.. _states: ====================== Ironic's State Machine ====================== State Machine Diagram ===================== The diagram below shows the provisioning states that an Ironic node goes through during the lifetime of a node. The diagram also depicts the events that transition the node to different states. Stable states are highlighted with a thicker border. All transitions from stable states are initiated by API requests. There are a few other API-initiated-transitions that are possible from non-stable states. The events for these API-initiated transitions are indicated with '(via API)'. Internally, the conductor initiates the other transitions (depicted in gray). .. figure:: ../images/states.svg :width: 660px :align: left :alt: Ironic state transitions State Descriptions ================== enroll (stable state) This is the state that all nodes start off in when created using API version 1.11 or newer. When a node is in the ``enroll`` state, the only thing ironic knows about it is that it exists, and ironic cannot take any further action by itself. Once a node has its driver/interfaces and their required information set in ``node.driver_info``, the node can be transitioned to the ``verifying`` state by setting the node's provision state using the ``manage`` verb. verifying ironic will validate that it can manage the node using the information given in ``node.driver_info`` and with either the driver/hardware type and interfaces it has been assigned. This involves going out and confirming that the credentials work to access whatever node control mechanism they talk to. manageable (stable state) Once ironic has verified that it can manage the node using the driver/interfaces and credentials passed in at node create time, the node will be transitioned to the ``manageable`` state. From ``manageable``, nodes can transition to: * ``manageable`` (through ``cleaning``) by setting the node's provision state using the ``clean`` verb. * ``manageable`` (through ``inspecting``) by setting the node's provision state using the ``inspect`` verb. * ``available`` (through ``cleaning`` if automatic cleaning is enabled) by setting the node's provision state using the ``provide`` verb. * ``active`` (through ``adopting``) by setting the node's provision state using the ``adopt`` verb. ``manageable`` is the state that a node should be moved into when any updates need to be made to it such as changes to fields in driver_info and updates to networking information on ironic ports assigned to the node. ``manageable`` is also the only stable state that can be transitioned to, from these failure states: * ``adopt failed`` * ``clean failed`` * ``inspect failed`` inspecting ``inspecting`` will utilize node introspection to update hardware-derived node properties to reflect the current state of the hardware. If introspection fails, the node will transition to ``inspect failed``. inspect failed This is the state a node will move into when inspection of the node fails. From here the node can transitioned to: * ``inspecting`` by setting the node's provision state using the ``inspect`` verb. * ``manageable`` by setting the node's provision state using the ``manage`` verb cleaning Nodes in the ``cleaning`` state are being scrubbed and reprogrammed into a known configuration. When a node is in the ``cleaning`` state it means that the conductor is executing the clean step (for out-of-band clean steps) or preparing the environment (building PXE configuration files, configuring the DHCP, etc) to boot the ramdisk for running in-band clean steps. clean wait Just like the ``cleaning`` state, the nodes in the ``clean wait`` state are being scrubbed and reprogrammed. The difference is that in the ``clean wait`` state the conductor is waiting for the ramdisk to boot or the clean step which is running in-band to finish. The cleaning process of a node in the ``clean wait`` state can be interrupted by setting the node's provision state using the ``abort`` verb if the task that is running allows it. available (stable state) After nodes have been successfully preconfigured and cleaned, they are moved into the ``available`` state and are ready to be provisioned. From ``available``, nodes can transition to: * ``active`` (through ``deploying``) by setting the node's provision state using the ``active`` verb. * ``manageable`` by setting the node's provision state using the ``manage`` verb deploying Nodes in ``deploying`` are being prepared to run a workload on them. This consists of running a series of tasks, such as: * Setting appropriate BIOS configurations * Partitioning drives and laying down file systems. * Creating any additional resources (node-specific network config, a config drive partition, etc.) that may be required by additional subsystems. wait call-back Just like the ``deploying`` state, the nodes in ``wait call-back`` are being deployed. The difference is that in ``wait call-back`` the conductor is waiting for the ramdisk to boot or execute parts of the deployment which need to run in-band on the node (for example, installing the bootloader, or writing the image to the disk). The deployment of a node in ``wait call-back`` can be interrupted by setting the node's provision state using the ``deleted`` verb. deploy failed This is the state a node will move into when a deployment fails, for example a timeout waiting for the ramdisk to PXE boot. From here the node can be transitioned to: * ``active`` (through ``deploying``) by setting the node's provision state using either the ``active`` or ``rebuild`` verbs. * ``available`` (through ``deleting`` and ``cleaning``) by setting the node's provision state using the ``deleted`` verb. active (stable state) Nodes in ``active`` have a workload running on them. ironic may collect out-of-band sensor information (including power state) on a regular basis. Nodes in ``active`` can transition to: * ``available`` (through ``deleting`` and ``cleaning``) by setting the node's provision state using the ``deleted`` verb. * ``active`` (through ``deploying``) by setting the node's provision state using the ``rebuild`` verb. deleting Nodes in ``deleting`` state are being torn down from running an active workload. In ``deleting``, ironic tears down and removes any configuration and resources it added in ``deploying``. error (stable state) This is the state a node will move into when deleting an active deployment fails. From ``error``, nodes can transition to: * ``available`` (through ``deleting`` and ``cleaning``) by setting the node's provision state using the ``deleted`` verb. adopting This state allows ironic to take over management of a baremetal node with an existing workload on it. Ordinarily when a baremetal node is enrolled and managed by ironic, it must transition through ``cleaning`` and ``deploying`` to reach ``active`` state. However, those baremetal nodes that have an existing workload on them, do not need to be deployed or cleaned again, so this transition allows these nodes to move directly from ``manageable`` to ``active``.