Change-Id: I6c3028ca88ca18406cc8f9f4739fd92360e72f9d
28 KiB
Developer Quick-Start
This is a quick walkthrough to get you started developing code for Ironic. This assumes you are already familiar with submitting code reviews to an OpenStack project.
The gate currently runs the unit tests under Python 2.7, Python 3.4 and Python 3.5. It is strongly encouraged to run the unit tests locally prior to submitting a patch.
Note
Do not run unit tests on the same environment as devstack due to conflicting configuration with system dependencies.
Note
This document is compatible with Python (3.5), Ubuntu (16.04) and Fedora (23). When referring to different versions of Python and OS distributions, this is explicitly stated.
Prepare Development System
System Prerequisites
The following packages cover the prerequisites for a local development environment on most current distributions. Instructions for getting set up with non-default versions of Python and on older distributions are included below as well.
Ubuntu/Debian:
sudo apt-get install build-essential python-dev libssl-dev python-pip libmysqlclient-dev libxml2-dev libxslt-dev libpq-dev git git-review libffi-dev gettext ipmitool psmisc graphviz libjpeg-dev
Fedora 21/RHEL7/CentOS7:
sudo yum install python-devel openssl-devel python-pip mysql-devel libxml2-devel libxslt-devel postgresql-devel git git-review libffi-devel gettext ipmitool psmisc graphviz gcc libjpeg-turbo-devel
If using RHEL and yum reports "No package python-pip available" and "No package git-review available", use the EPEL software repository. Instructions can be found at https://fedoraproject.org/wiki/EPEL/FAQ#howtouse.
Fedora 22 or higher:
sudo dnf install python-devel openssl-devel python-pip mysql-devel libxml2-devel libxslt-devel postgresql-devel git git-review libffi-devel gettext ipmitool psmisc graphviz gcc libjpeg-turbo-devel
Additionally, if using Fedora 23,
redhat-rpm-config
package should be installed so that development virtualenv can be built successfully.openSUSE/SLE 12:
sudo zypper install git git-review libffi-devel libmysqlclient-devel libopenssl-devel libxml2-devel libxslt-devel postgresql-devel python-devel python-nose python-pip gettext-runtime psmisc
Graphviz is only needed for generating the state machine diagram. To install it on openSUSE or SLE 12, see https://software.opensuse.org/download.html?project=graphics&package=graphviz-plugins.
(Optional) Installing Py34 requirements
If you need Python 3.4, follow the instructions above to install prerequisites and additionally install the following packages:
On Ubuntu 14.x/Debian:
sudo apt-get install python3-dev
On Ubuntu 16.04:
wget https://www.python.org/ftp/python/3.4.4/Python-3.4.4.tgz sudo tar xzf Python-3.4.4.tgz cd Python-3.4.4 sudo ./configure sudo make altinstall # This will install Python 3.4 without replacing 3.5. To check if 3.4 was installed properly run this command: python3.4 -V
On Fedora 21/RHEL7/CentOS7:
sudo yum install python3-devel
On Fedora 22 and higher:
sudo dnf install python3-devel
(Optional) Installing Py35 requirements
If you need Python 3.5 support on an older distro that does not already have it, follow the instructions for installing prerequisites above and additionally run the following commands.
On Ubuntu 14.04:
wget https://www.python.org/ftp/python/3.5.2/Python-3.5.2.tgz sudo tar xzf Python-3.5.2.tgz cd Python-3.5.2 sudo ./configure sudo make altinstall # This will install Python 3.5 without replacing 3.4. To check if 3.5 was installed properly run this command: python3.5 -V
On Fedora 23:
sudo dnf install -y dnf-plugins-core sudo dnf copr enable -y mstuchli/Python3.5 dnf install -y python35-python3
Python Prerequisites
If your distro has at least tox 1.8, use similar command to install
python-tox
package. Otherwise install this on all
distros:
sudo pip install -U tox
You may need to explicitly upgrade virtualenv if you've installed the one from your OS distribution and it is too old (tox will complain). You can upgrade it individually, if you need to:
sudo pip install -U virtualenv
Running Unit Tests Locally
If you haven't already, Ironic source code should be pulled directly from git:
# from your home or source directory
cd ~
git clone https://git.openstack.org/openstack/ironic
cd ironic
Running Unit and Style Tests
All unit tests should be run using tox. To run Ironic's entire test suite:
# to run the py27, py34, py35 unit tests, and the style tests
tox
To run a specific test or tests, use the "-e" option followed by the tox target name. For example:
# run the unit tests under py27 and also run the pep8 tests
tox -epy27 -epep8
Note
If tests are run under py27 and then run under py34 or py35 the following error may occur:
db type could not be determined ERROR: InvocationError: '/home/ubuntu/ironic/.tox/py35/bin/ostestr'
To overcome this error remove the file .testrepository/times.dbm and then run the py34 or py35 test.
You may pass options to the test programs using positional arguments. To run a specific unit test, this passes the -r option and desired test (regex string) to os-testr:
# run a specific test for Python 2.7
tox -epy27 -- -r test_conductor
Debugging unit tests
In order to break into the debugger from a unit test we need to insert a breaking point to the code:
import pdb; pdb.set_trace()
Then run tox
with the debug environment as one of the
following:
tox -e debug
tox -e debug test_file_name
tox -e debug test_file_name.TestClass
tox -e debug test_file_name.TestClass.test_name
For more information see the oslotest documentation.
Additional Tox Targets
There are several additional tox targets not included in the default
list, such as the target which builds the documentation site. See the
tox.ini
file for a complete listing of tox targets. These
can be run directly by specifying the target name:
# generate the documentation pages locally
tox -edocs
# generate the sample configuration file
tox -egenconfig
Exercising the Services Locally
In addition to running automated tests, sometimes it can be helpful to actually run the services locally, without needing a server in a remote datacenter.
If you would like to exercise the Ironic services in isolation within your local environment, you can do this without starting any other OpenStack services. For example, this is useful for rapidly prototyping and debugging interactions over the RPC channel, testing database migrations, and so forth.
Here we describe two ways to install and configure the dependencies, either run directly on your local machine or encapsulated in a virtual machine or container.
Step 1: Create a Python virtualenv
If you haven't already downloaded the source code, do that first:
cd ~ git clone https://git.openstack.org/openstack/ironic cd ironic
Create the Python virtualenv:
tox -evenv --notest --develop -r
Activate the virtual environment:
source .tox/venv/bin/activate
Install the ironic client:
pip install python-ironicclient
Note
You can install python-ironicclient from source by cloning the git repository and running pip install . while in the root of the cloned repository.
Export some ENV vars so the client will connect to the local services that you'll start in the next section:
export OS_AUTH_TOKEN=fake-token export IRONIC_URL=http://localhost:6385/
Next, install and configure system dependencies. Two different approaches are described below; you should only do one of these.
Step 2a: System Dependencies In A Virtual Machine
This option requires virtualbox, vagrant, and ansible. You may install these using your favorite package manager, or by downloading from the provided links.
Let vagrant do the work:
vagrant up
This will create a VM available to your local system at 192.168.99.11, will install all the necessary service dependencies, and configure some default users. It will also generate ./etc/ironic/ironic.conf.local preconfigured for local dev work. We recommend you compare and familiarize yourself with the settings in ./etc/ironic/ironic.conf.sample so you can adjust it to meet your own needs.
Step 2b: Install System Dependencies Locally
This option will install RabbitMQ and MySQL on your local system. This may not be desirable in some situations (eg, you're developing from a laptop and do not want to run a MySQL server on it all the time).
Install rabbitmq-server:
# install rabbit message broker # Ubuntu/Debian: sudo apt-get install rabbitmq-server # Fedora 21/RHEL7/CentOS7: sudo yum install rabbitmq-server sudo systemctl start rabbitmq-server.service # Fedora 22 or higher: sudo dnf install rabbitmq-server sudo systemctl start rabbitmq-server.service # openSUSE/SLE 12: sudo zypper install rabbitmq-server sudo systemctl start rabbitmq-server.service
Install mysql-server:
# Ubuntu/Debian: # sudo apt-get install mysql-server # Fedora 21/RHEL7/CentOS7: # sudo yum install mariadb mariadb-server # sudo systemctl start mariadb.service # Fedora 22 or higher: # sudo dnf install mariadb mariadb-server # sudo systemctl start mariadb.service # openSUSE/SLE 12: # sudo zypper install mariadb # sudo systemctl start mysql.service # If using MySQL, you need to create the initial database mysql -u root -pMYSQL_ROOT_PWD -e "create schema ironic"
Note
if you choose not to install mysql-server, ironic will default to using a local sqlite database.
Create a configuration file within the ironic source directory:
# copy sample config and modify it as necessary cp etc/ironic/ironic.conf.sample etc/ironic/ironic.conf.local # disable auth since we are not running keystone here sed -i "s/#auth_strategy = keystone/auth_strategy = noauth/" etc/ironic/ironic.conf.local # Use the 'fake_ipmitool' test driver sed -i "s/#enabled_drivers = pxe_ipmitool/enabled_drivers = fake_ipmitool/" etc/ironic/ironic.conf.local # set a fake host name [useful if you want to test multiple services on the same host] sed -i "s/#host = .*/host = test-host/" etc/ironic/ironic.conf.local # turn off the periodic sync_power_state task, to avoid getting NodeLocked exceptions sed -i "s/#sync_power_state_interval = 60/sync_power_state_interval = -1/" etc/ironic/ironic.conf.local # if you opted to install mysql-server, switch the DB connection from sqlite to mysql sed -i "s/#connection = .*/connection = mysql\+pymysql:\/\/root:MYSQL_ROOT_PWD@localhost\/ironic/" etc/ironic/ironic.conf.local
Step 3: Start the Services
From within the python virtualenv, run the following command to prepare the database before you start the ironic services:
# initialize the database for ironic
ironic-dbsync --config-file etc/ironic/ironic.conf.local create_schema
Next, open two new terminals for this section, and run each of the examples here in a separate terminal. In this way, the services will not be run as daemons; you can observe their output and stop them with Ctrl-C at any time.
Start the API service in debug mode and watch its output:
cd ~/ironic source .tox/venv/bin/activate ironic-api -v -d --config-file etc/ironic/ironic.conf.local
Start the Conductor service in debug mode and watch its output:
cd ~/ironic source .tox/venv/bin/activate ironic-conductor -v -d --config-file etc/ironic/ironic.conf.local
Step 4: Interact with the running services
You should now be able to interact with ironic via the python client, which is present in the python virtualenv, and observe both services' debug outputs in the other two windows. This is a good way to test new features or play with the functionality without necessarily starting DevStack.
To get started, list the available commands and resources:
# get a list of available commands
ironic help
# get the list of drivers currently supported by the available conductor(s)
ironic driver-list
# get a list of nodes (should be empty at this point)
ironic node-list
Here is an example walkthrough of creating a node:
MAC="aa:bb:cc:dd:ee:ff" # replace with the MAC of a data port on your node
IPMI_ADDR="1.2.3.4" # replace with a real IP of the node BMC
IPMI_USER="admin" # replace with the BMC's user name
IPMI_PASS="pass" # replace with the BMC's password
# enroll the node with the "fake" deploy driver and the "ipmitool" power driver
# Note that driver info may be added at node creation time with "-i"
NODE=$(ironic node-create -d fake_ipmitool -i ipmi_address=$IPMI_ADDR -i ipmi_username=$IPMI_USER | grep ' uuid ' | awk '{print $4}')
# driver info may also be added or updated later on
ironic node-update $NODE add driver_info/ipmi_password=$IPMI_PASS
# add a network port
ironic port-create -n $NODE -a $MAC
# view the information for the node
ironic node-show $NODE
# request that the node's driver validate the supplied information
ironic node-validate $NODE
# you have now enrolled a node sufficiently to be able to control
# its power state from ironic!
ironic node-set-power-state $NODE on
If you make some code changes and want to test their effects, simply stop the services with Ctrl-C and restart them.
Step 5: Fixing your test environment
If you are testing changes that add or remove python entrypoints, or making significant changes to ironic's python modules, or simply keep the virtualenv around for a long time, your development environment may reach an inconsistent state. It may help to delete cached ".pyc" files, update dependencies, reinstall ironic, or even recreate the virtualenv. The following commands may help with that, but are not an exhaustive troubleshooting guide:
# clear cached pyc files
cd ~/ironic/ironic
find ./ -name '*.pyc' | xargs rm
# reinstall ironic modules
cd ~/ironic
source .tox/venv/bin/activate
pip uninstall ironic
pip install -e .
# install and upgrade ironic and all python dependencies
cd ~/ironic
source .tox/venv/bin/activate
pip install -U -e .
Deploying Ironic with DevStack
DevStack may be configured to deploy Ironic, setup Nova to use the Ironic driver and provide hardware resources (network, baremetal compute nodes) using a combination of OpenVSwitch and libvirt. It is highly recommended to deploy on an expendable virtual machine and not on your personal work station. Deploying Ironic with DevStack requires a machine running Ubuntu 14.04 (or later) or Fedora 20 (or later). Make sure your machine is fully up to date and has the latest packages installed before beginning this process.
Note
The devstack "demo" tenant is now granted the "baremetal_observer" role and thereby has read-only access to ironic's API. This is sufficient for all the examples below. Should you want to create or modify bare metal resources directly (ie. through ironic rather than through nova) you will need to use the devstack "admin" tenant.
Devstack will no longer create the user 'stack' with the desired permissions, but does provide a script to perform the task:
git clone https://git.openstack.org/openstack-dev/devstack.git devstack
sudo ./devstack/tools/create-stack-user.sh
Switch to the stack user and clone DevStack:
sudo su - stack
git clone https://git.openstack.org/openstack-dev/devstack.git devstack
Create devstack/local.conf with minimal settings required to enable
Ironic. You can use either of two drivers for deploy: agent_* or pxe_*,
see IPA
for
explanation. An example local.conf that enables both types of drivers
and uses the agent_ipmitool
driver by default:
cd devstack
cat >local.conf <<END
[[local|localrc]]
# Credentials
ADMIN_PASSWORD=password
DATABASE_PASSWORD=password
RABBIT_PASSWORD=password
SERVICE_PASSWORD=password
SERVICE_TOKEN=password
SWIFT_HASH=password
SWIFT_TEMPURL_KEY=password
# Enable Ironic plugin
enable_plugin ironic git://git.openstack.org/openstack/ironic
# Enable Neutron which is required by Ironic and disable nova-network.
disable_service n-net
disable_service n-novnc
enable_service q-svc
enable_service q-agt
enable_service q-dhcp
enable_service q-l3
enable_service q-meta
enable_service neutron
# Enable Swift for agent_* drivers
enable_service s-proxy
enable_service s-object
enable_service s-container
enable_service s-account
# Disable Horizon
disable_service horizon
# Disable Heat
disable_service heat h-api h-api-cfn h-api-cw h-eng
# Disable Cinder
disable_service cinder c-sch c-api c-vol
# Swift temp URL's are required for agent_* drivers.
SWIFT_ENABLE_TEMPURLS=True
# Create 3 virtual machines to pose as Ironic's baremetal nodes.
IRONIC_VM_COUNT=3
IRONIC_VM_SSH_PORT=22
IRONIC_BAREMETAL_BASIC_OPS=True
DEFAULT_INSTANCE_TYPE=baremetal
# Enable Ironic drivers.
IRONIC_ENABLED_DRIVERS=fake,agent_ssh,agent_ipmitool,pxe_ssh,pxe_ipmitool
# Change this to alter the default driver for nodes created by devstack.
# This driver should be in the enabled list above.
IRONIC_DEPLOY_DRIVER=agent_ipmitool
# The parameters below represent the minimum possible values to create
# functional nodes.
IRONIC_VM_SPECS_RAM=1280
IRONIC_VM_SPECS_DISK=10
# Size of the ephemeral partition in GB. Use 0 for no ephemeral partition.
IRONIC_VM_EPHEMERAL_DISK=0
# To build your own IPA ramdisk from source, set this to True
IRONIC_BUILD_DEPLOY_RAMDISK=False
VIRT_DRIVER=ironic
# By default, DevStack creates a 10.0.0.0/24 network for instances.
# If this overlaps with the hosts network, you may adjust with the
# following.
NETWORK_GATEWAY=10.1.0.1
FIXED_RANGE=10.1.0.0/24
FIXED_NETWORK_SIZE=256
# Log all output to files
LOGFILE=$HOME/devstack.log
LOGDIR=$HOME/logs
IRONIC_VM_LOG_DIR=$HOME/ironic-bm-logs
END
Note
Git protocol requires access to port 9418, which is not a standard
port that corporate firewalls always allow. If you are behind a firewall
or on a proxy that blocks Git protocol, modify the
enable_plugin
line to use https://
instead of
git://
and add
GIT_BASE=https://git.openstack.org
to the credentials:
GIT_BASE=https://git.openstack.org
# Enable Ironic plugin enable_plugin ironic https://git.openstack.org/openstack/ironic
Note
The agent_ssh and pxe_ssh drivers are being deprecated in favor of the more production-like agent_ipmitool and pxe_ipmitool drivers. When a *_ipmitool driver is set and IRONIC_IS_HARDWARE variable is false devstack will automatically set up VirtualBMC to control the power state of the virtual baremetal nodes.
Note
When running QEMU as non-root user (e.g. qemu
on Fedora
or libvirt-qemu
on Ubuntu), make sure
IRONIC_VM_LOG_DIR
points to a directory where QEMU will be
able to write. You can verify this with, for example:
# on Fedora
sudo -u qemu touch $HOME/ironic-bm-logs/test.log # on Ubuntu sudo -u libvirt-qemu touch $HOME/ironic-bm-logs/test.log
Note
To check out an in-progress patch for testing, you can add a Git ref
to the enable_plugin
line. For instance:
enable_plugin ironic git://git.openstack.org/openstack/ironic refs/changes/46/295946/15
For a patch in review, you can find the ref to use by clicking the "Download" button in Gerrit. You can also specify a different git repo, or a branch or tag:
enable_plugin ironic https://github.com/openstack/ironic stable/kilo
For more details, see the devstack plugin interface documentation.
Run stack.sh:
./stack.sh
Source credentials, create a key, and spawn an instance as the
demo
user:
source ~/devstack/openrc
# query the image id of the default cirros image
image=$(openstack image show $DEFAULT_IMAGE_NAME -f value -c id)
# create keypair
ssh-keygen
openstack keypair create --public-key ~/.ssh/id_rsa.pub default
# spawn instance
openstack server create --flavor baremetal --image $image --key-name default testing
Note
Because devstack create multiple networks, we need to pass an
additional parameter --nic net-id
to the nova boot command
when using the admin account, for example:
net_id=$(openstack network list | egrep "$PRIVATE_NETWORK_NAME"'[^-]' | awk '{ print $2 }')
openstack server create --flavor baremetal --nic net-id=$net_id --image $image --key-name default testing
You should now see a Nova instance building:
openstack server list
+--------------------------------------+---------+--------+------------+-------------+----------+
| ID | Name | Status | Task State | Power State | Networks |
+--------------------------------------+---------+--------+------------+-------------+----------+
| a2c7f812-e386-4a22-b393-fe1802abd56e | testing | BUILD | spawning | NOSTATE | |
+--------------------------------------+---------+--------+------------+-------------+----------+
Nova will be interfacing with Ironic conductor to spawn the node. On the Ironic side, you should see an Ironic node associated with this Nova instance. It should be powered on and in a 'wait call-back' provisioning state:
openstack baremetal node list
+--------------------------------------+--------------------------------------+-------------+--------------------+
| UUID | Instance UUID | Power State | Provisioning State |
+--------------------------------------+--------------------------------------+-------------+--------------------+
| 9e592cbe-e492-4e4f-bf8f-4c9e0ad1868f | None | power off | None |
| ec0c6384-cc3a-4edf-b7db-abde1998be96 | None | power off | None |
| 4099e31c-576c-48f8-b460-75e1b14e497f | a2c7f812-e386-4a22-b393-fe1802abd56e | power on | wait call-back |
+--------------------------------------+--------------------------------------+-------------+--------------------+
At this point, Ironic conductor has called to libvirt via SSH to power on a virtual machine, which will PXE + TFTP boot from the conductor node and progress through the Ironic provisioning workflow. One libvirt domain should be active now:
sudo virsh list --all
Id Name State
----------------------------------------------------
2 baremetalbrbm_2 running
- baremetalbrbm_0 shut off
- baremetalbrbm_1 shut off
This provisioning process may take some time depending on the performance of the host system, but Ironic should eventually show the node as having an 'active' provisioning state:
openstack baremetal node list
+--------------------------------------+--------------------------------------+-------------+--------------------+
| UUID | Instance UUID | Power State | Provisioning State |
+--------------------------------------+--------------------------------------+-------------+--------------------+
| 9e592cbe-e492-4e4f-bf8f-4c9e0ad1868f | None | power off | None |
| ec0c6384-cc3a-4edf-b7db-abde1998be96 | None | power off | None |
| 4099e31c-576c-48f8-b460-75e1b14e497f | a2c7f812-e386-4a22-b393-fe1802abd56e | power on | active |
+--------------------------------------+--------------------------------------+-------------+--------------------+
This should also be reflected in the Nova instance state, which at this point should be ACTIVE, Running and an associated private IP:
openstack server list
+--------------------------------------+---------+--------+------------+-------------+------------------+
| ID | Name | Status | Task State | Power State | Networks |
+--------------------------------------+---------+--------+------------+-------------+------------------+
| a2c7f812-e386-4a22-b393-fe1802abd56e | testing | ACTIVE | - | Running | private=10.1.0.4 |
+--------------------------------------+---------+--------+------------+-------------+------------------+
The server should now be accessible via SSH:
ssh cirros@10.1.0.4
$
Running Tempest tests
After Deploying Ironic with DevStack one might want to run integration tests against the running cloud. The Tempest project is the project that offers an integration test suite for OpenStack.
First, navigate to Tempest directory:
cd /opt/stack/tempest
To run all tests from the Ironic plugin, execute the following command:
tox -e all-plugin -- ironic
To limit the amount of tests that you would like to run, you can use a regex. For instance, to limit the run to a single test file, the following command can be used:
tox -e all-plugin -- ironic_tempest_plugin.tests.scenario.test_baremetal_basic_ops
Debugging Tempest tests
It is sometimes useful to step through the test code, line by line, especially when the error output is vague. This can be done by running the tests in debug mode and using a debugger such as pdb.
For example, after editing the test_baremetal_basic_ops file
and setting up the pdb traces you can invoke the
run_tempest.sh
script in the Tempest directory with the
following parameters:
./run_tempest.sh -N -d ironic_tempest_plugin.tests.scenario.test_baremetal_basic_ops
- The -N parameter tells the script to run the tests in the local environment (without a virtualenv) so it can find the Ironic tempest plugin.
- The -d parameter enables the debug mode, allowing it to be used with pdb.
For more information about the supported parameters see:
./run_tempest.sh --help
Note
Always be careful when running debuggers in time sensitive code, they may cause timeout errors that weren't there before.
Building developer documentation
If you would like to build the documentation locally, eg. to test your documentation changes before uploading them for review, run these commands to build the documentation set:
On your local machine:
# activate your development virtualenv source .tox/venv/bin/activate # build the docs tox -edocs #Now use your browser to open the top-level index.html located at: ironic/doc/build/html/index.html
On a remote machine:
# Go to the directory that contains the docs cd ~/ironic/doc/source/ # Build the docs tox -edocs # Change directory to the newly built HTML files cd ~/ironic/doc/build/html/ # Create a server using python on port 8000 python -m SimpleHTTPServer 8000 #Now use your browser to open the top-level index.html located at: http://your_ip:8000