# Copyright 2010-2012 OpenStack Foundation # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or # implied. # See the License for the specific language governing permissions and # limitations under the License. r""" Token-based Authentication Middleware. This WSGI component: * Verifies that incoming client requests have valid tokens by validating tokens with the auth service. * Rejects unauthenticated requests unless the auth_token middleware is in ``delay_auth_decision`` mode, which means the final decision is delegated to the downstream WSGI component (usually the OpenStack service). * Collects and forwards identity information based on a valid token such as user name, domain, project, etc. Refer to: https://docs.openstack.org/keystonemiddleware/latest/\ middlewarearchitecture.html Headers ------- The auth_token middleware uses headers sent in by the client on the request and sets headers and environment variables for the downstream WSGI component. Coming in from initial call from client or customer ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ HTTP_X_AUTH_TOKEN The client token being passed in. HTTP_X_SERVICE_TOKEN A service token being passed in. Used for communication between components ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ WWW-Authenticate HTTP header returned to a user indicating which endpoint to use to retrieve a new token. What auth_token adds to the request for use by the OpenStack service ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ When using composite authentication (a user and service token are present) additional service headers relating to the service user will be added. They take the same form as the standard headers but add ``_SERVICE_``. These headers will not exist in the environment if no service token is present. HTTP_X_IDENTITY_STATUS, HTTP_X_SERVICE_IDENTITY_STATUS Will be set to either ``Confirmed`` or ``Invalid``. The underlying service will only see a value of 'Invalid' if the middleware is configured to run in ``delay_auth_decision`` mode. As with all such headers, ``HTTP_X_SERVICE_IDENTITY_STATUS`` will only exist in the environment if a service token is presented. This is different than ``HTTP_X_IDENTITY_STATUS`` which is always set even if no user token is presented. This allows the underlying service to determine if a denial should use ``401 Unauthenticated`` or ``403 Forbidden``. HTTP_OPENSTACK_SYSTEM_SCOPE A string relaying system information about the token's scope. This attribute is only present if the token is system-scoped. The string ``all`` means the token is scoped to the entire deployment system. HTTP_X_DOMAIN_ID, HTTP_X_SERVICE_DOMAIN_ID Identity service managed unique identifier, string. Only present if this is a domain-scoped token. HTTP_X_DOMAIN_NAME, HTTP_X_SERVICE_DOMAIN_NAME Unique domain name, string. Only present if this is a domain-scoped token. HTTP_X_PROJECT_ID, HTTP_X_SERVICE_PROJECT_ID Identity service managed unique identifier, string. Only present if this is a project-scoped token. HTTP_X_PROJECT_NAME, HTTP_X_SERVICE_PROJECT_NAME Project name, unique within owning domain, string. Only present if this is a project-scoped token. HTTP_X_PROJECT_DOMAIN_ID, HTTP_X_SERVICE_PROJECT_DOMAIN_ID Identity service managed unique identifier of owning domain of project, string. Only present if this is a project-scoped v3 token. If this variable is set, this indicates that the PROJECT_NAME can only be assumed to be unique within this domain. HTTP_X_PROJECT_DOMAIN_NAME, HTTP_X_SERVICE_PROJECT_DOMAIN_NAME Name of owning domain of project, string. Only present if this is a project-scoped v3 token. If this variable is set, this indicates that the PROJECT_NAME can only be assumed to be unique within this domain. HTTP_X_USER_ID, HTTP_X_SERVICE_USER_ID Identity-service managed unique identifier, string. HTTP_X_USER_NAME, HTTP_X_SERVICE_USER_NAME User identifier, unique within owning domain, string. HTTP_X_USER_DOMAIN_ID, HTTP_X_SERVICE_USER_DOMAIN_ID Identity service managed unique identifier of owning domain of user, string. If this variable is set, this indicates that the USER_NAME can only be assumed to be unique within this domain. HTTP_X_USER_DOMAIN_NAME, HTTP_X_SERVICE_USER_DOMAIN_NAME Name of owning domain of user, string. If this variable is set, this indicates that the USER_NAME can only be assumed to be unique within this domain. HTTP_X_ROLES, HTTP_X_SERVICE_ROLES Comma delimited list of case-sensitive role names. HTTP_X_IS_ADMIN_PROJECT The string value 'True' or 'False' representing whether the user's token is scoped to the admin project. As historically there was no admin project this will default to True for tokens without this information to be backwards with existing policy files. HTTP_X_SERVICE_CATALOG service catalog (optional, JSON string). For compatibility reasons this catalog will always be in the V2 catalog format even if it is a v3 token. .. note:: This is an exception in that it contains 'SERVICE' but relates to a user token, not a service token. The existing user's catalog can be very large; it was decided not to present a catalog relating to the service token to avoid using more HTTP header space. HTTP_X_TENANT_ID *Deprecated* in favor of HTTP_X_PROJECT_ID. Identity service managed unique identifier, string. For v3 tokens, this will be set to the same value as HTTP_X_PROJECT_ID. HTTP_X_TENANT_NAME *Deprecated* in favor of HTTP_X_PROJECT_NAME. Project identifier, unique within owning domain, string. For v3 tokens, this will be set to the same value as HTTP_X_PROJECT_NAME. HTTP_X_TENANT *Deprecated* in favor of HTTP_X_TENANT_ID and HTTP_X_TENANT_NAME. Identity server-assigned unique identifier, string. For v3 tokens, this will be set to the same value as HTTP_X_PROJECT_ID. HTTP_X_USER *Deprecated* in favor of HTTP_X_USER_ID and HTTP_X_USER_NAME. User name, unique within owning domain, string. HTTP_X_ROLE *Deprecated* in favor of HTTP_X_ROLES. Will contain the same values as HTTP_X_ROLES. Environment Variables ^^^^^^^^^^^^^^^^^^^^^ These variables are set in the request environment for use by the downstream WSGI component. keystone.token_info Information about the token discovered in the process of validation. This may include extended information returned by the token validation call, as well as basic information about the project and user. keystone.token_auth A keystoneauth1 auth plugin that may be used with a :py:class:`keystoneauth1.session.Session`. This plugin will load the authentication data provided to auth_token middleware. Configuration ------------- auth_token middleware configuration can be in the main application's configuration file, e.g. in ``nova.conf``: .. code-block:: ini [keystone_authtoken] auth_plugin = password auth_url = http://keystone:35357/ username = nova user_domain_id = default password = whyarewestillusingpasswords project_name = service project_domain_id = default Configuration can also be in the ``api-paste.ini`` file with the same options, but this is discouraged. Swift ----- When deploy auth_token middleware with Swift, user may elect to use Swift memcache instead of the local auth_token memcache. Swift memcache is passed in from the request environment and it's identified by the ``swift.cache`` key. However it could be different, depending on deployment. To use Swift memcache, you must set the ``cache`` option to the environment key where the Swift cache object is stored. """ import binascii import copy import datetime from keystoneauth1 import access from keystoneauth1 import adapter from keystoneauth1 import discover from keystoneauth1 import exceptions as ksa_exceptions from keystoneauth1 import loading from keystoneauth1.loading import session as session_loading from keystoneclient.common import cms from keystoneclient import exceptions as ksc_exceptions import oslo_cache from oslo_config import cfg from oslo_log import log as logging from oslo_serialization import jsonutils import webob.dec from keystonemiddleware._common import config from keystonemiddleware.auth_token import _auth from keystonemiddleware.auth_token import _base from keystonemiddleware.auth_token import _cache from keystonemiddleware.auth_token import _exceptions as ksm_exceptions from keystonemiddleware.auth_token import _identity from keystonemiddleware.auth_token import _opts from keystonemiddleware.auth_token import _request from keystonemiddleware.auth_token import _revocations from keystonemiddleware.auth_token import _signing_dir from keystonemiddleware.auth_token import _user_plugin from keystonemiddleware.i18n import _ _LOG = logging.getLogger(__name__) _CACHE_INVALID_INDICATOR = 'invalid' oslo_cache.configure(cfg.CONF) AUTH_TOKEN_OPTS = [ (_base.AUTHTOKEN_GROUP, _opts._OPTS + _auth.OPTS + loading.get_auth_common_conf_options()) ] def list_opts(): """Return a list of oslo_config options available in auth_token middleware. The returned list includes all oslo_config options which may be registered at runtime by the project. Each element of the list is a tuple. The first element is the name of the group under which the list of elements in the second element will be registered. A group name of None corresponds to the [DEFAULT] group in config files. NOTE: This function is no longer used for oslo_config sample generation. Some services rely on this function for listing ALL (including deprecated) options and registering them into their own config objects which we do not want for sample config files. See: :py:func:`keystonemiddleware.auth_token._opts.list_opts` for sample config files. :returns: a list of (group_name, opts) tuples """ return [(g, copy.deepcopy(o)) for g, o in AUTH_TOKEN_OPTS] class _BIND_MODE(object): DISABLED = 'disabled' PERMISSIVE = 'permissive' STRICT = 'strict' REQUIRED = 'required' KERBEROS = 'kerberos' def _uncompress_pkiz(token): # TypeError If the signed_text is not zlib compressed binascii.Error if # signed_text has incorrect base64 padding (py34) try: return cms.pkiz_uncompress(token) except (TypeError, binascii.Error): raise ksm_exceptions.InvalidToken(token) class BaseAuthProtocol(object): """A base class for AuthProtocol token checking implementations. :param Callable app: The next application to call after middleware. :param logging.Logger log: The logging object to use for output. By default it will use a logger in the keystonemiddleware.auth_token namespace. :param str enforce_token_bind: The style of token binding enforcement to perform. """ def __init__(self, app, log=_LOG, enforce_token_bind=_BIND_MODE.PERMISSIVE, service_token_roles=None, service_token_roles_required=False): self.log = log self._app = app self._enforce_token_bind = enforce_token_bind self._service_token_roles = set(service_token_roles or []) self._service_token_roles_required = service_token_roles_required self._service_token_warning_emitted = False @webob.dec.wsgify(RequestClass=_request._AuthTokenRequest) def __call__(self, req): """Handle incoming request.""" response = self.process_request(req) if response: return response response = req.get_response(self._app) return self.process_response(response) def process_request(self, request): """Process request. If this method returns a value then that value will be used as the response. The next application down the stack will not be executed and process_response will not be called. Otherwise, the next application down the stack will be executed and process_response will be called with the generated response. By default this method does not return a value. :param request: Incoming request :type request: _request.AuthTokenRequest """ user_auth_ref = None serv_auth_ref = None allow_expired = False if request.service_token: self.log.debug('Authenticating service token') try: _, serv_auth_ref = self._do_fetch_token(request.service_token) self._validate_token(serv_auth_ref) self._confirm_token_bind(serv_auth_ref, request) except ksm_exceptions.InvalidToken: self.log.info('Invalid service token') request.service_token_valid = False else: # FIXME(jamielennox): The new behaviour for service tokens is # that they have to pass the policy check to be allowed. # Previously any token was accepted here. For now we will # continue to mark service tokens as valid if they are valid # but we will only allow service role tokens to do # allow_expired. In future we should reject any token that # isn't a service token here. role_names = set(serv_auth_ref.role_names) check = self._service_token_roles.intersection(role_names) role_check_passed = bool(check) # if service_token_role_required then the service token is only # valid if the roles check out. Otherwise at this point it is # true because keystone has already validated it. if self._service_token_roles_required: request.service_token_valid = role_check_passed else: if not self._service_token_warning_emitted: self.log.warning('A valid token was submitted as ' 'a service token, but it was not ' 'a valid service token. This is ' 'incorrect but backwards ' 'compatible behaviour. This will ' 'be removed in future releases.') # prevent log spam on every single request self._service_token_warning_emitted = True request.service_token_valid = True # allow_expired always requires passing the role check. allow_expired = role_check_passed if request.user_token: self.log.debug('Authenticating user token') try: data, user_auth_ref = self._do_fetch_token( request.user_token, allow_expired=allow_expired) self._validate_token(user_auth_ref, allow_expired=allow_expired) if not request.service_token: self._confirm_token_bind(user_auth_ref, request) except ksm_exceptions.InvalidToken: self.log.info('Invalid user token') request.user_token_valid = False else: request.user_token_valid = True request.token_info = data request.token_auth = _user_plugin.UserAuthPlugin(user_auth_ref, serv_auth_ref) def _validate_token(self, auth_ref, allow_expired=False): """Perform the validation steps on the token. :param auth_ref: The token data :type auth_ref: keystoneauth1.access.AccessInfo :raises exc.InvalidToken: if token is rejected """ # 0 seconds of validity means it is invalid right now if (not allow_expired) and auth_ref.will_expire_soon(stale_duration=0): raise ksm_exceptions.InvalidToken(_('Token authorization failed')) def _do_fetch_token(self, token, **kwargs): """Helper method to fetch a token and convert it into an AccessInfo.""" # NOTE(edmondsw): strip the token to remove any whitespace that may # have been passed along in the header per bug 1689468 token = token.strip() data = self.fetch_token(token, **kwargs) try: return data, access.create(body=data, auth_token=token) except Exception: self.log.warning('Invalid token contents.', exc_info=True) raise ksm_exceptions.InvalidToken(_('Token authorization failed')) def fetch_token(self, token, **kwargs): """Fetch the token data based on the value in the header. Retrieve the data associated with the token value that was in the header. This can be from PKI, contacting the identity server or whatever is required. :param str token: The token present in the request header. :param dict kwargs: Additional keyword arguments may be passed through here to support new features. If an implementation is not aware of how to use these arguments it should ignore them. :raises exc.InvalidToken: if token is invalid. :returns: The token data :rtype: dict """ raise NotImplementedError() def process_response(self, response): """Do whatever you'd like to the response. By default the response is returned unmodified. :param response: Response object :type response: ._request._AuthTokenResponse """ return response def _invalid_user_token(self, msg=False): # NOTE(jamielennox): use False as the default so that None is valid if msg is False: msg = _('Token authorization failed') raise ksm_exceptions.InvalidToken(msg) def _confirm_token_bind(self, auth_ref, req): if self._enforce_token_bind == _BIND_MODE.DISABLED: return # permissive and strict modes don't require there to be a bind permissive = self._enforce_token_bind in (_BIND_MODE.PERMISSIVE, _BIND_MODE.STRICT) if not auth_ref.bind: if permissive: # no bind provided and none required return else: self.log.info('No bind information present in token.') self._invalid_user_token() # get the named mode if bind_mode is not one of the predefined if permissive or self._enforce_token_bind == _BIND_MODE.REQUIRED: name = None else: name = self._enforce_token_bind if name and name not in auth_ref.bind: self.log.info('Named bind mode %s not in bind information', name) self._invalid_user_token() for bind_type, identifier in auth_ref.bind.items(): if bind_type == _BIND_MODE.KERBEROS: if req.auth_type != 'negotiate': self.log.info('Kerberos credentials required and ' 'not present.') self._invalid_user_token() if req.remote_user != identifier: self.log.info('Kerberos credentials do not match ' 'those in bind.') self._invalid_user_token() self.log.debug('Kerberos bind authentication successful.') elif self._enforce_token_bind == _BIND_MODE.PERMISSIVE: self.log.debug('Ignoring Unknown bind for permissive mode: ' '%(bind_type)s: %(identifier)s.', {'bind_type': bind_type, 'identifier': identifier}) else: self.log.info( 'Couldn`t verify unknown bind: %(bind_type)s: ' '%(identifier)s.', {'bind_type': bind_type, 'identifier': identifier}) self._invalid_user_token() class AuthProtocol(BaseAuthProtocol): """Middleware that handles authenticating client calls.""" _SIGNING_CERT_FILE_NAME = 'signing_cert.pem' _SIGNING_CA_FILE_NAME = 'cacert.pem' def __init__(self, app, conf): log = logging.getLogger(conf.get('log_name', __name__)) log.info('Starting Keystone auth_token middleware') self._conf = config.Config('auth_token', _base.AUTHTOKEN_GROUP, list_opts(), conf) if self._conf.oslo_conf_obj != cfg.CONF: oslo_cache.configure(self._conf.oslo_conf_obj) token_roles_required = self._conf.get('service_token_roles_required') if not token_roles_required: log.warning('AuthToken middleware is set with ' 'keystone_authtoken.service_token_roles_required ' 'set to False. This is backwards compatible but ' 'deprecated behaviour. Please set this to True.') super(AuthProtocol, self).__init__( app, log=log, enforce_token_bind=self._conf.get('enforce_token_bind'), service_token_roles=self._conf.get('service_token_roles'), service_token_roles_required=token_roles_required) # delay_auth_decision means we still allow unauthenticated requests # through and we let the downstream service make the final decision self._delay_auth_decision = self._conf.get('delay_auth_decision') self._include_service_catalog = self._conf.get( 'include_service_catalog') self._hash_algorithms = self._conf.get('hash_algorithms') self._auth = self._create_auth_plugin() self._session = self._create_session() self._identity_server = self._create_identity_server() self._www_authenticate_uri = self._conf.get('www_authenticate_uri') if not self._www_authenticate_uri: self._www_authenticate_uri = self._conf.get('auth_uri') if not self._www_authenticate_uri: self.log.warning( 'Configuring www_authenticate_uri to point to the public ' 'identity endpoint is required; clients may not be able to ' 'authenticate against an admin endpoint') # FIXME(dolph): drop support for this fallback behavior as # documented in bug 1207517. self._www_authenticate_uri = \ self._identity_server.www_authenticate_uri self._signing_directory = _signing_dir.SigningDirectory( directory_name=self._conf.get('signing_dir'), log=self.log) self._token_cache = self._token_cache_factory() revocation_cache_timeout = datetime.timedelta( seconds=self._conf.get('revocation_cache_time')) self._revocations = _revocations.Revocations(revocation_cache_timeout, self._signing_directory, self._identity_server, self._cms_verify, self.log) self._check_revocations_for_cached = self._conf.get( 'check_revocations_for_cached') def process_request(self, request): """Process request. Evaluate the headers in a request and attempt to authenticate the request. If authenticated then additional headers are added to the request for use by applications. If not authenticated the request will be rejected or marked unauthenticated depending on configuration. """ request.remove_auth_headers() self._token_cache.initialize(request.environ) resp = super(AuthProtocol, self).process_request(request) if resp: return resp if not request.user_token: # if no user token is present then that's an invalid request request.user_token_valid = False # NOTE(jamielennox): The service status is allowed to be missing if a # service token is not passed. If the service status is missing that's # a valid request. We should find a better way to expose this from the # request object. user_status = request.user_token and request.user_token_valid service_status = request.headers.get('X-Service-Identity-Status', 'Confirmed') if not (user_status and service_status == 'Confirmed'): if self._delay_auth_decision: self.log.debug('Deferring reject downstream') else: self.log.info('Rejecting request') message = _('The request you have made requires ' 'authentication.') body = {'error': { 'code': 401, 'title': 'Unauthorized', 'message': message, }} raise webob.exc.HTTPUnauthorized( body=jsonutils.dumps(body), headers=self._reject_auth_headers, charset='UTF-8', content_type='application/json') if request.user_token_valid: request.set_user_headers(request.token_auth.user) if self._include_service_catalog: request.set_service_catalog_headers(request.token_auth.user) if request.token_auth: request.token_auth._auth = self._auth request.token_auth._session = self._session if request.service_token and request.service_token_valid: request.set_service_headers(request.token_auth.service) if self.log.isEnabledFor(logging.DEBUG): self.log.debug('Received request from %s', request.token_auth._log_format) def process_response(self, response): """Process Response. Add ``WWW-Authenticate`` headers to requests that failed with ``401 Unauthenticated`` so users know where to authenticate for future requests. """ if response.status_int == 401: response.headers.extend(self._reject_auth_headers) return response @property def _reject_auth_headers(self): header_val = 'Keystone uri="%s"' % self._www_authenticate_uri return [('WWW-Authenticate', header_val)] def _token_hashes(self, token): """Generate a list of hashes that the current token may be cached as. With PKI tokens we have multiple hashing algorithms that we test with revocations. This generates that whole list. The first element of this list is the preferred algorithm and is what new cache values should be saved as. :param str token: The token being presented by a user. :returns: list of str token hashes. """ if cms.is_asn1_token(token) or cms.is_pkiz(token): return list(cms.cms_hash_token(token, mode=algo) for algo in self._hash_algorithms) else: return [token] def _cache_get_hashes(self, token_hashes): """Check if the token is cached already. Functions takes a list of hashes that might be in the cache and matches the first one that is present. If nothing is found in the cache it returns None. :returns: token data if found else None. """ for token in token_hashes: cached = self._token_cache.get(token) if cached: return cached def fetch_token(self, token, allow_expired=False): """Retrieve a token from either a PKI bundle or the identity server. :param str token: token id :raises exc.InvalidToken: if token is rejected """ data = None token_hashes = None try: token_hashes = self._token_hashes(token) cached = self._cache_get_hashes(token_hashes) if cached: if cached == _CACHE_INVALID_INDICATOR: self.log.debug('Cached token is marked unauthorized') raise ksm_exceptions.InvalidToken() if self._check_revocations_for_cached: # A token might have been revoked, regardless of initial # mechanism used to validate it, and needs to be checked. self._revocations.check(token_hashes) # NOTE(jamielennox): Cached values used to be stored as a tuple # of data and expiry time. They no longer are but we have to # allow some time to transition the old format so if it's a # tuple just use the data. if len(cached) == 2: cached = cached[0] data = cached else: data = self._validate_offline(token, token_hashes) if not data: data = self._identity_server.verify_token( token, allow_expired=allow_expired) self._token_cache.set(token_hashes[0], data) except (ksa_exceptions.ConnectFailure, ksa_exceptions.RequestTimeout, ksm_exceptions.RevocationListError, ksm_exceptions.ServiceError) as e: self.log.critical('Unable to validate token: %s', e) raise webob.exc.HTTPServiceUnavailable( 'The Keystone service is temporarily unavailable.') except ksm_exceptions.InvalidToken: self.log.debug('Token validation failure.', exc_info=True) if token_hashes: self._token_cache.set(token_hashes[0], _CACHE_INVALID_INDICATOR) self.log.warning('Authorization failed for token') raise return data def _validate_offline(self, token, token_hashes): if cms.is_pkiz(token): token_data = _uncompress_pkiz(token) inform = cms.PKIZ_CMS_FORM elif cms.is_asn1_token(token): token_data = cms.token_to_cms(token) inform = cms.PKI_ASN1_FORM else: # Can't do offline validation for this type of token. return try: self._revocations.check(token_hashes) verified = self._cms_verify(token_data, inform) except ksc_exceptions.CertificateConfigError: self.log.warning('Fetch certificate config failed, ' 'fallback to online validation.') except ksm_exceptions.RevocationListError: self.log.warning('Fetch revocation list failed, ' 'fallback to online validation.') else: self.log.warning('auth_token middleware received a PKI/Z token. ' 'This form of token is deprecated and has been ' 'removed from keystone server and will be ' 'removed from auth_token middleware in the Rocky ' 'release. Please contact your administrator ' 'about upgrading keystone and the token format.') data = jsonutils.loads(verified) audit_ids = None if 'access' in data: # It's a v2 token. audit_ids = data['access']['token'].get('audit_ids') else: # It's a v3 token audit_ids = data['token'].get('audit_ids') if audit_ids: self._revocations.check_by_audit_id(audit_ids) return data def _validate_token(self, auth_ref, **kwargs): super(AuthProtocol, self)._validate_token(auth_ref, **kwargs) if auth_ref.version == 'v2.0' and not auth_ref.project_id: msg = _('Unable to determine service tenancy.') raise ksm_exceptions.InvalidToken(msg) def _cms_verify(self, data, inform=cms.PKI_ASN1_FORM): """Verify the signature of the provided data's IAW CMS syntax. If either of the certificate files might be missing, fetch them and retry. """ def verify(): try: signing_cert_path = self._signing_directory.calc_path( self._SIGNING_CERT_FILE_NAME) signing_ca_path = self._signing_directory.calc_path( self._SIGNING_CA_FILE_NAME) return cms.cms_verify(data, signing_cert_path, signing_ca_path, inform=inform).decode('utf-8') except (ksc_exceptions.CMSError, cms.subprocess.CalledProcessError) as err: self.log.warning('Verify error: %s', err) msg = _('Token authorization failed') raise ksm_exceptions.InvalidToken(msg) try: return verify() except ksc_exceptions.CertificateConfigError: # the certs might be missing; unconditionally fetch to avoid racing self._fetch_signing_cert() self._fetch_ca_cert() try: # retry with certs in place return verify() except ksc_exceptions.CertificateConfigError as err: # if this is still occurring, something else is wrong and we # need err.output to identify the problem self.log.error('CMS Verify output: %s', err.output) raise def _fetch_signing_cert(self): self._signing_directory.write_file( self._SIGNING_CERT_FILE_NAME, self._identity_server.fetch_signing_cert()) def _fetch_ca_cert(self): self._signing_directory.write_file( self._SIGNING_CA_FILE_NAME, self._identity_server.fetch_ca_cert()) def _create_auth_plugin(self): # NOTE(jamielennox): Ideally this would use load_from_conf_options # however that is not possible because we have to support the override # pattern we use in _conf.get. This function therefore does a manual # version of load_from_conf_options with the fallback plugin inline. group = self._conf.get('auth_section') or _base.AUTHTOKEN_GROUP # NOTE(jamielennox): auth_plugin was deprecated to auth_type. _conf.get # doesn't handle that deprecation in the case of conf dict options so # we have to manually check the value plugin_name = (self._conf.get('auth_type', group=group) or self._conf.paste_overrides.get('auth_plugin')) if not plugin_name: return _auth.AuthTokenPlugin( log=self.log, auth_admin_prefix=self._conf.get('auth_admin_prefix', group=group), auth_host=self._conf.get('auth_host', group=group), auth_port=self._conf.get('auth_port', group=group), auth_protocol=self._conf.get('auth_protocol', group=group), identity_uri=self._conf.get('identity_uri', group=group), admin_token=self._conf.get('admin_token', group=group), admin_user=self._conf.get('admin_user', group=group), admin_password=self._conf.get('admin_password', group=group), admin_tenant_name=self._conf.get('admin_tenant_name', group=group) ) # Plugin option registration is normally done as part of the load_from # function rather than the register function so copy here. plugin_loader = loading.get_plugin_loader(plugin_name) plugin_opts = loading.get_auth_plugin_conf_options(plugin_loader) self._conf.oslo_conf_obj.register_opts(plugin_opts, group=group) getter = lambda opt: self._conf.get(opt.dest, group=group) return plugin_loader.load_from_options_getter(getter) def _create_session(self, **kwargs): # NOTE(jamielennox): Loading Session here should be exactly the # same as calling Session.load_from_conf_options(CONF, GROUP) # however we can't do that because we have to use _conf.get to # support the paste.ini options. kwargs.setdefault('cert', self._conf.get('certfile')) kwargs.setdefault('key', self._conf.get('keyfile')) kwargs.setdefault('cacert', self._conf.get('cafile')) kwargs.setdefault('insecure', self._conf.get('insecure')) kwargs.setdefault('timeout', self._conf.get('http_connect_timeout')) kwargs.setdefault('user_agent', self._conf.user_agent) return session_loading.Session().load_from_options(**kwargs) def _create_identity_server(self): adap = adapter.Adapter( self._session, auth=self._auth, service_type='identity', interface='admin', region_name=self._conf.get('region_name'), connect_retries=self._conf.get('http_request_max_retries')) auth_version = self._conf.get('auth_version') if auth_version is not None: auth_version = discover.normalize_version_number(auth_version) return _identity.IdentityServer( self.log, adap, include_service_catalog=self._include_service_catalog, requested_auth_version=auth_version) def _create_oslo_cache(self): # having this as a function makes test mocking easier region = oslo_cache.create_region() oslo_cache.configure_cache_region(self._conf.oslo_conf_obj, region) return region def _token_cache_factory(self): security_strategy = self._conf.get('memcache_security_strategy') cache_kwargs = dict( cache_time=int(self._conf.get('token_cache_time')), env_cache_name=self._conf.get('cache'), memcached_servers=self._conf.get('memcached_servers'), use_advanced_pool=self._conf.get('memcache_use_advanced_pool'), dead_retry=self._conf.get('memcache_pool_dead_retry'), maxsize=self._conf.get('memcache_pool_maxsize'), unused_timeout=self._conf.get('memcache_pool_unused_timeout'), conn_get_timeout=self._conf.get('memcache_pool_conn_get_timeout'), socket_timeout=self._conf.get('memcache_pool_socket_timeout'), ) if security_strategy.lower() != 'none': secret_key = self._conf.get('memcache_secret_key') return _cache.SecureTokenCache(self.log, security_strategy, secret_key, **cache_kwargs) else: return _cache.TokenCache(self.log, **cache_kwargs) def filter_factory(global_conf, **local_conf): """Return a WSGI filter app for use with paste.deploy.""" conf = global_conf.copy() conf.update(local_conf) def auth_filter(app): return AuthProtocol(app, conf) return auth_filter def app_factory(global_conf, **local_conf): conf = global_conf.copy() conf.update(local_conf) return AuthProtocol(None, conf) # NOTE(jamielennox): Maintained here for public API compatibility. InvalidToken = ksm_exceptions.InvalidToken ServiceError = ksm_exceptions.ServiceError ConfigurationError = ksm_exceptions.ConfigurationError RevocationListError = ksm_exceptions.RevocationListError