A Python agent for provisioning and deprovisioning Bare Metal servers.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 

1050 lines
46 KiB

# Copyright 2015 Red Hat, Inc.
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
import os
import re
import shlex
import shutil
import stat
import tempfile
from ironic_lib import utils as ilib_utils
from oslo_concurrency import processutils
from oslo_config import cfg
from oslo_log import log
from ironic_python_agent import errors
from ironic_python_agent.extensions import base
from ironic_python_agent.extensions import iscsi
from ironic_python_agent import hardware
from ironic_python_agent import raid_utils
from ironic_python_agent import utils
LOG = log.getLogger(__name__)
CONF = cfg.CONF
BIND_MOUNTS = ('/dev', '/proc', '/run')
BOOTLOADERS_EFI = ['bootaa64.efi', 'bootx64.efi', 'grubaa64.efi',
'winload.efi']
def _rescan_device(device):
"""Force the device to be rescanned
:param device: device upon which to rescan and update
kernel partition records.
"""
try:
utils.execute('partx', '-u', device, attempts=3,
delay_on_retry=True)
utils.execute('udevadm', 'settle')
except processutils.ProcessExecutionError:
LOG.warning("Couldn't re-read the partition table "
"on device %s", device)
def _get_partition(device, uuid):
"""Find the partition of a given device."""
LOG.debug("Find the partition %(uuid)s on device %(dev)s",
{'dev': device, 'uuid': uuid})
try:
_rescan_device(device)
lsblk = utils.execute(
'lsblk', '-PbioKNAME,UUID,PARTUUID,TYPE,LABEL', device)
report = lsblk[0]
for line in report.split('\n'):
part = {}
# Split into KEY=VAL pairs
vals = shlex.split(line)
for key, val in (v.split('=', 1) for v in vals):
part[key] = val.strip()
# Ignore non partition
if part.get('TYPE') not in ['md', 'part']:
# NOTE(TheJulia): This technically creates an edge failure
# case where a filesystem on a whole block device sans
# partitioning would behave differently.
continue
if part.get('UUID') == uuid:
LOG.debug("Partition %(uuid)s found on device "
"%(dev)s", {'uuid': uuid, 'dev': device})
return '/dev/' + part.get('KNAME')
if part.get('PARTUUID') == uuid:
LOG.debug("Partition %(uuid)s found on device "
"%(dev)s", {'uuid': uuid, 'dev': device})
return '/dev/' + part.get('KNAME')
if part.get('LABEL') == uuid:
LOG.debug("Partition %(uuid)s found on device "
"%(dev)s", {'uuid': uuid, 'dev': device})
return '/dev/' + part.get('KNAME')
else:
# NOTE(TheJulia): We may want to consider moving towards using
# findfs in the future, if we're comfortable with the execution
# and interaction. There is value in either way though.
# NOTE(rg): alternative: blkid -l -t UUID=/PARTUUID=
try:
findfs, stderr = utils.execute('findfs', 'UUID=%s' % uuid)
return findfs.strip()
except processutils.ProcessExecutionError as e:
LOG.debug('First fallback detection attempt for locating '
'partition via UUID %(uuid)s failed. '
'Error: %(err)s',
{'uuid': uuid,
'err': e})
try:
findfs, stderr = utils.execute(
'findfs', 'PARTUUID=%s' % uuid)
return findfs.strip()
except processutils.ProcessExecutionError as e:
LOG.debug('Secondary fallback detection attempt for '
'locating partition via UUID %(uuid)s failed. '
'Error: %(err)s',
{'uuid': uuid,
'err': e})
# Last fallback: In case we cannot find the partition by UUID
# and the deploy device is an md device, we check if the md
# device has a partition (which we assume to contain the root fs).
if hardware.is_md_device(device):
md_partition = device + 'p1'
if (os.path.exists(md_partition)
and stat.S_ISBLK(os.stat(md_partition).st_mode)):
LOG.debug("Found md device with partition %s",
md_partition)
return md_partition
else:
LOG.debug('Could not find partition %(part)s on md '
'device %(dev)s',
{'part': md_partition,
'dev': device})
# Partition not found, time to escalate.
error_msg = ("No partition with UUID %(uuid)s found on "
"device %(dev)s" % {'uuid': uuid, 'dev': device})
LOG.error(error_msg)
raise errors.DeviceNotFound(error_msg)
except processutils.ProcessExecutionError as e:
error_msg = ('Finding the partition with UUID %(uuid)s on '
'device %(dev)s failed with %(err)s' %
{'uuid': uuid, 'dev': device, 'err': e})
LOG.error(error_msg)
raise errors.CommandExecutionError(error_msg)
def _has_dracut(root):
try:
utils.execute('chroot %(path)s /bin/sh -c '
'"which dracut"' %
{'path': root}, shell=True)
except processutils.ProcessExecutionError:
return False
return True
def _has_boot_sector(device):
"""Checks the device for a boot sector indicator."""
stdout, stderr = utils.execute('file', '-s', device)
if 'boot sector' not in stdout:
return False
# Now lets check the signature
ddout, dderr = utils.execute(
'dd', 'if=%s' % device, 'bs=218', 'count=1', binary=True)
stdout, stderr = utils.execute('file', '-', process_input=ddout)
# The bytes recovered by dd show as a "dos executable" when
# examined with file. In other words, the bootloader is present.
return 'executable' in stdout
def _find_bootable_device(partitions, dev):
"""Checks the base device and partition for bootloader contents."""
LOG.debug('Looking for a bootable device in %s', dev)
for line in partitions.splitlines():
partition = line.split(':')
try:
if 'boot' in partition[6]:
if _has_boot_sector(dev) or _has_boot_sector(partition[0]):
return True
except IndexError:
continue
return False
def _is_bootloader_loaded(dev):
"""Checks the device to see if a MBR bootloader is present.
:param str dev: Block device upon which to check if it appears
to be bootable via MBR.
:returns: True if a device appears to be bootable with a boot
loader, otherwise False.
"""
boot = hardware.dispatch_to_managers('get_boot_info')
if boot.current_boot_mode != 'bios':
# We're in UEFI mode, this logic is invalid
LOG.debug('Skipping boot sector check as the system is in UEFI '
'boot mode.')
return False
LOG.debug('Starting check for pre-intalled BIOS boot-loader.')
try:
# Looking for things marked "bootable" in the partition table
stdout, stderr = utils.execute('parted', dev, '-s', '-m',
'--', 'print')
except processutils.ProcessExecutionError:
return False
return _find_bootable_device(stdout, dev)
def _get_efi_bootloaders(location):
"""Get all valid efi bootloaders in a given location
:param location: the location where it should start looking for the
efi files.
:return: a list of valid efi bootloaders
"""
# Let's find all files with .efi or .EFI extension
LOG.debug('Looking for all efi files on %s', location)
valid_bootloaders = []
for root, dirs, files in os.walk(location):
efi_files = [f for f in files if f.lower() in BOOTLOADERS_EFI]
LOG.debug('efi files found in %(location)s : %(efi_files)s',
{'location': location, 'efi_files': str(efi_files)})
for name in efi_files:
efi_f = os.path.join(root, name)
LOG.debug('Checking if %s is executable', efi_f)
if os.access(efi_f, os.X_OK):
v_bl = efi_f.split('/boot/efi')[-1].replace('/', '\\')
LOG.debug('%s is a valid bootloader', v_bl)
valid_bootloaders.append(v_bl)
return valid_bootloaders
def _run_efibootmgr(valid_efi_bootloaders, device, efi_partition):
"""Executes efibootmgr and removes duplicate entries.
:param valid_efi_bootloaders: the list of valid efi bootloaders
:param device: the device to be used
:param efi_partition: the efi partition on the device
"""
# Before updating let's get information about the bootorder
LOG.debug("Getting information about boot order")
utils.execute('efibootmgr')
# NOTE(iurygregory): regex used to identify the Warning in the stderr after
# we add the new entry. Example:
# "efibootmgr: ** Warning ** : Boot0004 has same label ironic"
duplicated_label = re.compile(r'^.*:\s\*\*.*\*\*\s:\s.*'
r'Boot([0-9a-f-A-F]+)\s.*$')
label_id = 1
for v_efi_bl_path in valid_efi_bootloaders:
# Update the nvram using efibootmgr
# https://linux.die.net/man/8/efibootmgr
label = 'ironic' + str(label_id)
LOG.debug("Adding loader %(path)s on partition %(part)s of device "
" %(dev)s", {'path': v_efi_bl_path, 'part': efi_partition,
'dev': device})
cmd = utils.execute('efibootmgr', '-c', '-d', device,
'-p', efi_partition, '-w', '-L', label,
'-l', v_efi_bl_path)
for line in cmd[1].split('\n'):
match = duplicated_label.match(line)
if match:
boot_num = match.group(1)
LOG.debug("Found bootnum %s matching label", boot_num)
utils.execute('efibootmgr', '-b', boot_num, '-B')
label_id += 1
def _manage_uefi(device, efi_system_part_uuid=None):
"""Manage the device looking for valid efi bootloaders to update the nvram.
This method checks for valid efi bootloaders in the device, if they exists
it updates the nvram using the efibootmgr.
:param device: the device to be checked.
:param efi_system_part_uuid: efi partition uuid.
:raises: DeviceNotFound if the efi partition cannot be found.
:return: True - if it founds any efi bootloader and the nvram was updated
using the efibootmgr.
False - if no efi bootloader is found.
"""
efi_partition_mount_point = None
efi_mounted = False
try:
# Force UEFI to rescan the device. Required if the deployment
# was over iscsi.
_rescan_device(device)
local_path = tempfile.mkdtemp()
# Trust the contents on the disk in the event of a whole disk image.
efi_partition = utils.get_efi_part_on_device(device)
if not efi_partition and efi_system_part_uuid:
# _get_partition returns <device>+<partition> and we only need the
# partition number
partition = _get_partition(device, uuid=efi_system_part_uuid)
try:
efi_partition = int(partition.replace(device, ""))
except ValueError:
# NVMe Devices get a partitioning scheme that is different from
# traditional block devices like SCSI/SATA
efi_partition = int(partition.replace(device + 'p', ""))
if not efi_partition:
# NOTE(dtantsur): we cannot have a valid EFI deployment without an
# EFI partition at all. This code path is easily hit when using an
# image that is not UEFI compatible (which sadly applies to most
# cloud images out there, with a nice exception of Ubuntu).
raise errors.DeviceNotFound(
"No EFI partition could be detected on device %s and "
"EFI partition UUID has not been recorded during deployment "
"(which is often the case for whole disk images). "
"Are you using a UEFI-compatible image?" % device)
efi_partition_mount_point = os.path.join(local_path, "boot/efi")
if not os.path.exists(efi_partition_mount_point):
os.makedirs(efi_partition_mount_point)
# The mount needs the device with the partition, in case the
# device ends with a digit we add a `p` and the partition number we
# found, otherwise we just join the device and the partition number
if device[-1].isdigit():
efi_device_part = '{}p{}'.format(device, efi_partition)
utils.execute('mount', efi_device_part, efi_partition_mount_point)
else:
efi_device_part = '{}{}'.format(device, efi_partition)
utils.execute('mount', efi_device_part, efi_partition_mount_point)
efi_mounted = True
valid_efi_bootloaders = _get_efi_bootloaders(efi_partition_mount_point)
if valid_efi_bootloaders:
_run_efibootmgr(valid_efi_bootloaders, device, efi_partition)
return True
else:
# NOTE(dtantsur): if we have an empty EFI partition, try to use
# grub-install to populate it.
return False
except processutils.ProcessExecutionError as e:
error_msg = ('Could not verify uefi on device %(dev)s'
'failed with %(err)s.' % {'dev': device, 'err': e})
LOG.error(error_msg)
raise errors.CommandExecutionError(error_msg)
finally:
LOG.debug('Executing _manage_uefi clean-up.')
umount_warn_msg = "Unable to umount %(local_path)s. Error: %(error)s"
try:
if efi_mounted:
utils.execute('umount', efi_partition_mount_point,
attempts=3, delay_on_retry=True)
except processutils.ProcessExecutionError as e:
error_msg = ('Umounting efi system partition failed. '
'Attempted 3 times. Error: %s' % e)
LOG.error(error_msg)
raise errors.CommandExecutionError(error_msg)
else:
# If umounting the binds succeed then we can try to delete it
try:
utils.execute('sync')
except processutils.ProcessExecutionError as e:
LOG.warning(umount_warn_msg, {'path': local_path, 'error': e})
else:
# After everything is umounted we can then remove the
# temporary directory
shutil.rmtree(local_path)
# TODO(rg): handle PreP boot parts relocation as well
def _prepare_boot_partitions_for_softraid(device, holders, efi_part,
target_boot_mode):
"""Prepare boot partitions when relevant.
Create either a RAIDed EFI partition or bios boot partitions for software
RAID, according to both target boot mode and disk holders partition table
types.
:param device: the softraid device path
:param holders: the softraid drive members
:param efi_part: when relevant the efi partition coming from the image
deployed on softraid device, can be/is often None
:param target_boot_mode: target boot mode can be bios/uefi/None
or anything else for unspecified
:returns: the path to the ESP md device when target boot mode is uefi,
nothing otherwise.
"""
# Actually any fat partition could be a candidate. Let's assume the
# partition also has the esp flag
if target_boot_mode == 'uefi':
if not efi_part:
LOG.debug("No explicit EFI partition provided. Scanning for any "
"EFI partition located on software RAID device %s to "
"be relocated",
device)
# NOTE: for whole disk images, no efi part uuid will be provided.
# Let's try to scan for esp on the root softraid device. If not
# found, it's fine in most cases to just create an empty esp and
# let grub handle the magic.
efi_part = utils.get_efi_part_on_device(device)
if efi_part:
efi_part = '{}p{}'.format(device, efi_part)
LOG.info("Creating EFI partitions on software RAID holder disks")
# We know that we kept this space when configuring raid,see
# hardware.GenericHardwareManager.create_configuration.
# We could also directly get the EFI partition size.
partsize_mib = raid_utils.ESP_SIZE_MIB
partlabel_prefix = 'uefi-holder-'
efi_partitions = []
for number, holder in enumerate(holders):
# NOTE: see utils.get_partition_table_type_from_specs
# for uefi we know that we have setup a gpt partition table,
# sgdisk can be used to edit table, more user friendly
# for alignment and relative offsets
partlabel = '{}{}'.format(partlabel_prefix, number)
out, _u = utils.execute('sgdisk', '-F', holder)
start_sector = '{}s'.format(out.splitlines()[-1].strip())
out, _u = utils.execute(
'sgdisk', '-n', '0:{}:+{}MiB'.format(start_sector,
partsize_mib),
'-t', '0:ef00', '-c', '0:{}'.format(partlabel), holder)
# Refresh part table
utils.execute("partprobe")
utils.execute("blkid")
target_part, _u = utils.execute(
"blkid", "-l", "-t", "PARTLABEL={}".format(partlabel), holder)
target_part = target_part.splitlines()[-1].split(':', 1)[0]
efi_partitions.append(target_part)
LOG.debug("EFI partition %s created on holder disk %s",
target_part, holder)
# RAID the ESPs, metadata=1.0 is mandatory to be able to boot
md_device = '/dev/md/esp'
LOG.debug("Creating md device {} for the ESPs on {}".format(
md_device, efi_partitions))
utils.execute('mdadm', '--create', md_device, '--force',
'--run', '--metadata=1.0', '--level', '1',
'--raid-devices', len(efi_partitions),
*efi_partitions)
if efi_part:
# Blockdev copy the source ESP and erase it
LOG.debug("Relocating EFI %s to %s", efi_part, md_device)
utils.execute('cp', efi_part, md_device)
LOG.debug("Erasing EFI partition %s", efi_part)
utils.execute('wipefs', '-a', efi_part)
else:
fslabel = 'efi-part'
ilib_utils.mkfs(fs='vfat', path=md_device, label=fslabel)
return md_device
elif target_boot_mode == 'bios':
partlabel_prefix = 'bios-boot-part-'
for number, holder in enumerate(holders):
label = utils.scan_partition_table_type(holder)
if label == 'gpt':
LOG.debug("Creating bios boot partition on disk holder %s",
holder)
out, _u = utils.execute('sgdisk', '-F', holder)
start_sector = '{}s'.format(out.splitlines()[-1].strip())
partlabel = '{}{}'.format(partlabel_prefix, number)
out, _u = utils.execute(
'sgdisk', '-n', '0:{}:+2MiB'.format(start_sector),
'-t', '0:ef02', '-c', '0:{}'.format(partlabel), holder)
# Q: MBR case, could we dd the boot code from the softraid
# (446 first bytes) if we detect a bootloader with
# _is_bootloader_loaded?
# A: This won't work. Because it includes the address on the
# disk, as in virtual disk, where to load the data from.
# Since there is a structural difference, this means it will
# fail.
def _umount_all_partitions(path, path_variable, umount_warn_msg):
"""Umount all partitions we may have mounted"""
umount_binds_success = True
LOG.debug("Unmounting all vfat partitions inside the image ...")
try:
utils.execute('chroot %(path)s /bin/sh -c "umount -a -t vfat"' %
{'path': path}, shell=True,
env_variables={'PATH': path_variable})
except processutils.ProcessExecutionError as e:
LOG.warning("Unable to umount vfat partitions. Error: %(error)s",
{'error': e})
for fs in BIND_MOUNTS + ('/sys',):
try:
utils.execute('umount', path + fs, attempts=3,
delay_on_retry=True)
except processutils.ProcessExecutionError as e:
umount_binds_success = False
LOG.warning(umount_warn_msg, {'path': path + fs, 'error': e})
return umount_binds_success
def _install_grub2(device, root_uuid, efi_system_part_uuid=None,
prep_boot_part_uuid=None, target_boot_mode='bios'):
"""Install GRUB2 bootloader on a given device."""
LOG.debug("Installing GRUB2 bootloader on device %s", device)
efi_partition = None
efi_part = None
efi_partition_mount_point = None
efi_mounted = False
efi_preserved = False
holders = None
path_variable = _get_path_variable()
# NOTE(TheJulia): Seems we need to get this before ever possibly
# restart the device in the case of multi-device RAID as pyudev
# doesn't exactly like the partition disappearing.
root_partition = _get_partition(device, uuid=root_uuid)
# If the root device is an md device (or partition), restart the device
# (to help grub finding it) and identify the underlying holder disks
# to install grub.
if hardware.is_md_device(device):
# If the root device is an md device (or partition),
# restart the device to help grub find it later on.
hardware.md_restart(device)
# If an md device, we need to rescan the devices anyway to pickup
# the md device partition.
_rescan_device(device)
elif (_is_bootloader_loaded(device)
and not (efi_system_part_uuid
or prep_boot_part_uuid)):
# We always need to put the bootloader in place with software raid
# so it is okay to elif into the skip doing a bootloader step.
LOG.info("Skipping installation of bootloader on device %s "
"as it is already marked bootable.", device)
return
try:
# Mount the partition and binds
path = tempfile.mkdtemp()
if efi_system_part_uuid:
efi_part = _get_partition(device, uuid=efi_system_part_uuid)
efi_partition = efi_part
if hardware.is_md_device(device):
holders = hardware.get_holder_disks(device)
efi_partition = _prepare_boot_partitions_for_softraid(
device, holders, efi_part, target_boot_mode
)
if efi_partition:
efi_partition_mount_point = os.path.join(path, "boot/efi")
# For power we want to install grub directly onto the PreP partition
if prep_boot_part_uuid:
device = _get_partition(device, uuid=prep_boot_part_uuid)
# If the root device is an md device (or partition),
# identify the underlying holder disks to install grub.
if hardware.is_md_device(device):
disks = holders
else:
disks = [device]
utils.execute('mount', root_partition, path)
_mount_for_chroot(path)
# UEFI asset management for RAID is handled elsewhere
if not hardware.is_md_device(device) and efi_partition_mount_point:
# NOTE(TheJulia): It may make sense to retool all efi
# asset preservation logic at some point since the paths
# can be a little different, but largely this is JUST for
# partition images as there _should not_ be a mount
# point if we have no efi partitions at all.
efi_preserved = _try_preserve_efi_assets(
device, path, efi_system_part_uuid,
efi_partition, efi_partition_mount_point)
if efi_preserved:
_append_uefi_to_fstab(path, efi_system_part_uuid)
# Success preserving efi assets
return
else:
# Failure, either via exception or not found
# which in this case the partition needs to be
# remounted.
LOG.debug('No EFI assets were preserved for setup or the '
'ramdisk was unable to complete the setup. '
'falling back to bootloader installation from'
'deployed image.')
if not os.path.ismount(path):
LOG.debug('Re-mounting the root partition.')
utils.execute('mount', root_partition, path)
binary_name = "grub"
if os.path.exists(os.path.join(path, 'usr/sbin/grub2-install')):
binary_name = "grub2"
# Mount all vfat partitions listed in the fstab of the root partition.
# This is to make sure grub2 finds all files it needs, as some of them
# may not be inside the root partition but in the ESP (like grub2env).
LOG.debug("Mounting all partitions inside the image ...")
utils.execute('chroot %(path)s /bin/sh -c "mount -a -t vfat"' %
{'path': path}, shell=True,
env_variables={'PATH': path_variable})
if efi_partition:
if not os.path.exists(efi_partition_mount_point):
os.makedirs(efi_partition_mount_point)
LOG.warning("GRUB2 will be installed for UEFI on efi partition "
"%s using the install command which does not place "
"Secure Boot signed binaries.", efi_partition)
utils.execute('mount', efi_partition, efi_partition_mount_point)
efi_mounted = True
# FIXME(rg): does not work in cross boot mode case (target
# boot mode differs from ramdisk one)
# Probe for the correct target (depends on the arch, example
# --target=x86_64-efi)
utils.execute('chroot %(path)s /bin/sh -c '
'"%(bin)s-install"' %
{'path': path, 'bin': binary_name},
shell=True,
env_variables={
'PATH': path_variable
})
# Also run grub-install with --removable, this installs grub to
# the EFI fallback path. Useful if the NVRAM wasn't written
# correctly, was reset or if testing with virt as libvirt
# resets the NVRAM on instance start.
# This operation is essentially a copy operation. Use of the
# --removable flag, per the grub-install source code changes
# the default file to be copied, destination file name, and
# prevents NVRAM from being updated.
# We only run grub2_install for uefi if we can't verify the
# uefi bits
utils.execute('chroot %(path)s /bin/sh -c '
'"%(bin)s-install --removable"' %
{'path': path, 'bin': binary_name},
shell=True,
env_variables={
'PATH': path_variable
})
utils.execute('umount', efi_partition_mount_point, attempts=3,
delay_on_retry=True)
efi_mounted = False
# NOTE: probably never needed for grub-mkconfig, does not hurt in
# case of doubt, cleaned in the finally clause anyway
utils.execute('mount', efi_partition,
efi_partition_mount_point)
efi_mounted = True
else:
# FIXME(rg): does not work if ramdisk boot mode is not the same
# as the target (--target=i386-pc, arch dependent).
# See previous FIXME
# Install grub. Normally, grub goes to one disk only. In case of
# md devices, grub goes to all underlying holder (RAID-1) disks.
LOG.info("GRUB2 will be installed on disks %s", disks)
for grub_disk in disks:
LOG.debug("Installing GRUB2 on disk %s", grub_disk)
utils.execute(
'chroot %(path)s /bin/sh -c "%(bin)s-install %(dev)s"' %
{
'path': path,
'bin': binary_name,
'dev': grub_disk
},
shell=True,
env_variables={
'PATH': path_variable
}
)
LOG.debug("GRUB2 successfully installed on device %s",
grub_disk)
# NOTE(TheJulia): Setup grub configuration again since IF we reach
# this point, then we've manually installed grub which is not the
# recommended path.
_configure_grub(device, path)
if efi_mounted:
_append_uefi_to_fstab(path, efi_system_part_uuid)
LOG.info("GRUB2 successfully installed on %s", device)
except processutils.ProcessExecutionError as e:
error_msg = ('Installing GRUB2 boot loader to device %(dev)s '
'failed with %(err)s.' % {'dev': device, 'err': e})
LOG.error(error_msg)
raise errors.CommandExecutionError(error_msg)
finally:
LOG.debug('Executing _install_grub2 clean-up.')
# Umount binds and partition
umount_warn_msg = "Unable to umount %(path)s. Error: %(error)s"
# If umount fails for efi partition, then we cannot be sure that all
# the changes were written back to the filesystem.
try:
if efi_mounted:
utils.execute('umount', efi_partition_mount_point, attempts=3,
delay_on_retry=True)
except processutils.ProcessExecutionError as e:
error_msg = ('Umounting efi system partition failed. '
'Attempted 3 times. Error: %s' % e)
LOG.error(error_msg)
raise errors.CommandExecutionError(error_msg)
# If umounting the binds succeed then we can try to delete it
if _umount_all_partitions(path,
path_variable,
umount_warn_msg):
try:
utils.execute('umount', path, attempts=3, delay_on_retry=True)
except processutils.ProcessExecutionError as e:
LOG.warning(umount_warn_msg, {'path': path, 'error': e})
else:
# After everything is umounted we can then remove the
# temporary directory
shutil.rmtree(path)
def _get_path_variable():
# Add /bin to PATH variable as grub requires it to find efibootmgr
# when running in uefi boot mode.
# Add /usr/sbin to PATH variable to ensure it is there as we do
# not use full path to grub binary anymore.
path_variable = os.environ.get('PATH', '')
return '%s:/bin:/usr/sbin:/sbin' % path_variable
def _configure_grub(device, path):
"""Make consolidated grub configuration as it is device aware.
:param device: The device for the filesystem.
:param path: The path in which the filesystem is mounted.
"""
LOG.debug('Attempting to generate grub Configuration')
path_variable = _get_path_variable()
binary_name = "grub"
if os.path.exists(os.path.join(path, 'usr/sbin/grub2-install')):
binary_name = "grub2"
# If the image has dracut installed, set the rd.md.uuid kernel
# parameter for discovered md devices.
if hardware.is_md_device(device) and _has_dracut(path):
rd_md_uuids = ["rd.md.uuid=%s" % x['UUID']
for x in hardware.md_get_raid_devices().values()]
LOG.debug("Setting rd.md.uuid kernel parameters: %s", rd_md_uuids)
with open('%s/etc/default/grub' % path, 'r') as g:
contents = g.read()
with open('%s/etc/default/grub' % path, 'w') as g:
g.write(
re.sub(r'GRUB_CMDLINE_LINUX="(.*)"',
r'GRUB_CMDLINE_LINUX="\1 %s"'
% " ".join(rd_md_uuids),
contents))
utils.execute('chroot %(path)s /bin/sh -c '
'"%(bin)s-mkconfig -o '
'/boot/%(bin)s/grub.cfg"' %
{'path': path, 'bin': binary_name}, shell=True,
env_variables={'PATH': path_variable,
'GRUB_DISABLE_OS_PROBER': 'true',
'GRUB_SAVEDEFAULT': 'true'},
use_standard_locale=True)
LOG.debug('Completed basic grub configuration.')
def _mount_for_chroot(path):
"""Mount items for grub-mkconfig to succeed."""
LOG.debug('Mounting Linux standard partitions for bootloader '
'configuration generation')
for fs in BIND_MOUNTS:
utils.execute('mount', '-o', 'bind', fs, path + fs)
utils.execute('mount', '-t', 'sysfs', 'none', path + '/sys')
def _try_preserve_efi_assets(device, path,
efi_system_part_uuid,
efi_partition,
efi_partition_mount_point):
"""Attempt to preserve UEFI boot assets.
:param device: The device upon which wich to try to preserve
assets.
:param path: The path in which the filesystem is already mounted
which we should examine to preserve assets from.
:param efi_system_part_uuid: The partition ID representing the
created EFI system partition.
:param efi_partition: The partitions upon wich to write the preserved
assets to.
:param efi_partition_mount_point: The folder at which to mount
the assets for the process of
preservation.
:returns: True if assets have been preserved, otherwise False.
None is the result of this method if a failure has
occured.
"""
efi_assets_folder = efi_partition_mount_point + '/EFI'
if os.path.exists(efi_assets_folder):
# We appear to have EFI Assets, that need to be preserved
# and as such if we succeed preserving them, we will be returned
# True from _preserve_efi_assets to correspond with success or
# failure in this action.
# NOTE(TheJulia): Still makes sense to invoke grub-install as
# fragmentation of grub has occured.
if (os.path.exists(os.path.join(path, 'usr/sbin/grub2-install'))
or os.path.exists(os.path.join(path, 'usr/sbin/grub-install'))):
_configure_grub(device, path)
# But first, if we have grub, we should try to build a grub config!
LOG.debug('EFI asset folder detected, attempting to preserve assets.')
if _preserve_efi_assets(path, efi_assets_folder,
efi_partition,
efi_partition_mount_point):
try:
# Since we have preserved the assets, we should be able
# to call the _efi_boot_setup method to scan the device
# and add loader entries
efi_preserved = _efi_boot_setup(device, efi_system_part_uuid)
# Executed before the return so we don't return and then begin
# execution.
return efi_preserved
except Exception as e:
# Remount the partition and proceed as we were.
LOG.debug('Exception encountered while attempting to '
'setup the EFI loader from a root '
'filesystem. Error: %s', e)
def _append_uefi_to_fstab(fs_path, efi_system_part_uuid):
"""Append the efi partition id to the filesystem table.
:param fs_path:
:param efi_system_part_uuid:
"""
fstab_file = os.path.join(fs_path, 'etc/fstab')
if not os.path.exists(fstab_file):
return
try:
fstab_string = ("UUID=%s\t/boot/efi\tvfat\tumask=0077\t"
"0\t1\n") % efi_system_part_uuid
with open(fstab_file, "r+") as fstab:
if efi_system_part_uuid not in fstab.read():
fstab.writelines(fstab_string)
except (OSError, EnvironmentError, IOError) as exc:
LOG.debug('Failed to add entry to /etc/fstab. Error %s', exc)
LOG.debug('Added entry to /etc/fstab for EFI partition auto-mount '
'with uuid %s', efi_system_part_uuid)
def _efi_boot_setup(device, efi_system_part_uuid=None, target_boot_mode=None):
"""Identify and setup an EFI bootloader from supplied partition/disk.
:param device: The device upon which to attempt the EFI bootloader setup.
:param efi_system_part_uuid: The partition UUID to utilize in searching
for an EFI bootloader.
:param target_boot_mode: The requested boot mode target for the
machine. This is optional and is mainly used
for the purposes of identifying a mismatch and
reporting a warning accordingly.
:returns: True if we succeeded in setting up an EFI bootloader in the
EFI nvram table.
False if we were unable to set the machine to EFI boot,
due to inability to locate assets required OR the efibootmgr
tool not being present.
None is returned if the node is NOT in UEFI boot mode or
the system is deploying upon a software RAID device.
"""
boot = hardware.dispatch_to_managers('get_boot_info')
# Explicitly only run if a target_boot_mode is set which prevents
# callers following-up from re-logging the same message
if target_boot_mode and boot.current_boot_mode != target_boot_mode:
LOG.warning('Boot mode mismatch: target boot mode is %(target)s, '
'current boot mode is %(current)s. Installing boot '
'loader may fail or work incorrectly.',
{'target': target_boot_mode,
'current': boot.current_boot_mode})
# FIXME(arne_wiebalck): make software RAID work with efibootmgr
if (boot.current_boot_mode == 'uefi'
and not hardware.is_md_device(device)):
try:
utils.execute('efibootmgr', '--version')
except FileNotFoundError:
LOG.warning("efibootmgr is not available in the ramdisk")
else:
if _manage_uefi(device,
efi_system_part_uuid=efi_system_part_uuid):
return True
return False
def _preserve_efi_assets(path, efi_assets_folder, efi_partition,
efi_partition_mount_point):
"""Preserve the EFI assets in a partition image.
:param path: The path used for the mounted image filesystem.
:param efi_assets_folder: The folder where we can find the
UEFI assets required for booting.
:param efi_partition: The partition upon which to write the
perserved assets to.
:param efi_partition_mount_point: The folder at which to mount
the assets for the process of
preservation.
:returns: True if EFI assets were able to be located and preserved
to their appropriate locations based upon the supplied
efi_partition.
False if any error is encountered in this process.
"""
try:
save_efi = os.path.join(tempfile.mkdtemp(), 'efi_loader')
LOG.debug('Copying EFI assets to %s.', save_efi)
shutil.copytree(efi_assets_folder, save_efi)
# Identify grub2 config file for EFI booting as grub may require it
# in the folder.
destlist = os.listdir(efi_assets_folder)
grub2_file = os.path.join(path, 'boot/grub2/grub.cfg')
if os.path.isfile(grub2_file):
LOG.debug('Local Grub2 configuration detected.')
# A grub2 config seems to be present, we should preserve it!
for dest in destlist:
grub_dest = os.path.join(save_efi, dest, 'grub.cfg')
if not os.path.isfile(grub_dest):
LOG.debug('A grub.cfg file was not found in %s. %s'
'will be copied to that location.',
grub_dest, grub2_file)
try:
shutil.copy2(grub2_file, grub_dest)
except (IOError, OSError, shutil.SameFileError) as e:
LOG.warning('Failed to copy grub.cfg file for '
'EFI boot operation. Error %s', e)
grub2_env_file = os.path.join(path, 'boot/grub2/grubenv')
# NOTE(TheJulia): By saving the default, this file should be created.
# this appears to what diskimage-builder does.
# if the file is just a file, then we'll need to copy it. If it is
# anything else like a link, we're good. This behaivor is inconsistent
# depending on packager install scripts for grub.
if os.path.isfile(grub2_env_file):
LOG.debug('Detected grub environment file %s, will attempt '
'to copy this file to align with apparent bootloaders',
grub2_env_file)
for dest in destlist:
grub2env_dest = os.path.join(save_efi, dest, 'grubenv')
if not os.path.isfile(grub2env_dest):
LOG.debug('A grubenv file was not found. Copying '
'to %s along with the grub.cfg file as '
'grub generally expects it is present.',
grub2env_dest)
try:
shutil.copy2(grub2_env_file, grub2env_dest)
except (IOError, OSError, shutil.SameFileError) as e:
LOG.warning('Failed to copy grubenv file. '
'Error: %s', e)
utils.execute('mount', '-t', 'vfat', efi_partition,
efi_partition_mount_point)
shutil.copytree(save_efi, efi_assets_folder)
LOG.debug('Files preserved to %(disk)s for %(part)s. '
'Files: %(filelist)s From: %(from)s',
{'disk': efi_partition,
'part': efi_partition_mount_point,
'filelist': os.listdir(efi_assets_folder),
'from': save_efi})
utils.execute('umount', efi_partition_mount_point)
return True
except Exception as e:
LOG.debug('Failed to preserve EFI assets. Error %s', e)
try:
utils.execute('umount', efi_partition_mount_point)
except Exception as e:
LOG.debug('Exception encountered while attempting unmount '
'the EFI partition mount point. Error: %s', e)
return False
class ImageExtension(base.BaseAgentExtension):
@base.async_command('install_bootloader')
def install_bootloader(self, root_uuid, efi_system_part_uuid=None,
prep_boot_part_uuid=None,
target_boot_mode='bios',
ignore_bootloader_failure=None):
"""Install the GRUB2 bootloader on the image.
:param root_uuid: The UUID of the root partition.
:param efi_system_part_uuid: The UUID of the efi system partition.
To be used only for uefi boot mode. For uefi boot mode, the
boot loader will be installed here.
:param prep_boot_part_uuid: The UUID of the PReP Boot partition.
Used only for booting ppc64* partition images locally. In this
scenario the bootloader will be installed here.
:param target_boot_mode: bios, uefi. Only taken into account
for softraid, when no efi partition is explicitely provided
(happens for whole disk images)
:raises: CommandExecutionError if the installation of the
bootloader fails.
:raises: DeviceNotFound if the root partition is not found.
"""
device = hardware.dispatch_to_managers('get_os_install_device')
if self.agent.iscsi_started:
iscsi.clean_up(device)
# Always allow the API client to be the final word on if this is
# overridden or not.
if ignore_bootloader_failure is None:
ignore_failure = CONF.ignore_bootloader_failure
else:
ignore_failure = ignore_bootloader_failure
try:
if _efi_boot_setup(device, efi_system_part_uuid, target_boot_mode):
return
except Exception as e:
LOG.error('Error setting up bootloader. Error %s', e)
if not ignore_failure:
raise
# We don't have a working root UUID detection for whole disk images.
# Until we can do it, avoid a confusing traceback.
if root_uuid == '0x00000000' or root_uuid is None:
LOG.info('Not using grub2-install since root UUID is not provided.'
' Assuming a whole disk image')
return
# In case we can't use efibootmgr for uefi we will continue using grub2
LOG.debug('Using grub2-install to set up boot files')
try:
_install_grub2(device,
root_uuid=root_uuid,
efi_system_part_uuid=efi_system_part_uuid,
prep_boot_part_uuid=prep_boot_part_uuid,
target_boot_mode=target_boot_mode)
except Exception as e:
LOG.error('Error setting up bootloader. Error %s', e)
if not ignore_failure:
raise