deb-libisal/igzip/igzip_file_perf.c
Roy Oursler 547e8e1893 igzip: Allow performance check with small input buffers
Add the SMALL_IN_BUFFER compile time condition to igzip_file_perf to perform
perfomance checking when data is separated into small input buffers.

Change-Id: Ic7a6451f23a46773e100b17ce86f84e41e4df48a
Signed-off-by: Roy Oursler <roy.j.oursler@intel.com>
2016-12-06 10:07:06 -07:00

210 lines
5.9 KiB
C

/**********************************************************************
Copyright(c) 2011-2016 Intel Corporation All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
* Neither the name of Intel Corporation nor the names of its
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**********************************************************************/
#include <stdio.h>
#include <stdlib.h>
#include <assert.h>
#include <string.h>
#include "igzip_lib.h"
#include "test.h"
#define BUF_SIZE 1024
#define MIN_TEST_LOOPS 8
#define SMALL_INBUF_SIZE (4 * 1024)
#ifndef RUN_MEM_SIZE
# define RUN_MEM_SIZE 500000000
#endif
struct isal_zstream stream;
int get_filesize(FILE * f)
{
int curr, end;
curr = ftell(f); /* Save current position */
fseek(f, 0L, SEEK_END);
end = ftell(f);
fseek(f, curr, SEEK_SET); /* Restore position */
return end;
}
int main(int argc, char *argv[])
{
FILE *in, *out = NULL;
unsigned char *inbuf, *outbuf;
int i, infile_size, iterations, outbuf_size;
struct isal_huff_histogram histogram;
struct isal_hufftables hufftables_custom;
memset(&histogram, 0, sizeof(histogram));
if (argc > 3 || argc < 2) {
fprintf(stderr, "Usage: igzip_file_perf infile [outfile]\n"
"\t - Runs multiple iterations of igzip on a file to "
"get more accurate time results.\n");
exit(0);
}
in = fopen(argv[1], "rb");
if (!in) {
fprintf(stderr, "Can't open %s for reading\n", argv[1]);
exit(0);
}
if (argc > 2) {
out = fopen(argv[2], "wb");
if (!out) {
fprintf(stderr, "Can't open %s for writing\n", argv[2]);
exit(0);
}
printf("outfile=%s\n", argv[2]);
}
printf("Window Size: %d K\n", IGZIP_HIST_SIZE);
printf("igzip_file_perf: \n");
fflush(0);
/* Allocate space for entire input file and output
* (assuming some possible expansion on output size)
*/
infile_size = get_filesize(in);
if (infile_size != 0) {
outbuf_size = infile_size * 2;
iterations = RUN_MEM_SIZE / infile_size;
} else {
outbuf_size = BUF_SIZE;
iterations = MIN_TEST_LOOPS;
}
if (iterations < MIN_TEST_LOOPS)
iterations = MIN_TEST_LOOPS;
inbuf = malloc(infile_size);
if (inbuf == NULL) {
fprintf(stderr, "Can't allocate input buffer memory\n");
exit(0);
}
outbuf = malloc(outbuf_size);
if (outbuf == NULL) {
fprintf(stderr, "Can't allocate output buffer memory\n");
exit(0);
}
printf("igzip_file_perf: %s %d iterations\n", argv[1], iterations);
/* Read complete input file into buffer */
stream.avail_in = (uint32_t) fread(inbuf, 1, infile_size, in);
if (stream.avail_in != infile_size) {
fprintf(stderr, "Couldn't fit all of input file into buffer\n");
exit(0);
}
struct perf start, stop;
perf_start(&start);
#ifdef SMALL_IN_BUFFER
int avail_in;
for (i = 0; i < iterations; i++) {
isal_deflate_init(&stream);
stream.end_of_stream = 0;
stream.flush = NO_FLUSH;
stream.next_out = outbuf;
stream.avail_out = outbuf_size;
stream.next_in = inbuf;
avail_in = infile_size;
while (avail_in > 0) {
stream.avail_in =
avail_in >= SMALL_INBUF_SIZE ? SMALL_INBUF_SIZE : avail_in;
avail_in -= SMALL_INBUF_SIZE;
if (avail_in <= 0)
stream.end_of_stream = 1;
isal_deflate(&stream);
if (stream.avail_in != 0)
break;
}
}
#else
for (i = 0; i < iterations; i++) {
isal_deflate_init(&stream);
stream.end_of_stream = 1; /* Do the entire file at once */
stream.flush = NO_FLUSH;
stream.next_in = inbuf;
stream.avail_in = infile_size;
stream.next_out = outbuf;
stream.avail_out = outbuf_size;
isal_deflate(&stream);
if (stream.avail_in != 0)
break;
}
#endif
perf_stop(&stop);
if (stream.avail_in != 0) {
fprintf(stderr, "Could not compress all of inbuf\n");
exit(0);
}
printf(" file %s - in_size=%d out_size=%d iter=%d ratio_default=%3.1f%%", argv[1],
infile_size, stream.total_out, i, 100.0 * stream.total_out / infile_size);
isal_update_histogram(inbuf, infile_size, &histogram);
isal_create_hufftables(&hufftables_custom, &histogram);
isal_deflate_init(&stream);
stream.end_of_stream = 1; /* Do the entire file at once */
stream.flush = NO_FLUSH;
stream.next_in = inbuf;
stream.avail_in = infile_size;
stream.next_out = outbuf;
stream.avail_out = outbuf_size;
stream.hufftables = &hufftables_custom;
isal_deflate(&stream);
printf(" ratio_custom=%3.1f%%\n", 100.0 * stream.total_out / infile_size);
if (stream.avail_in != 0) {
fprintf(stderr, "Could not compress all of inbuf\n");
exit(0);
}
printf("igzip_file: ");
perf_print(stop, start, (long long)infile_size * i);
if (argc > 2 && out) {
printf("writing %s\n", argv[2]);
fwrite(outbuf, 1, stream.total_out, out);
fclose(out);
}
fclose(in);
printf("End of igzip_file_perf\n\n");
fflush(0);
return 0;
}