, context, group,
add_volumes=None, remove_volumes=None):
"""Updates a group."""
# NOTE(xyang): The volume manager adds/removes the volume to/from the
# group in the database. This default implementation does not do
# anything in the backend storage.
return None, None, None
def update_consistencygroup(self, context, group,
add_volumes=None, remove_volumes=None):
"""Updates consistency group.
Update consistency group by adding volumes to the group,
or removing volumes from the group.
"""
add_volumes_ref = []
remove_volumes_ref = []
add_volumes_list = []
remove_volumes_list = []
if add_volumes:
add_volumes_list = add_volumes.split(',')
if remove_volumes:
remove_volumes_list = remove_volumes.split(',')
for add_vol in add_volumes_list:
try:
add_vol_ref = self.db.volume_get(context, add_vol)
except exception.VolumeNotFound:
LOG.error(_LE("Update consistency group "
"failed to add volume-%(volume_id)s: "
"VolumeNotFound."),
{'volume_id': add_vol_ref['id']},
resource={'type': 'consistency_group',
'id': group.id})
raise
if add_vol_ref['status'] not in VALID_ADD_VOL_TO_CG_STATUS:
msg = (_("Cannot add volume %(volume_id)s to consistency "
"group %(group_id)s because volume is in an invalid "
"state: %(status)s. Valid states are: %(valid)s.") %
{'volume_id': add_vol_ref['id'],
'group_id': group.id,
'status': add_vol_ref['status'],
'valid': VALID_ADD_VOL_TO_CG_STATUS})
raise exception.InvalidVolume(reason=msg)
# self.host is 'host@backend'
# volume_ref['host'] is 'host@backend#pool'
# Extract host before doing comparison
new_host = vol_utils.extract_host(add_vol_ref['host'])
if new_host != self.host:
raise exception.InvalidVolume(
reason=_("Volume is not local to this node."))
add_volumes_ref.append(add_vol_ref)
for remove_vol in remove_volumes_list:
try:
remove_vol_ref = self.db.volume_get(context, remove_vol)
except exception.VolumeNotFound:
LOG.error(_LE("Update consistency group "
"failed to remove volume-%(volume_id)s: "
"VolumeNotFound."),
{'volume_id': remove_vol_ref['id']},
resource={'type': 'consistency_group',
'id': group.id})
raise
if remove_vol_ref['status'] not in VALID_REMOVE_VOL_FROM_CG_STATUS:
msg = (_("Cannot remove volume %(volume_id)s from consistency "
"group %(group_id)s because volume is in an invalid "
"state: %(status)s. Valid states are: %(valid)s.") %
{'volume_id': remove_vol_ref['id'],
'group_id': group.id,
'status': remove_vol_ref['status'],
'valid': VALID_REMOVE_VOL_FROM_CG_STATUS})
raise exception.InvalidVolume(reason=msg)
remove_volumes_ref.append(remove_vol_ref)
self._notify_about_consistencygroup_usage(
context, group, "update.start")
try:
utils.require_driver_initialized(self.driver)
model_update, add_volumes_update, remove_volumes_update = (
self.driver.update_consistencygroup(
context, group,
add_volumes=add_volumes_ref,
remove_volumes=remove_volumes_ref))
if add_volumes_update:
for update in add_volumes_update:
self.db.volume_update(context, update['id'], update)
if remove_volumes_update:
for update in remove_volumes_update:
self.db.volume_update(context, update['id'], update)
if model_update:
if model_update['status'] in (
[fields.ConsistencyGroupStatus.ERROR]):
msg = (_('Error occurred when updating consistency group '
'%s.') % group.id)
LOG.error(msg)
raise exception.VolumeDriverException(message=msg)
group.update(model_update)
group.save()
except exception.VolumeDriverException:
with excutils.save_and_reraise_exception():
LOG.error(_LE("Error occurred in the volume driver when "
"updating consistency group %(group_id)s."),
{'group_id': group.id})
group.status = 'error'
group.save()
for add_vol in add_volumes_ref:
self.db.volume_update(context, add_vol['id'],
{'status': 'error'})
for rem_vol in remove_volumes_ref:
self.db.volume_update(context, rem_vol['id'],
{'status': 'error'})
except Exception:
with excutils.save_and_reraise_exception():
LOG.error(_LE("Error occurred when updating consistency "
"group %(group_id)s."),
{'group_id': group.id})
group.status = 'error'
group.save()
for add_vol in add_volumes_ref:
self.db.volume_update(context, add_vol['id'],
{'status': 'error'})
for rem_vol in remove_volumes_ref:
self.db.volume_update(context, rem_vol['id'],
{'status': 'error'})
now = timeutils.utcnow()
group.status = 'available'
group.update_at = now
group.save()
for add_vol in add_volumes_ref:
self.db.volume_update(context, add_vol['id'],
{'consistencygroup_id': group.id,
'updated_at': now})
for rem_vol in remove_volumes_ref:
self.db.volume_update(context, rem_vol['id'],
{'consistencygroup_id': None,
'updated_at': now})
self._notify_about_consistencygroup_usage(
context, group, "update.end")
LOG.info(_LI("Update consistency group "
"completed successfully."),
resource={'type': 'consistency_group',
'id': group.id})
def update_group(self, context, group,
add_volumes=None, remove_volumes=None):
"""Updates group.
Update group by adding volumes to the group,
or removing volumes from the group.
"""
add_volumes_ref = []
remove_volumes_ref = []
add_volumes_list = []
remove_volumes_list = []
if add_volumes:
add_volumes_list = add_volumes.split(',')
if remove_volumes:
remove_volumes_list = remove_volumes.split(',')
for add_vol in add_volumes_list:
try:
add_vol_ref = objects.Volume.get_by_id(context, add_vol)
except exception.VolumeNotFound:
LOG.error(_LE("Update group "
"failed to add volume-%(volume_id)s: "
"VolumeNotFound."),
{'volume_id': add_vol_ref.id},
resource={'type': 'group',
'id': group.id})
raise
if add_vol_ref.status not in VALID_ADD_VOL_TO_GROUP_STATUS:
msg = (_("Cannot add volume %(volume_id)s to "
"group %(group_id)s because volume is in an invalid "
"state: %(status)s. Valid states are: %(valid)s.") %
{'volume_id': add_vol_ref.id,
'group_id': group.id,
'status': add_vol_ref.status,
'valid': VALID_ADD_VOL_TO_GROUP_STATUS})
raise exception.InvalidVolume(reason=msg)
# self.host is 'host@backend'
# volume_ref['host'] is 'host@backend#pool'
# Extract host before doing comparison
new_host = vol_utils.extract_host(add_vol_ref.host)
if new_host != self.host:
raise exception.InvalidVolume(
reason=_("Volume is not local to this node."))
add_volumes_ref.append(add_vol_ref)
for remove_vol in remove_volumes_list:
try:
remove_vol_ref = objects.Volume.get_by_id(context, remove_vol)
except exception.VolumeNotFound:
LOG.error(_LE("Update group "
"failed to remove volume-%(volume_id)s: "
"VolumeNotFound."),
{'volume_id': remove_vol_ref.id},
resource={'type': 'group',
'id': group.id})
raise
if (remove_vol_ref.status not in
VALID_REMOVE_VOL_FROM_GROUP_STATUS):
msg = (_("Cannot remove volume %(volume_id)s from "
"group %(group_id)s because volume is in an invalid "
"state: %(status)s. Valid states are: %(valid)s.") %
{'volume_id': remove_vol_ref.id,
'group_id': group.id,
'status': remove_vol_ref.status,
'valid': VALID_REMOVE_VOL_FROM_GROUP_STATUS})
raise exception.InvalidVolume(reason=msg)
remove_volumes_ref.append(remove_vol_ref)
self._notify_about_group_usage(
context, group, "update.start")
try:
utils.require_driver_initialized(self.driver)
try:
model_update, add_volumes_update, remove_volumes_update = (
self.driver.update_group(
context, group,
add_volumes=add_volumes_ref,
remove_volumes=remove_volumes_ref))
except NotImplementedError:
model_update, add_volumes_update, remove_volumes_update = (
self._update_group_generic(
context, group,
add_volumes=add_volumes_ref,
remove_volumes=remove_volumes_ref))
if add_volumes_update:
self.db.volumes_update(context, add_volumes_update)
if remove_volumes_update:
self.db.volumes_update(context, remove_volumes_update)
if model_update:
if model_update['status'] in (
[fields.GroupStatus.ERROR]):
msg = (_('Error occurred when updating group '
'%s.') % group.id)
LOG.error(msg)
raise exception.VolumeDriverException(message=msg)
group.update(model_update)
group.save()
except exception.VolumeDriverException:
with excutils.save_and_reraise_exception():
LOG.error(_LE("Error occurred in the volume driver when "
"updating group %(group_id)s."),
{'group_id': group.id})
group.status = 'error'
group.save()
for add_vol in add_volumes_ref:
add_vol.status = 'error'
add_vol.save()
for rem_vol in remove_volumes_ref:
rem_vol.status = 'error'
rem_vol.save()
except Exception:
with excutils.save_and_reraise_exception():
LOG.error(_LE("Error occurred when updating "
"group %(group_id)s."),
{'group_id': group.id})
group.status = 'error'
group.save()
for add_vol in add_volumes_ref:
add_vol.status = 'error'
add_vol.save()
for rem_vol in remove_volumes_ref:
rem_vol.status = 'error'
rem_vol.save()
group.status = 'available'
group.save()
for add_vol in add_volumes_ref:
add_vol.group_id = group.id
add_vol.save()
for rem_vol in remove_volumes_ref:
rem_vol.group_id = None
rem_vol.save()
self._notify_about_group_usage(
context, group, "update.end")
LOG.info(_LI("Update group completed successfully."),
resource={'type': 'group',
'id': group.id})
def create_cgsnapshot(self, context, cgsnapshot):
"""Creates the cgsnapshot."""
caller_context = context
context = context.elevated()
LOG.info(_LI("Cgsnapshot %s: creating."), cgsnapshot.id)
snapshots = objects.SnapshotList.get_all_for_cgsnapshot(
context, cgsnapshot.id)
self._notify_about_cgsnapshot_usage(
context, cgsnapshot, "create.start")
snapshots_model_update = None
model_update = None
try:
utils.require_driver_initialized(self.driver)
LOG.debug("Cgsnapshot %(cgsnap_id)s: creating.",
{'cgsnap_id': cgsnapshot.id})
# Pass context so that drivers that want to use it, can,
# but it is not a requirement for all drivers.
cgsnapshot.context = caller_context
for snapshot in snapshots:
snapshot.context = caller_context
model_update, snapshots_model_update = (
self.driver.create_cgsnapshot(context, cgsnapshot,
snapshots))
if snapshots_model_update:
for snap_model in snapshots_model_update:
# Update db for snapshot.
# NOTE(xyang): snapshots is a list of snapshot objects.
# snapshots_model_update should be a list of dicts.
self.db.snapshot_update(context,
snap_model['id'],
snap_model)
if (snap_model['status'] in [
fields.SnapshotStatus.ERROR_DELETING,
fields.SnapshotStatus.ERROR] and
model_update['status'] not in
['error_deleting', 'error']):
model_update['status'] = snap_model['status']
if model_update:
if model_update['status'] == 'error':
msg = (_('Error occurred when creating cgsnapshot '
'%s.') % cgsnapshot.id)
LOG.error(msg)
raise exception.VolumeDriverException(message=msg)
cgsnapshot.update(model_update)
cgsnapshot.save()
except exception.CinderException:
with excutils.save_and_reraise_exception():
cgsnapshot.status = 'error'
cgsnapshot.save()
# Update snapshot status to 'error' if driver returns
# None for snapshots_model_update.
if not snapshots_model_update:
for snapshot in snapshots:
snapshot.status = fields.SnapshotStatus.ERROR
snapshot.save()
for snapshot in snapshots:
volume_id = snapshot['volume_id']
snapshot_id = snapshot['id']
vol_ref = self.db.volume_get(context, volume_id)
if vol_ref.bootable:
try:
self.db.volume_glance_metadata_copy_to_snapshot(
context, snapshot_id, volume_id)
except exception.GlanceMetadataNotFound:
# If volume is not created from image, No glance metadata
# would be available for that volume in
# volume glance metadata table
pass
except exception.CinderException as ex:
LOG.error(_LE("Failed updating %(snapshot_id)s"
" metadata using the provided volumes"
" %(volume_id)s metadata"),
{'volume_id': volume_id,
'snapshot_id': snapshot_id})
# TODO(thangp): Switch over to use snapshot.update()
# after cgsnapshot-objects bugs are fixed
self.db.snapshot_update(
context, snapshot_id, {
'status': fields.SnapshotStatus.ERROR})
raise exception.MetadataCopyFailure(
reason=six.text_type(ex))
self.db.snapshot_update(context,
snapshot['id'],
{'status': fields.SnapshotStatus.AVAILABLE,
'progress': '100%'})
cgsnapshot.status = 'available'
cgsnapshot.save()
LOG.info(_LI("cgsnapshot %s: created successfully"),
cgsnapshot.id)
self._notify_about_cgsnapshot_usage(
context, cgsnapshot, "create.end")
return cgsnapshot
def create_group_snapshot(self, context, group_snapshot):
"""Creates the group_snapshot."""
caller_context = context
context = context.elevated()
LOG.info(_LI("GroupSnapshot %s: creating."), group_snapshot.id)
snapshots = objects.SnapshotList.get_all_for_group_snapshot(
context, group_snapshot.id)
self._notify_about_group_snapshot_usage(
context, group_snapshot, "create.start")
snapshots_model_update = None
model_update = None
try:
utils.require_driver_initialized(self.driver)
LOG.debug("Group snapshot %(grp_snap_id)s: creating.",
{'grp_snap_id': group_snapshot.id})
# Pass context so that drivers that want to use it, can,
# but it is not a requirement for all drivers.
group_snapshot.context = caller_context
for snapshot in snapshots:
snapshot.context = caller_context
try:
model_update, snapshots_model_update = (
self.driver.create_group_snapshot(context, group_snapshot,
snapshots))
except NotImplementedError:
model_update, snapshots_model_update = (
self._create_group_snapshot_generic(
context, group_snapshot, snapshots))
if snapshots_model_update:
for snap_model in snapshots_model_update:
# Update db for snapshot.
# NOTE(xyang): snapshots is a list of snapshot objects.
# snapshots_model_update should be a list of dicts.
snap_id = snap_model.pop('id')
snap_obj = objects.Snapshot.get_by_id(context, snap_id)
snap_obj.update(snap_model)
snap_obj.save()
if (snap_model['status'] in [
fields.SnapshotStatus.ERROR_DELETING,
fields.SnapshotStatus.ERROR] and
model_update['status'] not in
['error_deleting', 'error']):
model_update['status'] = snap_model['status']
if model_update:
if model_update['status'] == 'error':
msg = (_('Error occurred when creating group_snapshot '
'%s.') % group_snapshot.id)
LOG.error(msg)
raise exception.VolumeDriverException(message=msg)
group_snapshot.update(model_update)
group_snapshot.save()
except exception.CinderException:
with excutils.save_and_reraise_exception():
group_snapshot.status = 'error'
group_snapshot.save()
# Update snapshot status to 'error' if driver returns
# None for snapshots_model_update.
if not snapshots_model_update:
for snapshot in snapshots:
snapshot.status = fields.SnapshotStatus.ERROR
snapshot.save()
for snapshot in snapshots:
volume_id = snapshot.volume_id
snapshot_id = snapshot.id
vol_obj = objects.Volume.get_by_id(context, volume_id)
if vol_obj.bootable:
try:
self.db.volume_glance_metadata_copy_to_snapshot(
context, snapshot_id, volume_id)
except exception.GlanceMetadataNotFound:
# If volume is not created from image, No glance metadata
# would be available for that volume in
# volume glance metadata table
pass
except exception.CinderException as ex:
LOG.error(_LE("Failed updating %(snapshot_id)s"
" metadata using the provided volumes"
" %(volume_id)s metadata"),
{'volume_id': volume_id,
'snapshot_id': snapshot_id})
snapshot.status = fields.SnapshotStatus.ERROR
snapshot.save()
raise exception.MetadataCopyFailure(
reason=six.text_type(ex))
snapshot.status = fields.SnapshotStatus.AVAILABLE
snapshot.progress = '100%'
snapshot.save()
group_snapshot.status = 'available'
group_snapshot.save()
LOG.info(_LI("group_snapshot %s: created successfully"),
group_snapshot.id)
self._notify_about_group_snapshot_usage(
context, group_snapshot, "create.end")
return group_snapshot
def _create_group_snapshot_generic(self, context, group_snapshot,
snapshots):
"""Creates a group_snapshot."""
model_update = {'status': 'available'}
snapshot_model_updates = []
for snapshot in snapshots:
snapshot_model_update = {'id': snapshot.id}
try:
self.driver.create_snapshot(snapshot)
snapshot_model_update['status'] = 'available'
except Exception:
snapshot_model_update['status'] = 'error'
model_update['status'] = 'error'
snapshot_model_updates.append(snapshot_model_update)
return model_update, snapshot_model_updates
def _delete_group_snapshot_generic(self, context, group_snapshot,
snapshots):
"""Deletes a group_snapshot."""
model_update = {'status': group_snapshot.status}
snapshot_model_updates = []
for snapshot in snapshots:
snapshot_model_update = {'id': snapshot.id}
try:
self.driver.delete_snapshot(snapshot)
snapshot_model_update['status'] = 'deleted'
except exception.SnapshotIsBusy:
snapshot_model_update['status'] = 'available'
except Exception:
snapshot_model_update['status'] = 'error'
model_update['status'] = 'error'
snapshot_model_updates.append(snapshot_model_update)
return model_update, snapshot_model_updates
def delete_cgsnapshot(self, context, cgsnapshot):
"""Deletes cgsnapshot."""
caller_context = context
context = context.elevated()
project_id = cgsnapshot.project_id
LOG.info(_LI("cgsnapshot %s: deleting"), cgsnapshot.id)
snapshots = objects.SnapshotList.get_all_for_cgsnapshot(
context, cgsnapshot.id)
self._notify_about_cgsnapshot_usage(
context, cgsnapshot, "delete.start")
snapshots_model_update = None
model_update = None
try:
utils.require_driver_initialized(self.driver)
LOG.debug("cgsnapshot %(cgsnap_id)s: deleting",
{'cgsnap_id': cgsnapshot.id})
# Pass context so that drivers that want to use it, can,
# but it is not a requirement for all drivers.
cgsnapshot.context = caller_context
for snapshot in snapshots:
snapshot.context = caller_context
model_update, snapshots_model_update = (
self.driver.delete_cgsnapshot(context, cgsnapshot,
snapshots))
if snapshots_model_update:
for snap_model in snapshots_model_update:
# NOTE(xyang): snapshots is a list of snapshot objects.
# snapshots_model_update should be a list of dicts.
snap = next((item for item in snapshots if
item.id == snap_model['id']), None)
if snap:
snap.status = snap_model['status']
snap.save()
if (snap_model['status'] in
[fields.SnapshotStatus.ERROR_DELETING,
fields.SnapshotStatus.ERROR] and
model_update['status'] not in
['error_deleting', 'error']):
model_update['status'] = snap_model['status']
if model_update:
if model_update['status'] in ['error_deleting', 'error']:
msg = (_('Error occurred when deleting cgsnapshot '
'%s.') % cgsnapshot.id)
LOG.error(msg)
raise exception.VolumeDriverException(message=msg)
else:
cgsnapshot.update(model_update)
cgsnapshot.save()
except exception.CinderException:
with excutils.save_and_reraise_exception():
cgsnapshot.status = 'error'
cgsnapshot.save()
# Update snapshot status to 'error' if driver returns
# None for snapshots_model_update.
if not snapshots_model_update:
for snapshot in snapshots:
snapshot.status = fields.SnapshotStatus.ERROR
snapshot.save()
for snapshot in snapshots:
# Get reservations
try:
if CONF.no_snapshot_gb_quota:
reserve_opts = {'snapshots': -1}
else:
reserve_opts = {
'snapshots': -1,
'gigabytes': -snapshot['volume_size'],
}
volume_ref = self.db.volume_get(context, snapshot['volume_id'])
QUOTAS.add_volume_type_opts(context,
reserve_opts,
volume_ref.get('volume_type_id'))
reservations = QUOTAS.reserve(context,
project_id=project_id,
**reserve_opts)
except Exception:
reservations = None
LOG.exception(_LE("Failed to update usages deleting snapshot"))
self.db.volume_glance_metadata_delete_by_snapshot(context,
snapshot['id'])
# TODO(thangp): Switch over to use snapshot.destroy()
# after cgsnapshot-objects bugs are fixed
self.db.snapshot_destroy(context, snapshot['id'])
# Commit the reservations
if reservations:
QUOTAS.commit(context, reservations, project_id=project_id)
cgsnapshot.destroy()
LOG.info(_LI("cgsnapshot %s: deleted successfully"), cgsnapshot.id)
self._notify_about_cgsnapshot_usage(context, cgsnapshot, "delete.end",
snapshots)
def delete_group_snapshot(self, context, group_snapshot):
"""Deletes group_snapshot."""
caller_context = context
context = context.elevated()
project_id = group_snapshot.project_id
LOG.info(_LI("group_snapshot %s: deleting"), group_snapshot.id)
snapshots = objects.SnapshotList.get_all_for_group_snapshot(
context, group_snapshot.id)
self._notify_about_group_snapshot_usage(
context, group_snapshot, "delete.start")
snapshots_model_update = None
model_update = None
try:
utils.require_driver_initialized(self.driver)
LOG.debug("group_snapshot %(grp_snap_id)s: deleting",
{'grp_snap_id': group_snapshot.id})
# Pass context so that drivers that want to use it, can,
# but it is not a requirement for all drivers.
group_snapshot.context = caller_context
for snapshot in snapshots:
snapshot.context = caller_context
try:
model_update, snapshots_model_update = (
self.driver.delete_group_snapshot(context, group_snapshot,
snapshots))
except NotImplementedError:
model_update, snapshots_model_update = (
self._delete_group_snapshot_generic(
context, group_snapshot, snapshots))
if snapshots_model_update:
for snap_model in snapshots_model_update:
# NOTE(xyang): snapshots is a list of snapshot objects.
# snapshots_model_update should be a list of dicts.
snap = next((item for item in snapshots if
item.id == snap_model['id']), None)
if snap:
snap_model.pop('id')
snap.update(snap_model)
snap.save()
if (snap_model['status'] in
[fields.SnapshotStatus.ERROR_DELETING,
fields.SnapshotStatus.ERROR] and
model_update['status'] not in
['error_deleting', 'error']):
model_update['status'] = snap_model['status']
if model_update:
if model_update['status'] in ['error_deleting', 'error']:
msg = (_('Error occurred when deleting group_snapshot '
'%s.') % group_snapshot.id)
LOG.error(msg)
raise exception.VolumeDriverException(message=msg)
else:
group_snapshot.update(model_update)
group_snapshot.save()
except exception.CinderException:
with excutils.save_and_reraise_exception():
group_snapshot.status = 'error'
group_snapshot.save()
# Update snapshot status to 'error' if driver returns
# None for snapshots_model_update.
if not snapshots_model_update:
for snapshot in snapshots:
snapshot.status = fields.SnapshotStatus.ERROR
snapshot.save()
for snapshot in snapshots:
# Get reservations
try:
if CONF.no_snapshot_gb_quota:
reserve_opts = {'snapshots': -1}
else:
reserve_opts = {
'snapshots': -1,
'gigabytes': -snapshot.volume_size,
}
volume_ref = objects.Volume.get_by_id(context,
snapshot.volume_id)
QUOTAS.add_volume_type_opts(context,
reserve_opts,
volume_ref.volume_type_id)
reservations = QUOTAS.reserve(context,
project_id=project_id,
**reserve_opts)
except Exception:
reservations = None
LOG.exception(_LE("Failed to update usages deleting snapshot"))
self.db.volume_glance_metadata_delete_by_snapshot(context,
snapshot.id)
snapshot.destroy()
# Commit the reservations
if reservations:
QUOTAS.commit(context, reservations, project_id=project_id)
group_snapshot.destroy()
LOG.info(_LI("group_snapshot %s: deleted successfully"),
group_snapshot.id)
self._notify_about_group_snapshot_usage(context, group_snapshot,
"delete.end",
snapshots)
def update_migrated_volume(self, ctxt, volume, new_volume, volume_status):
"""Finalize migration process on backend device."""
model_update = None
model_update_default = {'_name_id': new_volume.name_id,
'provider_location':
new_volume.provider_location}
try:
model_update = self.driver.update_migrated_volume(ctxt,
volume,
new_volume,
volume_status)
except NotImplementedError:
# If update_migrated_volume is not implemented for the driver,
# _name_id and provider_location will be set with the values
# from new_volume.
model_update = model_update_default
if model_update:
model_update_default.update(model_update)
# Swap keys that were changed in the source so we keep their values
# in the temporary volume's DB record.
# Need to convert 'metadata' and 'admin_metadata' since
# they are not keys of volume, their corresponding keys are
# 'volume_metadata' and 'volume_admin_metadata'.
model_update_new = dict()
for key in model_update:
if key == 'metadata':
if volume.get('volume_metadata'):
model_update_new[key] = {
metadata['key']: metadata['value']
for metadata in volume.volume_metadata}
elif key == 'admin_metadata':
model_update_new[key] = {
metadata['key']: metadata['value']
for metadata in volume.volume_admin_metadata}
else:
model_update_new[key] = volume[key]
with new_volume.obj_as_admin():
new_volume.update(model_update_new)
new_volume.save()
with volume.obj_as_admin():
volume.update(model_update_default)
volume.save()
# Replication V2.1 methods
def failover_host(self, context,
secondary_backend_id=None):
"""Failover a backend to a secondary replication target.
Instructs a replication capable/configured backend to failover
to one of it's secondary replication targets. host=None is
an acceptable input, and leaves it to the driver to failover
to the only configured target, or to choose a target on it's
own. All of the hosts volumes will be passed on to the driver
in order for it to determine the replicated volumes on the host,
if needed.
:param context: security context
:param secondary_backend_id: Specifies backend_id to fail over to
"""
svc_host = vol_utils.extract_host(self.host, 'backend')
service = objects.Service.get_by_args(
context,
svc_host,
constants.VOLUME_BINARY)
volumes = objects.VolumeList.get_all_by_host(context, self.host)
exception_encountered = False
try:
# expected form of volume_update_list:
# [{volume_id: <cinder-volid>, updates: {'provider_id': xxxx....}},
# {volume_id: <cinder-volid>, updates: {'provider_id': xxxx....}}]
(active_backend_id, volume_update_list) = (
self.driver.failover_host(
context,
volumes,
secondary_id=secondary_backend_id))
except exception.UnableToFailOver:
LOG.exception(_LE("Failed to perform replication failover"))
service.replication_status = (
fields.ReplicationStatus.FAILOVER_ERROR)
service.save()
exception_encountered = True
except exception.InvalidReplicationTarget:
LOG.exception(_LE("Invalid replication target specified "
"for failover"))
# Preserve the replication_status
if secondary_backend_id == "default":
service.replication_status = (
fields.ReplicationStatus.FAILED_OVER)
else:
service.replication_status = fields.ReplicationStatus.ENABLED
service.save()
exception_encountered = True
except exception.VolumeDriverException:
# NOTE(jdg): Drivers need to be aware if they fail during
# a failover sequence, we're expecting them to cleanup
# and make sure the driver state is such that the original
# backend is still set as primary as per driver memory
LOG.error(_LE("Driver reported error during "
"replication failover."))
service.status = 'error'
service.save()
exception_encountered = True
if exception_encountered:
LOG.error(
_LE("Error encountered during failover on host: "
"%(host)s invalid target ID %(backend_id)s"),
{'host': self.host, 'backend_id':
secondary_backend_id})
return
if secondary_backend_id == "default":
service.replication_status = fields.ReplicationStatus.ENABLED
service.active_backend_id = ""
if service.frozen:
service.disabled = True
service.disabled_reason = "frozen"
else:
service.disabled = False
service.disabled_reason = ""
service.save()
else:
service.replication_status = fields.ReplicationStatus.FAILED_OVER
service.active_backend_id = active_backend_id
service.disabled = True
service.disabled_reason = "failed-over"
service.save()
for update in volume_update_list:
# Response must include an id key: {volume_id: <cinder-uuid>}
if not update.get('volume_id'):
raise exception.UnableToFailOver(
reason=_("Update list, doesn't include volume_id"))
# Key things to consider (attaching failed-over volumes):
# provider_location
# provider_auth
# provider_id
# replication_status
vobj = objects.Volume.get_by_id(context, update['volume_id'])
vobj.update(update.get('updates', {}))
vobj.save()
LOG.info(_LI("Failed over to replication target successfully."))
def freeze_host(self, context):
"""Freeze management plane on this backend.
Basically puts the control/management plane into a
Read Only state. We should handle this in the scheduler,
however this is provided to let the driver know in case it
needs/wants to do something specific on the backend.
:param context: security context
"""
# TODO(jdg): Return from driver? or catch?
# Update status column in service entry
try:
self.driver.freeze_backend(context)
except exception.VolumeDriverException:
# NOTE(jdg): In the case of freeze, we don't really
# need the backend's consent or anything, we'll just
# disable the service, so we can just log this and
# go about our business
LOG.warning(_LW('Error encountered on Cinder backend during '
'freeze operation, service is frozen, however '
'notification to driver has failed.'))
svc_host = vol_utils.extract_host(self.host, 'backend')
service = objects.Service.get_by_args(
context,
svc_host,
constants.VOLUME_BINARY)
service.disabled = True
service.disabled_reason = "frozen"
service.save()
LOG.info(_LI("Set backend status to frozen successfully."))
return True
def thaw_host(self, context):
"""UnFreeze management plane on this backend.
Basically puts the control/management plane back into
a normal state. We should handle this in the scheduler,
however this is provided to let the driver know in case it
needs/wants to do something specific on the backend.
:param context: security context
"""
# TODO(jdg): Return from driver? or catch?
# Update status column in service entry
try:
self.driver.thaw_backend(context)
except exception.VolumeDriverException:
# NOTE(jdg): Thaw actually matters, if this call
# to the backend fails, we're stuck and can't re-enable
LOG.error(_LE('Error encountered on Cinder backend during '
'thaw operation, service will remain frozen.'))
return False
svc_host = vol_utils.extract_host(self.host, 'backend')
service = objects.Service.get_by_args(
context,
svc_host,
constants.VOLUME_BINARY)
service.disabled = False
service.disabled_reason = ""
service.save()
LOG.info(_LI("Thawed backend successfully."))
return True
def manage_existing_snapshot(self, ctxt, snapshot, ref=None):
LOG.debug('manage_existing_snapshot: managing %s.', ref)
try:
flow_engine = manage_existing_snapshot.get_flow(
ctxt,
self.db,
self.driver,
self.host,
snapshot.id,
ref)
except Exception:
msg = _LE("Failed to create manage_existing flow: "
"%(object_type)s %(object_id)s.")
LOG.exception(msg, {'object_type': 'snapshot',
'object_id': snapshot.id})
raise exception.CinderException(
_("Failed to create manage existing flow."))
with flow_utils.DynamicLogListener(flow_engine, logger=LOG):
flow_engine.run()
return snapshot.id
def get_manageable_snapshots(self, ctxt, marker, limit, offset,
sort_keys, sort_dirs):
try:
utils.require_driver_initialized(self.driver)
except exception.DriverNotInitialized:
with excutils.save_and_reraise_exception():
LOG.exception(_LE("Listing manageable snapshots failed, due "
"to uninitialized driver."))
cinder_snapshots = self.db.snapshot_get_by_host(ctxt, self.host)
try:
driver_entries = self.driver.get_manageable_snapshots(
cinder_snapshots, marker, limit, offset, sort_keys, sort_dirs)
except Exception:
with excutils.save_and_reraise_exception():
LOG.exception(_LE("Listing manageable snapshots failed, due "
"to driver error."))
return driver_entries
def get_capabilities(self, context, discover):
"""Get capabilities of backend storage."""
if discover:
self.driver.init_capabilities()
capabilities = self.driver.capabilities
LOG.debug("Obtained capabilities list: %s.", capabilities)
return capabilities
def get_backup_device(self, ctxt, backup):
(backup_device, is_snapshot) = (
self.driver.get_backup_device(ctxt, backup))
secure_enabled = self.driver.secure_file_operations_enabled()
backup_device_dict = {'backup_device': backup_device,
'secure_enabled': secure_enabled,
'is_snapshot': is_snapshot, }
return backup_device_dict
def secure_file_operations_enabled(self, ctxt, volume):
secure_enabled = self.driver.secure_file_operations_enabled()
return secure_enabled
# TODO(dulek): This goes away immediately in Ocata and is just present in
# Newton so that we can receive v2.x and v3.0 messages.
class _VolumeV3Proxy(object):
target = messaging.Target(version='3.0')
def __init__(self, manager):
self.manager = manager
def create_volume(self, context, volume, request_spec=None,
filter_properties=None, allow_reschedule=True):
# NOTE(dulek): We're replacing volume_id with volume object (by
# switching it from optional keyword argument to positional argument).
return self.manager.create_volume(
context, volume.id, request_spec=request_spec,
filter_properties=filter_properties,
allow_reschedule=allow_reschedule, volume=volume)
def delete_volume(self, context, volume, unmanage_only=False,
cascade=False):
return self.manager.delete_volume(
context, volume.id, unmanage_only=unmanage_only, volume=volume,
cascade=cascade)
def create_snapshot(self, context, snapshot):
return self.manager.create_snapshot(context, snapshot.volume_id,
snapshot)
def delete_snapshot(self, context, snapshot, unmanage_only=False):
return self.manager.delete_snapshot(
context, snapshot, unmanage_only=unmanage_only)
def attach_volume(self, context, volume_id, instance_uuid, host_name,
mountpoint, mode):
return self.manager.attach_volume(
context, volume_id, instance_uuid, host_name, mountpoint, mode)
def detach_volume(self, context, volume_id, attachment_id=None):
return self.manager.detach_volume(context, volume_id,
attachment_id=attachment_id)
def copy_volume_to_image(self, context, volume_id, image_meta):
return self.manager.copy_volume_to_image(context, volume_id,
image_meta)
def initialize_connection(self, context, volume, connector):
# NOTE(dulek): We're replacing volume_id with volume object (by
# switching it from optional keyword argument to positional argument).
return self.manager.initialize_connection(context, volume.id,
connector, volume=volume)
def terminate_connection(self, context, volume_id, connector, force=False):
return self.manager.terminate_connection(context, volume_id, connector,
force=force)
def remove_export(self, context, volume_id):
return self.manager.remove_export(context, volume_id)
def accept_transfer(self, context, volume_id, new_user, new_project):
return self.manager.accept_transfer(context, volume_id, new_user,
new_project)
def migrate_volume_completion(self, ctxt, volume, new_volume, error=False):
# NOTE(dulek): We're replacing volume_id with volume object, same with
# new_volume_id (by switching them from optional keyword arguments to
# positional arguments).
return self.manager.migrate_volume_completion(
ctxt, volume.id, new_volume.id, error=error, volume=volume,
new_volume=new_volume)
def migrate_volume(self, ctxt, volume, host, force_host_copy=False,
new_type_id=None):
# NOTE(dulek): We're replacing volume_id with volume object (by
# switching it from optional keyword argument to positional argument).
return self.manager.migrate_volume(
ctxt, volume.id, host, force_host_copy=force_host_copy,
new_type_id=new_type_id, volume=volume)
def publish_service_capabilities(self, context):
return self.manager.publish_service_capabilities(context)
def extend_volume(self, context, volume, new_size, reservations):
# NOTE(dulek): We're replacing volume_id with volume object (by
# switching it from optional keyword argument to positional argument).
return self.manager.extend_volume(
context, volume.id, new_size, reservations, volume=volume)
def retype(self, context, volume, new_type_id, host,
migration_policy='never', reservations=None,
old_reservations=None):
return self.manager.retype(
context, volume.id, new_type_id, host,
migration_policy=migration_policy, reservations=reservations,
volume=volume, old_reservations=old_reservations)
def manage_existing(self, ctxt, volume, ref=None):
return self.manager.manage_existing(ctxt, volume.id, ref=ref,
volume=volume)
def get_manageable_volumes(self, ctxt, marker, limit, offset, sort_keys,
sort_dirs):
return self.manager.get_manageable_volumes(ctxt, marker, limit, offset,
sort_keys, sort_dirs)
def promote_replica(self, ctxt, volume_id):
return self.manager.promote_replica(ctxt, volume_id)
def reenable_replication(self, ctxt, volume_id):
return self.manager.reenable_replication(ctxt, volume_id)
def create_consistencygroup(self, context, group):
return self.manager.create_consistencygroup(context, group)
def create_group(self, context, group):
return self.manager.create_group(context, group)
def create_consistencygroup_from_src(self, context, group, cgsnapshot=None,
source_cg=None):
return self.manager.create_consistencygroup_from_src(
context, group, cgsnapshot=cgsnapshot, source_cg=source_cg)
def create_group_from_src(self, context, group, group_snapshot=None,
source_group=None):
return self.manager.create_group_from_src(
context, group, group_snapshot=group_snapshot,
source_group=source_group)
def delete_consistencygroup(self, context, group):
return self.manager.delete_consistencygroup(context, group)
def delete_group(self, context, group):
return self.manager.delete_group(context, group)
def update_consistencygroup(self, context, group, add_volumes=None,
remove_volumes=None):
return self.manager.update_consistencygroup(
context, group, add_volumes=add_volumes,
remove_volumes=remove_volumes)
def update_group(self, context, group, add_volumes=None,
remove_volumes=None):
return self.manager.update_group(
context, group, add_volumes=add_volumes,
remove_volumes=remove_volumes)
def create_cgsnapshot(self, context, cgsnapshot):
return self.manager.create_cgsnapshot(context, cgsnapshot)
def create_group_snapshot(self, context, group_snapshot):
return self.manager.create_group_snapshot(context, group_snapshot)
def delete_cgsnapshot(self, context, cgsnapshot):
return self.manager.delete_cgsnapshot(context, cgsnapshot)
def delete_group_snapshot(self, context, group_snapshot):
return self.manager.delete_group_snapshot(context, group_snapshot)
def update_migrated_volume(self, ctxt, volume, new_volume, volume_status):
return self.manager.update_migrated_volume(ctxt, volume, new_volume,
volume_status)
def failover_host(self, context, secondary_backend_id=None):
return self.manager.failover_host(
context, secondary_backend_id=secondary_backend_id)
def freeze_host(self, context):
return self.manager.freeze_host(context)
def thaw_host(self, context):
return self.manager.thaw_host(context)
def manage_existing_snapshot(self, ctxt, snapshot, ref=None):
return self.manager.manage_existing_snapshot(ctxt, snapshot, ref=ref)
def get_manageable_snapshots(self, ctxt, marker, limit, offset, sort_keys,
sort_dirs):
return self.manager.get_manageable_snapshots(
self, ctxt, marker, limit, offset, sort_keys, sort_dirs)
def get_capabilities(self, context, discover):
return self.manager.get_capabilities(context, discover)
def get_backup_device(self, ctxt, backup):
return self.manager.get_backup_device(ctxt, backup)
def secure_file_operations_enabled(self, ctxt, volume):
return self.manager.secure_file_operations_enabled(ctxt, volume)
View Git Blame Copy Permalink