glance/etc/glance-scrubber.conf
Abhishek Kekane dbab664039 Refresh Glance example configs for Wallaby milestone 3
Change-Id: Ifc957de2bcf4d22c1b7cba31ce2b467df9d5aa85
2021-03-08 08:59:50 +00:00

2561 lines
81 KiB
Plaintext

[DEFAULT]
#
# From glance.scrubber
#
# DEPRECATED:
# Allow users to add additional/custom properties to images.
#
# Glance defines a standard set of properties (in its schema) that
# appear on every image. These properties are also known as
# ``base properties``. In addition to these properties, Glance
# allows users to add custom properties to images. These are known
# as ``additional properties``.
#
# By default, this configuration option is set to ``True`` and users
# are allowed to add additional properties. The number of additional
# properties that can be added to an image can be controlled via
# ``image_property_quota`` configuration option.
#
# Possible values:
# * True
# * False
#
# Related options:
# * image_property_quota
#
# (boolean value)
# This option is deprecated for removal since Ussuri.
# Its value may be silently ignored in the future.
# Reason:
# This option is redundant. Control custom image property usage via the
# 'image_property_quota' configuration option. This option is scheduled
# to be removed during the Victoria development cycle.
#allow_additional_image_properties = true
#
# Secure hashing algorithm used for computing the 'os_hash_value' property.
#
# This option configures the Glance "multihash", which consists of two
# image properties: the 'os_hash_algo' and the 'os_hash_value'. The
# 'os_hash_algo' will be populated by the value of this configuration
# option, and the 'os_hash_value' will be populated by the hexdigest computed
# when the algorithm is applied to the uploaded or imported image data.
#
# The value must be a valid secure hash algorithm name recognized by the
# python 'hashlib' library. You can determine what these are by examining
# the 'hashlib.algorithms_available' data member of the version of the
# library being used in your Glance installation. For interoperability
# purposes, however, we recommend that you use the set of secure hash
# names supplied by the 'hashlib.algorithms_guaranteed' data member because
# those algorithms are guaranteed to be supported by the 'hashlib' library
# on all platforms. Thus, any image consumer using 'hashlib' locally should
# be able to verify the 'os_hash_value' of the image.
#
# The default value of 'sha512' is a performant secure hash algorithm.
#
# If this option is misconfigured, any attempts to store image data will fail.
# For that reason, we recommend using the default value.
#
# Possible values:
# * Any secure hash algorithm name recognized by the Python 'hashlib'
# library
#
# Related options:
# * None
#
# (string value)
#hashing_algorithm = sha512
#
# Maximum number of image members per image.
#
# This limits the maximum of users an image can be shared with. Any negative
# value is interpreted as unlimited.
#
# Related options:
# * None
#
# (integer value)
#image_member_quota = 128
#
# Maximum number of properties allowed on an image.
#
# This enforces an upper limit on the number of additional properties an image
# can have. Any negative value is interpreted as unlimited.
#
# NOTE: This won't have any impact if additional properties are disabled. Please
# refer to ``allow_additional_image_properties``.
#
# Related options:
# * ``allow_additional_image_properties``
#
# (integer value)
#image_property_quota = 128
#
# Maximum number of tags allowed on an image.
#
# Any negative value is interpreted as unlimited.
#
# Related options:
# * None
#
# (integer value)
#image_tag_quota = 128
#
# Maximum number of locations allowed on an image.
#
# Any negative value is interpreted as unlimited.
#
# Related options:
# * None
#
# (integer value)
#image_location_quota = 10
#
# The default number of results to return for a request.
#
# Responses to certain API requests, like list images, may return
# multiple items. The number of results returned can be explicitly
# controlled by specifying the ``limit`` parameter in the API request.
# However, if a ``limit`` parameter is not specified, this
# configuration value will be used as the default number of results to
# be returned for any API request.
#
# NOTES:
# * The value of this configuration option may not be greater than
# the value specified by ``api_limit_max``.
# * Setting this to a very large value may slow down database
# queries and increase response times. Setting this to a
# very low value may result in poor user experience.
#
# Possible values:
# * Any positive integer
#
# Related options:
# * api_limit_max
#
# (integer value)
# Minimum value: 1
#limit_param_default = 25
#
# Maximum number of results that could be returned by a request.
#
# As described in the help text of ``limit_param_default``, some
# requests may return multiple results. The number of results to be
# returned are governed either by the ``limit`` parameter in the
# request or the ``limit_param_default`` configuration option.
# The value in either case, can't be greater than the absolute maximum
# defined by this configuration option. Anything greater than this
# value is trimmed down to the maximum value defined here.
#
# NOTE: Setting this to a very large value may slow down database
# queries and increase response times. Setting this to a
# very low value may result in poor user experience.
#
# Possible values:
# * Any positive integer
#
# Related options:
# * limit_param_default
#
# (integer value)
# Minimum value: 1
#api_limit_max = 1000
#
# Show direct image location when returning an image.
#
# This configuration option indicates whether to show the direct image
# location when returning image details to the user. The direct image
# location is where the image data is stored in backend storage. This
# image location is shown under the image property ``direct_url``.
#
# When multiple image locations exist for an image, the best location
# is displayed based on the location strategy indicated by the
# configuration option ``location_strategy``.
#
# NOTES:
# * Revealing image locations can present a GRAVE SECURITY RISK as
# image locations can sometimes include credentials. Hence, this
# is set to ``False`` by default. Set this to ``True`` with
# EXTREME CAUTION and ONLY IF you know what you are doing!
# * If an operator wishes to avoid showing any image location(s)
# to the user, then both this option and
# ``show_multiple_locations`` MUST be set to ``False``.
#
# Possible values:
# * True
# * False
#
# Related options:
# * show_multiple_locations
# * location_strategy
#
# (boolean value)
#show_image_direct_url = false
# DEPRECATED:
# Show all image locations when returning an image.
#
# This configuration option indicates whether to show all the image
# locations when returning image details to the user. When multiple
# image locations exist for an image, the locations are ordered based
# on the location strategy indicated by the configuration opt
# ``location_strategy``. The image locations are shown under the
# image property ``locations``.
#
# NOTES:
# * Revealing image locations can present a GRAVE SECURITY RISK as
# image locations can sometimes include credentials. Hence, this
# is set to ``False`` by default. Set this to ``True`` with
# EXTREME CAUTION and ONLY IF you know what you are doing!
# * See https://wiki.openstack.org/wiki/OSSN/OSSN-0065 for more
# information.
# * If an operator wishes to avoid showing any image location(s)
# to the user, then both this option and
# ``show_image_direct_url`` MUST be set to ``False``.
#
# Possible values:
# * True
# * False
#
# Related options:
# * show_image_direct_url
# * location_strategy
#
# (boolean value)
# This option is deprecated for removal since Newton.
# Its value may be silently ignored in the future.
# Reason: Use of this option, deprecated since Newton, is a security risk and
# will be removed once we figure out a way to satisfy those use cases that
# currently require it. An earlier announcement that the same functionality can
# be achieved with greater granularity by using policies is incorrect. You
# cannot work around this option via policy configuration at the present time,
# though that is the direction we believe the fix will take. Please keep an eye
# on the Glance release notes to stay up to date on progress in addressing this
# issue.
#show_multiple_locations = false
#
# Maximum size of image a user can upload in bytes.
#
# An image upload greater than the size mentioned here would result
# in an image creation failure. This configuration option defaults to
# 1099511627776 bytes (1 TiB).
#
# NOTES:
# * This value should only be increased after careful
# consideration and must be set less than or equal to
# 8 EiB (9223372036854775808).
# * This value must be set with careful consideration of the
# backend storage capacity. Setting this to a very low value
# may result in a large number of image failures. And, setting
# this to a very large value may result in faster consumption
# of storage. Hence, this must be set according to the nature of
# images created and storage capacity available.
#
# Possible values:
# * Any positive number less than or equal to 9223372036854775808
#
# (integer value)
# Minimum value: 1
# Maximum value: 9223372036854775808
#image_size_cap = 1099511627776
#
# Maximum amount of image storage per tenant.
#
# This enforces an upper limit on the cumulative storage consumed by all images
# of a tenant across all stores. This is a per-tenant limit.
#
# The default unit for this configuration option is Bytes. However, storage
# units can be specified using case-sensitive literals ``B``, ``KB``, ``MB``,
# ``GB`` and ``TB`` representing Bytes, KiloBytes, MegaBytes, GigaBytes and
# TeraBytes respectively. Note that there should not be any space between the
# value and unit. Value ``0`` signifies no quota enforcement. Negative values
# are invalid and result in errors.
#
# Possible values:
# * A string that is a valid concatenation of a non-negative integer
# representing the storage value and an optional string literal
# representing storage units as mentioned above.
#
# Related options:
# * None
#
# (string value)
#user_storage_quota = 0
#
# Host address of the pydev server.
#
# Provide a string value representing the hostname or IP of the
# pydev server to use for debugging. The pydev server listens for
# debug connections on this address, facilitating remote debugging
# in Glance.
#
# Possible values:
# * Valid hostname
# * Valid IP address
#
# Related options:
# * None
#
# (host address value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#pydev_worker_debug_host = localhost
#
# Port number that the pydev server will listen on.
#
# Provide a port number to bind the pydev server to. The pydev
# process accepts debug connections on this port and facilitates
# remote debugging in Glance.
#
# Possible values:
# * A valid port number
#
# Related options:
# * None
#
# (port value)
# Minimum value: 0
# Maximum value: 65535
#pydev_worker_debug_port = 5678
#
# AES key for encrypting store location metadata.
#
# Provide a string value representing the AES cipher to use for
# encrypting Glance store metadata.
#
# NOTE: The AES key to use must be set to a random string of length
# 16, 24 or 32 bytes.
#
# Possible values:
# * String value representing a valid AES key
#
# Related options:
# * None
#
# (string value)
#metadata_encryption_key = <None>
#
# Digest algorithm to use for digital signature.
#
# Provide a string value representing the digest algorithm to
# use for generating digital signatures. By default, ``sha256``
# is used.
#
# To get a list of the available algorithms supported by the version
# of OpenSSL on your platform, run the command:
# ``openssl list-message-digest-algorithms``.
# Examples are 'sha1', 'sha256', and 'sha512'.
#
# NOTE: ``digest_algorithm`` is not related to Glance's image signing
# and verification. It is only used to sign the universally unique
# identifier (UUID) as a part of the certificate file and key file
# validation.
#
# Possible values:
# * An OpenSSL message digest algorithm identifier
#
# Relation options:
# * None
#
# (string value)
#digest_algorithm = sha256
#
# The URL provides location where the temporary data will be stored
#
# This option is for Glance internal use only. Glance will save the
# image data uploaded by the user to 'staging' endpoint during the
# image import process.
#
# This option does not change the 'staging' API endpoint by any means.
#
# NOTE: It is discouraged to use same path as [task]/work_dir
#
# NOTE: 'file://<absolute-directory-path>' is the only option
# api_image_import flow will support for now.
#
# NOTE: The staging path must be on shared filesystem available to all
# Glance API nodes.
#
# Possible values:
# * String starting with 'file://' followed by absolute FS path
#
# Related options:
# * [task]/work_dir
#
# (string value)
#node_staging_uri = file:///tmp/staging/
#
# List of enabled Image Import Methods
#
# 'glance-direct', 'copy-image' and 'web-download' are enabled by default.
#
# Related options:
# * [DEFAULT]/node_staging_uri (list value)
#enabled_import_methods = [glance-direct,web-download,copy-image]
# DEPRECATED:
# Enforce API access based on common persona definitions used across OpenStack.
# Enabling this option formalizes project-specific read/write operations, like
# creating private images or updating the status of shared image, behind the
# `member` role. It also formalizes a read-only variant useful for
# project-specific API operations, like listing private images in a project,
# behind the `reader` role.
#
# Operators should take an opportunity to understand glance's new image
# policies,
# audit assignments in their deployment, and update permissions using the
# default
# roles in keystone (e.g., `admin`, `member`, and `reader`).
#
# Related options:
# * [oslo_policy]/enforce_new_defaults
# (boolean value)
# This option is deprecated for removal since Wallaby.
# Its value may be silently ignored in the future.
# Reason:
# This option has been introduced to require operators to opt into enforcing
# authorization based on common RBAC personas, which is EXPERIMENTAL as of the
# Wallaby release. This behavior will be the default and STABLE in a future
# release, allowing this option to be removed.
#enforce_secure_rbac = false
#
# The URL to this worker.
#
# If this is set, other glance workers will know how to contact this one
# directly if needed. For image import, a single worker stages the image
# and other workers need to be able to proxy the import request to the
# right one.
#
# If unset, this will be considered to be `public_endpoint`, which
# normally would be set to the same value on all workers, effectively
# disabling the proxying behavior.
#
# Possible values:
# * A URL by which this worker is reachable from other workers
#
# Related options:
# * public_endpoint
#
# (string value)
#worker_self_reference_url = <None>
#
# The amount of time, in seconds, to delay image scrubbing.
#
# When delayed delete is turned on, an image is put into ``pending_delete``
# state upon deletion until the scrubber deletes its image data. Typically, soon
# after the image is put into ``pending_delete`` state, it is available for
# scrubbing. However, scrubbing can be delayed until a later point using this
# configuration option. This option denotes the time period an image spends in
# ``pending_delete`` state before it is available for scrubbing.
#
# It is important to realize that this has storage implications. The larger the
# ``scrub_time``, the longer the time to reclaim backend storage from deleted
# images.
#
# Possible values:
# * Any non-negative integer
#
# Related options:
# * ``delayed_delete``
#
# (integer value)
# Minimum value: 0
#scrub_time = 0
#
# The size of thread pool to be used for scrubbing images.
#
# When there are a large number of images to scrub, it is beneficial to scrub
# images in parallel so that the scrub queue stays in control and the backend
# storage is reclaimed in a timely fashion. This configuration option denotes
# the maximum number of images to be scrubbed in parallel. The default value is
# one, which signifies serial scrubbing. Any value above one indicates parallel
# scrubbing.
#
# Possible values:
# * Any non-zero positive integer
#
# Related options:
# * ``delayed_delete``
#
# (integer value)
# Minimum value: 1
#scrub_pool_size = 1
#
# Turn on/off delayed delete.
#
# Typically when an image is deleted, the ``glance-api`` service puts the image
# into ``deleted`` state and deletes its data at the same time. Delayed delete
# is a feature in Glance that delays the actual deletion of image data until a
# later point in time (as determined by the configuration option
# ``scrub_time``).
# When delayed delete is turned on, the ``glance-api`` service puts the image
# into ``pending_delete`` state upon deletion and leaves the image data in the
# storage backend for the image scrubber to delete at a later time. The image
# scrubber will move the image into ``deleted`` state upon successful deletion
# of image data.
#
# NOTE: When delayed delete is turned on, image scrubber MUST be running as a
# periodic task to prevent the backend storage from filling up with undesired
# usage.
#
# Possible values:
# * True
# * False
#
# Related options:
# * ``scrub_time``
# * ``wakeup_time``
# * ``scrub_pool_size``
#
# (boolean value)
#delayed_delete = false
#
# Time interval, in seconds, between scrubber runs in daemon mode.
#
# Scrubber can be run either as a cron job or daemon. When run as a daemon, this
# configuration time specifies the time period between two runs. When the
# scrubber wakes up, it fetches and scrubs all ``pending_delete`` images that
# are available for scrubbing after taking ``scrub_time`` into consideration.
#
# If the wakeup time is set to a large number, there may be a large number of
# images to be scrubbed for each run. Also, this impacts how quickly the backend
# storage is reclaimed.
#
# Possible values:
# * Any non-negative integer
#
# Related options:
# * ``daemon``
# * ``delayed_delete``
#
# (integer value)
# Minimum value: 0
#wakeup_time = 300
#
# Run scrubber as a daemon.
#
# This boolean configuration option indicates whether scrubber should
# run as a long-running process that wakes up at regular intervals to
# scrub images. The wake up interval can be specified using the
# configuration option ``wakeup_time``.
#
# If this configuration option is set to ``False``, which is the
# default value, scrubber runs once to scrub images and exits. In this
# case, if the operator wishes to implement continuous scrubbing of
# images, scrubber needs to be scheduled as a cron job.
#
# Possible values:
# * True
# * False
#
# Related options:
# * ``wakeup_time``
#
# (boolean value)
#daemon = false
#
# Restore the image status from 'pending_delete' to 'active'.
#
# This option is used by administrator to reset the image's status from
# 'pending_delete' to 'active' when the image is deleted by mistake and
# 'pending delete' feature is enabled in Glance. Please make sure the
# glance-scrubber daemon is stopped before restoring the image to avoid image
# data inconsistency.
#
# Possible values:
# * image's uuid
#
# (string value)
#restore = <None>
#
# From oslo.log
#
# If set to true, the logging level will be set to DEBUG instead of the default
# INFO level. (boolean value)
# Note: This option can be changed without restarting.
#debug = false
# The name of a logging configuration file. This file is appended to any
# existing logging configuration files. For details about logging configuration
# files, see the Python logging module documentation. Note that when logging
# configuration files are used then all logging configuration is set in the
# configuration file and other logging configuration options are ignored (for
# example, log-date-format). (string value)
# Note: This option can be changed without restarting.
# Deprecated group/name - [DEFAULT]/log_config
#log_config_append = <None>
# Defines the format string for %%(asctime)s in log records. Default:
# %(default)s . This option is ignored if log_config_append is set. (string
# value)
#log_date_format = %Y-%m-%d %H:%M:%S
# (Optional) Name of log file to send logging output to. If no default is set,
# logging will go to stderr as defined by use_stderr. This option is ignored if
# log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logfile
#log_file = <None>
# (Optional) The base directory used for relative log_file paths. This option
# is ignored if log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logdir
#log_dir = <None>
# Uses logging handler designed to watch file system. When log file is moved or
# removed this handler will open a new log file with specified path
# instantaneously. It makes sense only if log_file option is specified and Linux
# platform is used. This option is ignored if log_config_append is set. (boolean
# value)
#watch_log_file = false
# Use syslog for logging. Existing syslog format is DEPRECATED and will be
# changed later to honor RFC5424. This option is ignored if log_config_append is
# set. (boolean value)
#use_syslog = false
# Enable journald for logging. If running in a systemd environment you may wish
# to enable journal support. Doing so will use the journal native protocol which
# includes structured metadata in addition to log messages.This option is
# ignored if log_config_append is set. (boolean value)
#use_journal = false
# Syslog facility to receive log lines. This option is ignored if
# log_config_append is set. (string value)
#syslog_log_facility = LOG_USER
# Use JSON formatting for logging. This option is ignored if log_config_append
# is set. (boolean value)
#use_json = false
# Log output to standard error. This option is ignored if log_config_append is
# set. (boolean value)
#use_stderr = false
# Log output to Windows Event Log. (boolean value)
#use_eventlog = false
# The amount of time before the log files are rotated. This option is ignored
# unless log_rotation_type is setto "interval". (integer value)
#log_rotate_interval = 1
# Rotation interval type. The time of the last file change (or the time when the
# service was started) is used when scheduling the next rotation. (string value)
# Possible values:
# Seconds - <No description provided>
# Minutes - <No description provided>
# Hours - <No description provided>
# Days - <No description provided>
# Weekday - <No description provided>
# Midnight - <No description provided>
#log_rotate_interval_type = days
# Maximum number of rotated log files. (integer value)
#max_logfile_count = 30
# Log file maximum size in MB. This option is ignored if "log_rotation_type" is
# not set to "size". (integer value)
#max_logfile_size_mb = 200
# Log rotation type. (string value)
# Possible values:
# interval - Rotate logs at predefined time intervals.
# size - Rotate logs once they reach a predefined size.
# none - Do not rotate log files.
#log_rotation_type = none
# Format string to use for log messages with context. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
# Format string to use for log messages when context is undefined. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
# Additional data to append to log message when logging level for the message is
# DEBUG. Used by oslo_log.formatters.ContextFormatter (string value)
#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
# Prefix each line of exception output with this format. Used by
# oslo_log.formatters.ContextFormatter (string value)
#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
# Defines the format string for %(user_identity)s that is used in
# logging_context_format_string. Used by oslo_log.formatters.ContextFormatter
# (string value)
#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
# List of package logging levels in logger=LEVEL pairs. This option is ignored
# if log_config_append is set. (list value)
#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,oslo_policy=INFO,dogpile.core.dogpile=INFO
# Enables or disables publication of error events. (boolean value)
#publish_errors = false
# The format for an instance that is passed with the log message. (string value)
#instance_format = "[instance: %(uuid)s] "
# The format for an instance UUID that is passed with the log message. (string
# value)
#instance_uuid_format = "[instance: %(uuid)s] "
# Interval, number of seconds, of log rate limiting. (integer value)
#rate_limit_interval = 0
# Maximum number of logged messages per rate_limit_interval. (integer value)
#rate_limit_burst = 0
# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or
# empty string. Logs with level greater or equal to rate_limit_except_level are
# not filtered. An empty string means that all levels are filtered. (string
# value)
#rate_limit_except_level = CRITICAL
# Enables or disables fatal status of deprecations. (boolean value)
#fatal_deprecations = false
[database]
#
# From oslo.db
#
# If True, SQLite uses synchronous mode. (boolean value)
#sqlite_synchronous = true
# The back end to use for the database. (string value)
# Deprecated group/name - [DEFAULT]/db_backend
#backend = sqlalchemy
# The SQLAlchemy connection string to use to connect to the database. (string
# value)
# Deprecated group/name - [DEFAULT]/sql_connection
# Deprecated group/name - [DATABASE]/sql_connection
# Deprecated group/name - [sql]/connection
#connection = <None>
# The SQLAlchemy connection string to use to connect to the slave database.
# (string value)
#slave_connection = <None>
# The SQL mode to be used for MySQL sessions. This option, including the
# default, overrides any server-set SQL mode. To use whatever SQL mode is set by
# the server configuration, set this to no value. Example: mysql_sql_mode=
# (string value)
#mysql_sql_mode = TRADITIONAL
# If True, transparently enables support for handling MySQL Cluster (NDB).
# (boolean value)
#mysql_enable_ndb = false
# Connections which have been present in the connection pool longer than this
# number of seconds will be replaced with a new one the next time they are
# checked out from the pool. (integer value)
# Deprecated group/name - [DATABASE]/idle_timeout
# Deprecated group/name - [database]/idle_timeout
# Deprecated group/name - [DEFAULT]/sql_idle_timeout
# Deprecated group/name - [DATABASE]/sql_idle_timeout
# Deprecated group/name - [sql]/idle_timeout
#connection_recycle_time = 3600
# Maximum number of SQL connections to keep open in a pool. Setting a value of 0
# indicates no limit. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_pool_size
# Deprecated group/name - [DATABASE]/sql_max_pool_size
#max_pool_size = 5
# Maximum number of database connection retries during startup. Set to -1 to
# specify an infinite retry count. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_retries
# Deprecated group/name - [DATABASE]/sql_max_retries
#max_retries = 10
# Interval between retries of opening a SQL connection. (integer value)
# Deprecated group/name - [DEFAULT]/sql_retry_interval
# Deprecated group/name - [DATABASE]/reconnect_interval
#retry_interval = 10
# If set, use this value for max_overflow with SQLAlchemy. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_overflow
# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
#max_overflow = 50
# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
# value)
# Minimum value: 0
# Maximum value: 100
# Deprecated group/name - [DEFAULT]/sql_connection_debug
#connection_debug = 0
# Add Python stack traces to SQL as comment strings. (boolean value)
# Deprecated group/name - [DEFAULT]/sql_connection_trace
#connection_trace = false
# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
#pool_timeout = <None>
# Enable the experimental use of database reconnect on connection lost. (boolean
# value)
#use_db_reconnect = false
# Seconds between retries of a database transaction. (integer value)
#db_retry_interval = 1
# If True, increases the interval between retries of a database operation up to
# db_max_retry_interval. (boolean value)
#db_inc_retry_interval = true
# If db_inc_retry_interval is set, the maximum seconds between retries of a
# database operation. (integer value)
#db_max_retry_interval = 10
# Maximum retries in case of connection error or deadlock error before error is
# raised. Set to -1 to specify an infinite retry count. (integer value)
#db_max_retries = 20
# Optional URL parameters to append onto the connection URL at connect time;
# specify as param1=value1&param2=value2&... (string value)
#connection_parameters =
#
# From oslo.db.concurrency
#
# Enable the experimental use of thread pooling for all DB API calls (boolean
# value)
# Deprecated group/name - [DEFAULT]/dbapi_use_tpool
#use_tpool = false
[glance_store]
#
# From glance.store
#
# DEPRECATED:
# List of enabled Glance stores.
#
# Register the storage backends to use for storing disk images
# as a comma separated list. The default stores enabled for
# storing disk images with Glance are ``file`` and ``http``.
#
# Possible values:
# * A comma separated list that could include:
# * file
# * http
# * swift
# * rbd
# * cinder
# * vmware
# * s3
#
# Related Options:
# * default_store
#
# (list value)
# This option is deprecated for removal since Rocky.
# Its value may be silently ignored in the future.
# Reason:
# This option is deprecated against new config option
# ``enabled_backends`` which helps to configure multiple backend stores
# of different schemes.
#
# This option is scheduled for removal in the U development
# cycle.
#stores = file,http
# DEPRECATED:
# The default scheme to use for storing images.
#
# Provide a string value representing the default scheme to use for
# storing images. If not set, Glance uses ``file`` as the default
# scheme to store images with the ``file`` store.
#
# NOTE: The value given for this configuration option must be a valid
# scheme for a store registered with the ``stores`` configuration
# option.
#
# Possible values:
# * file
# * filesystem
# * http
# * https
# * swift
# * swift+http
# * swift+https
# * swift+config
# * rbd
# * cinder
# * vsphere
# * s3
#
# Related Options:
# * stores
#
# (string value)
# Possible values:
# file - <No description provided>
# filesystem - <No description provided>
# http - <No description provided>
# https - <No description provided>
# swift - <No description provided>
# swift+http - <No description provided>
# swift+https - <No description provided>
# swift+config - <No description provided>
# rbd - <No description provided>
# cinder - <No description provided>
# vsphere - <No description provided>
# s3 - <No description provided>
# This option is deprecated for removal since Rocky.
# Its value may be silently ignored in the future.
# Reason:
# This option is deprecated against new config option
# ``default_backend`` which acts similar to ``default_store`` config
# option.
#
# This option is scheduled for removal in the U development
# cycle.
#default_store = file
#
# Information to match when looking for cinder in the service catalog.
#
# When the ``cinder_endpoint_template`` is not set and any of
# ``cinder_store_auth_address``, ``cinder_store_user_name``,
# ``cinder_store_project_name``, ``cinder_store_password`` is not set,
# cinder store uses this information to lookup cinder endpoint from the service
# catalog in the current context. ``cinder_os_region_name``, if set, is taken
# into consideration to fetch the appropriate endpoint.
#
# The service catalog can be listed by the ``openstack catalog list`` command.
#
# Possible values:
# * A string of of the following form:
# ``<service_type>:<service_name>:<interface>``
# At least ``service_type`` and ``interface`` should be specified.
# ``service_name`` can be omitted.
#
# Related options:
# * cinder_os_region_name
# * cinder_endpoint_template
# * cinder_store_auth_address
# * cinder_store_user_name
# * cinder_store_project_name
# * cinder_store_password
#
# (string value)
#cinder_catalog_info = volumev3::publicURL
#
# Override service catalog lookup with template for cinder endpoint.
#
# When this option is set, this value is used to generate cinder endpoint,
# instead of looking up from the service catalog.
# This value is ignored if ``cinder_store_auth_address``,
# ``cinder_store_user_name``, ``cinder_store_project_name``, and
# ``cinder_store_password`` are specified.
#
# If this configuration option is set, ``cinder_catalog_info`` will be ignored.
#
# Possible values:
# * URL template string for cinder endpoint, where ``%%(tenant)s`` is
# replaced with the current tenant (project) name.
# For example: ``http://cinder.openstack.example.org/v2/%%(tenant)s``
#
# Related options:
# * cinder_store_auth_address
# * cinder_store_user_name
# * cinder_store_project_name
# * cinder_store_password
# * cinder_catalog_info
#
# (string value)
#cinder_endpoint_template = <None>
#
# Region name to lookup cinder service from the service catalog.
#
# This is used only when ``cinder_catalog_info`` is used for determining the
# endpoint. If set, the lookup for cinder endpoint by this node is filtered to
# the specified region. It is useful when multiple regions are listed in the
# catalog. If this is not set, the endpoint is looked up from every region.
#
# Possible values:
# * A string that is a valid region name.
#
# Related options:
# * cinder_catalog_info
#
# (string value)
# Deprecated group/name - [glance_store]/os_region_name
#cinder_os_region_name = <None>
#
# Location of a CA certificates file used for cinder client requests.
#
# The specified CA certificates file, if set, is used to verify cinder
# connections via HTTPS endpoint. If the endpoint is HTTP, this value is
# ignored.
# ``cinder_api_insecure`` must be set to ``True`` to enable the verification.
#
# Possible values:
# * Path to a ca certificates file
#
# Related options:
# * cinder_api_insecure
#
# (string value)
#cinder_ca_certificates_file = <None>
#
# Number of cinderclient retries on failed http calls.
#
# When a call failed by any errors, cinderclient will retry the call up to the
# specified times after sleeping a few seconds.
#
# Possible values:
# * A positive integer
#
# Related options:
# * None
#
# (integer value)
# Minimum value: 0
#cinder_http_retries = 3
#
# Time period, in seconds, to wait for a cinder volume transition to
# complete.
#
# When the cinder volume is created, deleted, or attached to the glance node to
# read/write the volume data, the volume's state is changed. For example, the
# newly created volume status changes from ``creating`` to ``available`` after
# the creation process is completed. This specifies the maximum time to wait for
# the status change. If a timeout occurs while waiting, or the status is changed
# to an unexpected value (e.g. `error``), the image creation fails.
#
# Possible values:
# * A positive integer
#
# Related options:
# * None
#
# (integer value)
# Minimum value: 0
#cinder_state_transition_timeout = 300
#
# Allow to perform insecure SSL requests to cinder.
#
# If this option is set to True, HTTPS endpoint connection is verified using the
# CA certificates file specified by ``cinder_ca_certificates_file`` option.
#
# Possible values:
# * True
# * False
#
# Related options:
# * cinder_ca_certificates_file
#
# (boolean value)
#cinder_api_insecure = false
#
# The address where the cinder authentication service is listening.
#
# When all of ``cinder_store_auth_address``, ``cinder_store_user_name``,
# ``cinder_store_project_name``, and ``cinder_store_password`` options are
# specified, the specified values are always used for the authentication.
# This is useful to hide the image volumes from users by storing them in a
# project/tenant specific to the image service. It also enables users to share
# the image volume among other projects under the control of glance's ACL.
#
# If either of these options are not set, the cinder endpoint is looked up
# from the service catalog, and current context's user and project are used.
#
# Possible values:
# * A valid authentication service address, for example:
# ``http://openstack.example.org/identity/v2.0``
#
# Related options:
# * cinder_store_user_name
# * cinder_store_password
# * cinder_store_project_name
#
# (string value)
#cinder_store_auth_address = <None>
#
# User name to authenticate against cinder.
#
# This must be used with all the following related options. If any of these are
# not specified, the user of the current context is used.
#
# Possible values:
# * A valid user name
#
# Related options:
# * cinder_store_auth_address
# * cinder_store_password
# * cinder_store_project_name
#
# (string value)
#cinder_store_user_name = <None>
#
# Password for the user authenticating against cinder.
#
# This must be used with all the following related options. If any of these are
# not specified, the user of the current context is used.
#
# Possible values:
# * A valid password for the user specified by ``cinder_store_user_name``
#
# Related options:
# * cinder_store_auth_address
# * cinder_store_user_name
# * cinder_store_project_name
#
# (string value)
#cinder_store_password = <None>
#
# Project name where the image volume is stored in cinder.
#
# If this configuration option is not set, the project in current context is
# used.
#
# This must be used with all the following related options. If any of these are
# not specified, the project of the current context is used.
#
# Possible values:
# * A valid project name
#
# Related options:
# * ``cinder_store_auth_address``
# * ``cinder_store_user_name``
# * ``cinder_store_password``
#
# (string value)
#cinder_store_project_name = <None>
#
# Path to the rootwrap configuration file to use for running commands as root.
#
# The cinder store requires root privileges to operate the image volumes (for
# connecting to iSCSI/FC volumes and reading/writing the volume data, etc.).
# The configuration file should allow the required commands by cinder store and
# os-brick library.
#
# Possible values:
# * Path to the rootwrap config file
#
# Related options:
# * None
#
# (string value)
#rootwrap_config = /etc/glance/rootwrap.conf
#
# Volume type that will be used for volume creation in cinder.
#
# Some cinder backends can have several volume types to optimize storage usage.
# Adding this option allows an operator to choose a specific volume type
# in cinder that can be optimized for images.
#
# If this is not set, then the default volume type specified in the cinder
# configuration will be used for volume creation.
#
# Possible values:
# * A valid volume type from cinder
#
# Related options:
# * None
#
# NOTE: You cannot use an encrypted volume_type associated with an NFS backend.
# An encrypted volume stored on an NFS backend will raise an exception whenever
# glance_store tries to write or access image data stored in that volume.
# Consult your Cinder administrator to determine an appropriate volume_type.
#
# (string value)
#cinder_volume_type = <None>
#
# If this is set to True, attachment of volumes for image transfer will
# be aborted when multipathd is not running. Otherwise, it will fallback
# to single path.
#
# Possible values:
# * True or False
#
# Related options:
# * cinder_use_multipath
#
# (boolean value)
#cinder_enforce_multipath = false
#
# Flag to identify mutipath is supported or not in the deployment.
#
# Set it to False if multipath is not supported.
#
# Possible values:
# * True or False
#
# Related options:
# * cinder_enforce_multipath
#
# (boolean value)
#cinder_use_multipath = false
#
# Directory where the NFS volume is mounted on the glance node.
#
# Possible values:
#
# * A string representing absolute path of mount point.
# (string value)
#cinder_mount_point_base = /var/lib/glance/mnt
#
# Directory to which the filesystem backend store writes images.
#
# Upon start up, Glance creates the directory if it doesn't already
# exist and verifies write access to the user under which
# ``glance-api`` runs. If the write access isn't available, a
# ``BadStoreConfiguration`` exception is raised and the filesystem
# store may not be available for adding new images.
#
# NOTE: This directory is used only when filesystem store is used as a
# storage backend. Either ``filesystem_store_datadir`` or
# ``filesystem_store_datadirs`` option must be specified in
# ``glance-api.conf``. If both options are specified, a
# ``BadStoreConfiguration`` will be raised and the filesystem store
# may not be available for adding new images.
#
# Possible values:
# * A valid path to a directory
#
# Related options:
# * ``filesystem_store_datadirs``
# * ``filesystem_store_file_perm``
#
# (string value)
#filesystem_store_datadir = /var/lib/glance/images
#
# List of directories and their priorities to which the filesystem
# backend store writes images.
#
# The filesystem store can be configured to store images in multiple
# directories as opposed to using a single directory specified by the
# ``filesystem_store_datadir`` configuration option. When using
# multiple directories, each directory can be given an optional
# priority to specify the preference order in which they should
# be used. Priority is an integer that is concatenated to the
# directory path with a colon where a higher value indicates higher
# priority. When two directories have the same priority, the directory
# with most free space is used. When no priority is specified, it
# defaults to zero.
#
# More information on configuring filesystem store with multiple store
# directories can be found at
# https://docs.openstack.org/glance/latest/configuration/configuring.html
#
# NOTE: This directory is used only when filesystem store is used as a
# storage backend. Either ``filesystem_store_datadir`` or
# ``filesystem_store_datadirs`` option must be specified in
# ``glance-api.conf``. If both options are specified, a
# ``BadStoreConfiguration`` will be raised and the filesystem store
# may not be available for adding new images.
#
# Possible values:
# * List of strings of the following form:
# * ``<a valid directory path>:<optional integer priority>``
#
# Related options:
# * ``filesystem_store_datadir``
# * ``filesystem_store_file_perm``
#
# (multi valued)
#filesystem_store_datadirs =
#
# Filesystem store metadata file.
#
# The path to a file which contains the metadata to be returned with any
# location
# associated with the filesystem store. Once this option is set, it is used for
# new images created afterward only - previously existing images are not
# affected.
#
# The file must contain a valid JSON object. The object should contain the keys
# ``id`` and ``mountpoint``. The value for both keys should be a string.
#
# Possible values:
# * A valid path to the store metadata file
#
# Related options:
# * None
#
# (string value)
#filesystem_store_metadata_file = <None>
#
# File access permissions for the image files.
#
# Set the intended file access permissions for image data. This provides
# a way to enable other services, e.g. Nova, to consume images directly
# from the filesystem store. The users running the services that are
# intended to be given access to could be made a member of the group
# that owns the files created. Assigning a value less then or equal to
# zero for this configuration option signifies that no changes be made
# to the default permissions. This value will be decoded as an octal
# digit.
#
# For more information, please refer the documentation at
# https://docs.openstack.org/glance/latest/configuration/configuring.html
#
# Possible values:
# * A valid file access permission
# * Zero
# * Any negative integer
#
# Related options:
# * None
#
# (integer value)
#filesystem_store_file_perm = 0
#
# Chunk size, in bytes.
#
# The chunk size used when reading or writing image files. Raising this value
# may improve the throughput but it may also slightly increase the memory usage
# when handling a large number of requests.
#
# Possible Values:
# * Any positive integer value
#
# Related options:
# * None
#
# (integer value)
# Minimum value: 1
#filesystem_store_chunk_size = 65536
#
# Enable or not thin provisioning in this backend.
#
# This configuration option enable the feature of not really write null byte
# sequences on the filesystem, the holes who can appear will automatically
# be interpreted by the filesystem as null bytes, and do not really consume
# your storage.
# Enabling this feature will also speed up image upload and save network trafic
# in addition to save space in the backend, as null bytes sequences are not
# sent over the network.
#
# Possible Values:
# * True
# * False
#
# Related options:
# * None
#
# (boolean value)
#filesystem_thin_provisioning = false
#
# Path to the CA bundle file.
#
# This configuration option enables the operator to use a custom
# Certificate Authority file to verify the remote server certificate. If
# this option is set, the ``https_insecure`` option will be ignored and
# the CA file specified will be used to authenticate the server
# certificate and establish a secure connection to the server.
#
# Possible values:
# * A valid path to a CA file
#
# Related options:
# * https_insecure
#
# (string value)
#https_ca_certificates_file = <None>
#
# Set verification of the remote server certificate.
#
# This configuration option takes in a boolean value to determine
# whether or not to verify the remote server certificate. If set to
# True, the remote server certificate is not verified. If the option is
# set to False, then the default CA truststore is used for verification.
#
# This option is ignored if ``https_ca_certificates_file`` is set.
# The remote server certificate will then be verified using the file
# specified using the ``https_ca_certificates_file`` option.
#
# Possible values:
# * True
# * False
#
# Related options:
# * https_ca_certificates_file
#
# (boolean value)
#https_insecure = true
#
# The http/https proxy information to be used to connect to the remote
# server.
#
# This configuration option specifies the http/https proxy information
# that should be used to connect to the remote server. The proxy
# information should be a key value pair of the scheme and proxy, for
# example, http:10.0.0.1:3128. You can also specify proxies for multiple
# schemes by separating the key value pairs with a comma, for example,
# http:10.0.0.1:3128, https:10.0.0.1:1080.
#
# Possible values:
# * A comma separated list of scheme:proxy pairs as described above
#
# Related options:
# * None
#
# (dict value)
#http_proxy_information =
#
# Size, in megabytes, to chunk RADOS images into.
#
# Provide an integer value representing the size in megabytes to chunk
# Glance images into. The default chunk size is 8 megabytes. For optimal
# performance, the value should be a power of two.
#
# When Ceph's RBD object storage system is used as the storage backend
# for storing Glance images, the images are chunked into objects of the
# size set using this option. These chunked objects are then stored
# across the distributed block data store to use for Glance.
#
# Possible Values:
# * Any positive integer value
#
# Related options:
# * None
#
# (integer value)
# Minimum value: 1
#rbd_store_chunk_size = 8
#
# RADOS pool in which images are stored.
#
# When RBD is used as the storage backend for storing Glance images, the
# images are stored by means of logical grouping of the objects (chunks
# of images) into a ``pool``. Each pool is defined with the number of
# placement groups it can contain. The default pool that is used is
# 'images'.
#
# More information on the RBD storage backend can be found here:
# http://ceph.com/planet/how-data-is-stored-in-ceph-cluster/
#
# Possible Values:
# * A valid pool name
#
# Related options:
# * None
#
# (string value)
#rbd_store_pool = images
#
# RADOS user to authenticate as.
#
# This configuration option takes in the RADOS user to authenticate as.
# This is only needed when RADOS authentication is enabled and is
# applicable only if the user is using Cephx authentication. If the
# value for this option is not set by the user or is set to None, a
# default value will be chosen, which will be based on the client.
# section in rbd_store_ceph_conf.
#
# Possible Values:
# * A valid RADOS user
#
# Related options:
# * rbd_store_ceph_conf
#
# (string value)
#rbd_store_user = <None>
#
# Ceph configuration file path.
#
# This configuration option specifies the path to the Ceph configuration
# file to be used. If the value for this option is not set by the user
# or is set to the empty string, librados will read the standard ceph.conf
# file by searching the default Ceph configuration file locations in
# sequential order. See the Ceph documentation for details.
#
# NOTE: If using Cephx authentication, this file should include a reference
# to the right keyring in a client.<USER> section
#
# NOTE 2: If you leave this option empty (the default), the actual Ceph
# configuration file used may change depending on what version of librados
# is being used. If it is important for you to know exactly which configuration
# file is in effect, you may specify that file here using this option.
#
# Possible Values:
# * A valid path to a configuration file
#
# Related options:
# * rbd_store_user
#
# (string value)
#rbd_store_ceph_conf =
#
# Timeout value for connecting to Ceph cluster.
#
# This configuration option takes in the timeout value in seconds used
# when connecting to the Ceph cluster i.e. it sets the time to wait for
# glance-api before closing the connection. This prevents glance-api
# hangups during the connection to RBD. If the value for this option
# is set to less than or equal to 0, no timeout is set and the default
# librados value is used.
#
# Possible Values:
# * Any integer value
#
# Related options:
# * None
#
# (integer value)
#rados_connect_timeout = 0
#
# Enable or not thin provisioning in this backend.
#
# This configuration option enable the feature of not really write null byte
# sequences on the RBD backend, the holes who can appear will automatically
# be interpreted by Ceph as null bytes, and do not really consume your storage.
# Enabling this feature will also speed up image upload and save network trafic
# in addition to save space in the backend, as null bytes sequences are not
# sent over the network.
#
# Possible Values:
# * True
# * False
#
# Related options:
# * None
#
# (boolean value)
#rbd_thin_provisioning = false
#
# The host where the S3 server is listening.
#
# This configuration option sets the host of the S3 or S3 compatible storage
# Server. This option is required when using the S3 storage backend.
# The host can contain a DNS name (e.g. s3.amazonaws.com, my-object-storage.com)
# or an IP address (127.0.0.1).
#
# Possible values:
# * A valid DNS name
# * A valid IPv4 address
#
# Related Options:
# * s3_store_access_key
# * s3_store_secret_key
#
# (string value)
#s3_store_host = <None>
#
# The S3 query token access key.
#
# This configuration option takes the access key for authenticating with the
# Amazon S3 or S3 compatible storage server. This option is required when using
# the S3 storage backend.
#
# Possible values:
# * Any string value that is the access key for a user with appropriate
# privileges
#
# Related Options:
# * s3_store_host
# * s3_store_secret_key
#
# (string value)
#s3_store_access_key = <None>
#
# The S3 query token secret key.
#
# This configuration option takes the secret key for authenticating with the
# Amazon S3 or S3 compatible storage server. This option is required when using
# the S3 storage backend.
#
# Possible values:
# * Any string value that is a secret key corresponding to the access key
# specified using the ``s3_store_host`` option
#
# Related Options:
# * s3_store_host
# * s3_store_access_key
#
# (string value)
#s3_store_secret_key = <None>
#
# The S3 bucket to be used to store the Glance data.
#
# This configuration option specifies where the glance images will be stored
# in the S3. If ``s3_store_create_bucket_on_put`` is set to true, it will be
# created automatically even if the bucket does not exist.
#
# Possible values:
# * Any string value
#
# Related Options:
# * s3_store_create_bucket_on_put
# * s3_store_bucket_url_format
#
# (string value)
#s3_store_bucket = <None>
#
# Determine whether S3 should create a new bucket.
#
# This configuration option takes boolean value to indicate whether Glance
# should
# create a new bucket to S3 if it does not exist.
#
# Possible values:
# * Any Boolean value
#
# Related Options:
# * None
#
# (boolean value)
#s3_store_create_bucket_on_put = false
#
# The S3 calling format used to determine the object.
#
# This configuration option takes access model that is used to specify the
# address of an object in an S3 bucket.
#
# NOTE:
# In ``path``-style, the endpoint for the object looks like
# 'https://s3.amazonaws.com/bucket/example.img'.
# And in ``virtual``-style, the endpoint for the object looks like
# 'https://bucket.s3.amazonaws.com/example.img'.
# If you do not follow the DNS naming convention in the bucket name, you can
# get objects in the path style, but not in the virtual style.
#
# Possible values:
# * Any string value of ``auto``, ``virtual``, or ``path``
#
# Related Options:
# * s3_store_bucket
#
# (string value)
#s3_store_bucket_url_format = auto
#
# What size, in MB, should S3 start chunking image files and do a multipart
# upload in S3.
#
# This configuration option takes a threshold in MB to determine whether to
# upload the image to S3 as is or to split it (Multipart Upload).
#
# Note: You can only split up to 10,000 images.
#
# Possible values:
# * Any positive integer value
#
# Related Options:
# * s3_store_large_object_chunk_size
# * s3_store_thread_pools
#
# (integer value)
#s3_store_large_object_size = 100
#
# What multipart upload part size, in MB, should S3 use when uploading parts.
#
# This configuration option takes the image split size in MB for Multipart
# Upload.
#
# Note: You can only split up to 10,000 images.
#
# Possible values:
# * Any positive integer value (must be greater than or equal to 5M)
#
# Related Options:
# * s3_store_large_object_size
# * s3_store_thread_pools
#
# (integer value)
#s3_store_large_object_chunk_size = 10
#
# The number of thread pools to perform a multipart upload in S3.
#
# This configuration option takes the number of thread pools when performing a
# Multipart Upload.
#
# Possible values:
# * Any positive integer value
#
# Related Options:
# * s3_store_large_object_size
# * s3_store_large_object_chunk_size
#
# (integer value)
#s3_store_thread_pools = 10
#
# Set verification of the server certificate.
#
# This boolean determines whether or not to verify the server
# certificate. If this option is set to True, swiftclient won't check
# for a valid SSL certificate when authenticating. If the option is set
# to False, then the default CA truststore is used for verification.
#
# Possible values:
# * True
# * False
#
# Related options:
# * swift_store_cacert
#
# (boolean value)
#swift_store_auth_insecure = false
#
# Path to the CA bundle file.
#
# This configuration option enables the operator to specify the path to
# a custom Certificate Authority file for SSL verification when
# connecting to Swift.
#
# Possible values:
# * A valid path to a CA file
#
# Related options:
# * swift_store_auth_insecure
#
# (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#swift_store_cacert = /etc/ssl/certs/ca-certificates.crt
#
# The region of Swift endpoint to use by Glance.
#
# Provide a string value representing a Swift region where Glance
# can connect to for image storage. By default, there is no region
# set.
#
# When Glance uses Swift as the storage backend to store images
# for a specific tenant that has multiple endpoints, setting of a
# Swift region with ``swift_store_region`` allows Glance to connect
# to Swift in the specified region as opposed to a single region
# connectivity.
#
# This option can be configured for both single-tenant and
# multi-tenant storage.
#
# NOTE: Setting the region with ``swift_store_region`` is
# tenant-specific and is necessary ``only if`` the tenant has
# multiple endpoints across different regions.
#
# Possible values:
# * A string value representing a valid Swift region.
#
# Related Options:
# * None
#
# (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#swift_store_region = RegionTwo
#
# The URL endpoint to use for Swift backend storage.
#
# Provide a string value representing the URL endpoint to use for
# storing Glance images in Swift store. By default, an endpoint
# is not set and the storage URL returned by ``auth`` is used.
# Setting an endpoint with ``swift_store_endpoint`` overrides the
# storage URL and is used for Glance image storage.
#
# NOTE: The URL should include the path up to, but excluding the
# container. The location of an object is obtained by appending
# the container and object to the configured URL.
#
# Possible values:
# * String value representing a valid URL path up to a Swift container
#
# Related Options:
# * None
#
# (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#swift_store_endpoint = https://swift.openstack.example.org/v1/path_not_including_container_name
#
# Endpoint Type of Swift service.
#
# This string value indicates the endpoint type to use to fetch the
# Swift endpoint. The endpoint type determines the actions the user will
# be allowed to perform, for instance, reading and writing to the Store.
# This setting is only used if swift_store_auth_version is greater than
# 1.
#
# Possible values:
# * publicURL
# * adminURL
# * internalURL
#
# Related options:
# * swift_store_endpoint
#
# (string value)
# Possible values:
# publicURL - <No description provided>
# adminURL - <No description provided>
# internalURL - <No description provided>
#swift_store_endpoint_type = publicURL
#
# Type of Swift service to use.
#
# Provide a string value representing the service type to use for
# storing images while using Swift backend storage. The default
# service type is set to ``object-store``.
#
# NOTE: If ``swift_store_auth_version`` is set to 2, the value for
# this configuration option needs to be ``object-store``. If using
# a higher version of Keystone or a different auth scheme, this
# option may be modified.
#
# Possible values:
# * A string representing a valid service type for Swift storage.
#
# Related Options:
# * None
#
# (string value)
#swift_store_service_type = object-store
#
# Name of single container to store images/name prefix for multiple containers
#
# When a single container is being used to store images, this configuration
# option indicates the container within the Glance account to be used for
# storing all images. When multiple containers are used to store images, this
# will be the name prefix for all containers. Usage of single/multiple
# containers can be controlled using the configuration option
# ``swift_store_multiple_containers_seed``.
#
# When using multiple containers, the containers will be named after the value
# set for this configuration option with the first N chars of the image UUID
# as the suffix delimited by an underscore (where N is specified by
# ``swift_store_multiple_containers_seed``).
#
# Example: if the seed is set to 3 and swift_store_container = ``glance``, then
# an image with UUID ``fdae39a1-bac5-4238-aba4-69bcc726e848`` would be placed in
# the container ``glance_fda``. All dashes in the UUID are included when
# creating the container name but do not count toward the character limit, so
# when N=10 the container name would be ``glance_fdae39a1-ba.``
#
# Possible values:
# * If using single container, this configuration option can be any string
# that is a valid swift container name in Glance's Swift account
# * If using multiple containers, this configuration option can be any
# string as long as it satisfies the container naming rules enforced by
# Swift. The value of ``swift_store_multiple_containers_seed`` should be
# taken into account as well.
#
# Related options:
# * ``swift_store_multiple_containers_seed``
# * ``swift_store_multi_tenant``
# * ``swift_store_create_container_on_put``
#
# (string value)
#swift_store_container = glance
#
# The size threshold, in MB, after which Glance will start segmenting image
# data.
#
# Swift has an upper limit on the size of a single uploaded object. By default,
# this is 5GB. To upload objects bigger than this limit, objects are segmented
# into multiple smaller objects that are tied together with a manifest file.
# For more detail, refer to
# https://docs.openstack.org/swift/latest/overview_large_objects.html
#
# This configuration option specifies the size threshold over which the Swift
# driver will start segmenting image data into multiple smaller files.
# Currently, the Swift driver only supports creating Dynamic Large Objects.
#
# NOTE: This should be set by taking into account the large object limit
# enforced by the Swift cluster in consideration.
#
# Possible values:
# * A positive integer that is less than or equal to the large object limit
# enforced by the Swift cluster in consideration.
#
# Related options:
# * ``swift_store_large_object_chunk_size``
#
# (integer value)
# Minimum value: 1
#swift_store_large_object_size = 5120
#
# The maximum size, in MB, of the segments when image data is segmented.
#
# When image data is segmented to upload images that are larger than the limit
# enforced by the Swift cluster, image data is broken into segments that are no
# bigger than the size specified by this configuration option.
# Refer to ``swift_store_large_object_size`` for more detail.
#
# For example: if ``swift_store_large_object_size`` is 5GB and
# ``swift_store_large_object_chunk_size`` is 1GB, an image of size 6.2GB will be
# segmented into 7 segments where the first six segments will be 1GB in size and
# the seventh segment will be 0.2GB.
#
# Possible values:
# * A positive integer that is less than or equal to the large object limit
# enforced by Swift cluster in consideration.
#
# Related options:
# * ``swift_store_large_object_size``
#
# (integer value)
# Minimum value: 1
#swift_store_large_object_chunk_size = 200
#
# Create container, if it doesn't already exist, when uploading image.
#
# At the time of uploading an image, if the corresponding container doesn't
# exist, it will be created provided this configuration option is set to True.
# By default, it won't be created. This behavior is applicable for both single
# and multiple containers mode.
#
# Possible values:
# * True
# * False
#
# Related options:
# * None
#
# (boolean value)
#swift_store_create_container_on_put = false
#
# Store images in tenant's Swift account.
#
# This enables multi-tenant storage mode which causes Glance images to be stored
# in tenant specific Swift accounts. If this is disabled, Glance stores all
# images in its own account. More details multi-tenant store can be found at
# https://wiki.openstack.org/wiki/GlanceSwiftTenantSpecificStorage
#
# NOTE: If using multi-tenant swift store, please make sure
# that you do not set a swift configuration file with the
# 'swift_store_config_file' option.
#
# Possible values:
# * True
# * False
#
# Related options:
# * swift_store_config_file
#
# (boolean value)
#swift_store_multi_tenant = false
#
# Seed indicating the number of containers to use for storing images.
#
# When using a single-tenant store, images can be stored in one or more than one
# containers. When set to 0, all images will be stored in one single container.
# When set to an integer value between 1 and 32, multiple containers will be
# used to store images. This configuration option will determine how many
# containers are created. The total number of containers that will be used is
# equal to 16^N, so if this config option is set to 2, then 16^2=256 containers
# will be used to store images.
#
# Please refer to ``swift_store_container`` for more detail on the naming
# convention. More detail about using multiple containers can be found at
# https://specs.openstack.org/openstack/glance-specs/specs/kilo/swift-store-
# multiple-containers.html
#
# NOTE: This is used only when swift_store_multi_tenant is disabled.
#
# Possible values:
# * A non-negative integer less than or equal to 32
#
# Related options:
# * ``swift_store_container``
# * ``swift_store_multi_tenant``
# * ``swift_store_create_container_on_put``
#
# (integer value)
# Minimum value: 0
# Maximum value: 32
#swift_store_multiple_containers_seed = 0
#
# List of tenants that will be granted admin access.
#
# This is a list of tenants that will be granted read/write access on
# all Swift containers created by Glance in multi-tenant mode. The
# default value is an empty list.
#
# Possible values:
# * A comma separated list of strings representing UUIDs of Keystone
# projects/tenants
#
# Related options:
# * None
#
# (list value)
#swift_store_admin_tenants =
#
# SSL layer compression for HTTPS Swift requests.
#
# Provide a boolean value to determine whether or not to compress
# HTTPS Swift requests for images at the SSL layer. By default,
# compression is enabled.
#
# When using Swift as the backend store for Glance image storage,
# SSL layer compression of HTTPS Swift requests can be set using
# this option. If set to False, SSL layer compression of HTTPS
# Swift requests is disabled. Disabling this option may improve
# performance for images which are already in a compressed format,
# for example, qcow2.
#
# Possible values:
# * True
# * False
#
# Related Options:
# * None
#
# (boolean value)
#swift_store_ssl_compression = true
#
# The number of times a Swift download will be retried before the
# request fails.
#
# Provide an integer value representing the number of times an image
# download must be retried before erroring out. The default value is
# zero (no retry on a failed image download). When set to a positive
# integer value, ``swift_store_retry_get_count`` ensures that the
# download is attempted this many more times upon a download failure
# before sending an error message.
#
# Possible values:
# * Zero
# * Positive integer value
#
# Related Options:
# * None
#
# (integer value)
# Minimum value: 0
#swift_store_retry_get_count = 0
#
# Time in seconds defining the size of the window in which a new
# token may be requested before the current token is due to expire.
#
# Typically, the Swift storage driver fetches a new token upon the
# expiration of the current token to ensure continued access to
# Swift. However, some Swift transactions (like uploading image
# segments) may not recover well if the token expires on the fly.
#
# Hence, by fetching a new token before the current token expiration,
# we make sure that the token does not expire or is close to expiry
# before a transaction is attempted. By default, the Swift storage
# driver requests for a new token 60 seconds or less before the
# current token expiration.
#
# Possible values:
# * Zero
# * Positive integer value
#
# Related Options:
# * None
#
# (integer value)
# Minimum value: 0
#swift_store_expire_soon_interval = 60
#
# Use trusts for multi-tenant Swift store.
#
# This option instructs the Swift store to create a trust for each
# add/get request when the multi-tenant store is in use. Using trusts
# allows the Swift store to avoid problems that can be caused by an
# authentication token expiring during the upload or download of data.
#
# By default, ``swift_store_use_trusts`` is set to ``True``(use of
# trusts is enabled). If set to ``False``, a user token is used for
# the Swift connection instead, eliminating the overhead of trust
# creation.
#
# NOTE: This option is considered only when
# ``swift_store_multi_tenant`` is set to ``True``
#
# Possible values:
# * True
# * False
#
# Related options:
# * swift_store_multi_tenant
#
# (boolean value)
#swift_store_use_trusts = true
#
# Buffer image segments before upload to Swift.
#
# Provide a boolean value to indicate whether or not Glance should
# buffer image data to disk while uploading to swift. This enables
# Glance to resume uploads on error.
#
# NOTES:
# When enabling this option, one should take great care as this
# increases disk usage on the API node. Be aware that depending
# upon how the file system is configured, the disk space used
# for buffering may decrease the actual disk space available for
# the glance image cache. Disk utilization will cap according to
# the following equation:
# (``swift_store_large_object_chunk_size`` * ``workers`` * 1000)
#
# Possible values:
# * True
# * False
#
# Related options:
# * swift_upload_buffer_dir
#
# (boolean value)
#swift_buffer_on_upload = false
#
# Reference to default Swift account/backing store parameters.
#
# Provide a string value representing a reference to the default set
# of parameters required for using swift account/backing store for
# image storage. The default reference value for this configuration
# option is 'ref1'. This configuration option dereferences the
# parameters and facilitates image storage in Swift storage backend
# every time a new image is added.
#
# Possible values:
# * A valid string value
#
# Related options:
# * None
#
# (string value)
#default_swift_reference = ref1
# DEPRECATED: Version of the authentication service to use. Valid versions are 2
# and 3 for keystone and 1 (deprecated) for swauth and rackspace. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason:
# The option 'auth_version' in the Swift back-end configuration file is
# used instead.
#swift_store_auth_version = 2
# DEPRECATED: The address where the Swift authentication service is listening.
# (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason:
# The option 'auth_address' in the Swift back-end configuration file is
# used instead.
#swift_store_auth_address = <None>
# DEPRECATED: The user to authenticate against the Swift authentication service.
# (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason:
# The option 'user' in the Swift back-end configuration file is set instead.
#swift_store_user = <None>
# DEPRECATED: Auth key for the user authenticating against the Swift
# authentication service. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason:
# The option 'key' in the Swift back-end configuration file is used
# to set the authentication key instead.
#swift_store_key = <None>
#
# Absolute path to the file containing the swift account(s)
# configurations.
#
# Include a string value representing the path to a configuration
# file that has references for each of the configured Swift
# account(s)/backing stores. By default, no file path is specified
# and customized Swift referencing is disabled. Configuring this
# option is highly recommended while using Swift storage backend for
# image storage as it avoids storage of credentials in the database.
#
# NOTE: Please do not configure this option if you have set
# ``swift_store_multi_tenant`` to ``True``.
#
# Possible values:
# * String value representing an absolute path on the glance-api
# node
#
# Related options:
# * swift_store_multi_tenant
#
# (string value)
#swift_store_config_file = <None>
#
# Directory to buffer image segments before upload to Swift.
#
# Provide a string value representing the absolute path to the
# directory on the glance node where image segments will be
# buffered briefly before they are uploaded to swift.
#
# NOTES:
# * This is required only when the configuration option
# ``swift_buffer_on_upload`` is set to True.
# * This directory should be provisioned keeping in mind the
# ``swift_store_large_object_chunk_size`` and the maximum
# number of images that could be uploaded simultaneously by
# a given glance node.
#
# Possible values:
# * String value representing an absolute directory path
#
# Related options:
# * swift_buffer_on_upload
# * swift_store_large_object_chunk_size
#
# (string value)
#swift_upload_buffer_dir = <None>
#
# Address of the ESX/ESXi or vCenter Server target system.
#
# This configuration option sets the address of the ESX/ESXi or vCenter
# Server target system. This option is required when using the VMware
# storage backend. The address can contain an IP address (127.0.0.1) or
# a DNS name (www.my-domain.com).
#
# Possible Values:
# * A valid IPv4 or IPv6 address
# * A valid DNS name
#
# Related options:
# * vmware_server_username
# * vmware_server_password
#
# (host address value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#vmware_server_host = 127.0.0.1
#
# Server username.
#
# This configuration option takes the username for authenticating with
# the VMware ESX/ESXi or vCenter Server. This option is required when
# using the VMware storage backend.
#
# Possible Values:
# * Any string that is the username for a user with appropriate
# privileges
#
# Related options:
# * vmware_server_host
# * vmware_server_password
#
# (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#vmware_server_username = root
#
# Server password.
#
# This configuration option takes the password for authenticating with
# the VMware ESX/ESXi or vCenter Server. This option is required when
# using the VMware storage backend.
#
# Possible Values:
# * Any string that is a password corresponding to the username
# specified using the "vmware_server_username" option
#
# Related options:
# * vmware_server_host
# * vmware_server_username
#
# (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#vmware_server_password = vmware
#
# The number of VMware API retries.
#
# This configuration option specifies the number of times the VMware
# ESX/VC server API must be retried upon connection related issues or
# server API call overload. It is not possible to specify 'retry
# forever'.
#
# Possible Values:
# * Any positive integer value
#
# Related options:
# * None
#
# (integer value)
# Minimum value: 1
#vmware_api_retry_count = 10
#
# Interval in seconds used for polling remote tasks invoked on VMware
# ESX/VC server.
#
# This configuration option takes in the sleep time in seconds for polling an
# on-going async task as part of the VMWare ESX/VC server API call.
#
# Possible Values:
# * Any positive integer value
#
# Related options:
# * None
#
# (integer value)
# Minimum value: 1
#vmware_task_poll_interval = 5
#
# The directory where the glance images will be stored in the datastore.
#
# This configuration option specifies the path to the directory where the
# glance images will be stored in the VMware datastore. If this option
# is not set, the default directory where the glance images are stored
# is openstack_glance.
#
# Possible Values:
# * Any string that is a valid path to a directory
#
# Related options:
# * None
#
# (string value)
#vmware_store_image_dir = /openstack_glance
#
# Set verification of the ESX/vCenter server certificate.
#
# This configuration option takes a boolean value to determine
# whether or not to verify the ESX/vCenter server certificate. If this
# option is set to True, the ESX/vCenter server certificate is not
# verified. If this option is set to False, then the default CA
# truststore is used for verification.
#
# This option is ignored if the "vmware_ca_file" option is set. In that
# case, the ESX/vCenter server certificate will then be verified using
# the file specified using the "vmware_ca_file" option .
#
# Possible Values:
# * True
# * False
#
# Related options:
# * vmware_ca_file
#
# (boolean value)
# Deprecated group/name - [glance_store]/vmware_api_insecure
#vmware_insecure = false
#
# Absolute path to the CA bundle file.
#
# This configuration option enables the operator to use a custom
# Cerificate Authority File to verify the ESX/vCenter certificate.
#
# If this option is set, the "vmware_insecure" option will be ignored
# and the CA file specified will be used to authenticate the ESX/vCenter
# server certificate and establish a secure connection to the server.
#
# Possible Values:
# * Any string that is a valid absolute path to a CA file
#
# Related options:
# * vmware_insecure
#
# (string value)
#
# This option has a sample default set, which means that
# its actual default value may vary from the one documented
# below.
#vmware_ca_file = /etc/ssl/certs/ca-certificates.crt
#
# The datastores where the image can be stored.
#
# This configuration option specifies the datastores where the image can
# be stored in the VMWare store backend. This option may be specified
# multiple times for specifying multiple datastores. The datastore name
# should be specified after its datacenter path, separated by ":". An
# optional weight may be given after the datastore name, separated again
# by ":" to specify the priority. Thus, the required format becomes
# <datacenter_path>:<datastore_name>:<optional_weight>.
#
# When adding an image, the datastore with highest weight will be
# selected, unless there is not enough free space available in cases
# where the image size is already known. If no weight is given, it is
# assumed to be zero and the directory will be considered for selection
# last. If multiple datastores have the same weight, then the one with
# the most free space available is selected.
#
# Possible Values:
# * Any string of the format:
# <datacenter_path>:<datastore_name>:<optional_weight>
#
# Related options:
# * None
#
# (multi valued)
#vmware_datastores =
[oslo_concurrency]
#
# From oslo.concurrency
#
# Enables or disables inter-process locks. (boolean value)
#disable_process_locking = false
# Directory to use for lock files. For security, the specified directory should
# only be writable by the user running the processes that need locking. Defaults
# to environment variable OSLO_LOCK_PATH. If external locks are used, a lock
# path must be set. (string value)
#lock_path = <None>
[oslo_policy]
#
# From oslo.policy
#
# This option controls whether or not to enforce scope when evaluating policies.
# If ``True``, the scope of the token used in the request is compared to the
# ``scope_types`` of the policy being enforced. If the scopes do not match, an
# ``InvalidScope`` exception will be raised. If ``False``, a message will be
# logged informing operators that policies are being invoked with mismatching
# scope. (boolean value)
#enforce_scope = false
# This option controls whether or not to use old deprecated defaults when
# evaluating policies. If ``True``, the old deprecated defaults are not going to
# be evaluated. This means if any existing token is allowed for old defaults but
# is disallowed for new defaults, it will be disallowed. It is encouraged to
# enable this flag along with the ``enforce_scope`` flag so that you can get the
# benefits of new defaults and ``scope_type`` together (boolean value)
#enforce_new_defaults = false
# The relative or absolute path of a file that maps roles to permissions for a
# given service. Relative paths must be specified in relation to the
# configuration file setting this option. (string value)
#policy_file = policy.yaml
# Default rule. Enforced when a requested rule is not found. (string value)
#policy_default_rule = default
# Directories where policy configuration files are stored. They can be relative
# to any directory in the search path defined by the config_dir option, or
# absolute paths. The file defined by policy_file must exist for these
# directories to be searched. Missing or empty directories are ignored. (multi
# valued)
#policy_dirs = policy.d
# Content Type to send and receive data for REST based policy check (string
# value)
# Possible values:
# application/x-www-form-urlencoded - <No description provided>
# application/json - <No description provided>
#remote_content_type = application/x-www-form-urlencoded
# server identity verification for REST based policy check (boolean value)
#remote_ssl_verify_server_crt = false
# Absolute path to ca cert file for REST based policy check (string value)
#remote_ssl_ca_crt_file = <None>
# Absolute path to client cert for REST based policy check (string value)
#remote_ssl_client_crt_file = <None>
# Absolute path client key file REST based policy check (string value)
#remote_ssl_client_key_file = <None>