[DEFAULT] # # From glance.glare # # # Set the image owner to tenant or the authenticated user. # # Assign a boolean value to determine the owner of an image. When set to # True, the owner of the image is the tenant. When set to False, the # owner of the image will be the authenticated user issuing the request. # Setting it to False makes the image private to the associated user and # sharing with other users within the same tenant (or "project") # requires explicit image sharing via image membership. # # Possible values: # * True # * False # # Related options: # * None # # (boolean value) #owner_is_tenant = true # # Role used to identify an authenticated user as administrator. # # Provide a string value representing a Keystone role to identify an # administrative user. Users with this role will be granted # administrative privileges. The default value for this option is # 'admin'. # # Possible values: # * A string value which is a valid Keystone role # # Related options: # * None # # (string value) #admin_role = admin # # Allow limited access to unauthenticated users. # # Assign a boolean to determine API access for unathenticated # users. When set to False, the API cannot be accessed by # unauthenticated users. When set to True, unauthenticated users can # access the API with read-only privileges. This however only applies # when using ContextMiddleware. # # Possible values: # * True # * False # # Related options: # * None # # (boolean value) #allow_anonymous_access = false # # Limit the request ID length. # # Provide an integer value to limit the length of the request ID to # the specified length. The default value is 64. Users can change this # to any ineteger value between 0 and 16384 however keeping in mind that # a larger value may flood the logs. # # Possible values: # * Integer value between 0 and 16384 # # Related options: # * None # # (integer value) # Minimum value: 0 #max_request_id_length = 64 # # Public url endpoint to use for Glance/Glare versions response. # # This is the public url endpoint that will appear in the Glance/Glare # "versions" response. If no value is specified, the endpoint that is # displayed in the version's response is that of the host running the # API service. Change the endpoint to represent the proxy URL if the # API service is running behind a proxy. If the service is running # behind a load balancer, add the load balancer's URL for this value. # # Possible values: # * None # * Proxy URL # * Load balancer URL # # Related options: # * None # # (string value) #public_endpoint = # # IP address to bind the glance servers to. # # Provide an IP address to bind the glance server to. The default # value is ``0.0.0.0``. # # Edit this option to enable the server to listen on one particular # IP address on the network card. This facilitates selection of a # particular network interface for the server. # # Possible values: # * A valid IPv4 address # * A valid IPv6 address # # Related options: # * None # # (string value) #bind_host = 0.0.0.0 # # Port number on which the server will listen. # # Provide a valid port number to bind the server's socket to. This # port is then set to identify processes and forward network messages # that arrive at the server. The default bind_port value for the API # server is 9292 and for the registry server is 9191. # # Possible values: # * A valid port number (0 to 65535) # # Related options: # * None # # (port value) # Minimum value: 0 # Maximum value: 65535 #bind_port = # # Number of Glance worker processes to start. # # Provide a non-negative integer value to set the number of child # process workers to service requests. By default, the number of CPUs # available is set as the value for ``workers``. # # Each worker process is made to listen on the port set in the # configuration file and contains a greenthread pool of size 1000. # # NOTE: Setting the number of workers to zero, triggers the creation # of a single API process with a greenthread pool of size 1000. # # Possible values: # * 0 # * Positive integer value (typically equal to the number of CPUs) # # Related options: # * None # # (integer value) # Minimum value: 0 #workers = # # Maximum line size of message headers. # # Provide an integer value representing a length to limit the size of # message headers. The default value is 16384. # # NOTE: ``max_header_line`` may need to be increased when using large # tokens (typically those generated by the Keystone v3 API with big # service catalogs). However, it is to be kept in mind that larger # values for ``max_header_line`` would flood the logs. # # Setting ``max_header_line`` to 0 sets no limit for the line size of # message headers. # # Possible values: # * 0 # * Positive integer # # Related options: # * None # # (integer value) # Minimum value: 0 #max_header_line = 16384 # # Set keep alive option for HTTP over TCP. # # Provide a boolean value to determine sending of keep alive packets. # If set to ``False``, the server returns the header # "Connection: close". If set to ``True``, the server returns a # "Connection: Keep-Alive" in its responses. This enables retention of # the same TCP connection for HTTP conversations instead of opening a # new one with each new request. # # This option must be set to ``False`` if the client socket connection # needs to be closed explicitly after the response is received and # read successfully by the client. # # Possible values: # * True # * False # # Related options: # * None # # (boolean value) #http_keepalive = true # # Timeout for client connections' socket operations. # # Provide a valid integer value representing time in seconds to set # the period of wait before an incoming connection can be closed. The # default value is 900 seconds. # # The value zero implies wait forever. # # Possible values: # * Zero # * Positive integer # # Related options: # * None # # (integer value) # Minimum value: 0 #client_socket_timeout = 900 # # Set the number of incoming connection requests. # # Provide a positive integer value to limit the number of requests in # the backlog queue. The default queue size is 4096. # # An incoming connection to a TCP listener socket is queued before a # connection can be established with the server. Setting the backlog # for a TCP socket ensures a limited queue size for incoming traffic. # # Possible values: # * Positive integer # # Related options: # * None # # (integer value) # Minimum value: 1 #backlog = 4096 # # Set the wait time before a connection recheck. # # Provide a positive integer value representing time in seconds which # is set as the idle wait time before a TCP keep alive packet can be # sent to the host. The default value is 600 seconds. # # Setting ``tcp_keepidle`` helps verify at regular intervals that a # connection is intact and prevents frequent TCP connection # reestablishment. # # Possible values: # * Positive integer value representing time in seconds # # Related options: # * None # # (integer value) # Minimum value: 1 #tcp_keepidle = 600 # # Absolute path to the CA file. # # Provide a string value representing a valid absolute path to # the Certificate Authority file to use for client authentication. # # A CA file typically contains necessary trusted certificates to # use for the client authentication. This is essential to ensure # that a secure connection is established to the server via the # internet. # # Possible values: # * Valid absolute path to the CA file # # Related options: # * None # # (string value) #ca_file = /etc/ssl/cafile # # Absolute path to the certificate file. # # Provide a string value representing a valid absolute path to the # certificate file which is required to start the API service # securely. # # A certificate file typically is a public key container and includes # the server's public key, server name, server information and the # signature which was a result of the verification process using the # CA certificate. This is required for a secure connection # establishment. # # Possible values: # * Valid absolute path to the certificate file # # Related options: # * None # # (string value) #cert_file = /etc/ssl/certs # # Absolute path to a private key file. # # Provide a string value representing a valid absolute path to a # private key file which is required to establish the client-server # connection. # # Possible values: # * Absolute path to the private key file # # Related options: # * None # # (string value) #key_file = /etc/ssl/key/key-file.pem # # Default publisher_id for outgoing Glance notifications. # # This is the value that the notification driver will use to identify # messages for events originating from the Glance service. Typically, # this is the hostname of the instance that generated the message. # # Possible values: # * Any reasonable instance identifier, for example: image.host1 # # Related options: # * None # # (string value) #default_publisher_id = image.localhost # # List of notifications to be disabled. # # Specify a list of notifications that should not be emitted. # A notification can be given either as a notification type to # disable a single event notification, or as a notification group # prefix to disable all event notifications within a group. # # Possible values: # A comma-separated list of individual notification types or # notification groups to be disabled. Currently supported groups: # * image # * image.member # * task # * metadef_namespace # * metadef_object # * metadef_property # * metadef_resource_type # * metadef_tag # For a complete listing and description of each event refer to: # http://docs.openstack.org/developer/glance/notifications.html # # The values must be specified as: . # For example: image.create,task.success,metadef_tag # # Related options: # * None # # (list value) #disabled_notifications = # # From oslo.log # # If set to true, the logging level will be set to DEBUG instead of the default # INFO level. (boolean value) # Note: This option can be changed without restarting. #debug = false # DEPRECATED: If set to false, the logging level will be set to WARNING instead # of the default INFO level. (boolean value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #verbose = true # The name of a logging configuration file. This file is appended to any # existing logging configuration files. For details about logging configuration # files, see the Python logging module documentation. Note that when logging # configuration files are used then all logging configuration is set in the # configuration file and other logging configuration options are ignored (for # example, logging_context_format_string). (string value) # Note: This option can be changed without restarting. # Deprecated group/name - [DEFAULT]/log_config #log_config_append = # Defines the format string for %%(asctime)s in log records. Default: # %(default)s . This option is ignored if log_config_append is set. (string # value) #log_date_format = %Y-%m-%d %H:%M:%S # (Optional) Name of log file to send logging output to. If no default is set, # logging will go to stderr as defined by use_stderr. This option is ignored if # log_config_append is set. (string value) # Deprecated group/name - [DEFAULT]/logfile #log_file = # (Optional) The base directory used for relative log_file paths. This option # is ignored if log_config_append is set. (string value) # Deprecated group/name - [DEFAULT]/logdir #log_dir = # Uses logging handler designed to watch file system. When log file is moved or # removed this handler will open a new log file with specified path # instantaneously. It makes sense only if log_file option is specified and Linux # platform is used. This option is ignored if log_config_append is set. (boolean # value) #watch_log_file = false # Use syslog for logging. Existing syslog format is DEPRECATED and will be # changed later to honor RFC5424. This option is ignored if log_config_append is # set. (boolean value) #use_syslog = false # Syslog facility to receive log lines. This option is ignored if # log_config_append is set. (string value) #syslog_log_facility = LOG_USER # Log output to standard error. This option is ignored if log_config_append is # set. (boolean value) #use_stderr = true # Format string to use for log messages with context. (string value) #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s # Format string to use for log messages when context is undefined. (string # value) #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s # Additional data to append to log message when logging level for the message is # DEBUG. (string value) #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d # Prefix each line of exception output with this format. (string value) #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s # Defines the format string for %(user_identity)s that is used in # logging_context_format_string. (string value) #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s # List of package logging levels in logger=LEVEL pairs. This option is ignored # if log_config_append is set. (list value) #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO # Enables or disables publication of error events. (boolean value) #publish_errors = false # The format for an instance that is passed with the log message. (string value) #instance_format = "[instance: %(uuid)s] " # The format for an instance UUID that is passed with the log message. (string # value) #instance_uuid_format = "[instance: %(uuid)s] " # Enables or disables fatal status of deprecations. (boolean value) #fatal_deprecations = false [cors] # # From oslo.middleware.cors # # Indicate whether this resource may be shared with the domain received in the # requests "origin" header. Format: "://[:]", no trailing # slash. Example: https://horizon.example.com (list value) #allowed_origin = # Indicate that the actual request can include user credentials (boolean value) #allow_credentials = true # Indicate which headers are safe to expose to the API. Defaults to HTTP Simple # Headers. (list value) #expose_headers = # Maximum cache age of CORS preflight requests. (integer value) #max_age = 3600 # Indicate which methods can be used during the actual request. (list value) #allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH # Indicate which header field names may be used during the actual request. (list # value) #allow_headers = [cors.subdomain] # # From oslo.middleware.cors # # Indicate whether this resource may be shared with the domain received in the # requests "origin" header. Format: "://[:]", no trailing # slash. Example: https://horizon.example.com (list value) #allowed_origin = # Indicate that the actual request can include user credentials (boolean value) #allow_credentials = true # Indicate which headers are safe to expose to the API. Defaults to HTTP Simple # Headers. (list value) #expose_headers = # Maximum cache age of CORS preflight requests. (integer value) #max_age = 3600 # Indicate which methods can be used during the actual request. (list value) #allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH # Indicate which header field names may be used during the actual request. (list # value) #allow_headers = [database] # # From oslo.db # # DEPRECATED: The file name to use with SQLite. (string value) # Deprecated group/name - [DEFAULT]/sqlite_db # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Should use config option connection or slave_connection to connect the # database. #sqlite_db = oslo.sqlite # If True, SQLite uses synchronous mode. (boolean value) # Deprecated group/name - [DEFAULT]/sqlite_synchronous #sqlite_synchronous = true # The back end to use for the database. (string value) # Deprecated group/name - [DEFAULT]/db_backend #backend = sqlalchemy # The SQLAlchemy connection string to use to connect to the database. (string # value) # Deprecated group/name - [DEFAULT]/sql_connection # Deprecated group/name - [DATABASE]/sql_connection # Deprecated group/name - [sql]/connection #connection = # The SQLAlchemy connection string to use to connect to the slave database. # (string value) #slave_connection = # The SQL mode to be used for MySQL sessions. This option, including the # default, overrides any server-set SQL mode. To use whatever SQL mode is set by # the server configuration, set this to no value. Example: mysql_sql_mode= # (string value) #mysql_sql_mode = TRADITIONAL # Timeout before idle SQL connections are reaped. (integer value) # Deprecated group/name - [DEFAULT]/sql_idle_timeout # Deprecated group/name - [DATABASE]/sql_idle_timeout # Deprecated group/name - [sql]/idle_timeout #idle_timeout = 3600 # Minimum number of SQL connections to keep open in a pool. (integer value) # Deprecated group/name - [DEFAULT]/sql_min_pool_size # Deprecated group/name - [DATABASE]/sql_min_pool_size #min_pool_size = 1 # Maximum number of SQL connections to keep open in a pool. Setting a value of 0 # indicates no limit. (integer value) # Deprecated group/name - [DEFAULT]/sql_max_pool_size # Deprecated group/name - [DATABASE]/sql_max_pool_size #max_pool_size = 5 # Maximum number of database connection retries during startup. Set to -1 to # specify an infinite retry count. (integer value) # Deprecated group/name - [DEFAULT]/sql_max_retries # Deprecated group/name - [DATABASE]/sql_max_retries #max_retries = 10 # Interval between retries of opening a SQL connection. (integer value) # Deprecated group/name - [DEFAULT]/sql_retry_interval # Deprecated group/name - [DATABASE]/reconnect_interval #retry_interval = 10 # If set, use this value for max_overflow with SQLAlchemy. (integer value) # Deprecated group/name - [DEFAULT]/sql_max_overflow # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow #max_overflow = 50 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer # value) # Minimum value: 0 # Maximum value: 100 # Deprecated group/name - [DEFAULT]/sql_connection_debug #connection_debug = 0 # Add Python stack traces to SQL as comment strings. (boolean value) # Deprecated group/name - [DEFAULT]/sql_connection_trace #connection_trace = false # If set, use this value for pool_timeout with SQLAlchemy. (integer value) # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout #pool_timeout = # Enable the experimental use of database reconnect on connection lost. (boolean # value) #use_db_reconnect = false # Seconds between retries of a database transaction. (integer value) #db_retry_interval = 1 # If True, increases the interval between retries of a database operation up to # db_max_retry_interval. (boolean value) #db_inc_retry_interval = true # If db_inc_retry_interval is set, the maximum seconds between retries of a # database operation. (integer value) #db_max_retry_interval = 10 # Maximum retries in case of connection error or deadlock error before error is # raised. Set to -1 to specify an infinite retry count. (integer value) #db_max_retries = 20 # # From oslo.db.concurrency # # Enable the experimental use of thread pooling for all DB API calls (boolean # value) # Deprecated group/name - [DEFAULT]/dbapi_use_tpool #use_tpool = false [glance_store] # # From glance.store # # # List of enabled Glance stores. # # Register the storage backends to use for storing disk images # as a comma separated list. The default stores enabled for # storing disk images with Glance are ``file`` and ``http``. # # Possible values: # * A comma separated list that could include: # * file # * http # * swift # * rbd # * sheepdog # * cinder # * vmware # # Related Options: # * default_store # # (list value) #stores = file,http # # The default scheme to use for storing images. # # Provide a string value representing the default scheme to use for # storing images. If not set, Glance uses ``file`` as the default # scheme to store images with the ``file`` store. # # NOTE: The value given for this configuration option must be a valid # scheme for a store registered with the ``stores`` configuration # option. # # Possible values: # * file # * filesystem # * http # * https # * swift # * swift+http # * swift+https # * swift+config # * rbd # * sheepdog # * cinder # * vsphere # # Related Options: # * stores # # (string value) # Allowed values: file, filesystem, http, https, swift, swift+http, swift+https, swift+config, rbd, sheepdog, cinder, vsphere #default_store = file # # Minimum interval in seconds to execute updating dynamic storage # capabilities based on current backend status. # # Provide an integer value representing time in seconds to set the # minimum interval before an update of dynamic storage capabilities # for a storage backend can be attempted. Setting # ``store_capabilities_update_min_interval`` does not mean updates # occur periodically based on the set interval. Rather, the update # is performed at the elapse of this interval set, if an operation # of the store is triggered. # # By default, this option is set to zero and is disabled. Provide an # integer value greater than zero to enable this option. # # NOTE: For more information on store capabilities and their updates, # please visit: https://specs.openstack.org/openstack/glance-specs/specs/kilo # /store-capabilities.html # # For more information on setting up a particular store in your # deplyment and help with the usage of this feature, please contact # the storage driver maintainers listed here: # http://docs.openstack.org/developer/glance_store/drivers/index.html # # Possible values: # * Zero # * Positive integer # # Related Options: # * None # # (integer value) # Minimum value: 0 #store_capabilities_update_min_interval = 0 # # Information to match when looking for cinder in the service catalog. # # When the ``cinder_endpoint_template`` is not set and any of # ``cinder_store_auth_address``, ``cinder_store_user_name``, # ``cinder_store_project_name``, ``cinder_store_password`` is not set, # cinder store uses this information to lookup cinder endpoint from the service # catalog in the current context. ``cinder_os_region_name``, if set, is taken # into consideration to fetch the appropriate endpoint. # # The service catalog can be listed by the ``openstack catalog list`` command. # # Possible values: # * A string of of the following form: # ``::`` # At least ``service_type`` and ``endpoint_type`` should be specified. # ``service_name`` can be omitted. # # Related options: # * cinder_os_region_name # * cinder_endpoint_template # * cinder_store_auth_address # * cinder_store_user_name # * cinder_store_project_name # * cinder_store_password # # (string value) #cinder_catalog_info = volumev2::publicURL # # Override service catalog lookup with template for cinder endpoint. # # When this option is set, this value is used to generate cinder endpoint, # instead of looking up from the service catalog. # This value is ignored if ``cinder_store_auth_address``, # ``cinder_store_user_name``, ``cinder_store_project_name``, and # ``cinder_store_password`` are specified. # # If this configuration option is set, ``cinder_catalog_info`` will be ignored. # # Possible values: # * URL template string for cinder endpoint, where ``%%(tenant)s`` is # replaced with the current tenant (project) name. # For example: ``http://cinder.openstack.example.org/v2/%%(tenant)s`` # # Related options: # * cinder_store_auth_address # * cinder_store_user_name # * cinder_store_project_name # * cinder_store_password # * cinder_catalog_info # # (string value) #cinder_endpoint_template = # # Region name to lookup cinder service from the service catalog. # # This is used only when ``cinder_catalog_info`` is used for determining the # endpoint. If set, the lookup for cinder endpoint by this node is filtered to # the specified region. It is useful when multiple regions are listed in the # catalog. If this is not set, the endpoint is looked up from every region. # # Possible values: # * A string that is a valid region name. # # Related options: # * cinder_catalog_info # # (string value) # Deprecated group/name - [glance_store]/os_region_name #cinder_os_region_name = # # Location of a CA certificates file used for cinder client requests. # # The specified CA certificates file, if set, is used to verify cinder # connections via HTTPS endpoint. If the endpoint is HTTP, this value is # ignored. # ``cinder_api_insecure`` must be set to ``True`` to enable the verification. # # Possible values: # * Path to a ca certificates file # # Related options: # * cinder_api_insecure # # (string value) #cinder_ca_certificates_file = # # Number of cinderclient retries on failed http calls. # # When a call failed by any errors, cinderclient will retry the call up to the # specified times after sleeping a few seconds. # # Possible values: # * A positive integer # # Related options: # * None # # (integer value) # Minimum value: 0 #cinder_http_retries = 3 # # Time period, in seconds, to wait for a cinder volume transition to # complete. # # When the cinder volume is created, deleted, or attached to the glance node to # read/write the volume data, the volume's state is changed. For example, the # newly created volume status changes from ``creating`` to ``available`` after # the creation process is completed. This specifies the maximum time to wait for # the status change. If a timeout occurs while waiting, or the status is changed # to an unexpected value (e.g. `error``), the image creation fails. # # Possible values: # * A positive integer # # Related options: # * None # # (integer value) # Minimum value: 0 #cinder_state_transition_timeout = 300 # # Allow to perform insecure SSL requests to cinder. # # If this option is set to True, HTTPS endpoint connection is verified using the # CA certificates file specified by ``cinder_ca_certificates_file`` option. # # Possible values: # * True # * False # # Related options: # * cinder_ca_certificates_file # # (boolean value) #cinder_api_insecure = false # # The address where the cinder authentication service is listening. # # When all of ``cinder_store_auth_address``, ``cinder_store_user_name``, # ``cinder_store_project_name``, and ``cinder_store_password`` options are # specified, the specified values are always used for the authentication. # This is useful to hide the image volumes from users by storing them in a # project/tenant specific to the image service. It also enables users to share # the image volume among other projects under the control of glance's ACL. # # If either of these options are not set, the cinder endpoint is looked up # from the service catalog, and current context's user and project are used. # # Possible values: # * A valid authentication service address, for example: # ``http://openstack.example.org/identity/v2.0`` # # Related options: # * cinder_store_user_name # * cinder_store_password # * cinder_store_project_name # # (string value) #cinder_store_auth_address = # # User name to authenticate against cinder. # # This must be used with all the following related options. If any of these are # not specified, the user of the current context is used. # # Possible values: # * A valid user name # # Related options: # * cinder_store_auth_address # * cinder_store_password # * cinder_store_project_name # # (string value) #cinder_store_user_name = # # Password for the user authenticating against cinder. # # This must be used with all the following related options. If any of these are # not specified, the user of the current context is used. # # Possible values: # * A valid password for the user specified by ``cinder_store_user_name`` # # Related options: # * cinder_store_auth_address # * cinder_store_user_name # * cinder_store_project_name # # (string value) #cinder_store_password = # # Project name where the image volume is stored in cinder. # # If this configuration option is not set, the project in current context is # used. # # This must be used with all the following related options. If any of these are # not specified, the project of the current context is used. # # Possible values: # * A valid project name # # Related options: # * ``cinder_store_auth_address`` # * ``cinder_store_user_name`` # * ``cinder_store_password`` # # (string value) #cinder_store_project_name = # # Path to the rootwrap configuration file to use for running commands as root. # # The cinder store requires root privileges to operate the image volumes (for # connecting to iSCSI/FC volumes and reading/writing the volume data, etc.). # The configuration file should allow the required commands by cinder store and # os-brick library. # # Possible values: # * Path to the rootwrap config file # # Related options: # * None # # (string value) #rootwrap_config = /etc/glance/rootwrap.conf # # Directory to which the filesystem backend store writes images. # # Upon start up, Glance creates the directory if it doesn't already # exist and verifies write access to the user under which # ``glance-api`` runs. If the write access isn't available, a # ``BadStoreConfiguration`` exception is raised and the filesystem # store may not be available for adding new images. # # NOTE: This directory is used only when filesystem store is used as a # storage backend. Either ``filesystem_store_datadir`` or # ``filesystem_store_datadirs`` option must be specified in # ``glance-api.conf``. If both options are specified, a # ``BadStoreConfiguration`` will be raised and the filesystem store # may not be available for adding new images. # # Possible values: # * A valid path to a directory # # Related options: # * ``filesystem_store_datadirs`` # * ``filesystem_store_file_perm`` # # (string value) #filesystem_store_datadir = /var/lib/glance/images # # List of directories and their priorities to which the filesystem # backend store writes images. # # The filesystem store can be configured to store images in multiple # directories as opposed to using a single directory specified by the # ``filesystem_store_datadir`` configuration option. When using # multiple directories, each directory can be given an optional # priority to specify the preference order in which they should # be used. Priority is an integer that is concatenated to the # directory path with a colon where a higher value indicates higher # priority. When two directories have the same priority, the directory # with most free space is used. When no priority is specified, it # defaults to zero. # # More information on configuring filesystem store with multiple store # directories can be found at # http://docs.openstack.org/developer/glance/configuring.html # # NOTE: This directory is used only when filesystem store is used as a # storage backend. Either ``filesystem_store_datadir`` or # ``filesystem_store_datadirs`` option must be specified in # ``glance-api.conf``. If both options are specified, a # ``BadStoreConfiguration`` will be raised and the filesystem store # may not be available for adding new images. # # Possible values: # * List of strings of the following form: # * ``:`` # # Related options: # * ``filesystem_store_datadir`` # * ``filesystem_store_file_perm`` # # (multi valued) #filesystem_store_datadirs = # # Filesystem store metadata file. # # The path to a file which contains the metadata to be returned with # any location associated with the filesystem store. The file must # contain a valid JSON object. The object should contain the keys # ``id`` and ``mountpoint``. The value for both keys should be a # string. # # Possible values: # * A valid path to the store metadata file # # Related options: # * None # # (string value) #filesystem_store_metadata_file = # # File access permissions for the image files. # # Set the intended file access permissions for image data. This provides # a way to enable other services, e.g. Nova, to consume images directly # from the filesystem store. The users running the services that are # intended to be given access to could be made a member of the group # that owns the files created. Assigning a value less then or equal to # zero for this configuration option signifies that no changes be made # to the default permissions. This value will be decoded as an octal # digit. # # For more information, please refer the documentation at # http://docs.openstack.org/developer/glance/configuring.html # # Possible values: # * A valid file access permission # * Zero # * Any negative integer # # Related options: # * None # # (integer value) #filesystem_store_file_perm = 0 # # Path to the CA bundle file. # # This configuration option enables the operator to use a custom # Certificate Authority file to verify the remote server certificate. If # this option is set, the ``https_insecure`` option will be ignored and # the CA file specified will be used to authenticate the server # certificate and establish a secure connection to the server. # # Possible values: # * A valid path to a CA file # # Related options: # * https_insecure # # (string value) #https_ca_certificates_file = # # Set verification of the remote server certificate. # # This configuration option takes in a boolean value to determine # whether or not to verify the remote server certificate. If set to # True, the remote server certificate is not verified. If the option is # set to False, then the default CA truststore is used for verification. # # This option is ignored if ``https_ca_certificates_file`` is set. # The remote server certificate will then be verified using the file # specified using the ``https_ca_certificates_file`` option. # # Possible values: # * True # * False # # Related options: # * https_ca_certificates_file # # (boolean value) #https_insecure = true # # The http/https proxy information to be used to connect to the remote # server. # # This configuration option specifies the http/https proxy information # that should be used to connect to the remote server. The proxy # information should be a key value pair of the scheme and proxy, for # example, http:10.0.0.1:3128. You can also specify proxies for multiple # schemes by separating the key value pairs with a comma, for example, # http:10.0.0.1:3128, https:10.0.0.1:1080. # # Possible values: # * A comma separated list of scheme:proxy pairs as described above # # Related options: # * None # # (dict value) #http_proxy_information = # # Size, in megabytes, to chunk RADOS images into. # # Provide an integer value representing the size in megabytes to chunk # Glance images into. The default chunk size is 8 megabytes. For optimal # performance, the value should be a power of two. # # When Ceph's RBD object storage system is used as the storage backend # for storing Glance images, the images are chunked into objects of the # size set using this option. These chunked objects are then stored # across the distributed block data store to use for Glance. # # Possible Values: # * Any positive integer value # # Related options: # * None # # (integer value) # Minimum value: 1 #rbd_store_chunk_size = 8 # # RADOS pool in which images are stored. # # When RBD is used as the storage backend for storing Glance images, the # images are stored by means of logical grouping of the objects (chunks # of images) into a ``pool``. Each pool is defined with the number of # placement groups it can contain. The default pool that is used is # 'images'. # # More information on the RBD storage backend can be found here: # http://ceph.com/planet/how-data-is-stored-in-ceph-cluster/ # # Possible Values: # * A valid pool name # # Related options: # * None # # (string value) #rbd_store_pool = images # # RADOS user to authenticate as. # # This configuration option takes in the RADOS user to authenticate as. # This is only needed when RADOS authentication is enabled and is # applicable only if the user is using Cephx authentication. If the # value for this option is not set by the user or is set to None, a # default value will be chosen, which will be based on the client. # section in rbd_store_ceph_conf. # # Possible Values: # * A valid RADOS user # # Related options: # * rbd_store_ceph_conf # # (string value) #rbd_store_user = # # Ceph configuration file path. # # This configuration option takes in the path to the Ceph configuration # file to be used. If the value for this option is not set by the user # or is set to None, librados will locate the default configuration file # which is located at /etc/ceph/ceph.conf. If using Cephx # authentication, this file should include a reference to the right # keyring in a client. section # # Possible Values: # * A valid path to a configuration file # # Related options: # * rbd_store_user # # (string value) #rbd_store_ceph_conf = /etc/ceph/ceph.conf # # Timeout value for connecting to Ceph cluster. # # This configuration option takes in the timeout value in seconds used # when connecting to the Ceph cluster i.e. it sets the time to wait for # glance-api before closing the connection. This prevents glance-api # hangups during the connection to RBD. If the value for this option # is set to less than or equal to 0, no timeout is set and the default # librados value is used. # # Possible Values: # * Any integer value # # Related options: # * None # # (integer value) #rados_connect_timeout = 0 # # Chunk size for images to be stored in Sheepdog data store. # # Provide an integer value representing the size in mebibyte # (1048576 bytes) to chunk Glance images into. The default # chunk size is 64 mebibytes. # # When using Sheepdog distributed storage system, the images are # chunked into objects of this size and then stored across the # distributed data store to use for Glance. # # Chunk sizes, if a power of two, help avoid fragmentation and # enable improved performance. # # Possible values: # * Positive integer value representing size in mebibytes. # # Related Options: # * None # # (integer value) # Minimum value: 1 #sheepdog_store_chunk_size = 64 # # Port number on which the sheep daemon will listen. # # Provide an integer value representing a valid port number on # which you want the Sheepdog daemon to listen on. The default # port is 7000. # # The Sheepdog daemon, also called 'sheep', manages the storage # in the distributed cluster by writing objects across the storage # network. It identifies and acts on the messages it receives on # the port number set using ``sheepdog_store_port`` option to store # chunks of Glance images. # # Possible values: # * A valid port number (0 to 65535) # # Related Options: # * sheepdog_store_address # # (port value) # Minimum value: 0 # Maximum value: 65535 #sheepdog_store_port = 7000 # # Address to bind the Sheepdog daemon to. # # Provide a string value representing the address to bind the # Sheepdog daemon to. The default address set for the 'sheep' # is 127.0.0.1. # # The Sheepdog daemon, also called 'sheep', manages the storage # in the distributed cluster by writing objects across the storage # network. It identifies and acts on the messages directed to the # address set using ``sheepdog_store_address`` option to store # chunks of Glance images. # # Possible values: # * A valid IPv4 address # * A valid IPv6 address # * A valid hostname # # Related Options: # * sheepdog_store_port # # (string value) #sheepdog_store_address = 127.0.0.1 # # Set verification of the server certificate. # # This boolean determines whether or not to verify the server # certificate. If this option is set to True, swiftclient won't check # for a valid SSL certificate when authenticating. If the option is set # to False, then the default CA truststore is used for verification. # # Possible values: # * True # * False # # Related options: # * swift_store_cacert # # (boolean value) #swift_store_auth_insecure = false # # Path to the CA bundle file. # # This configuration option enables the operator to specify the path to # a custom Certificate Authority file for SSL verification when # connecting to Swift. # # Possible values: # * A valid path to a CA file # # Related options: # * swift_store_auth_insecure # # (string value) #swift_store_cacert = /etc/ssl/certs/ca-certificates.crt # # The region of Swift endpoint to use by Glance. # # Provide a string value representing a Swift region where Glance # can connect to for image storage. By default, there is no region # set. # # When Glance uses Swift as the storage backend to store images # for a specific tenant that has multiple endpoints, setting of a # Swift region with ``swift_store_region`` allows Glance to connect # to Swift in the specified region as opposed to a single region # connectivity. # # This option can be configured for both single-tenant and # multi-tenant storage. # # NOTE: Setting the region with ``swift_store_region`` is # tenant-specific and is necessary ``only if`` the tenant has # multiple endpoints across different regions. # # Possible values: # * A string value representing a valid Swift region. # # Related Options: # * None # # (string value) #swift_store_region = RegionTwo # # The URL endpoint to use for Swift backend storage. # # Provide a string value representing the URL endpoint to use for # storing Glance images in Swift store. By default, an endpoint # is not set and the storage URL returned by ``auth`` is used. # Setting an endpoint with ``swift_store_endpoint`` overrides the # storage URL and is used for Glance image storage. # # NOTE: The URL should include the path up to, but excluding the # container. The location of an object is obtained by appending # the container and object to the configured URL. # # Possible values: # * String value representing a valid URL path up to a Swift container # # Related Options: # * None # # (string value) #swift_store_endpoint = https://swift.openstack.example.org/v1/path_not_including_container_name # # Endpoint Type of Swift service. # # This string value indicates the endpoint type to use to fetch the # Swift endpoint. The endpoint type determines the actions the user will # be allowed to perform, for instance, reading and writing to the Store. # This setting is only used if swift_store_auth_version is greater than # 1. # # Possible values: # * publicURL # * adminURL # * internalURL # # Related options: # * swift_store_endpoint # # (string value) # Allowed values: publicURL, adminURL, internalURL #swift_store_endpoint_type = publicURL # # Type of Swift service to use. # # Provide a string value representing the service type to use for # storing images while using Swift backend storage. The default # service type is set to ``object-store``. # # NOTE: If ``swift_store_auth_version`` is set to 2, the value for # this configuration option needs to be ``object-store``. If using # a higher version of Keystone or a different auth scheme, this # option may be modified. # # Possible values: # * A string representing a valid service type for Swift storage. # # Related Options: # * None # # (string value) #swift_store_service_type = object-store # # Name of single container to store images/name prefix for multiple containers # # When a single container is being used to store images, this configuration # option indicates the container within the Glance account to be used for # storing all images. When multiple containers are used to store images, this # will be the name prefix for all containers. Usage of single/multiple # containers can be controlled using the configuration option # ``swift_store_multiple_containers_seed``. # # When using multiple containers, the containers will be named after the value # set for this configuration option with the first N chars of the image UUID # as the suffix delimited by an underscore (where N is specified by # ``swift_store_multiple_containers_seed``). # # Example: if the seed is set to 3 and swift_store_container = ``glance``, then # an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be placed in # the container ``glance_fda``. All dashes in the UUID are included when # creating the container name but do not count toward the character limit, so # when N=10 the container name would be ``glance_fdae39a1-ba.`` # # Possible values: # * If using single container, this configuration option can be any string # that is a valid swift container name in Glance's Swift account # * If using multiple containers, this configuration option can be any # string as long as it satisfies the container naming rules enforced by # Swift. The value of ``swift_store_multiple_containers_seed`` should be # taken into account as well. # # Related options: # * ``swift_store_multiple_containers_seed`` # * ``swift_store_multi_tenant`` # * ``swift_store_create_container_on_put`` # # (string value) #swift_store_container = glance # # The size threshold, in MB, after which Glance will start segmenting image # data. # # Swift has an upper limit on the size of a single uploaded object. By default, # this is 5GB. To upload objects bigger than this limit, objects are segmented # into multiple smaller objects that are tied together with a manifest file. # For more detail, refer to # http://docs.openstack.org/developer/swift/overview_large_objects.html # # This configuration option specifies the size threshold over which the Swift # driver will start segmenting image data into multiple smaller files. # Currently, the Swift driver only supports creating Dynamic Large Objects. # # NOTE: This should be set by taking into account the large object limit # enforced by the Swift cluster in consideration. # # Possible values: # * A positive integer that is less than or equal to the large object limit # enforced by the Swift cluster in consideration. # # Related options: # * ``swift_store_large_object_chunk_size`` # # (integer value) # Minimum value: 1 #swift_store_large_object_size = 5120 # # The maximum size, in MB, of the segments when image data is segmented. # # When image data is segmented to upload images that are larger than the limit # enforced by the Swift cluster, image data is broken into segments that are no # bigger than the size specified by this configuration option. # Refer to ``swift_store_large_object_size`` for more detail. # # For example: if ``swift_store_large_object_size`` is 5GB and # ``swift_store_large_object_chunk_size`` is 1GB, an image of size 6.2GB will be # segmented into 7 segments where the first six segments will be 1GB in size and # the seventh segment will be 0.2GB. # # Possible values: # * A positive integer that is less than or equal to the large object limit # enforced by Swift cluster in consideration. # # Related options: # * ``swift_store_large_object_size`` # # (integer value) # Minimum value: 1 #swift_store_large_object_chunk_size = 200 # # Create container, if it doesn't already exist, when uploading image. # # At the time of uploading an image, if the corresponding container doesn't # exist, it will be created provided this configuration option is set to True. # By default, it won't be created. This behavior is applicable for both single # and multiple containers mode. # # Possible values: # * True # * False # # Related options: # * None # # (boolean value) #swift_store_create_container_on_put = false # # Store images in tenant's Swift account. # # This enables multi-tenant storage mode which causes Glance images to be stored # in tenant specific Swift accounts. If this is disabled, Glance stores all # images in its own account. More details multi-tenant store can be found at # https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage # # Possible values: # * True # * False # # Related options: # * None # # (boolean value) #swift_store_multi_tenant = false # # Seed indicating the number of containers to use for storing images. # # When using a single-tenant store, images can be stored in one or more than one # containers. When set to 0, all images will be stored in one single container. # When set to an integer value between 1 and 32, multiple containers will be # used to store images. This configuration option will determine how many # containers are created. The total number of containers that will be used is # equal to 16^N, so if this config option is set to 2, then 16^2=256 containers # will be used to store images. # # Please refer to ``swift_store_container`` for more detail on the naming # convention. More detail about using multiple containers can be found at # https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-store- # multiple-containers.html # # NOTE: This is used only when swift_store_multi_tenant is disabled. # # Possible values: # * A non-negative integer less than or equal to 32 # # Related options: # * ``swift_store_container`` # * ``swift_store_multi_tenant`` # * ``swift_store_create_container_on_put`` # # (integer value) # Minimum value: 0 # Maximum value: 32 #swift_store_multiple_containers_seed = 0 # # List of tenants that will be granted admin access. # # This is a list of tenants that will be granted read/write access on # all Swift containers created by Glance in multi-tenant mode. The # default value is an empty list. # # Possible values: # * A comma separated list of strings representing UUIDs of Keystone # projects/tenants # # Related options: # * None # # (list value) #swift_store_admin_tenants = # # SSL layer compression for HTTPS Swift requests. # # Provide a boolean value to determine whether or not to compress # HTTPS Swift requests for images at the SSL layer. By default, # compression is enabled. # # When using Swift as the backend store for Glance image storage, # SSL layer compression of HTTPS Swift requests can be set using # this option. If set to False, SSL layer compression of HTTPS # Swift requests is disabled. Disabling this option may improve # performance for images which are already in a compressed format, # for example, qcow2. # # Possible values: # * True # * False # # Related Options: # * None # # (boolean value) #swift_store_ssl_compression = true # # The number of times a Swift download will be retried before the # request fails. # # Provide an integer value representing the number of times an image # download must be retried before erroring out. The default value is # zero (no retry on a failed image download). When set to a positive # integer value, ``swift_store_retry_get_count`` ensures that the # download is attempted this many more times upon a download failure # before sending an error message. # # Possible values: # * Zero # * Positive integer value # # Related Options: # * None # # (integer value) # Minimum value: 0 #swift_store_retry_get_count = 0 # # Time in seconds defining the size of the window in which a new # token may be requested before the current token is due to expire. # # Typically, the Swift storage driver fetches a new token upon the # expiration of the current token to ensure continued access to # Swift. However, some Swift transactions (like uploading image # segments) may not recover well if the token expires on the fly. # # Hence, by fetching a new token before the current token expiration, # we make sure that the token does not expire or is close to expiry # before a transaction is attempted. By default, the Swift storage # driver requests for a new token 60 seconds or less before the # current token expiration. # # Possible values: # * Zero # * Positive integer value # # Related Options: # * None # # (integer value) # Minimum value: 0 #swift_store_expire_soon_interval = 60 # # Use trusts for multi-tenant Swift store. # # This option instructs the Swift store to create a trust for each # add/get request when the multi-tenant store is in use. Using trusts # allows the Swift store to avoid problems that can be caused by an # authentication token expiring during the upload or download of data. # # By default, ``swift_store_use_trusts`` is set to ``True``(use of # trusts is enabled). If set to ``False``, a user token is used for # the Swift connection instead, eliminating the overhead of trust # creation. # # NOTE: This option is considered only when # ``swift_store_multi_tenant`` is set to ``True`` # # Possible values: # * True # * False # # Related options: # * swift_store_multi_tenant # # (boolean value) #swift_store_use_trusts = true # # Reference to default Swift account/backing store parameters. # # Provide a string value representing a reference to the default set # of parameters required for using swift account/backing store for # image storage. The default reference value for this configuration # option is 'ref1'. This configuration option dereferences the # parameters and facilitates image storage in Swift storage backend # every time a new image is added. # # Possible values: # * A valid string value # # Related options: # * None # # (string value) #default_swift_reference = ref1 # DEPRECATED: Version of the authentication service to use. Valid versions are 2 # and 3 for keystone and 1 (deprecated) for swauth and rackspace. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: # The option 'auth_version' in the Swift back-end configuration file is # used instead. #swift_store_auth_version = 2 # DEPRECATED: The address where the Swift authentication service is listening. # (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: # The option 'auth_address' in the Swift back-end configuration file is # used instead. #swift_store_auth_address = # DEPRECATED: The user to authenticate against the Swift authentication service. # (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: # The option 'user' in the Swift back-end configuration file is set instead. #swift_store_user = # DEPRECATED: Auth key for the user authenticating against the Swift # authentication service. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: # The option 'key' in the Swift back-end configuration file is used # to set the authentication key instead. #swift_store_key = # # Absolute path to the file containing the swift account(s) # configurations. # # Include a string value representing the path to a configuration # file that has references for each of the configured Swift # account(s)/backing stores. By default, no file path is specified # and customized Swift referencing is disabled. Configuring this # option is highly recommended while using Swift storage backend for # image storage as it avoids storage of credentials in the database. # # Possible values: # * String value representing an absolute path on the glance-api # node # # Related options: # * None # # (string value) #swift_store_config_file = # # Address of the ESX/ESXi or vCenter Server target system. # # This configuration option sets the address of the ESX/ESXi or vCenter # Server target system. This option is required when using the VMware # storage backend. The address can contain an IP address (127.0.0.1) or # a DNS name (www.my-domain.com). # # Possible Values: # * A valid IPv4 or IPv6 address # * A valid DNS name # # Related options: # * vmware_server_username # * vmware_server_password # # (string value) #vmware_server_host = 127.0.0.1 # # Server username. # # This configuration option takes the username for authenticating with # the VMware ESX/ESXi or vCenter Server. This option is required when # using the VMware storage backend. # # Possible Values: # * Any string that is the username for a user with appropriate # privileges # # Related options: # * vmware_server_host # * vmware_server_password # # (string value) #vmware_server_username = root # # Server password. # # This configuration option takes the password for authenticating with # the VMware ESX/ESXi or vCenter Server. This option is required when # using the VMware storage backend. # # Possible Values: # * Any string that is a password corresponding to the username # specified using the "vmware_server_username" option # # Related options: # * vmware_server_host # * vmware_server_username # # (string value) #vmware_server_password = vmware # # The number of VMware API retries. # # This configuration option specifies the number of times the VMware # ESX/VC server API must be retried upon connection related issues or # server API call overload. It is not possible to specify 'retry # forever'. # # Possible Values: # * Any positive integer value # # Related options: # * None # # (integer value) # Minimum value: 1 #vmware_api_retry_count = 10 # # Interval in seconds used for polling remote tasks invoked on VMware # ESX/VC server. # # This configuration option takes in the sleep time in seconds for polling an # on-going async task as part of the VMWare ESX/VC server API call. # # Possible Values: # * Any positive integer value # # Related options: # * None # # (integer value) # Minimum value: 1 #vmware_task_poll_interval = 5 # # The directory where the glance images will be stored in the datastore. # # This configuration option specifies the path to the directory where the # glance images will be stored in the VMware datastore. If this option # is not set, the default directory where the glance images are stored # is openstack_glance. # # Possible Values: # * Any string that is a valid path to a directory # # Related options: # * None # # (string value) #vmware_store_image_dir = /openstack_glance # # Set verification of the ESX/vCenter server certificate. # # This configuration option takes a boolean value to determine # whether or not to verify the ESX/vCenter server certificate. If this # option is set to True, the ESX/vCenter server certificate is not # verified. If this option is set to False, then the default CA # truststore is used for verification. # # This option is ignored if the "vmware_ca_file" option is set. In that # case, the ESX/vCenter server certificate will then be verified using # the file specified using the "vmware_ca_file" option . # # Possible Values: # * True # * False # # Related options: # * vmware_ca_file # # (boolean value) # Deprecated group/name - [glance_store]/vmware_api_insecure #vmware_insecure = false # # Absolute path to the CA bundle file. # # This configuration option enables the operator to use a custom # Cerificate Authority File to verify the ESX/vCenter certificate. # # If this option is set, the "vmware_insecure" option will be ignored # and the CA file specified will be used to authenticate the ESX/vCenter # server certificate and establish a secure connection to the server. # # Possible Values: # * Any string that is a valid absolute path to a CA file # # Related options: # * vmware_insecure # # (string value) #vmware_ca_file = /etc/ssl/certs/ca-certificates.crt # # The datastores where the image can be stored. # # This configuration option specifies the datastores where the image can # be stored in the VMWare store backend. This option may be specified # multiple times for specifying multiple datastores. The datastore name # should be specified after its datacenter path, separated by ":". An # optional weight may be given after the datastore name, separated again # by ":" to specify the priority. Thus, the required format becomes # ::. # # When adding an image, the datastore with highest weight will be # selected, unless there is not enough free space available in cases # where the image size is already known. If no weight is given, it is # assumed to be zero and the directory will be considered for selection # last. If multiple datastores have the same weight, then the one with # the most free space available is selected. # # Possible Values: # * Any string of the format: # :: # # Related options: # * None # # (multi valued) #vmware_datastores = [keystone_authtoken] # # From keystonemiddleware.auth_token # # Complete "public" Identity API endpoint. This endpoint should not be an # "admin" endpoint, as it should be accessible by all end users. Unauthenticated # clients are redirected to this endpoint to authenticate. Although this # endpoint should ideally be unversioned, client support in the wild varies. # If you're using a versioned v2 endpoint here, then this should *not* be the # same endpoint the service user utilizes for validating tokens, because normal # end users may not be able to reach that endpoint. (string value) #auth_uri = # API version of the admin Identity API endpoint. (string value) #auth_version = # Do not handle authorization requests within the middleware, but delegate the # authorization decision to downstream WSGI components. (boolean value) #delay_auth_decision = false # Request timeout value for communicating with Identity API server. (integer # value) #http_connect_timeout = # How many times are we trying to reconnect when communicating with Identity API # Server. (integer value) #http_request_max_retries = 3 # Request environment key where the Swift cache object is stored. When # auth_token middleware is deployed with a Swift cache, use this option to have # the middleware share a caching backend with swift. Otherwise, use the # ``memcached_servers`` option instead. (string value) #cache = # Required if identity server requires client certificate (string value) #certfile = # Required if identity server requires client certificate (string value) #keyfile = # A PEM encoded Certificate Authority to use when verifying HTTPs connections. # Defaults to system CAs. (string value) #cafile = # Verify HTTPS connections. (boolean value) #insecure = false # The region in which the identity server can be found. (string value) #region_name = # Directory used to cache files related to PKI tokens. (string value) #signing_dir = # Optionally specify a list of memcached server(s) to use for caching. If left # undefined, tokens will instead be cached in-process. (list value) # Deprecated group/name - [keystone_authtoken]/memcache_servers #memcached_servers = # In order to prevent excessive effort spent validating tokens, the middleware # caches previously-seen tokens for a configurable duration (in seconds). Set to # -1 to disable caching completely. (integer value) #token_cache_time = 300 # Determines the frequency at which the list of revoked tokens is retrieved from # the Identity service (in seconds). A high number of revocation events combined # with a low cache duration may significantly reduce performance. Only valid for # PKI tokens. (integer value) #revocation_cache_time = 10 # (Optional) If defined, indicate whether token data should be authenticated or # authenticated and encrypted. If MAC, token data is authenticated (with HMAC) # in the cache. If ENCRYPT, token data is encrypted and authenticated in the # cache. If the value is not one of these options or empty, auth_token will # raise an exception on initialization. (string value) # Allowed values: None, MAC, ENCRYPT #memcache_security_strategy = None # (Optional, mandatory if memcache_security_strategy is defined) This string is # used for key derivation. (string value) #memcache_secret_key = # (Optional) Number of seconds memcached server is considered dead before it is # tried again. (integer value) #memcache_pool_dead_retry = 300 # (Optional) Maximum total number of open connections to every memcached server. # (integer value) #memcache_pool_maxsize = 10 # (Optional) Socket timeout in seconds for communicating with a memcached # server. (integer value) #memcache_pool_socket_timeout = 3 # (Optional) Number of seconds a connection to memcached is held unused in the # pool before it is closed. (integer value) #memcache_pool_unused_timeout = 60 # (Optional) Number of seconds that an operation will wait to get a memcached # client connection from the pool. (integer value) #memcache_pool_conn_get_timeout = 10 # (Optional) Use the advanced (eventlet safe) memcached client pool. The # advanced pool will only work under python 2.x. (boolean value) #memcache_use_advanced_pool = false # (Optional) Indicate whether to set the X-Service-Catalog header. If False, # middleware will not ask for service catalog on token validation and will not # set the X-Service-Catalog header. (boolean value) #include_service_catalog = true # Used to control the use and type of token binding. Can be set to: "disabled" # to not check token binding. "permissive" (default) to validate binding # information if the bind type is of a form known to the server and ignore it if # not. "strict" like "permissive" but if the bind type is unknown the token will # be rejected. "required" any form of token binding is needed to be allowed. # Finally the name of a binding method that must be present in tokens. (string # value) #enforce_token_bind = permissive # If true, the revocation list will be checked for cached tokens. This requires # that PKI tokens are configured on the identity server. (boolean value) #check_revocations_for_cached = false # Hash algorithms to use for hashing PKI tokens. This may be a single algorithm # or multiple. The algorithms are those supported by Python standard # hashlib.new(). The hashes will be tried in the order given, so put the # preferred one first for performance. The result of the first hash will be # stored in the cache. This will typically be set to multiple values only while # migrating from a less secure algorithm to a more secure one. Once all the old # tokens are expired this option should be set to a single value for better # performance. (list value) #hash_algorithms = md5 # Authentication type to load (string value) # Deprecated group/name - [keystone_authtoken]/auth_plugin #auth_type = # Config Section from which to load plugin specific options (string value) #auth_section = [paste_deploy] # # From glance.glare # # # Deployment flavor to use in the server application pipeline. # # Provide a string value representing the appropriate deployment # flavor used in the server application pipleline. This is typically # the partial name of a pipeline in the paste configuration file with # the service name removed. # # For example, if your paste section name in the paste configuration # file is [pipeline:glance-api-keystone], set ``flavor`` to # ``keystone``. # # Possible values: # * String value representing a partial pipeline name. # # Related Options: # * config_file # # (string value) #flavor = keystone # # Name of the paste configuration file. # # Provide a string value representing the name of the paste # configuration file to use for configuring piplelines for # server application deployments. # # NOTES: # * Provide the name or the path relative to the glance directory # for the paste configuration file and not the absolute path. # * The sample paste configuration file shipped with Glance need # not be edited in most cases as it comes with ready-made # pipelines for all common deployment flavors. # # If no value is specified for this option, the ``paste.ini`` file # with the prefix of the corresponding Glance service's configuration # file name will be searched for in the known configuration # directories. (For example, if this option is missing from or has no # value set in ``glance-api.conf``, the service will look for a file # named ``glance-api-paste.ini``.) If the paste configuration file is # not found, the service will not start. # # Possible values: # * A string value representing the name of the paste configuration # file. # # Related Options: # * flavor # # (string value) #config_file = glance-api-paste.ini [profiler] # # From glance.glare # # # Enables the profiling for all services on this node. Default value is False # (fully disable the profiling feature). # # Possible values: # # * True: Enables the feature # * False: Disables the feature. The profiling cannot be started via this # project # operations. If the profiling is triggered by another project, this project # part # will be empty. # (boolean value) # Deprecated group/name - [profiler]/profiler_enabled #enabled = false # # Enables SQL requests profiling in services. Default value is False (SQL # requests won't be traced). # # Possible values: # # * True: Enables SQL requests profiling. Each SQL query will be part of the # trace and can the be analyzed by how much time was spent for that. # * False: Disables SQL requests profiling. The spent time is only shown on a # higher level of operations. Single SQL queries cannot be analyzed this # way. # (boolean value) #trace_sqlalchemy = false # # Secret key(s) to use for encrypting context data for performance profiling. # This string value should have the following format: [,,...], # where each key is some random string. A user who triggers the profiling via # the REST API has to set one of these keys in the headers of the REST API call # to include profiling results of this node for this particular project. # # Both "enabled" flag and "hmac_keys" config options should be set to enable # profiling. Also, to generate correct profiling information across all services # at least one key needs to be consistent between OpenStack projects. This # ensures it can be used from client side to generate the trace, containing # information from all possible resources. (string value) #hmac_keys = SECRET_KEY # # Connection string for a notifier backend. Default value is messaging:// which # sets the notifier to oslo_messaging. # # Examples of possible values: # # * messaging://: use oslo_messaging driver for sending notifications. # (string value) #connection_string = messaging://