corrects Kubernetes Services handlers

The handlers that need to be enabled to correctly handle
Kubernetes Services events are (endpoints,service,kuryrloadbalancer)
and not (lb,lbaasspec) as placed in most of the docs.
This was due to the recent movement to KuryrLoadBalancer custom
resources definitions (CRD).

Change-Id: I0eff3b68839a659d39650e2cb22956e30d2c7332
Closes-Bug: #1899013

devstack/local.conf.odl.sample

@@ -160,7 +160,7 @@ enable_service kuryr-daemon
 # By default, some Kuryr Handlers are set for DevStack installation. This can be
 # further tweaked in order to enable additional ones such as Network Policy. If
 # you want to add additional handlers those can be set here:
-# KURYR_ENABLED_HANDLERS = vif,lb,lbaasspec
+# KURYR_ENABLED_HANDLERS = vif,endpoints,service,kuryrloadbalancer,kuryrport
 
 # Kuryr Ports Pools
 # =================

devstack/local.conf.openshift.sample

@@ -158,8 +158,7 @@ enable_service kuryr-daemon
 # By default, some Kuryr Handlers are set for DevStack installation. This can be
 # further tweaked in order to enable additional ones such as Network Policy. If
 # you want to add additional handlers those can be set here:
-# KURYR_ENABLED_HANDLERS = vif,lb,lbaasspec
+# KURYR_ENABLED_HANDLERS = vif,endpoints,service,kuryrloadbalancer,kuryrport
-
 # Kuryr Ports Pools
 # =================
 #

devstack/local.conf.ovn.sample

@@ -208,8 +208,7 @@ KURYR_K8S_CONTAINERIZED_DEPLOYMENT=True
 # By default, some Kuryr Handlers are set for DevStack installation. This can be
 # further tweaked in order to enable additional ones such as Network Policy. If
 # you want to add additional handlers those can be set here:
-# KURYR_ENABLED_HANDLERS = vif,lb,lbaasspec
+# KURYR_ENABLED_HANDLERS = vif,endpoints,service,kuryrloadbalancer,kuryrport
-
 # Kuryr Ports Pools
 # =================
 #

devstack/local.conf.sample

@@ -188,7 +188,7 @@ enable_service kuryr-daemon
 # By default, some Kuryr Handlers are set for DevStack installation. This can be
 # further tweaked in order to enable additional ones such as Network Policy. If
 # you want to add additional handlers those can be set here:
-# KURYR_ENABLED_HANDLERS = vif,lb,lbaasspec
+# KURYR_ENABLED_HANDLERS = vif,endpoints,service,kuryrloadbalancer,kuryrport
 
 # Kuryr Ports Pools
 # =================

doc/source/devref/kuryr_kubernetes_design.rst

@@ -178,8 +178,8 @@ currently includes the following:
 ================  =========================
 vif               Pod
 kuryrport         KuryrPort CRD
-lb                Endpoint
+endpoints         Endpoint
-lbaasspec         Service
+service           Service
 ================  =========================
 
 For example, to enable only the 'vif' controller handler we should set the

doc/source/installation/network_namespace.rst

@@ -13,7 +13,8 @@ the next steps are needed:
    .. code-block:: ini
 
       [kubernetes]
-      enabled_handlers=vif,lb,lbaasspec,namespace,kuryrnetwork,kuryrport
+      enabled_handlers=vif,endpoints,service,kuryrloadbalancer,namespace,
+                       kuryrnetwork,kuryrport
 
    Note that if you also want to enable prepopulation of ports pools upon new
    namespace creation, you need to also add the kuryrnetwork_population
@@ -22,7 +23,8 @@ the next steps are needed:
    .. code-block:: ini
 
       [kubernetes]
-      enabled_handlers=vif,lb,lbaasspec,namespace,kuryrnetwork,kuryrport,kuryrnetwork_population
+      enabled_handlers=vif,endpoints,service,kuryrloadbalancer,namespace,
+                       kuryrnetwork,kuryrport,kuryrnetwork_population
 
 #. Enable the namespace subnet driver by modifying the default
    pod_subnet_driver option at kuryr.conf:
@@ -73,7 +75,8 @@ to add the namespace handler and state the namespace subnet driver with:
 .. code-block:: console
 
    KURYR_SUBNET_DRIVER=namespace
-   KURYR_ENABLED_HANDLERS=vif,lb,lbaasspec,namespace,kuryrnetwork,kuryrport
+   KURYR_ENABLED_HANDLERS=vif,endpoints,service,kuryrloadbalancer,namespace,
+                          kuryrnetwork,kuryrport
 
 .. note::
 

doc/source/installation/network_policy.rst

@@ -10,7 +10,9 @@ be found  at :doc:`./devstack/containerized`):
 .. code-block:: ini
 
    [kubernetes]
-   enabled_handlers=vif,lb,lbaasspec,policy,pod_label,namespace,kuryrnetwork,kuryrnetworkpolicy,kuryrport
+   enabled_handlers=vif,endpoints,service,kuryrloadbalancer,policy,
+                    pod_label,namespace,kuryrnetwork,kuryrnetworkpolicy,
+                    kuryrport
 
 Note that if you also want to enable prepopulation of ports pools upon new
 namespace creation, you need to also dd the kuryrnetwork_population handler
@@ -19,7 +21,9 @@ namespace creation, you need to also dd the kuryrnetwork_population handler
 .. code-block:: ini
 
    [kubernetes]
-   enabled_handlers=vif,lb,lbaasspec,policy,pod_label,namespace,kuryrnetworkpolicy,kuryrnetwork,kuryrnetwork_population,kuryrport
+   enabled_handlers=vif,endpoints,service,kuryrloadbalancer,policy,
+                    pod_label,namespace,kuryrnetworkpolicy,kuryrnetwork,
+                    kuryrport,kuryrnetwork_population
 
 After that, enable also the security group drivers for policies:
 
@@ -82,7 +86,7 @@ to add the policy, pod_label and namespace handler and drivers with:
 
 .. code-block:: bash
 
-   KURYR_ENABLED_HANDLERS=vif,lb,lbaasspec,policy,pod_label,namespace,kuryrnetworkpolicy,kuryrport
+   KURYR_ENABLED_HANDLERS=vif,endpoints,service,kuryrloadbalancer,policy,pod_label,namespace,kuryrnetworkpolicy,kuryrport
    KURYR_SG_DRIVER=policy
    KURYR_SUBNET_DRIVER=namespace
 

doc/source/installation/ports-pool.rst

@@ -169,7 +169,8 @@ subnet), the next handler needs to be enabled:
 .. code-block:: ini
 
    [kubernetes]
-   enabled_handlers=vif,lb,lbaasspec,namespace,*kuryrnetwork*
+   enabled_handlers=vif,endpoints,service,kuryrloadbalancer,namespace,
+                    *kuryrnetwork*
 
 
 This can be enabled at devstack deployment time to by adding the next to the
@@ -177,4 +178,5 @@ local.conf:
 
 .. code-block:: bash
 
-   KURYR_ENABLED_HANDLERS=vif,lb,lbaasspec,namespace,*kuryrnetwork*
+   KURYR_ENABLED_HANDLERS=vif,endpoints,service,kuryrloadbalancer,namespace,
+                          *kuryrnetwork*

kuryr_kubernetes/config.py

@@ -179,7 +179,8 @@ k8s_opts = [
     cfg.ListOpt('enabled_handlers',
                 help=_("The comma-separated handlers that should be "
                        "registered for watching in the pipeline."),
-                default=['vif', 'lb', 'lbaasspec']),
+                default=['vif', 'endpoints', 'service', 'kuryrloadbalancer',
+                         'kuryrport']),
     cfg.BoolOpt('controller_ha',
                 help=_('Enable kuryr-controller active/passive HA. Only '
                        'supported in containerized deployments on Kubernetes '