.. quickstart: =========== Quick Start =========== This guide provides step by step instructions to deploy OpenStack using Kolla Ansible on bare metal servers or virtual machines. Recommended reading ~~~~~~~~~~~~~~~~~~~ It's beneficial to learn basics of both `Ansible `__ and `Docker `__ before running Kolla-Ansible. Host machine requirements ~~~~~~~~~~~~~~~~~~~~~~~~~ The host machine must satisfy the following minimum requirements: - 2 network interfaces - 8GB main memory - 40GB disk space Install dependencies ~~~~~~~~~~~~~~~~~~~~ Typically commands that use the system package manager in this section must be run with root privileges. It is generally recommended to use a virtual environment to install Kolla Ansible and its dependencies, to avoid conflicts with the system site packages. Note that this is independent from the use of a virtual environment for remote execution, which is described in :kolla-ansible-doc:`Virtual Environments `. #. For Ubuntu, update the package index. .. code-block:: console sudo apt-get update #. Install Python build dependencies: For CentOS or RHEL, run: .. code-block:: console sudo yum install python-devel libffi-devel gcc openssl-devel libselinux-python For Ubuntu, run: .. code-block:: console sudo apt-get install python-dev libffi-dev gcc libssl-dev python-selinux python-setuptools Install dependencies using a virtual environment ------------------------------------------------ If not installing Kolla Ansible in a virtual environment, skip this section. #. Install the virtualenv package. For CentOS or RHEL, run: .. code-block:: console sudo yum install python-virtualenv For Ubuntu, run: .. code-block:: console sudo apt-get install python-virtualenv #. Create a virtual environment and activate it: .. code-block:: console virtualenv /path/to/virtualenv source /path/to/virtualenv/bin/activate The virtual environment should be activated before running any commands that depend on packages installed in it. #. Ensure the latest version of pip is installed: .. code-block:: console pip install -U pip #. Install `Ansible `__. Currently, Kolla Ansible requires Ansible 2.5+. .. code-block:: console pip install ansible Install dependencies not using a virtual environment ---------------------------------------------------- If installing Kolla Ansible in a virtual environment, skip this section. #. Install ``pip``. For CentOS or RHEL, run: .. code-block:: console sudo easy_install pip For Ubuntu, run: .. code-block:: console sudo apt-get install python-pip #. Ensure the latest version of pip is installed: .. code-block:: console sudo pip install -U pip #. Install `Ansible `__. Currently, Kolla Ansible requires Ansible 2.5+. For CentOS or RHEL, run: .. code-block:: console sudo yum install ansible For Ubuntu, run: .. code-block:: console sudo apt-get install ansible Install Kolla-ansible ~~~~~~~~~~~~~~~~~~~~~ Install Kolla-ansible for deployment or evaluation -------------------------------------------------- #. Install kolla-ansible and its dependencies using ``pip``. If using a virtual environment: .. code-block:: console pip install kolla-ansible If not using a virtual environment: .. code-block:: console sudo pip install kolla-ansible #. Create the ``/etc/kolla`` directory. .. code-block:: console sudo mkdir -p /etc/kolla sudo chown $USER:$USER /etc/kolla #. Copy ``globals.yml`` and ``passwords.yml`` to ``/etc/kolla`` directory. If using a virtual environment: .. code-block:: console cp -r /path/to/virtualenv/share/kolla-ansible/etc_examples/kolla/* /etc/kolla If not using a virtual environment on CentOS or RHEL, run: .. code-block:: console cp -r /usr/share/kolla-ansible/etc_examples/kolla/* /etc/kolla If not using a virtual environment on Ubuntu, run: .. code-block:: console cp -r /usr/local/share/kolla-ansible/etc_examples/kolla/* /etc/kolla #. Copy ``all-in-one`` and ``multinode`` inventory files to the current directory. If using a virtual environment: .. code-block:: console cp /path/to/virtualenv/share/kolla-ansible/ansible/inventory/* . If not using a virtual environment on CentOS or RHEL, run: .. code-block:: console cp /usr/share/kolla-ansible/ansible/inventory/* . If not using a virtual environment on Ubuntu, run: .. code-block:: console cp /usr/local/share/kolla-ansible/ansible/inventory/* . Install Kolla for development ----------------------------- #. Clone ``kolla`` and ``kolla-ansible`` repositories from git. .. code-block:: console git clone https://github.com/openstack/kolla git clone https://github.com/openstack/kolla-ansible #. Install requirements of ``kolla`` and ``kolla-ansible``: If using a virtual environment: .. code-block:: console pip install -r kolla/requirements.txt pip install -r kolla-ansible/requirements.txt If not using a virtual environment: .. code-block:: console sudo pip install -r kolla/requirements.txt sudo pip install -r kolla-ansible/requirements.txt #. Create the ``/etc/kolla`` directory. .. code-block:: console sudo mkdir -p /etc/kolla sudo chown $USER:$USER /etc/kolla #. Copy the configuration files to ``/etc/kolla`` directory. ``kolla-ansible`` holds the configuration files ( ``globals.yml`` and ``passwords.yml``) in ``etc/kolla``. .. code-block:: console cp -r kolla-ansible/etc/kolla/* /etc/kolla #. Copy the inventory files to the current directory. ``kolla-ansible`` holds inventory files ( ``all-in-one`` and ``multinode``) in the ``ansible/inventory`` directory. .. code-block:: console cp kolla-ansible/ansible/inventory/* . Configure Ansible ~~~~~~~~~~~~~~~~~ For best results, Ansible configuration should be tuned for your environment. For example, add the following options to the Ansible configuration file ``/etc/ansible/ansible.cfg``: .. path /etc/ansible/ansible.cfg .. code-block:: ini [defaults] host_key_checking=False pipelining=True forks=100 Further information on tuning Ansible is available `here `__. Prepare initial configuration ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Inventory --------- The next step is to prepare our inventory file. An inventory is an Ansible file where we specify hosts and the groups that they belong to. We can use this to define node roles and access credentials. Kolla-Ansible comes with ``all-in-one`` and ``multinode`` example inventory files. The difference between them is that the former is ready for deploying single node OpenStack on localhost. If you need to use separate host or more than one node, edit ``multinode`` inventory: #. Edit the first section of ``multinode`` with connection details of your environment, for example: .. code-block:: ini [control] 10.0.0.[10:12] ansible_user=ubuntu ansible_password=foobar ansible_become=true # Ansible supports syntax like [10:12] - that means 10, 11 and 12. # Become clause means "use sudo". [network:children] control # when you specify group_name:children, it will use contents of group specified. [compute] 10.0.0.[13:14] ansible_user=ubuntu ansible_password=foobar ansible_become=true [monitoring] 10.0.0.10 # This group is for monitoring node. # Fill it with one of the controllers' IP address or some others. [storage:children] compute [deployment] localhost ansible_connection=local become=true # use localhost and sudo To learn more about inventory files, check `Ansible documentation `_. #. Check whether the configuration of inventory is correct or not, run: .. code-block:: console ansible -i multinode all -m ping .. note:: Ubuntu might not come with python pre-installed. That will cause errors in ping module. To quickly install python with ansible you can run ``ansible -i multinode all -m raw -a "apt-get -y install python-dev"`` Kolla passwords --------------- Passwords used in our deployment are stored in ``/etc/kolla/passwords.yml`` file. All passwords are blank in this file and have to be filled either manually or by running random password generator: For deployment or evaluation, run: .. code-block:: console kolla-genpwd For development, run: .. code-block:: console cd kolla-ansible/tools ./generate_passwords.py Kolla globals.yml ----------------- ``globals.yml`` is the main configuration file for Kolla-Ansible. There are a few options that are required to deploy Kolla-Ansible: * Image options User has to specify images that are going to be used for our deployment. In this guide `DockerHub `__ provided pre-built images are going to be used. To learn more about building mechanism, please refer :kolla-doc:`Building Container Images `. Kolla provides choice of several Linux distributions in containers: - CentOS - Ubuntu - Oracle Linux - Debian - RHEL For newcomers, we recommend to use CentOS 7 or Ubuntu 18.04. .. code-block:: console kolla_base_distro: "centos" Next "type" of installation needs to be configured. Choices are: binary using repositories like apt or yum source using raw source archives, git repositories or local source directory .. note:: This only affects OpenStack services. Infrastructure services like Ceph are always "binary". .. note:: Source builds are proven to be slightly more reliable than binary. .. code-block:: console kolla_install_type: "source" To use DockerHub images, the default image tag has to be overridden. Images are tagged with release names. For example to use stable Stein images set .. code-block:: console openstack_release: "stein" It's important to use same version of images as kolla-ansible. That means if pip was used to install kolla-ansible, that means it's latest stable version so ``openstack_release`` should be set to stein. If git was used with master branch, DockerHub also provides daily builds of master branch (which is tagged as ``master``): .. code-block:: console openstack_release: "master" * Networking Kolla-Ansible requires a few networking options to be set. We need to set network interfaces used by OpenStack. First interface to set is "network_interface". This is the default interface for multiple management-type networks. .. code-block:: console network_interface: "eth0" Second interface required is dedicated for Neutron external (or public) networks, can be vlan or flat, depends on how the networks are created. This interface should be active without IP address. If not, instances won't be able to access to the external networks. .. code-block:: console neutron_external_interface: "eth1" To learn more about network configuration, refer :kolla-ansible-doc:`Network overview `. Next we need to provide floating IP for management traffic. This IP will be managed by keepalived to provide high availability, and should be set to be *not used* address in management network that is connected to our ``network_interface``. .. code-block:: console kolla_internal_vip_address: "10.1.0.250" * Enable additional services By default Kolla-Ansible provides a bare compute kit, however it does provide support for a vast selection of additional services. To enable them, set ``enable_*`` to "yes". For example, to enable Block Storage service: .. code-block:: console enable_cinder: "yes" Kolla now supports many OpenStack services, there is `a list of available services `_. For more information about service configuration, Please refer to the :kolla-ansible-doc:`Services Reference Guide `. * Virtual environment It is recommended to use a virtual environment to execute tasks on the remote hosts. This is covered :kolla-ansible-doc:`Virtual Environments `. Deployment ~~~~~~~~~~ After configuration is set, we can proceed to the deployment phase. First we need to setup basic host-level dependencies, like docker. Kolla-Ansible provides a playbook that will install all required services in the correct versions. The following assumes the use of the ``multinode`` inventory. If using a different inventory, such as ``all-in-one``, replace the ``-i`` argument accordingly. * For deployment or evaluation, run: #. Bootstrap servers with kolla deploy dependencies: .. code-block:: console kolla-ansible -i ./multinode bootstrap-servers #. Do pre-deployment checks for hosts: .. code-block:: console kolla-ansible -i ./multinode prechecks #. Finally proceed to actual OpenStack deployment: .. code-block:: console kolla-ansible -i ./multinode deploy * For development, run: #. Bootstrap servers with kolla deploy dependencies: .. code-block:: console cd kolla-ansible/tools ./kolla-ansible -i ../../multinode bootstrap-servers #. Do pre-deployment checks for hosts: .. code-block:: console ./kolla-ansible -i ../../multinode prechecks #. Finally proceed to actual OpenStack deployment: .. code-block:: console ./kolla-ansible -i ../../multinode deploy When this playbook finishes, OpenStack should be up, running and functional! If error occurs during execution, refer to :kolla-ansible-doc:`troubleshooting guide `. Using OpenStack ~~~~~~~~~~~~~~~ #. Install the OpenStack CLI client: .. code-block:: console pip install python-openstackclient #. OpenStack requires an openrc file where credentials for admin user are set. To generate this file: * For deployment or evaluation, run: .. code-block:: console kolla-ansible post-deploy . /etc/kolla/admin-openrc.sh * For development, run: .. code-block:: console cd kolla-ansible/tools ./kolla-ansible post-deploy . /etc/kolla/admin-openrc.sh #. Depending on how you installed Kolla-Ansible, there is a script that will create example networks, images, and so on. * For deployment or evaluation, run ``init-runonce`` script on CentOS or RHEL: .. code-block:: console /usr/share/kolla-ansible/init-runonce Run ``init-runonce`` script on Ubuntu: .. code-block:: console /usr/local/share/kolla-ansible/init-runonce * For development, run: .. code-block:: console kolla-ansible/tools/init-runonce