deb-libisal/igzip/igzip_inflate_perf.c
Hailiang Wang 52f644d3ff igzip:use fgetpos() to replace ftell() to get file's length.
Change-Id: Ia1f3c06e92c01da9d22b3d70b2b05fe4808c9f2c
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
2017-06-21 05:22:07 -04:00

232 lines
6.5 KiB
C

/**********************************************************************
Copyright(c) 2011-2016 Intel Corporation All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
* Neither the name of Intel Corporation nor the names of its
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**********************************************************************/
#define _FILE_OFFSET_BITS 64
#include <stdio.h>
#include <assert.h>
#include "huff_codes.h"
#include "igzip_lib.h"
#include "test.h"
#if defined(ZLIB_9) || defined(ZLIB_1) || defined(ZLIB_COMPARE)
# include <zlib.h>
#endif
#define BUF_SIZE 1024
#define MIN_TEST_LOOPS 8
#ifndef RUN_MEM_SIZE
# define RUN_MEM_SIZE 1000000000
#endif
int main(int argc, char *argv[])
{
FILE *in, *out = NULL;
unsigned char *inbuf, *outbuf, *tempbuf;
int i, iterations, check;
uint64_t infile_size, outbuf_size, inbuf_size;
struct inflate_state state;
if (argc > 3 || argc < 2) {
fprintf(stderr, "Usage: isal_inflate_file_perf infile\n"
"\t - Runs multiple iterations of igzip on a file to "
"get more accurate time results.\n");
exit(0);
}
in = fopen(argv[1], "rb");
if (!in) {
fprintf(stderr, "Can't open %s for reading\n", argv[1]);
exit(0);
}
if (argc > 2) {
out = fopen(argv[2], "wb");
if (!out) {
fprintf(stderr, "Can't open %s for writing\n", argv[2]);
exit(0);
}
printf("outfile=%s\n", argv[2]);
}
printf("isal_inflate_perf: \n");
fflush(0);
/* Allocate space for entire input file and output
* (assuming some possible expansion on output size)
*/
infile_size = get_filesize(in);
if (infile_size != 0) {
outbuf_size = infile_size;
iterations = RUN_MEM_SIZE / infile_size;
} else {
printf("Error: input file has 0 size\n");
exit(0);
}
if (iterations < MIN_TEST_LOOPS)
iterations = MIN_TEST_LOOPS;
tempbuf = malloc(infile_size);
if (tempbuf == NULL) {
fprintf(stderr, "Can't allocate temp buffer memory\n");
exit(0);
}
inbuf_size = 2 * infile_size;
inbuf = malloc(inbuf_size);
if (inbuf == NULL) {
fprintf(stderr, "Can't allocate input buffer memory\n");
exit(0);
}
outbuf = malloc(outbuf_size);
if (outbuf == NULL) {
fprintf(stderr, "Can't allocate output buffer memory\n");
exit(0);
}
fread(tempbuf, 1, infile_size, in);
#ifdef ZLIB_9
printf("Using zlib -9 compression\n");
i = compress2(inbuf, &inbuf_size, tempbuf, infile_size, 9);
if (i != Z_OK) {
printf("Compression of input file failed\n");
exit(0);
}
inbuf += 2;
inbuf_size -= 2;
#elif defined(ZLIB_1)
printf("Using zlib -1 compression\n");
i = compress2(inbuf, &inbuf_size, tempbuf, infile_size, 1);
if (i != Z_OK) {
printf("Compression of input file failed\n");
exit(0);
}
inbuf += 2;
inbuf_size -= 2;
#else
printf("Using igzip compression\n");
struct isal_zstream stream;
isal_deflate_init(&stream);
stream.end_of_stream = 1; /* Do the entire file at once */
stream.flush = NO_FLUSH;
stream.next_in = tempbuf;
stream.avail_in = infile_size;
stream.next_out = inbuf;
stream.avail_out = inbuf_size;
#ifdef IGZIP_CUSTOM
struct isal_huff_histogram histogram;
struct isal_hufftables hufftables_custom;
memset(&histogram, 0, sizeof(histogram));
isal_update_histogram(tempbuf, infile_size, &histogram);
isal_create_hufftables(&hufftables_custom, &histogram);
stream.hufftables = &hufftables_custom;
#endif
isal_deflate(&stream);
if (stream.avail_in != 0) {
printf("Compression of input file failed\n");
exit(0);
}
#endif
#ifdef ZLIB_COMPARE
{
printf("igzip_zlib_inflate_perf: %s %d iterations\n", argv[1], iterations);
/* Read complete input file into buffer */
struct perf start, stop;
perf_start(&start);
z_stream gstream;
for (i = 0; i < iterations; i++) {
gstream.next_in = inbuf;
gstream.avail_in = inbuf_size;
gstream.zalloc = Z_NULL;
gstream.zfree = Z_NULL;
gstream.opaque = Z_NULL;
if (0 != inflateInit2(&gstream, -15)) {
printf("Fail zlib init\n");
exit(-1);
}
gstream.next_out = outbuf;
gstream.avail_out = outbuf_size;
check = inflate(&gstream, Z_FINISH);
if (check != 1) {
printf("Error in decompression with error %d\n", check);
break;
}
}
perf_stop(&stop);
printf(" file %s - in_size=%lu out_size=%lu iter=%d\n", argv[1],
infile_size, gstream.total_out, i);
printf("igzip_file: ");
perf_print(stop, start, (long long)infile_size * i);
printf("End of igzip_zlib_inflate_perf\n\n");
}
#endif
printf("isal_inflate_stateless_perf: %s %d iterations\n", argv[1], iterations);
/* Read complete input file into buffer */
fclose(in);
struct perf start, stop;
perf_start(&start);
for (i = 0; i < iterations; i++) {
isal_inflate_init(&state);
state.next_in = inbuf;
state.avail_in = inbuf_size;
state.next_out = outbuf;
state.avail_out = outbuf_size;
check = isal_inflate(&state);
if (check) {
printf("Error in decompression with error %d\n", check);
break;
}
}
perf_stop(&stop);
printf(" file %s - in_size=%lu out_size=%d iter=%d\n", argv[1],
infile_size, state.total_out, i);
printf("igzip_file: ");
perf_print(stop, start, (long long)infile_size * i);
printf("End of isal_inflate_stateless_perf\n\n");
fflush(0);
#if defined(ZLIB_1) || defined(ZLIB_9)
inbuf -= 2;
#endif
free(inbuf);
free(outbuf);
free(tempbuf);
return 0;
}