.. Copyright 2011 OpenStack Foundation All Rights Reserved. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. Controlling Glance Servers ========================== This section describes the ways to start, stop, and reload Glance's server programs. Starting a server ----------------- There are two ways to start a Glance server (either the API server or the registry server): * Manually calling the server program * Using the ``glance-control`` server daemon wrapper program We recommend using the second method. Manually starting the server ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The first is by directly calling the server program, passing in command-line options and a single argument for a ``paste.deploy`` configuration file to use when configuring the server application. .. note:: Glance ships with an ``etc/`` directory that contains sample ``paste.deploy`` configuration files that you can copy to a standard configuation directory and adapt for your own uses. Specifically, bind_host must be set properly. If you do `not` specifiy a configuration file on the command line, Glance will do its best to locate a configuration file in one of the following directories, stopping at the first config file it finds: * ``$CWD`` * ``~/.glance`` * ``~/`` * ``/etc/glance`` * ``/etc`` The filename that is searched for depends on the server application name. So, if you are starting up the API server, ``glance-api.conf`` is searched for, otherwise ``glance-registry.conf``. If no configuration file is found, you will see an error, like:: $> glance-api ERROR: Unable to locate any configuration file. Cannot load application glance-api Here is an example showing how you can manually start the ``glance-api`` server and ``glance-registry`` in a shell.:: $ sudo glance-api glance-api.conf --debug & jsuh@mc-ats1:~$ 2011-04-13 14:50:12 DEBUG [glance-api] ******************************************************************************** 2011-04-13 14:50:12 DEBUG [glance-api] Configuration options gathered from config file: 2011-04-13 14:50:12 DEBUG [glance-api] /home/jsuh/glance-api.conf 2011-04-13 14:50:12 DEBUG [glance-api] ================================================ 2011-04-13 14:50:12 DEBUG [glance-api] bind_host 65.114.169.29 2011-04-13 14:50:12 DEBUG [glance-api] bind_port 9292 2011-04-13 14:50:12 DEBUG [glance-api] debug True 2011-04-13 14:50:12 DEBUG [glance-api] default_store file 2011-04-13 14:50:12 DEBUG [glance-api] filesystem_store_datadir /home/jsuh/images/ 2011-04-13 14:50:12 DEBUG [glance-api] registry_host 65.114.169.29 2011-04-13 14:50:12 DEBUG [glance-api] registry_port 9191 2011-04-13 14:50:12 DEBUG [glance-api] verbose False 2011-04-13 14:50:12 DEBUG [glance-api] ******************************************************************************** 2011-04-13 14:50:12 DEBUG [routes.middleware] Initialized with method overriding = True, and path info altering = True 2011-04-13 14:50:12 DEBUG [eventlet.wsgi.server] (21354) wsgi starting up on http://65.114.169.29:9292/ $ sudo glance-registry glance-registry.conf & jsuh@mc-ats1:~$ 2011-04-13 14:51:16 INFO [sqlalchemy.engine.base.Engine.0x...feac] PRAGMA table_info("images") 2011-04-13 14:51:16 INFO [sqlalchemy.engine.base.Engine.0x...feac] () 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Col ('cid', 'name', 'type', 'notnull', 'dflt_value', 'pk') 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (0, u'created_at', u'DATETIME', 1, None, 0) 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (1, u'updated_at', u'DATETIME', 0, None, 0) 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (2, u'deleted_at', u'DATETIME', 0, None, 0) 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (3, u'deleted', u'BOOLEAN', 1, None, 0) 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (4, u'id', u'INTEGER', 1, None, 1) 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (5, u'name', u'VARCHAR(255)', 0, None, 0) 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (6, u'disk_format', u'VARCHAR(20)', 0, None, 0) 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (7, u'container_format', u'VARCHAR(20)', 0, None, 0) 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (8, u'size', u'INTEGER', 0, None, 0) 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (9, u'status', u'VARCHAR(30)', 1, None, 0) 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (10, u'is_public', u'BOOLEAN', 1, None, 0) 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (11, u'location', u'TEXT', 0, None, 0) 2011-04-13 14:51:16 INFO [sqlalchemy.engine.base.Engine.0x...feac] PRAGMA table_info("image_properties") 2011-04-13 14:51:16 INFO [sqlalchemy.engine.base.Engine.0x...feac] () 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Col ('cid', 'name', 'type', 'notnull', 'dflt_value', 'pk') 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (0, u'created_at', u'DATETIME', 1, None, 0) 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (1, u'updated_at', u'DATETIME', 0, None, 0) 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (2, u'deleted_at', u'DATETIME', 0, None, 0) 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (3, u'deleted', u'BOOLEAN', 1, None, 0) 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (4, u'id', u'INTEGER', 1, None, 1) 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (5, u'image_id', u'INTEGER', 1, None, 0) 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (6, u'key', u'VARCHAR(255)', 1, None, 0) 2011-04-13 14:51:16 DEBUG [sqlalchemy.engine.base.Engine.0x...feac] Row (7, u'value', u'TEXT', 0, None, 0) $ ps aux | grep glance root 20009 0.7 0.1 12744 9148 pts/1 S 12:47 0:00 /usr/bin/python /usr/bin/glance-api glance-api.conf --debug root 20012 2.0 0.1 25188 13356 pts/1 S 12:47 0:00 /usr/bin/python /usr/bin/glance-registry glance-registry.conf jsuh 20017 0.0 0.0 3368 744 pts/1 S+ 12:47 0:00 grep glance Simply supply the configuration file as the first argument (the ``etc/glance-api.conf`` and ``etc/glance-registry.conf`` sample configuration files were used in the above example) and then any common options you want to use (``--debug`` was used above to show some of the debugging output that the server shows when starting up. Call the server program with ``--help`` to see all available options you can specify on the command line.) For more information on configuring the server via the ``paste.deploy`` configuration files, see the section entitled :doc:`Configuring Glance servers ` Note that the server `daemonizes` itself by using the standard shell backgrounding indicator, ``&``, in the previous example. For most use cases, we recommend using the ``glance-control`` server daemon wrapper for daemonizing. See below for more details on daemonization with ``glance-control``. Using the ``glance-control`` program to start the server ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The second way to start up a Glance server is to use the ``glance-control`` program. ``glance-control`` is a wrapper script that allows the user to start, stop, restart, and reload the other Glance server programs in a fashion that is more conducive to automation and scripting. Servers started via the ``glance-control`` program are always `daemonized`, meaning that the server program process runs in the background. To start a Glance server with ``glance-control``, simply call ``glance-control`` with a server and the word "start", followed by any command-line options you wish to provide. Start the server with ``glance-control`` in the following way:: $> sudo glance-control [OPTIONS] start [CONFPATH] .. note:: You must use the ``sudo`` program to run ``glance-control`` currently, as the pid files for the server programs are written to /var/run/glance/ Here is an example that shows how to start the ``glance-registry`` server with the ``glance-control`` wrapper script. :: $ sudo glance-control api start glance-api.conf Starting glance-api with /home/jsuh/glance.conf $ sudo glance-control registry start glance-registry.conf Starting glance-registry with /home/jsuh/glance.conf $ ps aux | grep glance root 20038 4.0 0.1 12728 9116 ? Ss 12:51 0:00 /usr/bin/python /usr/bin/glance-api /home/jsuh/glance-api.conf root 20039 6.0 0.1 25188 13356 ? Ss 12:51 0:00 /usr/bin/python /usr/bin/glance-registry /home/jsuh/glance-registry.conf jsuh 20042 0.0 0.0 3368 744 pts/1 S+ 12:51 0:00 grep glance The same configuration files are used by ``glance-control`` to start the Glance server programs, and you can specify (as the example above shows) a configuration file when starting the server. In order for your launched glance service to be monitored for unexpected death and respawned if necessary, use the following option: $ sudo glance-control [service] start --respawn ... Note that this will cause ``glance-control`` itself to remain running. Also note that deliberately stopped services are not respawned, neither are rapidly bouncing services (where process death occurred within one second of the last launch). By default, output from glance services is discarded when launched with ``glance-control``. In order to capture such output via syslog, use the following option: $ sudo glance-control --capture-output ... Stopping a server ----------------- If you started a Glance server manually and did not use the ``&`` backgrounding function, simply send a terminate signal to the server process by typing ``Ctrl-C`` If you started the Glance server using the ``glance-control`` program, you can use the ``glance-control`` program to stop it. Simply do the following:: $> sudo glance-control stop as this example shows:: $> sudo glance-control registry stop Stopping glance-registry pid: 17602 signal: 15 Restarting a server ------------------- You can restart a server with the ``glance-control`` program, as demonstrated here:: $> sudo glance-control registry restart etc/glance-registry.conf Stopping glance-registry pid: 17611 signal: 15 Starting glance-registry with /home/jpipes/repos/glance/trunk/etc/glance-registry.conf