deb-heat/bin/heat-db-setup
Anderson Mesquita 6a1ff532f9 Fix invalid syntax on heat-db-setup
">=" comparison is only supported in certain shells.  This patch changes
it to "-ge" to fix this.

Change-Id: I2bf1294c31d38e18b02bebd190bd4bfa45beedc5
Closes-Bug: #1398535
2014-12-02 15:31:04 -05:00

300 lines
6.9 KiB
Bash
Executable File

#!/bin/bash
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#
#
# Print --help output and exit.
#
usage() {
cat << EOF
Set up a local MySQL database for use with heat.
This script will create a 'heat' database that is accessible
only on localhost by user 'heat' with password 'heat'.
Usage: heat-db-setup <rpm|deb> [options]
Options:
select a distro type (rpm or debian)
--help | -h
Print usage information.
--password <pw> | -p <pw>
Specify the password for the 'heat' MySQL user that will
use to connect to the 'heat' MySQL database. By default,
the password 'heat' will be used.
--rootpw <pw> | -r <pw>
Specify the root MySQL password. If the script installs
the MySQL server, it will set the root password to this value
instead of prompting for a password. If the MySQL server is
already installed, this password will be used to connect to the
database instead of having to prompt for it.
--yes | -y
In cases where the script would normally ask for confirmation
before doing something, such as installing mysql-server,
just assume yes. This is useful if you want to run the script
non-interactively.
EOF
exit 0
}
install_mysql_server() {
if [ -z "${ASSUME_YES}" ] ; then
$PACKAGE_INSTALL $DB_SERVER
else
$PACKAGE_INSTALL -y $DB_SERVER
fi
}
start_mysql_server() {
$SERVICE_START
}
MYSQL_HEAT_PW_DEFAULT="heat"
MYSQL_HEAT_PW=${MYSQL_HEAT_PW_DEFAULT}
HEAT_CONFIG="/etc/heat/heat.conf"
ASSUME_YES=""
ELEVATE=""
# Check for root privileges
if [[ $EUID -ne 0 ]] ; then
echo "This operation requires superuser privileges, using sudo:"
if sudo -l > /dev/null ; then
ELEVATE="sudo"
else
exit 1
fi
fi
case "$1" in
rpm)
echo "Installing on an RPM system."
PACKAGE_INSTALL="$ELEVATE yum install"
PACKAGE_STATUS="rpm -q"
SERVICE_MYSQLD="mysqld"
DB_SERVER="mysql-server"
# Install mariadb-server in rhel7 and fedora
if [[ -r /etc/redhat-release ]];then
ver=`grep -E -o '[0-9]+([.]?[0-9])*' /etc/redhat-release`
if [[ $ver -ge 7 ]];then
SERVICE_MYSQLD="mariadb"
DB_SERVER="mariadb-server"
fi
fi
SERVICE_START="$ELEVATE service $SERVICE_MYSQLD start"
SERVICE_STATUS="service $SERVICE_MYSQLD status"
SERVICE_ENABLE="$ELEVATE chkconfig"
;;
deb)
echo "Installing on a Debian system."
PACKAGE_INSTALL="$ELEVATE apt-get install"
PACKAGE_STATUS="dpkg-query -s"
SERVICE_MYSQLD="mysql"
DB_SERVER="mysql-server"
SERVICE_START="$ELEVATE service $SERVICE_MYSQLD start"
SERVICE_STATUS="$ELEVATE service $SERVICE_MYSQLD status"
SERVICE_ENABLE=""
;;
*)
usage
;;
esac
while [ $# -gt 0 ]
do
case "$1" in
-h|--help)
usage
;;
-p|--password)
shift
MYSQL_HEAT_PW=${1}
;;
-r|--rootpw)
shift
MYSQL_ROOT_PW=${1}
;;
-y|--yes)
ASSUME_YES="yes"
;;
*)
# ignore
;;
esac
shift
done
# Make sure MySQL is installed.
NEW_MYSQL_INSTALL=0
if ! $PACKAGE_STATUS mysql-server && ! $PACKAGE_STATUS mariadb-server > /dev/null
then
if [ -z "${ASSUME_YES}" ] ; then
printf "mysql-server is not installed. Would you like to install it now? (y/n): "
read response
case "$response" in
y|Y)
;;
n|N)
echo "mysql-server must be installed. Please install it before proceeding."
exit 0
;;
*)
echo "Invalid response."
exit 1
esac
fi
NEW_MYSQL_INSTALL=1
install_mysql_server
fi
# Make sure mysqld is running.
if ! $SERVICE_STATUS > /dev/null
then
if [ -z "${ASSUME_YES}" ] ; then
printf "$SERVICE_MYSQLD is not running. Would you like to start it now? (y/n): "
read response
case "$response" in
y|Y)
;;
n|N)
echo "$SERVICE_MYSQLD must be running. Please start it before proceeding."
exit 0
;;
*)
echo "Invalid response."
exit 1
esac
fi
start_mysql_server
# If we both installed and started, ensure it starts at boot
[ $NEW_MYSQL_INSTALL -eq 1 ] && $SERVICE_ENABLE $SERVICE_MYSQLD on
fi
# Get MySQL root access.
if [ $NEW_MYSQL_INSTALL -eq 1 ]
then
if [ ! "${MYSQL_ROOT_PW+defined}" ] ; then
echo "Since this is a fresh installation of MySQL, please set a password for the 'root' mysql user."
PW_MATCH=0
while [ $PW_MATCH -eq 0 ]
do
printf "Enter new password for 'root' mysql user: "
read -s MYSQL_ROOT_PW
echo
printf "Enter new password again: "
read -s PW2
echo
if [ "${MYSQL_ROOT_PW}" = "${PW2}" ] ; then
PW_MATCH=1
else
echo "Passwords did not match."
fi
done
fi
echo "UPDATE mysql.user SET password = password('${MYSQL_ROOT_PW}') WHERE user = 'root'; DELETE FROM mysql.user WHERE user = ''; flush privileges;" | mysql -u root
if ! [ $? -eq 0 ] ; then
echo "Failed to set password for 'root' MySQL user."
exit 1
fi
elif [ ! "${MYSQL_ROOT_PW+defined}" ] ; then
printf "Please enter the password for the 'root' MySQL user: "
read -s MYSQL_ROOT_PW
echo
fi
# Sanity check MySQL credentials.
MYSQL_ROOT_PW_ARG=""
if [ "${MYSQL_ROOT_PW+defined}" ]
then
MYSQL_ROOT_PW_ARG="--password=${MYSQL_ROOT_PW}"
fi
echo "SELECT 1;" | mysql -u root ${MYSQL_ROOT_PW_ARG} > /dev/null
if ! [ $? -eq 0 ]
then
echo "Failed to connect to the MySQL server. Please check your root user credentials."
exit 1
fi
echo "Verified connectivity to MySQL."
# Now create the db.
echo "Creating 'heat' database."
cat << EOF | mysql -u root ${MYSQL_ROOT_PW_ARG}
CREATE DATABASE IF NOT EXISTS heat DEFAULT CHARACTER SET utf8;
GRANT ALL ON heat.* TO 'heat'@'localhost' IDENTIFIED BY '${MYSQL_HEAT_PW}';
GRANT ALL ON heat.* TO 'heat'@'%' IDENTIFIED BY '${MYSQL_HEAT_PW}';
flush privileges;
EOF
# Make sure heat configuration has the right MySQL password.
if [ "${MYSQL_HEAT_PW}" != "${MYSQL_HEAT_PW_DEFAULT}" ] ; then
echo "Updating 'heat' database password in ${HEAT_CONFIG}"
sed -i -e "s/mysql:\/\/heat:\(.*\)@/mysql:\/\/heat:${MYSQL_HEAT_PW}@/" ${HEAT_CONFIG}
fi
# override the logging config in heat.conf
log_conf=$(mktemp /tmp/heat-logging.XXXXXXXXXX.conf)
cat <<EOF > $log_conf
[loggers]
keys=root
[handlers]
keys=consoleHandler
[formatters]
keys=simpleFormatter
[logger_root]
level=INFO
handlers=consoleHandler
[handler_consoleHandler]
class=StreamHandler
formatter=simpleFormatter
args=(sys.stdout,)
[formatter_simpleFormatter]
format=%(name)s - %(levelname)s - %(message)s
EOF
heat-manage --log-config=$log_conf db_sync
rm $log_conf
# Do a final sanity check on the database.
echo "SELECT * FROM migrate_version;" | mysql -u heat --password=${MYSQL_HEAT_PW} heat > /dev/null
if ! [ $? -eq 0 ]
then
echo "Final sanity check failed."
exit 1
fi
echo "Complete!"