;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;  Copyright(c) 2011-2015 Intel Corporation All rights reserved.
;
;  Redistribution and use in source and binary forms, with or without
;  modification, are permitted provided that the following conditions
;  are met:
;    * Redistributions of source code must retain the above copyright
;      notice, this list of conditions and the following disclaimer.
;    * Redistributions in binary form must reproduce the above copyright
;      notice, this list of conditions and the following disclaimer in
;      the documentation and/or other materials provided with the
;      distribution.
;    * Neither the name of Intel Corporation nor the names of its
;      contributors may be used to endorse or promote products derived
;      from this software without specific prior written permission.
;
;  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
;  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
;  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
;  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
;  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
;  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
;  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
;  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
;  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
;  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;; Optimized pq of N source vectors using SSE3
;;; int pq_gen_sse(int vects, int len, void **array)

;;; Generates P+Q parity vector from N (vects-2) sources in array of pointers
;;; (**array).  Last two pointers are the P and Q destinations respectively.
;;; Vectors must be aligned to 16 bytes.  Length must be 16 byte aligned.

%include "reg_sizes.asm"

%ifidn __OUTPUT_FORMAT__, elf64
 %define arg0  rdi
 %define arg1  rsi
 %define arg2  rdx
 %define arg3  rcx
 %define arg4  r8
 %define arg5  r9
 %define tmp   r11
 %define return rax
 %define PS 8
 %define func(x) x:
 %define FUNC_SAVE
 %define FUNC_RESTORE

%elifidn __OUTPUT_FORMAT__, win64
 %define arg0  rcx
 %define arg1  rdx
 %define arg2  r8
 %define arg3  r9
 %define return rax
 %define PS 8
 %define tmp   r11
 %define stack_size  2*16 + 8 	; must be an odd multiple of 8
 %define func(x) proc_frame x

 %macro FUNC_SAVE 0
	alloc_stack	stack_size
	save_xmm128	xmm6, 0*16
	save_xmm128	xmm7, 1*16
	end_prolog
 %endmacro
 %macro FUNC_RESTORE 0
	movdqa	xmm6, [rsp + 0*16]
	movdqa	xmm7, [rsp + 1*16]
	add	rsp, stack_size
 %endmacro


%elifidn __OUTPUT_FORMAT__, elf32
 %define arg0   edx
 %define arg1   ecx
 %define return eax
 %define PS 4
 %define func(x) x:
 %define arg(x) [ebp+8+PS*x]
 %define arg2  edi	; must sav/restore
 %define arg3  esi
 %define tmp   ebx

 %macro FUNC_SAVE 0
	push	ebp
	mov	ebp, esp
	push	esi
	push	edi
	push	ebx
	mov	arg0, arg(0)
	mov	arg1, arg(1)
	mov	arg2, arg(2)
 %endmacro

 %macro FUNC_RESTORE 0
	pop	ebx
	pop	edi
	pop	esi
	mov	esp, ebp	;if has frame pointer?
	pop	ebp
 %endmacro

%endif	; output formats

%define vec arg0
%define	len arg1
%define ptr arg3
%define pos return

%define xp1   xmm0
%define xq1   xmm1
%define xtmp1 xmm2
%define xs1   xmm3

%define xp2   xmm4
%define xq2   xmm5
%define xtmp2 xmm6
%define xs2   xmm7

%ifidn PS,8			; 64-bit code
 default rel
 [bits 64]
 %define xpoly xmm15
%elifidn PS,4			; 32-bit code
 %define xpoly [poly]
%endif

;;; Use Non-temporal load/stor
%ifdef NO_NT_LDST
 %define XLDR movdqa
 %define XSTR movdqa
%else
 %define XLDR movntdqa
 %define XSTR movntdq
%endif

section .text

align 16
global pq_check_sse:function
func(pq_check_sse)
	FUNC_SAVE
	sub	vec, 3			;Keep as offset to last source
	jng	return_fail		;Must have at least 2 sources
	cmp	len, 0
	je	return_pass
	test	len, (16-1)		;Check alignment of length
	jnz	return_fail
	mov	pos, 0
%ifidn PS,8
	movdqa	xpoly, [poly]		;For 64-bit, load poly into high xmm reg
%endif
	cmp	len, 32
	jl	loop16

len_aligned_32bytes:
	sub	len, 32			;Do end of vec first and run backward

loop32:
	mov 	ptr, [arg2+PS+vec*PS] 	;Get address of P parity vector
	mov	tmp, [arg2+(2*PS)+vec*PS]	;Get address of Q parity vector
	XLDR	xp1, [ptr+pos]		;Initialize xp1 with P1 src
	XLDR	xp2, [ptr+pos+16]	;Initialize xp2 with P2 src + 16B ahead
	pxor	xq1, xq1		;q1 = 0
	pxor	xq2, xq2		;q2 = 0

	mov 	ptr, [arg2+vec*PS] 	;Fetch last source pointer
	mov	tmp, vec		;Set tmp to point back to last vector
	XLDR	xs1, [ptr+pos]		;Preload last vector (source)
	XLDR	xs2, [ptr+pos+16]	;Preload last vector (source)

next_vect:
	sub	tmp, 1		  	;Inner loop for each source vector
	mov 	ptr, [arg2+tmp*PS] 	; get pointer to next vect
	pxor	xp1, xs1		; p1 ^= s1
	pxor	xp2, xs2		; p2 ^= s2
	pxor	xq1, xs1		; q1 ^= s1
	pxor	xq2, xs2		; q2 ^= s2
	pxor	xtmp1, xtmp1		; xtmp1 = 0 - for compare to 0
	pxor	xtmp2, xtmp2		; xtmp2 = 0
	pcmpgtb	xtmp1, xq1		; xtmp1 = mask 0xff or 0x00 if bit7 set
	pcmpgtb	xtmp2, xq2		; xtmp2 = mask 0xff or 0x00 if bit7 set
	pand	xtmp1, xpoly		; xtmp1 = poly or 0x00
	pand	xtmp2, xpoly		; xtmp2 = poly or 0x00
	XLDR	xs1, [ptr+pos]		; Get next vector (source data1)
	XLDR	xs2, [ptr+pos+16]	; Get next vector (source data2)
	paddb	xq1, xq1		; q1 = q1<<1
	paddb	xq2, xq2		; q2 = q2<<1
	pxor	xq1, xtmp1		; q1 = q1<<1 ^ poly_masked
	pxor	xq2, xtmp2		; q2 = q2<<1 ^ poly_masked
	jg	next_vect		; Loop for each vect except 0

	pxor	xp1, xs1		;p1 ^= s1[0] - last source is already loaded
	pxor	xq1, xs1		;q1 ^= 1 * s1[0]
	pxor	xp2, xs2		;p2 ^= s2[0]
	pxor	xq2, xs2		;q2 ^= 1 * s2[0]

	mov	tmp, [arg2+(2*PS)+vec*PS] ;Get address of Q parity vector
	XLDR	xtmp1, [tmp+pos]	;re-init xq1 with Q1 src
	XLDR	xtmp2, [tmp+pos+16]	;re-init xq2 with Q2 src + 16B ahead

	pxor	xq1, xtmp1		;xq1 = q1 calculated ^ q1 saved
	pxor	xq2, xtmp2

	por	xp1, xq1		;Confirm that all P&Q parity are 0
	por	xp1, xp2
	por	xp1, xq2
	ptest	xp1, xp1
	jnz	return_fail
	add	pos, 32
	cmp	pos, len
	jle	loop32


	;; ------------------------------
	;; Do last 16 Bytes remaining
	add	len, 32
	cmp	pos, len
	je	return_pass

loop16:
	mov	ptr, [arg2+PS+vec*PS]	;Get address of P parity vector
	mov	tmp, [arg2+(2*PS)+vec*PS] ;Get address of Q parity vector
	XLDR	xp1, [ptr+pos]		;Initialize xp1 with P1 src
	pxor	xq1, xq1		;q = 0
	mov 	ptr, [arg2+vec*PS] 	;Fetch last source pointer
	mov	tmp, vec		;Set tmp to point back to last vector
	XLDR	xs1, [ptr+pos]		;Preload last vector (source)

next_vect16:
	sub	tmp, 1		  	;Inner loop for each source vector
	mov 	ptr, [arg2+tmp*PS] 	; get pointer to next vect
	pxor	xq1, xs1		; q ^= s
	pxor	xtmp1, xtmp1		; xtmp = 0
	pcmpgtb	xtmp1, xq1		; xtmp = mask 0xff or 0x00 if bit7 set
	pand	xtmp1, xpoly		; xtmp = poly or 0x00
	pxor	xp1, xs1		; p ^= s
	paddb	xq1, xq1		; q = q<<1
	pxor	xq1, xtmp1		; q = q<<1 ^ poly_masked
	XLDR	xs1, [ptr+pos]		; Get next vector (source data)
	jg	next_vect16		; Loop for each vect except 0

	pxor	xp1, xs1		;p ^= s[0] - last source is already loaded
	pxor	xq1, xs1		;q ^= 1 * s[0]

	mov	tmp, [arg2+(2*PS)+vec*PS] ;Get address of Q parity vector
	XLDR	xtmp1, [tmp+pos]	;re-init tmp with Q1 src
	pxor	xq1, xtmp1		;xq1 = q1 calculated ^ q1 saved

	por	xp1, xq1		;Confirm that all P&Q parity are = 0
	ptest	xp1, xp1
	jnz	return_fail
	add	pos, 16
	cmp	pos, len
	jl	loop16


return_pass:
	mov	return, 0
	FUNC_RESTORE
	ret


return_fail:
	mov	return, 1
	FUNC_RESTORE
	ret

endproc_frame

section .data

align 16
poly:
dq 0x1d1d1d1d1d1d1d1d, 0x1d1d1d1d1d1d1d1d

;;;       func          core, ver, snum
slversion pq_check_sse, 00,   06,  0033