instack-undercloud/undercloud.conf.sample

393 lines
14 KiB
Plaintext

[DEFAULT]
#
# From instack-undercloud
#
# Fully qualified hostname (including domain) to set on the
# Undercloud. If left unset, the current hostname will be used, but
# the user is responsible for configuring all system hostname settings
# appropriately. If set, the undercloud install will configure all
# system hostname settings. (string value)
#undercloud_hostname = <None>
# IP information for the interface on the Undercloud that will be
# handling the PXE boots and DHCP for Overcloud instances. The IP
# portion of the value will be assigned to the network interface
# defined by local_interface, with the netmask defined by the prefix
# portion of the value. (string value)
#local_ip = 192.168.24.1/24
# Virtual IP or DNS address to use for the public endpoints of
# Undercloud services. Only used with SSL. (string value)
# Deprecated group/name - [DEFAULT]/undercloud_public_vip
#undercloud_public_host = 192.168.24.2
# Virtual IP or DNS address to use for the admin endpoints of
# Undercloud services. Only used with SSL. (string value)
# Deprecated group/name - [DEFAULT]/undercloud_admin_vip
#undercloud_admin_host = 192.168.24.3
# DNS nameserver(s) to use for the undercloud node. (list value)
#undercloud_nameservers =
# List of ntp servers to use. (list value)
#undercloud_ntp_servers =
# DNS domain name to use when deploying the overcloud. The overcloud
# parameter "CloudDomain" must be set to a matching value. (string
# value)
#overcloud_domain_name = localdomain
# List of routed network subnets for provisioning and introspection.
# Comma separated list of names/tags. For each network a section/group
# needs to be added to the configuration file with these parameters
# set: cidr, dhcp_start, dhcp_end, inspection_iprange, gateway and
# masquerade_network.
#
# Example:
#
# subnets = subnet1,subnet2
#
# An example section/group in config file:
#
# [subnet1]
# cidr = 192.168.10.0/24
# dhcp_start = 192.168.10.100
# dhcp_end = 192.168.10.200
# inspection_iprange = 192.168.10.20,192.168.10.90
# gateway = 192.168.10.254
# masquerade_network = True
# [subnet2]
# . . .
# (list value)
#subnets = ctlplane-subnet
# Name of the local subnet, where the PXE boot and DHCP interfaces for
# overcloud instances is located. The IP address of the
# local_ip/local_interface should reside in this subnet. (string
# value)
#local_subnet = ctlplane-subnet
# Certificate file to use for OpenStack service SSL connections.
# Setting this enables SSL for the OpenStack API endpoints, leaving it
# unset disables SSL. (string value)
#undercloud_service_certificate =
# When set to True, an SSL certificate will be generated as part of
# the undercloud install and this certificate will be used in place of
# the value for undercloud_service_certificate. The resulting
# certificate will be written to
# /etc/pki/tls/certs/undercloud-[undercloud_public_host].pem. This
# certificate is signed by CA selected by the
# "certificate_generation_ca" option. (boolean value)
#generate_service_certificate = true
# The certmonger nickname of the CA from which the certificate will be
# requested. This is used only if the generate_service_certificate
# option is set. Note that if the "local" CA is selected the
# certmonger's local CA certificate will be extracted to /etc/pki/ca-
# trust/source/anchors/cm-local-ca.pem and subsequently added to the
# trust chain. (string value)
#certificate_generation_ca = local
# The kerberos principal for the service that will use the
# certificate. This is only needed if your CA requires a kerberos
# principal. e.g. with FreeIPA. (string value)
#service_principal =
# Network interface on the Undercloud that will be handling the PXE
# boots and DHCP for Overcloud instances. (string value)
#local_interface = eth1
# MTU to use for the local_interface. (integer value)
#local_mtu = 1500
# DEPRECATED: Network that will be masqueraded for external access, if
# required. This should be the subnet used for PXE booting. (string
# value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: With support for routed networks, masquerading of the
# provisioning networks is moved to a boolean option for each subnet.
#masquerade_network = 192.168.24.0/24
# Path to hieradata override file. If set, the file will be copied
# under /etc/puppet/hieradata and set as the first file in the hiera
# hierarchy. This can be used to custom configure services beyond what
# undercloud.conf provides (string value)
#hieradata_override =
# Path to network config override template. If set, this template will
# be used to configure the networking via os-net-config. Must be in
# json format. Templated tags can be used within the template, see
# instack-undercloud/elements/undercloud-stack-config/net-
# config.json.template for example tags (string value)
#net_config_override =
# Network interface on which inspection dnsmasq will listen. If in
# doubt, use the default value. (string value)
# Deprecated group/name - [DEFAULT]/discovery_interface
#inspection_interface = br-ctlplane
# Whether to enable extra hardware collection during the inspection
# process. Requires python-hardware or python-hardware-detect package
# on the introspection image. (boolean value)
#inspection_extras = true
# Whether to run benchmarks when inspecting nodes. Requires
# inspection_extras set to True. (boolean value)
# Deprecated group/name - [DEFAULT]/discovery_runbench
#inspection_runbench = false
# Makes ironic-inspector enroll any unknown node that PXE-boots
# introspection ramdisk in Ironic. By default, the "fake" driver is
# used for new nodes (it is automatically enabled when this option is
# set to True). Set discovery_default_driver to override.
# Introspection rules can also be used to specify driver information
# for newly enrolled nodes. (boolean value)
#enable_node_discovery = false
# The default driver or hardware type to use for newly discovered
# nodes (requires enable_node_discovery set to True). It is
# automatically added to enabled_drivers or enabled_hardware_types
# accordingly. (string value)
#discovery_default_driver = ipmi
# Whether to enable the debug log level for Undercloud OpenStack
# services. (boolean value)
#undercloud_debug = true
# Whether to update packages during the Undercloud install. (boolean
# value)
#undercloud_update_packages = true
# Whether to install Tempest in the Undercloud. (boolean value)
#enable_tempest = true
# Whether to install Telemetry services (ceilometer, gnocchi, aodh,
# panko ) in the Undercloud. (boolean value)
#enable_telemetry = false
# Whether to install the TripleO UI. (boolean value)
#enable_ui = true
# Whether to install requirements to run the TripleO validations.
# (boolean value)
#enable_validations = true
# Whether to install the Volume service. It is not currently used in
# the undercloud. (boolean value)
#enable_cinder = false
# Whether to install novajoin metadata service in the Undercloud.
# (boolean value)
#enable_novajoin = false
# Whether to enable docker container images to be build on the
# undercloud. (boolean value)
#enable_container_images_build = true
# One Time Password to register Undercloud node with an IPA server.
# Required when enable_novajoin = True. (string value)
#ipa_otp =
# Whether to use iPXE for deploy and inspection. (boolean value)
# Deprecated group/name - [DEFAULT]/ipxe_deploy
#ipxe_enabled = true
# Maximum number of attempts the scheduler will make when deploying
# the instance. You should keep it greater or equal to the number of
# bare metal nodes you expect to deploy at once to work around
# potential race condition when scheduling. (integer value)
# Minimum value: 1
#scheduler_max_attempts = 30
# Whether to clean overcloud nodes (wipe the hard drive) between
# deployments and after the introspection. (boolean value)
#clean_nodes = false
# DEPRECATED: List of enabled bare metal drivers. (list value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Please switch to hardware types and the
# enabled_hardware_types option.
#enabled_drivers = pxe_ipmitool,pxe_drac,pxe_ilo
# List of enabled bare metal hardware types (next generation drivers).
# (list value)
#enabled_hardware_types = ipmi,redfish,ilo,idrac
# An optional docker 'registry-mirror' that will beconfigured in
# /etc/docker/daemon.json. (string value)
#docker_registry_mirror =
# List of additional architectures enabled in your cloud environment.
# The list of supported values is: ppc64le (list value)
#additional_architectures =
# Enable support for routed ctlplane networks. (boolean value)
#enable_routed_networks = false
[auth]
#
# From instack-undercloud
#
# Password used for MySQL root user. If left unset, one will be
# automatically generated. (string value)
#undercloud_db_password = <None>
# Keystone admin token. If left unset, one will be automatically
# generated. (string value)
#undercloud_admin_token = <None>
# Keystone admin password. If left unset, one will be automatically
# generated. (string value)
#undercloud_admin_password = <None>
# Glance service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_glance_password = <None>
# Heat db encryption key(must be 16, 24, or 32 characters. If left
# unset, one will be automatically generated. (string value)
#undercloud_heat_encryption_key = <None>
# Heat service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_heat_password = <None>
# Heat cfn service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_heat_cfn_password = <None>
# Neutron service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_neutron_password = <None>
# Nova service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_nova_password = <None>
# Ironic service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_ironic_password = <None>
# Aodh service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_aodh_password = <None>
# Gnocchi service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_gnocchi_password = <None>
# Ceilometer service password. If left unset, one will be
# automatically generated. (string value)
#undercloud_ceilometer_password = <None>
# Panko service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_panko_password = <None>
# Ceilometer metering secret. If left unset, one will be automatically
# generated. (string value)
#undercloud_ceilometer_metering_secret = <None>
# Ceilometer snmpd read-only user. If this value is changed from the
# default, the new value must be passed in the overcloud environment
# as the parameter SnmpdReadonlyUserName. This value must be between 1
# and 32 characters long. (string value)
#undercloud_ceilometer_snmpd_user = ro_snmp_user
# Ceilometer snmpd password. If left unset, one will be automatically
# generated. (string value)
#undercloud_ceilometer_snmpd_password = <None>
# Swift service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_swift_password = <None>
# Mistral service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_mistral_password = <None>
# Rabbitmq cookie. If left unset, one will be automatically generated.
# (string value)
#undercloud_rabbit_cookie = <None>
# Rabbitmq password. If left unset, one will be automatically
# generated. (string value)
#undercloud_rabbit_password = <None>
# Rabbitmq username. If left unset, one will be automatically
# generated. (string value)
#undercloud_rabbit_username = <None>
# Heat stack domain admin password. If left unset, one will be
# automatically generated. (string value)
#undercloud_heat_stack_domain_admin_password = <None>
# Swift hash suffix. If left unset, one will be automatically
# generated. (string value)
#undercloud_swift_hash_suffix = <None>
# HAProxy stats password. If left unset, one will be automatically
# generated. (string value)
#undercloud_haproxy_stats_password = <None>
# Zaqar password. If left unset, one will be automatically generated.
# (string value)
#undercloud_zaqar_password = <None>
# Horizon secret key. If left unset, one will be automatically
# generated. (string value)
#undercloud_horizon_secret_key = <None>
# Cinder service password. If left unset, one will be automatically
# generated. (string value)
#undercloud_cinder_password = <None>
# Novajoin vendordata plugin service password. If left unset, one will
# be automatically generated. (string value)
#undercloud_novajoin_password = <None>
[ctlplane-subnet]
#
# From instack-undercloud
#
# Network CIDR for the Neutron-managed subnet for Overcloud instances.
# (string value)
# Deprecated group/name - [DEFAULT]/network_cidr
#cidr = 192.168.24.0/24
# Start of DHCP allocation range for PXE and DHCP of Overcloud
# instances on this network. (string value)
# Deprecated group/name - [DEFAULT]/dhcp_start
#dhcp_start = 192.168.24.5
# End of DHCP allocation range for PXE and DHCP of Overcloud instances
# on this network. (string value)
# Deprecated group/name - [DEFAULT]/dhcp_end
#dhcp_end = 192.168.24.24
# Temporary IP range that will be given to nodes on this network
# during the inspection process. Should not overlap with the range
# defined by dhcp_start and dhcp_end, but should be in the same ip
# subnet. (string value)
# Deprecated group/name - [DEFAULT]/inspection_iprange
#inspection_iprange = 192.168.24.100,192.168.24.120
# Network gateway for the Neutron-managed network for Overcloud
# instances on this network. (string value)
# Deprecated group/name - [DEFAULT]/network_gateway
#gateway = 192.168.24.1
# The network will be masqueraded for external access. (boolean value)
#masquerade = false