========================== Settings and Configuration ========================== Introduction ============ Horizon's settings tend to fall into three categories: * Horizon configuration options (contained in the ``HORIZON_CONFIG`` dict) which are not OpenStack-specific and pertain only to the core framework. * OpenStack-related settings which pertain to other projects/services and are generally prefixed with ``OPENSTACK_`` in the settings file. * Django settings (including common plugins like ``django-compressor``) which can be (and should be) read about in their respective documentation. What follows is an overview of the Horizon and OpenStack-specific settings and a few notes on the Django-related settings. .. note:: Prior to the Essex release of Horizon there were settings which controlled whether features such as Object Storage/Swift or Networking/Neutron would be enabled in the OpenStack Dashboard. This code has long since been removed and those pre-Essex settings have no impact now. In Essex and later, the Service Catalog returned by the Identity Service after a user has successfully authenticated determines the dashboards and panels that will be available within the OpenStack Dashboard. If you are not seeing a particular service you expected make sure your Service Catalog is configured correctly. Horizon Settings ================ The following options are available in order to configure/customize the behavior of your Horizon installation. All of them are contained in the ``HORIZON_CONFIG`` dictionary. .. _dashboards: ``dashboards`` -------------- .. warning:: In OpenStack Dashboard configuration, we suggest **NOT** to use this setting. Please specify the order of dashboard using the :ref:`pluggable-settings-label`. Both the pluggable dashboard mechanism (OpenStack Dashboard default) and this setting ``dashboard`` configure the order of dashboards and the setting ``dashboard`` precedes the pluggable dashboard mechanism. Specifying the order in two places may cause confusion. Please use this parameter only when the pluggable config is not used. .. versionadded:: 2012.1(Essex) Default: ``None`` Horizon Dashboards are automatically discovered in the following way: * By adding a configuration file to the ``openstack_dashboard/local/enabled`` directory (for more information see :ref:`pluggable-settings-label`). This is the default way in OpenStack Dashboard. * By traversing Django's list of `INSTALLED_APPS `_ and importing any files that have the name ``"dashboard.py"`` and include code to register themselves as a Horizon dashboard. By default, dashboards defined by ``openstack_dashboard/local/enabled`` are displayed first in the alphabetical order of the config files, and then the remaining dashboards discovered by traversing INSTALLED_APPS are displayed in the alphabetical order. If a list of ``dashboard`` slugs is provided in this setting, the supplied ordering is applied to the list of discovered dashboards. If the list of dashboard slugs is shorter than the number of discovered dashboards, the remaining dashboards are appended in the default order described above. The dashboards listed must be in a Python module which is included in the ``INSTALLED_APPS`` list and on the Python path. ``default_dashboard`` --------------------- .. warning:: In OpenStack Dashboard configuration, we suggest **NOT** to use this setting. Please specify the order of dashboard using the :ref:`pluggable-settings-label`. The default dashboard can be configured via both the pluggable dashboard mechanism (OpenStack Dashboard default) and this setting ``default_dashboard``, and if both are specified, the setting by the pluggable dashboard mechanism will be used. Specifying the default dashboard in two places may cause confusion. Please use this parameter only when the pluggable config is not used. .. versionadded:: 2012.1(Essex) Default: ``None`` The slug of the dashboard which should act as the first-run/fallback dashboard whenever a user logs in or is otherwise redirected to an ambiguous location. ``user_home`` ------------- .. versionadded:: 2012.1(Essex) Default: ``settings.LOGIN_REDIRECT_URL`` This can be either a literal URL path (such as the default), or Python's dotted string notation representing a function which will evaluate what URL a user should be redirected to based on the attributes of that user. ``ajax_queue_limit`` -------------------- .. versionadded:: 2012.1(Essex) Default: ``10`` The maximum number of simultaneous AJAX connections the dashboard may try to make. This is particularly relevant when monitoring a large number of instances, volumes, etc. which are all actively trying to update/change state. ``ajax_poll_interval`` ---------------------- .. versionadded:: 2012.1(Essex) Default: ``2500`` How frequently resources in transition states should be polled for updates, expressed in milliseconds. ``auto_fade_alerts`` -------------------- .. versionadded:: 2013.2(Havana) Defaults: ``{'delay': [3000], 'fade_duration': [1500], 'types': []}`` If provided, will auto-fade the alert types specified. Valid alert types include: ['alert-success', 'alert-info', 'alert-warning', 'alert-error'] Can also define the delay before the alert fades and the fade out duration. ``help_url`` ------------ .. versionadded:: 2012.2(Folsom) Default: ``None`` If provided, a "Help" link will be displayed in the site header which links to the value of this settings (ideally a URL containing help information). ``exceptions`` -------------- .. versionadded:: 2012.1(Essex) Default: ``{'unauthorized': [], 'not_found': [], 'recoverable': []}`` A dictionary containing classes of exceptions which Horizon's centralized exception handling should be aware of. Based on these exception categories, Horizon will handle the exception and display a message to the user. ``modal_backdrop`` ------------------ .. versionadded:: 2014.2(Kilo) Default: ``"static"`` Controls how bootstrap backdrop element outside of modals looks and feels. Valid values are ``"true"`` (show backdrop element outside the modal, close the modal after clicking on backdrop), ``"false"`` (do not show backdrop element, do not close the modal after clicking outside of it) and ``"static"`` (show backdrop element outside the modal, do not close the modal after clicking on backdrop). ``disable_password_reveal`` --------------------------- .. versionadded:: 2015.1(Kilo) Default: ``False`` Setting this to True will disable the reveal button for password fields, including on the login form. ``password_validator`` ---------------------- .. versionadded:: 2012.1(Essex) Default: ``{'regex': '.*', 'help_text': _("Password is not accepted")}`` A dictionary containing a regular expression which will be used for password validation and help text which will be displayed if the password does not pass validation. The help text should describe the password requirements if there are any. This setting allows you to set rules for passwords if your organization requires them. ``password_autocomplete`` ------------------------- .. versionadded:: 2013.1(Grizzly) Default: ``"off"`` Controls whether browser autocompletion should be enabled on the login form. Valid values are ``"on"`` and ``"off"``. ``simple_ip_management`` ------------------------ .. versionadded:: 2013.1(Grizzly) Default: ``True`` Enable or disable simplified floating IP address management. "Simple" floating IP address management means that the user does not ever have to select the specific IP addresses they wish to use, and the process of allocating an IP and assigning it to an instance is one-click. The "advanced" floating IP management allows users to select the floating IP pool from which the IP should be allocated and to select a specific IP address when associating one with an instance. .. note:: Currently "simple" floating IP address management is not compatible with Neutron. There are two reasons for this. First, Neutron does not support the default floating IP pool at the moment. Second, a Neutron floating IP can be associated with each VIF and we need to check whether there is only one VIF for an instance to enable simple association support. ``angular_modules`` ------------------------- Default: ``[]`` A list of AngularJS modules to be loaded when Angular bootstraps. These modules are added as dependencies on the root Horizon application ``horizon``. ``js_files`` ------------------------- Default: ``[]`` A list of javascript source files to be included in the compressed set of files that are loaded on every page. This is needed for AngularJS modules that are referenced in ``angular_modules`` and therefore need to be include in every page. ``js_spec_files`` ------------------------- .. versionadded:: 2015.1(Kilo) Default: ``[]`` A list of javascript spec files to include for integration with the Jasmine spec runner. Jasmine is a behavior-driven development framework for testing JavaScript code. OpenStack Settings (Partial) ============================ The following settings inform the OpenStack Dashboard of information about the other OpenStack projects which are part of this cloud and control the behavior of specific dashboards, panels, API calls, etc. Most of the following settings are defined in ``openstack_dashboard/local/local_settings.py``, which should be copied from ``openstack_dashboard/local/local_settings.py.example``. ``AUTHENTICATION_URLS`` ----------------------- .. versionadded:: 2015.1(Kilo) Default: ``['openstack_auth.urls']`` A list of modules from which to collate authentication URLs from. The default option adds URLs from the django-openstack-auth module however others will be required for additional authentication mechanisms. ``API_RESULT_LIMIT`` -------------------- .. versionadded:: 2012.1(Essex) Default: ``1000`` The maximum number of objects (e.g. Swift objects or Glance images) to display on a single page before providing a paging element (a "more" link) to paginate results. ``API_RESULT_PAGE_SIZE`` ------------------------ .. versionadded:: 2012.2(Folsom) Default: ``20`` Similar to ``API_RESULT_LIMIT``. This setting controls the number of items to be shown per page if API pagination support for this exists. ``AVAILABLE_REGIONS`` --------------------- .. versionadded:: 2012.1(Essex) Default: ``None`` A list of tuples which define multiple regions. The tuple format is ``('http://{{ keystone_host }}:5000/v2.0', '{{ region_name }}')``. If any regions are specified the login form will have a dropdown selector for authenticating to the appropriate region, and there will be a region switcher dropdown in the site header when logged in. If you do not have multiple regions you should use the ``OPENSTACK_HOST`` and ``OPENSTACK_KEYSTONE_URL`` settings instead. ``CONSOLE_TYPE`` ---------------- .. versionadded:: 2013.2(Havana) Default: ``"AUTO"`` This setting specifies the type of in-browser console used to access the VMs. Valid values are ``"AUTO"``(default), ``"VNC"``, ``"SPICE"``, ``"RDP"``, ``"SERIAL"``, and ``None``. ``None`` deactivates the in-browser console and is available in version 2014.2(Juno). ``"SERIAL"`` is available since 2015.1(Kilo). ``SWIFT_FILE_TRANSFER_CHUNK_SIZE`` ---------------------------------- .. versionadded:: 2015.1(Kilo) Default: ``512 * 1024`` This setting specifies the size of the chunk (in bytes) for downloading objects from Swift. Do not make it very large (higher than several dozens of Megabytes, exact number depends on your connection speed), otherwise you may encounter socket timeout. The default value is 524288 bytes (or 512 Kilobytes). ``INSTANCE_LOG_LENGTH`` ----------------------- .. versionadded:: 2015.1(Kilo) Default: ``35`` This setting enables you to change the default number of lines displayed for the log of an instance. Valid value must be a positive integer. ``CREATE_INSTANCE_FLAVOR_SORT`` ------------------------------- .. versionadded:: 2013.2(Havana) Default: ``{'key':'ram'}`` When launching a new instance the default flavor is sorted by RAM usage in ascending order. You can customize the sort order by: id, name, ram, disk and vcpus. Additionally, you can insert any custom callback function. You can also provide a flag for reverse sort. See the description in local_settings.py.example for more information. This example sorts flavors by vcpus in descending order:: CREATE_INSTANCE_FLAVOR_SORT = { 'key':'vcpus', 'reverse': True, } ``CUSTOM_THEME_PATH`` --------------------- .. versionadded:: 2015.1(Kilo) Default: ``"themes/default"`` This setting tells Horizon to use a directory as a custom theme. By default, this directory will serve as the static root of the theme and the entire contents of the directory will be served up at ``/static/custom``. If you wish to include content other than static files in a theme directory, but do not wish that content to be served up, then you can create a sub directory named ``static``. If the theme folder contains a sub-directory with the name ``static``, then ``static/custom/static``` will be used as the root for the content served at ``/static/custom``. The static root of the theme folder must always contain a _variables.scss file and a _styles.scss file. These must contain or import all the bootstrap and horizon specific variables and styles which are used to style the GUI. For example themes, see: /horizon/openstack_dashboard/themes/ Horizon ships with one alternate theme based on Google's Material Design. To use the alternate theme, set your CUSTOM_THEME_PATH to ``themes/material``. ``DEFAULT_THEME_PATH`` ---------------------- .. versionadded:: 8.0.0(Liberty) Default: ``"themes/default"`` This setting allows Horizon to collect an additional theme during static collection and be served up via /static/themes/default. This is useful if CUSTOM_THEME_PATH inherits from another theme (like 'default'). If DEFAULT_THEME_PATH is the same as CUSTOM_THEME_PATH, then collection is skipped and /static/themes will not exist. ``DROPDOWN_MAX_ITEMS`` ---------------------- .. versionadded:: 2015.1(Kilo) Default: ``30`` This setting sets the maximum number of items displayed in a dropdown. Dropdowns that limit based on this value need to support a way to observe the entire list. ``ENFORCE_PASSWORD_CHECK`` -------------------------- .. versionadded:: 2015.1(Kilo) Default: ``False`` This setting will display an 'Admin Password' field on the Change Password form to verify that it is indeed the admin logged-in who wants to change the password. ``IMAGES_LIST_FILTER_TENANTS`` ------------------------------ .. versionadded:: 2013.1(Grizzly) Default: ``None`` A list of dictionaries to add optional categories to the image fixed filters in the Images panel, based on project ownership. Each dictionary should contain a `tenant` attribute with the project id, and optionally a `text` attribute specifying the category name, and an `icon` attribute that displays an icon in the filter button. The icon names are based on the default icon theme provided by Bootstrap. Example: ``[{'text': 'Official', 'tenant': '27d0058849da47c896d205e2fc25a5e8', 'icon': 'icon-ok'}]`` .. note:: Since the Kilo release, the Bootstrap icon library (e.g. 'icon-ok') has been replaced with Font Awesome (e.g. 'fa-check'). ``IMAGE_RESERVED_CUSTOM_PROPERTIES`` ------------------------------------ .. versionadded:: 2014.2(Juno) Default: ``[]`` A list of image custom property keys that should not be displayed in the Update Metadata tree. This setting can be used in the case where a separate panel is used for managing a custom property or if a certain custom property should never be edited. ``OPENSTACK_API_VERSIONS`` -------------------------- .. versionadded:: 2013.2(Havana) Default:: { "data-processing": 1.1, "identity": 2.0, "volume": 2 } Overrides for OpenStack API versions. Use this setting to force the OpenStack dashboard to use a specific API version for a given service API. .. note:: The version should be formatted as it appears in the URL for the service API. For example, the identity service APIs have inconsistent use of the decimal point, so valid options would be "2.0" or "3". For example:: OPENSTACK_API_VERSIONS = { "data-processing": 1.1, "identity": 3, "volume": 2 } ``OPENSTACK_ENABLE_PASSWORD_RETRIEVE`` -------------------------------------- .. versionadded:: 2014.1(Icehouse) Default: ``"False"`` When set, enables the instance action "Retrieve password" allowing password retrieval from metadata service. ``OPENSTACK_ENDPOINT_TYPE`` --------------------------- .. versionadded:: 2012.1(Essex) Default: ``"publicURL"`` A string which specifies the endpoint type to use for the endpoints in the Keystone service catalog. The default value for all services except for identity is ``"publicURL"`` . The default value for the identity service is ``"internalURL"``. ``OPENSTACK_HOST`` ------------------ .. versionadded:: 2012.1(Essex) Default: ``"127.0.0.1"`` The hostname of the Keystone server used for authentication if you only have one region. This is often the *only* setting that needs to be set for a basic deployment. .. _hypervisor-settings-label: ``OPENSTACK_HYPERVISOR_FEATURES`` --------------------------------- .. versionadded:: 2012.2(Folsom) Default:: { 'can_set_mount_point': False, 'can_set_password': False, 'requires_keypair': False, } A dictionary containing settings which can be used to identify the capabilities of the hypervisor for Nova. The Xen Hypervisor has the ability to set the mount point for volumes attached to instances (other Hypervisors currently do not). Setting ``can_set_mount_point`` to ``True`` will add the option to set the mount point from the UI. Setting ``can_set_password`` to ``True`` will enable the option to set an administrator password when launching or rebuilding an instance. Setting ``requires_keypair`` to ``True`` will require users to select a key pair when launching an instance. ``OPENSTACK_IMAGE_BACKEND`` --------------------------- .. versionadded:: 2013.2(Havana) Default:: { 'image_formats': [ ('', _('Select format')), ('aki', _('AKI - Amazon Kernel Image')), ('ami', _('AMI - Amazon Machine Image')), ('ari', _('ARI - Amazon Ramdisk Image')), ('docker', _('Docker')), ('iso', _('ISO - Optical Disk Image')), ('qcow2', _('QCOW2 - QEMU Emulator')), ('raw', _('Raw')), ('vdi', _('VDI')), ('vhd', _('VHD')), ('vmdk', _('VMDK')) ] } Used to customize features related to the image service, such as the list of supported image formats. ``IMAGE_CUSTOM_PROPERTY_TITLES`` -------------------------------- .. versionadded:: 2014.1(Icehouse) Default:: { "architecture": _("Architecture"), "kernel_id": _("Kernel ID"), "ramdisk_id": _("Ramdisk ID"), "image_state": _("Euca2ools state"), "project_id": _("Project ID"), "image_type": _("Image Type") } Used to customize the titles for image custom property attributes that appear on image detail pages. ``HORIZON_IMAGES_ALLOW_UPLOAD`` -------------------------------- .. versionadded:: 2013.1(Grizzly) Default: ``True`` If set to ``False``, this setting disables *local* uploads to prevent filling up the disk on the dashboard server since uploads to the Glance image store service tend to be particularly large - in the order of hundreds of megabytes to multiple gigabytes. .. note:: This will not disable image creation altogether, as this setting does not affect images created by specifying an image location (URL) as the image source. ``OPENSTACK_KEYSTONE_BACKEND`` ------------------------------ .. versionadded:: 2012.1(Essex) Default: ``{'name': 'native', 'can_edit_user': True, 'can_edit_project': True}`` A dictionary containing settings which can be used to identify the capabilities of the auth backend for Keystone. If Keystone has been configured to use LDAP as the auth backend then set ``can_edit_user`` and ``can_edit_project`` to ``False`` and name to ``"ldap"``. ``OPENSTACK_KEYSTONE_DEFAULT_DOMAIN`` ------------------------------------- .. versionadded:: 2013.2(Havana) Default: ``"Default"`` Overrides the default domain used when running on single-domain model with Keystone V3. All entities will be created in the default domain. ``OPENSTACK_KEYSTONE_DEFAULT_ROLE`` ----------------------------------- .. versionadded:: 2011.3(Diablo) Default: ``"_member_"`` The name of the role which will be assigned to a user when added to a project. This value must correspond to an existing role name in Keystone. In general, the value should match the ``member_role_name`` defined in ``keystone.conf``. ``OPENSTACK_KEYSTONE_ADMIN_ROLES`` ---------------------------------- .. versionadded:: 2015.1(Kilo) Default: ``["admin"]`` The list of roles that have administrator privileges in this OpenStack installation. This check is very basic and essentially only works with keystone v2.0 and v3 with the default policy file. The setting assumes there is a common ``admin`` like role(s) across services. Example uses of this setting are: * to rename the ``admin`` role to ``cloud-admin`` * allowing multiple roles to have administrative privileges, like ``["admin", "cloud-admin", "net-op"]`` ``OPENSTACK_KEYSTONE_MULTIDOMAIN_SUPPORT`` ------------------------------------------ .. versionadded:: 2013.2(Havana) Default: ``False`` Set this to True if running on multi-domain model. When this is enabled, it will require user to enter the Domain name in addition to username for login. ``OPENSTACK_KEYSTONE_URL`` -------------------------- .. versionadded:: 2011.3(Diablo) Default: ``"http://%s:5000/v2.0" % OPENSTACK_HOST`` The full URL for the Keystone endpoint used for authentication. Unless you are using HTTPS, running your Keystone server on a nonstandard port, or using a nonstandard URL scheme you shouldn't need to touch this setting. ``WEBSSO_ENABLED`` ------------------ .. versionadded:: 2015.1(Kilo) Default: ``False`` Enables keystone web single-sign-on if set to True. For this feature to work, make sure that you are using Keystone V3 and Django OpenStack Auth V1.2.0 or later. ``WEBSSO_INITIAL_CHOICE`` ------------------------- .. versionadded:: 2015.1(Kilo) Default: ``"credentials"`` Determines the default authentication mechanism. When user lands on the login page, this is the first choice they will see. ``WEBSSO_CHOICES`` ------------------ .. versionadded:: 2015.1(Kilo) Default:: ( ("credentials", _("Keystone Credentials")), ("oidc", _("OpenID Connect")), ("saml2", _("Security Assertion Markup Language")) ) This is the list of authentication mechanisms available to the user. It includes Keystone federation protocols such as OpenID Connect and SAML. The list of choices is completely configurable, so as long as the id remains intact. Do not remove the credentials mechanism unless you are sure. Once removed, even admins will have no way to log into the system via the dashboard. ``OPENSTACK_CINDER_FEATURES`` ----------------------------- .. versionadded:: 2014.2(Juno) Default: ``{'enable_backup': False}`` A dictionary of settings which can be used to enable optional services provided by cinder. Currently only the backup service is available. ``OPENSTACK_NEUTRON_NETWORK`` ----------------------------- .. versionadded:: 2013.1(Grizzly) Default:: { 'enable_router': True, 'enable_distributed_router': False, 'enable_ha_router': False, 'enable_lb': True, 'enable_quotas': False, 'enable_firewall': True, 'enable_vpn': True, 'profile_support': None, 'supported_provider_types': ["*"], 'supported_vnic_types': ["*"], 'segmentation_id_range': {}, 'enable_fip_topology_check': True, 'default_ipv4_subnet_pool_label': None, 'default_ipv6_subnet_pool_label': None, } A dictionary of settings which can be used to enable optional services provided by Neutron and configure Neutron specific features. The following options are available. ``enable_router``: .. versionadded:: 2014.2(Juno) Default: ``True`` Enable (True) or disable (False) the panels and menus related to router and Floating IP features. This option only affects when Neutron is enabled. If your Neutron deployment has no support for Layer-3 features, or you do not wish to provide the Layer-3 features through the Dashboard, this should be set to ``False``. ``enable_distributed_router``: .. versionadded:: 2014.2(Juno) Default: ``False`` Enable or disable Neutron distributed virtual router (DVR) feature in the Router panel. For the DVR feature to be enabled, this option needs to be set to True and your Neutron deployment must support DVR. Even when your Neutron plugin (like ML2 plugin) supports DVR feature, DVR feature depends on l3-agent configuration, so deployers should set this option appropriately depending on your deployment. ``enable_ha_router``: .. versionadded:: 2014.2(Juno) Default: ``False`` Enable or disable HA (High Availability) mode in Neutron virtual router in the Router panel. For the HA router mode to be enabled, this option needs to be set to True and your Neutron deployment must support HA router mode. Even when your Neutron plugin (like ML2 plugin) supports HA router mode, the feature depends on l3-agent configuration, so deployers should set this option appropriately depending on your deployment. ``enable_lb``: .. versionadded:: 2013.1(Grizzly) (Deprecated) Default: ``True`` Enables the load balancer panel. The load balancer panel will be enabled when this option is True and your Neutron deployment supports LBaaS. If you want to disable load balancer panel even when your Neutron supports LBaaS, set it to False. This option is now marked as "deprecated" and will be removed in Kilo or later release. The load balancer panel is now enabled only when LBaaS feature is available in Neutron and this option is no longer needed. We suggest not to use this option to disable the load balancer panel from now on. ``enable_quotas``: Default: ``False`` Enable support for Neutron quotas feature. To make this feature work appropriately, you need to use Neutron plugins with quotas extension support and quota_driver should be DbQuotaDriver (default config). ``enable_firewall``: (Deprecated) Default: ``True`` Enables the firewall panel. firewall panel will be enabled when this option is True and your Neutron deployment supports FWaaS. If you want to disable firewall panel even when your Neutron supports FWaaS, set it to False. This option is now marked as "deprecated" and will be removed in Kilo or later release. The firewall panel is now enabled only when FWaaS feature is available in Neutron and this option is no longer needed. We suggest not to use this option to disable the firewall panel from now on. ``enable_vpn``: (Deprecated) Default: ``True`` Enables the VPN panel. VPN panel will be enabled when this option is True and your Neutron deployment supports VPNaaS. If you want to disable VPN panel even when your Neutron supports VPNaaS, set it to False. This option is now marked as "deprecated" and will be removed in Kilo or later release. The VPN panel is now enabled only when VPNaaS feature is available in Neutron and this option is no longer needed. We suggest not to use this option to disable the VPN panel from now on. ``profile_support``: Default: ``None`` This option specifies a type of network port profile support. Currently the available value is either ``None`` or ``"cisco"``. ``None`` means to disable port profile support. ``cisco`` can be used with Neutron Cisco plugins. ``supported_provider_types``: .. versionadded:: 2014.2(Juno) Default: ``["*"]`` For use with the provider network extension. Use this to explicitly set which provider network types are supported. Only the network types in this list will be available to choose from when creating a network. Network types include local, flat, vlan, gre, and vxlan. By default all provider network types will be available to choose from. Example: ``['local', 'flat', 'gre']`` ``supported_vnic_types``: .. versionadded:: 2015.1(Kilo) Default ``['*']`` For use with the port binding extension. Use this to explicitly set which VNIC types are supported; only those listed will be shown when creating or editing a port. VNIC types include normal, direct and macvtap. By default all VNIC types will be available to choose from. Example ``['normal', 'direct']`` To disable VNIC type selection, set an empty list or None. ``segmentation_id_range``: .. versionadded:: 2014.2(Juno) Default: ``{}`` For use with the provider network extension. This is a dictionary where each key is a provider network type and each value is a list containing two numbers. The first number is the minimum segmentation ID that is valid. The second number is the maximum segmentation ID. Pertains only to the vlan, gre, and vxlan network types. By default this option is not provided and each minimum and maximum value will be the default for the provider network type. Example: ``{'vlan': [1024, 2048], 'gre': [4094, 65536]}`` ``enable_fip_topology_check``: Default: ``True`` The Default Neutron implementation needs a router with a gateway to associate a FIP. So by default a topology check will be performed by horizon to list only VM ports attached to a network which is itself attached to a router with an external gateway. This is to prevent from setting a FIP to a port which will fail with an error. Some Neutron vendors do not require it. Some can even attach a FIP to any port (e.g.: OpenContrail) owned by a tenant. Set to False if you want to be able to associate a FIP to an instance on a subnet with no router if your Neutron backend allows it. .. versionadded:: 8.0.0(Liberty) ``default_ipv4_subnet_pool_label``: .. versionadded:: 8.0.0(Liberty) Default: ``None`` (Disabled) Neutron can be configured with a default Subnet Pool to be used for IPv4 subnet-allocation. Specify the label you wish to display in the Address pool selector on the create subnet step if you want to use this feature. ``default_ipv6_subnet_pool_label``: .. versionadded:: 8.0.0(Liberty) Default: ``None`` (Disabled) Neutron can be configured with a default Subnet Pool to be used for IPv6 subnet-allocation. Specify the label you wish to display in the Address pool selector on the create subnet step if you want to use this feature. You must set this to enable IPv6 Prefix Delegation in a PD-capable environment. ``OPENSTACK_SSL_CACERT`` ------------------------ .. versionadded:: 2013.2(Havana) Default: ``None`` When unset or set to ``None`` the default CA certificate on the system is used for SSL verification. When set with the path to a custom CA certificate file, this overrides use of the default system CA certificate. This custom certificate is used to verify all connections to openstack services when making API calls. ``OPENSTACK_SSL_NO_VERIFY`` --------------------------- .. versionadded:: 2012.2(Folsom) Default: ``False`` Disable SSL certificate checks in the OpenStack clients (useful for self-signed certificates). ``OPENSTACK_TOKEN_HASH_ALGORITHM`` ---------------------------------- .. versionadded:: 2014.2(Juno) Default: ``"md5"`` The hash algorithm to use for authentication tokens. This must match the hash algorithm that the identity (Keystone) server and the auth_token middleware are using. Allowed values are the algorithms supported by Python's hashlib library. ``OPENSTACK_TOKEN_HASH_ENABLED`` -------------------------------- .. versionadded:: 8.0.0(Liberty) Default: ``True`` Hashing tokens from Keystone keeps the Horizon session data smaller, but it doesn't work in some cases when using PKI tokens. Uncomment this value and set it to False if using PKI tokens and there are 401 errors due to token hashing. ``POLICY_FILES`` ---------------- .. versionadded:: 2013.2(Havana) Default: ``{'identity': 'keystone_policy.json', 'compute': 'nova_policy.json'}`` This should essentially be the mapping of the contents of ``POLICY_FILES_PATH`` to service types. When policy.json files are added to ``POLICY_FILES_PATH``, they should be included here too. ``POLICY_FILES_PATH`` --------------------- .. versionadded:: 2013.2(Havana) Default: ``os.path.join(ROOT_PATH, "conf")`` Specifies where service based policy files are located. These are used to define the policy rules actions are verified against. ``SESSION_TIMEOUT`` ------------------- .. versionadded:: 2013.2(Havana) Default: ``"1800"`` Specifies the timespan in seconds inactivity, until a user is considered as logged out. ``SAHARA_AUTO_IP_ALLOCATION_ENABLED`` ------------------------------------- Default: ``False`` This setting notifies the Data Processing (Sahara) system whether or not automatic IP allocation is enabled. You would want to set this to True if you were running Nova Networking with auto_assign_floating_ip = True. ``TROVE_ADD_USER_PERMS`` and ``TROVE_ADD_DATABASE_PERMS`` --------------------------------------------------------- .. versionadded:: 2013.2(Havana) Default: ``[]`` Trove user and database extension support. By default, support for creating users and databases on database instances is turned on. To disable these extensions set the permission to something unusable such as ``[!]``. ``WEBROOT`` ----------- .. versionadded:: 2015.1(Kilo) Default: ``"/"`` Specifies the location where the access to the dashboard is configured in the web server. For example, if you're accessing the Dashboard via https:///dashboard, you would set this to ``"/dashboard/"``. .. note:: Additional settings may be required in the config files of your webserver of choice. For example to make ``"/dashboard/"`` the web root in Apache, the ``"sites-available/horizon.conf"`` requires a couple of additional aliases set:: Alias /dashboard/static %HORIZON_DIR%/static Alias /dashboard/media %HORIZON_DIR%/openstack_dashboard/static Apache also requires changing your WSGIScriptAlias to reflect the desired path. For example, you'd replace ``/`` with ``/dashboard`` for the alias. ``STATIC_ROOT`` --------------- .. versionadded:: 8.0.0(Liberty) Default: ``/static`` The absolute path to the directory where static files are collected when collectstatic is run. For more information see: https://docs.djangoproject.com/en/1.7/ref/settings/#static-root ``STATIC_URL`` -------------- .. versionadded:: 8.0.0(Liberty) Default: ``/static/`` URL that refers to files in STATIC_ROOT. By default this value is ``WEBROOT/static/``. This value can be changed from the default. When changed, the alias in your webserver configuration should be updated to match. .. note:: The value for STATIC_URL must end in '/'. This value is also available in the scss namespace with the variable name $static_url. Make sure you run ``python manage.py collectstatic`` and ``python manage.py compress`` after any changes to this value in settings.py. For your convenience, a custom theme for only setting the static url has been provided see: ``"/horizon/openstack_dashboard/themes/webroot"`` For more information see: https://docs.djangoproject.com/en/1.7/ref/settings/#static-url ``DISALLOW_IFRAME_EMBED`` ------------------------- .. versionadded:: 8.0.0(Liberty) Default: ``True`` This setting can be used to defend against Clickjacking and prevent Horizon from being embedded within an iframe. Legacy browsers are still vulnerable to a Cross-Frame Scripting (XFS) vulnerability, so this option allows extra security hardening where iframes are not used in deployment. When set to true, a ``"frame-buster"`` script is inserted into the template header that prevents the web page from being framed and therefore defends against clickjacking. For more information see: http://tinyurl.com/anticlickjack .. note:: If your deployment requires the use of iframes, you can set this setting to ``False`` to exclude the frame-busting code and allow iframe embedding. ``OPENSTACK_NOVA_EXTENSIONS_BLACKLIST`` --------------------------------------- .. versionadded:: 8.0.0(Liberty) Default: ``[]`` Ignore all listed Nova extensions, and behave as if they were unsupported. Can be used to selectively disable certain costly extensions for performance reasons. Django Settings (Partial) ========================= .. warning:: This is not meant to be anywhere near a complete list of settings for Django. You should always consult the upstream documentation, especially with regards to deployment considerations and security best-practices. There are a few key settings you should be aware of for development and the most basic of deployments. Further recommendations can be found in the Deploying Horizon section of this documentation. ``ALLOWED_HOSTS`` ----------------- .. versionadded:: 2013.2(Havana) Default: ``['localhost']`` This list should contain names (or IP addresses) of the host running the dashboard; if it's being accessed via name, the DNS name (and probably short-name) should be added, if it's accessed via IP address, that should be added. The setting may contain more than one entry. .. note:: ALLOWED_HOSTS is required. If Horizon is running in production (DEBUG is False), set this with the list of host/domain names that the application can serve. For more information see: https://docs.djangoproject.com/en/dev/ref/settings/#allowed-hosts ``DEBUG`` and ``TEMPLATE_DEBUG`` -------------------------------- .. versionadded:: 2011.2(Cactus) Default: ``True`` Controls whether unhandled exceptions should generate a generic 500 response or present the user with a pretty-formatted debug information page. This setting should **always** be set to ``False`` for production deployments as the debug page can display sensitive information to users and attackers alike. ``SECRET_KEY`` -------------- .. versionadded:: 2012.1(Essex) This should absolutely be set to a unique (and secret) value for your deployment. Unless you are running a load-balancer with multiple Horizon installations behind it, each Horizon instance should have a unique secret key. .. note:: Setting a custom secret key: You can either set it to a specific value or you can let Horizon generate a default secret key that is unique on this machine, regardless of the amount of Python WSGI workers (if used behind Apache+mod_wsgi). However, there may be situations where you would want to set this explicitly, e.g. when multiple dashboard instances are distributed on different machines (usually behind a load-balancer). Either you have to make sure that a session gets all requests routed to the same dashboard instance or you set the same SECRET_KEY for all of them. From horizon.utils import secret_key:: SECRET_KEY = secret_key.generate_or_read_from_file( os.path.join(LOCAL_PATH, '.secret_key_store')) The ``local_settings.py.example`` file includes a quick-and-easy way to generate a secret key for a single installation. ``SECURE_PROXY_SSL_HEADER``, ``CSRF_COOKIE_SECURE`` and ``SESSION_COOKIE_SECURE`` --------------------------------------------------------------------------------- .. versionadded:: 2013.1(Grizzly) These three settings should be configured if you are deploying Horizon with SSL. The values indicated in the default ``local_settings.py.example`` file are generally safe to use. When CSRF_COOKIE_SECURE or SESSION_COOKIE_SECURE are set to True, these attributes help protect the session cookies from cross-site scripting. ``ADD_INSTALLED_APPS`` ---------------------- .. versionadded:: 2015.1(Kilo) A list of Django applications to be prepended to the ``INSTALLED_APPS`` setting. Allows extending the list of installed applications without having to override it completely. .. _pluggable-settings-label: Pluggable Settings ================================= Horizon allows dashboards, panels and panel groups to be added without modifying the default settings. Pluggable settings are a mechanism to allow settings to be stored in separate files. Those files are read at startup and used to modify the default settings. The default location for the dashboard configuration files is ``openstack_dashboard/enabled``, with another directory, ``openstack_dashboard/local/enabled`` for local overrides. Both sets of files will be loaded, but the settings in ``openstack_dashboard/local/enabled`` will overwrite the default ones. The settings are applied in alphabetical order of the filenames. If the same dashboard has configuration files in ``enabled`` and ``local/enabled``, the local name will be used. Note, that since names of python modules can't start with a digit, the files are usually named with a leading underscore and a number, so that you can control their order easily. Before we describe the specific use cases, the following keys can be used in any pluggable settings file: ``ADD_EXCEPTIONS`` ------------------ .. versionadded:: 2014.1(Icehouse) A dictionary of exception classes to be added to ``HORIZON['exceptions']``. ``ADD_INSTALLED_APPS`` ---------------------- .. versionadded:: 2014.1(Icehouse) A list of applications to be prepended to ``INSTALLED_APPS``. This is needed to expose static files from a plugin. ``ADD_ANGULAR_MODULES`` ----------------------- .. versionadded:: 2014.2(Juno) A list of AngularJS modules to be loaded when Angular bootstraps. These modules are added as dependencies on the root Horizon application ``horizon``. ``ADD_JS_FILES`` ---------------------- .. versionadded:: 2014.2(Juno) A list of javascript source files to be included in the compressed set of files that are loaded on every page. This is needed for AngularJS modules that are referenced in ``ADD_ANGULAR_MODULES`` and therefore need to be included in every page. ``ADD_JS_SPEC_FILES`` ---------------------- .. versionadded:: 2015.1(Kilo) A list of javascript spec files to include for integration with the Jasmine spec runner. Jasmine is a behavior-driven development framework for testing JavaScript code. ``ADD_SCSS_FILES`` ---------------------- .. versionadded:: 8.0.0(Liberty) A list of scss files to be included in the compressed set of files that are loaded on every page. We recommend one scss file per dashboard, use @import if you need to include additional scss files for panels. .. _auto_discover_static_files: ``AUTO_DISCOVER_STATIC_FILES`` ------------------------------ .. versionadded:: 8.0.0(Liberty) If set to ``True``, JavaScript files and static angular html template files will be automatically discovered from the `static` folder in each apps listed in ADD_INSTALLED_APPS. JavaScript source files will be ordered based on naming convention: files with extension `.module.js` listed first, followed by other JavaScript source files. JavaScript files for testing will also be ordered based on naming convention: files with extension `.mock.js` listed first, followed by files with extension `.spec.js`. If ADD_JS_FILES and/or ADD_JS_SPEC_FILES are also specified, files manually listed there will be appended to the auto-discovered files. ``DISABLED`` ------------ .. versionadded:: 2014.1(Icehouse) If set to ``True``, this settings file will not be added to the settings. ``UPDATE_HORIZON_CONFIG`` ------------------------- .. versionadded:: 2014.2(Juno) A dictionary of values that will replace the values in ``HORIZON_CONFIG``. Pluggable Settings for Dashboards ================================= .. versionadded:: 2014.1(Icehouse) The following keys are specific to registering a dashboard: ``DASHBOARD`` ------------- .. versionadded:: 2014.1(Icehouse) The slug of the dashboard to be added to ``HORIZON['dashboards']``. Required. ``DEFAULT`` ----------- .. versionadded:: 2014.1(Icehouse) If set to ``True``, this dashboard will be set as the default dashboard. Examples -------- To disable a dashboard locally, create a file ``openstack_dashboard/local/enabled/_40_dashboard-name.py`` with the following content:: DASHBOARD = '' DISABLED = True To add a Tuskar-UI (Infrastructure) dashboard, you have to install it, and then create a file ``openstack_dashboard/local/enabled/_50_tuskar.py`` with:: from tuskar_ui import exceptions DASHBOARD = 'infrastructure' ADD_INSTALLED_APPS = [ 'tuskar_ui.infrastructure', ] ADD_EXCEPTIONS = { 'recoverable': exceptions.RECOVERABLE, 'not_found': exceptions.NOT_FOUND, 'unauthorized': exceptions.UNAUTHORIZED, } Pluggable Settings for Panels ============================= .. versionadded:: 2014.1(Icehouse) The following keys are specific to registering or removing a panel: ``PANEL`` --------- .. versionadded:: 2014.1(Icehouse) The slug of the panel to be added to ``HORIZON_CONFIG``. Required. ``PANEL_DASHBOARD`` ------------------- .. versionadded:: 2014.1(Icehouse) The slug of the dashboard the ``PANEL`` associated with. Required. ``PANEL_GROUP`` --------------- .. versionadded:: 2014.1(Icehouse) The slug of the panel group the ``PANEL`` is associated with. If you want the panel to show up without a panel group, use the panel group "default". ``DEFAULT_PANEL`` ----------------- .. versionadded:: 2014.1(Icehouse) If set, it will update the default panel of the ``PANEL_DASHBOARD``. ``ADD_PANEL`` ------------- .. versionadded:: 2014.1(Icehouse) Python panel class of the ``PANEL`` to be added. ``REMOVE_PANEL`` ---------------- .. versionadded:: 2014.1(Icehouse) If set to ``True``, the PANEL will be removed from PANEL_DASHBOARD/PANEL_GROUP. Examples -------- To add a new panel to the Admin panel group in Admin dashboard, create a file ``openstack_dashboard/local/enabled/_60_admin_add_panel.py`` with the following content:: PANEL = 'plugin_panel' PANEL_DASHBOARD = 'admin' PANEL_GROUP = 'admin' ADD_PANEL = 'test_panels.plugin_panel.panel.PluginPanel' To remove Info panel from Admin panel group in Admin dashboard locally, create a file ``openstack_dashboard/local/enabled/_70_admin_remove_panel.py`` with the following content:: PANEL = 'info' PANEL_DASHBOARD = 'admin' PANEL_GROUP = 'admin' REMOVE_PANEL = True To change the default panel of Admin dashboard to Instances panel, create a file ``openstack_dashboard/local/enabled/_80_admin_default_panel.py`` with the following content:: PANEL = 'instances' PANEL_DASHBOARD = 'admin' PANEL_GROUP = 'admin' DEFAULT_PANEL = 'instances' Pluggable Settings for Panel Groups =================================== .. versionadded:: 2014.1(Icehouse) The following keys are specific to registering a panel group: ``PANEL_GROUP`` --------------- .. versionadded:: 2014.1(Icehouse) The slug of the panel group to be added to ``HORIZON_CONFIG``. Required. ``PANEL_GROUP_NAME`` -------------------- .. versionadded:: 2014.1(Icehouse) The display name of the PANEL_GROUP. Required. ``PANEL_GROUP_DASHBOARD`` ------------------------- .. versionadded:: 2014.1(Icehouse) The slug of the dashboard the ``PANEL_GROUP`` associated with. Required. Examples -------- To add a new panel group to the Admin dashboard, create a file ``openstack_dashboard/local/enabled/_90_admin_add_panel_group.py`` with the following content:: PANEL_GROUP = 'plugin_panel_group' PANEL_GROUP_NAME = 'Plugin Panel Group' PANEL_GROUP_DASHBOARD = 'admin'