openstack
/
ironic-inspector
Code Issues Proposed changes
ironic-inspector/doc/source/install/index.rst

362 lines
13 KiB
ReStructuredText
Raw Blame History

Install Guide
=============
Install from PyPI_ (you may want to use virtualenv to isolate your
environment)::
pip install ironic-inspector
Also there is a `DevStack <https://docs.openstack.org/devstack/latest/>`_
plugin for **ironic-inspector** - see :ref:`contributing_link` for the
current status.
Finally, some distributions (e.g. Fedora) provide **ironic-inspector**
packaged, some of them - under its old name *ironic-discoverd*.
There are several projects you can use to set up **ironic-inspector** in
production. `puppet-ironic
<https://git.openstack.org/cgit/openstack/puppet-ironic/>`_ provides Puppet
manifests, while `bifrost <https://docs.openstack.org/bifrost/latest/>`_
provides an Ansible-based standalone installer. Refer to Configuration_
if you plan on installing **ironic-inspector** manually.
.. _PyPI: https://pypi.python.org/pypi/ironic-inspector
.. note::
Please beware of :ref:`possible DNS issues <ubuntu-dns>` when installing
**ironic-inspector** on Ubuntu.
Version Support Matrix
----------------------
**ironic-inspector** currently requires the Bare Metal API version
``1.11`` to be provided by **ironic**. This version is available starting
with the Liberty release of **ironic**.
Here is a mapping between the ironic versions and the supported
ironic-inspector versions. The Standalone column shows which
ironic-inspector versions can be used in standalone mode with each
ironic version. The Inspection Interface column shows which
ironic-inspector versions can be used with the inspection interface in
each version of **ironic**.
============== ============ ====================
Ironic Version Standalone Inspection Interface
============== ============ ====================
Juno 1.0 N/A
Kilo 1.0 - 2.2 1.0 - 1.1
Liberty 1.1 - 2.2.7 2.0 - 2.2.7
Mitaka 2.3 - 3.X 2.3 - 3.X
Newton 3.3 - 4.X 3.3 - 4.X
Ocata+ 5.0 - 5.X 5.0 - 5.X
============== ============ ====================
.. note::
``3.X`` means there are no specific plans to deprecate support for this
ironic version. This does not imply that it will be supported forever.
Configuration
-------------
Copy ``example.conf`` to some permanent place
(e.g. ``/etc/ironic-inspector/inspector.conf``).
Fill in these minimum configuration values:
* The ``keystone_authtoken`` section - credentials to use when checking user
authentication.
* The ``ironic`` section - credentials to use when accessing **ironic**
API.
* ``connection`` in the ``database`` section - SQLAlchemy connection string
for the database.
* ``dnsmasq_interface`` in the ``firewall`` section - interface on which
``dnsmasq`` (or another DHCP service) listens for PXE boot requests
(defaults to ``br-ctlplane`` which is a sane default for **tripleo**-based
installations but is unlikely to work for other cases).
See comments inside `example.conf
<https://github.com/openstack/ironic-inspector/blob/master/example.conf>`_
for other possible configuration options.
.. note::
Configuration file contains a password and thus should be owned by ``root``
and should have access rights like ``0600``.
Here is an example *inspector.conf* (adapted from a gate run)::
[DEFAULT]
debug = false
rootwrap_config = /etc/ironic-inspector/rootwrap.conf
[database]
connection = mysql+pymysql://root:<PASSWORD>@127.0.0.1/ironic_inspector?charset=utf8
[firewall]
dnsmasq_interface = br-ctlplane
[ironic]
os_region = RegionOne
project_name = service
password = <PASSWORD>
username = ironic-inspector
auth_url = http://127.0.0.1/identity
auth_type = password
[keystone_authtoken]
auth_uri = http://127.0.0.1/identity
project_name = service
password = <PASSWORD>
username = ironic-inspector
auth_url = http://127.0.0.1/identity_v2_admin
auth_type = password
[processing]
ramdisk_logs_dir = /var/log/ironic-inspector/ramdisk
store_data = swift
[swift]
os_region = RegionOne
project_name = service
password = <PASSWORD>
username = ironic-inspector
auth_url = http://127.0.0.1/identity
auth_type = password
.. note::
Set ``debug = true`` if you want to see complete logs.
**ironic-inspector** requires root rights for managing ``iptables``. It
gets them by running ``ironic-inspector-rootwrap`` utility with ``sudo``.
To allow it, copy file ``rootwrap.conf`` and directory ``rootwrap.d`` to the
configuration directory (e.g. ``/etc/ironic-inspector/``) and create file
``/etc/sudoers.d/ironic-inspector-rootwrap`` with the following content::
Defaults:stack !requiretty
stack ALL=(root) NOPASSWD: /usr/bin/ironic-inspector-rootwrap /etc/ironic-inspector/rootwrap.conf *
.. DANGER::
Be very careful about typos in ``/etc/sudoers.d/ironic-inspector-rootwrap``
as any typo will break sudo for **ALL** users on the system. Especially,
make sure there is a new line at the end of this file.
.. note::
``rootwrap.conf`` and all files in ``rootwrap.d`` must be writeable
only by root.
.. note::
If you store ``rootwrap.d`` in a different location, make sure to update
the *filters_path* option in ``rootwrap.conf`` to reflect the change.
If your ``rootwrap.conf`` is in a different location, then you need
to update the *rootwrap_config* option in ``ironic-inspector.conf``
to point to that location.
Replace ``stack`` with whatever user you'll be using to run
**ironic-inspector**.
Configuring IPA
~~~~~~~~~~~~~~~
ironic-python-agent_ is a ramdisk developed for **ironic** and support
for **ironic-inspector** was added during the Liberty cycle. This is the
default ramdisk starting with the Mitaka release.
.. note::
You need at least 1.5 GiB of RAM on the machines to use IPA built with
diskimage-builder_ and at least 384 MiB to use the *TinyIPA*.
To build an **ironic-python-agent** ramdisk, do the following:
* Get the new enough version of diskimage-builder_::
sudo pip install -U "diskimage-builder>=1.1.2"
* Build the ramdisk::
disk-image-create ironic-agent fedora -o ironic-agent
.. note::
Replace "fedora" with your distribution of choice.
* Use the resulting files ``ironic-agent.kernel`` and
``ironic-agent.initramfs`` in the following instructions to set PXE or iPXE.
Alternatively, you can download a `prebuilt TinyIPA image
<http://tarballs.openstack.org/ironic-python-agent/tinyipa/files/>`_ or use
the `other builders
<https://docs.openstack.org/ironic-python-agent/latest/install/index.html#image-builders>`_.
.. _diskimage-builder: https://docs.openstack.org/diskimage-builder/latest/
.. _ironic-python-agent: https://docs.openstack.org/ironic-python-agent/latest/
Configuring PXE
~~~~~~~~~~~~~~~
For the PXE boot environment, you'll need:
* TFTP server running and accessible (see below for using *dnsmasq*).
Ensure ``pxelinux.0`` is present in the TFTP root.
Copy ``ironic-agent.kernel`` and ``ironic-agent.initramfs`` to the TFTP
root as well.
* Next, setup ``$TFTPROOT/pxelinux.cfg/default`` as follows::
default introspect
label introspect
kernel ironic-agent.kernel
append initrd=ironic-agent.initramfs ipa-inspection-callback-url=http://{IP}:5050/v1/continue systemd.journald.forward_to_console=yes
ipappend 3
Replace ``{IP}`` with IP of the machine (do not use loopback interface, it
will be accessed by ramdisk on a booting machine).
.. note::
While ``systemd.journald.forward_to_console=yes`` is not actually
required, it will substantially simplify debugging if something
goes wrong. You can also enable IPA debug logging by appending
``ipa-debug=1``.
IPA is pluggable: you can insert introspection plugins called
*collectors* into it. For example, to enable a very handy ``logs`` collector
(sending ramdisk logs to **ironic-inspector**), modify the ``append``
line in ``$TFTPROOT/pxelinux.cfg/default``::
append initrd=ironic-agent.initramfs ipa-inspection-callback-url=http://{IP}:5050/v1/continue ipa-inspection-collectors=default,logs systemd.journald.forward_to_console=yes
.. note::
You probably want to always keep the ``default`` collector, as it provides
the basic information required for introspection.
* You need PXE boot server (e.g. *dnsmasq*) running on **the same** machine as
**ironic-inspector**. Don't do any firewall configuration:
**ironic-inspector** will handle it for you. In **ironic-inspector**
configuration file set ``dnsmasq_interface`` to the interface your
PXE boot server listens on. Here is an example *dnsmasq.conf*::
port=0
interface={INTERFACE}
bind-interfaces
dhcp-range={DHCP IP RANGE, e.g. 192.168.0.50,192.168.0.150}
enable-tftp
tftp-root={TFTP ROOT, e.g. /tftpboot}
dhcp-boot=pxelinux.0
dhcp-sequential-ip
.. note::
``dhcp-sequential-ip`` is used because otherwise a lot of nodes booting
simultaneously cause conflicts - the same IP address is suggested to
several nodes.
Configuring iPXE
~~~~~~~~~~~~~~~~
iPXE allows better scaling as it primarily uses the HTTP protocol instead of
slow and unreliable TFTP. You still need a TFTP server as a fallback for
nodes not supporting iPXE. To use iPXE, you'll need:
* TFTP server running and accessible (see above for using *dnsmasq*).
Ensure ``undionly.kpxe`` is present in the TFTP root. If any of your nodes
boot with UEFI, you'll also need ``ipxe.efi`` there.
* You also need an HTTP server capable of serving static files.
Copy ``ironic-agent.kernel`` and ``ironic-agent.initramfs`` there.
* Create a file called ``inspector.ipxe`` in the HTTP root (you can name and
place it differently, just don't forget to adjust the *dnsmasq.conf* example
below)::
#!ipxe
:retry_dhcp
dhcp || goto retry_dhcp
:retry_boot
imgfree
kernel --timeout 30000 http://{IP}:8088/ironic-agent.kernel ipa-inspection-callback-url=http://{IP}>:5050/v1/continue systemd.journald.forward_to_console=yes BOOTIF=${mac} initrd=agent.ramdisk || goto retry_boot
initrd --timeout 30000 http://{IP}:8088/ironic-agent.ramdisk || goto retry_boot
boot
.. note::
Older versions of the iPXE ROM tend to misbehave on unreliable network
connection, thus we use the timeout option with retries.
Just like with PXE, you can customize the list of collectors by appending
the ``ipa-inspector-collectors`` kernel option. For example::
ipa-inspection-collectors=default,logs,extra_hardware
* Just as with PXE, you'll need a PXE boot server. The configuration, however,
will be different. Here is an example *dnsmasq.conf*::
port=0
interface={INTERFACE}
bind-interfaces
dhcp-range={DHCP IP RANGE, e.g. 192.168.0.50,192.168.0.150}
enable-tftp
tftp-root={TFTP ROOT, e.g. /tftpboot}
dhcp-sequential-ip
dhcp-match=ipxe,175
dhcp-match=set:efi,option:client-arch,7
dhcp-boot=tag:ipxe,http://{IP}:8088/inspector.ipxe
dhcp-boot=tag:efi,ipxe.efi
dhcp-boot=undionly.kpxe,localhost.localdomain,{IP}
First, we configure the same common parameters as with PXE. Then we define
``ipxe`` and ``efi`` tags. Nodes already supporting iPXE are ordered to
download and execute ``inspector.ipxe``. Nodes without iPXE booted with UEFI
will get ``ipxe.efi`` firmware to execute, while the remaining will get
``undionly.kpxe``.
Managing the **ironic-inspector** Database
------------------------------------------
**ironic-inspector** provides a command line client for managing its
database. This client can be used for upgrading, and downgrading the database
using `alembic <https://alembic.readthedocs.org/>`_ migrations.
If this is your first time running **ironic-inspector** to migrate the
database, simply run:
::
ironic-inspector-dbsync --config-file /etc/ironic-inspector/inspector.conf upgrade
If you have previously run a version of **ironic-inspector** earlier than
2.2.0, the safest thing is to delete the existing SQLite database and run
``upgrade`` as shown above. However, if you want to save the existing
database, to ensure your database will work with the migrations, you'll need to
run an extra step before upgrading the database. You only need to do this the
first time running version 2.2.0 or later.
If you are upgrading from **ironic-inspector** version 2.1.0 or lower:
::
ironic-inspector-dbsync --config-file /etc/ironic-inspector/inspector.conf stamp --revision 578f84f38d
ironic-inspector-dbsync --config-file /etc/ironic-inspector/inspector.conf upgrade
If you are upgrading from a git master install of the **ironic-inspector**
after :ref:`rules <introspection_rules>` were introduced:
::
ironic-inspector-dbsync --config-file /etc/ironic-inspector/inspector.conf stamp --revision d588418040d
ironic-inspector-dbsync --config-file /etc/ironic-inspector/inspector.conf upgrade
Other available commands can be discovered by running::
ironic-inspector-dbsync --help
Running
-------
::
ironic-inspector --config-file /etc/ironic-inspector/inspector.conf
A good starting point for writing your own *systemd* unit should be `one used
in Fedora <http://pkgs.fedoraproject.org/cgit/openstack-ironic-discoverd.git/plain/openstack-ironic-discoverd.service>`_
(note usage of old name).
View Git Blame Copy Permalink