Now the tox.ini is hardcode that could only run all test cases
in horizon/ and openstack_dashboard/. Following usage does not work:
"tox -e py27 openstack_dashboard.test.tests.policy:PolicyTestCase"
This patch enable pass args to run subset test cases.
Remove envs py27{-horizon,-openstack_dashboard}, you could run
"tox -e py27 horizon/openstack_dashboard".
Partially-Implements: blueprint enhance-tox
Change-Id: I21224d49a7a6e07d0184871b21268199def76db6
Recently OpenStack introduced a mechanism to specify a constrained
"working set" of packages that are "guaranteed" to produce a working
OpenStack environment. This pinning of packages limits the more
broadly-defined requirements.txt which is managed by
global-requirements.
This patch modifies our tox test environment to use upper-constraints
and explictly removes those requirements from the "venv" tox
environment that is used by some commands in infra.
Change-Id: I84582370e139fc5812bc85ae5341f7f9c8b93ff5
Closes-Bug: 1554791
Running the pep8 environment currently warns that 'rm' is not
installed in testenv. This patch removes the warning by whitelisting
the rm command.
Change-Id: I822195990d345ddd08237f9696651c71ad59b9d2
Closes-Bug: #1583025
The translation import fails since we do not store pot files in tree
anymore. Replace the "git checkout" after testing message extracting
with a simple rm. Note that we cannot use a wildcard in tox.ini for the
rm, instead give full names.
This is a followup to Ief0861e01ff758120001f4c8dfdbf9afadf09f5b.
Change-Id: I0fc59a444cfca9ffdf7e7eaa73ba321295c2aa2e
Several changes:
- Dont rely on run_tests.sh and run the commands directly
- Move the coverage options to the setup.cfg
- Set py27 envs under the same umbrella
- Split horizon and openstack_dashboard tests into 2
different envs
- Remove usedevelop from most envs as its not needed
- Set basepython to 27 on the default env
- Allow adding posargs to py34 env
- Add npm environment which defaults to npm run test
- Add runserver as a new env
- Move pep8 to be the first tests so we fail fast
- Provide an env to tests against system packages, useful
for package builders that DONT want to test against pip
install but their local packages installation.
- Allow to pass TOX_EXTRA_DEPS to the system_packages
tests in case some extra pip packages are needed
- Add a manage env to pass commands to manage.py
- Add an environment to createmessages
- Add an environment to check only if we can create
messages
- pep8 environment also runs the check for messages
- All python commands use {envpython} so no escape
from the venv is possible
- Uses {toxinidir} for a clear indication of where
the files to be executed are
- Moves all keywords for pybabel to the setup.cfg
- Removes not needed whitelist_external for all envs
and uses only git for one specific env
Change-Id: Ia1be8f60265d9dab2639a05912b4b7c51f1d4033
Implements: blueprint enhance-tox
With this change, all Horizon unit tests pass on Python 3.4.
Changes:
* vpn/tests.py, firewalls/tests.py: Replace reverse_lazy() with
reverse() to get a regular Python string. The lazy object caused
failures on Python 3.
* routers/tests.py: Decode HTTP body to get Unicode on Python 3. It
works also on Python 2.
* neutron.py: replace a/b with a//b to get an integer on Python 3.
* network_tests.py: remove useless copy.deepcopy() which caused a
recursion error on Python 3.
* metadata_defs/tests.py: expect a different JSON error message on
Python 3.
* tox.ini: remove openstack_dashboard whitelist, all unit tests now
pass on Python 3 ;-)
Partial-Implements: blueprint porting-python3
Change-Id: I7b4f036fc86b66c92cccafe6938a906045f03186
On Python 3, Content-Disposition header is encoded using MIME format
'=?utf-8?b?...?='. Use decode_header() of email.header to decode it.
Handle also Unicode/bytes issues on this header.
tox.ini: Add openstack_dashboard.dashboards.project.containers to
Python 3.4.
Partial-Implements: blueprint porting-python3
Change-Id: Id5898ee5494d019d1397ed3fa5e0a715e9a0393f
Stop using deprecated data_type_singular and data_type_plural:
replace them with action_present and action_past properties to handle
correctly singular/plural.
Partial-Implements: blueprint porting-python3
Change-Id: I4fc3acf2da27348f371d3e387588baafc286605a
* Convert reverse_lazy() to get a regular string, not a lazy()
object. lazy objects lack methods like .encode().
* don't compare None with int: test if delay is None before comparing
it to timeout.
* tox.ini: add openstack_dashboard.dashboards.project.loadbalancers
to Python 3.4
Partial-Implements: blueprint porting-python3
Change-Id: Icd2d6db1aae79a9584af1760e21f733d8f5f7f7d
This adds a failing Django 1.9 tox env. This will be followed by a
non-voting Jenkins job to show the tests failing, and then a follow up
patch to make them pass.
Change-Id: I0534746360266e4a99e014d69ac19ab2d5b44a83
Partially-Implements: blueprint drop-dj17
The best practice in Python is not to use mutable object (i.e. list,
dictionary, or instances of most classes) as value of default
argument (see https://goo.gl/Kwhg0T). A hacking rule to enforce this
practice is added as well.
The patch was inspired by CR https://review.openstack.org/#/c/198465/
and took most of its code from it as well. That's why original
copyrights are kept.
Closes-Bug: #1471349
Change-Id: Ia77b1736dbc3d4e28ff2d2c3424e9cfcaefa5077
* Use NamedTemporaryFile instead of TemporaryFile because we must
have a name which is a text on Python 3. Otherwise, the test fails.
On Python 3, TemporaryFile uses an integer for the file name, the
file descriptor.
* Replace filter() and map() with list comprehensions to get a list
on Python 3.
* On Python 3, temporary files are open in binary mode so write a
byte string instead of a text string.
* tox.ini: enable all image tests on Python 3.
Partial-Implements: blueprint porting-python3
Change-Id: Ice7f119c040bbddeda10ed45d137bb7851764b8d
Replace json.loads() with oslo_serialization.jsonutils.loads() to
accept bytes (HTTP body). jsonutils.loads() decodes the HTTP body
from UTF-8.
tox.ini: add network_topology tests to Python 3.
Change-Id: I9f65d63e3ed54525e52b92b7728b78cf1b9e7bb5
* On Python 3, the pretty JSON output doesn't add space before newline.
* CreateStackForm: don't compare str to int, it raises a TypeError on
Python 3. Instead, use MinLength already converted to int.
* tox.ini: enable all stacks on Python 3.
Partial-Implements: blueprint porting-python3
Change-Id: I20cd9e83720cc3974973bec5471864f0ffc00716
* Decode HTTP body from UTF-8 to get text on Python 3
* tox.ini: add routers tests to Python 3
Partial-Implements: blueprint porting-python3
Change-Id: Idc93818c4b62f782035604090b7c6fda459cf6fa
* Fix division: replace a/b with a//b to get integers
* test_clean_file_upload_form_invalid_data(): use a byte string, not
an unicode string for the test. The test ensures that decoding from
UTF-8 fails.
* quotas: replace filter() with a list-comprehesion to get a list on
Python 3.
* tox.ini: add the following tests to Python 3.4
- openstack_dashboard.dashboards.project.instances.tests
- openstack_dashboard.test.tests.quotas
* tox.ini: add also
--exclude-dir=openstack_dashboard/test/integration_tests to
openstack_dashboard tests on Python 3.4
Partial-Implements: blueprint porting-python3
Change-Id: I7caed713222b50ffec431155e6f91b543f7df466
Since tox 1.5, commands outside the virtual environment must be
explicitly listed in whitelist_externals. Without that, some commands
emit the warning:
WARNING:test command found but not installed in testenv
cmd: /bin/bash
env: ...
See also the whitelist_externals envconfig setting.
Change-Id: Iad1f623defbb32dafb5bad3613cec7a8409e2b2c
* DataTable: don't try to decode Unicode from UTF-8. Only decode on
Python 2.
* Use oslo_serialization.jsonutils.dump_as_bytes() to encode JSON
as bytes.
* Use oslo_serialization.jsonutils.loads() instead of json.loads() to
accept bytes string as input. On Python 3, json.loads() only
accepts Unicode string.
* Fix unit tests: HTTP body type is bytes.
* Container tests: use a named temporary file, the function handling
the filename fails. On Python 3, TemporaryFile() uses a number for
the filename: the file descriptor.
* Don't encode filename to UTF-8 on Python 3, keep Unicode.
* tox.ini: add 2 admin tests on Python 3.4.
Partial-Implements: blueprint porting-python3
Change-Id: Ib7e2cb17f20474590fac18faf8116131692ad694
Run the unicode operation of the sixer tool on openstack_dashboard/
directory.
tox.ini: Add the following tests to Python 3.4:
* openstack_dashboard.contrib.sahara.content.data_processing.data_sources.tests
* openstack_dashboard.contrib.sahara.content.data_processing.job_binaries.tests
* openstack_dashboard.contrib.sahara.content.data_processing.jobs.tests
* openstack_dashboard.dashboards.project.networks.tests
Partial-Implements: blueprint porting-python3
Change-Id: Ibfe52ccbccc30e6b1d59137c68942c9860805397
Co-Authored-By: Richard Jones <r1chardj0n3s@gmail.com>
Replace filter() with list-comprehension when a list is expected. On
Python 3, filter() returns an iterator, not a list.
tox.ini: add openstack admin volume tests to Python 3.4.
Partial-Implements: blueprint porting-python3
Change-Id: Id99124bf0ef5549c596d94f5d10ab5f88a4e200a
* XSS check: don't check the exact HTML output because the attributes
of the <a> tag are rendered on a different order depending on the
hash function. On Python 3, the hash function is now randomized.
* Replace table.columns.values() with list(table.columns.values())
to get a list on Python 3.
* WorkflowsTests: cast the HTTP response to bytes(), not to str().
On Python 2, bytes is str so the test pass on Python 2 and Python 3.
* tox.ini: run all Horizon tests on Python 3 (but keep the whitelist
for the openstack dashboard)
Partial-Implements: blueprint porting-python3
Change-Id: I19c5710fe53c6cdd3814a1615cef7b27339c444c
Add a json attribute to CreatedResponse and JSONResponse of
openstack_dashboard.api.rest.utils.
This patch changes unit tests: they now compare deserialized JSON
data instead of comparing the serialized JSON data which depends on
the exact hash function
This change makes the code more readable, but it was written to port
openstack_dashboard to Python 3. On Python 3, the hash function is
now randomized by default, so dictionary items are serialized in a
random order by JSON. Moreover, the hash function is different on
Python 2 and Python 3, so setting PYTHONHASHSEED=0 in tox.ini is not
enough to have a reliable JSON serialized ouput in all cases.
Fix also NaNJSONEncoder: On Python 3, don't try to decode bytes from
the encoder encoding, since the JSON encoder has no more encoding on
Python 3: it produces an Unicode string.
Partial-Implements: blueprint porting-python3
Change-Id: I8503ee530d4122b2ce733d02023454796934c8e6
Co-Authored-By: Richard Jones <r1chardj0n3s@gmail.com>
* get_cells(): cast dict.values() to a list to return a list
on Python 3. On Python 3, dict.values() now returns a view.
* Replace dict.values()[0] with list(dict.values())[0]
* get_tabs(): replace filter() with a list-comprehension to return a
list on Python 3
* tox.ini: add horizon.test.tests.tabs to Python 3.4
Partial-Implements: blueprint porting-python3
Change-Id: I0ebcaa5f7b283d04425ce7201087220376257d41
* Fix AngularGettextHTMLParser constructor: call the constructor of the
right parent class.
* tox.ini: Add horizon.test.tests.babel_extract_angular to Python 3.4
Partial-Implements: blueprint porting-python3
Change-Id: I020f9655baf18326f3752b82a8c3bf385c8e1e24
* Replace dict.values()[0] with list(dict.values())[0]. On Python 3,
dict.values() returns a view which is not indexable.
* tox.ini: add the following tests to Python 3.4
- openstack_dashboard.dashboards.identity.users
- openstack_dashboard.test.api_tests.glance_tests
- openstack_dashboard.test.api_tests.heat_tests
Partial-Implements: blueprint porting-python3
Change-Id: I68dbe85750399263938b1bf5a342fbb90de83861
* Fix CsvDataMixin: replace map() with a list-comprehension to get a
list on Python 3, because the sequence is consumed more than once. On
Python 3, map() returns an iterator which can only be consumed once.
* tox.ini: add openstack_dashboard.dashboards.project.overview.tests
to Python 3.4.
Partial-Implements: blueprint porting-python3
Change-Id: I9fb71a0b45c1e0a083c91476970938df5c649806
* Use literal octal number syntax instead of the oct() function. The
oct() function gives a different result on Python 2 and Python 3
(Python 3 uses the "0o" prefix, not Python 2).
* format_value() explicitly cast the result to float. It's needed on
Python 3 to cast a Decimal to float, because round(Decimal) returns a
Decimal.
* tox.ini: run all horizon.test.tests.utils tests on Python 3.4
Partial-Implements: blueprint porting-python3
Change-Id: Ifd7c0e16ea85b691b81659acb010e9eb6f982d13