#!/bin/bash
# Interface where external network is attached to overcloud controller(s).
# This interface will be used by the controller(s) for floating IPs.
export NeutronPublicInterface=nic1

# OVERCLOUD_LIBVIRT_TYPE may be either kvm or qemu (if using nested virt).
export OVERCLOUD_LIBVIRT_TYPE=kvm

# Network CIDR to use when creating "default-net" tenant network. This
# will be used for the VM instances. This network should not overlap
# with any other subnets used on the network.
export NETWORK_CIDR="10.0.0.0/24"

# Range of IP addresses to add to Neutron floating ip pool. These should
# be on the same network where NeutronPublicInterface is attached. This
# range of IP addresses should not overlap with any addresses that are in
# use or may be assigned by DHCP. 
export FLOATING_IP_START="172.17.0.45"
export FLOATING_IP_END="172.17.0.64"

# Network subnet for external network. This is the subnet that will be
# used for floating IPs. In the form 172.17.0.0/24
export FLOATING_IP_CIDR="172.17.0.0/24"

# Network gateway on external network. This is the address of the gateway
# that provides external access on the external network.
export BM_NETWORK_GATEWAY="172.17.0.1"

# Network type may be gre or vxlan.
export NEUTRON_NETWORK_TYPE=gre

# Should match the NEURTRON_NETWORK_TYPE above.
export NEUTRON_TUNNEL_TYPES=gre

# Set the number of nodes to provision for each class of server.
export COMPUTESCALE=1
export BLOCKSTORAGESCALE=0
export SWIFTSTORAGESCALE=0