161 lines
6.0 KiB
INI
161 lines
6.0 KiB
INI
# Defines configuration options specific for Arista ML2 Mechanism driver
|
|
|
|
[ml2_arista]
|
|
# (StrOpt) Comma separated list of IP addresses for all CVX instances in
|
|
# the high availabilty CVX cluster. This is a required field with
|
|
# a minimum of one address (if CVX is deployed in a non-redundant
|
|
# (standalone) manner). If not set, all communications to Arista
|
|
# EOS will fail.
|
|
#
|
|
# eapi_host =
|
|
# Example: eapi_host = 192.168.0.1, 192.168.11.1, 192.168.22.1
|
|
#
|
|
# (StrOpt) EOS command API username. This is required field.
|
|
# if not set, all communications to Arista EOS will fail.
|
|
#
|
|
# eapi_username =
|
|
# Example: eapi_username = admin
|
|
#
|
|
# (StrOpt) EOS command API password. This is required field.
|
|
# if not set, all communications to Arista EOS will fail.
|
|
#
|
|
# eapi_password =
|
|
# Example: eapi_password = my_password
|
|
#
|
|
# (StrOpt) Defines if hostnames are sent to Arista EOS as FQDNs
|
|
# ("node1.domain.com") or as short names ("node1"). This is
|
|
# optional. If not set, a value of "True" is assumed.
|
|
#
|
|
# use_fqdn =
|
|
# Example: use_fqdn = True
|
|
#
|
|
# (IntOpt) Sync interval in seconds between Neutron plugin and EOS.
|
|
# This field defines how often the synchronization is performed.
|
|
# This is an optional field. If not set, a value of 30 seconds
|
|
# is assumed.
|
|
#
|
|
# sync_interval =
|
|
# Example: sync_interval = 30
|
|
#
|
|
# (StrOpt) Defines Region Name that is assigned to this OpenStack Controller.
|
|
# This is useful when multiple OpenStack/Neutron controllers are
|
|
# managing the same Arista HW clusters. Note that this name must
|
|
# match with the region name registered (or known) to keystone
|
|
# service. Authentication with Keysotne is performed by EOS.
|
|
# This is optional. If not set, a value of "RegionOne" is assumed.
|
|
#
|
|
# region_name =
|
|
# Example: region_name = RegionOne
|
|
#
|
|
# (BoolOpt) Specifies if the Security Groups need to be deployed for baremetal
|
|
# deployments. If this flag is set to "True", this means switch_info
|
|
# (see below) must be defined. If this flag is not defined, it is
|
|
# assumed to be False.
|
|
#
|
|
# sec_group_support =
|
|
# Example: sec_group_support = True
|
|
#
|
|
# (ListOpt) This is a comma separated list of Arista switches where
|
|
# security groups (i.e. ACLs) need to be applied. Each string has
|
|
# three values separated by ":" in the following format.
|
|
# <switch IP>:<username>:<password>,<switch IP>:<username>:<password>
|
|
# This is required if sec_group_support is set to "True"
|
|
#
|
|
# switch_info =
|
|
# Example: switch_info = 172.13.23.55:admin:admin,172.13.23.56:admin:admin
|
|
#
|
|
# (StrOpt) Tells the plugin to use a sepcific API interfaces to communicate
|
|
# with CVX. Valid options are:
|
|
# EAPI - Use EOS' extensible API.
|
|
# JSON - Use EOS' JSON/REST API.
|
|
# api_type =
|
|
# Example: api_type = EAPI
|
|
#
|
|
# (ListOpt) This is a comma separated list of physical networks which are
|
|
# managed by Arista switches. This list will be used in
|
|
# by the Arista ML2 plugin to make the decision if it can
|
|
# participate on binding or updating a port.
|
|
#
|
|
# managed_physnets =
|
|
# Example: managed_physnets = arista_network
|
|
#
|
|
# (BoolOpt) Specifies whether the Arista ML2 plugin should bind ports to vxlan
|
|
# fabric segments and dynamically allocate vlan segments based on
|
|
# the host to connect the port to the vxlan fabric.
|
|
#
|
|
# manage_fabric =
|
|
# Example: manage_fabric = False
|
|
|
|
|
|
[l3_arista]
|
|
|
|
# (StrOpt) primary host IP address. This is required field. If not set, all
|
|
# communications to Arista EOS will fail. This is the host where
|
|
# primary router is created.
|
|
#
|
|
# primary_l3_host =
|
|
# Example: primary_l3_host = 192.168.10.10
|
|
#
|
|
# (StrOpt) Primary host username. This is required field.
|
|
# if not set, all communications to Arista EOS will fail.
|
|
#
|
|
# primary_l3_host_username =
|
|
# Example: primary_l3_username = admin
|
|
#
|
|
# (StrOpt) Primary host password. This is required field.
|
|
# if not set, all communications to Arista EOS will fail.
|
|
#
|
|
# primary_l3_host_password =
|
|
# Example: primary_l3_password = my_password
|
|
#
|
|
# (StrOpt) IP address of the second Arista switch paired as
|
|
# MLAG (Multi-chassis Link Aggregation) with the first.
|
|
# This is optional field, however, if mlag_config flag is set,
|
|
# then this is a required field. If not set, all
|
|
# communications to Arista EOS will fail. If mlag_config is set
|
|
# to False, then this field is ignored
|
|
#
|
|
# secondary_l3_host =
|
|
# Example: secondary_l3_host = 192.168.10.20
|
|
#
|
|
# (IntOpt) Connection timeout interval in seconds. This interval
|
|
# defines how long an EAPI request from the driver to '
|
|
# EOS waits before timing out. If not set, a value of 10
|
|
# seconds is assumed.
|
|
#
|
|
# conn_timeout =
|
|
# Example: conn_timeout = 10
|
|
#
|
|
# (BoolOpt) Defines if Arista switches are configured in MLAG mode
|
|
# If yes, all L3 configuration is pushed to both switches
|
|
# automatically. If this flag is set, ensure that secondary_l3_host
|
|
# is set to the second switch's IP.
|
|
# This flag is Optional. If not set, a value of "False" is assumed.
|
|
#
|
|
# mlag_config =
|
|
# Example: mlag_config = True
|
|
#
|
|
# (BoolOpt) Defines if the router is created in default VRF or a
|
|
# a specific VRF. This is optional.
|
|
# If not set, a value of "False" is assumed.
|
|
#
|
|
# Example: use_vrf = True
|
|
#
|
|
# (IntOpt) Sync interval in seconds between Neutron plugin and EOS.
|
|
# This field defines how often the synchronization is performed.
|
|
# This is an optional field. If not set, a value of 180 seconds
|
|
# is assumed.
|
|
#
|
|
# l3_sync_interval =
|
|
# Example: l3_sync_interval = 60
|
|
|
|
[arista_type_driver]
|
|
|
|
# (IntOpt) VLAN Sync interval in seconds between the type driver and EOS.
|
|
# This interval defines how often the VLAN synchronization is
|
|
# performed. This is an optional field. If not set, a value of
|
|
# 10 seconds is assumed.
|
|
#
|
|
# sync_interval =
|
|
# Example: sync_interval = 10
|