#!/bin/bash # # lib/tempest # Install and configure Tempest # Dependencies: # # - ``functions`` file # - ``lib/nova`` service is running # - Global vars that are assumed to be defined: # - ``DEST``, ``FILES`` # - ``ADMIN_PASSWORD`` # - ``DEFAULT_IMAGE_NAME`` # - ``DEFAULT_IMAGE_FILE_NAME`` # - ``S3_SERVICE_PORT`` # - ``SERVICE_HOST`` # - ``BASE_SQL_CONN`` ``lib/database`` declares # - ``PUBLIC_NETWORK_NAME`` # - ``VIRT_DRIVER`` # - ``LIBVIRT_TYPE`` # - ``KEYSTONE_SERVICE_URI``, ``KEYSTONE_SERVICE_URI_V3`` from lib/keystone # # Optional Dependencies: # # - ``ALT_*`` # - ``LIVE_MIGRATION_AVAILABLE`` # - ``USE_BLOCK_MIGRATION_FOR_LIVE_MIGRATION`` # - ``DEFAULT_INSTANCE_TYPE`` # - ``DEFAULT_INSTANCE_USER`` # - ``CINDER_ENABLED_BACKENDS`` # - ``NOVA_ALLOW_DUPLICATE_NETWORKS`` # # ``stack.sh`` calls the entry points in this order: # # - install_tempest # - configure_tempest # Save trace setting _XTRACE_TEMPEST=$(set +o | grep xtrace) set +o xtrace # Defaults # -------- # Set up default directories TEMPEST_DIR=$DEST/tempest TEMPEST_CONFIG_DIR=${TEMPEST_CONFIG_DIR:-$TEMPEST_DIR/etc} TEMPEST_CONFIG=$TEMPEST_CONFIG_DIR/tempest.conf TEMPEST_STATE_PATH=${TEMPEST_STATE_PATH:=$DATA_DIR/tempest} # This is the timeout that tempest will wait for a VM to change state, # spawn, delete, etc. # The default is set to 196 seconds. BUILD_TIMEOUT=${BUILD_TIMEOUT:-196} # This must be False on stable branches, as master tempest # deps do not match stable branch deps. Set this to True to # have tempest installed in DevStack by default. INSTALL_TEMPEST=${INSTALL_TEMPEST:-"True"} # This variable is passed directly to pip install inside the common tox venv # that is created TEMPEST_PLUGINS=${TEMPEST_PLUGINS:-0} # Cinder/Volume variables TEMPEST_VOLUME_DRIVER=${TEMPEST_VOLUME_DRIVER:-default} TEMPEST_DEFAULT_VOLUME_VENDOR="Open Source" TEMPEST_VOLUME_VENDOR=${TEMPEST_VOLUME_VENDOR:-$TEMPEST_DEFAULT_VOLUME_VENDOR} TEMPEST_DEFAULT_STORAGE_PROTOCOL="iSCSI" TEMPEST_STORAGE_PROTOCOL=${TEMPEST_STORAGE_PROTOCOL:-$TEMPEST_DEFAULT_STORAGE_PROTOCOL} # Neutron/Network variables IPV6_ENABLED=$(trueorfalse True IPV6_ENABLED) IPV6_SUBNET_ATTRIBUTES_ENABLED=$(trueorfalse True IPV6_SUBNET_ATTRIBUTES_ENABLED) # Do we want to make a configuration where Tempest has admin on # the cloud. We don't always want to so that we can ensure Tempest # would work on a public cloud. TEMPEST_HAS_ADMIN=$(trueorfalse True TEMPEST_HAS_ADMIN) # Credential provider configuration option variables TEMPEST_ALLOW_TENANT_ISOLATION=${TEMPEST_ALLOW_TENANT_ISOLATION:-$TEMPEST_HAS_ADMIN} TEMPEST_USE_TEST_ACCOUNTS=$(trueorfalse False TEMPEST_USE_TEST_ACCOUNTS) # The number of workers tempest is expected to be run with. This is used for # generating a accounts.yaml for running with test-accounts. This is also the # same variable that devstack-gate uses to specify the number of workers that # it will run tempest with TEMPEST_CONCURRENCY=${TEMPEST_CONCURRENCY:-$(nproc)} # Functions # --------- # remove_disabled_extension - removes disabled extensions from the list of extensions # to test for a given service function remove_disabled_extensions { local extensions_list=$1 shift local disabled_exts=$* remove_disabled_services "$extensions_list" "$disabled_exts" } # image_size_in_gib - converts an image size from bytes to GiB, rounded up # Takes an image ID parameter as input function image_size_in_gib { local size size=$(openstack image show $1 -c size -f value) echo $size | python3 -c "import math; print(int(math.ceil(float(int(input()) / 1024.0 ** 3))))" } # configure_tempest() - Set config files, create data dirs, etc function configure_tempest { if [[ "$INSTALL_TEMPEST" == "True" ]]; then setup_develop $TEMPEST_DIR else # install testr since its used to process tempest logs pip_install_gr testrepository fi local image_lines local images local num_images local image_uuid local image_uuid_alt local password local line local flavors local available_flavors local flavors_ref local flavor_lines local flavor_ref_size local flavor_ref_alt_size local public_network_id local public_router_id local ssh_connect_method="floating" local disk # Save IFS ifs=$IFS # Glance should already contain images to be used in tempest # testing. Here we simply look for images stored in Glance # and set the appropriate variables for use in the tempest config # We ignore ramdisk and kernel images, look for the default image # ``DEFAULT_IMAGE_NAME``. If not found, we set the ``image_uuid`` to the # first image returned and set ``image_uuid_alt`` to the second, # if there is more than one returned... # ... Also ensure we only take active images, so we don't get snapshots in process declare -a images if is_service_enabled glance; then while read -r IMAGE_NAME IMAGE_UUID; do if [ "$IMAGE_NAME" = "$DEFAULT_IMAGE_NAME" ]; then image_uuid="$IMAGE_UUID" image_uuid_alt="$IMAGE_UUID" fi images+=($IMAGE_UUID) done < <(openstack image list --property status=active | awk -F'|' '!/^(+--)|ID|aki|ari/ { print $3,$2 }') case "${#images[*]}" in 0) echo "Found no valid images to use!" exit 1 ;; 1) if [ -z "$image_uuid" ]; then image_uuid=${images[0]} image_uuid_alt=${images[0]} fi ;; *) if [ -z "$image_uuid" ]; then image_uuid=${images[0]} image_uuid_alt=${images[1]} fi ;; esac fi # (Re)create ``tempest.conf`` # Create every time because the image UUIDS are going to change sudo install -d -o $STACK_USER $TEMPEST_CONFIG_DIR rm -f $TEMPEST_CONFIG local password=${ADMIN_PASSWORD:-secret} # See ``lib/keystone`` where these users and tenants are set up local admin_username=${ADMIN_USERNAME:-admin} local admin_project_name=${ADMIN_TENANT_NAME:-admin} local admin_domain_name=${ADMIN_DOMAIN_NAME:-Default} local alt_username=${ALT_USERNAME:-alt_demo} local alt_project_name=${ALT_TENANT_NAME:-alt_demo} local admin_project_id admin_project_id=$(openstack project list | awk "/ admin / { print \$2 }") if is_service_enabled nova; then # If ``DEFAULT_INSTANCE_TYPE`` is not declared, use the new behavior # Tempest creates its own instance types available_flavors=$(nova flavor-list) if [[ -z "$DEFAULT_INSTANCE_TYPE" ]]; then if [[ ! ( $available_flavors =~ 'm1.nano' ) ]]; then # Determine the flavor disk size based on the image size. disk=$(image_size_in_gib $image_uuid) openstack flavor create --id 42 --ram 128 --disk $disk --vcpus 1 --property hw_rng:allowed=True m1.nano fi flavor_ref=42 if [[ ! ( $available_flavors =~ 'm1.micro' ) ]]; then # Determine the alt flavor disk size based on the alt image size. disk=$(image_size_in_gib $image_uuid_alt) openstack flavor create --id 84 --ram 192 --disk $disk --vcpus 1 --property hw_rng:allowed=True m1.micro fi flavor_ref_alt=84 else # Check Nova for existing flavors, if ``DEFAULT_INSTANCE_TYPE`` is set use it. IFS=$'\r\n' flavors="" for line in $available_flavors; do f=$(echo $line | awk "/ $DEFAULT_INSTANCE_TYPE / { print \$2 }") flavors="$flavors $f" done for line in $available_flavors; do flavors="$flavors `echo $line | grep -v "^\(|\s*ID\|+--\)" | cut -d' ' -f2`" done IFS=" " flavors=($flavors) num_flavors=${#flavors[*]} echo "Found $num_flavors flavors" if [[ $num_flavors -eq 0 ]]; then echo "Found no valid flavors to use!" exit 1 fi flavor_ref=${flavors[0]} flavor_ref_alt=$flavor_ref flavor_ref_size=$(openstack flavor show --format value --column disk "${flavor_ref}") # Ensure ``flavor_ref`` and ``flavor_ref_alt`` have different values. # Some resize instance in tempest tests depends on this. for f in ${flavors[@]:1}; do if [[ "$f" != "$flavor_ref" ]]; then # # NOTE(sdatko): Resize is only possible when target flavor # is not smaller than the original one. For # Tempest tests, in case there was a bigger # flavor selected as default, e.g. m1.small, # we need to perform additional check. # flavor_ref_alt_size=$(openstack flavor show --format value --column disk "${f}") if [[ "${flavor_ref_alt_size}" -lt "${flavor_ref_size}" ]]; then continue fi flavor_ref_alt=$f break fi done fi fi iniset $TEMPEST_CONFIG network project_network_cidr $FIXED_RANGE ssh_connect_method=${TEMPEST_SSH_CONNECT_METHOD:-$ssh_connect_method} # the public network (for floating ip access) is only available # if the extension is enabled. # If NEUTRON_CREATE_INITIAL_NETWORKS is not true, there is no network created # and the public_network_id should not be set. if [[ "$NEUTRON_CREATE_INITIAL_NETWORKS" == "True" ]] && is_networking_extension_supported 'external-net'; then public_network_id=$(openstack network show -f value -c id $PUBLIC_NETWORK_NAME) # make sure shared network presence does not confuses the tempest tests openstack network create --share shared openstack subnet create --description shared-subnet --subnet-range ${TEMPEST_SHARED_POOL:-192.168.233.0/24} --network shared shared-subnet fi iniset $TEMPEST_CONFIG DEFAULT use_syslog $SYSLOG # Oslo iniset $TEMPEST_CONFIG oslo_concurrency lock_path $TEMPEST_STATE_PATH mkdir -p $TEMPEST_STATE_PATH iniset $TEMPEST_CONFIG DEFAULT use_stderr False iniset $TEMPEST_CONFIG DEFAULT log_file tempest.log iniset $TEMPEST_CONFIG DEFAULT debug True # Timeouts iniset $TEMPEST_CONFIG compute build_timeout $BUILD_TIMEOUT iniset $TEMPEST_CONFIG volume build_timeout $BUILD_TIMEOUT # Identity iniset $TEMPEST_CONFIG identity uri "$KEYSTONE_SERVICE_URI/v2.0/" iniset $TEMPEST_CONFIG identity uri_v3 "$KEYSTONE_SERVICE_URI_V3" iniset $TEMPEST_CONFIG identity user_lockout_failure_attempts $KEYSTONE_LOCKOUT_FAILURE_ATTEMPTS iniset $TEMPEST_CONFIG identity user_lockout_duration $KEYSTONE_LOCKOUT_DURATION iniset $TEMPEST_CONFIG identity user_unique_last_password_count $KEYSTONE_UNIQUE_LAST_PASSWORD_COUNT if [[ "$TEMPEST_HAS_ADMIN" == "True" ]]; then iniset $TEMPEST_CONFIG auth admin_username $admin_username iniset $TEMPEST_CONFIG auth admin_password "$password" iniset $TEMPEST_CONFIG auth admin_project_name $admin_project_name iniset $TEMPEST_CONFIG auth admin_domain_name $admin_domain_name fi if [ "$ENABLE_IDENTITY_V2" == "True" ]; then # Run Identity API v2 tests ONLY if needed iniset $TEMPEST_CONFIG identity-feature-enabled api_v2 True else # Skip Identity API v2 tests by default iniset $TEMPEST_CONFIG identity-feature-enabled api_v2 False fi iniset $TEMPEST_CONFIG identity auth_version ${TEMPEST_AUTH_VERSION:-v3} if [[ "$TEMPEST_AUTH_VERSION" != "v2" ]]; then # we're going to disable v2 admin unless we're using v2 by default. iniset $TEMPEST_CONFIG identity-feature-enabled api_v2_admin False fi if is_service_enabled tls-proxy; then iniset $TEMPEST_CONFIG identity ca_certificates_file $SSL_BUNDLE_FILE fi # Identity Features if [[ "$KEYSTONE_SECURITY_COMPLIANCE_ENABLED" = True ]]; then iniset $TEMPEST_CONFIG identity-feature-enabled security_compliance True fi # When LDAP is enabled domain specific drivers are also enabled and the users # and groups identity tests must adapt to this scenario if is_service_enabled ldap; then iniset $TEMPEST_CONFIG identity-feature-enabled domain_specific_drivers True fi # TODO(felipemonteiro): Remove this once Tempest no longer supports Pike # as this is supported in Queens and beyond. iniset $TEMPEST_CONFIG identity-feature-enabled project_tags True # In Queens and later, application credentials are enabled by default # so remove this once Tempest no longer supports Pike. iniset $TEMPEST_CONFIG identity-feature-enabled application_credentials True # Image # We want to be able to override this variable in the gate to avoid # doing an external HTTP fetch for this test. if [[ ! -z "$TEMPEST_HTTP_IMAGE" ]]; then iniset $TEMPEST_CONFIG image http_image $TEMPEST_HTTP_IMAGE fi if [ "$VIRT_DRIVER" = "xenserver" ]; then iniset $TEMPEST_CONFIG image disk_formats "ami,ari,aki,vhd,raw,iso" fi # Image Features if [ "$GLANCE_V1_ENABLED" != "True" ]; then iniset $TEMPEST_CONFIG image-feature-enabled api_v1 False fi # Compute iniset $TEMPEST_CONFIG compute image_ref $image_uuid iniset $TEMPEST_CONFIG compute image_ref_alt $image_uuid_alt iniset $TEMPEST_CONFIG compute flavor_ref $flavor_ref iniset $TEMPEST_CONFIG compute flavor_ref_alt $flavor_ref_alt iniset $TEMPEST_CONFIG validation connect_method $ssh_connect_method if ! is_service_enabled neutron; then iniset $TEMPEST_CONFIG compute fixed_network_name $PRIVATE_NETWORK_NAME fi # Set the service catalog entry for Tempest to run on. Typically # used to try different compute API version targets. The tempest # default if 'compute', which is typically valid, so only set this # if you want to change it. if [[ -n "$TEMPEST_COMPUTE_TYPE" ]]; then iniset $TEMPEST_CONFIG compute catalog_type $TEMPEST_COMPUTE_TYPE fi # Compute Features # Set the microversion range for compute tests. # This is used to run the Nova microversions tests. # Setting [None, latest] range of microversion which allow Tempest to run all microversions tests. # NOTE- To avoid microversion tests failure on stable branch, we need to change "tempest_compute_max_microversion" # for stable branch on each release which should be changed from "latest" to max supported version of that release. local tempest_compute_min_microversion=${TEMPEST_COMPUTE_MIN_MICROVERSION:-None} local tempest_compute_max_microversion=${TEMPEST_COMPUTE_MAX_MICROVERSION:-"latest"} # Reset microversions to None where v2.0 is running which does not support microversion. # Both "None" means no microversion testing. if [[ "$TEMPEST_COMPUTE_TYPE" == "compute_legacy" ]]; then tempest_compute_min_microversion=None tempest_compute_max_microversion=None fi if [ "$tempest_compute_min_microversion" == "None" ]; then inicomment $TEMPEST_CONFIG compute min_microversion else iniset $TEMPEST_CONFIG compute min_microversion $tempest_compute_min_microversion fi if [ "$tempest_compute_max_microversion" == "None" ]; then inicomment $TEMPEST_CONFIG compute max_microversion else iniset $TEMPEST_CONFIG compute max_microversion $tempest_compute_max_microversion fi iniset $TEMPEST_CONFIG compute-feature-enabled personality ${ENABLE_FILE_INJECTION:-False} iniset $TEMPEST_CONFIG compute-feature-enabled resize True iniset $TEMPEST_CONFIG compute-feature-enabled live_migration ${LIVE_MIGRATION_AVAILABLE:-False} iniset $TEMPEST_CONFIG compute-feature-enabled change_password False iniset $TEMPEST_CONFIG compute-feature-enabled block_migration_for_live_migration ${USE_BLOCK_MIGRATION_FOR_LIVE_MIGRATION:-False} iniset $TEMPEST_CONFIG compute-feature-enabled live_migrate_back_and_forth ${LIVE_MIGRATE_BACK_AND_FORTH:-False} iniset $TEMPEST_CONFIG compute-feature-enabled attach_encrypted_volume ${ATTACH_ENCRYPTED_VOLUME_AVAILABLE:-True} if [[ -n "$NOVA_FILTERS" ]]; then iniset $TEMPEST_CONFIG compute-feature-enabled scheduler_enabled_filters ${NOVA_FILTERS} fi if [[ $ENABLE_VOLUME_MULTIATTACH == "True" ]]; then iniset $TEMPEST_CONFIG compute-feature-enabled volume_multiattach True fi if is_service_enabled n-novnc; then iniset $TEMPEST_CONFIG compute-feature-enabled vnc_console True fi # Network iniset $TEMPEST_CONFIG network project_networks_reachable false iniset $TEMPEST_CONFIG network public_network_id "$public_network_id" iniset $TEMPEST_CONFIG network public_router_id "$public_router_id" iniset $TEMPEST_CONFIG network default_network "$FIXED_RANGE" iniset $TEMPEST_CONFIG network-feature-enabled ipv6 "$IPV6_ENABLED" iniset $TEMPEST_CONFIG network-feature-enabled ipv6_subnet_attributes "$IPV6_SUBNET_ATTRIBUTES_ENABLED" iniset $TEMPEST_CONFIG network-feature-enabled port_security $NEUTRON_PORT_SECURITY # Scenario if [ "$VIRT_DRIVER" = "xenserver" ]; then SCENARIO_IMAGE_DIR=${SCENARIO_IMAGE_DIR:-$FILES} SCENARIO_IMAGE_FILE="cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-disk.vhd.tgz" iniset $TEMPEST_CONFIG scenario img_disk_format vhd iniset $TEMPEST_CONFIG scenario img_container_format ovf else SCENARIO_IMAGE_DIR=${SCENARIO_IMAGE_DIR:-$FILES} SCENARIO_IMAGE_FILE=$DEFAULT_IMAGE_FILE_NAME fi iniset $TEMPEST_CONFIG scenario img_dir $SCENARIO_IMAGE_DIR iniset $TEMPEST_CONFIG scenario img_file $SCENARIO_IMAGE_FILE # If using provider networking, use the physical network for validation rather than private TEMPEST_SSH_NETWORK_NAME=$PRIVATE_NETWORK_NAME if is_provider_network; then TEMPEST_SSH_NETWORK_NAME=$PHYSICAL_NETWORK fi # Validation iniset $TEMPEST_CONFIG validation run_validation ${TEMPEST_RUN_VALIDATION:-True} iniset $TEMPEST_CONFIG validation ip_version_for_ssh 4 iniset $TEMPEST_CONFIG validation ssh_timeout $BUILD_TIMEOUT iniset $TEMPEST_CONFIG validation image_ssh_user ${DEFAULT_INSTANCE_USER:-cirros} iniset $TEMPEST_CONFIG validation network_for_ssh $TEMPEST_SSH_NETWORK_NAME # Volume # Set the service catalog entry for Tempest to run on. Typically # used to try different Volume API version targets. The tempest # default it to 'volumev3'(v3 APIs endpoint) , so only set this # if you want to change it. if [[ -n "$TEMPEST_VOLUME_TYPE" ]]; then iniset $TEMPEST_CONFIG volume catalog_type $TEMPEST_VOLUME_TYPE fi # Only turn on TEMPEST_VOLUME_MANAGE_SNAPSHOT by default for "lvm" backends if [[ "$CINDER_ENABLED_BACKENDS" == *"lvm"* ]]; then TEMPEST_VOLUME_MANAGE_SNAPSHOT=${TEMPEST_VOLUME_MANAGE_SNAPSHOT:-True} fi iniset $TEMPEST_CONFIG volume-feature-enabled manage_snapshot $(trueorfalse False TEMPEST_VOLUME_MANAGE_SNAPSHOT) # Only turn on TEMPEST_VOLUME_MANAGE_VOLUME by default for "lvm" backends if [[ "$CINDER_ENABLED_BACKENDS" == *"lvm"* ]]; then TEMPEST_VOLUME_MANAGE_VOLUME=${TEMPEST_VOLUME_MANAGE_VOLUME:-True} fi iniset $TEMPEST_CONFIG volume-feature-enabled manage_volume $(trueorfalse False TEMPEST_VOLUME_MANAGE_VOLUME) # Only turn on TEMPEST_EXTEND_ATTACHED_VOLUME by default for "lvm" backends # in Cinder and the libvirt driver in Nova. if [[ "$CINDER_ENABLED_BACKENDS" == *"lvm"* ]] && [ "$VIRT_DRIVER" = "libvirt" ]; then TEMPEST_EXTEND_ATTACHED_VOLUME=${TEMPEST_EXTEND_ATTACHED_VOLUME:-True} fi iniset $TEMPEST_CONFIG volume-feature-enabled extend_attached_volume $(trueorfalse False TEMPEST_EXTEND_ATTACHED_VOLUME) # Only turn on TEMPEST_VOLUME_REVERT_TO_SNAPSHOT by default for "lvm" backends if [[ "$CINDER_ENABLED_BACKENDS" == *"lvm"* ]]; then TEMPEST_VOLUME_REVERT_TO_SNAPSHOT=${TEMPEST_VOLUME_REVERT_TO_SNAPSHOT:-True} fi iniset $TEMPEST_CONFIG volume-feature-enabled volume_revert $(trueorfalse False TEMPEST_VOLUME_REVERT_TO_SNAPSHOT) local tempest_volume_min_microversion=${TEMPEST_VOLUME_MIN_MICROVERSION:-None} local tempest_volume_max_microversion=${TEMPEST_VOLUME_MAX_MICROVERSION:-"latest"} # Reset microversions to None where v2 is running which does not support microversion. # Both "None" means no microversion testing. if [[ "$TEMPEST_VOLUME_TYPE" == "volumev2" ]]; then tempest_volume_min_microversion=None tempest_volume_max_microversion=None fi if [ "$tempest_volume_min_microversion" == "None" ]; then inicomment $TEMPEST_CONFIG volume min_microversion else iniset $TEMPEST_CONFIG volume min_microversion $tempest_volume_min_microversion fi if [ "$tempest_volume_max_microversion" == "None" ]; then inicomment $TEMPEST_CONFIG volume max_microversion else iniset $TEMPEST_CONFIG volume max_microversion $tempest_volume_max_microversion fi if ! is_service_enabled c-bak; then iniset $TEMPEST_CONFIG volume-feature-enabled backup False fi # Using ``CINDER_ENABLED_BACKENDS`` # Cinder uses a comma separated list with "type:backend_name": # CINDER_ENABLED_BACKENDS = ceph:cephBE1,lvm:lvmBE2,foo:my_foo if [[ -n "$CINDER_ENABLED_BACKENDS" ]] && [[ $CINDER_ENABLED_BACKENDS =~ .*,.* ]]; then # We have at least 2 backends iniset $TEMPEST_CONFIG volume-feature-enabled multi_backend "True" local add_comma_seperator=0 local backends_list='' local be # Tempest uses a comma separated list of backend_names: # backend_names = BACKEND_1,BACKEND_2 for be in ${CINDER_ENABLED_BACKENDS//,/ }; do if [ "$add_comma_seperator" -eq "1" ]; then backends_list+=,${be##*:} else # first element in the list backends_list+=${be##*:} add_comma_seperator=1 fi done iniset $TEMPEST_CONFIG volume "backend_names" "$backends_list" fi if [ $TEMPEST_VOLUME_DRIVER != "default" -o \ "$TEMPEST_VOLUME_VENDOR" != "$TEMPEST_DEFAULT_VOLUME_VENDOR" ]; then iniset $TEMPEST_CONFIG volume vendor_name "$TEMPEST_VOLUME_VENDOR" fi if [ $TEMPEST_VOLUME_DRIVER != "default" -o \ "$TEMPEST_STORAGE_PROTOCOL" != "$TEMPEST_DEFAULT_STORAGE_PROTOCOL" ]; then iniset $TEMPEST_CONFIG volume storage_protocol "$TEMPEST_STORAGE_PROTOCOL" fi # Placement Features # Set the microversion range for placement. # Setting [None, latest] range of microversion which allow Tempest to run all microversions tests. # NOTE- To avoid microversion tests failure on stable branch, we need to change "tempest_placement_max_microversion" # for stable branch on each release which should be changed from "latest" to max supported version of that release. local tempest_placement_min_microversion=${TEMPEST_PLACEMENT_MIN_MICROVERSION:-None} local tempest_placement_max_microversion=${TEMPEST_PLACEMENT_MAX_MICROVERSION:-"latest"} if [ "$tempest_placement_min_microversion" == "None" ]; then inicomment $TEMPEST_CONFIG placement min_microversion else iniset $TEMPEST_CONFIG placement min_microversion $tempest_placement_min_microversion fi if [ "$tempest_placement_max_microversion" == "None" ]; then inicomment $TEMPEST_CONFIG placement max_microversion else iniset $TEMPEST_CONFIG placement max_microversion $tempest_placement_max_microversion fi # Baremetal if [ "$VIRT_DRIVER" = "ironic" ] ; then iniset $TEMPEST_CONFIG compute-feature-enabled change_password False iniset $TEMPEST_CONFIG compute-feature-enabled console_output False iniset $TEMPEST_CONFIG compute-feature-enabled interface_attach False iniset $TEMPEST_CONFIG compute-feature-enabled live_migration False iniset $TEMPEST_CONFIG compute-feature-enabled pause False iniset $TEMPEST_CONFIG compute-feature-enabled rescue False iniset $TEMPEST_CONFIG compute-feature-enabled resize False iniset $TEMPEST_CONFIG compute-feature-enabled shelve False iniset $TEMPEST_CONFIG compute-feature-enabled snapshot False iniset $TEMPEST_CONFIG compute-feature-enabled suspend False fi # Libvirt if [ "$VIRT_DRIVER" = "libvirt" ]; then # Libvirt-LXC if [ "$LIBVIRT_TYPE" = "lxc" ]; then iniset $TEMPEST_CONFIG compute-feature-enabled rescue False iniset $TEMPEST_CONFIG compute-feature-enabled resize False iniset $TEMPEST_CONFIG compute-feature-enabled shelve False iniset $TEMPEST_CONFIG compute-feature-enabled snapshot False iniset $TEMPEST_CONFIG compute-feature-enabled suspend False else iniset $TEMPEST_CONFIG compute-feature-enabled stable_rescue True iniset $TEMPEST_CONFIG compute-feature-enabled swap_volume True fi fi # ``service_available`` # # this tempest service list needs to be the services that # tempest own, otherwise we can have an erroneous set of # defaults (something defaulting true in Tempest, but not listed here). # services tested by tempest plugins needs to be set on service devstack # plugin side as devstack cannot keep track of all the tempest plugins # services. Refer Bug#1743688 for more details. # 'horizon' is also kept here as no devtack plugin for horizon. local service local tempest_services="key,glance,nova,neutron,cinder,swift,horizon" for service in ${tempest_services//,/ }; do if is_service_enabled $service ; then iniset $TEMPEST_CONFIG service_available $service "True" else iniset $TEMPEST_CONFIG service_available $service "False" fi done if [ "$VIRT_DRIVER" = "libvirt" ] && [ "$LIBVIRT_TYPE" = "lxc" ]; then # libvirt-lxc does not support boot from volume or attaching volumes # so basically anything with cinder is out of the question. iniset $TEMPEST_CONFIG service_available cinder "False" fi # Run tempest configuration utilities. This must be done last during configuration to # ensure as complete a config as possible already exists # NOTE(mtreinish): Respect constraints on tempest verify-config venv local tmp_cfg_file tmp_cfg_file=$(mktemp) cd $TEMPEST_DIR if [[ "$OFFLINE" != "True" ]]; then tox -revenv-tempest --notest fi # The requirements might be on a different branch, while tempest needs master requirements. local tmp_u_c_m tmp_u_c_m=$(mktemp -t tempest_u_c_m.XXXXXXXXXX) (cd $REQUIREMENTS_DIR && git show origin/master:upper-constraints.txt) > $tmp_u_c_m tox -evenv-tempest -- pip install -c $tmp_u_c_m -r requirements.txt rm -f $tmp_u_c_m # Auth: iniset $TEMPEST_CONFIG auth tempest_roles "member" if [[ $TEMPEST_USE_TEST_ACCOUNTS == "True" ]]; then if [[ $TEMPEST_HAS_ADMIN == "True" ]]; then tox -evenv-tempest -- tempest account-generator -c $TEMPEST_CONFIG --os-username $admin_username --os-password "$password" --os-project-name $admin_project_name -r $TEMPEST_CONCURRENCY --with-admin etc/accounts.yaml else tox -evenv-tempest -- tempest account-generator -c $TEMPEST_CONFIG --os-username $admin_username --os-password "$password" --os-project-name $admin_project_name -r $TEMPEST_CONCURRENCY etc/accounts.yaml fi iniset $TEMPEST_CONFIG auth use_dynamic_credentials False iniset $TEMPEST_CONFIG auth test_accounts_file "etc/accounts.yaml" elif [[ $TEMPEST_HAS_ADMIN == "False" ]]; then iniset $TEMPEST_CONFIG auth use_dynamic_credentials ${TEMPEST_ALLOW_TENANT_ISOLATION:-False} else iniset $TEMPEST_CONFIG auth use_dynamic_credentials ${TEMPEST_ALLOW_TENANT_ISOLATION:-True} fi # API Extensions # Run ``verify_tempest_config -ur`` to retrieve enabled extensions on API endpoints # NOTE(mtreinish): This must be done after auth settings are added to the tempest config tox -evenv -- tempest verify-config -uro $tmp_cfg_file # Neutron API Extensions # disable metering if we didn't enable the service if ! is_service_enabled q-metering; then DISABLE_NETWORK_API_EXTENSIONS+=", metering" fi # disable l3_agent_scheduler if we didn't enable L3 agent if ! is_service_enabled q-l3; then DISABLE_NETWORK_API_EXTENSIONS+=", l3_agent_scheduler" fi local network_api_extensions=${NETWORK_API_EXTENSIONS:-"all"} if [[ ! -z "$DISABLE_NETWORK_API_EXTENSIONS" ]]; then # Enabled extensions are either the ones explicitly specified or those available on the API endpoint network_api_extensions=${NETWORK_API_EXTENSIONS:-$(iniget $tmp_cfg_file network-feature-enabled api_extensions | tr -d " ")} # Remove disabled extensions network_api_extensions=$(remove_disabled_extensions $network_api_extensions $DISABLE_NETWORK_API_EXTENSIONS) fi if [[ -n "$ADDITIONAL_NETWORK_API_EXTENSIONS" ]] && [[ "$network_api_extensions" != "all" ]]; then network_api_extensions+=",$ADDITIONAL_NETWORK_API_EXTENSIONS" fi iniset $TEMPEST_CONFIG network-feature-enabled api_extensions $network_api_extensions # Swift API Extensions local object_storage_api_extensions=${OBJECT_STORAGE_API_EXTENSIONS:-"all"} if [[ ! -z "$DISABLE_OBJECT_STORAGE_API_EXTENSIONS" ]]; then # Enabled extensions are either the ones explicitly specified or those available on the API endpoint object_storage_api_extensions=${OBJECT_STORAGE_API_EXTENSIONS:-$(iniget $tmp_cfg_file object-storage-feature-enabled discoverable_apis | tr -d " ")} # Remove disabled extensions object_storage_api_extensions=$(remove_disabled_extensions $object_storage_api_extensions $DISABLE_STORAGE_API_EXTENSIONS) fi iniset $TEMPEST_CONFIG object-storage-feature-enabled discoverable_apis $object_storage_api_extensions # Cinder API Extensions local volume_api_extensions=${VOLUME_API_EXTENSIONS:-"all"} if [[ ! -z "$DISABLE_VOLUME_API_EXTENSIONS" ]]; then # Enabled extensions are either the ones explicitly specified or those available on the API endpoint volume_api_extensions=${VOLUME_API_EXTENSIONS:-$(iniget $tmp_cfg_file volume-feature-enabled api_extensions | tr -d " ")} # Remove disabled extensions volume_api_extensions=$(remove_disabled_extensions $volume_api_extensions $DISABLE_VOLUME_API_EXTENSIONS) fi iniset $TEMPEST_CONFIG volume-feature-enabled api_extensions $volume_api_extensions # Restore IFS IFS=$ifs } # install_tempest() - Collect source and prepare function install_tempest { git_clone $TEMPEST_REPO $TEMPEST_DIR $TEMPEST_BRANCH pip_install 'tox!=2.8.0' pushd $TEMPEST_DIR # NOTE(gmann): checkout the TEMPEST_BRANCH in case TEMPEST_BRANCH # is tag name not master. git_clone would not checkout tag because # TEMPEST_DIR already exist until RECLONE is true. git checkout $TEMPEST_BRANCH tox -r --notest -efull # NOTE(mtreinish) Respect constraints in the tempest full venv, things that # are using a tox job other than full will not be respecting constraints but # running pip install -U on tempest requirements $TEMPEST_DIR/.tox/tempest/bin/pip install -c $REQUIREMENTS_DIR/upper-constraints.txt -r requirements.txt PROJECT_VENV["tempest"]=${TEMPEST_DIR}/.tox/tempest popd } # install_tempest_plugins() - Install any specified plugins into the tempest venv function install_tempest_plugins { pushd $TEMPEST_DIR if [[ $TEMPEST_PLUGINS != 0 ]] ; then # The requirements might be on a different branch, while tempest & tempest plugins needs master requirements. local tmp_u_c_m tmp_u_c_m=$(mktemp -t tempest_u_c_m.XXXXXXXXXX) (cd $REQUIREMENTS_DIR && git show origin/master:upper-constraints.txt) > $tmp_u_c_m tox -evenv-tempest -- pip install -c $tmp_u_c_m $TEMPEST_PLUGINS rm -f $tmp_u_c_m echo "Checking installed Tempest plugins:" tox -evenv-tempest -- tempest list-plugins fi popd } # Restore xtrace $_XTRACE_TEMPEST # Tell emacs to use shell-script-mode ## Local variables: ## mode: shell-script ## End: