designate/devstack/plugin.sh
Akihiro Motoki c55852568f devstack: compile message catalogs during stack.sh
It is required to compile i18n message catalogs during stack.sh
to display translated messages appropriately.

Change-Id: Ic44d8d5b12be1a9128c871f223c9d8712b3205e1
2016-03-25 22:17:56 +09:00

355 lines
13 KiB
Bash
Executable File
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Install and start **Designate** service in Devstack
# Save trace setting
XTRACE=$(set +o | grep xtrace)
set +o xtrace
# Get backend configuration
# ----------------------------
if is_service_enabled designate && [[ -r $DESIGNATE_PLUGINS/backend-$DESIGNATE_BACKEND_DRIVER ]]; then
# Load plugin
source $DESIGNATE_PLUGINS/backend-$DESIGNATE_BACKEND_DRIVER
fi
# Helper Functions
# ----------------
function setup_colorized_logging_designate {
local conf_file=$1
local conf_section=$2
local project_var=${3:-"project_name"}
local user_var=${4:-"user_name"}
setup_colorized_logging $conf_file $conf_section $project_var $user_var
# Override the logging_context_format_string value chosen by
# setup_colorized_logging.
iniset $conf_file $conf_section logging_context_format_string "%(asctime)s.%(msecs)03d %(color)s%(levelname)s %(name)s [%(request_id)s %(user_identity)s%(color)s] %(instance)s%(color)s%(message)s"
}
# DevStack Plugin
# ---------------
# cleanup_designate - Remove residual data files, anything left over from previous
# runs that a clean run would need to clean up
function cleanup_designate {
sudo rm -rf $DESIGNATE_STATE_PATH $DESIGNATE_AUTH_CACHE_DIR
cleanup_designate_backend
}
# configure_designate - Set config files, create data dirs, etc
function configure_designate {
[ ! -d $DESIGNATE_CONF_DIR ] && sudo mkdir -m 755 -p $DESIGNATE_CONF_DIR
sudo chown $STACK_USER $DESIGNATE_CONF_DIR
[ ! -d $DESIGNATE_LOG_DIR ] && sudo mkdir -m 755 -p $DESIGNATE_LOG_DIR
sudo chown $STACK_USER $DESIGNATE_LOG_DIR
# (Re)create ``designate.conf``
rm -f $DESIGNATE_CONF
# General Configuration
iniset_rpc_backend designate $DESIGNATE_CONF DEFAULT
iniset $DESIGNATE_CONF DEFAULT rpc_response_timeout 5
iniset $DESIGNATE_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
iniset $DESIGNATE_CONF DEFAULT verbose True
iniset $DESIGNATE_CONF DEFAULT state_path $DESIGNATE_STATE_PATH
iniset $DESIGNATE_CONF DEFAULT root-helper sudo designate-rootwrap $DESIGNATE_ROOTWRAP_CONF
iniset $DESIGNATE_CONF storage:sqlalchemy connection `database_connection_url designate`
# Coordination Configuration
if [[ -n "$DESIGNATE_COORDINATION_URL" ]]; then
iniset $DESIGNATE_CONF coordination backend_url $DESIGNATE_COORDINATION_URL
fi
# Install the policy file for the API server
cp $DESIGNATE_DIR/etc/designate/policy.json $DESIGNATE_CONF_DIR/policy.json
iniset $DESIGNATE_CONF DEFAULT policy_file $DESIGNATE_CONF_DIR/policy.json
# Pool Manager Configuration
iniset $DESIGNATE_CONF service:pool_manager pool_id $DESIGNATE_POOL_ID
iniset $DESIGNATE_CONF service:pool_manager cache_driver $DESIGNATE_POOL_MANAGER_CACHE_DRIVER
iniset $DESIGNATE_CONF service:pool_manager periodic_recovery_interval $DESIGNATE_PERIODIC_RECOVERY_INTERVAL
iniset $DESIGNATE_CONF service:pool_manager periodic_sync_interval $DESIGNATE_PERIODIC_SYNC_INTERVAL
# Pool Manager Cache
if [ "$DESIGNATE_POOL_MANAGER_CACHE_DRIVER" == "sqlalchemy" ]; then
iniset $DESIGNATE_CONF pool_manager_cache:sqlalchemy connection `database_connection_url designate_pool_manager`
fi
# API Configuration
sudo cp $DESIGNATE_DIR/etc/designate/api-paste.ini $DESIGNATE_APIPASTE_CONF
iniset $DESIGNATE_CONF service:api enabled_extensions_v1 $DESIGNATE_ENABLED_EXTENSIONS_V1
iniset $DESIGNATE_CONF service:api enabled_extensions_v2 $DESIGNATE_ENABLED_EXTENSIONS_V2
iniset $DESIGNATE_CONF service:api enabled_extensions_admin $DESIGNATE_ENABLED_EXTENSIONS_ADMIN
iniset $DESIGNATE_CONF service:api api_host $DESIGNATE_SERVICE_HOST
iniset $DESIGNATE_CONF service:api api_base_uri $DESIGNATE_SERVICE_PROTOCOL://$DESIGNATE_SERVICE_HOST:$DESIGNATE_SERVICE_PORT/
iniset $DESIGNATE_CONF service:api enable_api_v1 True
iniset $DESIGNATE_CONF service:api enable_api_v2 True
iniset $DESIGNATE_CONF service:api enable_api_admin True
# mDNS Configuration
iniset $DESIGNATE_CONF service:mdns host $DESIGNATE_SERVICE_HOST
iniset $DESIGNATE_CONF service:mdns port $DESIGNATE_SERVICE_PORT_MDNS
# Set up Notifications/Ceilometer Integration
iniset $DESIGNATE_CONF DEFAULT notification_driver "$DESIGNATE_NOTIFICATION_DRIVER"
iniset $DESIGNATE_CONF DEFAULT notification_topics "$DESIGNATE_NOTIFICATION_TOPICS"
# Root Wrap
sudo cp $DESIGNATE_DIR/etc/designate/rootwrap.conf.sample $DESIGNATE_ROOTWRAP_CONF
iniset $DESIGNATE_ROOTWRAP_CONF DEFAULT filters_path $DESIGNATE_DIR/etc/designate/rootwrap.d root-helper
# Oslo Concurrency
iniset $DESIGNATE_CONF oslo_concurrency lock_path "$DESIGNATE_STATE_PATH"
# Set up the rootwrap sudoers for designate
local rootwrap_sudoer_cmd="$DESIGNATE_BIN_DIR/designate-rootwrap $DESIGNATE_ROOTWRAP_CONF *"
local tempfile=`mktemp`
echo "$STACK_USER ALL=(root) NOPASSWD: $rootwrap_sudoer_cmd" >$tempfile
chmod 0440 $tempfile
sudo chown root:root $tempfile
sudo mv $tempfile /etc/sudoers.d/designate-rootwrap
# TLS Proxy Configuration
if is_service_enabled tls-proxy; then
# Set the service port for a proxy to take the original
iniset $DESIGNATE_CONF service:api api_port $DESIGNATE_SERVICE_PORT_INT
else
iniset $DESIGNATE_CONF service:api api_port $DESIGNATE_SERVICE_PORT
fi
# Setup the Keystone Integration
if is_service_enabled key; then
iniset $DESIGNATE_CONF service:api auth_strategy keystone
configure_auth_token_middleware $DESIGNATE_CONF designate $DESIGNATE_AUTH_CACHE_DIR
fi
# Logging Configuration
if [ "$SYSLOG" != "False" ]; then
iniset $DESIGNATE_CONF DEFAULT use_syslog True
fi
# Format logging
if [ "$LOG_COLOR" == "True" ] && [ "$SYSLOG" == "False" ]; then
setup_colorized_logging_designate $DESIGNATE_CONF DEFAULT "tenant" "user"
fi
# Backend Plugin Configuation
configure_designate_backend
}
function configure_designatedashboard {
# Compile message catalogs
if [ -d ${DESIGNATEDASHBOARD_DIR}/designatedashboard/locale ]; then
(cd ${DESIGNATEDASHBOARD_DIR}/designatedashboard; DJANGO_SETTINGS_MODULE=openstack_dashboard.settings ../manage.py compilemessages)
fi
}
# Configure the needed tempest options
function configure_designate_tempest() {
if is_service_enabled tempest; then
nameservers=$DESIGNATE_SERVICE_HOST:$DESIGNATE_SERVICE_PORT_DNS
case $DESIGNATE_BACKEND_DRIVER in
bind9|powerdns)
nameservers="$DESIGNATE_SERVICE_HOST:$DESIGNATE_SERVICE_PORT_DNS"
;;
akamai)
nameservers="$DESIGNATE_AKAMAI_NAMESERVERS"
;;
dynect)
nameservers="$DESIGNATE_DYNECT_NAMESERVERS"
;;
esac
if [ ! -z "$DESIGNATE_NAMESERVERS" ]; then
nameservers=$DESIGNATE_NAMESERVERS
fi
iniset $TEMPEST_CONFIG designate nameservers $nameservers
fi
}
# create_designate_accounts - Set up common required designate accounts
# Tenant User Roles
# ------------------------------------------------------------------
# service designate admin # if enabled
function create_designate_accounts {
if is_service_enabled designate-api; then
create_service_user "designate"
if [[ "$KEYSTONE_CATALOG_BACKEND" = 'sql' ]]; then
get_or_create_service "designate" "dns" "Designate DNS Service"
get_or_create_endpoint "dns" \
"$REGION_NAME" \
"$DESIGNATE_SERVICE_PROTOCOL://$DESIGNATE_SERVICE_HOST:$DESIGNATE_SERVICE_PORT/" \
"$DESIGNATE_SERVICE_PROTOCOL://$DESIGNATE_SERVICE_HOST:$DESIGNATE_SERVICE_PORT/" \
"$DESIGNATE_SERVICE_PROTOCOL://$DESIGNATE_SERVICE_HOST:$DESIGNATE_SERVICE_PORT/"
fi
fi
}
# create_designate_pool_configuration - Create Pool Configuration
function create_designate_pool_configuration {
# Sync Pools Config
designate-manage pool update --file $DESIGNATE_CONF_DIR/pools.yaml
# Allow Backends to do backend specific tasks
if function_exists create_designate_pool_configuration_backend; then
create_designate_pool_configuration_backend
fi
}
# init_designate - Initialize etc.
function init_designate {
# Create cache dir
sudo mkdir -p $DESIGNATE_AUTH_CACHE_DIR
sudo chown $STACK_USER $DESIGNATE_AUTH_CACHE_DIR
rm -f $DESIGNATE_AUTH_CACHE_DIR/*
# Some Designate Backends require mdns be bound to port 53, make that
# doable.
sudo setcap 'cap_net_bind_service=+ep' $(readlink -f /usr/bin/python)
# (Re)create designate database
recreate_database designate utf8
# Init and migrate designate database
designate-manage database sync
if [ "$DESIGNATE_POOL_MANAGER_CACHE_DRIVER" == "sqlalchemy" ]; then
# (Re)create designate_pool_manager cache
recreate_database designate_pool_manager utf8
# Init and migrate designate pool-manager-cache
designate-manage pool-manager-cache sync
fi
init_designate_backend
}
# install_designate - Collect source and prepare
function install_designate {
install_package libcap2-bin
if is_fedora; then
# This package provides `dig`
install_package bind-utils
fi
git_clone $DESIGNATE_REPO $DESIGNATE_DIR $DESIGNATE_BRANCH
setup_develop $DESIGNATE_DIR
install_designate_backend
}
# install_designateclient - Collect source and prepare
function install_designateclient {
if use_library_from_git "python-designateclient"; then
git_clone_by_name "python-designateclient"
setup_dev_lib "python-designateclient"
else
pip_install_gr "python-designateclient"
fi
}
# install_designatedashboard - Collect source and prepare
function install_designatedashboard {
git_clone $DESIGNATEDASHBOARD_REPO $DESIGNATEDASHBOARD_DIR $DESIGNATEDASHBOARD_BRANCH
setup_develop $DESIGNATEDASHBOARD_DIR
ln -fs $DESIGNATEDASHBOARD_DIR/designatedashboard/enabled/_1710_project_dns_panel_group.py $HORIZON_DIR/openstack_dashboard/local/enabled/_1710_project_dns_panel_group.py
ln -fs $DESIGNATEDASHBOARD_DIR/designatedashboard/enabled/_1720_project_dns_panel.py $HORIZON_DIR/openstack_dashboard/local/enabled/_1720_project_dns_panel.py
}
# start_designate - Start running processes, including screen
function start_designate {
start_designate_backend
run_process designate-central "$DESIGNATE_BIN_DIR/designate-central --config-file $DESIGNATE_CONF"
run_process designate-api "$DESIGNATE_BIN_DIR/designate-api --config-file $DESIGNATE_CONF"
run_process designate-pool-manager "$DESIGNATE_BIN_DIR/designate-pool-manager --config-file $DESIGNATE_CONF"
run_process designate-zone-manager "$DESIGNATE_BIN_DIR/designate-zone-manager --config-file $DESIGNATE_CONF"
run_process designate-mdns "$DESIGNATE_BIN_DIR/designate-mdns --config-file $DESIGNATE_CONF"
run_process designate-agent "$DESIGNATE_BIN_DIR/designate-agent --config-file $DESIGNATE_CONF"
run_process designate-sink "$DESIGNATE_BIN_DIR/designate-sink --config-file $DESIGNATE_CONF"
# Start proxies if enabled
if is_service_enabled designate-api && is_service_enabled tls-proxy; then
start_tls_proxy '*' $DESIGNATE_SERVICE_PORT $DESIGNATE_SERVICE_HOST $DESIGNATE_SERVICE_PORT_INT &
fi
if ! timeout $SERVICE_TIMEOUT sh -c "while ! wget --no-proxy -q -O- $DESIGNATE_SERVICE_PROTOCOL://$DESIGNATE_SERVICE_HOST:$DESIGNATE_SERVICE_PORT; do sleep 1; done"; then
die $LINENO "Designate did not start"
fi
}
# stop_designate - Stop running processes
function stop_designate {
# Kill the designate screen windows
stop_process designate-central
stop_process designate-api
stop_process designate-pool-manager
stop_process designate-zone-manager
stop_process designate-mdns
stop_process designate-agent
stop_process designate-sink
stop_designate_backend
}
# This is the main for plugin.sh
if is_service_enabled designate; then
if [[ "$1" == "stack" && "$2" == "install" ]]; then
echo_summary "Installing Designate client"
install_designateclient
echo_summary "Installing Designate"
install_designate
if is_service_enabled horizon; then
echo_summary "Installing Designate dashboard"
install_designatedashboard
fi
elif [[ "$1" == "stack" && "$2" == "post-config" ]]; then
echo_summary "Configuring Designate"
configure_designate
if is_service_enabled horizon; then
echo_summary "Configuring Designate dashboard"
configure_designatedashboard
fi
if is_service_enabled key; then
echo_summary "Creating Designate Keystone accounts"
create_designate_accounts
fi
elif [[ "$1" == "stack" && "$2" == "extra" ]]; then
echo_summary "Initializing Designate"
init_designate
echo_summary "Configuring Tempest options for Designate"
configure_designate_tempest
echo_summary "Starting Designate"
start_designate
echo_summary "Creating Pool Configuration"
create_designate_pool_configuration
fi
if [[ "$1" == "unstack" ]]; then
stop_designate
fi
if [[ "$1" == "clean" ]]; then
echo_summary "Cleaning Designate"
cleanup_designate
fi
fi
# Restore xtrace
$XTRACE