diff --git a/install-guide/source/common_prerequisites.rst b/install-guide/source/common_prerequisites.rst
new file mode 100644
index 000000000..af2705a78
--- /dev/null
+++ b/install-guide/source/common_prerequisites.rst
@@ -0,0 +1,39 @@
+Prerequisites
+-------------
+
+Before you install and configure the DNS service,
+you must create service credentials and API endpoints.
+
+#. Source the ``admin`` credentials to gain access to
+   admin-only CLI commands:
+
+   .. code-block:: console
+
+      $ source admin-openrc
+
+#. To create the service credentials, complete these steps:
+
+   * Create the ``designate`` user:
+
+     .. code-block:: console
+
+        $ openstack user create --domain default --password-prompt designate
+
+   * Add the ``admin`` role to the ``designate`` user:
+
+     .. code-block:: console
+
+        $ openstack role add --project service --user designate admin
+
+   * Create the designate service entities:
+
+     .. code-block:: console
+
+        $ openstack service create --name designate --description "DNS" dns
+
+#. Create the DNS service API endpoint:
+
+   .. code-block:: console
+
+      $ openstack endpoint create --region RegionOne \
+        dns public http://controller:9001/
\ No newline at end of file
diff --git a/install-guide/source/conf.py b/install-guide/source/conf.py
new file mode 100644
index 000000000..4f77a5b86
--- /dev/null
+++ b/install-guide/source/conf.py
@@ -0,0 +1,302 @@
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+# implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# This file is execfile()d with the current directory set to its
+# containing dir.
+#
+# Note that not all possible configuration values are present in this
+# autogenerated file.
+#
+# All configuration values have a default; values that are commented out
+# serve to show the default.
+
+import os
+# import sys
+
+
+import openstackdocstheme
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+# sys.path.insert(0, os.path.abspath('.'))
+
+# -- General configuration ------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+# needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+# TODO(ajaeger): enable PDF building, for example add 'rst2pdf.pdfbuilder'
+# extensions =
+
+# Add any paths that contain templates here, relative to this directory.
+# templates_path = ['_templates']
+
+# The suffix of source filenames.
+source_suffix = '.rst'
+
+# The encoding of source files.
+# source_encoding = 'utf-8-sig'
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = u'Installation Guide for DNS Service'
+bug_tag = u'install-guide'
+copyright = u'2016, OpenStack contributors'
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# The short X.Y version.
+version = '0.1'
+# The full version, including alpha/beta/rc tags.
+release = '0.1'
+
+# A few variables have to be set for the log-a-bug feature.
+#   giturl: The location of conf.py on Git. Must be set manually.
+#   gitsha: The SHA checksum of the bug description. Automatically extracted
+#   from git log.
+#   bug_tag: Tag for categorizing the bug. Must be set manually.
+# These variables are passed to the logabug code via html_context.
+giturl = u'http://git.openstack.org/cgit/openstack/designate/tree/'\
+         u'install-guide/source'
+git_cmd = "/usr/bin/git log | head -n1 | cut -f2 -d' '"
+gitsha = os.popen(git_cmd).read().strip('\n')
+html_context = {"gitsha": gitsha, "bug_tag": bug_tag,
+                "giturl": giturl,
+                "bug_project": "designate"}
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+# language = None
+
+# There are two options for replacing |today|: either, you set today to some
+# non-false value, then it is used:
+# today = ''
+# Else, today_fmt is used as the format for a strftime call.
+# today_fmt = '%B %d, %Y'
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+exclude_patterns = ["common_prerequisites.rst", "common_configure.rst"]
+
+# The reST default role (used for this markup: `text`) to use for all
+# documents.
+# default_role = None
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+# add_function_parentheses = True
+
+# If true, the current module name will be prepended to all description
+# unit titles (such as .. function::).
+# add_module_names = True
+
+# If true, sectionauthor and moduleauthor directives will be shown in the
+# output. They are ignored by default.
+# show_authors = False
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# A list of ignored prefixes for module index sorting.
+# modindex_common_prefix = []
+
+# If true, keep warnings as "system message" paragraphs in the built documents.
+# keep_warnings = False
+
+
+# -- Options for HTML output ----------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+html_theme = 'openstackdocs'
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+# html_theme_options = {}
+
+# Add any paths that contain custom themes here, relative to this directory.
+html_theme_path = [openstackdocstheme.get_html_theme_path()]
+
+# The name for this set of Sphinx documents.  If None, it defaults to
+# "<project> v<release> documentation".
+# html_title = None
+
+# A shorter title for the navigation bar.  Default is the same as html_title.
+# html_short_title = None
+
+# The name of an image file (relative to this directory) to place at the top
+# of the sidebar.
+# html_logo = None
+
+# The name of an image file (within the static path) to use as favicon of the
+# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
+# pixels large.
+# html_favicon = None
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+# html_static_path = []
+
+# Add any extra paths that contain custom files (such as robots.txt or
+# .htaccess) here, relative to this directory. These files are copied
+# directly to the root of the documentation.
+# html_extra_path = []
+
+# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
+# using the given strftime format.
+# So that we can enable "log-a-bug" links from each output HTML page, this
+# variable must be set to a format that includes year, month, day, hours and
+# minutes.
+html_last_updated_fmt = '%Y-%m-%d %H:%M'
+
+
+# If true, SmartyPants will be used to convert quotes and dashes to
+# typographically correct entities.
+# html_use_smartypants = True
+
+# Custom sidebar templates, maps document names to template names.
+# html_sidebars = {}
+
+# Additional templates that should be rendered to pages, maps page names to
+# template names.
+# html_additional_pages = {}
+
+# If false, no module index is generated.
+# html_domain_indices = True
+
+# If false, no index is generated.
+html_use_index = False
+
+# If true, the index is split into individual pages for each letter.
+# html_split_index = False
+
+# If true, links to the reST sources are added to the pages.
+html_show_sourcelink = False
+
+# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
+# html_show_sphinx = True
+
+# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
+# html_show_copyright = True
+
+# If true, an OpenSearch description file will be output, and all pages will
+# contain a <link> tag referring to it.  The value of this option must be the
+# base URL from which the finished HTML is served.
+# html_use_opensearch = ''
+
+# This is the file name suffix for HTML files (e.g. ".xhtml").
+# html_file_suffix = None
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'install-guide'
+
+# If true, publish source files
+html_copy_source = False
+
+# -- Options for LaTeX output ---------------------------------------------
+
+latex_elements = {
+    # The paper size ('letterpaper' or 'a4paper').
+    # 'papersize': 'letterpaper',
+
+    # The font size ('10pt', '11pt' or '12pt').
+    # 'pointsize': '10pt',
+
+    # Additional stuff for the LaTeX preamble.
+    # 'preamble': '',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+#  author, documentclass [howto, manual, or own class]).
+latex_documents = [
+    ('index', 'InstallGuide.tex', u'Install Guide',
+     u'OpenStack contributors', 'manual'),
+]
+
+# The name of an image file (relative to this directory) to place at the top of
+# the title page.
+# latex_logo = None
+
+# For "manual" documents, if this is true, then toplevel headings are parts,
+# not chapters.
+# latex_use_parts = False
+
+# If true, show page references after internal links.
+# latex_show_pagerefs = False
+
+# If true, show URL addresses after external links.
+# latex_show_urls = False
+
+# Documents to append as an appendix to all manuals.
+# latex_appendices = []
+
+# If false, no module index is generated.
+# latex_domain_indices = True
+
+
+# -- Options for manual page output ---------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+    ('index', 'installguide', u'Install Guide',
+     [u'OpenStack contributors'], 1)
+]
+
+# If true, show URL addresses after external links.
+# man_show_urls = False
+
+
+# -- Options for Texinfo output -------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+    ('index', 'InstallGuide', u'Install Guide',
+     u'OpenStack contributors', 'InstallGuide',
+     'This guide shows OpenStack end users how to install '
+     'an OpenStack cloud.', 'Miscellaneous'),
+]
+
+# Documents to append as an appendix to all manuals.
+# texinfo_appendices = []
+
+# If false, no module index is generated.
+# texinfo_domain_indices = True
+
+# How to display URL addresses: 'footnote', 'no', or 'inline'.
+# texinfo_show_urls = 'footnote'
+
+# If true, do not generate a @detailmenu in the "Top" node's menu.
+# texinfo_no_detailmenu = False
+
+# -- Options for Internationalization output ------------------------------
+locale_dirs = ['locale/']
+
+# -- Options for PDF output --------------------------------------------------
+
+pdf_documents = [
+    ('index', u'InstallGuide', u'Install Guide',
+     u'OpenStack contributors')
+]
diff --git a/install-guide/source/create-zone.rst b/install-guide/source/create-zone.rst
new file mode 100644
index 000000000..01af1e48d
--- /dev/null
+++ b/install-guide/source/create-zone.rst
@@ -0,0 +1,81 @@
+.. _create-zone:
+
+Create a Zone
+~~~~~~~~~~~~~
+
+In environments that include the DNS service, you can create a DNS Zone.
+
+#. Source the ``demo`` credentials to perform
+   the following steps as a non-administrative project:
+
+   .. code-block:: console
+
+      $ . demo-openrc
+
+#. Create a Zone called ``example.com.``:
+
+   .. code-block:: console
+
+      $ openstack zone create --email dnsmaster@example.com. example.com.
+      +----------------+--------------------------------------+
+      | Field          | Value                                |
+      +----------------+--------------------------------------+
+      | action         | CREATE                               |
+      | attributes     | {}                                   |
+      | created_at     | 2016-07-13T14:54:16.000000           |
+      | description    | None                                 |
+      | email          | dnsmaster@example.com                |
+      | id             | 14093115-0f0f-497a-ac69-42235e46c26f |
+      | masters        |                                      |
+      | name           | example.com.                         |
+      | pool_id        | 794ccc2c-d751-44fe-b57f-8894c9f5c842 |
+      | project_id     | 656bc359067844fba6005d400f19df76     |
+      | serial         | 1468421656                           |
+      | status         | PENDING                              |
+      | transferred_at | None                                 |
+      | ttl            | 3600                                 |
+      | type           | PRIMARY                              |
+      | updated_at     | None                                 |
+      | version        | 1                                    |
+      +----------------+--------------------------------------+
+
+#. After a short time, verify successful creation of the zone
+
+   .. code-block:: console
+
+      $ openstack zone list
+      +--------------------------------------+--------------+---------+------------+--------+--------+
+      | id                                   | name         | type    |     serial | status | action |
+      +--------------------------------------+--------------+---------+------------+--------+--------+
+      | 14093115-0f0f-497a-ac69-42235e46c26f | example.com. | PRIMARY | 1468421656 | ACTIVE | NONE   |
+      +--------------------------------------+--------------+---------+------------+--------+--------+
+
+#. We can now create RecordSets in this zone
+
+   .. code-block:: console
+
+      $ openstack recordset create --records '10.0.0.1' --type A example.com. www
+      +-------------+--------------------------------------+
+      | Field       | Value                                |
+      +-------------+--------------------------------------+
+      | action      | CREATE                               |
+      | created_at  | 2016-07-13T14:59:32.000000           |
+      | description | None                                 |
+      | id          | 07e6f5af-783e-481f-b8df-5972a6174c94 |
+      | name        | www.example.com.                     |
+      | project_id  | 656bc359067844fba6005d400f19df76     |
+      | records     | 10.0.0.1                             |
+      | status      | PENDING                              |
+      | ttl         | None                                 |
+      | type        | A                                    |
+      | updated_at  | None                                 |
+      | version     | 1                                    |
+      | zone_id     | 14093115-0f0f-497a-ac69-42235e46c26f |
+      | zone_name   | example.com.                         |
+      +-------------+--------------------------------------+
+
+#. Delete the zone.
+
+   .. code-block:: console
+
+      $ openstack zone delete example.com.
diff --git a/install-guide/source/get_started.rst b/install-guide/source/get_started.rst
new file mode 100644
index 000000000..ac7c0e247
--- /dev/null
+++ b/install-guide/source/get_started.rst
@@ -0,0 +1,48 @@
+====================
+DNS service overview
+====================
+
+The DNS service provides DNS Zone and RecordSet management for OpenStack
+clouds. The DNS Service includes a REST API, a command-line client, and a
+Horizon Dashboard plugin.
+
+The DNS service consists of the following components:
+
+``openstack`` command-line client plugin
+  A plugin for the OpenStack Client CLI that communicates with the REST API
+
+``designate-api`` component
+  An OpenStack-native REST API that processes API requests by sending
+  them to the ``designate-central`` over Remote Procedure Call (RPC).
+
+``designate-central`` component
+  Orchestrates the creation, deletion and update of Zones and RecordSets, and
+  delegates work to ``designate-pool-manager`` for interaction with the DNS
+  servers
+
+``designate-producer`` component
+  Orchestrates periodic tasks that are run by designate.
+
+``designate-worker`` component
+  Is a generic task runner, that runs both zone create / update and deletes,
+  and periodic tasks, from ``designate-producer``
+
+``designate-mdns`` component
+  A small DNS Server that is responsible for pushing DNS Zone information to
+  the customer facing DNS Servers. Can also pull in DNS information about
+  DNS Zones hosted outside of the Designate infrastructure
+
+``designate-agent`` component
+  A small python daemon that can be used for a limited sub set of DNS Servers
+  Some DNS Servers requrire commands be run locally, and to do this we use
+  this component.
+
+  .. note:: The majority of Designate installs will not need this component.
+
+``Customer Facing DNS Servers``
+  Serves DNS requests to end users. They are orchestreated by the
+  ``designate-worker``, and the supported list is maintained `here`_
+
+
+  .. _here: http://docs.openstack.org/developer/designate/support-matrix.html
+
diff --git a/install-guide/source/index.rst b/install-guide/source/index.rst
new file mode 100644
index 000000000..8965541c2
--- /dev/null
+++ b/install-guide/source/index.rst
@@ -0,0 +1,16 @@
+===========
+DNS service
+===========
+
+.. toctree::
+   :maxdepth: 2
+
+   get_started
+   install
+   verify
+   create-zone
+   next-steps
+
+This chapter assumes a working setup of OpenStack following the
+`OpenStack Installation Tutorial <http://docs.openstack.org/#install-guides>`_.
+
diff --git a/install-guide/source/install-ubuntu.rst b/install-guide/source/install-ubuntu.rst
new file mode 100644
index 000000000..43a870eef
--- /dev/null
+++ b/install-guide/source/install-ubuntu.rst
@@ -0,0 +1,224 @@
+.. _install-ubuntu:
+
+Install and configure for Ubuntu
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This section describes how to install and configure the DNS
+service for Ubuntu 14.04 (LTS).
+
+.. include:: common_prerequisites.rst
+
+Install and configure components
+--------------------------------
+
+.. note::
+
+   Default configuration files vary by distribution. You might need
+   to add these sections and options rather than modifying existing
+   sections and options. Also, an ellipsis (``...``) in the configuration
+   snippets indicates potential default configuration options that you
+   should retain.
+
+#. Install the packages:
+
+   .. code-block:: console
+
+      # apt-get install designate
+
+#. Create the databases:
+
+   .. code-block:: console
+
+      # mysql
+
+   .. code-block:: sql
+
+      CREATE DATABASE `designate`
+      GRANT ALL PRIVILEGES ON designate.* TO 'designate'@'localhost' \
+      IDENTIFIED BY 'DESIGNATE_DBPASS';
+
+
+#. Install the BIND9 packages:
+
+   .. code-block:: console
+
+      # apt-get install bind9
+
+#. Add the following options in the ``/etc/bind/named.conf.options`` file:
+
+   .. code-block:: none
+
+      options {
+          ...
+          allow-new-zones yes;
+          request-ixfr no;
+          recursion no;
+      };
+
+#. Create an RNDC Key:
+
+   .. code-block:: console
+
+      # rndc-confgen -a -k designate -c /etc/designate/rndc.key
+
+#. Add the key to ``/etc/bind/named.conf``
+
+   .. code-block:: none
+
+      ...
+      # This should be the contents of ``/etc/designate/rndc.key``
+      key "designate" {
+        algorithm hmac-md5;
+        secret "OAkHNQy0m6UPcv55fiVAPw==";
+      };
+      # End of content from ``/etc/designate/rndc.key``
+
+      controls {
+        inet 127.0.0.1 port 953
+          allow { 127.0.0.1; } keys { "designate"; };
+      };
+
+
+#. Restart the DNS service:
+
+   .. code-block:: console
+
+      # service bind9 restart
+
+#. Edit the ``/etc/designate/designate.conf`` file and
+   complete the following actions:
+
+   * In the ``[service:api]`` section, configure ``auth_strategy``:
+
+     .. code-block:: ini
+
+        [service:api]
+        api_host = 0.0.0.0
+        api_port = 9001
+        auth_strategy = keystone
+        enable_api_v1 = True
+        enabled_extensions_v1 = quotas, reports
+        enable_api_v2 = True
+
+   * In the ``[keystone_authtoken]`` section, configure the following options:
+
+     .. code-block:: ini
+
+        [keystone_authtoken]
+        auth_host = controller
+        auth_port = 35357
+        auth_protocol = http
+        admin_tenant_name = service
+        admin_user = designate
+        admin_password = DESIGNATE_PASS
+
+     Replace DESIGNATE_PASS with the password you chose for the ``designate``
+     user in the Identity service.
+
+   * In the ``[service:worker]`` section, enable the worker model:
+
+    .. code-block:: ini
+
+       enabled = True
+       notify = True
+
+   * In the ``[storage:sqlalchemy]`` section, configure database access:
+
+     .. code-block:: ini
+
+        [storage:sqlalchemy]
+        connection = mysql+pymysql://designate:DESIGNATE_DBPASS@controller/designate
+
+     ``DESIGNATE_DBPASS`` is automatically set to the password
+     you chose for the Designate database.
+
+   * Populate the designate database
+
+     .. code-block:: console
+
+        # su -s /bin/sh -c "designate-manage database sync" designate
+
+
+#. Restart the Designate central and API services:
+
+   .. code-block:: console
+
+      # service designate-central restart
+      # service designate-api restart
+
+#. Create a pools.yaml file in ``/etc/designate/pools.yaml``
+
+    .. code-block:: console
+
+      # editor /etc/designate/pools.yaml
+
+    .. code-block:: yaml
+
+      - name: default
+        # The name is immutable. There will be no option to change the name after
+        # creation and the only way will to change it will be to delete it
+        # (and all zones associated with it) and recreate it.
+        description: Default Pool
+
+        attributes: {}
+
+        # List out the NS records for zones hosted within this pool
+        # This should be a record that is created outside of designate, that
+        # points to the public IP of the controller node.
+        ns_records:
+          - hostname: ns1-1.example.org.
+            priority: 1
+
+        # List out the nameservers for this pool. These are the actual BIND servers.
+        # We use these to verify changes have propagated to all nameservers.
+        nameservers:
+          - host: 127.0.0.1
+            port: 53
+
+        # List out the targets for this pool. For BIND there will be one
+        # entry for each BIND server, as we have to run rndc command on each server
+        targets:
+          - type: bind
+            description: BIND9 Server 1
+
+            # List out the designate-mdns servers from which BIND servers should
+            # request zone transfers (AXFRs) from.
+            # This should be the IP of the controller node.
+            # If you have multiple controllers you can add multiple masters
+            # by running designate-mdns on them, and adding them here.
+            masters:
+              - host: 127.0.0.1
+                port: 5354
+
+            # BIND Configuration options
+            options:
+              host: 127.0.0.1
+              port: 53
+              rndc_host: 127.0.0.1
+              rndc_port: 953
+              rndc_key_file: /etc/designate/rndc.key
+
+
+#. Ensure the output file is correct (reference sample file for each value)
+#. Run
+
+   .. code-block:: console
+
+        sudo su -s /bin/sh -c "designate-manage pools update" designate
+
+
+#. Install Designate Worker, producer and mini-dns
+
+   .. code-block:: console
+
+      # apt install designate-worker
+      # apt install designate-producer
+      # apt install designate-mdns
+
+#. Restart Designate services and mDNS services:
+
+   .. code-block:: console
+
+      # service designate-worker restart
+      # service designate-producer restart
+      # service designate-mdns restart
diff --git a/install-guide/source/install.rst b/install-guide/source/install.rst
new file mode 100644
index 000000000..684ca6ed4
--- /dev/null
+++ b/install-guide/source/install.rst
@@ -0,0 +1,18 @@
+.. _install:
+
+Install and configure
+~~~~~~~~~~~~~~~~~~~~~
+
+This section describes how to install and configure the
+DNS service, code-named designate, on the controller node.
+
+This section assumes that you already have a working OpenStack
+environment with at least the following components installed:
+.. (add the appropriate services here and further notes)
+
+Note that installation and configuration vary by distribution.
+
+.. toctree::
+   :maxdepth: 2
+
+   install-ubuntu.rst
diff --git a/install-guide/source/next-steps.rst b/install-guide/source/next-steps.rst
new file mode 100644
index 000000000..5c398cf9b
--- /dev/null
+++ b/install-guide/source/next-steps.rst
@@ -0,0 +1,12 @@
+.. _next-steps:
+
+Next steps
+~~~~~~~~~~
+
+Your OpenStack environment now includes the designate service.
+
+To add additional services, see
+docs.openstack.org/install-guides/index.html .
+
+To learn more about the designate service, read the `Designate developer documentation
+<http://docs.openstack.org/developer/designate/index.html>`__.
diff --git a/install-guide/source/verify.rst b/install-guide/source/verify.rst
new file mode 100644
index 000000000..440e813d2
--- /dev/null
+++ b/install-guide/source/verify.rst
@@ -0,0 +1,38 @@
+.. _verify:
+
+Verify operation
+~~~~~~~~~~~~~~~~
+
+Verify operation of the DNS service.
+
+.. note::
+
+   Perform these commands on the controller node.
+
+#. Source the ``admin`` tenant credentials:
+
+   .. code-block:: console
+
+      $ . admin-openrc
+
+#. List service components to verify successful launch and
+   registration of each process:
+
+   .. code-block:: console
+
+      $ openstack dns service list
+      +--------------------------------------+--------------------------+--------------+--------+-------+--------------+
+      | id                                   | hostname                 | service_name | status | stats | capabilities |
+      +--------------------------------------+--------------------------+--------------+--------+-------+--------------+
+      | 14283849-ff64-4467-9cbb-d9050ffa08c0 | vagrant-ubuntu-trusty-64 | central      | UP     | -     | -            |
+      | eb7d938f-5b24-4c9b-b4f7-05b9a8ea45f2 | vagrant-ubuntu-trusty-64 | api          | UP     | -     | -            |
+      | 5dca293e-5fa2-4a3d-b486-4debad920da3 | vagrant-ubuntu-trusty-64 | zone_manager | UP     | -     | -            |
+      | 487e7215-6f61-495d-87b3-86be09406750 | vagrant-ubuntu-trusty-64 | mdns         | UP     | -     | -            |
+      | 6b1d1de6-c820-4843-993b-663fca73f905 | vagrant-ubuntu-trusty-64 | pool_manager | UP     | -     | -            |
+      +--------------------------------------+--------------------------+--------------+--------+-------+--------------+
+
+   .. note::
+
+      This output should indicate at least one of each of the ``central``,
+      ``api``, ``zone_manager``, ``mdns`` and ``pool_manager`` components
+      on the controller node.
diff --git a/test-requirements.txt b/test-requirements.txt
index 87f32c82d..8889a2ee4 100644
--- a/test-requirements.txt
+++ b/test-requirements.txt
@@ -23,3 +23,4 @@ reno>=1.8.0 # Apache-2.0
 bandit>=1.1.0 # Apache-2.0
 os-api-ref>=1.0.0 # Apache-2.0
 zake>=0.1.6 # Apache-2.0
+openstackdocstheme>=1.5.0  # Apache-2.0
diff --git a/tox.ini b/tox.ini
index 0365d7b34..974505e25 100644
--- a/tox.ini
+++ b/tox.ini
@@ -112,6 +112,13 @@ commands =
 [testenv:releasenotes]
 commands = sphinx-build -a -E -d releasenotes/build/doctrees -b html releasenotes/source releasenotes/build/html
 
+[testenv:install-guide]
+# NOTE(jaegerandi): this target does not use constraints because
+# upstream infra does not yet support it. Once that's fixed, we can
+# drop the install_command.
+install_command = pip install {opts} {packages}
+commands = sphinx-build -a -E -d install-guide/build/doctrees -b html install-guide/source install-guide/build/html
+
 [testenv:venv]
 commands = {posargs}