A Python agent for provisioning and deprovisioning Bare Metal servers.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
ironic-python-agent/ironic_python_agent/extensions/image.py

736 lines
32 KiB

# Copyright 2015 Red Hat, Inc.
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
import os
import re
import shlex
import shutil
import stat
import tempfile
from ironic_lib import utils as ilib_utils
from oslo_concurrency import processutils
from oslo_log import log
from ironic_python_agent import errors
from ironic_python_agent.extensions import base
from ironic_python_agent.extensions import iscsi
from ironic_python_agent import hardware
from ironic_python_agent import raid_utils
from ironic_python_agent import utils
LOG = log.getLogger(__name__)
BIND_MOUNTS = ('/dev', '/proc', '/run')
BOOTLOADERS_EFI = ['bootx64.efi', 'grubaa64.efi', 'winload.efi']
def _rescan_device(device):
"""Force the device to be rescanned
:param device: device upon which to rescan and update
kernel partition records.
"""
try:
utils.execute('partx', '-u', device, attempts=3,
delay_on_retry=True)
utils.execute('udevadm', 'settle')
except processutils.ProcessExecutionError:
LOG.warning("Couldn't re-read the partition table "
"on device %s", device)
def _get_partition(device, uuid):
"""Find the partition of a given device."""
LOG.debug("Find the partition %(uuid)s on device %(dev)s",
{'dev': device, 'uuid': uuid})
try:
_rescan_device(device)
lsblk = utils.execute('lsblk', '-PbioKNAME,UUID,PARTUUID,TYPE', device)
report = lsblk[0]
for line in report.split('\n'):
part = {}
# Split into KEY=VAL pairs
vals = shlex.split(line)
for key, val in (v.split('=', 1) for v in vals):
part[key] = val.strip()
# Ignore non partition
if part.get('TYPE') not in ['md', 'part']:
# NOTE(TheJulia): This technically creates an edge failure
# case where a filesystem on a whole block device sans
# partitioning would behave differently.
continue
if part.get('UUID') == uuid:
LOG.debug("Partition %(uuid)s found on device "
"%(dev)s", {'uuid': uuid, 'dev': device})
return '/dev/' + part.get('KNAME')
if part.get('PARTUUID') == uuid:
LOG.debug("Partition %(uuid)s found on device "
"%(dev)s", {'uuid': uuid, 'dev': device})
return '/dev/' + part.get('KNAME')
else:
# NOTE(TheJulia): We may want to consider moving towards using
# findfs in the future, if we're comfortable with the execution
# and interaction. There is value in either way though.
# NOTE(rg): alternative: blkid -l -t UUID=/PARTUUID=
try:
findfs, stderr = utils.execute('findfs', 'UUID=%s' % uuid)
return findfs.strip()
except processutils.ProcessExecutionError as e:
LOG.debug('First fallback detection attempt for locating '
'partition via UUID %(uuid)s failed. '
'Error: %(err)s',
{'uuid': uuid,
'err': e})
try:
findfs, stderr = utils.execute(
'findfs', 'PARTUUID=%s' % uuid)
return findfs.strip()
except processutils.ProcessExecutionError as e:
LOG.debug('Secondary fallback detection attempt for '
'locating partition via UUID %(uuid)s failed. '
'Error: %(err)s',
{'uuid': uuid,
'err': e})
# Last fallback: In case we cannot find the partition by UUID
# and the deploy device is an md device, we check if the md
# device has a partition (which we assume to contain the root fs).
if hardware.is_md_device(device):
md_partition = device + 'p1'
if (os.path.exists(md_partition)
and stat.S_ISBLK(os.stat(md_partition).st_mode)):
LOG.debug("Found md device with partition %s",
md_partition)
return md_partition
else:
LOG.debug('Could not find partition %(part)s on md '
'device %(dev)s',
{'part': md_partition,
'dev': device})
# Partition not found, time to escalate.
error_msg = ("No partition with UUID %(uuid)s found on "
"device %(dev)s" % {'uuid': uuid, 'dev': device})
LOG.error(error_msg)
raise errors.DeviceNotFound(error_msg)
except processutils.ProcessExecutionError as e:
error_msg = ('Finding the partition with UUID %(uuid)s on '
'device %(dev)s failed with %(err)s' %
{'uuid': uuid, 'dev': device, 'err': e})
LOG.error(error_msg)
raise errors.CommandExecutionError(error_msg)
def _has_dracut(root):
try:
utils.execute('chroot %(path)s /bin/sh -c '
'"which dracut"' %
{'path': root}, shell=True)
except processutils.ProcessExecutionError:
return False
return True
def _is_bootloader_loaded(dev):
"""Checks the device to see if a MBR bootloader is present.
:param str dev: Block device upon which to check if it appears
to be bootable via MBR.
:returns: True if a device appears to be bootable with a boot
loader, otherwise False.
"""
def _has_boot_sector(device):
"""Check the device for a boot sector indiator."""
stdout, stderr = utils.execute('file', '-s', device)
if 'boot sector' in stdout:
# Now lets check the signature
ddout, dderr = utils.execute(
'dd', 'if=%s' % device, 'bs=218', 'count=1', binary=True)
stdout, stderr = utils.execute('file', '-', process_input=ddout)
# The bytes recovered by dd show as a "dos executable" when
# examined with file. In other words, the bootloader is present.
if 'executable' in stdout:
return True
return False
boot = hardware.dispatch_to_managers('get_boot_info')
if boot.current_boot_mode != 'bios':
# We're in UEFI mode, this logic is invalid
LOG.debug('Skipping boot sector check as the system is in UEFI '
'boot mode.')
return False
LOG.debug('Starting check for pre-intalled BIOS boot-loader.')
try:
# Looking for things marked "bootable" in the partition table
stdout, stderr = utils.execute('parted', dev, '-s', '-m',
'--', 'print')
except processutils.ProcessExecutionError:
return False
lines = stdout.splitlines()
for line in lines:
partition = line.split(':')
try:
# Find the bootable device, and check the base
# device and partition for bootloader contents.
if 'boot' in partition[6]:
if (_has_boot_sector(dev)
or _has_boot_sector(partition[0])):
return True
except IndexError:
continue
return False
def _get_efi_bootloaders(location):
"""Get all valid efi bootloaders in a given location
:param location: the location where it should start looking for the
efi files.
:return: a list of valid efi bootloaders
"""
# Let's find all files with .efi or .EFI extension
LOG.debug('Looking for all efi files on %s', location)
valid_bootloaders = []
for root, dirs, files in os.walk(location):
efi_files = [f for f in files if f.lower() in BOOTLOADERS_EFI]
LOG.debug('efi files found in %(location)s : %(efi_files)s',
{'location': location, 'efi_files': str(efi_files)})
for name in efi_files:
efi_f = os.path.join(root, name)
LOG.debug('Checking if %s is executable', efi_f)
if os.access(efi_f, os.X_OK):
v_bl = efi_f.split('/boot/efi')[-1].replace('/', '\\')
LOG.debug('%s is a valid bootloader', v_bl)
valid_bootloaders.append(v_bl)
return valid_bootloaders
def _run_efibootmgr(valid_efi_bootloaders, device, efi_partition):
"""Executes efibootmgr and removes duplicate entries.
:param valid_efi_bootloaders: the list of valid efi bootloaders
:param device: the device to be used
:param efi_partition: the efi partition on the device
"""
# Before updating let's get information about the bootorder
LOG.debug("Getting information about boot order")
utils.execute('efibootmgr')
# NOTE(iurygregory): regex used to identify the Warning in the stderr after
# we add the new entry. Example:
# "efibootmgr: ** Warning ** : Boot0004 has same label ironic"
duplicated_label = re.compile(r'^.*:\s\*\*.*\*\*\s:\s.*'
r'Boot([0-9a-f-A-F]+)\s.*$')
label_id = 1
for v_efi_bl_path in valid_efi_bootloaders:
# Update the nvram using efibootmgr
# https://linux.die.net/man/8/efibootmgr
label = 'ironic' + str(label_id)
LOG.debug("Adding loader %(path)s on partition %(part)s of device "
" %(dev)s", {'path': v_efi_bl_path, 'part': efi_partition,
'dev': device})
cmd = utils.execute('efibootmgr', '-c', '-d', device,
'-p', efi_partition, '-w', '-L', label,
'-l', v_efi_bl_path)
for line in cmd[1].split('\n'):
match = duplicated_label.match(line)
if match:
boot_num = match.group(1)
LOG.debug("Found bootnum %s matching label", boot_num)
utils.execute('efibootmgr', '-b', boot_num, '-B')
label_id += 1
def _manage_uefi(device, efi_system_part_uuid=None):
"""Manage the device looking for valid efi bootloaders to update the nvram.
This method checks for valid efi bootloaders in the device, if they exists
it updates the nvram using the efibootmgr.
:param device: the device to be checked.
:param efi_system_part_uuid: efi partition uuid.
:return: True - if it founds any efi bootloader and the nvram was updated
using the efibootmgr.
False - if no efi bootloader is found.
"""
efi_partition = None
efi_partition_mount_point = None
efi_mounted = False
try:
# Force UEFI to rescan the device. Required if the deployment
# was over iscsi.
_rescan_device(device)
local_path = tempfile.mkdtemp()
# Trust the contents on the disk in the event of a whole disk image.
efi_partition = utils.get_efi_part_on_device(device)
if not efi_partition:
# _get_partition returns <device>+<partition> and we only need the
# partition number
partition = _get_partition(device, uuid=efi_system_part_uuid)
efi_partition = int(partition.replace(device, ""))
if efi_partition:
efi_partition_mount_point = os.path.join(local_path, "boot/efi")
if not os.path.exists(efi_partition_mount_point):
os.makedirs(efi_partition_mount_point)
# The mount needs the device with the partition, in case the
# device ends with a digit we add a `p` and the partition number we
# found, otherwise we just join the device and the partition number
if device[-1].isdigit():
efi_device_part = '{}p{}'.format(device, efi_partition)
utils.execute('mount', efi_device_part,
efi_partition_mount_point)
else:
efi_device_part = '{}{}'.format(device, efi_partition)
utils.execute('mount', efi_device_part,
efi_partition_mount_point)
efi_mounted = True
else:
# If we can't find the partition we need to decide what should
# happen
return False
valid_efi_bootloaders = _get_efi_bootloaders(efi_partition_mount_point)
if valid_efi_bootloaders:
_run_efibootmgr(valid_efi_bootloaders, device, efi_partition)
return True
else:
return False
except processutils.ProcessExecutionError as e:
error_msg = ('Could not verify uefi on device %(dev)s'
'failed with %(err)s.' % {'dev': device, 'err': e})
LOG.error(error_msg)
raise errors.CommandExecutionError(error_msg)
finally:
umount_warn_msg = "Unable to umount %(local_path)s. Error: %(error)s"
try:
if efi_mounted:
utils.execute('umount', efi_partition_mount_point,
attempts=3, delay_on_retry=True)
except processutils.ProcessExecutionError as e:
error_msg = ('Umounting efi system partition failed. '
'Attempted 3 times. Error: %s' % e)
LOG.error(error_msg)
raise errors.CommandExecutionError(error_msg)
else:
# If umounting the binds succeed then we can try to delete it
try:
utils.execute('sync')
except processutils.ProcessExecutionError as e:
LOG.warning(umount_warn_msg, {'path': local_path, 'error': e})
else:
# After everything is umounted we can then remove the
# temporary directory
shutil.rmtree(local_path)
# TODO(rg): handle PreP boot parts relocation as well
def _prepare_boot_partitions_for_softraid(device, holders, efi_part,
target_boot_mode):
"""Prepare boot partitions when relevant.
Create either efi partitions or bios boot partitions for softraid,
according to both target boot mode and disk holders partition table types.
:param device: the softraid device path
:param holders: the softraid drive members
:param efi_part: when relevant the efi partition coming from the image
deployed on softraid device, can be/is often None
:param target_boot_mode: target boot mode can be bios/uefi/None
or anything else for unspecified
:returns: the efi partition paths on softraid disk holders when target
boot mode is uefi, empty list otherwise.
"""
efi_partitions = []
# Actually any fat partition could be a candidate. Let's assume the
# partition also has the esp flag
if target_boot_mode == 'uefi':
if not efi_part:
LOG.debug("No explicit EFI partition provided. Scanning for any "
"EFI partition located on software RAID device %s to "
"be relocated",
device)
# NOTE: for whole disk images, no efi part uuid will be provided.
# Let's try to scan for esp on the root softraid device. If not
# found, it's fine in most cases to just create an empty esp and
# let grub handle the magic.
efi_part = utils.get_efi_part_on_device(device)
if efi_part:
efi_part = '{}p{}'.format(device, efi_part)
LOG.info("Creating EFI partitions on software RAID holder disks")
# We know that we kept this space when configuring raid,see
# hardware.GenericHardwareManager.create_configuration.
# We could also directly get the EFI partition size.
partsize_mib = raid_utils.ESP_SIZE_MIB
partlabel_prefix = 'uefi-holder-'
for number, holder in enumerate(holders):
# NOTE: see utils.get_partition_table_type_from_specs
# for uefi we know that we have setup a gpt partition table,
# sgdisk can be used to edit table, more user friendly
# for alignment and relative offsets
partlabel = '{}{}'.format(partlabel_prefix, number)
out, _u = utils.execute('sgdisk', '-F', holder)
start_sector = '{}s'.format(out.splitlines()[-1].strip())
out, _u = utils.execute(
'sgdisk', '-n', '0:{}:+{}MiB'.format(start_sector,
partsize_mib),
'-t', '0:ef00', '-c', '0:{}'.format(partlabel), holder)
# Refresh part table
utils.execute("partprobe")
utils.execute("blkid")
target_part, _u = utils.execute(
"blkid", "-l", "-t", "PARTLABEL={}".format(partlabel), holder)
target_part = target_part.splitlines()[-1].split(':', 1)[0]
LOG.debug("EFI partition %s created on holder disk %s",
target_part, holder)
if efi_part:
LOG.debug("Relocating EFI %s to holder part %s", efi_part,
target_part)
# Blockdev copy
utils.execute("cp", efi_part, target_part)
else:
# Creating a label is just to make life easier
if number == 0:
fslabel = 'efi-part'
else:
# bak, label is limited to 11 chars
fslabel = 'efi-part-b'
ilib_utils.mkfs(fs='vfat', path=target_part, label=fslabel)
efi_partitions.append(target_part)
# TBD: Would not hurt to destroy source efi part when defined,
# for clarity.
elif target_boot_mode == 'bios':
partlabel_prefix = 'bios-boot-part-'
for number, holder in enumerate(holders):
label = utils.scan_partition_table_type(holder)
if label == 'gpt':
LOG.debug("Creating bios boot partition on disk holder %s",
holder)
out, _u = utils.execute('sgdisk', '-F', holder)
start_sector = '{}s'.format(out.splitlines()[-1].strip())
partlabel = '{}{}'.format(partlabel_prefix, number)
out, _u = utils.execute(
'sgdisk', '-n', '0:{}:+2MiB'.format(start_sector),
'-t', '0:ef02', '-c', '0:{}'.format(partlabel), holder)
# Q: MBR case, could we dd the boot code from the softraid
# (446 first bytes) if we detect a bootloader with
# _is_bootloader_loaded?
# A: This won't work. Because it includes the address on the
# disk, as in virtual disk, where to load the data from.
# Since there is a structural difference, this means it will
# fail.
# Just an empty list if not uefi boot mode, nvm, not used anyway
return efi_partitions
def _install_grub2(device, root_uuid, efi_system_part_uuid=None,
prep_boot_part_uuid=None, target_boot_mode='bios'):
"""Install GRUB2 bootloader on a given device."""
LOG.debug("Installing GRUB2 bootloader on device %s", device)
efi_partitions = None
efi_part = None
efi_partition_mount_point = None
efi_mounted = False
holders = None
# NOTE(TheJulia): Seems we need to get this before ever possibly
# restart the device in the case of multi-device RAID as pyudev
# doesn't exactly like the partition disappearing.
root_partition = _get_partition(device, uuid=root_uuid)
# If the root device is an md device (or partition), restart the device
# (to help grub finding it) and identify the underlying holder disks
# to install grub.
if hardware.is_md_device(device):
# If the root device is an md device (or partition),
# restart the device to help grub find it later on.
hardware.md_restart(device)
# If an md device, we need to rescan the devices anyway to pickup
# the md device partition.
_rescan_device(device)
elif (_is_bootloader_loaded(device)
and not (efi_system_part_uuid
or prep_boot_part_uuid)):
# We always need to put the bootloader in place with software raid
# so it is okay to elif into the skip doing a bootloader step.
LOG.info("Skipping installation of bootloader on device %s "
"as it is already marked bootable.", device)
return
try:
# Mount the partition and binds
path = tempfile.mkdtemp()
if efi_system_part_uuid:
efi_part = _get_partition(device, uuid=efi_system_part_uuid)
efi_partitions = [efi_part]
if hardware.is_md_device(device):
holders = hardware.get_holder_disks(device)
efi_partitions = _prepare_boot_partitions_for_softraid(
device, holders, efi_part, target_boot_mode
)
if efi_partitions:
efi_partition_mount_point = os.path.join(path, "boot/efi")
# For power we want to install grub directly onto the PreP partition
if prep_boot_part_uuid:
device = _get_partition(device, uuid=prep_boot_part_uuid)
# If the root device is an md device (or partition),
# identify the underlying holder disks to install grub.
if hardware.is_md_device(device):
disks = holders
else:
disks = [device]
utils.execute('mount', root_partition, path)
for fs in BIND_MOUNTS:
utils.execute('mount', '-o', 'bind', fs, path + fs)
utils.execute('mount', '-t', 'sysfs', 'none', path + '/sys')
binary_name = "grub"
if os.path.exists(os.path.join(path, 'usr/sbin/grub2-install')):
binary_name = "grub2"
# Add /bin to PATH variable as grub requires it to find efibootmgr
# when running in uefi boot mode.
# Add /usr/sbin to PATH variable to ensure it is there as we do
# not use full path to grub binary anymore.
path_variable = os.environ.get('PATH', '')
path_variable = '%s:/bin:/usr/sbin:/sbin' % path_variable
if efi_partitions:
if not os.path.exists(efi_partition_mount_point):
os.makedirs(efi_partition_mount_point)
LOG.info("GRUB2 will be installed for UEFI on efi partitions %s",
efi_partitions)
for efi_partition in efi_partitions:
utils.execute(
'mount', efi_partition, efi_partition_mount_point)
efi_mounted = True
# FIXME(rg): does not work in cross boot mode case (target
# boot mode differs from ramdisk one)
# Probe for the correct target (depends on the arch, example
# --target=x86_64-efi)
utils.execute('chroot %(path)s /bin/sh -c '
'"%(bin)s-install"' %
{'path': path, 'bin': binary_name},
shell=True,
env_variables={
'PATH': path_variable
})
# Also run grub-install with --removable, this installs grub to
# the EFI fallback path. Useful if the NVRAM wasn't written
# correctly, was reset or if testing with virt as libvirt
# resets the NVRAM on instance start.
# This operation is essentially a copy operation. Use of the
# --removable flag, per the grub-install source code changes
# the default file to be copied, destination file name, and
# prevents NVRAM from being updated.
# We only run grub2_install for uefi if we can't verify the
# uefi bits
utils.execute('chroot %(path)s /bin/sh -c '
'"%(bin)s-install --removable"' %
{'path': path, 'bin': binary_name},
shell=True,
env_variables={
'PATH': path_variable
})
utils.execute('umount', efi_partition_mount_point, attempts=3,
delay_on_retry=True)
efi_mounted = False
# NOTE: probably never needed for grub-mkconfig, does not hurt in
# case of doubt, cleaned in the finally clause anyway
utils.execute('mount', efi_partitions[0],
efi_partition_mount_point)
efi_mounted = True
else:
# FIXME(rg): does not work if ramdisk boot mode is not the same
# as the target (--target=i386-pc, arch dependent).
# See previous FIXME
# Install grub. Normally, grub goes to one disk only. In case of
# md devices, grub goes to all underlying holder (RAID-1) disks.
LOG.info("GRUB2 will be installed on disks %s", disks)
for grub_disk in disks:
LOG.debug("Installing GRUB2 on disk %s", grub_disk)
utils.execute(
'chroot %(path)s /bin/sh -c "%(bin)s-install %(dev)s"' %
{
'path': path,
'bin': binary_name,
'dev': grub_disk
},
shell=True,
env_variables={
'PATH': path_variable
}
)
LOG.debug("GRUB2 successfully installed on device %s",
grub_disk)
# If the image has dracut installed, set the rd.md.uuid kernel
# parameter for discovered md devices.
if hardware.is_md_device(device) and _has_dracut(path):
rd_md_uuids = ["rd.md.uuid=%s" % x['UUID']
for x in hardware.md_get_raid_devices().values()]
LOG.debug("Setting rd.md.uuid kernel parameters: %s", rd_md_uuids)
with open('%s/etc/default/grub' % path, 'r') as g:
contents = g.read()
with open('%s/etc/default/grub' % path, 'w') as g:
g.write(
re.sub(r'GRUB_CMDLINE_LINUX="(.*)"',
r'GRUB_CMDLINE_LINUX="\1 %s"'
% " ".join(rd_md_uuids),
contents))
# Generate the grub configuration file
utils.execute('chroot %(path)s /bin/sh -c '
'"%(bin)s-mkconfig -o '
'/boot/%(bin)s/grub.cfg"' %
{'path': path, 'bin': binary_name}, shell=True,
env_variables={'PATH': path_variable})
LOG.info("GRUB2 successfully installed on %s", device)
except processutils.ProcessExecutionError as e:
error_msg = ('Installing GRUB2 boot loader to device %(dev)s '
'failed with %(err)s.' % {'dev': device, 'err': e})
LOG.error(error_msg)
raise errors.CommandExecutionError(error_msg)
finally:
umount_warn_msg = "Unable to umount %(path)s. Error: %(error)s"
# Umount binds and partition
umount_binds_fail = False
# If umount fails for efi partition, then we cannot be sure that all
# the changes were written back to the filesystem.
try:
if efi_mounted:
utils.execute('umount', efi_partition_mount_point, attempts=3,
delay_on_retry=True)
except processutils.ProcessExecutionError as e:
error_msg = ('Umounting efi system partition failed. '
'Attempted 3 times. Error: %s' % e)
LOG.error(error_msg)
raise errors.CommandExecutionError(error_msg)
for fs in BIND_MOUNTS:
try:
utils.execute('umount', path + fs, attempts=3,
delay_on_retry=True)
except processutils.ProcessExecutionError as e:
umount_binds_fail = True
LOG.warning(umount_warn_msg, {'path': path + fs, 'error': e})
try:
utils.execute('umount', path + '/sys', attempts=3,
delay_on_retry=True)
except processutils.ProcessExecutionError as e:
umount_binds_fail = True
LOG.warning(umount_warn_msg, {'path': path + '/sys', 'error': e})
# If umounting the binds succeed then we can try to delete it
if not umount_binds_fail:
try:
utils.execute('umount', path, attempts=3, delay_on_retry=True)
except processutils.ProcessExecutionError as e:
LOG.warning(umount_warn_msg, {'path': path, 'error': e})
else:
# After everything is umounted we can then remove the
# temporary directory
shutil.rmtree(path)
class ImageExtension(base.BaseAgentExtension):
@base.async_command('install_bootloader')
def install_bootloader(self, root_uuid, efi_system_part_uuid=None,
prep_boot_part_uuid=None,
target_boot_mode='bios'):
"""Install the GRUB2 bootloader on the image.
:param root_uuid: The UUID of the root partition.
:param efi_system_part_uuid: The UUID of the efi system partition.
To be used only for uefi boot mode. For uefi boot mode, the
boot loader will be installed here.
:param prep_boot_part_uuid: The UUID of the PReP Boot partition.
Used only for booting ppc64* partition images locally. In this
scenario the bootloader will be installed here.
:param target_boot_mode: bios, uefi. Only taken into account
for softraid, when no efi partition is explicitely provided
(happens for whole disk images)
:raises: CommandExecutionError if the installation of the
bootloader fails.
:raises: DeviceNotFound if the root partition is not found.
"""
device = hardware.dispatch_to_managers('get_os_install_device')
iscsi.clean_up(device)
boot = hardware.dispatch_to_managers('get_boot_info')
# FIXME(arne_wiebalck): make software RAID work with efibootmgr
if (boot.current_boot_mode == 'uefi'
and not hardware.is_md_device(device)):
has_efibootmgr = True
try:
utils.execute('efibootmgr', '--version')
except FileNotFoundError:
LOG.warning("efibootmgr is not available in the ramdisk")
has_efibootmgr = False
if has_efibootmgr:
if _manage_uefi(device,
efi_system_part_uuid=efi_system_part_uuid):
return
# In case we can't use efibootmgr for uefi we will continue using grub2
LOG.debug('Using grub2-install to set up boot files')
_install_grub2(device,
root_uuid=root_uuid,
efi_system_part_uuid=efi_system_part_uuid,
prep_boot_part_uuid=prep_boot_part_uuid,
target_boot_mode=target_boot_mode)