# Copyright 2012 United States Government as represented by the # Administrator of the National Aeronautics and Space Administration. # All Rights Reserved. # # Copyright 2012 Cisco Systems, Inc. # Copyright 2012 NEC Corporation # # Licensed under the Apache License, Version 2.0 (the "License"); you may # not use this file except in compliance with the License. You may obtain # a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the # License for the specific language governing permissions and limitations # under the License. from __future__ import absolute_import import collections import copy import logging import netaddr from django.conf import settings from django.utils.translation import ugettext_lazy as _ from neutronclient.common import exceptions as neutron_exc from neutronclient.v2_0 import client as neutron_client from novaclient import exceptions as nova_exc import six from horizon import exceptions from horizon import messages from horizon.utils.memoized import memoized from horizon.utils.memoized import memoized_with_request from openstack_dashboard.api import base from openstack_dashboard.api import nova from openstack_dashboard.contrib.developer.profiler import api as profiler from openstack_dashboard import policy LOG = logging.getLogger(__name__) IP_VERSION_DICT = {4: 'IPv4', 6: 'IPv6'} OFF_STATE = 'OFF' ON_STATE = 'ON' ROUTER_INTERFACE_OWNERS = ( 'network:router_interface', 'network:router_interface_distributed', 'network:ha_router_replicated_interface' ) VNIC_TYPES = [ ('normal', _('Normal')), ('direct', _('Direct')), ('direct-physical', _('Direct Physical')), ('macvtap', _('MacVTap')), ('baremetal', _('Bare Metal')), ('virtio-forwarder', _('Virtio Forwarder')), ] class NeutronAPIDictWrapper(base.APIDictWrapper): def __init__(self, apidict): if 'admin_state_up' in apidict: if apidict['admin_state_up']: apidict['admin_state'] = 'UP' else: apidict['admin_state'] = 'DOWN' # Django cannot handle a key name with ':', so use '__'. apidict.update({ key.replace(':', '__'): value for key, value in apidict.items() if ':' in key }) super(NeutronAPIDictWrapper, self).__init__(apidict) def set_id_as_name_if_empty(self, length=8): try: if not self._apidict['name'].strip(): id = self._apidict['id'] if length: id = id[:length] self._apidict['name'] = '(%s)' % id except KeyError: pass def items(self): return self._apidict.items() @property def name_or_id(self): return (self._apidict.get('name').strip() or '(%s)' % self._apidict['id'][:13]) class Agent(NeutronAPIDictWrapper): """Wrapper for neutron agents.""" class Network(NeutronAPIDictWrapper): """Wrapper for neutron Networks.""" class Subnet(NeutronAPIDictWrapper): """Wrapper for neutron subnets.""" def __init__(self, apidict): apidict['ipver_str'] = get_ipver_str(apidict['ip_version']) super(Subnet, self).__init__(apidict) AUTO_ALLOCATE_ID = '__auto_allocate__' class PreAutoAllocateNetwork(Network): def __init__(self, request): tenant_id = request.user.tenant_id auto_allocated_subnet = Subnet({ 'name': 'auto_allocated_subnet', 'id': AUTO_ALLOCATE_ID, 'network_id': 'auto', 'tenant_id': tenant_id, # The following two fields are fake so that Subnet class # and the network topology view work without errors. 'ip_version': 4, 'cidr': '0.0.0.0/0', }) auto_allocated_network = { 'name': 'auto_allocated_network', 'description': 'Network to be allocated automatically', 'id': AUTO_ALLOCATE_ID, 'status': 'ACTIVE', 'admin_state_up': True, 'shared': False, 'router:external': False, 'subnets': [auto_allocated_subnet], 'tenant_id': tenant_id, } super(PreAutoAllocateNetwork, self).__init__(auto_allocated_network) class Trunk(NeutronAPIDictWrapper): """Wrapper for neutron trunks.""" @property def subport_count(self): return len(self._apidict.get('sub_ports', [])) def to_dict(self): trunk_dict = super(Trunk, self).to_dict() trunk_dict['name_or_id'] = self.name_or_id trunk_dict['subport_count'] = self.subport_count return trunk_dict class SubnetPool(NeutronAPIDictWrapper): """Wrapper for neutron subnetpools.""" class Port(NeutronAPIDictWrapper): """Wrapper for neutron ports.""" def __init__(self, apidict): if 'mac_learning_enabled' in apidict: apidict['mac_state'] = \ ON_STATE if apidict['mac_learning_enabled'] else OFF_STATE pairs = apidict.get('allowed_address_pairs') if pairs: apidict = copy.deepcopy(apidict) wrapped_pairs = [PortAllowedAddressPair(pair) for pair in pairs] apidict['allowed_address_pairs'] = wrapped_pairs super(Port, self).__init__(apidict) class PortTrunkParent(Port): """Neutron ports that are trunk parents. There's no need to add extra attributes for a trunk parent, because it already has 'trunk_details'. See also class PortTrunkSubport. """ class PortTrunkSubport(Port): """Neutron ports that are trunk subports. The Neutron API expresses port subtyping information in a surprisingly complex way. When you see a port with attribute 'trunk_details' you know it's a trunk parent. But when you see a port without the 'trunk_details' attribute you can't tell if it's a trunk subport or a regular one without looking beyond the port's attributes. You must go and check if trunks (and/or trunk_details of trunk parent ports) refer to this port. Since this behavior is awfully complex we hide this from the rest of horizon by introducing types PortTrunkParent and PortTrunkSubport. """ def __init__(self, apidict, trunk_subport_info): for field in ['trunk_id', 'segmentation_type', 'segmentation_id']: apidict[field] = trunk_subport_info[field] super(PortTrunkSubport, self).__init__(apidict) class PortAllowedAddressPair(NeutronAPIDictWrapper): """Wrapper for neutron port allowed address pairs.""" def __init__(self, addr_pair): super(PortAllowedAddressPair, self).__init__(addr_pair) # Horizon references id property for table operations self.id = addr_pair['ip_address'] class Router(NeutronAPIDictWrapper): """Wrapper for neutron routers.""" class RouterStaticRoute(NeutronAPIDictWrapper): """Wrapper for neutron routes extra route.""" def __init__(self, route): super(RouterStaticRoute, self).__init__(route) # Horizon references id property for table operations self.id = route['nexthop'] + ":" + route['destination'] class SecurityGroup(NeutronAPIDictWrapper): # Required attributes: id, name, description, tenant_id, rules def __init__(self, sg, sg_dict=None): if sg_dict is None: sg_dict = {sg['id']: sg['name']} sg['rules'] = [SecurityGroupRule(rule, sg_dict) for rule in sg['security_group_rules']] super(SecurityGroup, self).__init__(sg) def to_dict(self): return {k: self._apidict[k] for k in self._apidict if k != 'rules'} @six.python_2_unicode_compatible class SecurityGroupRule(NeutronAPIDictWrapper): # Required attributes: # id, parent_group_id # ip_protocol, from_port, to_port, ip_range, group # ethertype, direction (Neutron specific) def _get_secgroup_name(self, sg_id, sg_dict): if sg_id: if sg_dict is None: sg_dict = {} # If sg name not found in sg_dict, # first two parts of UUID is used as sg name. return sg_dict.get(sg_id, sg_id[:13]) else: return u'' def __init__(self, sgr, sg_dict=None): # In Neutron, if both remote_ip_prefix and remote_group_id are None, # it means all remote IP range is allowed, i.e., 0.0.0.0/0 or ::/0. if not sgr['remote_ip_prefix'] and not sgr['remote_group_id']: if sgr['ethertype'] == 'IPv6': sgr['remote_ip_prefix'] = '::/0' else: sgr['remote_ip_prefix'] = '0.0.0.0/0' rule = { 'id': sgr['id'], 'parent_group_id': sgr['security_group_id'], 'direction': sgr['direction'], 'ethertype': sgr['ethertype'], 'ip_protocol': sgr['protocol'], 'from_port': sgr['port_range_min'], 'to_port': sgr['port_range_max'], 'description': sgr.get('description', '') } cidr = sgr['remote_ip_prefix'] rule['ip_range'] = {'cidr': cidr} if cidr else {} group = self._get_secgroup_name(sgr['remote_group_id'], sg_dict) rule['group'] = {'name': group} if group else {} super(SecurityGroupRule, self).__init__(rule) def __str__(self): if 'name' in self.group: remote = self.group['name'] elif 'cidr' in self.ip_range: remote = self.ip_range['cidr'] else: remote = 'ANY' direction = 'to' if self.direction == 'egress' else 'from' if self.from_port: if self.from_port == self.to_port: proto_port = ("%s/%s" % (self.from_port, self.ip_protocol.lower())) else: proto_port = ("%s-%s/%s" % (self.from_port, self.to_port, self.ip_protocol.lower())) elif self.ip_protocol: try: ip_proto = int(self.ip_protocol) proto_port = "ip_proto=%d" % ip_proto except Exception: # well-defined IP protocol name like TCP, UDP, ICMP. proto_port = self.ip_protocol else: proto_port = '' return (_('ALLOW %(ethertype)s %(proto_port)s ' '%(direction)s %(remote)s') % {'ethertype': self.ethertype, 'proto_port': proto_port, 'remote': remote, 'direction': direction}) class SecurityGroupManager(object): """Manager class to implement Security Group methods SecurityGroup object returned from methods in this class must contains the following attributes: * id: ID of Security Group (int for Nova, uuid for Neutron) * name * description * tenant_id * rules: A list of SecurityGroupRule objects SecurityGroupRule object should have the following attributes (The attribute names and their formats are borrowed from nova security group implementation): * id * direction * ethertype * parent_group_id: security group the rule belongs to * ip_protocol * from_port: lower limit of allowed port range (inclusive) * to_port: upper limit of allowed port range (inclusive) * ip_range: remote IP CIDR (source for ingress, dest for egress). The value should be a format of "{'cidr': }" * group: remote security group. The value should be a format of "{'name': }" """ backend = 'neutron' def __init__(self, request): self.request = request self.client = neutronclient(request) def _list(self, **filters): secgroups = self.client.list_security_groups(**filters) return [SecurityGroup(sg) for sg in secgroups.get('security_groups')] @profiler.trace def list(self, **params): """Fetches a list all security groups. :returns: List of SecurityGroup objects """ # This is to ensure tenant_id key is not populated # if tenant_id=None is specified. tenant_id = params.pop('tenant_id', self.request.user.tenant_id) if tenant_id: params['tenant_id'] = tenant_id return self._list(**params) def _sg_name_dict(self, sg_id, rules): """Create a mapping dict from secgroup id to its name.""" related_ids = set([sg_id]) related_ids |= set(filter(None, [r['remote_group_id'] for r in rules])) related_sgs = self.client.list_security_groups(id=related_ids, fields=['id', 'name']) related_sgs = related_sgs.get('security_groups') return dict((sg['id'], sg['name']) for sg in related_sgs) @profiler.trace def get(self, sg_id): """Fetches the security group. :returns: SecurityGroup object corresponding to sg_id """ secgroup = self.client.show_security_group(sg_id).get('security_group') sg_dict = self._sg_name_dict(sg_id, secgroup['security_group_rules']) return SecurityGroup(secgroup, sg_dict) @profiler.trace def create(self, name, desc): """Create a new security group. :returns: SecurityGroup object created """ body = {'security_group': {'name': name, 'description': desc, 'tenant_id': self.request.user.project_id}} secgroup = self.client.create_security_group(body) return SecurityGroup(secgroup.get('security_group')) @profiler.trace def update(self, sg_id, name, desc): body = {'security_group': {'name': name, 'description': desc}} secgroup = self.client.update_security_group(sg_id, body) return SecurityGroup(secgroup.get('security_group')) @profiler.trace def delete(self, sg_id): """Delete the specified security group.""" self.client.delete_security_group(sg_id) @profiler.trace def rule_create(self, parent_group_id, direction=None, ethertype=None, ip_protocol=None, from_port=None, to_port=None, cidr=None, group_id=None, description=None): """Create a new security group rule. :param parent_group_id: security group id a rule is created to :param direction: ``ingress`` or ``egress`` :param ethertype: ``IPv4`` or ``IPv6`` :param ip_protocol: tcp, udp, icmp :param from_port: L4 port range min :param to_port: L4 port range max :param cidr: Remote IP CIDR :param group_id: ID of Source Security Group :returns: SecurityGroupRule object """ if not cidr: cidr = None if from_port < 0: from_port = None if to_port < 0: to_port = None if isinstance(ip_protocol, int) and ip_protocol < 0: ip_protocol = None params = {'security_group_id': parent_group_id, 'direction': direction, 'ethertype': ethertype, 'protocol': ip_protocol, 'port_range_min': from_port, 'port_range_max': to_port, 'remote_ip_prefix': cidr, 'remote_group_id': group_id} if description is not None: params['description'] = description body = {'security_group_rule': params} try: rule = self.client.create_security_group_rule(body) except neutron_exc.OverQuotaClient: raise exceptions.Conflict( _('Security group rule quota exceeded.')) except neutron_exc.Conflict: raise exceptions.Conflict( _('Security group rule already exists.')) rule = rule.get('security_group_rule') sg_dict = self._sg_name_dict(parent_group_id, [rule]) return SecurityGroupRule(rule, sg_dict) @profiler.trace def rule_delete(self, sgr_id): """Delete the specified security group rule.""" self.client.delete_security_group_rule(sgr_id) @profiler.trace def list_by_instance(self, instance_id): """Gets security groups of an instance. :returns: List of SecurityGroup objects associated with the instance """ ports = port_list(self.request, device_id=instance_id) sg_ids = [] for p in ports: sg_ids += p.security_groups return self._list(id=set(sg_ids)) if sg_ids else [] @profiler.trace def update_instance_security_group(self, instance_id, new_security_group_ids): """Update security groups of a specified instance.""" ports = port_list(self.request, device_id=instance_id) for p in ports: params = {'security_groups': new_security_group_ids} port_update(self.request, p.id, **params) class FloatingIp(base.APIDictWrapper): _attrs = ['id', 'ip', 'fixed_ip', 'port_id', 'instance_id', 'instance_type', 'pool'] def __init__(self, fip): fip['ip'] = fip['floating_ip_address'] fip['fixed_ip'] = fip['fixed_ip_address'] fip['pool'] = fip['floating_network_id'] super(FloatingIp, self).__init__(fip) class FloatingIpPool(base.APIDictWrapper): pass class FloatingIpTarget(base.APIDictWrapper): """Representation of floating IP association target. The following parameter needs to be passed when instantiating the class: :param port: ``Port`` object which represents a neutron port. :param ip_address: IP address of the ``port``. It must be one of IP address of a given port. :param label: String displayed in the floating IP association form. IP address will be appended to a specified label. """ def __init__(self, port, ip_address, label): name = '%s: %s' % (label, ip_address) if label else ip_address target = {'name': name, 'id': '%s_%s' % (port.id, ip_address), 'port_id': port.id, 'instance_id': port.device_id} super(FloatingIpTarget, self).__init__(target) class FloatingIpManager(object): """Manager class to implement Floating IP methods The FloatingIP object returned from methods in this class must contains the following attributes: * id: ID of Floating IP * ip: Floating IP address * pool: ID of Floating IP pool from which the address is allocated * fixed_ip: Fixed IP address of a VIF associated with the address * port_id: ID of a VIF associated with the address (instance_id when Nova floating IP is used) * instance_id: Instance ID of an associated with the Floating IP """ device_owner_map = { 'compute:': 'compute', 'neutron:LOADBALANCER': 'loadbalancer', } def __init__(self, request): self.request = request self.client = neutronclient(request) @profiler.trace def list_pools(self): """Fetches a list of all floating IP pools. :returns: List of FloatingIpPool objects """ search_opts = {'router:external': True} return [FloatingIpPool(pool) for pool in self.client.list_networks(**search_opts).get('networks')] def _get_instance_type_from_device_owner(self, device_owner): for key, value in self.device_owner_map.items(): if device_owner.startswith(key): return value return device_owner def _set_instance_info(self, fip, port=None): if fip['port_id']: if not port: port = port_get(self.request, fip['port_id']) fip['instance_id'] = port.device_id fip['instance_type'] = self._get_instance_type_from_device_owner( port.device_owner) else: fip['instance_id'] = None fip['instance_type'] = None @profiler.trace def list(self, all_tenants=False, **search_opts): """Fetches a list of all floating IPs. :returns: List of FloatingIp object """ if not all_tenants: tenant_id = self.request.user.tenant_id # In Neutron, list_floatingips returns Floating IPs from # all tenants when the API is called with admin role, so # we need to filter them with tenant_id. search_opts['tenant_id'] = tenant_id port_search_opts = {'tenant_id': tenant_id} else: port_search_opts = {} fips = self.client.list_floatingips(**search_opts) fips = fips.get('floatingips') # Get port list to add instance_id to floating IP list # instance_id is stored in device_id attribute ports = port_list(self.request, **port_search_opts) port_dict = collections.OrderedDict([(p['id'], p) for p in ports]) for fip in fips: self._set_instance_info(fip, port_dict.get(fip['port_id'])) return [FloatingIp(fip) for fip in fips] @profiler.trace def get(self, floating_ip_id): """Fetches the floating IP. :returns: FloatingIp object corresponding to floating_ip_id """ fip = self.client.show_floatingip(floating_ip_id).get('floatingip') self._set_instance_info(fip) return FloatingIp(fip) @profiler.trace def allocate(self, pool, tenant_id=None, **params): """Allocates a floating IP to the tenant. You must provide a pool name or id for which you would like to allocate a floating IP. :returns: FloatingIp object corresponding to an allocated floating IP """ if not tenant_id: tenant_id = self.request.user.project_id create_dict = {'floating_network_id': pool, 'tenant_id': tenant_id} if 'subnet_id' in params: create_dict['subnet_id'] = params['subnet_id'] if 'floating_ip_address' in params: create_dict['floating_ip_address'] = params['floating_ip_address'] if 'description' in params: create_dict['description'] = params['description'] fip = self.client.create_floatingip( {'floatingip': create_dict}).get('floatingip') self._set_instance_info(fip) return FloatingIp(fip) @profiler.trace def release(self, floating_ip_id): """Releases a floating IP specified.""" self.client.delete_floatingip(floating_ip_id) @profiler.trace def associate(self, floating_ip_id, port_id): """Associates the floating IP to the port. ``port_id`` represents a VNIC of an instance. ``port_id`` argument is different from a normal neutron port ID. A value passed as ``port_id`` must be one of target_id returned by ``list_targets``, ``get_target_by_instance`` or ``list_targets_by_instance`` method. """ # NOTE: In Neutron Horizon floating IP support, port_id is # "_" format to identify multiple ports. pid, ip_address = port_id.split('_', 1) update_dict = {'port_id': pid, 'fixed_ip_address': ip_address} self.client.update_floatingip(floating_ip_id, {'floatingip': update_dict}) @profiler.trace def disassociate(self, floating_ip_id): """Disassociates the floating IP specified.""" update_dict = {'port_id': None} self.client.update_floatingip(floating_ip_id, {'floatingip': update_dict}) def _get_reachable_subnets(self, ports, fetch_router_ports=False): if not is_enabled_by_config('enable_fip_topology_check', True): # All subnets are reachable from external network return set( p.fixed_ips[0]['subnet_id'] for p in ports if p.fixed_ips ) # Retrieve subnet list reachable from external network ext_net_ids = [ext_net.id for ext_net in self.list_pools()] gw_routers = [r.id for r in router_list(self.request) if (r.external_gateway_info and r.external_gateway_info.get('network_id') in ext_net_ids)] if fetch_router_ports: router_ports = port_list(self.request, device_owner=ROUTER_INTERFACE_OWNERS) else: router_ports = [p for p in ports if p.device_owner in ROUTER_INTERFACE_OWNERS] reachable_subnets = set([p.fixed_ips[0]['subnet_id'] for p in router_ports if p.device_id in gw_routers]) # we have to include any shared subnets as well because we may not # have permission to see the router interface to infer connectivity shared = set([s.id for n in network_list(self.request, shared=True) for s in n.subnets]) return reachable_subnets | shared @profiler.trace def list_targets(self): """Returns a list of association targets of instance VIFs. Each association target is represented as FloatingIpTarget object. FloatingIpTarget is a APIResourceWrapper/APIDictWrapper and 'id' and 'name' attributes must be defined in each object. FloatingIpTarget.id can be passed as port_id in associate(). FloatingIpTarget.name is displayed in Floating Ip Association Form. """ tenant_id = self.request.user.tenant_id ports = port_list(self.request, tenant_id=tenant_id) servers, has_more = nova.server_list(self.request, detailed=False) server_dict = collections.OrderedDict( [(s.id, s.name) for s in servers]) reachable_subnets = self._get_reachable_subnets(ports) targets = [] for p in ports: # Remove network ports from Floating IP targets if p.device_owner.startswith('network:'): continue server_name = server_dict.get(p.device_id) for ip in p.fixed_ips: if ip['subnet_id'] not in reachable_subnets: continue # Floating IPs can only target IPv4 addresses. if netaddr.IPAddress(ip['ip_address']).version != 4: continue targets.append(FloatingIpTarget(p, ip['ip_address'], server_name)) return targets def _target_ports_by_instance(self, instance_id): if not instance_id: return None search_opts = {'device_id': instance_id} return port_list(self.request, **search_opts) @profiler.trace def list_targets_by_instance(self, instance_id, target_list=None): """Returns a list of FloatingIpTarget objects of FIP association. :param instance_id: ID of target VM instance :param target_list: (optional) a list returned by list_targets(). If specified, looking up is done against the specified list to save extra API calls to a back-end. Otherwise target list is retrieved from a back-end inside the method. """ if target_list is not None: # We assume that target_list was returned by list_targets() # so we can assume checks for subnet reachability and IP version # have been done already. We skip all checks here. return [target for target in target_list if target['instance_id'] == instance_id] else: ports = self._target_ports_by_instance(instance_id) reachable_subnets = self._get_reachable_subnets( ports, fetch_router_ports=True) name = self._get_server_name(instance_id) targets = [] for p in ports: for ip in p.fixed_ips: if ip['subnet_id'] not in reachable_subnets: continue # Floating IPs can only target IPv4 addresses. if netaddr.IPAddress(ip['ip_address']).version != 4: continue targets.append(FloatingIpTarget(p, ip['ip_address'], name)) return targets def _get_server_name(self, server_id): try: server = nova.server_get(self.request, server_id) return server.name except nova_exc.NotFound: return '' def is_simple_associate_supported(self): """Returns True if the default floating IP pool is enabled.""" # NOTE: There are two reason that simple association support # needs more considerations. (1) Neutron does not support the # default floating IP pool at the moment. It can be avoided # in case where only one floating IP pool exists. # (2) Neutron floating IP is associated with each VIF and # we need to check whether such VIF is only one for an instance # to enable simple association support. return False def is_supported(self): """Returns True if floating IP feature is supported.""" network_config = getattr(settings, 'OPENSTACK_NEUTRON_NETWORK', {}) return network_config.get('enable_router', True) def get_ipver_str(ip_version): """Convert an ip version number to a human-friendly string.""" return IP_VERSION_DICT.get(ip_version, '') def get_auth_params_from_request(request): return ( request.user.token.id, base.url_for(request, 'network'), base.url_for(request, 'identity') ) @memoized_with_request(get_auth_params_from_request) def neutronclient(request_auth_params): token_id, neutron_url, auth_url = request_auth_params insecure = getattr(settings, 'OPENSTACK_SSL_NO_VERIFY', False) cacert = getattr(settings, 'OPENSTACK_SSL_CACERT', None) c = neutron_client.Client(token=token_id, auth_url=auth_url, endpoint_url=neutron_url, insecure=insecure, ca_cert=cacert) return c @profiler.trace def list_resources_with_long_filters(list_method, filter_attr, filter_values, **params): """List neutron resources with handling RequestURITooLong exception. If filter parameters are long, list resources API request leads to 414 error (URL is too long). For such case, this method split list parameters specified by a list_field argument into chunks and call the specified list_method repeatedly. :param list_method: Method used to retrieve resource list. :param filter_attr: attribute name to be filtered. The value corresponding to this attribute is specified by "filter_values". If you want to specify more attributes for a filter condition, pass them as keyword arguments like "attr2=values2". :param filter_values: values of "filter_attr" to be filtered. If filter_values are too long and the total URI length exceed the maximum length supported by the neutron server, filter_values will be split into sub lists if filter_values is a list. :param params: parameters to pass a specified listing API call without any changes. You can specify more filter conditions in addition to a pair of filter_attr and filter_values. """ try: params[filter_attr] = filter_values return list_method(**params) except neutron_exc.RequestURITooLong as uri_len_exc: # The URI is too long because of too many filter values. # Use the excess attribute of the exception to know how many # filter values can be inserted into a single request. # We consider only the filter condition from (filter_attr, # filter_values) and do not consider other filter conditions # which may be specified in **params. if not isinstance(filter_values, (list, tuple, set, frozenset)): filter_values = [filter_values] # Length of each query filter is: # =& (e.g., id=) # The length will be key_len + value_maxlen + 2 all_filter_len = sum(len(filter_attr) + len(val) + 2 for val in filter_values) allowed_filter_len = all_filter_len - uri_len_exc.excess val_maxlen = max(len(val) for val in filter_values) filter_maxlen = len(filter_attr) + val_maxlen + 2 chunk_size = allowed_filter_len // filter_maxlen resources = [] for i in range(0, len(filter_values), chunk_size): params[filter_attr] = filter_values[i:i + chunk_size] resources.extend(list_method(**params)) return resources @profiler.trace def trunk_show(request, trunk_id): LOG.debug("trunk_show(): trunk_id=%s", trunk_id) trunk = neutronclient(request).show_trunk(trunk_id).get('trunk') return Trunk(trunk) @profiler.trace def trunk_list(request, **params): LOG.debug("trunk_list(): params=%s", params) trunks = neutronclient(request).list_trunks(**params).get('trunks') return [Trunk(t) for t in trunks] @profiler.trace def trunk_create(request, **params): LOG.debug("trunk_create(): params=%s", params) if 'project_id' not in params: params['project_id'] = request.user.project_id body = {'trunk': params} trunk = neutronclient(request).create_trunk(body=body).get('trunk') return Trunk(trunk) @profiler.trace def trunk_delete(request, trunk_id): LOG.debug("trunk_delete(): trunk_id=%s", trunk_id) neutronclient(request).delete_trunk(trunk_id) def _prepare_body_update_trunk(prop_diff): """Prepare body for PUT /v2.0/trunks/TRUNK_ID.""" return {'trunk': prop_diff} def _prepare_body_remove_subports(subports): """Prepare body for PUT /v2.0/trunks/TRUNK_ID/remove_subports.""" return {'sub_ports': [{'port_id': sp['port_id']} for sp in subports]} def _prepare_body_add_subports(subports): """Prepare body for PUT /v2.0/trunks/TRUNK_ID/add_subports.""" return {'sub_ports': subports} @profiler.trace def trunk_update(request, trunk_id, old_trunk, new_trunk): """Handle update to a trunk in (at most) three neutron calls. The JavaScript side should know only about the old and new state of a trunk. However it should not know anything about how the old and new are meant to be diffed and sent to neutron. We handle that here. This code was adapted from Heat, see: https://review.openstack.org/442496 Call #1) Update all changed properties but 'sub_ports'. PUT /v2.0/trunks/TRUNK_ID openstack network trunk set Call #2) Delete subports not needed anymore. PUT /v2.0/trunks/TRUNK_ID/remove_subports openstack network trunk unset --subport Call #3) Create new subports. PUT /v2.0/trunks/TRUNK_ID/add_subports openstack network trunk set --subport A single neutron port cannot be two subports at the same time (ie. have two segmentation (type, ID)s on the same trunk or to belong to two trunks). Therefore we have to delete old subports before creating new ones to avoid conflicts. """ LOG.debug("trunk_update(): trunk_id=%s", trunk_id) # NOTE(bence romsics): We want to do set operations on the subports, # however we receive subports represented as dicts. In Python # mutable objects like dicts are not hashable so they cannot be # inserted into sets. So we convert subport dicts to (immutable) # frozensets in order to do the set operations. def dict2frozenset(d): """Convert a dict to a frozenset. Create an immutable equivalent of a dict, so it's hashable therefore can be used as an element of a set or a key of another dictionary. """ return frozenset(d.items()) # cf. neutron_lib/api/definitions/trunk.py updatable_props = ('admin_state_up', 'description', 'name') prop_diff = { k: new_trunk[k] for k in updatable_props if old_trunk[k] != new_trunk[k]} subports_old = {dict2frozenset(d): d for d in old_trunk.get('sub_ports', [])} subports_new = {dict2frozenset(d): d for d in new_trunk.get('sub_ports', [])} old_set = set(subports_old.keys()) new_set = set(subports_new.keys()) delete = old_set - new_set create = new_set - old_set dicts_delete = [subports_old[fs] for fs in delete] dicts_create = [subports_new[fs] for fs in create] trunk = old_trunk if prop_diff: LOG.debug('trunk_update(): update properties of trunk %s: %s', trunk_id, prop_diff) body = _prepare_body_update_trunk(prop_diff) trunk = neutronclient(request).update_trunk( trunk_id, body=body).get('trunk') if dicts_delete: LOG.debug('trunk_update(): delete subports of trunk %s: %s', trunk_id, dicts_delete) body = _prepare_body_remove_subports(dicts_delete) trunk = neutronclient(request).trunk_remove_subports( trunk_id, body=body) if dicts_create: LOG.debug('trunk_update(): create subports of trunk %s: %s', trunk_id, dicts_create) body = _prepare_body_add_subports(dicts_create) trunk = neutronclient(request).trunk_add_subports( trunk_id, body=body) return Trunk(trunk) @profiler.trace def network_list(request, **params): LOG.debug("network_list(): params=%s", params) networks = neutronclient(request).list_networks(**params).get('networks') # Get subnet list to expand subnet info in network list. subnets = subnet_list(request) subnet_dict = dict([(s['id'], s) for s in subnets]) # Expand subnet list from subnet_id to values. for n in networks: # Due to potential timing issues, we can't assume the subnet_dict data # is in sync with the network data. n['subnets'] = [subnet_dict[s] for s in n.get('subnets', []) if s in subnet_dict] return [Network(n) for n in networks] def _is_auto_allocated_network_supported(request): try: neutron_auto_supported = is_service_enabled( request, 'enable_auto_allocated_network', 'auto-allocated-topology', default=False) except Exception: exceptions.handle(request, _('Failed to check if neutron supports ' '"auto_alloocated_network".')) neutron_auto_supported = False if not neutron_auto_supported: return False try: # server_create needs to support both features, # so we need to pass both features here. nova_auto_supported = nova.is_feature_available( request, ("instance_description", "auto_allocated_network")) except Exception: exceptions.handle(request, _('Failed to check if nova supports ' '"auto_alloocated_network".')) nova_auto_supported = False return nova_auto_supported @profiler.trace def network_list_for_tenant(request, tenant_id, include_external=False, include_pre_auto_allocate=False, **params): """Return a network list available for the tenant. The list contains networks owned by the tenant and public networks. If requested_networks specified, it searches requested_networks only. """ LOG.debug("network_list_for_tenant(): tenant_id=%(tenant_id)s, " "params=%(params)s", {'tenant_id': tenant_id, 'params': params}) networks = [] shared = params.get('shared') if shared is not None: del params['shared'] if shared in (None, False): # If a user has admin role, network list returned by Neutron API # contains networks that do not belong to that tenant. # So we need to specify tenant_id when calling network_list(). networks += network_list(request, tenant_id=tenant_id, shared=False, **params) if shared in (None, True): # In the current Neutron API, there is no way to retrieve # both owner networks and public networks in a single API call. networks += network_list(request, shared=True, **params) # Hack for auto allocated network if include_pre_auto_allocate and not networks: if _is_auto_allocated_network_supported(request): networks.append(PreAutoAllocateNetwork(request)) params['router:external'] = params.get('router:external', True) if params['router:external'] and include_external: if shared is not None: params['shared'] = shared fetched_net_ids = [n.id for n in networks] # Retrieves external networks when router:external is not specified # in (filtering) params or router:external=True filter is specified. # When router:external=False is specified there is no need to query # networking API because apparently nothing will match the filter. ext_nets = network_list(request, **params) networks += [n for n in ext_nets if n.id not in fetched_net_ids] return networks @profiler.trace def network_get(request, network_id, expand_subnet=True, **params): LOG.debug("network_get(): netid=%(network_id)s, params=%(params)s", {'network_id': network_id, 'params': params}) network = neutronclient(request).show_network(network_id, **params).get('network') if expand_subnet: # NOTE(amotoki): There are some cases where a user has no permission # to get subnet details, but the condition is complicated. We first # try to fetch subnet details. If successful, the subnet details are # set to network['subnets'] as a list of "Subent" object. # If NotFound exception is returned by neutron, network['subnets'] is # left untouched and a list of subnet IDs are stored. # Neutron returns NotFound exception if a request user has enough # permission to access a requested resource, so we catch only # NotFound exception here. try: # Since the number of subnets per network must be small, # call subnet_get() for each subnet instead of calling # subnet_list() once. network['subnets'] = [subnet_get(request, sid) for sid in network['subnets']] except neutron_exc.NotFound: pass return Network(network) @profiler.trace def network_create(request, **kwargs): """Create a network object. :param request: request context :param tenant_id: (optional) tenant id of the network created :param name: (optional) name of the network created :returns: Network object """ LOG.debug("network_create(): kwargs = %s", kwargs) if 'tenant_id' not in kwargs: kwargs['tenant_id'] = request.user.project_id body = {'network': kwargs} network = neutronclient(request).create_network(body=body).get('network') return Network(network) @profiler.trace def network_update(request, network_id, **kwargs): LOG.debug("network_update(): netid=%(network_id)s, params=%(params)s", {'network_id': network_id, 'params': kwargs}) body = {'network': kwargs} network = neutronclient(request).update_network(network_id, body=body).get('network') return Network(network) @profiler.trace def network_delete(request, network_id): LOG.debug("network_delete(): netid=%s", network_id) neutronclient(request).delete_network(network_id) @profiler.trace @memoized def subnet_list(request, **params): LOG.debug("subnet_list(): params=%s", params) subnets = neutronclient(request).list_subnets(**params).get('subnets') return [Subnet(s) for s in subnets] @profiler.trace def subnet_get(request, subnet_id, **params): LOG.debug("subnet_get(): subnetid=%(subnet_id)s, params=%(params)s", {'subnet_id': subnet_id, 'params': params}) subnet = neutronclient(request).show_subnet(subnet_id, **params).get('subnet') return Subnet(subnet) @profiler.trace def subnet_create(request, network_id, **kwargs): """Create a subnet on a specified network. :param request: request context :param network_id: network id a subnet is created on :param cidr: (optional) subnet IP address range :param ip_version: (optional) IP version (4 or 6) :param gateway_ip: (optional) IP address of gateway :param tenant_id: (optional) tenant id of the subnet created :param name: (optional) name of the subnet created :param subnetpool_id: (optional) subnetpool to allocate prefix from :param prefixlen: (optional) length of prefix to allocate :returns: Subnet object Although both cidr+ip_version and subnetpool_id+preifxlen is listed as optional you MUST pass along one of the combinations to get a successful result. """ LOG.debug("subnet_create(): netid=%(network_id)s, kwargs=%(kwargs)s", {'network_id': network_id, 'kwargs': kwargs}) body = {'subnet': {'network_id': network_id}} if 'tenant_id' not in kwargs: kwargs['tenant_id'] = request.user.project_id body['subnet'].update(kwargs) subnet = neutronclient(request).create_subnet(body=body).get('subnet') return Subnet(subnet) @profiler.trace def subnet_update(request, subnet_id, **kwargs): LOG.debug("subnet_update(): subnetid=%(subnet_id)s, kwargs=%(kwargs)s", {'subnet_id': subnet_id, 'kwargs': kwargs}) body = {'subnet': kwargs} subnet = neutronclient(request).update_subnet(subnet_id, body=body).get('subnet') return Subnet(subnet) @profiler.trace def subnet_delete(request, subnet_id): LOG.debug("subnet_delete(): subnetid=%s", subnet_id) neutronclient(request).delete_subnet(subnet_id) @profiler.trace def subnetpool_list(request, **params): LOG.debug("subnetpool_list(): params=%s", params) subnetpools = \ neutronclient(request).list_subnetpools(**params).get('subnetpools') return [SubnetPool(s) for s in subnetpools] @profiler.trace def subnetpool_get(request, subnetpool_id, **params): LOG.debug("subnetpool_get(): subnetpoolid=%(subnetpool_id)s, " "params=%(params)s", {'subnetpool_id': subnetpool_id, 'params': params}) subnetpool = \ neutronclient(request).show_subnetpool(subnetpool_id, **params).get('subnetpool') return SubnetPool(subnetpool) @profiler.trace def subnetpool_create(request, name, prefixes, **kwargs): """Create a subnetpool. ip_version is auto-detected in back-end. Parameters: request -- Request context name -- Name for subnetpool prefixes -- List of prefixes for pool Keyword Arguments (optional): min_prefixlen -- Minimum prefix length for allocations from pool max_prefixlen -- Maximum prefix length for allocations from pool default_prefixlen -- Default prefix length for allocations from pool default_quota -- Default quota for allocations from pool shared -- Subnetpool should be shared (Admin-only) tenant_id -- Owner of subnetpool Returns: SubnetPool object """ LOG.debug("subnetpool_create(): name=%(name)s, prefixes=%(prefixes)s, " "kwargs=%(kwargs)s", {'name': name, 'prefixes': prefixes, 'kwargs': kwargs}) body = {'subnetpool': {'name': name, 'prefixes': prefixes, } } if 'tenant_id' not in kwargs: kwargs['tenant_id'] = request.user.project_id body['subnetpool'].update(kwargs) subnetpool = \ neutronclient(request).create_subnetpool(body=body).get('subnetpool') return SubnetPool(subnetpool) @profiler.trace def subnetpool_update(request, subnetpool_id, **kwargs): LOG.debug("subnetpool_update(): subnetpoolid=%(subnetpool_id)s, " "kwargs=%(kwargs)s", {'subnetpool_id': subnetpool_id, 'kwargs': kwargs}) body = {'subnetpool': kwargs} subnetpool = \ neutronclient(request).update_subnetpool(subnetpool_id, body=body).get('subnetpool') return SubnetPool(subnetpool) @profiler.trace def subnetpool_delete(request, subnetpool_id): LOG.debug("subnetpool_delete(): subnetpoolid=%s", subnetpool_id) return neutronclient(request).delete_subnetpool(subnetpool_id) @profiler.trace @memoized def port_list(request, **params): LOG.debug("port_list(): params=%s", params) ports = neutronclient(request).list_ports(**params).get('ports') return [Port(p) for p in ports] @profiler.trace @memoized def port_list_with_trunk_types(request, **params): """List neutron Ports for this tenant with possible TrunkPort indicated :param request: request context NOTE Performing two API calls is not atomic, but this is not worse than the original idea when we call port_list repeatedly for each network to perform identification run-time. We should handle the inconsistencies caused by non-atomic API requests gracefully. """ LOG.debug("port_list_with_trunk_types(): params=%s", params) # When trunk feature is disabled in neutron, we have no need to fetch # trunk information and port_list() is enough. if not is_extension_supported(request, 'trunk'): return port_list(request, **params) ports = neutronclient(request).list_ports(**params)['ports'] trunk_filters = {} if 'tenant_id' in params: trunk_filters['tenant_id'] = params['tenant_id'] trunks = neutronclient(request).list_trunks(**trunk_filters)['trunks'] parent_ports = set([t['port_id'] for t in trunks]) # Create a dict map for child ports (port ID to trunk info) child_ports = dict([(s['port_id'], {'trunk_id': t['id'], 'segmentation_type': s['segmentation_type'], 'segmentation_id': s['segmentation_id']}) for t in trunks for s in t['sub_ports']]) def _get_port_info(port): if port['id'] in parent_ports: return PortTrunkParent(port) elif port['id'] in child_ports: return PortTrunkSubport(port, child_ports[port['id']]) else: return Port(port) return [_get_port_info(p) for p in ports] @profiler.trace def port_get(request, port_id, **params): LOG.debug("port_get(): portid=%(port_id)s, params=%(params)s", {'port_id': port_id, 'params': params}) port = neutronclient(request).show_port(port_id, **params).get('port') return Port(port) def unescape_port_kwargs(**kwargs): for key in kwargs: if '__' in key: kwargs[':'.join(key.split('__'))] = kwargs.pop(key) return kwargs @profiler.trace def port_create(request, network_id, **kwargs): """Create a port on a specified network. :param request: request context :param network_id: network id a subnet is created on :param device_id: (optional) device id attached to the port :param tenant_id: (optional) tenant id of the port created :param name: (optional) name of the port created :returns: Port object """ LOG.debug("port_create(): netid=%(network_id)s, kwargs=%(kwargs)s", {'network_id': network_id, 'kwargs': kwargs}) kwargs = unescape_port_kwargs(**kwargs) body = {'port': {'network_id': network_id}} if 'tenant_id' not in kwargs: kwargs['tenant_id'] = request.user.project_id body['port'].update(kwargs) port = neutronclient(request).create_port(body=body).get('port') return Port(port) @profiler.trace def port_delete(request, port_id): LOG.debug("port_delete(): portid=%s", port_id) neutronclient(request).delete_port(port_id) @profiler.trace def port_update(request, port_id, **kwargs): LOG.debug("port_update(): portid=%(port_id)s, kwargs=%(kwargs)s", {'port_id': port_id, 'kwargs': kwargs}) kwargs = unescape_port_kwargs(**kwargs) body = {'port': kwargs} port = neutronclient(request).update_port(port_id, body=body).get('port') return Port(port) @profiler.trace def router_create(request, **kwargs): LOG.debug("router_create():, kwargs=%s", kwargs) body = {'router': {}} if 'tenant_id' not in kwargs: kwargs['tenant_id'] = request.user.project_id body['router'].update(kwargs) router = neutronclient(request).create_router(body=body).get('router') return Router(router) @profiler.trace def router_update(request, r_id, **kwargs): LOG.debug("router_update(): router_id=%(r_id)s, kwargs=%(kwargs)s", {'r_id': r_id, 'kwargs': kwargs}) body = {'router': {}} body['router'].update(kwargs) router = neutronclient(request).update_router(r_id, body=body) return Router(router['router']) @profiler.trace def router_get(request, router_id, **params): router = neutronclient(request).show_router(router_id, **params).get('router') return Router(router) @profiler.trace def router_list(request, **params): routers = neutronclient(request).list_routers(**params).get('routers') return [Router(r) for r in routers] @profiler.trace def router_list_on_l3_agent(request, l3_agent_id, **params): routers = neutronclient(request).\ list_routers_on_l3_agent(l3_agent_id, **params).get('routers') return [Router(r) for r in routers] @profiler.trace def router_delete(request, router_id): neutronclient(request).delete_router(router_id) @profiler.trace def router_add_interface(request, router_id, subnet_id=None, port_id=None): body = {} if subnet_id: body['subnet_id'] = subnet_id if port_id: body['port_id'] = port_id client = neutronclient(request) return client.add_interface_router(router_id, body) @profiler.trace def router_remove_interface(request, router_id, subnet_id=None, port_id=None): body = {} if subnet_id: body['subnet_id'] = subnet_id if port_id: body['port_id'] = port_id neutronclient(request).remove_interface_router(router_id, body) @profiler.trace def router_add_gateway(request, router_id, network_id, enable_snat=None): body = {'network_id': network_id} if enable_snat is not None: body['enable_snat'] = enable_snat neutronclient(request).add_gateway_router(router_id, body) @profiler.trace def router_remove_gateway(request, router_id): neutronclient(request).remove_gateway_router(router_id) @profiler.trace def router_static_route_list(request, router_id=None): router = router_get(request, router_id) try: routes = [RouterStaticRoute(r) for r in router.routes] except AttributeError: LOG.debug("router_static_route_list(): router_id=%(router_id)s, " "router=%(router)s", {'router_id': router_id, 'router': router}) return [] return routes @profiler.trace def router_static_route_remove(request, router_id, route_ids): currentroutes = router_static_route_list(request, router_id=router_id) newroutes = [] for oldroute in currentroutes: if oldroute.id not in route_ids: newroutes.append({'nexthop': oldroute.nexthop, 'destination': oldroute.destination}) body = {'routes': newroutes} new = router_update(request, router_id, **body) return new @profiler.trace def router_static_route_add(request, router_id, newroute): body = {} currentroutes = router_static_route_list(request, router_id=router_id) body['routes'] = [newroute] + [{'nexthop': r.nexthop, 'destination': r.destination} for r in currentroutes] new = router_update(request, router_id, **body) return new @profiler.trace def tenant_quota_get(request, tenant_id): return base.QuotaSet(neutronclient(request).show_quota(tenant_id)['quota']) @profiler.trace def tenant_quota_update(request, tenant_id, **kwargs): quotas = {'quota': kwargs} return neutronclient(request).update_quota(tenant_id, quotas) @profiler.trace def tenant_quota_detail_get(request, tenant_id=None): tenant_id = tenant_id or request.user.tenant_id response = neutronclient(request).get('/quotas/%s/details' % tenant_id) return response['quota'] @profiler.trace def default_quota_get(request, tenant_id=None): tenant_id = tenant_id or request.user.tenant_id response = neutronclient(request).show_quota_default(tenant_id) return base.QuotaSet(response['quota']) @profiler.trace def agent_list(request, **params): agents = neutronclient(request).list_agents(**params) return [Agent(a) for a in agents['agents']] @profiler.trace def list_dhcp_agent_hosting_networks(request, network, **params): agents = neutronclient(request).list_dhcp_agent_hosting_networks(network, **params) return [Agent(a) for a in agents['agents']] @profiler.trace def list_l3_agent_hosting_router(request, router, **params): agents = neutronclient(request).list_l3_agent_hosting_routers(router, **params) return [Agent(a) for a in agents['agents']] @profiler.trace def show_network_ip_availability(request, network_id): ip_availability = neutronclient(request).show_network_ip_availability( network_id) return ip_availability @profiler.trace def add_network_to_dhcp_agent(request, dhcp_agent, network_id): body = {'network_id': network_id} return neutronclient(request).add_network_to_dhcp_agent(dhcp_agent, body) @profiler.trace def remove_network_from_dhcp_agent(request, dhcp_agent, network_id): return neutronclient(request).remove_network_from_dhcp_agent(dhcp_agent, network_id) @profiler.trace def provider_list(request): providers = neutronclient(request).list_service_providers() return providers['service_providers'] def floating_ip_pools_list(request): return FloatingIpManager(request).list_pools() @memoized def tenant_floating_ip_list(request, all_tenants=False): return FloatingIpManager(request).list(all_tenants=all_tenants) def tenant_floating_ip_get(request, floating_ip_id): return FloatingIpManager(request).get(floating_ip_id) def tenant_floating_ip_allocate(request, pool=None, tenant_id=None, **params): return FloatingIpManager(request).allocate(pool, tenant_id, **params) def tenant_floating_ip_release(request, floating_ip_id): return FloatingIpManager(request).release(floating_ip_id) def floating_ip_associate(request, floating_ip_id, port_id): return FloatingIpManager(request).associate(floating_ip_id, port_id) def floating_ip_disassociate(request, floating_ip_id): return FloatingIpManager(request).disassociate(floating_ip_id) def floating_ip_target_list(request): return FloatingIpManager(request).list_targets() def floating_ip_target_list_by_instance(request, instance_id, cache=None): return FloatingIpManager(request).list_targets_by_instance( instance_id, cache) def floating_ip_simple_associate_supported(request): return FloatingIpManager(request).is_simple_associate_supported() def floating_ip_supported(request): return FloatingIpManager(request).is_supported() @memoized def security_group_list(request, **params): return SecurityGroupManager(request).list(**params) def security_group_get(request, sg_id): return SecurityGroupManager(request).get(sg_id) def security_group_create(request, name, desc): return SecurityGroupManager(request).create(name, desc) def security_group_delete(request, sg_id): return SecurityGroupManager(request).delete(sg_id) def security_group_update(request, sg_id, name, desc): return SecurityGroupManager(request).update(sg_id, name, desc) def security_group_rule_create(request, parent_group_id, direction, ethertype, ip_protocol, from_port, to_port, cidr, group_id, description=None): return SecurityGroupManager(request).rule_create( parent_group_id, direction, ethertype, ip_protocol, from_port, to_port, cidr, group_id, description) def security_group_rule_delete(request, sgr_id): return SecurityGroupManager(request).rule_delete(sgr_id) def server_security_groups(request, instance_id): return SecurityGroupManager(request).list_by_instance(instance_id) def server_update_security_groups(request, instance_id, new_security_group_ids): return SecurityGroupManager(request).update_instance_security_group( instance_id, new_security_group_ids) # TODO(pkarikh) need to uncomment when osprofiler will have no # issues with unicode in: # openstack_dashboard/test/test_data/nova_data.py#L470 data # @profiler.trace def servers_update_addresses(request, servers, all_tenants=False): """Retrieve servers networking information from Neutron if enabled. Should be used when up to date networking information is required, and Nova's networking info caching mechanism is not fast enough. """ # NOTE(e0ne): we don't need to call neutron if we have no instances if not servers: return # Get all (filtered for relevant servers) information from Neutron try: # NOTE(e0ne): we need tuple here to work with @memoized decorator. # @memoized works with hashable arguments only. ports = list_resources_with_long_filters( port_list, 'device_id', tuple([instance.id for instance in servers]), request=request) fips = FloatingIpManager(request) if fips.is_supported(): floating_ips = list_resources_with_long_filters( fips.list, 'port_id', tuple([port.id for port in ports]), all_tenants=all_tenants) else: floating_ips = [] # NOTE(e0ne): we need frozenset here to work with @memoized decorator. # @memoized works with hashable arguments only networks = list_resources_with_long_filters( network_list, 'id', frozenset([port.network_id for port in ports]), request=request) except Exception as e: LOG.error('Unable to connect to Neutron: %s', e) error_message = _('Unable to connect to Neutron.') messages.error(request, error_message) return # Map instance to its ports instances_ports = collections.defaultdict(list) for port in ports: instances_ports[port.device_id].append(port) # Map port to its floating ips ports_floating_ips = collections.defaultdict(list) for fip in floating_ips: ports_floating_ips[fip.port_id].append(fip) # Map network id to its name network_names = dict(((network.id, network.name) for network in networks)) for server in servers: try: addresses = _server_get_addresses( request, server, instances_ports, ports_floating_ips, network_names) except Exception as e: LOG.error(six.text_type(e)) else: server.addresses = addresses def _server_get_addresses(request, server, ports, floating_ips, network_names): def _format_address(mac, ip, type): try: version = netaddr.IPAddress(ip).version except Exception as e: LOG.error('Unable to parse IP address %(ip)s: %(exc)s', {'ip': ip, 'exc': e}) error_message = _('Unable to parse IP address %s.') % ip messages.error(request, error_message) raise return {u'OS-EXT-IPS-MAC:mac_addr': mac, u'version': version, u'addr': ip, u'OS-EXT-IPS:type': type} addresses = collections.defaultdict(list) instance_ports = ports.get(server.id, []) for port in instance_ports: network_name = network_names.get(port.network_id) if network_name is not None: for fixed_ip in port.fixed_ips: addresses[network_name].append( _format_address(port.mac_address, fixed_ip['ip_address'], u'fixed')) port_fips = floating_ips.get(port.id, []) for fip in port_fips: addresses[network_name].append( _format_address(port.mac_address, fip.floating_ip_address, u'floating')) return dict(addresses) @profiler.trace @memoized_with_request(neutronclient) def list_extensions(neutron_api): """List neutron extensions. :param request: django request object """ try: extensions_list = neutron_api.list_extensions() except exceptions.ServiceCatalogException: return {} if 'extensions' in extensions_list: return tuple(extensions_list['extensions']) else: return () @profiler.trace def is_extension_supported(request, extension_alias): """Check if a specified extension is supported. :param request: django request object :param extension_alias: neutron extension alias """ extensions = list_extensions(request) for extension in extensions: if extension['alias'] == extension_alias: return True else: return False def is_enabled_by_config(name, default=True): network_config = getattr(settings, 'OPENSTACK_NEUTRON_NETWORK', {}) return network_config.get(name, default) @memoized def is_service_enabled(request, config_name, ext_name, default=True): return (is_enabled_by_config(config_name, default) and is_extension_supported(request, ext_name)) @memoized def is_quotas_extension_supported(request): return (is_enabled_by_config('enable_quotas', False) and is_extension_supported(request, 'quotas')) @memoized def is_router_enabled(request): return (is_enabled_by_config('enable_router') and is_extension_supported(request, 'router')) # FEATURE_MAP is used to define: # - related neutron extension name (key: "extension") # - corresponding dashboard config (key: "config") # - RBAC policies (key: "poclies") # If a key is not contained, the corresponding permission check is skipped. FEATURE_MAP = { 'dvr': { 'extension': 'dvr', 'config': { 'name': 'enable_distributed_router', 'default': False, }, 'policies': { 'get': 'get_router:distributed', 'create': 'create_router:distributed', 'update': 'update_router:distributed', } }, 'l3-ha': { 'extension': 'l3-ha', 'config': {'name': 'enable_ha_router', 'default': False}, 'policies': { 'get': 'get_router:ha', 'create': 'create_router:ha', 'update': 'update_router:ha', } }, 'ext-gw-mode': { 'extension': 'ext-gw-mode', 'policies': { 'create_router_enable_snat': 'create_router:external_gateway_info:enable_snat', 'update_router_enable_snat': 'update_router:external_gateway_info:enable_snat', } }, } def get_feature_permission(request, feature, operation=None): """Check if a feature-specific field can be displayed. This method check a permission for a feature-specific field. Such field is usually provided through Neutron extension. :param request: Request Object :param feature: feature name defined in FEATURE_MAP :param operation (optional): Operation type. The valid value should be defined in FEATURE_MAP[feature]['policies'] It must be specified if FEATURE_MAP[feature] has 'policies'. """ network_config = getattr(settings, 'OPENSTACK_NEUTRON_NETWORK', {}) feature_info = FEATURE_MAP.get(feature) if not feature_info: raise ValueError("The requested feature '%(feature)s' is unknown. " "Please make sure to specify a feature defined " "in FEATURE_MAP.") # Check dashboard settings feature_config = feature_info.get('config') if feature_config: if not network_config.get(feature_config['name'], feature_config['default']): return False # Check policy feature_policies = feature_info.get('policies') if feature_policies: policy_name = feature_policies.get(operation) if not policy_name: raise ValueError("The 'operation' parameter for " "get_feature_permission '%(feature)s' " "is invalid. It should be one of %(allowed)s" % {'feature': feature, 'allowed': ' '.join(feature_policies.keys())}) role = (('network', policy_name),) if not policy.check(role, request): return False # Check if a required extension is enabled feature_extension = feature_info.get('extension') if feature_extension: try: return is_extension_supported(request, feature_extension) except Exception: LOG.info("Failed to check Neutron '%s' extension is not supported", feature_extension) return False # If all checks are passed, now a given feature is allowed. return True class QoSPolicy(NeutronAPIDictWrapper): """Wrapper for neutron QoS Policy.""" def to_dict(self): return self._apidict def policy_create(request, **kwargs): """Create a QoS Policy. :param request: request context :param name: name of the policy :param description: description of policy :param shared: boolean (true or false) :return: QoSPolicy object """ body = {'policy': kwargs} policy = neutronclient(request).create_qos_policy(body=body).get('policy') return QoSPolicy(policy) def policy_list(request, **kwargs): """List of QoS Policies.""" policies = neutronclient(request).list_qos_policies( **kwargs).get('policies') return [QoSPolicy(p) for p in policies] @profiler.trace def policy_get(request, policy_id, **kwargs): """Get QoS policy for a given policy id.""" policy = neutronclient(request).show_qos_policy( policy_id, **kwargs).get('policy') return QoSPolicy(policy) @profiler.trace def list_availability_zones(request, resource=None, state=None): az_list = neutronclient(request).list_availability_zones().get( 'availability_zones') if resource: az_list = [az for az in az_list if az['resource'] == resource] if state: az_list = [az for az in az_list if az['state'] == state] return sorted(az_list, key=lambda zone: zone['name'])