# Copyright 2016 Intel Corporation
# Copyright 2015 FUJITSU LIMITED
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.

from oslo_config import cfg

from ironic.common.i18n import _

opts = [
    cfg.StrOpt('remote_image_share_root',
               default='/remote_image_share_root',
               help=_('Ironic conductor node\'s "NFS" or "CIFS" root path')),
    cfg.StrOpt('remote_image_server',
               help=_('IP of remote image server')),
    cfg.StrOpt('remote_image_share_type',
               default='CIFS',
               choices=[('CIFS', _('CIFS (Common Internet File System) '
                                   'protocol')),
                        ('NFS', _('NFS (Network File System) protocol'))],
               ignore_case=True,
               help=_('Share type of virtual media')),
    cfg.StrOpt('remote_image_share_name',
               default='share',
               help=_('share name of remote_image_server')),
    cfg.StrOpt('remote_image_user_name',
               help=_('User name of remote_image_server')),
    cfg.StrOpt('remote_image_user_password', secret=True,
               help=_('Password of remote_image_user_name')),
    cfg.StrOpt('remote_image_user_domain',
               default='',
               help=_('Domain name of remote_image_user_name')),
    cfg.PortOpt('port',
                default=443,
                choices=[(443, _('port 443')),
                         (80, _('port 80'))],
                help=_('Port to be used for iRMC operations')),
    cfg.StrOpt('auth_method',
               default='basic',
               choices=[('basic', _('Basic authentication')),
                        ('digest', _('Digest authentication'))],
               help=_('Authentication method to be used for iRMC '
                      'operations')),
    cfg.IntOpt('client_timeout',
               default=60,
               help=_('Timeout (in seconds) for iRMC operations')),
    cfg.StrOpt('sensor_method',
               default='ipmitool',
               choices=[('ipmitool', _('IPMItool')),
                        ('scci', _('Fujitsu SCCI (ServerView Common Command '
                                   'Interface)'))],
               help=_('Sensor data retrieval method.')),
    cfg.StrOpt('snmp_version',
               default='v2c',
               choices=[('v1', _('SNMPv1')),
                        ('v2c', _('SNMPv2c')),
                        ('v3', _('SNMPv3'))],
               help=_('SNMP protocol version')),
    cfg.PortOpt('snmp_port',
                default=161,
                help=_('SNMP port')),
    cfg.StrOpt('snmp_community',
               default='public',
               help=_('SNMP community. Required for versions "v1" and "v2c"')),
    cfg.StrOpt('snmp_security',
               help=_("SNMP security name. Required for version 'v3'."),
               deprecated_for_removal=True,
               deprecated_reason=_("Use irmc_snmp_user")),
    cfg.IntOpt('snmp_polling_interval',
               default=10,
               help='SNMP polling interval in seconds'),
    cfg.StrOpt('snmp_auth_proto',
               default='sha',
               choices=[('sha', _('Secure Hash Algorithm 1, supported in iRMC '
                         'S4 and S5.')),
                        ('sha256', ('Secure Hash Algorithm 2 with 256 bits '
                                    'digest, only supported in iRMC S6.')),
                        ('sha384', ('Secure Hash Algorithm 2 with 384 bits '
                                    'digest, only supported in iRMC S6.')),
                        ('sha512', ('Secure Hash Algorithm 2 with 512 bits '
                                    'digest, only supported in iRMC S6.'))],
               help=_("SNMPv3 message authentication protocol ID. "
                      "Required for version 'v3'. The valid options are "
                      "'sha', 'sha256', 'sha384' and 'sha512', while 'sha' is "
                      "the only supported protocol in iRMC S4 and S5, and "
                      "from iRMC S6, 'sha256', 'sha384' and 'sha512' are "
                      "supported, but 'sha' is not supported any more.")),
    cfg.StrOpt('snmp_priv_proto',
               default='aes',
               choices=[('aes', _('Advanced Encryption Standard'))],
               help=_("SNMPv3 message privacy (encryption) protocol ID. "
                      "Required for version 'v3'. 'aes' is supported.")),
    cfg.IntOpt('clean_priority_restore_irmc_bios_config',
               default=0,
               help=_('Priority for restore_irmc_bios_config clean step.')),
    cfg.ListOpt('gpu_ids',
                default=[],
                help=_('List of vendor IDs and device IDs for GPU device to '
                       'inspect. List items are in format vendorID/deviceID '
                       'and separated by commas. GPU inspection will use this '
                       'value to count the number of GPU device in a node. If '
                       'this option is not defined, then leave out '
                       'pci_gpu_devices in capabilities property. '
                       'Sample gpu_ids value: 0x1000/0x0079,0x2100/0x0080')),
    cfg.ListOpt('fpga_ids',
                default=[],
                help=_('List of vendor IDs and device IDs for CPU FPGA to '
                       'inspect. List items are in format vendorID/deviceID '
                       'and separated by commas. CPU inspection will use this '
                       'value to find existence of CPU FPGA in a node. If '
                       'this option is not defined, then leave out '
                       'CUSTOM_CPU_FPGA in node traits. '
                       'Sample fpga_ids value: 0x1000/0x0079,0x2100/0x0080')),
    cfg.IntOpt('query_raid_config_fgi_status_interval',
               min=1,
               default=300,
               help=_('Interval (in seconds) between periodic RAID status '
                      'checks to determine whether the asynchronous RAID '
                      'configuration was successfully finished or not. '
                      'Foreground Initialization (FGI) will start 5 minutes '
                      'after creating virtual drives.')),
    cfg.StrOpt('kernel_append_params',
               # TODO(dtantsur): set to the same value as in [pxe] after Xena
               default=None,
               mutable=True,
               help=_('Additional kernel parameters to pass down to the '
                      'instance kernel. These parameters can be consumed by '
                      'the kernel or by the applications by reading '
                      '/proc/cmdline. Mind severe cmdline size limit! Can be '
                      'overridden by `instance_info/kernel_append_params` '
                      'property.')),
]


def register_opts(conf):
    conf.register_opts(opts, group='irmc')