12 KiB

Raw Blame History

Configuration

Before you launch Galera Cluster, you need to configure the server and the database to operate as part of the cluster.

Configuring the server

Certain services running on the underlying operating system of your OpenStack database may block Galera Cluster from normal operation or prevent mysqld from achieving network connectivity with the cluster.

Firewall

Galera Cluster requires that you open four ports to network traffic:

On 3306, Galera Cluster uses TCP for database client connections and State Snapshot Transfers methods that require the client, (that is, mysqldump).
On 4567 Galera Cluster uses TCP for replication traffic. Multicast replication uses both TCP and UDP on this port.
On 4568 Galera Cluster uses TCP for Incremental State Transfers.
On 4444 Galera Cluster uses TCP for all other State Snapshot Transfer methods.

For more information on firewalls, see Firewalls and default ports, in the Configuration Reference.

`iptables`

For many Linux distributions, you can configure the firewall using the iptables utility. To do so, complete the following steps:

For each cluster node, run the following commands, replacing NODE-IP-ADDRESS with the IP address of the cluster node you want to open the firewall to:

# iptables --append INPUT --in-interface eth0 \
   --protocol --match tcp --dport 3306 \
   --source NODE-IP-ADDRESS --jump ACCEPT
# iptables --append INPUT --in-interface eth0 \
   --protocol --match tcp --dport 4567 \
   --source NODE-IP-ADDRESS --jump ACCEPT
# iptables --append INPUT --in-interface eth0 \
   --protocol --match tcp --dport 4568 \
   --source NODE-IP-ADDRESS --jump ACCEPT
# iptables --append INPUT --in-interface eth0 \
   --protocol --match tcp --dport 4444 \
   --source NODE-IP-ADDRESS --jump ACCEPT

In the event that you also want to configure multicast replication, run this command as well:

# iptables --append INPUT --in-interface eth0 \
    --protocol udp --match udp --dport 4567 \
  --source NODE-IP-ADDRESS --jump ACCEPT

Make the changes persistent. For servers that use init, use the save command:
```
# service save iptables
```
For servers that use systemd, you need to save the current packet filtering to the path of the file that iptables reads when it starts. This path can vary by distribution, but common locations are in the /etc directory, such as:
- /etc/sysconfig/iptables
- /etc/iptables/iptables.rules
When you find the correct path, run the iptables-save command:
```
# iptables-save > /etc/sysconfig/iptables
```

With the firewall configuration saved, whenever your OpenStack database starts.

`firewall-cmd`

For many Linux distributions, you can configure the firewall using the firewall-cmd utility for FirewallD. To do so, complete the following steps on each cluster node:

Add the Galera Cluster service:
```
# firewall-cmd --add-service=mysql
```
For each instance of OpenStack database in your cluster, run the following commands, replacing NODE-IP-ADDRESS with the IP address of the cluster node you want to open the firewall to:
```
# firewall-cmd --add-port=3306/tcp
# firewall-cmd --add-port=4567/tcp
# firewall-cmd --add-port=4568/tcp
# firewall-cmd --add-port=4444/tcp
```
In the event that you also want to configure mutlicast replication, run this command as well:
```
# firewall-cmd --add-port=4567/udp
```

To make this configuration persistent, repeat the above commands with the --permanent option.

# firewall-cmd --add-service=mysql --permanent
# firewall-cmd --add-port=3306/tcp --permanent
# firewall-cmd --add-port=4567/tcp --permanent
# firewall-cmd --add-port=4568/tcp --permanent
# firewall-cmd --add-port=4444/tcp --permanent
# firewall-cmd --add-port=4567/udp --permanent

With the firewall configuration saved, whenever your OpenStack database starts.

SELinux

Security-Enhanced Linux is a kernel module for improving security on Linux operating systems. It is commonly enabled and configured by default on Red Hat-based distributions. In the context of Galera Cluster, systems with SELinux may block the database service, keep it from starting or prevent it from establishing network connections with the cluster.

To configure SELinux to permit Galera Cluster to operate, complete the following steps on each cluster node:

Using the semanage utility, open the relevant ports:

# semanage port -a -t mysqld_port_t -p tcp 3306
# semanage port -a -t mysqld_port_t -p tcp 4567
# semanage port -a -t mysqld_port_t -p tcp 4568
# semanage port -a -t mysqld_port_t -p tcp 4444

In the event that you use multicast replication, you also need to open 4567 to UDP traffic:

# semanage port -a -t mysqld_port_t -p udp 4567

Set SELinux to allow the database server to run:
```
# semanage permissive -a mysqld_t
```

With these options set, SELinux now permits Galera Cluster to operate.

Note

Bear in mind, leaving SELinux in permissive mode is not a good security practice. Over the longer term, you need to develop a security policy for Galera Cluster and then switch SELinux back into enforcing mode.

For more information on configuring SELinux to work with Galera Cluster, see the Documentation

AppArmor

Application Armor is a kernel module for improving security on Linux operating systems. It is developed by Canonical and commonly used on Ubuntu-based distributions. In the context of Galera Cluster, systems with AppArmor may block the database service from operating normally.

To configure AppArmor to work with Galera Cluster, complete the following steps on each cluster node:

Create a symbolic link for the database server in the disable directory:
```
# ln -s /etc/apparmor.d/usr /etc/apparmor.d/disable/.sbin.mysqld
```
Restart AppArmor. For servers that use init, run the following command:
```
# service apparmor restart
```
For servers that use systemd, instead run this command:
```
# systemctl restart apparmor
```

AppArmor now permits Galera Cluster to operate.

Database configuration

MySQL databases, including MariaDB and Percona XtraDB, manage their configurations using a my.cnf file, which is typically located in the /etc directory. Configuration options available in these databases are also available in Galera Cluster, with some restrictions and several additions.

[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
user=mysql
binlog_format=ROW
bind-address=0.0.0.0

# InnoDB Configuration
default_storage_engine=innodb
innodb_autoinc_lock_mode=2
innodb_flush_log_at_trx_commit=0
innodb_buffer_pool_size=122M

# Galera Cluster Configuration
wsrep_provider=/usr/lib/libgalera_smm.so
wsrep_provider_options="pc.recovery=TRUE;gcache.size=300M"
wsrep_cluster_name="my_example_cluster"
wsrep_cluster_address="gcomm://GALERA1-IP,GALERA2-IP,GALERA3-IP"
wsrep_sst_method=rsync

Configuring `mysqld`

While all of the configuration parameters available to the standard MySQL, MariaDB or Percona XtraDB database server are available in Galera Cluster, there are some that you must define an outset to avoid conflict or unexpected behavior.

Ensure that the database server is not bound only to to the localhost, 127.0.0.1. Instead, bind it to 0.0.0.0 to ensure it listens on all available interfaces.
```
bind-address=0.0.0.0
```
Ensure that the binary log format is set to use row-level replication, as opposed to statement-level replication:
```
binlog_format=ROW
```

Configuring InnoDB

Galera Cluster does not support non-transactional storage engines and requires that you use InnoDB by default. There are some additional parameters that you must define to avoid conflicts.

Ensure that the default storage engine is set to InnoDB:
```
default_storage_engine=InnoDB
```
Ensure that the InnoDB locking mode for generating auto-increment values is set to 2, which is the interleaved locking mode.
```
innodb_autoinc_lock_mode=2
```
Do not change this value. Other modes may cause INSERT statements on tables with auto-increment columns to fail as well as unresolved deadlocks that leave the system unresponsive.
Ensure that the InnoDB log buffer is written to file once per second, rather than on each commit, to improve performance:
```
innodb_flush_log_at_trx_commit=0
```
Bear in mind, while setting this parameter to 1 or 2 can improve performance, it introduces certain dangers. Operating system failures can erase the last second of transactions. While you can recover this data from another node, if the cluster goes down at the same time (in the event of a data center power outage), you lose this data permanently.
Define the InnoDB memory buffer pool size. The default value is 128 MB, but to compensate for Galera Cluster's additional memory usage, scale your usual value back by 5%:
```
innodb_buffer_pool_size=122M
```

Configuring wsrep replication

Galera Cluster configuration parameters all have the wsrep_ prefix. There are five that you must define for each cluster node in your OpenStack database.

wsrep Provider The Galera Replication Plugin serves as the wsrep Provider for Galera Cluster. It is installed on your system as the libgalera_smm.so file. You must define the path to this file in your my.cnf.
```
wsrep_provider="/usr/lib/libgalera_smm.so"
```
Cluster Name Define an arbitrary name for your cluster.
```
wsrep_cluster_name="my_example_cluster"
```
You must use the same name on every cluster node. The connection fails when this value does not match.
Cluster Address List the IP addresses for each cluster node.
```
wsrep_cluster_address="gcomm://192.168.1.1,192.168.1.2,192.168.1.3"
```
Replace the IP addresses given here with comma-separated list of each OpenStack database in your cluster.
Node Name Define the logical name of the cluster node.
```
wsrep_node_name="Galera1"
```
Node Address Define the IP address of the cluster node.
```
wsrep_node_address="192.168.1.1"
```

Additional parameters

For a complete list of the available parameters, run the SHOW VARIABLES command from within the database client:

SHOW VARIABLES LIKE 'wsrep_%';

+------------------------------+-------+
| Variable_name                | Value |
+------------------------------+-------+
| wsrep_auto_increment_control | ON    |
+------------------------------+-------+
| wsrep_causal_reads           | OFF   |
+------------------------------+-------+
| wsrep_certify_nonPK          | ON    |
+------------------------------+-------+
| ...                          | ...   |
+------------------------------+-------+
| wsrep_sync_wait              | 0     |
+------------------------------+-------+

For the documentation of these parameters, wsrep Provider option and status variables available in Galera Cluster, see Reference.

12 KiB Raw Blame History