======================== REST API Version History ======================== 1.50 (Stein, master) -------------------- Added ``owner`` field to the node object to enable operators to store information in relation to the owner of a node. The field is up to 255 characters and MAY be used in a later point in time to allow designation and deligation of permissions. 1.49 (Stein, master) -------------------- Added new endpoints for retrieving conductors information, and added a ``conductor`` field to node object. 1.48 (Stein, master) -------------------- Added ``protected`` field to the node object to allow protecting deployed nodes from undeploying, rebuilding or deletion. Also added ``protected_reason`` to specify the reason of making the node protected. 1.47 (Stein, master) -------------------- Added ``automated_clean`` field to the node object, enabling cleaning per node. 1.46 (Rocky, 11.1.0) -------------------- Added ``conductor_group`` field to the node and the node response, as well as support to the API to return results by matching the parameter. 1.45 (Rocky, 11.1.0) -------------------- Added ``reset_interfaces`` parameter to node's PATCH request, to specify whether to reset hardware interfaces to their defaults on driver's update. 1.44 (Rocky, 11.1.0) -------------------- Added ``deploy_step`` to the node object, to indicate the current deploy step (if any) being performed on the node. 1.43 (Rocky, 11.0.0) -------------------- Added ``?detail=`` boolean query to the API list endpoints to provide a more RESTful alternative to the existing ``/nodes/detail`` and similar endpoints. 1.42 (Rocky, 11.0.0) -------------------- Added ``fault`` to the node object, to indicate currently detected fault on the node. 1.41 (Rocky, 11.0.0) -------------------- Added support to abort inspection of a node in the ``inspect wait`` state. 1.40 (Rocky, 11.0.0) -------------------- Added BIOS properties as sub resources of nodes: * GET /v1/nodes//bios * GET /v1/nodes//bios/ Added ``bios_interface`` field to the node object to allow getting and setting the interface. 1.39 (Rocky, 11.0.0) -------------------- Added ``inspect wait`` to available provision states. A node is shown as ``inspect wait`` instead of ``inspecting`` during asynchronous inspection. 1.38 (Queens, 10.1.0) --------------------- Added provision_state verbs ``rescue`` and ``unrescue`` along with the following states: ``rescue``, ``rescue failed``, ``rescue wait``, ``rescuing``, ``unrescue failed``, and ``unrescuing``. After rescuing a node, it will be left in the ``rescue`` state running a rescue ramdisk, configured with the ``rescue_password``, and listening with ssh on the specified network interfaces. Unrescuing a node will return it to ``active``. Added ``rescue_interface`` to the node object, to allow setting the rescue interface for a dynamic driver. 1.37 (Queens, 10.1.0) --------------------- Adds support for node traits, with the following new endpoints. * GET /v1/nodes//traits lists the traits for a node. * PUT /v1/nodes//traits sets all traits for a node. * PUT /v1/nodes//traits/ adds a trait to a node. * DELETE /v1/nodes//traits removes all traits from a node. * DELETE /v1/nodes//traits/ removes a trait from a node. A node's traits are also included the following node query and list responses: * GET /v1/nodes/ * GET /v1/nodes/detail * GET /v1/nodes?fields=traits Traits cannot be specified on node creation, nor can they be updated via a PATCH request on the node. 1.36 (Queens, 10.0.0) --------------------- Added ``agent_version`` parameter to deploy heartbeat request for version negotiation with Ironic Python Agent features. 1.35 (Queens, 9.2.0) -------------------- Added ability to provide ``configdrive`` when node is updated to ``rebuild`` provision state. 1.34 (Pike, 9.0.0) ------------------ Adds a ``physical_network`` field to the port object. All ports in a portgroup must have the same value in their ``physical_network`` field. 1.33 (Pike, 9.0.0) ------------------ Added ``storage_interface`` field to the node object to allow getting and setting the interface. Added ``default_storage_interface`` and ``enabled_storage_interfaces`` fields to the driver object to show the information. 1.32 (Pike, 9.0.0) ------------------ Added new endpoints for remote volume configuration: * GET /v1/volume as a root for volume resources * GET /v1/volume/connectors for listing volume connectors * POST /v1/volume/connectors for creating a volume connector * GET /v1/volume/connectors/ for showing a volume connector * PATCH /v1/volume/connectors/ for updating a volume connector * DELETE /v1/volume/connectors/ for deleting a volume connector * GET /v1/volume/targets for listing volume targets * POST /v1/volume/targets for creating a volume target * GET /v1/volume/targets/ for showing a volume target * PATCH /v1/volume/targets/ for updating a volume target * DELETE /v1/volume/targets/ for deleting a volume target Volume resources also can be listed as sub resources of nodes: * GET /v1/nodes//volume * GET /v1/nodes//volume/connectors * GET /v1/nodes//volume/targets 1.31 (Ocata, 7.0.0) ------------------- Added the following fields to the node object, to allow getting and setting interfaces for a dynamic driver: * boot_interface * console_interface * deploy_interface * inspect_interface * management_interface * power_interface * raid_interface * vendor_interface 1.30 (Ocata, 7.0.0) ------------------- Added dynamic driver APIs: * GET /v1/drivers now accepts a ``type`` parameter (optional, one of ``classic`` or ``dynamic``), to limit the result to only classic drivers or dynamic drivers (hardware types). Without this parameter, both classic and dynamic drivers are returned. * GET /v1/drivers now accepts a ``detail`` parameter (optional, one of ``True`` or ``False``), to show all fields for a driver. Defaults to ``False``. * GET /v1/drivers now returns an additional ``type`` field to show if the driver is classic or dynamic. * GET /v1/drivers/ now returns an additional ``type`` field to show if the driver is classic or dynamic. * GET /v1/drivers/ now returns additional fields that are null for classic drivers, and set as following for dynamic drivers: * The value of the default__interface is the entrypoint name of the calculated default interface for that type: * default_boot_interface * default_console_interface * default_deploy_interface * default_inspect_interface * default_management_interface * default_network_interface * default_power_interface * default_raid_interface * default_vendor_interface * The value of the enabled__interfaces is a list of entrypoint names of the enabled interfaces for that type: * enabled_boot_interfaces * enabled_console_interfaces * enabled_deploy_interfaces * enabled_inspect_interfaces * enabled_management_interfaces * enabled_network_interfaces * enabled_power_interfaces * enabled_raid_interfaces * enabled_vendor_interfaces 1.29 (Ocata, 7.0.0) ------------------- Add a new management API to support inject NMI, 'PUT /v1/nodes/(node_ident)/management/inject_nmi'. 1.28 (Ocata, 7.0.0) ------------------- Add '/v1/nodes//vifs' endpoint for attach, detach and list of VIFs. 1.27 (Ocata, 7.0.0) ------------------- Add ``soft rebooting`` and ``soft power off`` as possible values for the ``target`` field of the power state change payload, and also add ``timeout`` field to it. 1.26 (Ocata, 7.0.0) ------------------- Add portgroup ``mode`` and ``properties`` fields. 1.25 (Ocata, 7.0.0) ------------------- Add possibility to unset chassis_uuid from a node. 1.24 (Ocata, 7.0.0) ------------------- Added new endpoints '/v1/nodes//portgroups' and '/v1/portgroups//ports'. Added new field ``port.portgroup_uuid``. 1.23 (Ocata, 7.0.0) ------------------- Added '/v1/portgroups/ endpoint. 1.22 (Newton, 6.1.0) -------------------- Added endpoints for deployment ramdisks. 1.21 (Newton, 6.1.0) -------------------- Add node ``resource_class`` field. 1.20 (Newton, 6.1.0) -------------------- Add node ``network_interface`` field. 1.19 (Newton, 6.1.0) -------------------- Add ``local_link_connection`` and ``pxe_enabled`` fields to the port object. 1.18 (Newton, 6.1.0) -------------------- Add ``internal_info`` readonly field to the port object, that will be used by ironic to store internal port-related information. 1.17 (Newton, 6.0.0) -------------------- Addition of provision_state verb ``adopt`` which allows an operator to move a node from ``manageable`` state to ``active`` state without performing a deployment operation on the node. This is intended for nodes that have already been deployed by external means. 1.16 (Mitaka, 5.0.0) -------------------- Add ability to filter nodes by driver. 1.15 (Mitaka, 5.0.0) -------------------- Add ability to do manual cleaning when a node is in the manageable provision state via PUT v1/nodes//states/provision, target:clean, clean_steps:[...]. 1.14 (Liberty, 4.2.0) --------------------- Make the following endpoints discoverable via Ironic API: * '/v1/nodes//states' * '/v1/drivers//properties' 1.13 (Liberty, 4.2.0) --------------------- Add a new verb ``abort`` to the API used to abort nodes in ``CLEANWAIT`` state. 1.12 (Liberty, 4.2.0) --------------------- This API version adds the following abilities: * Get/set ``node.target_raid_config`` and to get ``node.raid_config``. * Retrieve the logical disk properties for the driver. 1.11 (Liberty, 4.0.0, breaking change) -------------------------------------- Newly registered nodes begin in the ``enroll`` provision state by default, instead of ``available``. To get them to the ``available`` state, the ``manage`` action must first be run to verify basic hardware control. On success the node moves to ``manageable`` provision state. Then the ``provide`` action must be run. Automated cleaning of the node is done and the node is made ``available``. 1.10 (Liberty, 4.0.0) --------------------- Logical node names support all RFC 3986 unreserved characters. Previously only valid fully qualified domain names could be used. 1.9 (Liberty, 4.0.0) -------------------- Add ability to filter nodes by provision state. 1.8 (Liberty, 4.0.0) -------------------- Add ability to return a subset of resource fields. 1.7 (Liberty, 4.0.0) -------------------- Add node ``clean_step`` field. 1.6 (Kilo) ---------- Add :ref:`inspection` process: introduce ``inspecting`` and ``inspectfail`` provision states, and ``inspect`` action that can be used when a node is in ``manageable`` provision state. 1.5 (Kilo) ---------- Add logical node names that can be used to address a node in addition to the node UUID. Name is expected to be a valid `fully qualified domain name`_ in this version of API. 1.4 (Kilo) ---------- Add ``manageable`` state and ``manage`` transition, which can be used to move a node to ``manageable`` state from ``available``. The node cannot be deployed in ``manageable`` state. This change is mostly a preparation for future inspection work and introduction of ``enroll`` provision state. 1.3 (Kilo) ---------- Add node ``driver_internal_info`` field. 1.2 (Kilo, breaking change) --------------------------- Renamed NOSTATE (``None`` in Python, ``null`` in JSON) node state to ``available``. This is needed to reduce confusion around ``None`` state, especially when future additions to the state machine land. 1.1 (Kilo) ---------- This was the initial version when API versioning was introduced. Includes the following changes from Kilo release cycle: * Add node ``maintenance_reason`` field and an API endpoint to set/unset the node maintenance mode. * Add sync and async support for vendor passthru methods. * Vendor passthru endpoints support different HTTP methods, not only ``POST``. * Make vendor methods discoverable via the Ironic API. * Add logic to store the config drive passed by Nova. This has been the minimum supported version since versioning was introduced. 1.0 (Juno) ---------- This version denotes Juno API and was never explicitly supported, as API versioning was not implemented in Juno, and 1.1 became the minimum supported version in Kilo. .. _fully qualified domain name: https://en.wikipedia.org/wiki/Fully_qualified_domain_name