Merge "Finish the guide on upgrading to hardware types"

This commit is contained in:
Zuul 2017-10-19 18:02:36 +00:00 committed by Gerrit Code Review
commit 50ed0b1f0f

View File

@ -10,34 +10,47 @@ Planning the upgrade
--------------------
It is necessary to figure out which hardware types and hardware interfaces
correspond to which classic drivers used in your deployment.
Use the following table:
correspond to which classic drivers used in your deployment. The following
table lists the classic drivers with their corresponding hardware types and
the boot, deploy, inspect, management, and power hardware interfaces:
================== ============= ==================== ============== ========== =========
Classic Driver Hardware Type Boot Deploy Management Power
================== ============= ==================== ============== ========== =========
pxe_ilo ilo ilo-pxe iscsi ilo ilo
agent_ilo ilo ilo-virtual-media direct ilo ilo
iscsi_ilo ilo ilo-virtual-media iscsi ilo ilo
pxe_ipmitool ipmi pxe iscsi ipmitool ipmitool
agent_ipmitool ipmi pxe direct ipmitool ipmitool
pxe_irmc irmc irmc-pxe iscsi irmc irmc
iscsi_irmc irmc irmc-virtual-media iscsi irmc irmc
agent_irmc irmc irmc-virtual-media direct irmc irmc
agent_pxe_oneview oneview pxe oneview-direct oneview oneview
iscsi_pxe_oneview oneview pxe oneview-iscsi oneview oneview
pxe_snmp snmp pxe iscsi fake snmp
================== ============= ==================== ============== ========== =========
.. TODO(dtantsur): finish this table
.. warning::
This table does not currently cover hardware interfaces other than
boot, deploy, management and power.
===================== ==================== ==================== ============== ========== ========== =========
Classic Driver Hardware Type Boot Deploy Inspect Management Power
===================== ==================== ==================== ============== ========== ========== =========
agent_ilo ilo ilo-virtual-media direct ilo ilo ilo
agent_ipmitool ipmi pxe direct inspector ipmitool ipmitool
agent_ipmitool_socat ipmi pxe direct inspector ipmitool ipmitool
agent_irmc irmc irmc-virtual-media direct irmc irmc irmc
agent_pxe_oneview oneview pxe oneview-direct oneview oneview oneview
agent_ucs cisco-ucs-managed pxe direct inspector ucsm ucsm
iscsi_ilo ilo ilo-virtual-media iscsi ilo ilo ilo
iscsi_irmc irmc irmc-virtual-media iscsi irmc irmc irmc
iscsi_pxe_oneview oneview pxe oneview-iscsi oneview oneview oneview
pxe_agent_cimc cisco-ucs-standalone pxe direct inspector cimc cimc
pxe_drac idrac pxe iscsi idrac idrac idrac
pxe_drac_inspector idrac pxe iscsi inspector idrac idrac
pxe_ilo ilo ilo-pxe iscsi ilo ilo ilo
pxe_ipmitool ipmi pxe iscsi inspector ipmitool ipmitool
pxe_ipmitool_socat ipmi pxe iscsi inspector ipmitool ipmitool
pxe_iscsi_cimc cisco-ucs-standalone pxe iscsi inspector cimc cimc
pxe_irmc irmc irmc-pxe iscsi irmc irmc irmc
pxe_snmp snmp pxe iscsi no-inspect fake snmp
pxe_ucs cisco-ucs-managed pxe iscsi inspector ucsm ucsm
===================== ==================== ==================== ============== ========== ========== =========
.. note::
For out-of-tree drivers you may need to reach out to their maintainers or
figure out the appropriate interfaces by researching the source code.
The ``inspector`` *inspect* interface was only used if
explicitly enabled in the configuration. Otherwise, ``no-inspect``
was used.
.. note::
``pxe_ipmitool_socat`` and ``agent_ipmitool_socat`` use
``ipmitool-socat`` *console* interface (the default for the ``ipmi``
hardware type), while ``pxe_ipmitool`` and ``agent_ipmitool`` use
``ipmitool-shellinabox``. See Console_ for details.
For out-of-tree drivers you may need to reach out to their maintainers or
figure out the appropriate interfaces by researching the source code.
Configuration
-------------