From cdb190f01d259772c08d83c491db018d18ffd7bc Mon Sep 17 00:00:00 2001 From: Alexey Stepanov Date: Wed, 9 Mar 2016 13:50:50 +0300 Subject: [PATCH] Python3 code compatibility: tox.ini checks v1 Add pep8-py34/35 (deprecation check & etc). Add pylint with not ignored Python 3 incompatible warnings Add documents test Next: add full py34/35 check after modules compatibility fix blueprint fuel-qa-python3-compatibility Related-bug: #1556791 Change-Id: I65a540aad70bde73043ed36dca222f472f8fe108 --- .pylintrc | 400 ++++++++++++++++++++++++++++++++++++++++++++ .pylintrc_gerrit | 419 +++++++++++++++++++++++++++++++++++++++++++++++ tox.ini | 50 +++++- 3 files changed, 868 insertions(+), 1 deletion(-) create mode 100644 .pylintrc create mode 100644 .pylintrc_gerrit diff --git a/.pylintrc b/.pylintrc new file mode 100644 index 000000000..f59b5f1f3 --- /dev/null +++ b/.pylintrc @@ -0,0 +1,400 @@ +[MASTER] + +# Specify a configuration file. +#rcfile= + +# Python code to execute, usually for sys.path manipulation such as +# pygtk.require(). +#init-hook= + +# Add files or directories to the blacklist. They should be base names, not +# paths. +ignore=CVS, tox, logs + +# Pickle collected data for later comparisons. +persistent=yes + +# List of plugins (as comma separated values of python modules names) to load, +# usually to register additional checkers. +load-plugins= + +# Use multiple processes to speed up Pylint. +jobs=1 + +# Allow loading of arbitrary C extensions. Extensions are imported into the +# active Python interpreter and may run arbitrary code. +unsafe-load-any-extension=no + +# A comma-separated list of package or module names from where C extensions may +# be loaded. Extensions are loading into the active Python interpreter and may +# run arbitrary code +extension-pkg-whitelist= + +# Allow optimization of some AST trees. This will activate a peephole AST +# optimizer, which will apply various small optimizations. For instance, it can +# be used to obtain the result of joining multiple strings with the addition +# operator. Joining a lot of strings can lead to a maximum recursion error in +# Pylint and this flag can prevent that. It has one side effect, the resulting +# AST will be different than the one from reality. +optimize-ast=no + + +[MESSAGES CONTROL] + +# Only show warnings with the listed confidence levels. Leave empty to show +# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED +confidence= + +# Enable the message, report, category or checker with the given id(s). You can +# either give multiple identifier separated by comma (,) or put this option +# multiple time. See also the "--disable" option for examples. +#enable= + +# Disable the message, report, category or checker with the given id(s). You +# can either give multiple identifiers separated by comma (,) or put this +# option multiple times (only on the command line, not in the configuration +# file where it should appear only once).You can also use "--disable=all" to +# disable everything first and then reenable specific checks. For example, if +# you want to run only the similarities checker, you can use "--disable=all +# --enable=similarities". If you want to run only the classes checker, but have +# no Warning level messages displayed, use"--disable=all --enable=classes +# --disable=W" + +# RP0401: External dependencies +# RP0402: Modules dependencies graph +# RP0801: Duplication +# R0801: Duplication + +# deprecated-lambda (W0110) +# bad-builtin (W0141) +# redefined-outer-name (W0621) +# logging-format-interpolation (W1202) +# anomalous-backslash-in-string (W1401) - DO NOT ENABLE, INCORRECTLY PARSES REGEX +# broad-except (W0703) +# no-absolute-import (W1618): +# import missing `from __future__ import absolute_import` Used when an import is not accompanied by from __future__ import absolute_import (default behaviour in Python 3) +# bare-except (W0702) +# cell-var-from-loop (W0640) +# unused-argument (W0613) +# missing-docstring (C0111) +# misplaced-comparison-constant (C0122) +# fixme (W0511) + +disable=RP0401,RP0402,RP0801,R0801,W0110,W0141,suppressed-message,W1618,W0621,W1202,W1401,W0703,W0702,C0111,W0640,C0122,W0511,W0613 + + +[REPORTS] + +# Set the output format. Available formats are text, parseable, colorized, msvs +# (visual studio) and html. You can also give a reporter class, eg +# mypackage.mymodule.MyReporterClass. +output-format=colorized +#output-format=parseable + +# Put messages in a separate file for each module / package specified on the +# command line instead of printing them on stdout. Reports (if any) will be +# written in a file name "pylint_global.[txt|html]". +files-output=no + +# Tells whether to display a full report or only the messages +reports=yes + +# Python expression which should return a note less than 10 (10 is the highest +# note). You have access to the variables errors warning, statement which +# respectively contain the number of errors / warnings messages and the total +# number of statements analyzed. This is used by the global evaluation report +# (RP0004). +evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10) + +# Template used to display messages. This is a python new-style format string +# used to format the message information. See doc for all details +#msg-template= + + +[VARIABLES] + +# Tells whether we should check for unused import in __init__ files. +init-import=no + +# A regular expression matching the name of dummy variables (i.e. expectedly +# not used). +dummy-variables-rgx=_$|dummy + +# List of additional names supposed to be defined in builtins. Remember that +# you should avoid to define new builtins when possible. +additional-builtins= + +# List of strings which can identify a callback function by name. A callback +# name must start or end with one of those strings. +callbacks=cb_,_cb + + +[TYPECHECK] + +# Tells whether missing members accessed in mixin class should be ignored. A +# mixin class is detected if its name ends with "mixin" (case insensitive). +ignore-mixin-members=yes + +# List of module names for which member attributes should not be checked +# (useful for modules/projects where namespaces are manipulated during runtime +# and thus existing member attributes cannot be deduced by static analysis. It +# supports qualified module names, as well as Unix pattern matching. +ignored-modules= + +# List of classes names for which member attributes should not be checked +# (useful for classes with attributes dynamically set). This supports can work +# with qualified names. +ignored-classes= + +# List of members which are set dynamically and missed by pylint inference +# system, and so shouldn't trigger E1101 when accessed. Python regular +# expressions are accepted. +generated-members= + + +[SPELLING] + +# Spelling dictionary name. Available dictionaries: none. To make it working +# install python-enchant package. +spelling-dict= + +# List of comma separated words that should not be checked. +spelling-ignore-words= + +# A path to a file that contains private dictionary; one word per line. +spelling-private-dict-file= + +# Tells whether to store unknown words to indicated private dictionary in +# --spelling-private-dict-file option instead of raising a message. +spelling-store-unknown-words=no + + +[SIMILARITIES] + +# Minimum lines number of a similarity. +min-similarity-lines=10 + +# Ignore comments when computing similarities. +ignore-comments=yes + +# Ignore docstrings when computing similarities. +ignore-docstrings=yes + +# Ignore imports when computing similarities. +ignore-imports=no + + +[MISCELLANEOUS] + +# List of note tags to take in consideration, separated by a comma. +notes=FIXME,XXX,TODO + + +[LOGGING] + +# Logging modules to check that the string format arguments are in logging +# function parameter format +logging-modules=logging + + +[FORMAT] + +# Maximum number of characters on a single line. +max-line-length=80 + +# Regexp for a line that is allowed to be longer than the limit. +ignore-long-lines=^\s*(# )??$ + +# Allow the body of an if to be on the same line as the test if there is no +# else. +single-line-if-stmt=no + +# List of optional constructs for which whitespace checking is disabled. `dict- +# separator` is used to allow tabulation in dicts, etc.: {1 : 1,\n222: 2}. +# `trailing-comma` allows a space between comma and closing bracket: (a, ). +# `empty-line` allows space-only lines. +no-space-check=trailing-comma,dict-separator + +# Maximum number of lines in a module +max-module-lines=1500 + +# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1 +# tab). +indent-string=' ' + +# Number of spaces of indent required inside a hanging or continued line. +indent-after-paren=4 + +# Expected format of line ending, e.g. empty (any line ending), LF or CRLF. +expected-line-ending-format= + + +[BASIC] + +# List of builtins function names that should not be used, separated by a comma +bad-functions=map,filter,input + +# Good variable names which should always be accepted, separated by a comma +good-names=i,j,k,ex,Run,_,x,e,ip + +# Bad variable names which should always be refused, separated by a comma +bad-names=foo,bar,baz,toto,tutu,tata + +# Colon-delimited sets of names that determine each other's naming style when +# the name regexes allow several styles. +name-group= + +# Include a hint for the correct naming format with invalid-name +include-naming-hint=no + +# Regular expression matching correct function names +function-rgx=[a-z_][a-z0-9_]{2,30}$ + +# Naming hint for function names +function-name-hint=[a-z_][a-z0-9_]{2,30}$ + +# Regular expression matching correct variable names +variable-rgx=[a-z_][a-z0-9_]{2,30}$ + +# Naming hint for variable names +variable-name-hint=[a-z_][a-z0-9_]{2,30}$ + +# Regular expression matching correct constant names +const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$ + +# Naming hint for constant names +const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$ + +# Regular expression matching correct attribute names +attr-rgx=[a-z_][a-z0-9_]{2,30}$ + +# Naming hint for attribute names +attr-name-hint=[a-z_][a-z0-9_]{2,30}$ + +# Regular expression matching correct argument names +argument-rgx=[a-z_][a-z0-9_]{2,30}$ + +# Naming hint for argument names +argument-name-hint=[a-z_][a-z0-9_]{2,30}$ + +# Regular expression matching correct class attribute names +class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$ + +# Naming hint for class attribute names +class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$ + +# Regular expression matching correct inline iteration names +inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$ + +# Naming hint for inline iteration names +inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$ + +# Regular expression matching correct class names +class-rgx=[A-Z_][a-zA-Z0-9]+$ + +# Naming hint for class names +class-name-hint=[A-Z_][a-zA-Z0-9]+$ + +# Regular expression matching correct module names +module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$ + +# Naming hint for module names +module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$ + +# Regular expression matching correct method names +method-rgx=[a-z_][a-z0-9_]{2,30}$ + +# Naming hint for method names +method-name-hint=[a-z_][a-z0-9_]{2,30}$ + +# Regular expression which should only match function or class names that do +# not require a docstring. +no-docstring-rgx=^_ + +# Minimum line length for functions/classes that require docstrings, shorter +# ones are exempt. +docstring-min-length=-1 + + +[ELIF] + +# Maximum number of nested blocks for function / method body +max-nested-blocks=5 + + +[IMPORTS] + +# Deprecated modules which should not be used, separated by a comma +deprecated-modules=regsub,TERMIOS,Bastion,rexec + +# Create a graph of every (i.e. internal and external) dependencies in the +# given file (report RP0402 must not be disabled) +import-graph= + +# Create a graph of external dependencies in the given file (report RP0402 must +# not be disabled) +ext-import-graph= + +# Create a graph of internal dependencies in the given file (report RP0402 must +# not be disabled) +int-import-graph= + + +[DESIGN] + +# Maximum number of arguments for function / method +max-args=10 + +# Argument names that match this expression will be ignored. Default to name +# with leading underscore +ignored-argument-names=_.* + +# Maximum number of locals for function / method body +max-locals=15 + +# Maximum number of return / yield for function / method body +max-returns=6 + +# Maximum number of branch for function / method body +max-branches=12 + +# Maximum number of statements in function / method body +max-statements=50 + +# Maximum number of parents for a class (see R0901). +max-parents=7 + +# Maximum number of attributes for a class (see R0902). +max-attributes=15 + +# Minimum number of public methods for a class (see R0903). +min-public-methods=2 + +# Maximum number of public methods for a class (see R0904). +max-public-methods=20 + +# Maximum number of boolean expressions in a if statement +max-bool-expr=5 + + +[CLASSES] + +# List of method names used to declare (i.e. assign) instance attributes. +defining-attr-methods=__init__,__new__,setUp + +# List of valid names for the first argument in a class method. +valid-classmethod-first-arg=cls + +# List of valid names for the first argument in a metaclass class method. +valid-metaclass-classmethod-first-arg=mcs + +# List of member names, which should be excluded from the protected access +# warning. +exclude-protected=_asdict,_fields,_replace,_source,_make + + +[EXCEPTIONS] + +# Exceptions that will emit a warning when being caught. Defaults to +# "Exception" +overgeneral-exceptions=Exception diff --git a/.pylintrc_gerrit b/.pylintrc_gerrit new file mode 100644 index 000000000..06fc26d28 --- /dev/null +++ b/.pylintrc_gerrit @@ -0,0 +1,419 @@ +[MASTER] + +# Specify a configuration file. +#rcfile= + +# Python code to execute, usually for sys.path manipulation such as +# pygtk.require(). +#init-hook= + +# Add files or directories to the blacklist. They should be base names, not +# paths. +ignore=CVS, tox, logs + +# Pickle collected data for later comparisons. +persistent=yes + +# List of plugins (as comma separated values of python modules names) to load, +# usually to register additional checkers. +load-plugins= + +# Use multiple processes to speed up Pylint. +jobs=1 + +# Allow loading of arbitrary C extensions. Extensions are imported into the +# active Python interpreter and may run arbitrary code. +unsafe-load-any-extension=no + +# A comma-separated list of package or module names from where C extensions may +# be loaded. Extensions are loading into the active Python interpreter and may +# run arbitrary code +extension-pkg-whitelist= + +# Allow optimization of some AST trees. This will activate a peephole AST +# optimizer, which will apply various small optimizations. For instance, it can +# be used to obtain the result of joining multiple strings with the addition +# operator. Joining a lot of strings can lead to a maximum recursion error in +# Pylint and this flag can prevent that. It has one side effect, the resulting +# AST will be different than the one from reality. +optimize-ast=no + + +[MESSAGES CONTROL] + +# Only show warnings with the listed confidence levels. Leave empty to show +# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED +confidence= + +# Enable the message, report, category or checker with the given id(s). You can +# either give multiple identifier separated by comma (,) or put this option +# multiple time. See also the "--disable" option for examples. +#enable= + +# Disable the message, report, category or checker with the given id(s). You +# can either give multiple identifiers separated by comma (,) or put this +# option multiple times (only on the command line, not in the configuration +# file where it should appear only once).You can also use "--disable=all" to +# disable everything first and then reenable specific checks. For example, if +# you want to run only the similarities checker, you can use "--disable=all +# --enable=similarities". If you want to run only the classes checker, but have +# no Warning level messages displayed, use"--disable=all --enable=classes +# --disable=W" + +# Disabling pointless reports: +# RP0401: External dependencies +# RP0402: Modules dependencies graph +# RP0801: Duplication +# R0801: Duplication + +# Disabling messages: +# pointless-string-statement (W0105) +# unnecessary-lambda (W0108) +# deprecated-lambda (W0110) +# bad-builtin (W0141) +# protected-access (W0212) +# fixme (W0511) +# unused-argument (W0613) +# redefined-outer-name (W0621) +# cell-var-from-loop (W0640) +# bare-except (W0702) +# broad-except (W0703) +# logging-format-interpolation (W1202) +# anomalous-backslash-in-string (W1401) - DO NOT ENABLE, INCORRECTLY PARSES REGEX +# no-absolute-import (W1618): +# import missing `from __future__ import absolute_import` Used when an import is not accompanied by from __future__ import absolute_import (default behaviour in Python 3) + +# invalid-name (C0103) +# missing-docstring (C0111) +# misplaced-comparison-constant (C0122) +# too-many-lines (C0302) +# bad-continuation (C0330) + +# too-many-ancestors (R0901) +# too-many-public-methods (R0904) +# too-few-public-methods (R0903) +# too-many-return-statements (R0911) +# too-many-branches (R0912) +# too-many-arguments (R0913) +# too-many-locals (R0914) +# too-many-statements (R0915) + +# suppressed-message (I0020) + +disable=RP0401,RP0402,RP0801,R0801,W0110,W0141,W1618,W0621,W1202,W1401,W0703,W0702,C0111,W0640,C0122,W0511, W0613, C0103, R0903, C0330, W0212, C0302, R0915, R0914, R0912, W0105, R0904, R0911, W0108, R0913, R0901 + +[REPORTS] + +# Set the output format. Available formats are text, parseable, colorized, msvs +# (visual studio) and html. You can also give a reporter class, eg +# mypackage.mymodule.MyReporterClass. +output-format=text +#output-format=parseable + +# Put messages in a separate file for each module / package specified on the +# command line instead of printing them on stdout. Reports (if any) will be +# written in a file name "pylint_global.[txt|html]". +files-output=no + +# Tells whether to display a full report or only the messages +reports=yes + +# Python expression which should return a note less than 10 (10 is the highest +# note). You have access to the variables errors warning, statement which +# respectively contain the number of errors / warnings messages and the total +# number of statements analyzed. This is used by the global evaluation report +# (RP0004). +evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10) + +# Template used to display messages. This is a python new-style format string +# used to format the message information. See doc for all details +#msg-template= + + +[VARIABLES] + +# Tells whether we should check for unused import in __init__ files. +init-import=no + +# A regular expression matching the name of dummy variables (i.e. expectedly +# not used). +dummy-variables-rgx=_$|dummy + +# List of additional names supposed to be defined in builtins. Remember that +# you should avoid to define new builtins when possible. +additional-builtins= + +# List of strings which can identify a callback function by name. A callback +# name must start or end with one of those strings. +callbacks=cb_,_cb + + +[TYPECHECK] + +# Tells whether missing members accessed in mixin class should be ignored. A +# mixin class is detected if its name ends with "mixin" (case insensitive). +ignore-mixin-members=yes + +# List of module names for which member attributes should not be checked +# (useful for modules/projects where namespaces are manipulated during runtime +# and thus existing member attributes cannot be deduced by static analysis. It +# supports qualified module names, as well as Unix pattern matching. +ignored-modules= + +# List of classes names for which member attributes should not be checked +# (useful for classes with attributes dynamically set). This supports can work +# with qualified names. +ignored-classes= + +# List of members which are set dynamically and missed by pylint inference +# system, and so shouldn't trigger E1101 when accessed. Python regular +# expressions are accepted. +generated-members= + + +[SPELLING] + +# Spelling dictionary name. Available dictionaries: none. To make it working +# install python-enchant package. +spelling-dict= + +# List of comma separated words that should not be checked. +spelling-ignore-words= + +# A path to a file that contains private dictionary; one word per line. +spelling-private-dict-file= + +# Tells whether to store unknown words to indicated private dictionary in +# --spelling-private-dict-file option instead of raising a message. +spelling-store-unknown-words=no + + +[SIMILARITIES] + +# Minimum lines number of a similarity. +min-similarity-lines=10 + +# Ignore comments when computing similarities. +ignore-comments=yes + +# Ignore docstrings when computing similarities. +ignore-docstrings=yes + +# Ignore imports when computing similarities. +ignore-imports=no + + +[MISCELLANEOUS] + +# List of note tags to take in consideration, separated by a comma. +notes=FIXME,XXX,TODO + + +[LOGGING] + +# Logging modules to check that the string format arguments are in logging +# function parameter format +logging-modules=logging + + +[FORMAT] + +# Maximum number of characters on a single line. +max-line-length=80 + +# Regexp for a line that is allowed to be longer than the limit. +ignore-long-lines=^\s*(# )??$ + +# Allow the body of an if to be on the same line as the test if there is no +# else. +single-line-if-stmt=no + +# List of optional constructs for which whitespace checking is disabled. `dict- +# separator` is used to allow tabulation in dicts, etc.: {1 : 1,\n222: 2}. +# `trailing-comma` allows a space between comma and closing bracket: (a, ). +# `empty-line` allows space-only lines. +no-space-check=trailing-comma,dict-separator + +# Maximum number of lines in a module +max-module-lines=1500 + +# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1 +# tab). +indent-string=' ' + +# Number of spaces of indent required inside a hanging or continued line. +indent-after-paren=4 + +# Expected format of line ending, e.g. empty (any line ending), LF or CRLF. +expected-line-ending-format= + + +[BASIC] + +# List of builtins function names that should not be used, separated by a comma +bad-functions=map,filter,input + +# Good variable names which should always be accepted, separated by a comma +good-names=i,j,k,ex,Run,_,x,e,ip + +# Bad variable names which should always be refused, separated by a comma +bad-names=foo,bar,baz,toto,tutu,tata + +# Colon-delimited sets of names that determine each other's naming style when +# the name regexes allow several styles. +name-group= + +# Include a hint for the correct naming format with invalid-name +include-naming-hint=no + +# Regular expression matching correct function names +function-rgx=[a-z_][a-z0-9_]{2,30}$ + +# Naming hint for function names +function-name-hint=[a-z_][a-z0-9_]{2,30}$ + +# Regular expression matching correct variable names +variable-rgx=[a-z_][a-z0-9_]{2,30}$ + +# Naming hint for variable names +variable-name-hint=[a-z_][a-z0-9_]{2,30}$ + +# Regular expression matching correct constant names +const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$ + +# Naming hint for constant names +const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$ + +# Regular expression matching correct attribute names +attr-rgx=[a-z_][a-z0-9_]{2,30}$ + +# Naming hint for attribute names +attr-name-hint=[a-z_][a-z0-9_]{2,30}$ + +# Regular expression matching correct argument names +argument-rgx=[a-z_][a-z0-9_]{2,30}$ + +# Naming hint for argument names +argument-name-hint=[a-z_][a-z0-9_]{2,30}$ + +# Regular expression matching correct class attribute names +class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$ + +# Naming hint for class attribute names +class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$ + +# Regular expression matching correct inline iteration names +inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$ + +# Naming hint for inline iteration names +inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$ + +# Regular expression matching correct class names +class-rgx=[A-Z_][a-zA-Z0-9]+$ + +# Naming hint for class names +class-name-hint=[A-Z_][a-zA-Z0-9]+$ + +# Regular expression matching correct module names +module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$ + +# Naming hint for module names +module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$ + +# Regular expression matching correct method names +method-rgx=[a-z_][a-z0-9_]{2,30}$ + +# Naming hint for method names +method-name-hint=[a-z_][a-z0-9_]{2,30}$ + +# Regular expression which should only match function or class names that do +# not require a docstring. +no-docstring-rgx=^_ + +# Minimum line length for functions/classes that require docstrings, shorter +# ones are exempt. +docstring-min-length=-1 + + +[ELIF] + +# Maximum number of nested blocks for function / method body +max-nested-blocks=5 + + +[IMPORTS] + +# Deprecated modules which should not be used, separated by a comma +deprecated-modules=regsub,TERMIOS,Bastion,rexec + +# Create a graph of every (i.e. internal and external) dependencies in the +# given file (report RP0402 must not be disabled) +import-graph= + +# Create a graph of external dependencies in the given file (report RP0402 must +# not be disabled) +ext-import-graph= + +# Create a graph of internal dependencies in the given file (report RP0402 must +# not be disabled) +int-import-graph= + + +[DESIGN] + +# Maximum number of arguments for function / method +max-args=10 + +# Argument names that match this expression will be ignored. Default to name +# with leading underscore +ignored-argument-names=_.* + +# Maximum number of locals for function / method body +max-locals=15 + +# Maximum number of return / yield for function / method body +max-returns=6 + +# Maximum number of branch for function / method body +max-branches=12 + +# Maximum number of statements in function / method body +max-statements=50 + +# Maximum number of parents for a class (see R0901). +max-parents=7 + +# Maximum number of attributes for a class (see R0902). +max-attributes=15 + +# Minimum number of public methods for a class (see R0903). +min-public-methods=2 + +# Maximum number of public methods for a class (see R0904). +max-public-methods=20 + +# Maximum number of boolean expressions in a if statement +max-bool-expr=5 + + +[CLASSES] + +# List of method names used to declare (i.e. assign) instance attributes. +defining-attr-methods=__init__,__new__,setUp + +# List of valid names for the first argument in a class method. +valid-classmethod-first-arg=cls + +# List of valid names for the first argument in a metaclass class method. +valid-metaclass-classmethod-first-arg=mcs + +# List of member names, which should be excluded from the protected access +# warning. +exclude-protected=_asdict,_fields,_replace,_source,_make + + +[EXCEPTIONS] + +# Exceptions that will emit a warning when being caught. Defaults to +# "Exception" +overgeneral-exceptions=Exception diff --git a/tox.ini b/tox.ini index 5bf34b28f..47c3cc738 100644 --- a/tox.ini +++ b/tox.ini @@ -5,7 +5,8 @@ [tox] skipsdist = True -envlist = pep8, py27 +envlist = pep8, py27, pylint, docs, pep8-py{34,35}, pylint-py{27}-{fuelweb,system,gates} +skip_missing_interpreters = True [testenv] deps = -r{toxinidir}/fuelweb_test/requirements.txt @@ -20,9 +21,56 @@ usedevelop = False commands = flake8 {posargs:.} +[testenv:pep8-py34] +# TODO: #deps = hacking==0.7 +deps = flake8 +usedevelop = False +commands = + flake8 {posargs:.} + +[testenv:pep8-py35] +# TODO: #deps = hacking==0.7 +deps = flake8 +usedevelop = False +commands = + flake8 {posargs:.} + [flake8] ignore = H302,H802 exclude = .venv,.git,.tox,dist,doc,*egg,build show-pep8 = True show-source = True count = True + +[testenv:pylint] +deps= + -r{toxinidir}/fuelweb_test/requirements.txt + pylint +commands= + pylint --rcfile=.pylintrc_gerrit fuelweb_test system_test gates_tests + + +[testenv:pylint-py27-fuelweb] +deps= + -r{toxinidir}/fuelweb_test/requirements.txt + pylint +commands=pylint fuelweb_test + +[testenv:pylint-py27-system] +deps= + -r{toxinidir}/fuelweb_test/requirements.txt + pylint +commands=pylint system_test + +[testenv:pylint-py27-gates] +deps= + -r{toxinidir}/fuelweb_test/requirements.txt + pylint +commands=pylint gates_tests + +[testenv:docs] +changedir = doc +deps = + -r{toxinidir}/fuelweb_test/requirements.txt + sphinx +commands = sphinx-build -b html -d _build/doctrees . _build/html