replace git protocol by https

It will better to clone with https as "HTTPS works practically everywhere"
and 9418 port is blocked by many corporate firewalls.

Change-Id: I27edb8919af8ca3617bb50a305edfe7bbbe96836
This commit is contained in:
ricolin 2015-10-21 15:17:24 +08:00
parent ef95a2bdac
commit 11c69696ac
5 changed files with 9 additions and 9 deletions

View File

@ -13,7 +13,7 @@ Getting Started
If you'd like to run from the master branch, you can clone the git repo:
git clone git://git.openstack.org/openstack/heat.git
git clone https://git.openstack.org/openstack/heat
* Wiki: http://wiki.openstack.org/Heat

View File

@ -33,8 +33,8 @@ used to create heat-enabled images.
Install the tool (preferably in a virtualenv) and fetch the elements::
pip install git+git://git.openstack.org/openstack/diskimage-builder.git
git clone git://git.openstack.org/openstack/tripleo-image-elements.git
pip install git+https://git.openstack.org/openstack/diskimage-builder
git clone https://git.openstack.org/openstack/tripleo-image-elements
To create a heat-cfntools enabled image with the current release of Fedora x86_64::
@ -63,9 +63,9 @@ package download failure causing the stack launch to fail.
To create an image that contains hooks needed for SoftwareConfig and SoftwareDeployment,
you can follow the steps bellow to build a fedora based image::
pip install git+git://git.openstack.org/openstack/diskimage-builder.git
git clone git://git.openstack.org/openstack/tripleo-image-elements.git
git clone git://git.openstack.org/openstack/heat-templates.git
pip install git+https://git.openstack.org/openstack/diskimage-builder
git clone https://git.openstack.org/openstack/tripleo-image-elements
git clone https://git.openstack.org/openstack/heat-templates
export ELEMENTS_PATH=tripleo-image-elements/elements:heat-templates/hot/software-config/elements
disk-image-create vm \
fedora selinux-permissive \

View File

@ -46,7 +46,7 @@ To use Ceilometer Alarms you need to enable Ceilometer in devstack.
Adding the following lines to your `localrc` file will enable the ceilometer services::
CEILOMETER_BACKEND=mongodb
enable_plugin ceilometer git://git.openstack.org/openstack/ceilometer
enable_plugin ceilometer https://git.openstack.org/openstack/ceilometer
Configure DevStack to enable OSprofiler
---------------------------------------

View File

@ -259,7 +259,7 @@ For each machine, B and C, you must do the following steps:
1. Clone the heat repository https://git.openstack.org/cgit/openstack/heat, run:
::
git clone git://git.openstack.org/openstack/heat.git
git clone https://git.openstack.org/openstack/heat
2. Create a local copy of the configuration file */etc/heat/heat.conf* from
the machine A;

View File

@ -4,7 +4,7 @@ oslo-incubator
A number of modules from oslo-incubator are imported into this project.
You can clone the oslo-incubator repository using the following url:
git://git.openstack.org/openstack/oslo-incubator
https://git.openstack.org/openstack/oslo-incubator
These modules are "incubating" in oslo-incubator and are kept in sync
with the help of oslo-incubator's update.py script. See: